| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Unlike futex-hash, requeuing and wakeup benchmarks do not support shared
futexes, limiting the usefulness of the programs. Correct this, and
allow using the local -S parameter. The default remains using private
futexes.
Signed-off-by: Davidlohr Bueso <[email protected]>
Cc: Davidlohr Bueso <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Using 'perf trace' for mmap is truncating return values by stripping the
top 32 bits, actually printing only the lower 32 bits.
This was because the ret value was of an 'int' type and not a 'long'
type.
The Problem:
991258501.244 ( 0.004 ms): mmap(len: 40001536, prot: READ|WRITE, flags: PRIVATE|ANONYMOUS, fd: -1) = 0x56691000
991258501.257 ( 0.000 ms): minfault [_int_malloc+0x1038] => //anon@0x7fa056691008 //(d.)
The first line shows an mmap, which succeeds and returns 0x56691000.
However the next line shows a memory access to that virtual memory area,
specifically to 0x7fa056691008. The upper 32 bit is lost due to the
problem mentioned above, and thus mmap's return value didn't have the
upper 0x7fa0.
Tested on 3.17-rc5 from the linus's tree, and the HEAD of tip/master
Signed-off-by: Chang Hyun Park <[email protected]>
Cc: H. Peter Anvin <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Passing pointers to alias modifiers 'unit' and 'scale' isn't very
future-proof since if we add more modifiers to the list we'll end up
passing more arguments.
Instead wrap everything up in a struct perf_pmu_info, which can easily
be expanded when additional alias modifiers are necessary in the future.
Signed-off-by: Matt Fleming <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Cc: "H. Peter Anvin" <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
If we fail to parse the config file within the callback function,
the line number counter 'could be' already on the next line.
This results in wrong line number report like:
$ cat ~/.perfconfig
[call-graph]
sort-key = krava
$ perf record ls
Fatal: bad config file line 3 in /home/jolsa/.perfconfig
Fixing this by saving the current line number for this case.
Signed-off-by: Jiri Olsa <[email protected]>
Acked-by: Namhyung Kim <[email protected]>
Cc: Corey Ashford <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Milian Wolff <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
So that it'll be passed to perf_callchain_config().
Reviewed-by: David Ahern <[email protected]>
Signed-off-by: Namhyung Kim <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Milian Wolff <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
This patch adds support for following config options to ~/.perfconfig file.
[call-graph]
record-mode = dwarf
dump-size = 8192
print-type = fractal
order = callee
threshold = 0.5
print-limit = 128
sort-key = function
Reviewed-by: David Ahern <[email protected]>
Signed-off-by: Namhyung Kim <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Milian Wolff <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
And rename record_callchain_parse() to parse_callchain_record_opt() in
accordance to parse_callchain_report_opt().
Reviewed-by: David Ahern <[email protected]>
Signed-off-by: Namhyung Kim <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Milian Wolff <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
So that all callchain config parameters can be read/written to a single
place. It's a preparation to consolidate handling of all callchain
options.
Reviewed-by: David Ahern <[email protected]>
Signed-off-by: Namhyung Kim <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Milian Wolff <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Currently perf report -g graph option doesn't work as expected and
always work as same as -g fractal. This was a bug during recent
callchain print code cleanup.
Before:
$ perf report -g graph
Children Self Command Shared Object Symbol
================================================================
- 56.19% 35.41% sleep [kernel.kallsyms] [k] page_fault
- page_fault
+ 63.02% _dl_relocate_object
+ 36.98% clear_user
After:
Children Self Command Shared Object Symbol
================================================================
- 56.19% 35.41% sleep [kernel.kallsyms] [k] page_fault
- page_fault
+ 35.41% _dl_relocate_object
+ 20.78% clear_user
Reviewed-by: David Ahern <[email protected]>
Signed-off-by: Namhyung Kim <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Milian Wolff <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Use ACCESS_ONCE() instead of the cast to volatile and read. This is just
a style change which is reader friendly.
Signed-off-by: Pranith Kumar <[email protected]>
Acked-by: Namhyung Kim <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Because perf_session__new() can fail for more reasons than just ENOMEM,
modify error code(ENOMEM or EINVAL) to -1.
Signed-off-by: Taeung Song <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Acked-by: Namhyung Kim <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Currently perf record always errors out when you run it as non-root with
kptr_restrict == 1, which is often the default.
Make it only warn instead and fix the kernel resolve code to not
segfault later. Profiling works still fine, except kernel symbols are
not resolved.
Signed-off-by: Andi Kleen <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
On systems with more than one socket perf stat --per-core would either
segfault or stop before outputting all cores.
The problem was that the output code referenced the id including the
socket number in the higher bits, which is far beyond any per cpu array.
Mask out the socket number before referencing cpus in abs_printout.
I also renamed the variable in nsec_printout to be clear what it is,
even though it doesn't reference cpus.
Signed-off-by: Andi Kleen <[email protected]>
Acked-by: Stephane Eranian <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
So that we don't continue polling on vanished file descriptors, i.e.
file descriptors for events monitoring threads that exited.
I.e. the following 'trace' command now exits as expected, instead
of staying in an eternal loop:
$ sleep 5s &
$ trace -p `pidof sleep`
Reported-by: Jiri Olsa <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Don Zickus <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mike Galbraith <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: http://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
So that we don't continue polling on vanished file descriptors, i.e.
file descriptors for events monitoring threads that exited.
I.e. the following 'perf record' command now exits as expected, instead
of staying in an eternal loop:
$ sleep 5s &
$ perf record -p `pidof sleep`
Reported-by: Jiri Olsa <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Don Zickus <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mike Galbraith <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: http://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
As noticed by receiving a POLLHUP for all its pollfd entries.
That will remove the refcount taken in perf_evlist__mmap_per_evsel(),
and when all events are consumed via perf_evlist__mmap_read() +
perf_evlist__mmap_consume(), the ring buffer will be unmap'ed.
Thanks to Jiri Olsa for pointing out that we must wait till all events
are consumed, not being ok to unmmap just when receiving all the
POLLHUPs.
Cc: Adrian Hunter <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Corey Ashford <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jean Pihet <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
We will use this in perf's evlist class so that it can, at
fdarray__filter() time, to unmap the associated ring buffer.
We may need to have further info associated with each fdarray entry, in
that case we'll make that int array a 'union fdarray_priv' one and put a
pointer there so that users can stash whatever they want there. For now,
an int is enough tho.
v2: Add clarification to the per array entry priv area, as well as make
it a union, which makes usage a bit longer, but if/when we make it
use more space by allowing per entry pointers existing users source
code will not have to be changed, just rebuilt.
Cc: Adrian Hunter <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Corey Ashford <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jean Pihet <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Link: http://lkml.kernel.org/n/[email protected]
|
|
We need to know how many fds are using a perf mmap via
PERF_EVENT_IOC_SET_OUTPUT, so that we can know when to ditch an mmap,
refcount it.
v2: Automatically unmap it when the refcount hits one, which will happen
when all fds are filtered by perf_evlist__filter_pollfd(), in later
patches.
Cc: Adrian Hunter <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Corey Ashford <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jean Pihet <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Link: http://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The extensible file description array that grew in the perf_evlist class
can be useful for other tools, as it is not something that only evlists
need, so move it to tools/lib/api/fd to ease sharing it.
v2: Don't use {} like in:
libapi_dirs:
$(QUIET_MKDIR)mkdir -p $(OUTPUT){fs,fd}/
in Makefiles, as it will not work in some systems, as in ubuntu13.10.
v3: Add fd/*.[ch] to LIBAPIKFS_SOURCES (Fix from Jiri Olsa)
v4: Leave the fcntl(fd, O_NONBLOCK) in the evlist layer, remains to
be checked if it is really needed there, but has no place in the
fdarray class (Fix from Jiri Olsa)
v5: Remove evlist details from fdarray grow/filter tests. Improve it a
bit doing more tests about expected internal state.
Cc: Adrian Hunter <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Corey Ashford <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jean Pihet <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Since we have access two evlist members in all these poll calls, provide
a helper.
This will also help to make the patch introducing the pollfd class more
clear, as the evlist specific uses will be hiden away
perf_evlist__poll().
Acked-by: Jiri Olsa <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Corey Ashford <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jean Pihet <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Since we can add file descriptors to the evlist pollfd and it will
autogrow, no need to copy all events to a local pollfd array, just add
the timer and stdin file descriptors.
Reviewed-by: David Ahern <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Corey Ashford <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jean Pihet <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
[acme@ssdandy linux]$ perf test "Add fd"
34: Add fd to pollfd array, making it autogrow : Ok
[acme@ssdandy linux]$ perf test -v "Add fd"
34: Add fd to pollfd array, making it autogrow :
--- start ---
test child forked, pid 19817
before growing array: 2 [ 1, 2 ]
after 3rd add_pollfd: 3 [ 1, 2, 35 ]
after 4th add_pollfd: 4 [ 1, 2, 35, 88 ]
test child finished with 0
---- end ----
Add fd to pollfd array, making it autogrow: Ok
[acme@ssdandy linux]$
Acked-by: Jiri Olsa <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Corey Ashford <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jean Pihet <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
This way we will be able to add more file descriptors to be polled,
like stdin or some timer fd.
At this point we might as well yank the pollfd class from evlist so that
it can be used in other places.
Cc: Adrian Hunter <[email protected]>
Cc: Corey Ashford <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jean Pihet <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Because we want to notice when they get POLLHUP'ed, so that we can
figure out when all threads exited in a workload being monitored.
We can't just monitor the fds that were mmaped, we need to notice when
all the fds that were PERF_EVENT_IOC_SET_OUTPUT'ed too, because the mmap
stays even after the fd that originally was used to do the mmap call
went away, its only when all the set-output fds for a mmap are gone that
the mmap is.
Cc: Adrian Hunter <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Don Zickus <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mike Galbraith <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Link: http://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
We want to know when the fd went away, like when a monitored thread
exits.
If we do not monitor such events, then the tools will wait forever on
events from a vanished thread, like when running:
$ sleep 5s &
$ perf record -p `pidof sleep`
This builds upon the kernel patch by Jiri Olsa that actually makes a
poll on those file descriptors to return POLLHUP.
It is also needed to change the tools to use
perf_evlist__filter_pollfd() to check if there are remainings fds to
monitor or if all are gone, in which case they will exit the
poll/mmap/read loop.
Acked-by: Jiri Olsa <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Don Zickus <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mike Galbraith <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: http://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
That will use a synthetic evlist with just what is touched by this new
method to check that it works as expected.
Output in verbose mode:
$ perf test -v pollfd
33: Filter fds with revents mask in a pollfd array :
--- start ---
filtering all but pollfd[2]:
before: 5 [ 5, 4, 3, 2, 1 ]
after: 1 [ 3 ]
filtering all but (pollfd[0], pollfd[3]):
before: 5 [ 5, 4, 3, 2, 1 ]
after: 2 [ 5, 2 ]
test child finished with 0
---- end ----
Filter fds with revents mask in a pollfd array: Ok
$
Acked-by: Jiri Olsa <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Don Zickus <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mike Galbraith <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: http://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
To remove all entries in evlist->pollfd[] that have revents matching at
least one of the bits in the specified mask.
It'll adjust evlist->nr_fds to the number of unfiltered fds and will
return this value, as a convenience and to avoid requiring direct access
to internal state of perf_evlist objects.
This will be used after polling the evlist fds so that we remove fds
that were closed by the kernel.
Acked-by: Jiri Olsa <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Don Zickus <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mike Galbraith <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: http://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
All builtins that consume events from perf's ring buffer now end up
calling perf_evlist__mmap_consume(), which will allow unmapping the ring
buffer when all the fds gets closed and all events in the buffer
consumed.
This is in preparation for the patchkit that will notice POLLHUP on
perf events file descriptors.
Cc: Adrian Hunter <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Don Zickus <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mike Galbraith <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: http://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Do not use dwfl_module_addrsym if dwarf_diename can find the symbol
name, since dwfl_module_addrsym can be failed on shared libraries.
Without this patch
----
$ perf probe -x ../lib/traceevent/libtraceevent.so -V create_arg_op
Failed to find symbol at 0x11df1
Failed to find the address of create_arg_op
Error: Failed to show vars.
----
With this patch
----
$ perf probe -x ../lib/traceevent/libtraceevent.so -V create_arg_op
Available variables at create_arg_op
@<create_arg_op+0>
enum filter_op_type btype
struct filter_arg* arg
----
This bug was reported on [email protected].
Reported-by: david lerner <[email protected]>
Signed-off-by: Masami Hiramatsu <[email protected]>
Cc: david lerner <[email protected]>
Cc: [email protected]
Cc: [email protected]
Link: http://permalink.gmane.org/gmane.linux.kernel.perf.user/1691
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Do not access kallsyms to show available variables and show source lines
in user binaries.
This behavior always requires the root privilege when sysctl sets
kernel.kptr_restrict=1, but we don't need it just for analyzing user
binaries.
Without this patch (by normal user, kptr_restrict=1):
----
$ perf probe -x ./perf -V add_cmdname
Failed to init vmlinux path.
Error: Failed to show vars.
$ perf probe -x ./perf -L add_cmdname
Failed to init vmlinux path.
Error: Failed to show lines.
----
With this patch:
----
$ perf probe -x ./perf -V add_cmdname
Available variables at add_cmdname
@<perf_unknown_cmd_config+144>
(No matched variables)
@<list_commands_in_dir+160>
(No matched variables)
@<add_cmdname+0>
char* name
size_t len
struct cmdnames* cmds
$ perf probe -x ./perf -L add_cmdname
<add_cmdname@/home/fedora/ksrc/linux-3/tools/perf/util/help.c:0>
0 void add_cmdname(struct cmdnames *cmds, const char *name, size_t len)
1 {
2 struct cmdname *ent = malloc(sizeof(*ent) + len + 1);
4 ent->len = len;
5 memcpy(ent->name, name, len);
6 ent->name[len] = 0;
...
----
Signed-off-by: Masami Hiramatsu <[email protected]>
Cc: david lerner <[email protected]>
Cc: [email protected]
Cc: [email protected]
Link: http://lkml.kernel.org/r/[email protected]
[ Added missing 'bool user' argument to the !DWARF show_line_range() stub ]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Ubuntu places the kernel debuginfo in /usr/lib/debug/boot/vmlinux-*
Signed-off-by: Anton Blanchard <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
echo Link: http://lkml.kernel.org/n/tip-`ranpwd -l 24`@git.kernel.org
Link: http://lkml.kernel.org/r/20140909091152.2698c0f7@kryten
[ Adapted it to use the perf.data file kernel version as in 0a7e6d1b6844 ]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
If a vmlinux is stripped, perf will use it and ignore kallsyms. We
end up with useless profiles where everything maps to a few
runtime symbols:
63.39% swapper [kernel.kallsyms] [k] hcall_real_table
4.90% beam.smp [kernel.kallsyms] [k] hcall_real_table
4.44% beam.smp [kernel.kallsyms] [k] __sched_text_start
3.72% beam.smp [kernel.kallsyms] [k] __run_at_kexec
Detect this case and fallback to using kallsyms. This fixes the issue:
62.81% swapper [kernel.kallsyms] [k] snooze_loop
4.44% beam.smp [kernel.kallsyms] [k] __schedule
0.91% beam.smp [kernel.kallsyms] [k] _switch
0.73% beam.smp [kernel.kallsyms] [k] put_prev_entity
Signed-off-by: Anton Blanchard <[email protected]>
Acked-by: Namhyung Kim <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/20140909085929.4a5a81f0@kryten
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
_BSD_SOURCE was deprecated in favour of _DEFAULT_SOURCE since glibc
2.20[1]. To avoid build warning on glibc2.20, _DEFAULT_SOURCE should
also be defined.
[1]: https://sourceware.org/glibc/wiki/Release/2.20
Signed-off-by: Chanho Park <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Include poll.h instead.
Fixes the following warning in systems with musl's libc:
/usr/include/sys/poll.h:1:2: warning: #warning redirecting incorrect #include
<sys/poll.h> to <poll.h> [-Wcpp]
Reported-by: John Spencer <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Don Zickus <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mike Galbraith <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: http://thread.gmane.org/gmane.linux.kernel.perf.user/1687/focus=1690
Link: http://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
This makes it work with non-GNU grep's as well.
Signed-off-by: John Spencer <[email protected]>
Acked-by: Namhyung Kim <[email protected]>
Link: http://thread.gmane.org/gmane.linux.kernel.perf.user/1686
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Some Linux symbols (for example __vt_event_wait) are interpreted by the
demangler as C++ mangled names, which of course they aren't.
Disable kernel symbol demangling by default to avoid this, and allow
enabling it with a new option --demangle-kernel for those who wish it.
Reported-by: Jiri Olsa <[email protected]>
Signed-off-by: Avi Kivity <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Cc: Jiri Olsa <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
This patch fixes ARM compile of the perf tool. The debug.h header file
was missing from a couple of unwind related modules.
Signed-off-by: Stephane Eranian <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/20140905042103.GA3091@quad
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Add a function to scan a sysfs file within the pmu device directory.
This will be used to read capability values from the PMU 'caps'
subdirectory.
Signed-off-by: Adrian Hunter <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
This allows default config terms to be provided for a PMU. So, for
example, when the Intel PT PMU is added, it will be possible to specify:
intel_pt//
which will be the same as:
intel_pt/tsc=1,noretcomp=0/
meaning that the trace should contain TSC timestamps and perform 'return
compression'.
An important consideration of this patch is that it must be possible to
overwrite the default values. That has meant changing the logic so that
a zero value can replace a non-zero value.
Signed-off-by: Adrian Hunter <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Decoding an Intel PT trace of the kernel requires an accurate kernel
object image. This is provided by making a copy of kcore. However the
copy needs to be made under the same conditions as the original
recording, and then it needs to be associated with the perf.data file.
The perf-with-kcore script does that.
The script also checks the permissions on the buildid cache and can be
used to fix them. That is needed for distributions where root does not
have a home directory and consequently writes to the same buildid cache
as the user, resulting in cached files that the user does not have
access to.
Example:
$ ./perf-with-kcore
Usage: perf-with-kcore <perf sub-command> <perf.data directory> [<sub-command options> [ -- <workload>]]
<perf sub-command> can be record, script, report or inject
or: perf-with-kcore fix_buildid_cache_permissions
$ ./perf-with-kcore record pt_uname -e intel_pt// -- uname
Recording
Using /home/ahunter/bin/perf
perf version 3.15.rc3.g4549ba
/home/ahunter/bin/perf record -o pt_uname/perf.data -e intel_pt// -- uname
Linux
[ perf record: Woken up 3 times to write data ]
[ perf record: Captured and wrote 0.023 MB pt_uname/perf.data ]
Copying kcore
[sudo] password for ahunter:
Done
$ tools/perf/perf-with-kcore.sh script pt_uname | head
Using /home/ahunter/bin/perf
perf version 3.15.rc3.g4549ba
/home/ahunter/bin/perf script -i pt_uname/perf.data --kallsyms=pt_uname/kcore_dir/kallsyms
swapper 0 [002] 161533.969666: sched:sched_switch: swapper/2:0 [120] R ==> perf:11316 [120]
:11315 11315 [003] 161533.969704: sched:sched_switch: perf:11315 [120] S ==> swapper/3:0 [120]
:11316 11316 [002] 161533.969783: sched:sched_switch: perf:11316 [120] R ==> migration/2:33 [0]
:33 33 [002] 161533.969791: sched:sched_switch: migration/2:33 [0] S ==> swapper/2:0 [120]
swapper 0 [003] 161533.969792: sched:sched_switch: swapper/3:0 [120] R ==> perf:11316 [120]
:11316 11316 [003] 161533.970062: branches: 0 [unknown] ([unknown]) => ffffffff810532fa native_write_msr_safe ([kernel.kallsyms])
:11316 11316 [003] 161533.970062: branches: ffffffff810532fd native_write_msr_safe ([kernel.kallsyms]) => ffffffff81035b31 pt_config_start ([kernel.kallsyms])
Signed-off-by: Adrian Hunter <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
This enables a PMU event to be specified in the form:
pmu//
which is effectively the same as:
pmu/config=0/
This patch is a precursor to defining default config for a PMU.
Further explanation extracted from lkml thread:
Imagine that the 'tsc' term did not exist.
Intel PT trace data would not contain TSC packets, and the decoder would
not know how to decode them.
Then imagine that a new version of the hardware adds 'tsc'.
It is such a useful feature that we want it by default, but older
versions of the tools don't know how to decode it, so the kernel cannot
turn it on by default.
It is similar to why the kernel does not select perf_event_attr.mmap2 by
default.
The kernel doesn't know whether the tool supports it.
Signed-off-by: Adrian Hunter <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
We need a way to specify $(lib) part of the installation path for
traceevent plugin libraries. Currently we use 'lib64' for x86_64 and
'lib' otherwise.
Instead of listing all possible values, this change allows the rpm spec
code to specify the correct $(lib) part based on processed architecture,
like
$ make ... lib=%{_lib}
Signed-off-by: Jiri Olsa <[email protected]>
Tested-by: Kyle McMartin <[email protected]>
Cc: Corey Ashford <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Kyle McMartin <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The 'live' command prints additional information to the "Analyze events
for " title bar about the current target. Let's print the same title
for the 'report' command.
Signed-off-by: Alexander Yarygin <[email protected]>
Acked-by: David Ahern <[email protected]>
Cc: Christian Borntraeger <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The 'perf kvm stat report' command can be used to analyze events either
for system wide or for specific pids.
Let's enable kvm->opts.target.system_wide flag when 'report' command is
running for system-wide analyzing. This helps to sync kvm->opts.target
values in 'report' and 'live' commands.
Signed-off-by: Alexander Yarygin <[email protected]>
Acked-by: David Ahern <[email protected]>
Cc: Christian Borntraeger <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The 'perf kvm stat report' command uses the kvm->pid_str field to keep
the value of the --pid option. Let's use kvm->opts.target.pid instead.
Signed-off-by: Alexander Yarygin <[email protected]>
Acked-by: David Ahern <[email protected]>
Cc: Christian Borntraeger <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The powerpc skip callchain code uses DWARF, so we must disable it if
DWARF is disabled.
Signed-off-by: Anton Blanchard <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Michael Ellerman <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Sukadev Bhattiprolu <[email protected]>
Link: http://lkml.kernel.org/r/20140825182506.2be6512d@kryten
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Adding support to add field(s) to default sort order via using the '+'
prefix, like for report:
$ perf report
Samples: 2K of event 'cycles', Event count (approx.): 882172583
Overhead Command Shared Object Symbol
7.39% swapper [kernel.kallsyms] [k] intel_idle
1.97% firefox libpthread-2.17.so [.] pthread_mutex_lock
1.39% firefox [snd_hda_intel] [k] azx_get_position
1.11% firefox libpthread-2.17.so [.] pthread_mutex_unlock
$ perf report -s +cpu
Samples: 2K of event 'cycles', Event count (approx.): 882172583
Overhead Command Shared Object Symbol CPU
2.89% swapper [kernel.kallsyms] [k] intel_idle 000
2.61% swapper [kernel.kallsyms] [k] intel_idle 002
1.20% swapper [kernel.kallsyms] [k] intel_idle 001
0.82% firefox libpthread-2.17.so [.] pthread_mutex_lock 002
Works in general for commands using --sort option.
v2 with changes suggested:
- Use dynamic memory instead static buffer
- Fix error message typo
Signed-off-by: Jiri Olsa <[email protected]>
Acked-by: Namhyung Kim <[email protected]>
Cc: Corey Ashford <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jean Pihet <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Currently there're two callchain print functions in TUI - one for the
hists browser and another for file dump. They do almost same job so
it'd be better consolidate the codes.
To do that, provide two callbacks to the generic logic - one for
printing and another for checking whether it should stop.
Signed-off-by: Namhyung Kim <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Adding support to add field(s) to default field order via using the '+'
prefix, like for report:
$ perf report
Samples: 10 of event 'cycles', Event count (approx.): 4463799
Overhead Command Shared Object Symbol
32.40% ls [kernel.kallsyms] [k] filemap_fault
28.19% ls [kernel.kallsyms] [k] get_page_from_freelist
23.38% ls [kernel.kallsyms] [k] enqueue_entity
15.04% ls [kernel.kallsyms] [k] mmap_region
$ perf report -F +period,sample
Samples: 10 of event 'cycles', Event count (approx.): 4463799
Overhead Period Samples Command Shared Object Symbol
32.40% 1446493 1 ls [kernel.kallsyms] [k] filemap_fault
28.19% 1258486 1 ls [kernel.kallsyms] [k] get_page_from_freelist
23.38% 1043754 1 ls [kernel.kallsyms] [k] enqueue_entity
15.04% 671160 1 ls [kernel.kallsyms] [k] mmap_region
Works in general for commands using --field option.
Signed-off-by: Jiri Olsa <[email protected]>
Cc: Corey Ashford <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jean Pihet <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Signed-off-by: Jiri Olsa <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Corey Ashford <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jean Pihet <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/n/[email protected]
[ Yanked this out of a patch containing this and some other change ]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|