| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
In tests/pmu.c, make a common utility that creates a PMU in a mkdtemp
directory and uses regular PMU parsing logic to load that PMU. Formats
must still be eagerly loaded as by default the PMU code assumes devices
are going to be in sysfs.
In util/pmu.[ch], hide perf_pmu__format_parse but add the eager argument
to perf_pmu__lookup called by perf_pmus__add_test_pmu. Later patches
will eagerly load other non-sysfs files when eager loading is enabled.
In tests/pmu.c, rather than manually constructing a list of term
arguments, just use the term parsing code from a string.
Add more comments and debug logging.
Reviewed-by: Kan Liang <[email protected]>
Signed-off-by: Ian Rogers <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Bjorn Helgaas <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: James Clark <[email protected]>
Cc: Jing Zhang <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Jonathan Corbet <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Randy Dunlap <[email protected]>
Cc: Ravi Bangoria <[email protected]>
Cc: Thomas Richter <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Add JSON to the test name.
Reviewed-by: Kan Liang <[email protected]>
Signed-off-by: Ian Rogers <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Bjorn Helgaas <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: James Clark <[email protected]>
Cc: Jing Zhang <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Jonathan Corbet <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Randy Dunlap <[email protected]>
Cc: Ravi Bangoria <[email protected]>
Cc: Thomas Richter <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
I found that the debug build was a slowed down a lot by the maps lock
code since it checks the invariants whenever it gets the pointer to the
lock. This means it checks twice the invariants before and after the
access.
Instead, let's move the checking code within the lock area but after any
modification and remove it from the read paths. This would remove (more
than) half of the maps lock overhead.
The time for perf report with a huge data file (200k+ of MMAP2 events).
Non-debug Before After
--------- -------- --------
2m 43s 6m 45s 4m 21s
Reviewed-by: Ian Rogers <[email protected]>
Signed-off-by: Namhyung Kim <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Cross-merge networking fixes after downstream PR.
Conflicts:
include/linux/filter.h
kernel/bpf/core.c
66e13b615a0c ("bpf: verifier: prevent userspace memory access")
d503a04f8bc0 ("bpf: Add support for certain atomics in bpf_arena to x86 JIT")
https://lore.kernel.org/all/[email protected]/
No adjacent changes.
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
When the config validation functions are warning about ETMv3, they do it
based on "not ETMv4". If the drivers aren't all loaded or the hardware
doesn't support Coresight it will appear as "not ETMv4" and then Perf
will print the error message "... not supported in ETMv3 ..." which is
wrong and confusing.
cs_etm_is_etmv4() is also misnamed because it also returns true for
ETE because ETE has a superset of the ETMv4 metadata files. Although
this was always done in the correct order so it wasn't a bug.
Improve all this by making a single get version function which also
handles not present as a separate case. Change the ETMv3 error message
to only print when ETMv3 is detected, and add a new error message for
the not present case.
Reviewed-by: Ian Rogers <[email protected]>
Reviewed-by: Leo Yan <[email protected]>
Signed-off-by: James Clark <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: John Garry <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Mike Leach <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Suzuki Poulouse <[email protected]>
Cc: Will Deacon <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Most functions already have cs_etm_pmu, so it's a bit neater to pass
it through rather than itr only to convert it again.
Signed-off-by: James Clark <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: John Garry <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Mike Leach <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Suzuki Poulouse <[email protected]>
Cc: Will Deacon <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The perf_cpu struct makes some iterators simpler and avoids some
mistakes with interchanging CPU IDs with indexes etc. At the moment in
this file the conversion to an integer is done somewhere in the middle
of the call tree. Change it to delay the conversion to an int until the
leaf functions.
Some of the usage patterns are duplicated, so instead of changing them
all, make cs_etm_get_ro() more reusable and use that everywhere.
cs_etm_get_ro() didn't return an error before, but return one now so
that it can also be used where an error is needed. Continue to ignore
the error where it was already ignored.
Use cs_etm_pmu_path_exists() instead of cs_etm_get_ro() in
cs_etm_is_etmv4() because cs_etm_get_ro() prints a warning, but path
exists is sufficient for this use case.
Signed-off-by: James Clark <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: John Garry <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Mike Leach <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Suzuki Poulouse <[email protected]>
Cc: Will Deacon <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
I sometimes see ("unknown type") in the result and it was because it
didn't check the type of stack variables properly during the instruction
tracking. The stack can carry constant values (without type info) and
if the target instruction is accessing the stack location, it resulted
in the "unknown type".
Maybe we could pick one of integer types for the constant, but it
doesn't really mean anything useful. Let's just drop the stack slot if
it doesn't have a valid type info.
Here's an example how it got the unknown type.
Note that 0xffffff48 = -0xb8.
-----------------------------------------------------------
find data type for 0xffffff48(reg6) at ...
CU for ...
frame base: cfa=0 fbreg=6
scope: [2/2] (die:11cb97f)
bb: [37 - 3a]
var [37] reg15 type='int' size=0x4 (die:0x1180633)
bb: [40 - 4b]
mov [40] imm=0x1 -> reg13
var [45] reg8 type='sigset_t*' size=0x8 (die:0x11a39ee)
mov [45] imm=0x1 -> reg2 <--- here reg2 has a constant
bb: [215 - 237]
mov [218] reg2 -> -0xb8(stack) constant <--- and save it to the stack
mov [225] reg13 -> -0xc4(stack) constant
call [22f] find_task_by_vgpid
call [22f] return -> reg0 type='struct task_struct*' size=0x8 (die:0x11881e8)
bb: [5c8 - 5cf]
bb: [2fb - 302]
mov [2fb] -0xc4(stack) -> reg13 constant
bb: [13b - 14d]
mov [143] 0xd50(reg3) -> reg5 type='struct task_struct*' size=0x8 (die:0xa31f3c)
bb: [153 - 153]
chk [153] reg6 offset=0xffffff48 ok=0 kind=0 fbreg <--- access here
found by insn track: 0xffffff48(reg6) type-offset=0
type='G<EF>^K<F6><AF>U' size=0 (die:0xffffffffffffffff)
Signed-off-by: Namhyung Kim <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The instruction tracking should be the same for the both registers.
Just do it once and compare the result with multi regs as with the
previous patches.
Then we don't need to call find_data_type_block() separately for each
reg.
Let's remove the 'reg' argument from the relevant functions.
Signed-off-by: Namhyung Kim <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The following instruction pattern is used to access a global variable.
mov $0x231c0, %rax
movsql %edi, %rcx
mov -0x7dc94ae0(,%rcx,8), %rcx
cmpl $0x0, 0xa60(%rcx,%rax,1) <<<--- here
The first instruction set the address of the per-cpu variable (here, it
is 'runqueues' of type 'struct rq'). The second instruction seems like
a cpu number of the per-cpu base. The third instruction get the base
offset of per-cpu area for that cpu. The last instruction compares the
value of the per-cpu variable at the offset of 0xa60.
Signed-off-by: Namhyung Kim <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Like per-cpu base offset array, sometimes it accesses the global
variable directly using the offset. Allow this type of instructions as
long as it finds a global variable for the address.
movslq %edi, %rcx
mov -0x7dc94ae0(,%rcx,8), %rcx <<<--- here
As %rcx has a valid type (i.e. array index) from the first instruction,
it will be checked by the first case in check_matching_type(). But as
it's not a pointer type, the match will fail. But in this case, it
should check if it accesses the kernel global array variable.
Signed-off-by: Namhyung Kim <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Currently it looks up global variables from the current CU using address
and name. But it sometimes fails to find a variable as the variable can
come from a different CU - but it's still strange it failed to find a
declaration for some reason.
Anyway, it can collect all global variables from all CU once and then
lookup them later on. This slightly improves the success rate of my
test data set.
Signed-off-by: Namhyung Kim <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
This function is to search all global variables in the CU. We want to
have the list of global variables at once and match them later.
Signed-off-by: Namhyung Kim <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Masami Hiramatsu <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- A fix for TASK_SIZE on rv64/NOMMU, to reflect the lack of user/kernel
separation
- A fix to avoid loading rv64/NOMMU kernel past the start of RAM
- A fix for RISCV_HWPROBE_EXT_ZVFHMIN on ilp32 to avoid signed integer
overflow in the bitmask
- The sud_test kselftest has been fixed to properly swizzle the syscall
number into the return register, which are not the same on RISC-V
- A fix for a build warning in the perf tools on rv32
- A fix for the CBO selftests, to avoid non-constants leaking into the
inline asm
- A pair of fixes for T-Head PBMT errata probing, which has been
renamed MAE by the vendor
* tag 'riscv-for-linus-6.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
RISC-V: selftests: cbo: Ensure asm operands match constraints, take 2
perf riscv: Fix the warning due to the incompatible type
riscv: T-Head: Test availability bit before enabling MAE errata
riscv: thead: Rename T-Head PBMT to MAE
selftests: sud_test: return correct emulated syscall value on RISC-V
riscv: hwprobe: fix invalid sign extension for RISCV_HWPROBE_EXT_ZVFHMIN
riscv: Fix loading 64-bit NOMMU kernels past the start of RAM
riscv: Fix TASK_SIZE on 64-bit NOMMU
|
|
We can't default to doing parallel tests as there are tests that compete
for the same resources and thus clash, for instance tests that put in
place 'perf probe' probes, that clean the probes without regard to other
tests needs, ARM64 coresight tests, Intel PT ones, etc.
So reintroduce --p/--parallel and make -S/--sequential the default.
We need to come up with infrastructure that state which tests can't run
in parallel because they need exclusive access to some resource,
something as simple as "probes" that would then avoid 'perf probe' tests
from running while other such test is running, or make the tests more
resilient, till then we can't use parallel mode as default.
While at it, document all these options in the 'perf test' man page.
Reported-by: Adrian Hunter <[email protected]>
Reported-by: Arnaldo Carvalho de Melo <[email protected]>
Reported-by: James Clark <[email protected]>
Reviewed-by: Ian Rogers <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Namhyung Kim <[email protected]>
Link: https://lore.kernel.org/lkml/Ziwm18BqIn_vc1vn@x1
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
To pick up the changes in this cset:
3c7a8e190bc58081 ("uapi: introduce uapi-friendly macros for GENMASK")
That just causes perf to rebuild. Its just some macros going to an uapi
header that we now have to grab a copy into tools/ as well.
This addresses this perf build warning:
Warning: Kernel ABI header differences:
diff -u tools/include/linux/bits.h include/linux/bits.h
Cc: Adrian Hunter <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Paolo Bonzini <[email protected]>
Link: https://lore.kernel.org/lkml/ZiwJsFOBez0MS4r9@x1
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The loop in hists__find_annotations() never set the 'nd' pointer to NULL
and it makes stdio output repeating the last element forever. I think
it doesn't set to NULL for TUI to prevent it from exiting unexpectedly.
But it should just set on stdio mode.
Fixes: d001c7a7f4736743 ("perf annotate-data: Add hist_entry__annotate_data_tui()")
Signed-off-by: Namhyung Kim <[email protected]>
Acked-by: Ian Rogers <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Memory sanitizer lacks an interceptor for scandirat, reporting all
memory it allocates as uninitialized. Memory sanitizer has a scandir
interceptor so use the fallback function in this case. This allows
'perf test' to run under memory sanitizer.
Additional notes from Ian on running in this mode:
Note, as msan needs to instrument memory allocations libraries need to
be compiled with it. I lacked the msan built libraries and so built
with:
```
$ make -C tools/perf O=/tmp/perf DEBUG=1 EXTRA_CFLAGS="-O0 -g
-fno-omit-frame-pointer -fsanitize=memory
-fsanitize-memory-track-origins" CC=clang CXX=clang++ HOSTCC=clang
NO_LIBTRACEEVENT=1 NO_LIBELF=1 BUILD_BPF_SKEL=0 NO_LIBPFM=1
```
oh, I disabled libbpf here as the bpf system call also lacks msan interceptors.
Signed-off-by: Ian Rogers <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
MemorySanitizer discovered instances where the instruction op value was
not assigned.:
WARNING: MemorySanitizer: use-of-uninitialized-value
#0 0x5581c00a76b3 in intel_pt_sample_flags tools/perf/util/intel-pt.c:1527:17
Uninitialized value was stored to memory at
#0 0x5581c005ddf8 in intel_pt_walk_insn tools/perf/util/intel-pt-decoder/intel-pt-decoder.c:1256:25
The op value is used to set branch flags for branch instructions
encountered when walking the code, so fix by setting op to
INTEL_PT_OP_OTHER in other cases.
Fixes: 4c761d805bb2d2ea ("perf intel-pt: Fix intel_pt_fup_event() assumptions about setting state type")
Reported-by: Ian Rogers <[email protected]>
Signed-off-by: Adrian Hunter <[email protected]>
Tested-by: Ian Rogers <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Closes: https://lore.kernel.org/linux-perf-users/[email protected]/
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Fix comment misspellings
Signed-off-by: Howard Chu <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
dso__disassemble_filename() tries to get the filename for objdump (or
capstone) using build-id. But I found sometimes it didn't disassemble
some functions.
It turned out that those functions belong to a DSO which has no binary
type set. It seems it sets the binary type for some special files only
- like kernel (kallsyms or kcore) or BPF images. And there's a logic to
skip dso with DSO_BINARY_TYPE__NOT_FOUND.
As it's checked the build-id cache link, it should set the binary type
as DSO_BINARY_TYPE__BUILD_ID_CACHE.
Fixes: 873a83731f1cc85c ("perf annotate: Skip DSOs not found")
Signed-off-by: Namhyung Kim <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
I found some cases that capstone failed to disassemble. Probably my
capstone is an old version but anyway there's a chance it can fail. And
then it silently stopped in the middle. In my case, it didn't
understand "RDPKRU" instruction.
Let's check if the capstone disassemble reached the end of the function
and fallback to objdump if not.
Signed-off-by: Namhyung Kim <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
'perf report' TUI
As it removed the sample accounting for code when no symbol sort key is
given for 'perf report' TUI, it might not have allocated the
'struct annotated_source' yet. Let's check if it's NULL first.
Fixes: 6cdd977ec24e1538 ("perf report: Do not collect sample histogram unnecessarily")
Reviewed-by: Ian Rogers <[email protected]>
Signed-off-by: Namhyung Kim <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Add a basic 'perf annotate' test:
$ ./perf test annotate -vv
76: perf annotate basic tests:
--- start ---
test child forked, pid 846989
fbcd0-fbd55 l noploop
perf does have symbol 'noploop'
Basic perf annotate test
: 0 0xfbcd0 <noploop>:
0.00 : fbcd0: pushq %rbp
0.00 : fbcd1: movq %rsp, %rbp
0.00 : fbcd4: pushq %r12
0.00 : fbcd6: pushq %rbx
0.00 : fbcd7: movl $1, %ebx
0.00 : fbcdc: subq $0x10, %rsp
0.00 : fbce0: movq %fs:0x28, %rax
0.00 : fbce9: movq %rax, -0x18(%rbp)
0.00 : fbced: xorl %eax, %eax
0.00 : fbcef: testl %edi, %edi
0.00 : fbcf1: jle 0xfbd04
0.00 : fbcf3: movq (%rsi), %rdi
0.00 : fbcf6: movl $0xa, %edx
0.00 : fbcfb: xorl %esi, %esi
0.00 : fbcfd: callq 0x41920
0.00 : fbd02: movl %eax, %ebx
0.00 : fbd04: leaq -0x7b(%rip), %r12 # fbc90 <sighandler>
0.00 : fbd0b: movl $2, %edi
0.00 : fbd10: movq %r12, %rsi
0.00 : fbd13: callq 0x40a00
0.00 : fbd18: movl $0xe, %edi
0.00 : fbd1d: movq %r12, %rsi
0.00 : fbd20: callq 0x40a00
0.00 : fbd25: movl %ebx, %edi
0.00 : fbd27: callq 0x407c0
0.10 : fbd2c: movl 0x89785e(%rip), %eax # 993590 <done>
0.00 : fbd32: testl %eax, %eax
99.90 : fbd34: je 0xfbd2c
0.00 : fbd36: movq -0x18(%rbp), %rax
0.00 : fbd3a: subq %fs:0x28, %rax
0.00 : fbd43: jne 0xfbd50
0.00 : fbd45: addq $0x10, %rsp
0.00 : fbd49: xorl %eax, %eax
0.00 : fbd4b: popq %rbx
0.00 : fbd4c: popq %r12
0.00 : fbd4e: popq %rbp
0.00 : fbd4f: retq
0.00 : fbd50: callq 0x407e0
0.00 : fbcd0: pushq %rbp
0.00 : fbcd1: movq %rsp, %rbp
0.00 : fbcd4: pushq %r12
0.00 : fbcd0: push %rbp
0.00 : fbcd1: mov %rsp,%rbp
0.00 : fbcd4: push %r12
Basic annotate test [Success]
---- end(0) ----
76: perf annotate basic tests : Ok
Reviewed-by: Ian Rogers <[email protected]>
Signed-off-by: Namhyung Kim <[email protected]>
Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
[ Improved a bit the error messages ]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Add comments. Pass ownership of the event name to save on a strdup.
Signed-off-by: Ian Rogers <[email protected]>
Reviewed-by: Kan Liang <[email protected]>
Tested-by: Atish Patra <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Beeman Strong <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: James Clark <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Add comments. Ensure leader->group_name is freed before overwriting
it.
Signed-off-by: Ian Rogers <[email protected]>
Reviewed-by: Kan Liang <[email protected]>
Tested-by: Atish Patra <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Beeman Strong <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: James Clark <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Moves 352 bytes from .data to .data.rel.ro.
Signed-off-by: Ian Rogers <[email protected]>
Reviewed-by: Kan Liang <[email protected]>
Tested-by: Atish Patra <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Beeman Strong <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: James Clark <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Use a struct/bitmap rather than a copied string from lexer.
In lexer give improved error message when too many precise flags are
given or repeated modifiers.
Before:
$ perf stat -e 'cycles:kuk' true
event syntax error: 'cycles:kuk'
\___ Bad modifier
...
$ perf stat -e 'cycles:pppp' true
event syntax error: 'cycles:pppp'
\___ Bad modifier
...
$ perf stat -e '{instructions:p,cycles:pp}:pp' -a true
event syntax error: '..cycles:pp}:pp'
\___ Bad modifier
...
After:
$ perf stat -e 'cycles:kuk' true
event syntax error: 'cycles:kuk'
\___ Duplicate modifier 'k' (kernel)
...
$ perf stat -e 'cycles:pppp' true
event syntax error: 'cycles:pppp'
\___ Maximum precise value is 3
...
$ perf stat -e '{instructions:p,cycles:pp}:pp' true
event syntax error: '..cycles:pp}:pp'
\___ Maximum combined precise value is 3, adding precision to "cycles:pp"
...
Signed-off-by: Ian Rogers <[email protected]>
Reviewed-by: Kan Liang <[email protected]>
Tested-by: Atish Patra <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Beeman Strong <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: James Clark <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Inline parse_events_evlist_error that is only used in
parse_events_error. Modify parse_events_error to not report a parser
error unless errors haven't already been reported. Make it clearer
that the latter case only happens for unrecognized input.
Before:
$ perf stat -e 'cycles/period=99999999999999999999/' true
event syntax error: 'cycles/period=99999999999999999999/'
\___ parser error
event syntax error: '..les/period=99999999999999999999/'
\___ Bad base 10 number "99999999999999999999"
Run 'perf list' for a list of valid events
Usage: perf stat [<options>] [<command>]
-e, --event <event> event selector. use 'perf list' to list available events
$ perf stat -e 'cycles:xyz' true
event syntax error: 'cycles:xyz'
\___ parser error
Run 'perf list' for a list of valid events
Usage: perf stat [<options>] [<command>]
-e, --event <event> event selector. use 'perf list' to list available events
After:
$ perf stat -e 'cycles/period=99999999999999999999/xyz' true
event syntax error: '..les/period=99999999999999999999/xyz'
\___ Bad base 10 number "99999999999999999999"
Run 'perf list' for a list of valid events
Usage: perf stat [<options>] [<command>]
-e, --event <event> event selector. use 'perf list' to list available events
$ perf stat -e 'cycles:xyz' true
event syntax error: 'cycles:xyz'
\___ Unrecognized input
Run 'perf list' for a list of valid events
Usage: perf stat [<options>] [<command>]
-e, --event <event> event selector. use 'perf list' to list available events
Signed-off-by: Ian Rogers <[email protected]>
Reviewed-by: Kan Liang <[email protected]>
Tested-by: Atish Patra <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Beeman Strong <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: James Clark <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Use the error handler from the parse_state to give a more informative
error message.
Before:
$ perf stat -e 'cycles/period=99999999999999999999/' true
event syntax error: 'cycles/period=99999999999999999999/'
\___ parser error
Run 'perf list' for a list of valid events
Usage: perf stat [<options>] [<command>]
-e, --event <event> event selector. use 'perf list' to list available events
After:
$ perf stat -e 'cycles/period=99999999999999999999/' true
event syntax error: 'cycles/period=99999999999999999999/'
\___ parser error
event syntax error: '..les/period=99999999999999999999/'
\___ Bad base 10 number "99999999999999999999"
Run 'perf list' for a list of valid events
Usage: perf stat [<options>] [<command>]
-e, --event <event> event selector. use 'perf list' to list available events
Signed-off-by: Ian Rogers <[email protected]>
Reviewed-by: Kan Liang <[email protected]>
Tested-by: Atish Patra <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Beeman Strong <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: James Clark <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The helper function just wraps a splice and free. Making the free
inline removes a comment, so then it just wraps a splice which we can
make inline too.
Signed-off-by: Ian Rogers <[email protected]>
Reviewed-by: Kan Liang <[email protected]>
Tested-by: Atish Patra <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Beeman Strong <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: James Clark <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
It was requested that RISC-V be able to add events to the perf tool so
the PMU driver didn't need to map legacy events to config encodings:
https://lore.kernel.org/lkml/[email protected]/
This change makes the priority of events specified without a PMU the
same as those specified with a PMU, namely sysfs and JSON events are
checked first before using the legacy encoding.
The hw_term is made more generic as a hardware_event that encodes a
pair of string and int value, allowing parse_events_multi_pmu_add to
fall back on a known encoding when the sysfs/JSON adding fails for
core events. As this covers PE_VALUE_SYM_HW, that token is removed and
related code simplified.
Signed-off-by: Ian Rogers <[email protected]>
Reviewed-by: Kan Liang <[email protected]>
Tested-by: Atish Patra <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Beeman Strong <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: James Clark <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Allow the term list to be const so that other functions can pass const
term lists. Add const as necessary to called functions.
Signed-off-by: Ian Rogers <[email protected]>
Reviewed-by: Kan Liang <[email protected]>
Tested-by: Atish Patra <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Beeman Strong <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: James Clark <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Avoid duplicate logic for name_or_raw and PE_TERM_HW by having a rule
to turn PE_TERM_HW into a name_or_raw.
Signed-off-by: Ian Rogers <[email protected]>
Reviewed-by: Kan Liang <[email protected]>
Tested-by: Atish Patra <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Beeman Strong <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: James Clark <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Prior behavior is to not look for legacy cache names in sysfs/JSON and
to create events on all core PMUs. New behavior is to look for
sysfs/JSON events first on all PMUs, for core PMUs add a legacy event
if the sysfs/JSON event isn't present.
This is done so that there is consistency with how event names in
terms are handled and their prioritization of sysfs/JSON over
legacy. It may make sense to use a legacy cache event name as an event
name on a non-core PMU so we should allow it.
Signed-off-by: Ian Rogers <[email protected]>
Reviewed-by: Kan Liang <[email protected]>
Tested-by: Atish Patra <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Beeman Strong <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: James Clark <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Switch from "cache-references" to "branches" in test as Intel has a
sysfs event for "cache-references" and changing the priority for sysfs
over legacy causes the test to fail.
Signed-off-by: Ian Rogers <[email protected]>
Reviewed-by: Kan Liang <[email protected]>
Tested-by: Atish Patra <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Beeman Strong <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: James Clark <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Move all implementation to pmu code. Don't allocate a fnmatch wildcard
pattern, matching ignoring the suffix already handles this, and only
use fnmatch if the given PMU name has a '*' in it.
Signed-off-by: Ian Rogers <[email protected]>
Reviewed-by: Kan Liang <[email protected]>
Tested-by: Atish Patra <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Beeman Strong <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: James Clark <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
In parse_events_add_pmu, delay copying the list of terms until it is
known the list contains terms.
Signed-off-by: Ian Rogers <[email protected]>
Reviewed-by: Kan Liang <[email protected]>
Tested-by: Atish Patra <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Beeman Strong <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: James Clark <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Avoid passing the name of a PMU then finding it again, just directly
pass the PMU. parse_events_multi_pmu_add_or_add_pmu() is the only version
that needs to find a PMU, so move the find there. Remove the error
message as parse_events_multi_pmu_add_or_add_pmu will given an error at
the end when a name isn't either a PMU name or event name. Without the
error message being created the location in the input parameter (loc)
can be removed.
Signed-off-by: Ian Rogers <[email protected]>
Reviewed-by: Kan Liang <[email protected]>
Tested-by: Atish Patra <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Beeman Strong <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: James Clark <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Factor out the case of an event or PMU name followed by a slash based
term list. This is with a view to sharing the code with new legacy
hardware parsing. Use early return to reduce indentation in the code.
Make parse_events_add_pmu static now it doesn't need sharing with
parse-events.y.
Signed-off-by: Ian Rogers <[email protected]>
Reviewed-by: Kan Liang <[email protected]>
Tested-by: Atish Patra <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Beeman Strong <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: James Clark <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Add a Python script to run a perf script command multiple times in
parallel, using perf script options --cpu and --time so that each job
processes a different chunk of the data.
Extend perf script tests to test also the new script.
The script supports the use of normal 'perf script' options like
--dlfilter and --script, so that the benefit of running parallel jobs
naturally extends to them also. In addition, a command can be provided
(refer --pipe-to option) to pipe standard output to a custom command.
Refer to the script's own help text at the end of the patch for more
details.
The script is useful for Intel PT traces, that can be efficiently
decoded by 'perf script' when split by CPU and/or time ranges. Running
jobs in parallel can decrease the overall decoding time.
Committer testing:
Ian reported that shellcheck found some issues, I installed it as there
are no warnings about it not being available, but when available it
fails the build with:
TEST /tmp/build/perf-tools-next/tests/shell/script.sh.shellcheck_log
CC /tmp/build/perf-tools-next/util/header.o
In tests/shell/script.sh line 20:
rm -rf "${temp_dir}/"*
^-------------^ SC2115 (warning): Use "${var:?}" to ensure this never expands to /* .
In tests/shell/script.sh line 83:
output1_dir="${temp_dir}/output1"
^---------^ SC2034 (warning): output1_dir appears unused. Verify use (or export if used externally).
In tests/shell/script.sh line 84:
output2_dir="${temp_dir}/output2"
^---------^ SC2034 (warning): output2_dir appears unused. Verify use (or export if used externally).
In tests/shell/script.sh line 86:
python3 "${pp}" -o "${output_dir}" --jobs 4 --verbose -- perf script -i "${perf_data}"
^-----------^ SC2154 (warning): output_dir is referenced but not assigned (did you mean 'output1_dir'?).
For more information:
https://www.shellcheck.net/wiki/SC2034 -- output1_dir appears unused. Verif...
https://www.shellcheck.net/wiki/SC2115 -- Use "${var:?}" to ensure this nev...
https://www.shellcheck.net/wiki/SC2154 -- output_dir is referenced but not ...
Did these fixes:
- rm -rf "${temp_dir}/"*
+ rm -rf "${temp_dir:?}/"*
And:
@@ -83,8 +83,8 @@ test_parallel_perf()
output1_dir="${temp_dir}/output1"
output2_dir="${temp_dir}/output2"
perf record -o "${perf_data}" --sample-cpu uname
- python3 "${pp}" -o "${output_dir}" --jobs 4 --verbose -- perf script -i "${perf_data}"
- python3 "${pp}" -o "${output_dir}" --jobs 4 --verbose --per-cpu -- perf script -i "${perf_data}"
+ python3 "${pp}" -o "${output1_dir}" --jobs 4 --verbose -- perf script -i "${perf_data}"
+ python3 "${pp}" -o "${output2_dir}" --jobs 4 --verbose --per-cpu -- perf script -i "${perf_data}"
After that:
root@number:~# perf test -vv "perf script tests"
97: perf script tests:
--- start ---
test child forked, pid 4084139
DB test
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.032 MB /tmp/perf-test-script.T4MJDr0L6J/perf.data (7 samples) ]
<SNIP>
DB test [Success]
parallel-perf test
Linux
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.034 MB /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data (7 samples) ]
Starting: perf script --time=,91898.301878499 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
Starting: perf script --time=91898.301878500,91898.301905999 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
Starting: perf script --time=91898.301906000,91898.301933499 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
Starting: perf script --time=91898.301933500, -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
Finished: perf script --time=91898.301878500,91898.301905999 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
Finished: perf script --time=91898.301906000,91898.301933499 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
There are 4 jobs: 2 completed, 2 running
Finished: perf script --time=,91898.301878499 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
Finished: perf script --time=91898.301933500, -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
There are 4 jobs: 4 completed, 0 running
All jobs finished successfully
parallel-perf.py done
Starting: perf script --cpu=0 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
Starting: perf script --cpu=1 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
Starting: perf script --cpu=2 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
Starting: perf script --cpu=3 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
Finished: perf script --cpu=0 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
Finished: perf script --cpu=1 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
Finished: perf script --cpu=2 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
Finished: perf script --cpu=3 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
There are 28 jobs: 4 completed, 0 running
Starting: perf script --cpu=4 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
Starting: perf script --cpu=5 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
Starting: perf script --cpu=6 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
Starting: perf script --cpu=7 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
Finished: perf script --cpu=4 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
Finished: perf script --cpu=5 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
Finished: perf script --cpu=6 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
Finished: perf script --cpu=7 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
There are 28 jobs: 8 completed, 0 running
Starting: perf script --cpu=8 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
Starting: perf script --cpu=9 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
Starting: perf script --cpu=10 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
Starting: perf script --cpu=11 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
Finished: perf script --cpu=8 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
Finished: perf script --cpu=9 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
Finished: perf script --cpu=10 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
Finished: perf script --cpu=11 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
There are 28 jobs: 12 completed, 0 running
Starting: perf script --cpu=12 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
Starting: perf script --cpu=13 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
Starting: perf script --cpu=14 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
Starting: perf script --cpu=15 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
Finished: perf script --cpu=12 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
Finished: perf script --cpu=13 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
Finished: perf script --cpu=14 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
Finished: perf script --cpu=15 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
There are 28 jobs: 16 completed, 0 running
Starting: perf script --cpu=16 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
Starting: perf script --cpu=17 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
Starting: perf script --cpu=18 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
Starting: perf script --cpu=19 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
Finished: perf script --cpu=16 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
Finished: perf script --cpu=17 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
Finished: perf script --cpu=18 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
Finished: perf script --cpu=19 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
There are 28 jobs: 20 completed, 0 running
Starting: perf script --cpu=20 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
Starting: perf script --cpu=21 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
Starting: perf script --cpu=22 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
Starting: perf script --cpu=23 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
Finished: perf script --cpu=20 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
Finished: perf script --cpu=21 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
Finished: perf script --cpu=22 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
Finished: perf script --cpu=23 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
There are 28 jobs: 24 completed, 0 running
Starting: perf script --cpu=24 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
Starting: perf script --cpu=25 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
Starting: perf script --cpu=26 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
Starting: perf script --cpu=27 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
Finished: perf script --cpu=25 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
Finished: perf script --cpu=26 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
Finished: perf script --cpu=27 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
There are 28 jobs: 27 completed, 1 running
Finished: perf script --cpu=24 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
There are 28 jobs: 28 completed, 0 running
All jobs finished successfully
parallel-perf.py done
parallel-perf test [Success]
--- Cleaning up ---
---- end(0) ----
97: perf script tests : Ok
root@number:~#
Reviewed-by: Andi Kleen <[email protected]>
Signed-off-by: Adrian Hunter <[email protected]>
Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Before:
root@x1:~# perf test 76
76: SPDX-License-Identifier: GPL-2.0 : Ok
root@x1:~#
After:
root@x1:~# perf test 76
76: Add 'perf probe's, list and remove them. : Ok
root@x1:~#
Reviewed-by: Ian Rogers <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Athira Rajeev <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kajol Jain <[email protected]>
Cc: Michael Petlan <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Veronika Molnarova <[email protected]>
Link: https://lore.kernel.org/lkml/ZigRDKUGkcDqD-yW@x1
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
In the 32-bit platform, the second argument of getline is expectd to be
'size_t *'(aka 'unsigned int *'), but line_sz is of type
'unsigned long *'. Therefore, declare line_sz as size_t.
Signed-off-by: Ben Zong-You Xie <[email protected]>
Reviewed-by: Alexandre Ghiti <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Palmer Dabbelt <[email protected]>
|
|
Cross-merge networking fixes after downstream PR.
Conflicts:
drivers/net/ethernet/ti/icssg/icssg_prueth.c
net/mac80211/chan.c
89884459a0b9 ("wifi: mac80211: fix idle calculation with multi-link")
87f5500285fb ("wifi: mac80211: simplify ieee80211_assign_link_chanctx()")
https://lore.kernel.org/all/[email protected]/
net/unix/garbage.c
1971d13ffa84 ("af_unix: Suppress false-positive lockdep splat for spin_lock() in __unix_gc().")
4090fa373f0e ("af_unix: Replace garbage collection algorithm.")
drivers/net/ethernet/ti/icssg/icssg_prueth.c
drivers/net/ethernet/ti/icssg/icssg_common.c
4dcd0e83ea1d ("net: ti: icssg-prueth: Fix signedness bug in prueth_init_rx_chns()")
e2dc7bfd677f ("net: ti: icssg-prueth: Move common functions into a separate file")
No adjacent changes.
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
To get the changes in:
2855c2a7820bc819 ("vhost-vdpa: change ioctl # for VDPA_GET_VRING_SIZE")
1496c47065f9f841 ("vhost-vdpa: uapi to support reporting per vq size")
To pick up these changes and support them:
$ tools/perf/trace/beauty/vhost_virtio_ioctl.sh > before
$ cp include/uapi/linux/vhost.h tools/perf/trace/beauty/include/uapi/linux/vhost.h
$ tools/perf/trace/beauty/vhost_virtio_ioctl.sh > after
$ diff -u before after
--- before 2024-04-22 13:39:37.185674799 -0300
+++ after 2024-04-22 13:39:52.043344784 -0300
@@ -50,5 +50,6 @@
[0x7F] = "VDPA_GET_VRING_DESC_GROUP",
[0x80] = "VDPA_GET_VQS_COUNT",
[0x81] = "VDPA_GET_GROUP_NUM",
+ [0x82] = "VDPA_GET_VRING_SIZE",
[0x8] = "NEW_WORKER",
};
$
For instance, see how those 'cmd' ioctl arguments get translated, now
VDPA_GET_VRING_SIZE will be as well:
# perf trace -a -e ioctl --max-events=10
0.000 ( 0.011 ms): pipewire/2261 ioctl(fd: 60, cmd: SNDRV_PCM_HWSYNC, arg: 0x1) = 0
21.353 ( 0.014 ms): pipewire/2261 ioctl(fd: 60, cmd: SNDRV_PCM_HWSYNC, arg: 0x1) = 0
25.766 ( 0.014 ms): gnome-shell/2196 ioctl(fd: 14, cmd: DRM_I915_IRQ_WAIT, arg: 0x7ffe4a22c740) = 0
25.845 ( 0.034 ms): gnome-shel:cs0/2212 ioctl(fd: 14, cmd: DRM_I915_IRQ_EMIT, arg: 0x7fd43915dc70) = 0
25.916 ( 0.011 ms): gnome-shell/2196 ioctl(fd: 9, cmd: DRM_MODE_ADDFB2, arg: 0x7ffe4a22c8a0) = 0
25.941 ( 0.025 ms): gnome-shell/2196 ioctl(fd: 9, cmd: DRM_MODE_ATOMIC, arg: 0x7ffe4a22c840) = 0
32.915 ( 0.009 ms): gnome-shell/2196 ioctl(fd: 9, cmd: DRM_MODE_RMFB, arg: 0x7ffe4a22cf9c) = 0
42.522 ( 0.013 ms): gnome-shell/2196 ioctl(fd: 14, cmd: DRM_I915_IRQ_WAIT, arg: 0x7ffe4a22c740) = 0
42.579 ( 0.031 ms): gnome-shel:cs0/2212 ioctl(fd: 14, cmd: DRM_I915_IRQ_EMIT, arg: 0x7fd43915dc70) = 0
42.644 ( 0.010 ms): gnome-shell/2196 ioctl(fd: 9, cmd: DRM_MODE_ADDFB2, arg: 0x7ffe4a22c8a0) = 0
#
This addresses this perf tools build warning:
diff -u tools/perf/trace/beauty/include/uapi/linux/vhost.h include/uapi/linux/vhost.h
But this specific process, usually boring, this time around catch a
problem, namely the addition of VDPA_GET_VRING_SIZE used an ioctl number
already taken, which went on unnoticed and only got caught when the
tools/perf/trace/beauty/vhost_virtio_ioctl.sh script was run as part of
the perf tools process of updating the tools copies of system headers it
uses for creating id->string tables that, well, broke the perf tools
build because there were multiple initializations in the strings table
for the 0x80 entry...
I'm adding here a link to the discussion, that is lacking in the fix for
the reported problem, and a quote from one of the developers involved:
"Thanks a lot for taking care of this! So given the header is actually
buggy pls hang on to this change until I merge the fix for the header
(you were CC'd on the patch). It's great we have this redundancy which
allowed us to catch the bug in time, and many thanks to Namhyung Kim for
reporting the issue!"
This is here as a hint for anyone thinking about ways to automate
checking these issues in a more automated way... ;-)
Link: https://lore.kernel.org/lkml/ [email protected]
Cc: Adrian Hunter <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Michael S. Tsirkin <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Zhu Lingshan <[email protected]>
Link: https://lore.kernel.org/lkml/ZiaW-csEZLKK48BE@x1
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
To pick up fixes sent via perf-tools, by Namhyung Kim.
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
conditional defines"
This reverts commit a672af9139a843eb7a48fd7846bb6df8f81b5f86.
By now it is not used for building tools/perf, but Stephen Rothwell
reported that when building on a O= directory that had been built with
torvalds/master and this perf build command line:
$ make -C tools/perf -f Makefile.perf -s -O -j60 O=/home/sfr/next/perf NO_BPF_SKEL=1
If we then merge perf-tools-next, as he did for linux-next, then we end
up with a build failure for libbpf:
PERF_VERSION = 6.9.rc3.g42c4635c8dee
make[3]: *** No rule to make target '/home/sfr/next/next/tools/include/uapi/linux/stat.h', needed by '/home/sfr/next/perf/libbpf/staticobjs/libbpf.o'. Stop.
make[2]: *** [Makefile:157: /home/sfr/next/perf/libbpf/staticobjs/libbpf-in.o] Error 2
make[1]: *** [Makefile.perf:892: /home/sfr/next/perf/libbpf/libbpf.a] Error 2
make[1]: *** Waiting for unfinished jobs....
make: *** [Makefile.perf:264: sub-make] Error 2
This needs to be further investigated to figure out how to check if
libbpf really needs something that is in that
tools/include/uapi/linux/stat.h file and if not to remove that file in a
way that we don't break the build in any situation, to avoid requiring
doing a 'make clean'.
Reported-by: Stephen Rothwell <[email protected]>
Tested-by: Stephen Rothwell <[email protected]> # PowerPC le incermental build
Cc: Namhyung Kim <[email protected]>
Link: https://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
This is a common failure mode when probing userspace C++ code (where the
mangling adds significant length to the symbol names).
Prior to this patch, only a very generic error message is produced,
making the user guess at what the issue is.
Signed-off-by: Dima Kogan <[email protected]>
Acked-by: Masami Hiramatsu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
In several places we had
char buf[64];
...
snprintf(buf, 64, ...);
This patch changes it to
char buf[64];
...
snprintf(buf, sizeof(buf), ...);
so the "64" is only stated once.
Signed-off-by: Dima Kogan <[email protected]>
Acked-by: Masami Hiramatsu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Hardware counter and event information could be used to help creating event
groups that better utilize hardware counters and improve multiplexing.
Reviewed-by: Ian Rogers <[email protected]>
Signed-off-by: Weilin Wang <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Caleb Biggers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Perry Taylor <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Samantha Alt <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|