| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
trace__btf_scnprintf()
Since we'll need it later in the current patch series and we can get the
syscall_arg_fmt from syscall_arg->fmt.
Based-on-a-patch-by: Howard Chu <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Namhyung Kim <[email protected]>
Link: https://lore.kernel.org/lkml/Zsd8vqCrTh5h69rp@x1
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
'perf trace -p <PID>' work on a syscall that is unaugmented, but doesn't
work on a syscall that's augmented (when it calls perf_event_output() in
BPF).
Let's take open() as an example. open() is augmented in perf trace.
Before:
$ perf trace -e open -p 3792392
? ( ): ... [continued]: open()) = -1 ENOENT (No such file or directory)
? ( ): ... [continued]: open()) = -1 ENOENT (No such file or directory)
We can see there's no output.
After:
$ perf trace -e open -p 3792392
0.000 ( 0.123 ms): a.out/3792392 open(filename: "DINGZHEN", flags: WRONLY) = -1 ENOENT (No such file or directory)
1000.398 ( 0.116 ms): a.out/3792392 open(filename: "DINGZHEN", flags: WRONLY) = -1 ENOENT (No such file or directory)
Reason:
bpf_perf_event_output() will fail when you specify a pid in 'perf trace' (EOPNOTSUPP).
When using 'perf trace -p 114', before perf_event_open(), we'll have PID
= 114, and CPU = -1.
This is bad for bpf-output event, because the ring buffer won't accept
output from BPF's perf_event_output(), making it fail. I'm still trying
to find out why.
If we open bpf-output for every cpu, instead of setting it to -1, like
this:
PID = <PID>, CPU = 0
PID = <PID>, CPU = 1
PID = <PID>, CPU = 2
PID = <PID>, CPU = 3
Everything works.
You can test it with this script (open.c):
#include <unistd.h>
#include <sys/syscall.h>
int main()
{
int i1 = 1, i2 = 2, i3 = 3, i4 = 4;
char s1[] = "DINGZHEN", s2[] = "XUEBAO";
while (1) {
syscall(SYS_open, s1, i1, i2);
sleep(1);
}
return 0;
}
save, compile:
make open
perf trace:
perf trace -e open <path-to-the-executable>
Signed-off-by: Howard Chu <[email protected]>
Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Namhyung Kim <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
We'll use it in the next patch, to deciding how to set up the ring
buffer.
Signed-off-by: Howard Chu <[email protected]>
Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Namhyung Kim <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
In stats mode PERF_RECORD_EVENT_UPDATE isn't being handled meaning the
evsels aren't named when handling pipe mode output.
Before:
$ perf record -e inst_retired.any -a -o - sleep 0.1|perf report --stats -i -
...
Aggregated stats:
TOTAL events: 23358
COMM events: 2608 (11.2%)
EXIT events: 1 ( 0.0%)
FORK events: 2607 (11.2%)
SAMPLE events: 174 ( 0.7%)
MMAP2 events: 17936 (76.8%)
ATTR events: 2 ( 0.0%)
FINISHED_ROUND events: 2 ( 0.0%)
ID_INDEX events: 1 ( 0.0%)
THREAD_MAP events: 1 ( 0.0%)
CPU_MAP events: 1 ( 0.0%)
EVENT_UPDATE events: 3 ( 0.0%)
TIME_CONV events: 1 ( 0.0%)
FEATURE events: 20 ( 0.1%)
FINISHED_INIT events: 1 ( 0.0%)
raw 0xc0 stats:
SAMPLE events: 174
After:
$ perf record -e inst_retired.any -a -o - sleep 0.1|perf report --stats -i -
...
Aggregated stats:
TOTAL events: 23742
COMM events: 2620 (11.0%)
EXIT events: 2 ( 0.0%)
FORK events: 2619 (11.0%)
SAMPLE events: 165 ( 0.7%)
MMAP2 events: 18304 (77.1%)
ATTR events: 2 ( 0.0%)
FINISHED_ROUND events: 2 ( 0.0%)
ID_INDEX events: 1 ( 0.0%)
THREAD_MAP events: 1 ( 0.0%)
CPU_MAP events: 1 ( 0.0%)
EVENT_UPDATE events: 3 ( 0.0%)
TIME_CONV events: 1 ( 0.0%)
FEATURE events: 20 ( 0.1%)
FINISHED_INIT events: 1 ( 0.0%)
inst_retired.any stats:
SAMPLE events: 165
This makes the pipe output match the regular output.
Signed-off-by: Ian Rogers <[email protected]>
Acked-by: Namhyung Kim <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
tools/perf' target
Signed-off-by: Michael Petlan <[email protected]>
Cc: Athira Rajeev <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Masami Hiramatsu <[email protected]>
Cc: Namhyung Kim <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Veronika Molnarova <[email protected]>
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Add a new 'perf report' test case that acts as an entry element in 'perf
test list'.
Runs multiple subtests from directory "base_report", which can be
expanded without further editing.
Signed-off-by: Veronika Molnarova <[email protected]>
Cc: Athira Rajeev <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Masami Hiramatsu <[email protected]>
Cc: Namhyung Kim <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Michael Petlan <[email protected]>
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Test basic execution and some options of perf-report subcommand, like
show-nr-samples, header, showcpuutilization, pid and symbol filtering.
Signed-off-by: Veronika Molnarova <[email protected]>
Cc: Athira Rajeev <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Masami Hiramatsu <[email protected]>
Cc: Namhyung Kim <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Michael Petlan <[email protected]>
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
As a form of validation, it is a common practice to check the outputs
of commands whether they contain expected patterns or match a certain
regular expression.
This output checking helper is designed to allow checking stderr output
of perf commands for unexpected messages, while ignoring messages that
are known to be harmless, e.g.:
"Lowering default frequency rate to \d+\."
"\d+ out of order events recorded."
etc.
Signed-off-by: Veronika Molnarova <[email protected]>
Cc: Athira Rajeev <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Masami Hiramatsu <[email protected]>
Cc: Namhyung Kim <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Michael Petlan <[email protected]>
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The perf-probe command uses a specific semantics to describe probes.
Test some patterns that are known to be both valid and invalid if
they are handled appropriately.
This test is run as a part of perftool-testsuite_probe test case.
Signed-off-by: Veronika Molnarova <[email protected]>
Cc: Athira Rajeev <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Masami Hiramatsu <[email protected]>
Cc: Namhyung Kim <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Michael Petlan <[email protected]>
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Test if various incompatible options are correctly handled-rejected.
It is run as a part of perftool-testsuite_probe test case.
Signed-off-by: Veronika Molnarova <[email protected]>
Cc: Athira Rajeev <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Masami Hiramatsu <[email protected]>
Cc: Namhyung Kim <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Michael Petlan <[email protected]>
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Test basic behavior of perf-probe subcommand. It is run as a part of
perftool-testsuite_probe test case.
Signed-off-by: Veronika Molnarova <[email protected]>
Cc: Athira Rajeev <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Masami Hiramatsu <[email protected]>
Cc: Namhyung Kim <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Michael Petlan <[email protected]>
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Test perf probe interface. Blacklisted functions should be rejected
when there is an attempt to set a kprobe to them.
Signed-off-by: Veronika Molnarova <[email protected]>
Cc: Athira Rajeev <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Masami Hiramatsu <[email protected]>
Cc: Namhyung Kim <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Michael Petlan <[email protected]>
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Shellcheck is becoming a standard when building perf to prevent
any unnecessary mistakes. Fix shellcheck warnings in perf testsuite.
Signed-off-by: Veronika Molnarova <[email protected]>
Cc: Athira Rajeev <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Masami Hiramatsu <[email protected]>
Cc: Namhyung Kim <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Michael Petlan <[email protected]>
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Merge perf testsuite setting files into common settings to reduce
duplicates and prevent errors.
Signed-off-by: Michael Petlan <[email protected]>
Signed-off-by: Veronika Molnarova <[email protected]>
Cc: Athira Rajeev <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Masami Hiramatsu <[email protected]>
Cc: Namhyung Kim <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The test scripts in base_* directories currently have their own drivers
that run them. Before this patch, the shell test-suite generator causes
them to run twice. Fix that by skipping them in the generator.
A cleaner solution (for future) will be to use the directory structure
idea (introduced by Carsten Haitzler in 7391db645938 ("perf test:
Refactor shell tests allowing subdirs")) to generate test entries with
subtests, like:
$ perf test list
[...]
97: perf probe shell tests
97:1: perf probe basic functionality
97:2: perf probe tests with arguments
97:3: perf probe invalid options handling
[...]
There is already a lot of shell test scripts and many are about to come,
so there is a need for some hierarchy.
Signed-off-by: Michael Petlan <[email protected]>
Cc: Athira Rajeev <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Masami Hiramatsu <[email protected]>
Cc: Namhyung Kim <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Veronika Molnarova <[email protected]>
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The getname_flags() routine changed recently and thus the place where we
were getting the pathname is not probeable anymore, albeit still
present, so use the next line for that, before:
root@number:/home/acme/git/perf-tools-next# perf test vfs_getname
91: Add vfs_getname probe to get syscall args filenames : FAILED!
93: Use vfs_getname probe to get syscall args filenames : FAILED!
126: Check open filename arg using perf trace + vfs_getname : FAILED!
root@number:/home/acme/git/perf-tools-next#
Now tests 91 and 126 are passing, some more investigation is needed for
test 93, that continues to fail.
Cc: Adrian Hunter <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Namhyung Kim <[email protected]>
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Add Multiple bpf-filter test for two or more events with filters.
It uses task-clock and page-faults events with different filter
expressions and check the perf script output
$ sudo ./perf test filtering -vv
96: perf record sample filtering (by BPF) tests:
--- start ---
test child forked, pid 2804025
Checking BPF-filter privilege
Basic bpf-filter test
Basic bpf-filter test [Success]
Failing bpf-filter test
Error: task-clock event does not have PERF_SAMPLE_CPU
Failing bpf-filter test [Success]
Group bpf-filter test
Error: task-clock event does not have PERF_SAMPLE_CPU
Error: task-clock event does not have PERF_SAMPLE_CODE_PAGE_SIZE
Group bpf-filter test [Success]
Multiple bpf-filter test
Multiple bpf-filter test [Success]
---- end(0) ----
96: perf record sample filtering (by BPF) tests : Ok
Signed-off-by: Namhyung Kim <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: KP Singh <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Song Liu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Print the actual dropped sample count in the event stat.
$ sudo perf record -o- -e cycles --filter 'period < 10000' \
-e instructions --filter 'ip > 0x8000000000000000' perf test -w noploop | \
perf report --stat -i-
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.058 MB - ]
Aggregated stats:
TOTAL events: 469
MMAP events: 268 (57.1%)
COMM events: 2 ( 0.4%)
EXIT events: 1 ( 0.2%)
SAMPLE events: 16 ( 3.4%)
MMAP2 events: 22 ( 4.7%)
LOST_SAMPLES events: 2 ( 0.4%)
KSYMBOL events: 89 (19.0%)
BPF_EVENT events: 39 ( 8.3%)
ATTR events: 2 ( 0.4%)
FINISHED_ROUND events: 1 ( 0.2%)
ID_INDEX events: 1 ( 0.2%)
THREAD_MAP events: 1 ( 0.2%)
CPU_MAP events: 1 ( 0.2%)
EVENT_UPDATE events: 2 ( 0.4%)
TIME_CONV events: 1 ( 0.2%)
FEATURE events: 20 ( 4.3%)
FINISHED_INIT events: 1 ( 0.2%)
cycles stats:
SAMPLE events: 2
LOST_SAMPLES (BPF) events: 4010
instructions stats:
SAMPLE events: 14
LOST_SAMPLES (BPF) events: 3990
Signed-off-by: Namhyung Kim <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: KP Singh <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Song Liu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
So far it used tgid as a key to get the filter expressions in the
pinned filters map for regular users but it won't work well if the has
more than one filters at the same time. Let's add the event id to the
key of the filter hash map so that it can identify the right filter
expression in the BPF program.
As the event can be inherited to child tasks, it should use the primary
id which belongs to the parent (original) event. Since evsel opens the
event for multiple CPUs and tasks, it needs to maintain a separate hash
map for the event id.
In the user space, it keeps a list for the multiple evsel and release
the entries in the both hash map when it closes the event.
Signed-off-by: Namhyung Kim <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: KP Singh <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Song Liu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Perf crashes as below when applying --no-group
# perf record -e "{cache-misses,branches"} -b sleep 1
# perf report --stdio --no-group
free(): invalid next size (fast)
Aborted (core dumped)
#
In the __hpp__fmt(), only 1 hpp_fmt_value is allocated for the current
event when --no-group is applied.
However, the current implementation tries to assign the hists from all
members to the hpp_fmt_value, which exceeds the allocated memory.
Fixes: 8f6071a3dce40e69 ("perf hist: Simplify __hpp_fmt() using hpp_fmt_data")
Signed-off-by: Kan Liang <[email protected]>
Acked-by: Namhyung Kim <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Extend the searching for the test files so that it works when running
perf from a separate objdir, and also when the perf executable is
symlinked.
Signed-off-by: Andi Kleen <[email protected]>
Acked-by: Namhyung Kim <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Namhyung Kim <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The -Wcast-function-type-mismatch option was introduced in clang 19 and
its enabled by default, since we use -Werror, and python bindings do
casts that are valid but trips this warning, disable it if present.
Closes: https://lore.kernel.org/all/CA+icZUXoJ6BS3GMhJHV3aZWyb5Cz2haFneX0C5pUMUUhG-UVKQ@mail.gmail.com
Reported-by: Sedat Dilek <[email protected]>
Tested-by: Sedat Dilek <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Nathan Chancellor <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: [email protected] # To allow building with the upcoming clang 19
Link: https://lore.kernel.org/lkml/CA+icZUVtHn8X1Tb_Y__c-WswsO0K8U9uy3r2MzKXwTA5THtL7w@mail.gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
We'll need to check if an warning option introduced in clang 19 is
available on the clang version being used, so cover the error message
emitted when testing for a -W option.
Tested-by: Sedat Dilek <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Nathan Chancellor <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/lkml/CA+icZUVtHn8X1Tb_Y__c-WswsO0K8U9uy3r2MzKXwTA5THtL7w@mail.gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
In some cases, compilers don't set the location expression in DWARF
precisely. For instance, it may assign a variable to a register after
copying it from a different register. Then it should use the register
for the new type but still uses the old register. This makes hard to
track the type information properly.
This is an example I found in __tcp_transmit_skb(). The first argument
(sk) of this function is a pointer to sock and there's a variable (tp)
for tcp_sock.
static int __tcp_transmit_skb(struct sock *sk, struct sk_buff *skb,
int clone_it, gfp_t gfp_mask, u32 rcv_nxt)
{
...
struct tcp_sock *tp;
BUG_ON(!skb || !tcp_skb_pcount(skb));
tp = tcp_sk(sk);
prior_wstamp = tp->tcp_wstamp_ns;
tp->tcp_wstamp_ns = max(tp->tcp_wstamp_ns, tp->tcp_clock_cache);
...
So it basically calls tcp_sk(sk) to get the tcp_sock pointer from sk.
But it turned out to be the same value because tcp_sock embeds sock as
the first member. The sk is located in reg5 (RDI) and tp is in reg3
(RBX). The offset of tcp_wstamp_ns is 0x748 and tcp_clock_cache is
0x750. So you need to use RBX (reg3) to access the fields in the
tcp_sock. But the code used RDI (reg5) as it has the same value.
$ pahole --hex -C tcp_sock vmlinux | grep -e 748 -e 750
u64 tcp_wstamp_ns; /* 0x748 0x8 */
u64 tcp_clock_cache; /* 0x750 0x8 */
And this is the disassembly of the part of the function.
<__tcp_transmit_skb>:
...
44: mov %rdi, %rbx
47: mov 0x748(%rdi), %rsi
4e: mov 0x750(%rdi), %rax
55: cmp %rax, %rsi
Because compiler put the debug info to RBX, it only knows RDI is a
pointer to sock and accessing those two fields resulted in error
due to offset being beyond the type size.
-----------------------------------------------------------
find data type for 0x748(reg5) at __tcp_transmit_skb+0x63
CU for net/ipv4/tcp_output.c (die:0x817f543)
frame base: cfa=0 fbreg=6
scope: [1/1] (die:81aac3e)
bb: [0 - 30]
var [0] -0x98(stack) type='struct tcp_out_options' size=0x28 (die:0x81af3df)
var [5] reg8 type='unsigned int' size=0x4 (die:0x8180ed6)
var [5] reg2 type='unsigned int' size=0x4 (die:0x8180ed6)
var [5] reg1 type='int' size=0x4 (die:0x818059e)
var [5] reg4 type='struct sk_buff*' size=0x8 (die:0x8181360)
var [5] reg5 type='struct sock*' size=0x8 (die:0x8181a0c) <<<--- the first argument ('sk' at %RDI)
mov [19] reg8 -> -0xa8(stack) type='unsigned int' size=0x4 (die:0x8180ed6)
mov [20] stack canary -> reg0
mov [29] reg0 -> -0x30(stack) stack canary
bb: [36 - 3e]
mov [36] reg4 -> reg15 type='struct sk_buff*' size=0x8 (die:0x8181360)
bb: [44 - 63]
mov [44] reg5 -> reg3 type='struct sock*' size=0x8 (die:0x8181a0c) <<<--- calling tcp_sk()
var [47] reg3 type='struct tcp_sock*' size=0x8 (die:0x819eead) <<<--- new variable ('tp' at %RBX)
var [4e] reg4 type='unsigned long long' size=0x8 (die:0x8180edd)
mov [58] reg4 -> -0xc0(stack) type='unsigned long long' size=0x8 (die:0x8180edd)
chk [63] reg5 offset=0x748 ok=1 kind=1 (struct sock*) : offset bigger than size <<<--- access with old variable
final result: offset bigger than size
While it's a fault in the compiler, we could work around this issue by
using the type of new variable when it's copied directly. So I've added
copied_from field in the register state to track those direct register
to register copies. After that new register gets a new type and the old
register still has the same type, it'll update (copy it back) the type
of the old register.
For example, if we can update type of reg5 at __tcp_transmit_skb+0x47,
we can find the target type of the instruction at 0x63 like below:
-----------------------------------------------------------
find data type for 0x748(reg5) at __tcp_transmit_skb+0x63
...
bb: [44 - 63]
mov [44] reg5 -> reg3 type='struct sock*' size=0x8 (die:0x8181a0c)
var [47] reg3 type='struct tcp_sock*' size=0x8 (die:0x819eead)
var [47] copyback reg5 type='struct tcp_sock*' size=0x8 (die:0x819eead) <<<--- here
mov [47] 0x748(reg5) -> reg4 type='unsigned long long' size=0x8 (die:0x8180edd)
mov [4e] 0x750(reg5) -> reg0 type='unsigned long long' size=0x8 (die:0x8180edd)
mov [58] reg4 -> -0xc0(stack) type='unsigned long long' size=0x8 (die:0x8180edd)
chk [63] reg5 offset=0x748 ok=1 kind=1 (struct tcp_sock*) : Good! <<<--- new type
found by insn track: 0x748(reg5) type-offset=0x748
final result: type='struct tcp_sock' size=0xa98 (die:0x819eeb2)
Signed-off-by: Namhyung Kim <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Athira Rajeev <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
When checking the match variable at the target instruction, it might not
have any information if it's a first write to a stack slot. In this
case it could spill a register value into the stack so the type info is
in the source operand.
But currently it's hard to get the operand from the checking function.
Let's process the instruction and retry to get the type info from the
stack if there's no information already.
This is an example of __tcp_transmit_skb(). The instructions are
<__tcp_transmit_skb>:
0: nopl 0x0(%rax, %rax, 1)
5: push %rbp
6: mov %rsp, %rbp
9: push %r15
b: push %r14
d: push %r13
f: push %r12
11: push %rbx
12: sub $0x98, %rsp
19: mov %r8d, -0xa8(%rbp)
...
It cannot find any variable at -0xa8(%rbp) at this point.
-----------------------------------------------------------
find data type for -0xa8(reg6) at __tcp_transmit_skb+0x19
CU for net/ipv4/tcp_output.c (die:0x817f543)
frame base: cfa=0 fbreg=6
scope: [1/1] (die:81aac3e)
bb: [0 - 19]
var [0] -0x98(stack) type='struct tcp_out_options' size=0x28 (die:0x81af3df)
var [5] reg8 type='unsigned int' size=0x4 (die:0x8180ed6)
var [5] reg2 type='unsigned int' size=0x4 (die:0x8180ed6)
var [5] reg1 type='int' size=0x4 (die:0x818059e)
var [5] reg4 type='struct sk_buff*' size=0x8 (die:0x8181360)
var [5] reg5 type='struct sock*' size=0x8 (die:0x8181a0c)
chk [19] reg6 offset=-0xa8 ok=0 kind=0 fbreg : no type information
no type information
And it was able to find the type after processing the 'mov' instruction.
-----------------------------------------------------------
find data type for -0xa8(reg6) at __tcp_transmit_skb+0x19
CU for net/ipv4/tcp_output.c (die:0x817f543)
frame base: cfa=0 fbreg=6
scope: [1/1] (die:81aac3e)
bb: [0 - 19]
var [0] -0x98(stack) type='struct tcp_out_options' size=0x28 (die:0x81af3df)
var [5] reg8 type='unsigned int' size=0x4 (die:0x8180ed6)
var [5] reg2 type='unsigned int' size=0x4 (die:0x8180ed6)
var [5] reg1 type='int' size=0x4 (die:0x818059e)
var [5] reg4 type='struct sk_buff*' size=0x8 (die:0x8181360)
var [5] reg5 type='struct sock*' size=0x8 (die:0x8181a0c)
chk [19] reg6 offset=-0xa8 ok=0 kind=0 fbreg : retry <<<--- here
mov [19] reg8 -> -0xa8(stack) type='unsigned int' size=0x4 (die:0x8180ed6)
chk [19] reg6 offset=-0xa8 ok=0 kind=0 fbreg : Good!
found by insn track: -0xa8(reg6) type-offset=0
final result: type='unsigned int' size=0x4 (die:0x8180ed6)
Signed-off-by: Namhyung Kim <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Athira Rajeev <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
In check_matching_type(), it'd be easier to display the typename in
question if it's available.
For example, check out the line starts with 'chk'.
-----------------------------------------------------------
find data type for 0x10(reg0) at cpuacct_charge+0x13
CU for kernel/sched/build_utility.c (die:0x137ee0b)
frame base: cfa=1 fbreg=7
scope: [3/3] (die:13d9632)
bb: [c - 13]
var [c] reg5 type='struct task_struct*' size=0x8 (die:0x1381230)
mov [c] 0xdf8(reg5) -> reg0 type='struct css_set*' size=0x8 (die:0x1385c56)
chk [13] reg0 offset=0x10 ok=1 kind=1 (struct css_set*) : Good! <<<--- here
found by insn track: 0x10(reg0) type-offset=0x10
final result: type='struct css_set' size=0x250 (die:0x1385b0e)
Another example:
-----------------------------------------------------------
find data type for 0x8(reg0) at menu_select+0x279
CU for drivers/cpuidle/governors/menu.c (die:0x7b0fe79)
frame base: cfa=1 fbreg=7
scope: [2/2] (die:7b11010)
bb: [273 - 277]
bb: [279 - 279]
chk [279] reg0 offset=0x8 ok=0 kind=0 cfa : no type information
scope: [1/2] (die:7b10cbc)
bb: [0 - 64]
...
mov [26a] imm=0xffffffff -> reg15
bb: [273 - 277]
bb: [279 - 279]
chk [279] reg0 offset=0x8 ok=1 kind=1 (long long unsigned int) : no/void pointer <<<--- here
final result: no/void pointer
Also change some places to print negative offsets properly.
Before:
-----------------------------------------------------------
find data type for 0xffffff40(reg6) at __tcp_transmit_skb+0x58
After:
-----------------------------------------------------------
find data type for -0xc0(reg6) at __tcp_transmit_skb+0x58
Signed-off-by: Namhyung Kim <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Athira Rajeev <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The __die_find_member_offset_cb() missed to handle bitfield members
which don't have DW_AT_data_member_location. Like in adding member
types in __add_member_cb() it should fallback to check the bit offset
when it resolves the member type for an offset.
Fixes: 437683a9941891c1 ("perf dwarf-aux: Handle type transfer for memory access")
Signed-off-by: Namhyung Kim <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Athira Rajeev <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Masami Hiramatsu <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Sometimes it's useful to organize member fields in cache-line boundary.
The 'typecln' sort key is short for type-cacheline and to show samples
in each cacheline. The cacheline size is fixed to 64 for now, but it
can read the actual size once it saves the value from sysfs.
For example, you maybe want to which cacheline in a target is hot or
cold. The following shows members in the cfs_rq's first cache line.
$ perf report -s type,typecln,typeoff -H
...
- 2.67% struct cfs_rq
+ 1.23% struct cfs_rq: cache-line 2
+ 0.57% struct cfs_rq: cache-line 4
+ 0.46% struct cfs_rq: cache-line 6
- 0.41% struct cfs_rq: cache-line 0
0.39% struct cfs_rq +0x14 (h_nr_running)
0.02% struct cfs_rq +0x38 (tasks_timeline.rb_leftmost)
...
Committer testing:
# root@number:~# perf report -s type,typecln,typeoff -H --stdio
# Total Lost Samples: 0
#
# Samples: 5K of event 'cpu_atom/mem-loads,ldlat=5/P'
# Event count (approx.): 312251
#
# Overhead Data Type / Data Type Cacheline / Data Type Offset
# .............. ..................................................
#
<SNIP>
0.07% struct sigaction
0.05% struct sigaction: cache-line 1
0.02% struct sigaction +0x58 (sa_mask)
0.02% struct sigaction +0x78 (sa_mask)
0.03% struct sigaction: cache-line 0
0.02% struct sigaction +0x38 (sa_mask)
0.01% struct sigaction +0x8 (sa_mask)
<SNIP>
Signed-off-by: Namhyung Kim <[email protected]>
Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Athira Rajeev <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
It'd be better to have them in hex to check cacheline alignment.
Percent offset size field
100.00 0 0x1c0 struct cfs_rq {
0.00 0 0x10 struct load_weight load {
0.00 0 0x8 long unsigned int weight;
0.00 0x8 0x4 u32 inv_weight;
};
0.00 0x10 0x4 unsigned int nr_running;
14.56 0x14 0x4 unsigned int h_nr_running;
0.00 0x18 0x4 unsigned int idle_nr_running;
0.00 0x1c 0x4 unsigned int idle_h_nr_running;
...
Committer notes:
Justification from Namhyung when asked about why it would be "better":
Cache line sizes are power of 2 so it'd be natural to use hex and
check whether an offset is in the same boundary. Also 'perf annotate'
shows instruction offsets in hex.
>
> Maybe this should be selectable?
I can add an option and/or a config if you want.
Signed-off-by: Namhyung Kim <[email protected]>
Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Athira Rajeev <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The check that map is NULL is already done in the bpf_map__fd(map) and
returns an errno, which does not run further checks.
In addition, even if the check for map is run, the return is a pointer,
which is not consistent with the err_number returned by bpf_map__fd(map).
Signed-off-by: Yang Ruibin <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephen Rothwell <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
In check_matching_type(), it checks the type state of the register in a
wrong order. When it's the percpu pointer, it should check the type for
the pointer, but it checks the CFA bit first and thought it has no type
in the stack slot. This resulted in no type info.
-----------------------------------------------------------
find data type for 0x28(reg1) at hrtimer_reprogram+0x88
CU for kernel/time/hrtimer.c (die:0x18f219f)
frame base: cfa=1 fbreg=7
...
add [72] percpu 0x24500 -> reg1 pointer type='struct hrtimer_cpu_base' size=0x240 (die:0x18f6d46)
bb: [7a - 7e]
bb: [80 - 86] (here)
bb: [88 - 88] vvv
chk [88] reg1 offset=0x28 ok=1 kind=4 cfa : no type information
no type information
Here, instruction at 0x72 found reg1 has a (percpu) pointer and got the
correct type. But when it checks the final result, it wrongly thought
it was stack variable because it checks the cfa bit first.
After changing the order of state check:
-----------------------------------------------------------
find data type for 0x28(reg1) at hrtimer_reprogram+0x88
CU for kernel/time/hrtimer.c (die:0x18f219f)
frame base: cfa=1 fbreg=7
... (here)
vvvvvvvvvv
chk [88] reg1 offset=0x28 ok=1 kind=4 percpu ptr : Good!
found by insn track: 0x28(reg1) type-offset=0x28
final type: type='struct hrtimer_cpu_base' size=0x240 (die:0x18f6d46)
Signed-off-by: Namhyung Kim <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Athira Rajeev <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Sometimes a compound type can have a single field and the size is the
same as the base type. But it's still preferred as struct or union
could carry more information than the base type.
Also put a slight priority on the typedef for the same reason.
Signed-off-by: Namhyung Kim <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Athira Rajeev <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
I found it missed to copy the immediate constant when it moves the
register value. This could result in a wrong type inference since the
address for the per-cpu variable would be 0 always.
Fixes: eb9190afaed6afd5 ("perf annotate-data: Handle ADD instructions")
Signed-off-by: Namhyung Kim <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Athira Rajeev <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Remove dependence on libcap. libcap is only used to query whether a
capability is supported, which is just 1 capget system call.
If the capget system call fails, fall back on root permission
checking. Previously if libcap fails then the permission is assumed
not present which may be pessimistic/wrong.
Add a used_root out argument to perf_cap__capable to say whether the
fall back root check was used. This allows the correct error message,
"root" vs "users with the CAP_PERFMON or CAP_SYS_ADMIN capability", to
be selected.
Tidy uses of perf_cap__capable so that tests aren't repeated if capget
isn't supported.
Signed-off-by: Ian Rogers <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Athira Rajeev <[email protected]>
Cc: Changbin Du <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: James Clark <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Oliver Upton <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The bitfield members might not have DW_AT_data_member_location. Let's
use DW_AT_data_bit_offset to set the member offset correct. Also use
DW_AT_bit_size for the name like in a C program.
Before:
Annotate type: 'struct sk_buff' (1 samples)
Percent Offset Size Field
- 100.00 0 232 struct sk_buff {
+ 0.00 0 24 union ;
+ 0.00 24 8 union ;
+ 0.00 32 8 union ;
0.00 40 48 char[] cb;
+ 0.00 88 16 union ;
0.00 104 8 long unsigned int _nfct;
100.00 112 4 unsigned int len;
0.00 116 4 unsigned int data_len;
0.00 120 2 __u16 mac_len;
0.00 122 2 __u16 hdr_len;
0.00 124 2 __u16 queue_mapping;
0.00 126 0 __u8[] __cloned_offset;
0.00 0 1 __u8 cloned;
0.00 0 1 __u8 nohdr;
0.00 0 1 __u8 fclone;
0.00 0 1 __u8 peeked;
0.00 0 1 __u8 head_frag;
0.00 0 1 __u8 pfmemalloc;
0.00 0 1 __u8 pp_recycle;
0.00 127 1 __u8 active_extensions;
+ 0.00 128 60 union ;
0.00 188 4 sk_buff_data_t tail;
0.00 192 4 sk_buff_data_t end;
0.00 200 8 unsigned char* head;
After:
Annotate type: 'struct sk_buff' (1 samples)
Percent Offset Size Field
- 100.00 0 232 struct sk_buff {
+ 0.00 0 24 union ;
+ 0.00 24 8 union ;
+ 0.00 32 8 union ;
0.00 40 48 char[] cb
+ 0.00 88 16 union ;
0.00 104 8 long unsigned int _nfct;
100.00 112 4 unsigned int len;
0.00 116 4 unsigned int data_len;
0.00 120 2 __u16 mac_len;
0.00 122 2 __u16 hdr_len;
0.00 124 2 __u16 queue_mapping;
0.00 126 0 __u8[] __cloned_offset;
0.00 126 1 __u8 cloned:1;
0.00 126 1 __u8 nohdr:1;
0.00 126 1 __u8 fclone:2;
0.00 126 1 __u8 peeked:1;
0.00 126 1 __u8 head_frag:1;
0.00 126 1 __u8 pfmemalloc:1;
0.00 126 1 __u8 pp_recycle:1;
0.00 127 1 __u8 active_extensions;
+ 0.00 128 60 union ;
0.00 188 4 sk_buff_data_t tail;
0.00 192 4 sk_buff_data_t end;
0.00 200 8 unsigned char* head;
Commiter notes:
Collect some data:
root@number:~# perf mem record -a --ldlat 5 -- ping -s 8193 -f 192.168.86.1
Memory events are enabled on a subset of CPUs: 16-27
PING 192.168.86.1 (192.168.86.1) 8193(8221) bytes of data.
.^C
--- 192.168.86.1 ping statistics ---
13881 packets transmitted, 13880 received, 0.00720409% packet loss, time 8664ms
rtt min/avg/max/mdev = 0.510/0.599/7.768/0.115 ms, ipg/ewma 0.624/0.593 ms
[ perf record: Woken up 8 times to write data ]
[ perf record: Captured and wrote 14.877 MB perf.data (46785 samples) ]
root@number:~#
root@number:~# perf evlist
cpu_atom/mem-loads,ldlat=5/P
cpu_atom/mem-stores/P
dummy:u
root@number:~# perf evlist -v
cpu_atom/mem-loads,ldlat=5/P: type: 10 (cpu_atom), size: 136, config: 0x5d0 (mem-loads), { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|ADDR|CPU|PERIOD|IDENTIFIER|DATA_SRC|WEIGHT_STRUCT, read_format: ID|LOST, disabled: 1, inherit: 1, freq: 1, precise_ip: 3, sample_id_all: 1, { bp_addr, config1 }: 0x7
cpu_atom/mem-stores/P: type: 10 (cpu_atom), size: 136, config: 0x6d0 (mem-stores), { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|ADDR|CPU|PERIOD|IDENTIFIER|DATA_SRC|WEIGHT_STRUCT, read_format: ID|LOST, disabled: 1, inherit: 1, freq: 1, precise_ip: 3, sample_id_all: 1
dummy:u: type: 1 (software), size: 136, config: 0x9 (PERF_COUNT_SW_DUMMY), { sample_period, sample_freq }: 1, sample_type: IP|TID|TIME|ADDR|CPU|IDENTIFIER|DATA_SRC|WEIGHT_STRUCT, read_format: ID|LOST, inherit: 1, exclude_kernel: 1, exclude_hv: 1, mmap: 1, comm: 1, task: 1, mmap_data: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1, ksymbol: 1, bpf_event: 1
root@number:~#
Ok, now lets see what changes from before this patch to after it:
root@number:~# perf annotate --data-type > /tmp/before
Apply the patch, build:
root@number:~# perf annotate --data-type > /tmp/after
The first hunk of the diff, for a glib data structure, in userspace,
look at those bitfields:
root@number:~# diff -u10 /tmp/before /tmp/after | head -20
--- /tmp/before 2024-08-20 17:29:58.306765780 -0300
+++ /tmp/after 2024-08-20 17:33:13.210582596 -0300
@@ -163,22 +163,22 @@
Annotate type: 'GHashTable' in /usr/lib64/libglib-2.0.so.0.8000.3 (1 samples):
============================================================================
Percent offset size field
100.00 0 96 GHashTable {
0.00 0 8 gsize size;
0.00 8 4 gint mod;
100.00 12 4 guint mask;
0.00 16 4 guint nnodes;
0.00 20 4 guint noccupied;
- 0.00 0 4 guint have_big_keys;
- 0.00 0 4 guint have_big_values;
+ 0.00 24 1 guint have_big_keys:1;
+ 0.00 24 1 guint have_big_values:1;
0.00 32 8 gpointer keys;
0.00 40 8 guint* hashes;
0.00 48 8 gpointer values;
root@number:~#
As advertised :-)
Signed-off-by: Namhyung Kim <[email protected]>
Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Athira Rajeev <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The previous attempt fixed the build on debian:experimental-x-mipsel,
but when building on a larger set of containers I noticed it broke the
build on some other 32-bit architectures such as:
42 7.87 ubuntu:18.04-x-arm : FAIL gcc version 7.5.0 (Ubuntu/Linaro 7.5.0-3ubuntu1~18.04)
builtin-daemon.c: In function 'cmd_session_list':
builtin-daemon.c:692:16: error: format '%llu' expects argument of type 'long long unsigned int', but argument 4 has type 'long int' [-Werror=format=]
fprintf(out, "%c%" PRIu64,
^~~~~
builtin-daemon.c:694:13:
csv_sep, (curr - daemon->start) / 60);
~~~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from builtin-daemon.c:3:0:
/usr/arm-linux-gnueabihf/include/inttypes.h:105:34: note: format string is defined here
# define PRIu64 __PRI64_PREFIX "u"
So lets cast that time_t (32-bit/64-bit) to uint64_t to make sure it
builds everywhere.
Fixes: 4bbe6002931954bb ("perf daemon: Fix the build on 32-bit architectures")
Cc: Adrian Hunter <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Namhyung Kim <[email protected]>
Link: https://lore.kernel.org/lkml/ZsPmldtJ0D9Cua9_@x1
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Add it to the record.sh shell test to verify if it tracks cgroup
information correctly. It records with --all-cgroups option can check
if it has PERF_RECORD_CGROUP and the names are not "unknown".
$ sudo ./perf test -vv 95
95: perf record tests:
--- start ---
test child forked, pid 2871922
169c90-169cd0 g test_loop
perf does have symbol 'test_loop'
Basic --per-thread mode test
Basic --per-thread mode test [Success]
Register capture test
Register capture test [Success]
Basic --system-wide mode test
Basic --system-wide mode test [Success]
Basic target workload test
Basic target workload test [Success]
Branch counter test
branch counter feature not supported on all core PMUs (/sys/bus/event_source/devices/cpu) [Skipped]
Cgroup sampling test
Cgroup sampling test [Success]
---- end(0) ----
95: perf record tests : Ok
Reviewed-by: Ian Rogers <[email protected]>
Signed-off-by: Namhyung Kim <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The recent change in 'struct perf_tool' constification broke the cgroup
and/or namespace tracking by resetting tool fields. It should set the
values after perf_tool__init().
Fixes: cecb1cf154b301c6 ("perf record: Use perf_tool__init()")
Reviewed-by: Ian Rogers <[email protected]>
Signed-off-by: Namhyung Kim <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The handling of mmap and mmap2 events is near identical. Add a common
helper function and call that by the two event handling functions.
Signed-off-by: Ian Rogers <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Anne Macedo <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Cc: Athira Rajeev <[email protected]>
Cc: Casey Chen <[email protected]>
Cc: Chaitanya S Prakash <[email protected]>
Cc: Colin Ian King <[email protected]>
Cc: Dominique Martinet <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: James Clark <[email protected]>
Cc: Jann Horn <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Masahiro Yamada <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Sun Haiyong <[email protected]>
Cc: Weilin Wang <[email protected]>
Cc: Yang Jihong <[email protected]>
Cc: Yunseong Kim <[email protected]>
Cc: Ze Gao <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
There are repipe, build ID and JIT dump variants of the mmap and mmap2
repipe functions. The organization doesn't allow JIT dump to work with
build ID injection and the structure is less than clear. Combine the
function and enable the different behaviors based on ifs.
Signed-off-by: Ian Rogers <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Anne Macedo <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Cc: Athira Rajeev <[email protected]>
Cc: Casey Chen <[email protected]>
Cc: Chaitanya S Prakash <[email protected]>
Cc: Colin Ian King <[email protected]>
Cc: Dominique Martinet <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: James Clark <[email protected]>
Cc: Jann Horn <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Masahiro Yamada <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Sun Haiyong <[email protected]>
Cc: Weilin Wang <[email protected]>
Cc: Yang Jihong <[email protected]>
Cc: Yunseong Kim <[email protected]>
Cc: Ze Gao <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
It is clearer to have a single enum that determines how build ids are
injected, it also allows for future extension.
Set the header build ID feature whether lazy or all are generated,
previously only the lazy case would set it.
Allow parsing of known build IDs for either the lazy or all cases.
Signed-off-by: Ian Rogers <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Anne Macedo <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Cc: Athira Rajeev <[email protected]>
Cc: Casey Chen <[email protected]>
Cc: Chaitanya S Prakash <[email protected]>
Cc: Colin Ian King <[email protected]>
Cc: Dominique Martinet <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: James Clark <[email protected]>
Cc: Jann Horn <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Masahiro Yamada <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Sun Haiyong <[email protected]>
Cc: Weilin Wang <[email protected]>
Cc: Yang Jihong <[email protected]>
Cc: Yunseong Kim <[email protected]>
Cc: Ze Gao <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Test recording of call-graphs and injecting --build-all. Add/expand
trap handler.
Signed-off-by: Ian Rogers <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Anne Macedo <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Cc: Athira Rajeev <[email protected]>
Cc: Casey Chen <[email protected]>
Cc: Chaitanya S Prakash <[email protected]>
Cc: Colin Ian King <[email protected]>
Cc: Dominique Martinet <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: James Clark <[email protected]>
Cc: Jann Horn <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Masahiro Yamada <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Sun Haiyong <[email protected]>
Cc: Weilin Wang <[email protected]>
Cc: Yang Jihong <[email protected]>
Cc: Yunseong Kim <[email protected]>
Cc: Ze Gao <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Allows evsel__id_hdr_size() to be used when the evsel is const.
Signed-off-by: Ian Rogers <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Anne Macedo <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Cc: Athira Rajeev <[email protected]>
Cc: Casey Chen <[email protected]>
Cc: Chaitanya S Prakash <[email protected]>
Cc: Colin Ian King <[email protected]>
Cc: Dominique Martinet <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: James Clark <[email protected]>
Cc: Jann Horn <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Masahiro Yamada <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Sun Haiyong <[email protected]>
Cc: Weilin Wang <[email protected]>
Cc: Yang Jihong <[email protected]>
Cc: Yunseong Kim <[email protected]>
Cc: Ze Gao <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The passed dso_id is copied and so is never an out argument. Remove
its mutability.
Signed-off-by: Ian Rogers <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Anne Macedo <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Cc: Athira Rajeev <[email protected]>
Cc: Casey Chen <[email protected]>
Cc: Chaitanya S Prakash <[email protected]>
Cc: Colin Ian King <[email protected]>
Cc: Dominique Martinet <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: James Clark <[email protected]>
Cc: Jann Horn <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Masahiro Yamada <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Sun Haiyong <[email protected]>
Cc: Weilin Wang <[email protected]>
Cc: Yang Jihong <[email protected]>
Cc: Yunseong Kim <[email protected]>
Cc: Ze Gao <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Make it clearer the argument is just being used as a string.
Signed-off-by: Ian Rogers <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Anne Macedo <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Cc: Athira Rajeev <[email protected]>
Cc: Casey Chen <[email protected]>
Cc: Chaitanya S Prakash <[email protected]>
Cc: Colin Ian King <[email protected]>
Cc: Dominique Martinet <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: James Clark <[email protected]>
Cc: Jann Horn <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Masahiro Yamada <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Sun Haiyong <[email protected]>
Cc: Weilin Wang <[email protected]>
Cc: Yang Jihong <[email protected]>
Cc: Yunseong Kim <[email protected]>
Cc: Ze Gao <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
map__init() is only used internally so make it static. Assume memory is
zero initialized, which will better support adding fields to struct
map in the future and was already the case for map__new2.
To reduce complexity, change set_priv and set_erange_warned to not take
a value to assign as they always assign true.
Signed-off-by: Ian Rogers <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Anne Macedo <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Cc: Athira Rajeev <[email protected]>
Cc: Casey Chen <[email protected]>
Cc: Chaitanya S Prakash <[email protected]>
Cc: Colin Ian King <[email protected]>
Cc: Dominique Martinet <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: James Clark <[email protected]>
Cc: Jann Horn <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Masahiro Yamada <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Sun Haiyong <[email protected]>
Cc: Weilin Wang <[email protected]>
Cc: Yang Jihong <[email protected]>
Cc: Yunseong Kim <[email protected]>
Cc: Ze Gao <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Make sure the memset of a synthesized event only zeros the necessary
tracing data part of the event, as a full event can be over 4kb in
size.
Signed-off-by: Ian Rogers <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Anne Macedo <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Cc: Athira Rajeev <[email protected]>
Cc: Casey Chen <[email protected]>
Cc: Chaitanya S Prakash <[email protected]>
Cc: Colin Ian King <[email protected]>
Cc: Dominique Martinet <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: James Clark <[email protected]>
Cc: Jann Horn <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Masahiro Yamada <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Sun Haiyong <[email protected]>
Cc: Weilin Wang <[email protected]>
Cc: Yang Jihong <[email protected]>
Cc: Yunseong Kim <[email protected]>
Cc: Ze Gao <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The 32-bit arm build system will complain:
tools/perf/util/python.c:75:28: error: field ‘sample’ has incomplete type
75 | struct perf_sample sample;
However, arm64 build system doesn't complain this.
The root cause is arm64 define "HAVE_KVM_STAT_SUPPORT := 1" in
tools/perf/arch/arm64/Makefile, but arm arch doesn't define this. This
will lead to kvm-stat.h include other header files on arm64 build
system, especially "util/sample.h" for util/python.c.
This will try to directly include "util/sample.h" for "util/python.c" to
avoid such build issue on arm platform.
Signed-off-by: Xu Yang <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
After trying all possibilities with DWARF and instruction tracking.
Signed-off-by: Namhyung Kim <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Athira Rajeev <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Sometimes it matches a variable in the inner scope but it fails because
the actual access can be on a different type. Let's try variables in
every scope and choose the best one using is_better_type().
I have an example with update_blocked_averages(), at first it found a
variable (__mptr) but it's a void pointer. So it moved on to the upper
scope and found another variable (cfs_rq).
$ perf --debug type-profile annotate --data-type --stdio
...
-----------------------------------------------------------
find data type for 0x140(reg14) at update_blocked_averages+0x2db
CU for kernel/sched/fair.c (die:0x12dd892)
frame base: cfa=1 fbreg=7
found "__mptr" (die: 0x13022f1) in scope=4/4 (die: 0x13022e8) failed: no/void pointer
variable location: base=reg14, offset=0x140
type='void*' size=0x8 (die:0x12dd8f9)
found "cfs_rq" (die: 0x1301721) in scope=3/4 (die: 0x130171c) type_offset=0x140
variable location: reg14
type='struct cfs_rq' size=0x1c0 (die:0x12e37e5)
final type: type='struct cfs_rq' size=0x1c0 (die:0x12e37e5)
IIUC the scope is like below:
1: update_blocked_averages
2: __update_blocked_fair
3: for_each_leaf_cfs_rq_safe
4: list_entry -> (container_of)
The container_of is implemented like:
#define container_of(ptr, type, member) ({ \
void *__mptr = (void *)(ptr); \
static_assert(__same_type(*(ptr), ((type *)0)->member) || \
__same_type(*(ptr), void), \
"pointer type mismatch in container_of()"); \
((type *)(__mptr - offsetof(type, member))); })
That's why we see the __mptr variable first but it failed since it has
no type information.
Then for_each_leaf_cfs_rq_safe() is defined as
#define for_each_leaf_cfs_rq_safe(rq, cfs_rq, pos) \
list_for_each_entry_safe(cfs_rq, pos, &rq->leaf_cfs_rq_list, \
leaf_cfs_rq_list)
Note that the access was 0x140(r14). And the cfs_rq has
leaf_cfs_rq_list at the 0x140. So it converts the list_head pointer to
a pointer to struct cfs_rq here.
$ pahole --hex -C cfs_rq vmlinux | grep 140
struct cfs_rq struct list_head leaf_cfs_rq_list; /* 0x140 0x10 */
Signed-off-by: Namhyung Kim <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Athira Rajeev <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|