| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
In the default mode, the current output of the metricgroup include both
events and metrics, which is not necessary and just makes the output
hard to read. Since different ARCHs (even different generations in the
same ARCH) may use different events. The output also vary on different
platforms.
For a metricgroup, only outputting the value of each metric is good
enough.
Add a new field default_metricgroup in evsel to indicate an event of the
default metricgroup. For those events, printout() should print the
metricgroup name rather than each event.
Add perf_stat__skip_metric_event() to skip the evsel in the Default
metricgroup, if it's not running or not the metric event.
Add print_metricgroup_header_t to pass the functions which print the
display name of each metricgroup in the Default metricgroup. Support all
three output methods.
Factor out perf_stat__print_shadow_stats_metricgroup() to print out each
metrics.
On SPR:
Before:
./perf_old stat sleep 1
Performance counter stats for 'sleep 1':
0.54 msec task-clock:u # 0.001 CPUs utilized
0 context-switches:u # 0.000 /sec
0 cpu-migrations:u # 0.000 /sec
68 page-faults:u # 125.445 K/sec
540,970 cycles:u # 0.998 GHz
556,325 instructions:u # 1.03 insn per cycle
123,602 branches:u # 228.018 M/sec
6,889 branch-misses:u # 5.57% of all branches
3,245,820 TOPDOWN.SLOTS:u # 18.4 % tma_backend_bound
# 17.2 % tma_retiring
# 23.1 % tma_bad_speculation
# 41.4 % tma_frontend_bound
564,859 topdown-retiring:u
1,370,999 topdown-fe-bound:u
603,271 topdown-be-bound:u
744,874 topdown-bad-spec:u
12,661 INT_MISC.UOP_DROPPING:u # 23.357 M/sec
1.001798215 seconds time elapsed
0.000193000 seconds user
0.001700000 seconds sys
After:
$ ./perf stat sleep 1
Performance counter stats for 'sleep 1':
0.51 msec task-clock:u # 0.001 CPUs utilized
0 context-switches:u # 0.000 /sec
0 cpu-migrations:u # 0.000 /sec
68 page-faults:u # 132.683 K/sec
545,228 cycles:u # 1.064 GHz
555,509 instructions:u # 1.02 insn per cycle
123,574 branches:u # 241.120 M/sec
6,957 branch-misses:u # 5.63% of all branches
TopdownL1 # 17.5 % tma_backend_bound
# 22.6 % tma_bad_speculation
# 42.7 % tma_frontend_bound
# 17.1 % tma_retiring
TopdownL2 # 21.8 % tma_branch_mispredicts
# 11.5 % tma_core_bound
# 13.4 % tma_fetch_bandwidth
# 29.3 % tma_fetch_latency
# 2.7 % tma_heavy_operations
# 14.5 % tma_light_operations
# 0.8 % tma_machine_clears
# 6.1 % tma_memory_bound
1.001712086 seconds time elapsed
0.000151000 seconds user
0.001618000 seconds sys
Reviewed-by: Ian Rogers <[email protected]>
Signed-off-by: Kan Liang <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Ahmad Yasin <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The new default mode will print the metrics as a metric group. The
metrics from the same metric group must be adjacent to each other in the
metric list. But the metric_list_cmp() sorts metrics by the number of
events.
Add a new sort for the Default metricgroup, which sorts by
default_metricgroup_name and metric_name.
Add is_default in the struct metric_event to indicate that it's from
the Default metricgroup.
Store the displayed metricgroup name of the Default metricgroup into
the metric expr for output.
Reviewed-by: Ian Rogers <[email protected]>
Signed-off-by: Kan Liang <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Ahmad Yasin <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
There may be multiplexing triggered, e.g., e-core of ADL.
Reviewed-by: Ian Rogers <[email protected]>
Signed-off-by: Kan Liang <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Ahmad Yasin <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Introduce a new metricgroup, Default, to tag all the metric groups which
will be collected in the default mode.
Add a new field, DefaultMetricgroupName, in the JSON file to indicate
the real metric group name. It will be printed in the default output
to replace the event names.
There is nothing changed for the output format.
On SPR, both TopdownL1 and TopdownL2 are displayed in the default
output.
On ARM, Intel ICL and later platforms (before SPR), only TopdownL1 is
displayed in the default output.
Suggested-by: Stephane Eranian <[email protected]>
Reviewed-by: Ian Rogers <[email protected]>
Signed-off-by: Kan Liang <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Ahmad Yasin <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
For the default output, the default metric group could vary on different
platforms. For example, on SPR, the TopdownL1 and TopdownL2 metrics
should be displayed in the default mode. On ICL, only the TopdownL1
should be displayed.
Add a flag so we can tag the default metric group for different
platforms rather than hack the perf code.
The flag is added to Intel TopdownL1 since ICL and ADL, TopdownL2
metrics since SPR.
Add a new field, DefaultMetricgroupName, in the JSON file to indicate
the real metric group name.
Reviewed-by: Ian Rogers <[email protected]>
Signed-off-by: Kan Liang <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Ahmad Yasin <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The annotation for hardware events is wrong on hybrid. For example,
# ./perf stat -a sleep 1
Performance counter stats for 'system wide':
32,148.85 msec cpu-clock # 32.000 CPUs utilized
374 context-switches # 11.633 /sec
33 cpu-migrations # 1.026 /sec
295 page-faults # 9.176 /sec
18,979,960 cpu_core/cycles/ # 590.378 K/sec
261,230,783 cpu_atom/cycles/ # 8.126 M/sec (54.21%)
17,019,732 cpu_core/instructions/ # 529.404 K/sec
38,020,470 cpu_atom/instructions/ # 1.183 M/sec (63.36%)
3,296,743 cpu_core/branches/ # 102.546 K/sec
6,692,338 cpu_atom/branches/ # 208.167 K/sec (63.40%)
96,421 cpu_core/branch-misses/ # 2.999 K/sec
1,016,336 cpu_atom/branch-misses/ # 31.613 K/sec (63.38%)
The hardware events have extended type on hybrid, but the evsel__match()
doesn't take it into account.
Filter the config on hybrid before checking.
With the patch,
# ./perf stat -a sleep 1
Performance counter stats for 'system wide':
32,139.90 msec cpu-clock # 32.003 CPUs utilized
343 context-switches # 10.672 /sec
32 cpu-migrations # 0.996 /sec
73 page-faults # 2.271 /sec
13,712,841 cpu_core/cycles/ # 0.000 GHz
258,301,691 cpu_atom/cycles/ # 0.008 GHz (54.20%)
12,428,163 cpu_core/instructions/ # 0.91 insn per cycle
37,786,557 cpu_atom/instructions/ # 2.76 insn per cycle (63.35%)
2,418,826 cpu_core/branches/ # 75.259 K/sec
6,965,962 cpu_atom/branches/ # 216.739 K/sec (63.38%)
72,150 cpu_core/branch-misses/ # 2.98% of all branches
1,032,746 cpu_atom/branch-misses/ # 42.70% of all branches (63.35%)
Suggested-by: Ian Rogers <[email protected]>
Reviewed-by: Ian Rogers <[email protected]>
Signed-off-by: Kan Liang <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Ahmad Yasin <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
We write an address then a ',' to addr2line. With inline data we
generally get back (// are my comments):
0x1234 // address
foo // function name
foo.c:123 // filename:line
bar // function name
bar.c:123 // filename:line
0x000000000000000 // sentinel address created by ','
?? // unknown function name
??:0 // unknown filename:line
The code was assuming the inline data also had the address, which is
incorrect. This means the first inline function name (bar above) needs
to be checked to see if it is the sentinel, otherwise to be treated as
a function name. The regression was caused by the addition of
addresses as the kernel is reporting a symbol at address 0 (used by
GNU binutils when it interprets ',').
Committer testing:
Using:
# perf trace --call-graph=dwarf -e lock:contention_*
<SNIP>
1244.615 TaskCon~ller #/2645281 lock:contention_begin(lock_addr: 0xffff8e6748da5ab0, flags: 2)
__preempt_count_dec_and_test (inlined)
trace_contention_begin (inlined)
trace_contention_begin (inlined)
rwsem_down_read_slowpath ([kernel.kallsyms])
__preempt_count_dec_and_test (inlined)
trace_contention_begin (inlined)
trace_contention_begin (inlined)
rwsem_down_read_slowpath ([kernel.kallsyms])
__down_read_common (inlined)
__down_read (inlined)
down_read ([kernel.kallsyms])
arch_static_branch (inlined)
static_key_false (inlined)
__mmap_lock_trace_acquire_returned (inlined)
mmap_read_lock (inlined)
do_user_addr_fault ([kernel.kallsyms])
arch_local_irq_disable (inlined)
handle_page_fault (inlined)
exc_page_fault ([kernel.kallsyms])
asm_exc_page_fault ([kernel.kallsyms])
[0x4def008] (/usr/lib64/firefox/libxul.so)
1244.619 TaskCon~ller #/2645281 lock:contention_end(lock_addr: 0xffff8e6748da5ab0)
__preempt_count_dec_and_test (inlined)
trace_contention_end (inlined)
trace_contention_end (inlined)
rwsem_down_read_slowpath ([kernel.kallsyms])
__preempt_count_dec_and_test (inlined)
trace_contention_end (inlined)
trace_contention_end (inlined)
rwsem_down_read_slowpath ([kernel.kallsyms])
__down_read_common (inlined)
__down_read (inlined)
down_read ([kernel.kallsyms])
arch_static_branch (inlined)
static_key_false (inlined)
__mmap_lock_trace_acquire_returned (inlined)
mmap_read_lock (inlined)
do_user_addr_fault ([kernel.kallsyms])
arch_local_irq_disable (inlined)
handle_page_fault (inlined)
exc_page_fault ([kernel.kallsyms])
asm_exc_page_fault ([kernel.kallsyms])
<SNIP>
Fixes: 8dc26b6f718a8118 ("perf srcline: Make sentinel reading for binutils addr2line more robust")
Reported-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Ian Rogers <[email protected]>
Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: [email protected]
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Nathan Chancellor <[email protected]>
Cc: Nick Desaulniers <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Tom Rix <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
addr2line may fail to send expected values causing perf to wait
indefinitely. Add a 1 second timeout (twice the timeout for reading from
/proc/pid/maps) so that such reads don't cause perf to appear to lock
up.
There are already checks that the file for addr2line contains a debug
section but this isn't always sufficient. The problem was observed when
a valid elf file would set the configuration for binutils addr2line,
then a later read of vmlinux with ELF debug sections would cause a
failing write/read which would block indefinitely.
As a service to future readers, if the io hits eof or an error, cleanup
the addr2line process.
Signed-off-by: Ian Rogers <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Yang Jihong <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Found by leak sanitizer:
```
==1632594==ERROR: LeakSanitizer: detected memory leaks
Direct leak of 21 byte(s) in 1 object(s) allocated from:
#0 0x7f2953a7077b in __interceptor_strdup ../../../../src/libsanitizer/asan/asan_interceptors.cpp:439
#1 0x556701d6fbbf in perf_env__read_cpuid util/env.c:369
#2 0x556701d70589 in perf_env__cpuid util/env.c:465
#3 0x55670204bba2 in x86__is_amd_cpu arch/x86/util/env.c:14
#4 0x5567020487a2 in arch__post_evsel_config arch/x86/util/evsel.c:83
#5 0x556701d8f78b in evsel__config util/evsel.c:1366
#6 0x556701ef5872 in evlist__config util/record.c:108
#7 0x556701cd6bcd in test__PERF_RECORD tests/perf-record.c:112
#8 0x556701cacd07 in run_test tests/builtin-test.c:236
#9 0x556701cacfac in test_and_print tests/builtin-test.c:265
#10 0x556701cadddb in __cmd_test tests/builtin-test.c:402
#11 0x556701caf2aa in cmd_test tests/builtin-test.c:559
#12 0x556701d3b557 in run_builtin tools/perf/perf.c:323
#13 0x556701d3bac8 in handle_internal_command tools/perf/perf.c:377
#14 0x556701d3be90 in run_argv tools/perf/perf.c:421
#15 0x556701d3c3f8 in main tools/perf/perf.c:537
#16 0x7f2952a46189 in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58
SUMMARY: AddressSanitizer: 21 byte(s) leaked in 1 allocation(s).
```
Fixes: f7b58cbdb3ff36eb ("perf mem/c2c: Add load store event mappings for AMD")
Signed-off-by: Ian Rogers <[email protected]>
Acked-by: Ravi Bangoria <[email protected]>
Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Ravi Bangoria <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Add the default tags for ARM as well.
Signed-off-by: Kan Liang <[email protected]>
Acked-by: Ian Rogers <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Ahmad Yasin <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jing Zhang <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: John Garry <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
A new field metricgroup has been added in the perf stat JSON output.
Support it in the test case.
Signed-off-by: Kan Liang <[email protected]>
Acked-by: Ian Rogers <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Ahmad Yasin <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Test "perf script task-analyzer tests" fails in environment with missing
libtraceevent support, as perf record fails to create the perf.data
file, which further tests depend on.
Instead, when perf is not compiled with libtraceevent support, skip
those tests instead of failing them, by checking the output of `perf
record --dry-run` to see if it prints the error "libtraceevent is
necessary for tracepoint support"
For the following output, perf compiled with: `make NO_LIBTRACEEVENT=1`
Before the patch:
108: perf script task-analyzer tests :
test child forked, pid 24105
failed to open perf.data: No such file or directory (try 'perf record' first)
FAIL: "invokation of perf script report task-analyzer command failed" Error message: ""
FAIL: "test_basic" Error message: "Failed to find required string:'Comm'."
failed to open perf.data: No such file or directory (try 'perf record' first)
FAIL: "invokation of perf script report task-analyzer --ns --rename-comms-by-tids 0:random command failed" Error message: ""
FAIL: "test_ns_rename" Error message: "Failed to find required string:'Comm'."
failed to open perf.data: No such file or directory (try 'perf record' first)
<...>
perf script task-analyzer tests: FAILED!
With this patch, the script instead returns 2 signifying SKIP, and after
the patch:
108: perf script task-analyzer tests :
test child forked, pid 26010
libtraceevent is necessary for tracepoint support
WARN: Skipping tests. No libtraceevent support
test child finished with -2
perf script task-analyzer tests: Skip
Fixes: e8478b84d6ba9ccf ("perf test: Add new task-analyzer tests")
Signed-off-by: Aditya Gupta <[email protected]>
Cc: Disha Goel <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: John Garry <[email protected]>
Cc: Madhavan Srinivasan <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Petar Gligoric <[email protected]>
Cc: Ravi Bangoria <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Athira Rajeev <[email protected]>
Signed-off-by: Kajol Jain <[email protected]>
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Instead of printing "perf command failed" everytime, print the exact
command that run earlier
Signed-off-by: Aditya Gupta <[email protected]>
Acked-by: Hagen Paul Pfeifer <[email protected]>
Cc: Disha Goel <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: John Garry <[email protected]>
Cc: Madhavan Srinivasan <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Ravi Bangoria <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Athira Rajeev <[email protected]>
Signed-off-by: Kajol Jain <[email protected]>
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
${$1} gives bad substitution error on sh, bash, and zsh. This seems like
a typo, and this patch modifies it to $1, since that is what it's usage
looks like from wherever `check_exec_0` is called.
This issue due to ${$1} caused all function calls to give error in
`find_str_or_fail` line, and so no test runs completely. But
'perf test "perf script task-analyzer tests"' wrongly reports
that tests passed with the status OK, which is wrong considering
the tests didn't even run completely
Fixes: e8478b84d6ba9ccf ("perf test: add new task-analyzer tests")
Signed-off-by: Aditya Gupta <[email protected]>
Signed-off-by: Athira Rajeev <[email protected]>
Signed-off-by: Kajol Jain <[email protected]>
Cc: Disha Goel <[email protected]>
Cc: Hagen Paul Pfeifer <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: John Garry <[email protected]>
Cc: Madhavan Srinivasan <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Petar Gligoric <[email protected]>
Cc: Ravi Bangoria <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Running shellcheck -S on stat+shadow_stat.sh testcase, generates
SC2046 and SC2034 warnings,
$ shellcheck -S warning tests/shell/stat+shadow_stat.sh
res=`printf "%.2f" $(echo "scale=6; $num / $cyc" | bc -q)`
: Quote this to prevent word splitting
To address the POSIX shell warnings used quotes in the printf
expressions, to prevent word splitting.
Signed-off-by: Spoorthy S <[email protected]>
Cc: Disha Goel <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: John Garry <[email protected]>
Cc: Madhavan Srinivasan <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Ravi Bangoria <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Athira Rajeev <[email protected]>
Signed-off-by: Kajol Jain <[email protected]>
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Fix all the POSIX sh warnings in perf shell test test_brstack.sh
Warnings fixed :
* In POSIX sh, using lower/mixed case for signal names is undefined.
Correcting that in this script.
* In POSIX sh, 'local' is undefined.
local is supported in many shells, but it's not in POSIX.
In POSIX sh, you can adopt some convention to avoid accidentally
overwriting variables names, e.g. prefixing with the function name,
that is what I have done here.
Signed-off-by: Geetika <[email protected]>
Cc: Disha Goel <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: John Garry <[email protected]>
Cc: Madhavan Srinivasan <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Ravi Bangoria <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Athira Rajeev <[email protected]>
Signed-off-by: Kajol Jain <[email protected]>
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Fixed the shellcheck warnings in buildid.sh, record+probe_libc_inet_pton.sh
and record+script_probe_vfs_getname.sh perf shell scripts:
1. Prefer [ p ] && [ q ] as [ p -a q ] is not well defined.
2. Prefer [ p ] || [ q ] as [ p -o q ] is not well defined.
3. Used * argument to avoid the argument mixes string and array
4. Resolved issue for variable refernce, where the variable is
being used before it has been initialized.
5. Resolved word splitting issue (syntax error).
6. The "err" variable has been removed from buildid.sh since
it is not used anywhere in the code.
Signed-off-by: Samir Mulani <[email protected]>
Cc: Disha Goel <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: John Garry <[email protected]>
Cc: Madhavan Srinivasan <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Ravi Bangoria <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Athira Rajeev <[email protected]>
Signed-off-by: Kajol Jain <[email protected]>
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Use quotes around variables to prevent POSIX word expansion, use
uppercase for signals(INT, TERM, EXIT) to avoid mixed/lower case naming
of signals and replace "==" with "=" as "==" is not supported by POSIX
shell.
Signed-off-by: Abhirup Deb <[email protected]>
Cc: Disha Goel <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: John Garry <[email protected]>
Cc: Madhavan Srinivasan <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Ravi Bangoria <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anushree Mathur <[email protected]>
Signed-off-by: Athira Rajeev <[email protected]>
Signed-off-by: Kajol Jain <[email protected]>
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Running shellcheck -S on test_arm_spe.sh throws below warnings:
#shellcheck -S warning tests/shell/test_arm_spe.sh
In tests/shell/test_arm_spe.sh line 30:
trap cleanup_files exit term int
^--^ SC3049 (warning): In POSIX sh, using lower/mixed case for signal names is undefined.
^--^ SC3049 (warning): In POSIX sh, using lower/mixed case for signal names is undefined.
^-^ SC3049 (warning): In POSIX sh, using lower/mixed case for signal names is undefined.
Fixed this issue by using uppercase for "EXIT", "TERM" and
"INIT" signals to avoid using lower/mixed case for signal
names as input.
Signed-off-by: Abhirup Deb <[email protected]>
Cc: Disha Goel <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: John Garry <[email protected]>
Cc: Madhavan Srinivasan <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Ravi Bangoria <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Athira Rajeev <[email protected]>
Signed-off-by: Kajol Jain <[email protected]>
Signed-off-by: Mukesh Chaurasiya <[email protected]>
Signed-off-by: Ojaswin Mujoo <[email protected]>
Signed-off-by: Piyush Sachdeva <[email protected]>
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Fixed the following shellcheck issues in test_task_analyzer.sh file:
SC2086: Double quote to prevent globbing and word splitting
warnings in shell-check.
Fixes the following shellcheck issues,
SC2086: Double quote to prevent globbing and word splitting
warnings in shell-check.
Before Patch:
$ shellcheck ./test_task_analyzer.sh | grep "SC2086" | ...
In ./test_task_analyzer.sh line 13:
SC2086: Double quote to prevent globbing and word splitting.
In ./test_task_analyzer.sh line 24:
SC2086: Double quote to prevent globbing and word splitting.
In ./test_task_analyzer.sh line 39:
SC2086: Double quote to prevent globbing and word splitting.
After Patch:
$ shellcheck ./test_task_analyzer.sh | grep -i "SC2086"
None
perf test result after patch:
PASS: "test_basic"
PASS: "test_ns_rename"
PASS: "test_ms_filtertasks_highlight"
PASS: "test_extended_times_timelimit_limittasks"
PASS: "test_summary"
PASS: "test_summaryextended"
PASS: "test_summaryonly"
PASS: "test_extended_times_summary_ns"
PASS: "test_extended_times_summary_ns"
PASS: "test_csv"
PASS: "test_csvsummary"
PASS: "test_csv_extended_times"
PASS: "test_csvsummary_extended"
Signed-off-by: Aboorva Devarajan <[email protected]>
Cc: Disha Goel <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: John Garry <[email protected]>
Cc: Madhavan Srinivasan <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Ravi Bangoria <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Athira Rajeev <[email protected]>
Signed-off-by: Kajol Jain <[email protected]>
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Fixed shellcheck warning SC2076 in stat_all_metrics.sh.
Before the patch:
shell$ shellcheck stat_all_metrics.sh
In stat_all_metrics.sh line 9:
if [[ "$result" =~ "${m:0:50}" ]] || [[ "$result" =~ "<not supported>" ]]
^---------^ SC2076: Don't quote right-hand
side of =~, it'll match literally rather than as a regex.
In stat_all_metrics.sh line 15:
if [[ "$result" =~ "${m:0:50}" ]]
^---------^ SC2076: Don't quote right-hand
side of =~, it'll match literally rather than as a regex.
In stat_all_metrics.sh line 22:
if [[ "$result" =~ "${m:0:50}" ]]
^---------^ SC2076: Don't quote right-hand
side of =~, it'll match literally rather than as a regex.
After the patch:
shell$ shellcheck stat_all_metrics.sh
shell$
Signed-off-by: Barnali Guha Thakurata <[email protected]>
Cc: Disha Goel <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: John Garry <[email protected]>
Cc: Madhavan Srinivasan <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Ravi Bangoria <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Athira Rajeev <[email protected]>
Signed-off-by: Kajol Jain <[email protected]>
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Fixed the following shellcheck issues in test_arm_coresight.sh file:
In tools/perf/tests/shell/test_arm_coresight.sh line 31:
trap - exit term int
^--^ SC2039: In POSIX sh, using lower/mixed case for signal names is undefined.
^--^ SC2039: In POSIX sh, using lower/mixed case for signal names is undefined.
^-^ SC2039: In POSIX sh, using lower/mixed case for signal names is undefined.
In tools/perf/tests/shell/test_arm_coresight.sh line 35:
trap cleanup_files exit term int
^--^ SC2039: In POSIX sh, using lower/mixed case for signal names is undefined.
^--^ SC2039: In POSIX sh, using lower/mixed case for signal names is undefined.
^-^ SC2039: In POSIX sh, using lower/mixed case for signal names is undefined.
In tools/perf/tests/shell/test_arm_coresight.sh line 92:
if [ $? -eq 0 -a -e "$1/enable_sink" ]; then
^-- SC2166: Prefer [ p ] && [ q ] as [ p -a q ] is not well defined.
Fixed above warnings by:
1)Capitalize signals(INT, TERM, EXIT) to avoid mixed/lower case naming of
signals.
2)Expression [p -a q] was not defined,changed it to [p] && [q] to avoid the
ambiguity as this is older format using -a or -o ,now we use [p] && [q] in
place of [p -a q] and [p] || [q] in place of [p -o q].
Result after fixing the issues:
shell$ shellcheck -S warning test_arm_coresight.sh
shell$
Signed-off-by: Anushree Mathur <[email protected]>
Cc: Disha Goel <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: John Garry <[email protected]>
Cc: Madhavan Srinivasan <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Ravi Bangoria <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Athira Rajeev <[email protected]>
Signed-off-by: Kajol Jain <[email protected]>
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Running the shellcheck on stat+csv_output resulted in the following
warning.
Result with shellcheck without patch:
=====
$ shellcheck -S warning stat+csv_output.sh
In stat+csv_output.sh line 23:
[ $(uname -m) = "s390x" ] && exp='^[6-7]$'
^---------^ SC2046: Quote this to prevent word splitting.
In stat+csv_output.sh line 51:
[ $(id -u) != 0 ] && [ $(cat /proc/sys/kernel/perf_event_paranoid) -gt $1 ]
^------^ SC2046: Quote this to prevent word splitting.
^-- SC2046: Quote this to prevent word splitting.
=====
Fixed the warning SC2046 by adding quotes to prevent word splitting.
Result with shellcheck with patch:
=====
$ shellcheck -S warning tests/shell/stat+csv_output.sh
$ ./perf test "stat CSV output linter"
96: perf stat CSV output linter : Ok
=====
Signed-off-by: Korrapati Likhitha <[email protected]>
Cc: Disha Goel <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: John Garry <[email protected]>
Cc: Madhavan Srinivasan <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Ravi Bangoria <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Athira Rajeev <[email protected]>
Signed-off-by: Kajol Jain <[email protected]>
Signed-off-by: Sathvika Vasireddy <[email protected]>
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Running shellcheck -S on daemon.sh throws below warnings:
Result from shellcheck:
# shellcheck -S warning daemon.sh
local line_name=`echo "${line}" | awk 'BEGIN { FS = ":" } ; { print $2 }'`
^-------^ SC2155: Declare and assign separately to avoid masking return values.
trap "echo 'FAILED: Signal caught'; daemon_exit ${config}; exit 1" SIGINT SIGTERM
^-------^ SC2064: Use single quotes, otherwise this expands now rather than when signalled.
count=`ls ${base}/session-test/ | grep perf.data | wc -l`
^-- SC2010: Don't use ls | grep. Use a glob or a for loop with a condition to allow non-alphanumeric filenames.
if [ ${size} != "OK" -o ${type} != "OK" ]; then
^-- SC2166: Prefer [ p ] || [ q ] as [ p -o q ] is not well defined.
Fixed above warnings by:
- declaring and assigning local variables separately
- To fix SC2010, instead of using "ls | grep", used glob to allow non-alphanumeric filenames
- Used single quotes to prevent expanding.
Result from shellcheck after patch changes:
$ shellcheck -S warning daemon.sh
$ echo $?
0
Signed-off-by: Shirisha G <[email protected]>
Cc: Disha Goel <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: John Garry <[email protected]>
Cc: Madhavan Srinivasan <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Ravi Bangoria <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Athira Rajeev <[email protected]>
Signed-off-by: Kajol Jain <[email protected]>
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
and adding double quotes for expression
Running shellcheck -S on test_arm_calligraph_fp throws warnings SC2086 and SC3049,
$shellcheck -S warning tests/shell/test_arm_callgraph_fp.sh
rm -f $PERF_DATA
: Double quote to prevent globbing and word splitting.
trap cleanup_files exit term int
: In POSIX sh, using lower/mixed case for signal names is undefined.
After fixing the warnings,
$shellcheck tests/shell/test_arm_callgraph_fp.sh
$ echo $?
0
To address the POSIX shell warnings added changes to convert Lowercase
signal names to uppercase in the script and double quoted the
command substitutions($fix to "$fix") to solve Globbing warnings.
Signed-off-by: Spoorthy S<[email protected]>
Cc: Disha Goel <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: John Garry <[email protected]>
Cc: Madhavan Srinivasan <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Ravi Bangoria <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Athira Rajeev <[email protected]>
Signed-off-by: Kajol Jain <[email protected]>
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Running shellcheck on stat+json_output testcase, generates below warning:
[ $(id -u) != 0 ] && [ $(cat /proc/sys/kernel/perf_event_paranoid) -gt $1 ]
^------^ SC2046 (warning): Quote this to prevent word splitting.
^-- SC2046 (warning): Quote this to prevent word splitting.
Fixed the warning by adding quotes to avoid word splitting.
ShellCheck result with patch:
# shellcheck -S warning stat+json_output.sh
#
perf test result after the change:
94: perf stat JSON output linter : Ok
Signed-off-by: Disha Goel <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: John Garry <[email protected]>
Cc: Kajol Jain <[email protected]>
Cc: Madhavan Srinivasan <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Ravi Bangoria <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/linux-perf-users/[email protected]
Signed-off-by: Athira Rajeev <[email protected]>
Signed-off-by: Kajol Jain <[email protected]>
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The arm-cs-trace-disasm.py script doesn't use the sys library, so remove
the import.
Report by pylint:
W0611: Unused import sys (unused-import)
Signed-off-by: Sourabh Jain <[email protected]>
Cc: Athira Rajeev <[email protected]>
Cc: Disha Goel <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: John Garry <[email protected]>
Cc: Kajol Jain <[email protected]>
Cc: Madhavan Srinivasan <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Ravi Bangoria <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/linux-perf-users/[email protected]
Signed-off-by: Athira Rajeev <[email protected]>
Signed-off-by: Kajol Jain <[email protected]>
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
There are multiple places where x86 specific code determines AMD vs
Intel arch and acts based on that. Consolidate those checks into a
single function.
Signed-off-by: Ravi Bangoria <[email protected]>
Acked-by: Ian Rogers <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Ali Saidi <[email protected]>
Cc: Ananth Narayan <[email protected]>
Cc: James Clark <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Madhavan Srinivasan <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Sandipan Das <[email protected]>
Cc: Santosh Shukla <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
There's no need to read the string ':' or '/' for PE_BP_COLON or
PE_BP_SLASH and doing so causes parse-events.y to leak memory.
The original patch has a committer note about not using these tokens
presumably as yacc spotted they were a memory leak because no
%destructor could be run. Remove the unused token workaround as there
is now no value associated with these tokens.
Fixes: f0617f526cb0c482 ("perf parse: Allow config terms with breakpoints")
Signed-off-by: Ian Rogers <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Rob Herring <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The no group check fails if there is more than one meticgroup in the
metricgroup_no_group.
The first parameter of the match_metric() should be the string, while
the substring should be the second parameter.
Fixes: ccc66c6092802d68 ("perf metric: JSON flag to not group events if gathering a metric group")
Signed-off-by: Kan Liang <[email protected]>
Acked-by: Ian Rogers <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Ahmad Yasin <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The addr2line process is sent an address then multiple function,
filename:line "records" are read. To detect the end of output a ',' is
sent and for llvm-addr2line a ',' is then read back showing the end of
addrline's output.
For binutils addr2line the ',' translates to address 0 and we expect the
bogus filename marker "??:0" (see filename_split) to be sent from
addr2line.
For some kernels address 0 may have a mapping and so a seemingly valid
inline output is given and breaking the sentinel discovery:
```
$ addr2line -e vmlinux -f -i
,
__per_cpu_start
./arch/x86/kernel/cpu/common.c:1850
```
To avoid this problem enable the address dumping for addr2line (the -a
option). If an address of 0x0000000000000000 is read then this is the
sentinel value working around the problem above.
The filename_split still needs to check for "??:0" as bogus non-zero
addresses also need handling.
Reported-by: Changbin Du <[email protected]>
Signed-off-by: Ian Rogers <[email protected]>
Tested-by: Changbin Du <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Nathan Chancellor <[email protected]>
Cc: Nick Desaulniers <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Tom Rix <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
To aid debugging why it fails. Also, combine the loops for reading a
line for the llvm/binutils cases.
Signed-off-by: Ian Rogers <[email protected]>
Tested-by: Changbin Du <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Nathan Chancellor <[email protected]>
Cc: Nick Desaulniers <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Tom Rix <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The "x86 instruction decoder - new instructions" test takes up space but
is only really useful to developers. Make it optional at build time.
Add variable EXTRA_TESTS which must be defined in order to build perf
with the test.
Example:
Before:
$ make -C tools/perf clean >/dev/null
$ make -C tools/perf >/dev/null
Makefile.config:650: No libunwind found. Please install libunwind-dev[el] >= 1.1 and/or set LIBUNWIND_DIR
Makefile.config:1149: libpfm4 not found, disables libpfm4 support. Please install libpfm4-dev
PERF_VERSION = 6.4.rc3.gd15b8c76c964
$ readelf -SW tools/perf/perf | grep '\.rela.dyn\|.rodata\|\.data.rel.ro'
[10] .rela.dyn RELA 000000000002fcb0 02fcb0 0748b0 18 A 6 0 8
[18] .rodata PROGBITS 00000000002eb000 2eb000 6bac00 00 A 0 0 32
[25] .data.rel.ro PROGBITS 00000000009ea180 9e9180 04b540 00 WA 0 0 32
After:
$ make -C tools/perf clean >/dev/null
$ make -C tools/perf >/dev/null
Makefile.config:650: No libunwind found. Please install libunwind-dev[el] >= 1.1 and/or set LIBUNWIND_DIR
Makefile.config:1154: libpfm4 not found, disables libpfm4 support. Please install libpfm4-dev
PERF_VERSION = 6.4.rc3.g4ea9c1569ea4
$ readelf -SW tools/perf/perf | grep '\.rela.dyn\|.rodata\|\.data.rel.ro'
[10] .rela.dyn RELA 000000000002f3c8 02f3c8 036d68 18 A 6 0 8
[18] .rodata PROGBITS 00000000002ac000 2ac000 68da80 00 A 0 0 32
[25] .data.rel.ro PROGBITS 000000000097d440 97c440 022280 00 WA 0 0 32
Committer notes:
Build with 'make EXTRA_TESTS=1 -C tools/perf O=/tmp/build/perf" and
reproduced the ELF section size differences.
Signed-off-by: Adrian Hunter <[email protected]>
Acked-by: Ian Rogers <[email protected]>
Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
It's possible some struct/union/enum type don't have type name. Allow
the empty name after "struct"/"union"/"enum" string rather than fail.
Signed-off-by: Namhyung Kim <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Masami Hiramatsu <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The die_get_varname() returns "(unknown_type)" string if it failed to
find a type for the variable. But it had a space before the opening
parenthesis and it made the closing parenthesis cut off due to the
off-by-one in the string length (14).
Signed-off-by: Namhyung Kim <[email protected]>
Fixes: 88fd633cdfa19060 ("perf probe: No need to use formatting strbuf method")
Cc: Adrian Hunter <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Masami Hiramatsu <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Fixes: d1f1cecc92ae0dba ("perf list: Check if libpfm4 event is supported")
Reported-by: kernel test robot <[email protected]>
Closes: https://lore.kernel.org/r/[email protected]/
Cc: Namhyung Kim <[email protected]>
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The llvm-objdump adds a space between the operands while GNU objdump
does not. Allow a space to handle the both.
In GNU objdump:
Disassembly of section .text: here
|
ffffffff81000000 <_stext>: v
ffffffff81000000: 48 8d 25 51 1f 40 01 lea 0x1401f51(%rip),%rsp
ffffffff81000007: e8 d4 00 00 00 call ffffffff810000e0 <verify_cpu>
ffffffff8100000c: 48 8d 3d ed ff ff ff lea -0x13(%rip),%rdi
In llvm-objdump:
Disassembly of section .text: here
|
ffffffff81000000 <startup_64>: v
ffffffff81000000: 48 8d 25 51 1f 40 01 leaq 20979537(%rip), %rsp
ffffffff81000007: e8 d4 00 00 00 callq 0xffffffff810000e0 <verify_cpu>
ffffffff8100000c: 48 8d 3d ed ff ff ff leaq -19(%rip), %rdi
Signed-off-by: Namhyung Kim <[email protected]>
Acked-by: Ian Rogers <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Masami Hiramatsu <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The event_buf is 64kb (PERF_SAMPLE_SIZE_MAX) and stack allocated in
struct perf_inject. It is used for guest events that may not exist in
a file. Make the array allocation lazy to cut down on the stack usage.
Signed-off-by: Ian Rogers <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The event_copy is 64kb (PERF_SAMPLE_SIZE_MAX) and stack allocated in
struct perf_inject. It is used for aux events that may not exist in a
file. Make the array allocation lazy to cut down on the stack usage.
Signed-off-by: Ian Rogers <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Some char buffers are stack allocated but in total they come to
24kb. Avoid Wstack-usage warnings by moving the arrays to being
dynamically allocated.
Signed-off-by: Ian Rogers <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Commit 5ded57ac1bdb ("perf inject: Remove static variables") moved
static variables to local, however, in this case 3 MAX_CPUS (4096)
sized arrays were moved onto the stack making the stack frame quite
large. Avoid the stack usage by dynamically allocating the arrays.
Signed-off-by: Ian Rogers <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Place sender and receiver contexts onto lists so that they may be
freed on exit. Add missing pthread_attr_destroy. Fixes memory leaks
reported by leak sanitizer.
Signed-off-by: Ian Rogers <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: André Almeida <[email protected]>
Cc: Darren Hart <[email protected]>
Cc: Davidlohr Bueso <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Remove code sharing the pthread_attr_t and initialize/destroy
pthread_attr_t when needed. This avoids the same attribute being set
that leak sanitizer reports as a memory leak.
Signed-off-by: Ian Rogers <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: André Almeida <[email protected]>
Cc: Darren Hart <[email protected]>
Cc: Davidlohr Bueso <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Issues detected by leak sanitizer.
Signed-off-by: Ian Rogers <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: André Almeida <[email protected]>
Cc: Darren Hart <[email protected]>
Cc: Davidlohr Bueso <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Avoid potential memory leaks.
Committer notes:
This is right before calling exit(1), so just to clean up memory leak
checker detection.
Signed-off-by: Ian Rogers <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: André Almeida <[email protected]>
Cc: Darren Hart <[email protected]>
Cc: Davidlohr Bueso <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Assert that our own tracking of the exception level matches what
OpenCSD provides. OpenCSD doesn't distinguish between EL0 and EL1 in the
memory access callback so the extra tracking was required. But a rough
assert can still be done.
Signed-off-by: James Clark <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: John Garry <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Mike Leach <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Suzuki Poulouse <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: [email protected]
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Currently we assume all trace belongs to the host machine so when
the decoder should be looking at the guest kernel maps it can crash
because it looks at the host ones instead.
Avoid one scenario (guest kernel running at EL1) by assigning the
default guest machine to this trace. For userspace trace it's still not
possible to determine guest vs host, but the PIDs should help in this
case.
Committer notes:
Fixed up conflict with:
perf addr_location: Add init/exit/copy functions
That was only on tmp.perf-tools-next.
Reviewed-by: Leo Yan <[email protected]>
Signed-off-by: James Clark <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: John Garry <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Mike Leach <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Suzuki Poulouse <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: [email protected]
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
To avoid every user of PID format having to use their own static
local variable, cache it on initialisation and change the accessor to
take struct cs_etm_auxtrace.
Reviewed-by: Leo Yan <[email protected]>
Signed-off-by: James Clark <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: John Garry <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Mike Leach <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Suzuki Poulouse <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: [email protected]
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Branch samples currently use the IP of the previous packet as the from
IP, and the IP of the current packet as the to IP. But it incorrectly
uses the current thread. In some cases like a jump into a different
exception level this will attribute to the incorrect process.
Fix it by tracking the previous thread in the same way the previous
packet is tracked.
Committer notes:
Resolved conflicts with:
perf addr_location: Add init/exit/copy functions
perf thread: Add accessor functions for thread
Reviewed-by: Mike Leach <[email protected]>
Signed-off-by: James Clark <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: John Garry <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Suzuki Poulouse <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: [email protected]
Cc: [email protected]
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
PIDs and TIDs are already contained within the thread struct, so to
avoid inconsistencies drop the extra members on the etm queue and only
use the thread struct.
At the same time stop using the 'unknown' thread. In a later commit
we will be making samples from multiple machines so it will be better
to use the idle thread of each machine rather than overlapping unknown
threads. Using the idle thread is also better because kernel addresses
with a previously unknown thread will now be assigned to a real kernel
thread.
Committer notes:
Resolved conflicts with:
perf addr_location: Add init/exit/copy functions
perf thread: Add accessor functions for thread
perf thread: Remove notion of dead threads
That were present in tmp.perf-tools.next only.
Reviewed-by: Leo Yan <[email protected]>
Reviewed-by: Mike Leach <[email protected]>
Signed-off-by: James Clark <[email protected]>
Acked-by: Suzuki Poulouse <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: John Garry <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Suzuki Poulouse <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: [email protected]
Cc: [email protected]
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|