aboutsummaryrefslogtreecommitdiff
path: root/tools/perf/util
AgeCommit message (Collapse)AuthorFilesLines
2016-10-17perf jevents: Handle events including .c and .oWang Nan1-2/+2
This patch helps with Sukadev's vendor event tree where such events can happen. >From Andi Kleen: Any event including a .c/.o/.bpf currently triggers BPF compilation or loading and then an error. This can happen for some Intel vendor events, which cannot be used. This patch fixes this problem by forbidding BPF file patch containing '{', '}' and ',', make sure flex consumes the leading '{', instead of matching it using a BPF file path. Tested result: $ perf stat -e '{unc_p_clockticks,unc_p_power_state_occupancy.cores_c0}' -a -I 1000 invalid or unsupported event: '{unc_p_clockticks,unc_p_power_state_occupancy.cores_c0}' Run 'perf list' for a list of valid events (as expected, interperted as event) $ perf stat -e 'aaa.c' -a -I 1000 ERROR: problems with path aaa.c: No such file or directory (as expected, interpreted as BPF source) $ perf stat -e 'aaa.ccc' -a -I 1000 invalid or unsupported event: 'aaa.ccc' (as expected, interpreted as event) $ perf stat -e '{aaa.c}' -a -I 1000 ERROR: problems with path aaa.c: No such file or directory event syntax error: '{aaa.c}' <SKIP> (as expected, interpreted as BPF source) $ perf stat -e '{cycles,aaa.c}' -a -I 1000 ERROR: problems with path aaa.c: No such file or directory event syntax error: '{cycles,aaa.c}' (as expected, interpreted as BPF source) Signed-off-by: Wang Nan <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Reported-by: Andi Kleen <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Sukadev Bhattiprolu <[email protected]> Cc: Zefan Li <[email protected]> Cc: [email protected] Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2016-10-13perf header: Set nr_numa_nodes only when we parsed all the dataJiri Olsa1-1/+1
Sukadev reported segfault on releasing perf env's numa data. It's due to nr_numa_nodes being set no matter if the numa data gets parsed properly. The perf_env__exit crash the on releasing non existed data. Setting nr_numa_nodes only when data are parsed out properly. Signed-off-by: Jiri Olsa <[email protected]> Reported-by: Sukadev Bhattiprolu <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: David Ahern <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Wang Nan <[email protected]> Link: http://lkml.kernel.org/n/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2016-10-05perf intel-pt: Fix MTC timestamp calculation for large MTC periodsAdrian Hunter1-0/+36
The MTC packet provides a 8-bit slice of CTC which is related to TSC by the TMA packet, however the TMA packet only provides the lower 16 bits of CTC. If mtc_shift > 8 then some of the MTC bits are not in the CTC provided by the TMA packet. Fix-up the last_mtc calculated from the TMA packet by copying the missing bits from the current MTC assuming the least difference between the two, and that the current MTC comes after last_mtc. Signed-off-by: Adrian Hunter <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: [email protected] # v4.3+ Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2016-10-05perf intel-pt: Fix estimated timestamps for cycle-accurate modeAdrian Hunter1-0/+2
In cycle-accurate mode, timestamps can be calculated from CYC packets. The decoder also estimates timestamps based on the number of instructions since the last timestamp. For that to work in cycle-accurate mode, the instruction count needs to be reset to zero when a timestamp is calculated from a CYC packet, but that wasn't happening, so fix it. Signed-off-by: Adrian Hunter <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: [email protected] # v4.3+ Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2016-10-03perf tools: Make alias matching case-insensitiveAndi Kleen1-1/+1
Make alias matching the events parser case-insensitive. This is useful with the JSON events. perf uses lower case events, but the CPU manuals generally use upper case event names. The JSON files use lower case by default too. But if we search case insensitively then users can cut-n-paste the upper case event names. So the following works: % perf stat -e BR_INST_EXEC.TAKEN_INDIRECT_NEAR_CALL true Performance counter stats for 'true': 305 BR_INST_EXEC.TAKEN_INDIRECT_NEAR_CALL 0.000492799 seconds time elapsed Signed-off-by: Andi Kleen <[email protected]> Acked-by: Ingo Molnar <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Cc: Madhavan Srinivasan <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: [email protected] Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2016-10-03perf tools: Allow period= in perf stat CPU event descriptions.Sukadev Bhattiprolu1-0/+1
This avoids the JSON PMU events parser having to know whether its aliases are for perf stat or perf record. Signed-off-by: Andi Kleen <[email protected]> Signed-off-by: Sukadev Bhattiprolu <[email protected]> Acked-by: Ingo Molnar <[email protected]> Cc: Madhavan Srinivasan <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: [email protected] Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2016-10-03perf list jevents: Add support for event list topicsAndi Kleen2-10/+28
Add support to group the output of perf list by the Topic field in the JSON file. Example output: % perf list ... Cache: l1d.replacement [L1D data line replacements] l1d_pend_miss.pending [L1D miss oustandings duration in cycles] l1d_pend_miss.pending_cycles [Cycles with L1D load Misses outstanding] l2_l1d_wb_rqsts.all [Not rejected writebacks from L1D to L2 cache lines in any state] l2_l1d_wb_rqsts.hit_e [Not rejected writebacks from L1D to L2 cache lines in E state] l2_l1d_wb_rqsts.hit_m [Not rejected writebacks from L1D to L2 cache lines in M state] ... Pipeline: arith.fpu_div [Divide operations executed] arith.fpu_div_active [Cycles when divider is busy executing divide operations] baclears.any [Counts the total number when the front end is resteered, mainly when the BPU cannot provide a correct prediction and this is corrected by other branch handling mechanisms at the front end] br_inst_exec.all_branches [Speculative and retired branches] br_inst_exec.all_conditional [Speculative and retired macro-conditional branches] br_inst_exec.all_direct_jmp [Speculative and retired macro-unconditional branches excluding calls and indirects] br_inst_exec.all_direct_near_call [Speculative and retired direct near calls] br_inst_exec.all_indirect_jump_non_call_ret Signed-off-by: Andi Kleen <[email protected]> Signed-off-by: Sukadev Bhattiprolu <[email protected]> Acked-by: Ingo Molnar <[email protected]> Acked-by: Jiri Olsa <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Cc: Madhavan Srinivasan <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: [email protected] Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2016-10-03perf list: Support long jevents descriptionsSukadev Bhattiprolu4-9/+18
Previously we were dropping the useful longer descriptions that some events have in the event list completely. This patch makes them appear with perf list. Old perf list: baclears: baclears.all [Counts the number of baclears] vs new: perf list -v: ... baclears: baclears.all [The BACLEARS event counts the number of times the front end is resteered, mainly when the Branch Prediction Unit cannot provide a correct prediction and this is corrected by the Branch Address Calculator at the front end. The BACLEARS.ANY event counts the number of baclears for any type of branch] Signed-off-by: Andi Kleen <[email protected]> Signed-off-by: Sukadev Bhattiprolu <[email protected]> Acked-by: Ingo Molnar <[email protected]> Acked-by: Jiri Olsa <[email protected]> Cc: Madhavan Srinivasan <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: [email protected] Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2016-10-03perf pmu: Add override support for event list CPUIDAndi Kleen1-1/+7
Add a PERF_CPUID variable to override the CPUID of the current CPU (within the current architecture). This is useful for testing, so that all event lists can be tested on a single system. Signed-off-by: Andi Kleen <[email protected]> Signed-off-by: Sukadev Bhattiprolu <[email protected]> Acked-by: Ingo Molnar <[email protected]> Acked-by: Jiri Olsa <[email protected]> Cc: Madhavan Srinivasan <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: [email protected] Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2016-10-03perf list: Add a --no-desc flagAndi Kleen4-6/+6
Add a --no-desc flag to 'perf list' to not print the event descriptions that were earlier added for JSON events. This may be useful to get a less crowded listing. It's still default to print descriptions as that is the more useful default for most users. Signed-off-by: Andi Kleen <[email protected]> Signed-off-by: Sukadev Bhattiprolu <[email protected]> Acked-by: Ingo Molnar <[email protected]> Acked-by: Jiri Olsa <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Cc: [email protected] Cc: Madhavan Srinivasan <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2016-10-03perf tools: Query terminal width and use in perf listAndi Kleen1-1/+2
Automatically adapt the now wider and word wrapped perf list output to wider terminals. This requires querying the terminal before the auto pager takes over, and exporting this information from the pager subsystem. Signed-off-by: Andi Kleen <[email protected]> Signed-off-by: Sukadev Bhattiprolu <[email protected]> Acked-by: Ingo Molnar <[email protected]> Acked-by: Jiri Olsa <[email protected]> Acked-by: Namhyung Kim <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Cc: Madhavan Srinivasan <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: [email protected] Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2016-10-03perf pmu: Support alias descriptionsAndi Kleen2-16/+68
Add support to print alias descriptions in perf list, which are taken from the generated event files. The sorting code is changed to put the events with descriptions at the end. The descriptions are printed as possibly multiple word wrapped lines. Example output: % perf list ... arith.fpu_div [Divide operations executed] arith.fpu_div_active [Cycles when divider is busy executing divide operations] Committer notes: Further testing on a Broadwell machine (ThinkPad t450s), using these files: $ find tools/perf/pmu-events/arch/x86/ tools/perf/pmu-events/arch/x86/ tools/perf/pmu-events/arch/x86/Broadwell tools/perf/pmu-events/arch/x86/Broadwell/Cache.json tools/perf/pmu-events/arch/x86/Broadwell/Other.json tools/perf/pmu-events/arch/x86/Broadwell/Frontend.json tools/perf/pmu-events/arch/x86/Broadwell/Virtual-Memory.json tools/perf/pmu-events/arch/x86/Broadwell/Pipeline.json tools/perf/pmu-events/arch/x86/Broadwell/Floating-point.json tools/perf/pmu-events/arch/x86/Broadwell/Memory.json tools/perf/pmu-events/arch/x86/mapfile.csv $ Taken from: https://github.com/sukadev/linux/tree/json-code+data-v21/tools/perf/pmu-events/arch/x86/ to get this machinery to actually parse JSON files, generate $(OUTPUT)pmu-events/pmu-events.c, compile it and link it with perf, that will then use the table it contains, these files will be submitted right after this patchkit. [acme@jouet linux]$ perf list page_walker List of pre-defined events (to be used in -e): page_walker_loads.dtlb_l1 [Number of DTLB page walker hits in the L1+FB] page_walker_loads.dtlb_l2 [Number of DTLB page walker hits in the L2] page_walker_loads.dtlb_l3 [Number of DTLB page walker hits in the L3 + XSNP] page_walker_loads.dtlb_memory [Number of DTLB page walker hits in Memory] page_walker_loads.itlb_l1 [Number of ITLB page walker hits in the L1+FB] page_walker_loads.itlb_l2 [Number of ITLB page walker hits in the L2] page_walker_loads.itlb_l3 [Number of ITLB page walker hits in the L3 + XSNP] [acme@jouet linux]$ Signed-off-by: Andi Kleen <[email protected]> Signed-off-by: Sukadev Bhattiprolu <[email protected]> Acked-by: Ingo Molnar <[email protected]> Acked-by: Jiri Olsa <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Cc: Madhavan Srinivasan <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: [email protected] Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2016-10-03perf pmu: Use pmu_events table to create aliasesSukadev Bhattiprolu2-0/+61
At run time (when 'perf' is starting up), locate the specific table of PMU events that corresponds to the current CPU. Using that table, create aliases for the each of the PMU events in the CPU. The use these aliases to parse the user specified perf event. In short this would allow the user to specify events using their aliases rather than raw event codes. Based on input and some earlier patches from Andi Kleen, Jiri Olsa. Signed-off-by: Sukadev Bhattiprolu <[email protected]> Acked-by: Ingo Molnar <[email protected]> Acked-by: Jiri Olsa <[email protected]> Cc: Madhavan Srinivasan <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: [email protected] Link: http://lkml.kernel.org/r/[email protected] [ Make pmu_add_cpu_aliases() return void, since it was returning just '0' and furthermore, even that was being discarded via an explicit (void) cast ] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2016-10-03perf tools: Experiment with cppcheckArnaldo Carvalho de Melo5-20/+13
Experimenting a bit using cppcheck[1], a static checker brought to my attention by Colin, reducing the scope of some variables, reducing the line of source code lines in the process: $ cppcheck --enable=style tools/perf/util/thread.c Checking tools/perf/util/thread.c... [tools/perf/util/thread.c:17]: (style) The scope of the variable 'leader' can be reduced. [tools/perf/util/thread.c:133]: (style) The scope of the variable 'err' can be reduced. [tools/perf/util/thread.c:273]: (style) The scope of the variable 'err' can be reduced. Will continue later, but these are already useful, keep them. 1: https://sourceforge.net/p/cppcheck/wiki/Home/ Cc: Adrian Hunter <[email protected]> Cc: Colin Ian King <[email protected]> Cc: David Ahern <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Wang Nan <[email protected]> Link: http://lkml.kernel.org/n/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2016-10-03perf probe: Check if *ptr2 is zero and not ptr2Colin Ian King1-1/+1
Static anaylsis with cppcheck[1] detected an incorrect comparison: [tools/perf/util/probe-event.c:216]: (warning) Char literal compared with pointer 'ptr2'. Did you intend to dereference it? Dereference ptr2 for the comparison to fix this. 1: https://sourceforge.net/p/cppcheck/wiki/Home/ Signed-off-by: Colin King <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Masami Hiramatsu <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Ravi Bangoria <[email protected]> Cc: Wang Nan <[email protected]> Fixes: 35726d3a4ca9 ("perf probe: Fix to cut off incompatible chars from group name") Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2016-09-29perf probe: Match linkage name with mangled nameMasami Hiramatsu2-2/+29
Match linkage name with mangled name if exists. The linkage_name is used for storing mangled name of the object. Thus, this allows 'perf probe' to find appropriate probe point from mangled symbol as below. E.g. without this fix: ---- $ perf probe -x /usr/lib64/libstdc++.so.6 \ -D _ZNKSt15basic_fstreamXXIwSt11char_traitsIwEE7is_openEv Probe point '_ZNKSt15basic_fstreamXXIwSt11char_traitsIwEE7is_openEv' not found. Error: Failed to add events. ---- With this fix, perf probe can find the correct one. ---- $ perf probe -x /usr/lib64/libstdc++.so.6 \ -D _ZNKSt15basic_fstreamXXIwSt11char_traitsIwEE7is_openEv p:probe_libstdc/_ZNKSt15basic_fstreamXXIwSt11char_traitsIwEE7is_openEv /usr/lib64/libstdc++.so.6.0.22:0x8ca60 ---- Committer notes: After the fix, setting it for real (no -D/--definition, that amounts to a --dry-run): # perf probe -x /usr/lib64/libstdc++.so.6 _ZNKSt15basic_fstreamXXIwSt11char_traitsIwEE7is_openEv Added new event: probe_libstdc:_ZNKSt15basic_fstreamXXIwSt11char_traitsIwEE7is_openEv (on _ZNKSt15basic_fstreamXXIwSt11char_traitsIwEE7is_openEv in /usr/lib64/libstdc++.so.6.0.22) You can now use it in all perf tools, such as: perf record -e probe_libstdc:_ZNKSt15basic_fstreamXXIwSt11char_traitsIwEE7is_openEv -aR sleep 1 # perf probe -l probe_libstdc:* probe_libstdc:_ZNKSt15basic_fstreamXXIwSt11char_traitsIwEE7is_openEv (on is_open@libstdc++-v3/include/fstream in /usr/lib64/libstdc++.so.6.0.22) # Reported-by: Thomas Gleixner <[email protected]> Signed-off-by: Masami Hiramatsu <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Tested-by: Jiri Olsa <[email protected]> Cc: David Ahern <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: http://lkml.kernel.org/r/147464493162.29804.16715053505069382443.stgit@devbox Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2016-09-29perf probe: Fix to cut off incompatible chars from group nameMasami Hiramatsu1-3/+7
Cut off the characters which can not use for group name of uprobes when making it based on executable filename. For example, if the exec name is libstdc++.so, without this fix perf probe generates "probe_libstdc++" as the group name, but it is failed to set because '+' can not be used for group name. With this fix perf accepts only alphabet, number or '_' for group name, thus perf generates "probe_libstdc" as the group name. E.g. with this fix, you can see the event name has no "+". ---- $ ./perf probe -x /usr/lib64/libstdc++.so.6 -D is_open p:probe_libstdc/is_open /usr/lib64/libstdc++.so.6.0.22:0x8ca80 p:probe_libstdc/is_open_1 /usr/lib64/libstdc++.so.6.0.22:0x8ca70 p:probe_libstdc/is_open_2 /usr/lib64/libstdc++.so.6.0.22:0x8ca60 p:probe_libstdc/is_open_3 /usr/lib64/libstdc++.so.6.0.22:0xb0ad0 p:probe_libstdc/is_open_4 /usr/lib64/libstdc++.so.6.0.22:0xecca9 ---- Committer note: Before this fix: # perf probe -x /usr/lib64/libstdc++.so.6 is_open Failed to write event: Invalid argument Error: Failed to add events. # After the fix: # perf probe -x /usr/lib64/libstdc++.so.6 is_open Added new events: probe_libstdc:is_open (on is_open in /usr/lib64/libstdc++.so.6.0.22) probe_libstdc:is_open_1 (on is_open in /usr/lib64/libstdc++.so.6.0.22) probe_libstdc:is_open_2 (on is_open in /usr/lib64/libstdc++.so.6.0.22) probe_libstdc:is_open_3 (on is_open in /usr/lib64/libstdc++.so.6.0.22) probe_libstdc:is_open_4 (on is_open in /usr/lib64/libstdc++.so.6.0.22) You can now use it in all perf tools, such as: perf record -e probe_libstdc:is_open_4 -aR sleep 1 # perf probe -l probe_libstdc:* probe_libstdc:is_open (on is_open@libstdc++-v3/include/fstream in /usr/lib64/libstdc++.so.6.0.22) probe_libstdc:is_open_1 (on is_open@libstdc++-v3/include/fstream in /usr/lib64/libstdc++.so.6.0.22) probe_libstdc:is_open_2 (on is_open@libstdc++-v3/include/fstream in /usr/lib64/libstdc++.so.6.0.22) probe_libstdc:is_open_3 (on is_open@src/c++98/basic_file.cc in /usr/lib64/libstdc++.so.6.0.22) probe_libstdc:is_open_4 (on stdio_filebuf:5@include/ext/stdio_filebuf.h in /usr/lib64/libstdc++.so.6.0.22) # Signed-off-by: Masami Hiramatsu <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Tested-by: Jiri Olsa <[email protected]> Cc: David Ahern <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Thomas Gleixner <[email protected]> Link: http://lkml.kernel.org/r/147464491667.29804.9553638175441827970.stgit@devbox Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2016-09-29perf probe: Skip if the function address is 0Masami Hiramatsu1-1/+11
Skip probes if the entry address of the target function is 0. This can happen when we're handling C++ debuginfo files. E.g. without this fix, below case still fail. ---- $ ./perf probe -x /usr/lib64/libstdc++.so.6 -vD is_open probe-definition(0): is_open symbol:is_open file:(null) line:0 offset:0 return:0 lazy:(null) 0 arguments symbol:catch file:(null) line:0 offset:0 return:0 lazy:(null) symbol:throw file:(null) line:0 offset:0 return:0 lazy:(null) symbol:rethrow file:(null) line:0 offset:0 return:0 lazy:(null) Open Debuginfo file: /usr/lib/debug/usr/lib64/libstdc++.so.6.0.22.debug Try to find probe point from debuginfo. Matched function: is_open [295df] found inline addr: 0x8ca80 Probe point found: is_open+0 found inline addr: 0x8ca70 Probe point found: is_open+0 found inline addr: 0x8ca60 Probe point found: is_open+0 Matched function: is_open [6527f] Matched function: is_open [9fe8a] Probe point found: is_open+0 Matched function: is_open [19710b] found inline addr: 0xecca9 Probe point found: stdio_filebuf+57 found inline addr: 0x0 Probe point found: swap+0 Matched function: is_open [19fc9d] Probe point found: is_open+0 Found 7 probe_trace_events. p:probe_libstdc++/is_open /usr/lib64/libstdc++.so.6.0.22:0x8ca80 p:probe_libstdc++/is_open_1 /usr/lib64/libstdc++.so.6.0.22:0x8ca70 p:probe_libstdc++/is_open_2 /usr/lib64/libstdc++.so.6.0.22:0x8ca60 p:probe_libstdc++/is_open_3 /usr/lib64/libstdc++.so.6.0.22:0xb0ad0 p:probe_libstdc++/is_open_4 /usr/lib64/libstdc++.so.6.0.22:0xecca9 Failed to synthesize probe trace event. Error: Failed to add events. Reason: Invalid argument (Code: -22) ---- This is because some instances have entry_pc == 0 (see 19710b and 19fc9d). With this fix, those are skipped. ---- $ ./perf probe -x /usr/lib64/libstdc++.so.6 -D is_open p:probe_libstdc++/is_open /usr/lib64/libstdc++.so.6.0.22:0x8ca80 p:probe_libstdc++/is_open_1 /usr/lib64/libstdc++.so.6.0.22:0x8ca70 p:probe_libstdc++/is_open_2 /usr/lib64/libstdc++.so.6.0.22:0x8ca60 p:probe_libstdc++/is_open_3 /usr/lib64/libstdc++.so.6.0.22:0xb0ad0 p:probe_libstdc++/is_open_4 /usr/lib64/libstdc++.so.6.0.22:0xecca9 ---- Signed-off-by: Masami Hiramatsu <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Tested-by: Jiri Olsa <[email protected]> Cc: David Ahern <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Thomas Gleixner <[email protected]> Link: http://lkml.kernel.org/r/147464490707.29804.14277897643725143867.stgit@devbox Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2016-09-29perf probe: Ignore the error of finding inline instanceMasami Hiramatsu1-2/+3
Ignore the error when the perf probe failed to find inline function instances. This can happen when we search a method in C++ debuginfo. If there is completely no instance in target, perf probe can return an error. E.g. without this fix: ---- $ perf probe -x /usr/lib64/libstdc++.so.6 -vD showmanyc probe-definition(0): showmanyc symbol:showmanyc file:(null) line:0 offset:0 return:0 lazy:(null) 0 arguments symbol:catch file:(null) line:0 offset:0 return:0 lazy:(null) symbol:throw file:(null) line:0 offset:0 return:0 lazy:(null) symbol:rethrow file:(null) line:0 offset:0 return:0 lazy:(null) Open Debuginfo file: /usr/lib/debug/usr/lib64/libstdc++.so.6.0.22.debug Try to find probe point from debuginfo. Matched function: showmanyc An error occurred in debuginfo analysis (-2). Trying to use symbols. Failed to find symbol showmanyc in /usr/lib64/libstdc++.so.6.0.22 Error: Failed to add events. Reason: No such file or directory (Code: -2) ---- This is because one of showmanyc is defined as inline but no instance found. With this fix, it is succeeded to show as below. ---- $ perf probe -x /usr/lib64/libstdc++.so.6 -D showmanyc p:probe_libstdc++/showmanyc /usr/lib64/libstdc++.so.6.0.22:0xb0e50 p:probe_libstdc++/showmanyc_1 /usr/lib64/libstdc++.so.6.0.22:0xc7c40 p:probe_libstdc++/showmanyc_2 /usr/lib64/libstdc++.so.6.0.22:0xecfa0 p:probe_libstdc++/showmanyc_3 /usr/lib64/libstdc++.so.6.0.22:0x115fc0 p:probe_libstdc++/showmanyc_4 /usr/lib64/libstdc++.so.6.0.22:0x121a90 ---- Signed-off-by: Masami Hiramatsu <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Tested-by: Jiri Olsa <[email protected]> Cc: David Ahern <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Thomas Gleixner <[email protected]> Link: http://lkml.kernel.org/r/147464489775.29804.3190419491209875936.stgit@devbox Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2016-09-29perf intel-pt: Fix decoding when there are address filtersAdrian Hunter1-0/+82
Due to errata SKL014 "Intel PT TIP.PGD May Not Have Target IP Payload", the Intel PT decoder needs to match address filters against TIP.PGD packets. Parse the address filters and implement the decoder's 'pgd_ip()' callback to match the IP against the filter regions. Signed-off-by: Adrian Hunter <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Masami Hiramatsu <[email protected]> Cc: Mathieu Poirier <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2016-09-29perf intel-pt: Enable decoder to handle TIP.PGD with missing IPAdrian Hunter2-0/+31
When address filters are used, the decoder must detect the end of a filter region (or a branch into a tracestop region) by matching Packet Generation Disabled (TIP.PGD) packets against the object code using the IP given in the packet. However, due to errata SKL014 "Intel PT TIP.PGD May Not Have Target IP Payload", that IP may not be present. Enable the decoder to handle that by adding a new callback function 'pgd_ip()' which indicates whether the IP is not traced, in which case that is the point where the trace was disabled. Signed-off-by: Adrian Hunter <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Masami Hiramatsu <[email protected]> Cc: Mathieu Poirier <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2016-09-29perf intel-pt: Read address filter from AUXTRACE_INFO eventAdrian Hunter1-0/+51
Read the address filter from the AUXTRACE_INFO event in preparation for using it to assist in decoding. Signed-off-by: Adrian Hunter <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Masami Hiramatsu <[email protected]> Cc: Mathieu Poirier <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2016-09-29perf intel-pt: Record address filter in AUXTRACE_INFO eventAdrian Hunter1-2/+1
The address filter is needed to help decode the trace, so store it in the AUXTRACE_INFO event. Signed-off-by: Adrian Hunter <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Masami Hiramatsu <[email protected]> Cc: Mathieu Poirier <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2016-09-29perf intel-pt: Add a helper function for processing AUXTRACE_INFOAdrian Hunter1-4/+8
Add a helper function 'intel_pt_has()' to make it easier to determine which members the AUXTRACE_INFO event contains. Signed-off-by: Adrian Hunter <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Masami Hiramatsu <[email protected]> Cc: Mathieu Poirier <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2016-09-29perf intel-pt: Fix missing error codes processing auxtrace_infoAdrian Hunter1-0/+2
Fix 2 places where the err variable was not being set. Signed-off-by: Adrian Hunter <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Masami Hiramatsu <[email protected]> Cc: Mathieu Poirier <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2016-09-29perf intel-pt: Add support for recording the max non-turbo ratioAdrian Hunter2-1/+14
Previously the maximum non-turbo ratio was calculated from TSC assuming a 100 MHz multiplier which is correct for current hardware supporting Intel PT. However more recent kernels also now export the value, so use that in preference to the calculated value. Signed-off-by: Adrian Hunter <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Masami Hiramatsu <[email protected]> Cc: Mathieu Poirier <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2016-09-29perf intel-pt: Fix snapshot overlap detection decoder errorsAdrian Hunter1-4/+11
Fix occasional decoder errors decoding trace data collected in snapshot mode. Snapshot mode can take successive snapshots of trace which might overlap. The decoder checks whether there is an overlap but only looks at the current and previous buffer. However buffers that do not contain synchronization (i.e. PSB) packets cannot be decoded or used for overlap checking. That means the decoder actually needs to check overlaps between the current buffer and the previous buffer that contained usable data. Make that change. Signed-off-by: Adrian Hunter <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Masami Hiramatsu <[email protected]> Cc: Mathieu Poirier <[email protected]> Cc: [email protected] # v4.3+ Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2016-09-29perf probe: Increase debug level of SDT debug messagesAdrian Hunter2-3/+3
Two SDT debug messages can occur for every DSO which is too noisy. Consequently, increase debug level of SDT messages. Signed-off-by: Adrian Hunter <[email protected]> Acked-by: Masami Hiramatsu <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Mathieu Poirier <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2016-09-29perf record: Add support for using symbols in address filtersAdrian Hunter2-0/+791
Symbols come from either the DSO or /proc/kallsyms for the kernel. Details of the functionality can be found in Documentation/perf-record.txt. Signed-off-by: Adrian Hunter <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Masami Hiramatsu <[email protected]> Cc: Mathieu Poirier <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2016-09-29perf symbols: Add dso__last_symbol()Adrian Hunter2-0/+16
Add a function to find the last symbol in a DSO. This will be used when parsing address filters to calculate a region that includes the entire DSO. Signed-off-by: Adrian Hunter <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Masami Hiramatsu <[email protected]> Cc: Mathieu Poirier <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2016-09-29perf script: Fix vanished idle symbolsAdrian Hunter1-5/+2
Commit 608c34de0b3d ("perf symbols: Mark if a symbol is idle in the library") causes idle symbols to vanish from perf script output. That is because print functions suppress symbols marked as 'idle'. However, suppression of 'idle' functions is only used by 'perf top' and 'perf top' does not use the print functions. Consequently that functionality can simply be removed from the print functions. Signed-off-by: Adrian Hunter <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Masami Hiramatsu <[email protected]> Cc: Mathieu Poirier <[email protected]> Fixes: 608c34de0b3d ("perf symbols: Mark if a symbol is idle in the library") Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2016-09-29perf evsel: Add support for address filtersMathieu Poirier3-5/+41
This patch makes it possible to use the current filter framework with address filters. That way address filters for HW tracers such as CoreSight and Intel PT can be communicated to the kernel drivers. Signed-off-by: Mathieu Poirier <[email protected]> Acked-by: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: [email protected] Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2016-09-29perf evsel: New tracepoint specific functionMathieu Poirier3-6/+10
Making function perf_evsel__append_filter() static and introducing a new tracepoint specific function to append filters. That way we eliminate redundant code and avoid formatting mistake. Signed-off-by: Mathieu Poirier <[email protected]> Acked-by: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: [email protected] Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2016-09-29perf tools: Make perf_evsel__append_filter() genericMathieu Poirier3-5/+5
By making function perf_evsel__append_filter() take a format rather than an operator it is possible to reuse the code for other purposes (ex. Intel PT and CoreSight) than tracepoints. Signed-off-by: Mathieu Poirier <[email protected]> Acked-by: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: [email protected] Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2016-09-28perf data: Fix building in 32 bit platform with libbabeltraceWang Nan1-1/+1
On ARM32 building it report following error when we build with libbabeltrace: util/data-convert-bt.c: In function 'add_bpf_output_values': util/data-convert-bt.c:440:3: error: format '%lu' expects argument of type 'long unsigned int', but argument 5 has type 'unsigned int' [-Werror=format] cc1: all warnings being treated as errors Fix it by changing %lu to %zu. Signed-off-by: Wang Nan <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Zefan Li <[email protected]> Cc: [email protected] Fixes: 6122d57e9f7c ("perf data: Support converting data from bpf_perf_event_output()") Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2016-09-28perf tools: Fix MMAP event synthesis broken by MAP_HUGETLB changeAdrian Hunter1-1/+2
Patch "perf record: Mark MAP_HUGETLB when synthesizing mmap events") breaks MMAP event synthesis. The executable name comparison will match any name if the length is zero, resulting in all the user space maps becoming anonymous. This is particularly noticeable with system-wide traces. Example: perf record -a sleep 1 perf script --show-mmap-events Committer note: That is not the case when, say, one has a qemu instance and libvirt actually mounts hugetlbfs. To test this I had to first umount it: [root@jouet ~]# mount | grep hugetlbfs hugetlbfs on /dev/hugepages type hugetlbfs (rw,relatime,seclabel) [root@jouet ~]# After unmount it the error fixed by this patch manifests itself: # perf record -a sleep 1 # perf script --show-mmap-events | grep PERF_RECORD_MMAP2 | head -5 systemd 0 [000] 0.000000: PERF_RECORD_MMAP2 1/1: [0x557d47ed8000(0x167000) @ 0 fd:00 3146896 7362875424355726126]: r-xp //anon systemd 0 [000] 0.000000: PERF_RECORD_MMAP2 1/1: [0x7f96c488d000(0x4000) @ 0 fd:00 3153214 7362875424355726126]: r-xp //anon systemd 0 [000] 0.000000: PERF_RECORD_MMAP2 1/1: [0x7f96c4a92000(0x3d000) @ 0 fd:00 3159276 7362875424355726126]: r-xp //anon systemd 0 [000] 0.000000: PERF_RECORD_MMAP2 1/1: [0x7f96c4cd5000(0x15000) @ 0 fd:00 3153725 7362875424355726126]: r-xp //anon systemd 0 [000] 0.000000: PERF_RECORD_MMAP2 1/1: [0x7f96c4eeb000(0x25000) @ 0 fd:00 3153260 7362875424355726126]: r-xp //anon # Fixed version: # perf record -a sleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 1.419 MB perf.data (182 samples) ] # perf script --show-mmap-events | grep PERF_RECORD_MMAP2 | head -5 systemd 0 [000] 0.000000: PERF_RECORD_MMAP2 1/1: [0x557d47ed8000(0x167000) @ 0 fd:00 3146896 7362875424355726126]: r-xp /usr/lib/systemd/systemd systemd 0 [000] 0.000000: PERF_RECORD_MMAP2 1/1: [0x7f96c488d000(0x4000) @ 0 fd:00 3153214 7362875424355726126]: r-xp /usr/lib64/libuuid.so.1.3.0 systemd 0 [000] 0.000000: PERF_RECORD_MMAP2 1/1: [0x7f96c4a92000(0x3d000) @ 0 fd:00 3159276 7362875424355726126]: r-xp /usr/lib64/libblkid.so.1.1.0 systemd 0 [000] 0.000000: PERF_RECORD_MMAP2 1/1: [0x7f96c4cd5000(0x15000) @ 0 fd:00 3153725 7362875424355726126]: r-xp /usr/lib64/libz.so.1.2.8 systemd 0 [000] 0.000000: PERF_RECORD_MMAP2 1/1: [0x7f96c4eeb000(0x25000) @ 0 fd:00 3153260 7362875424355726126]: r-xp /usr/lib64/liblzma.so.5.2.2 [root@jouet ~]# Signed-off-by: Adrian Hunter <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Masami Hiramatsu <[email protected]> Cc: Mathieu Poirier <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2016-09-22perf hists: Make hists__fprintf_headers function globalJiri Olsa1-0/+1
Will be used from external places in the upcoming c2c patch series. Signed-off-by: Jiri Olsa <[email protected]> Cc: Andi Kleen <[email protected]> Cc: David Ahern <[email protected]> Cc: Don Zickus <[email protected]> Cc: Joe Mario <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2016-09-22perf hists: Make __hist_entry__snprintf function globalJiri Olsa1-0/+2
Will be used from external places in the upcoming c2c patch series. Signed-off-by: Jiri Olsa <[email protected]> Cc: Andi Kleen <[email protected]> Cc: David Ahern <[email protected]> Cc: Don Zickus <[email protected]> Cc: Joe Mario <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2016-09-22perf tools: Make several display functions globalJiri Olsa1-0/+2
Will be used from external places in the upcoming c2c patch series. Signed-off-by: Jiri Olsa <[email protected]> Cc: Andi Kleen <[email protected]> Cc: David Ahern <[email protected]> Cc: Don Zickus <[email protected]> Cc: Joe Mario <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2016-09-22perf tools: Make several sorting functions globalJiri Olsa2-3/+9
Will be used from external places in the upcoming c2c patch series. Signed-off-by: Jiri Olsa <[email protected]> Cc: Andi Kleen <[email protected]> Cc: David Ahern <[email protected]> Cc: Don Zickus <[email protected]> Cc: Joe Mario <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2016-09-22perf tools: Make output_field_add and sort_dimension__add globalJiri Olsa2-4/+8
Will be used from external places in the upcoming c2c patch series. Signed-off-by: Jiri Olsa <[email protected]> Cc: Andi Kleen <[email protected]> Cc: David Ahern <[email protected]> Cc: Don Zickus <[email protected]> Cc: Joe Mario <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2016-09-22perf tools: Make reset_dimensions globalJiri Olsa2-1/+2
Will be used from external places in the upcoming c2c patch series. Signed-off-by: Jiri Olsa <[email protected]> Cc: Andi Kleen <[email protected]> Cc: David Ahern <[email protected]> Cc: Don Zickus <[email protected]> Cc: Joe Mario <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2016-09-22perf pmu: Push configuration down to PMU driverMathieu Poirier4-0/+106
This patch adds a PMU callback and the required mechanic so that drivers can process the command line configuration elements found in evsel::config_terms. Signed-off-by: Mathieu Poirier <[email protected]> Acked-by: Jiri Olsa <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: [email protected] Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2016-09-22perf tools: Add coresight etm PMU record capabilitiesMathieu Poirier3-0/+76
Coresight ETMs are IP blocks used to perform HW assisted tracing on a CPU core. This patch introduce the required auxiliary API functions allowing the perf core to interact with a tracer. Signed-off-by: Mathieu Poirier <[email protected]> Acked-by: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: [email protected] Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2016-09-21perf evsel: Remove superfluous initialization of weightJiri Olsa1-2/+0
Removing superfluous initialization of weight, it's already set to 0 via memset. Signed-off-by: Jiri Olsa <[email protected]> Cc: Andi Kleen <[email protected]> Cc: David Ahern <[email protected]> Cc: Don Zickus <[email protected]> Cc: Joe Mario <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2016-09-20perf symbols: Do not open device filesJiri Olsa1-0/+3
The dso__read_binary_type_filename gets the dso's file name to open. We need to check it for regular file before trying to open it, otherwise we might get stuck with device file. Signed-off-by: Jiri Olsa <[email protected]> Cc: Andi Kleen <[email protected]> Cc: David Ahern <[email protected]> Cc: Don Zickus <[email protected]> Cc: Joe Mario <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: http://lkml.kernel.org/r/20160920161245.GA8995@krava Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2016-09-20perf hists: Factor out hists__reset_column_width()Namhyung Kim1-0/+1
The stdio and tui has same code to reset hpp format column width. Factor it out as a new function. Suggested-and-Acked-by: Jiri Olsa <[email protected]> Signed-off-by: Namhyung Kim <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2016-09-20perf annotate: Resolve 'call' operands to function namesArnaldo Carvalho de Melo1-2/+6
Before this patch the '_raw_spin_lock_irqsave' and 'update_rq_clock' operands were appearing just as hexadecimal numbers: update_blocked_averages /proc/kcore │ push %r12 │ push %rbx │ and $0xfffffffffffffff0,%rsp │ sub $0x40,%rsp │ add -0x662cac00(,%rdi,8),%rax │ mov %rax,%rbx │ mov %rax,%rdi │ mov %rax,0x38(%rsp) │ → callq _raw_spin_lock_irqsave │ mov %rbx,%rdi │ mov %rax,0x30(%rsp) │ → callq update_rq_clock │ mov 0x8d0(%rbx),%rax │ lea 0x8d0(%rbx),%r11 To check that all is right one can always use the 'o' hotkey and see the original objdump -dS output, that for this case is: update_blocked_averages /proc/kcore │ffffffff990d5489: push %r12 │ffffffff990d548b: push %rbx │ffffffff990d548c: and $0xfffffffffffffff0,%rsp │ffffffff990d5490: sub $0x40,%rsp │ffffffff990d5494: add -0x662cac00(,%rdi,8),%rax │ffffffff990d549c: mov %rax,%rbx │ffffffff990d549f: mov %rax,%rdi │ffffffff990d54a2: mov %rax,0x38(%rsp) │ffffffff990d54a7: → callq 0xffffffff997eb7a0 │ffffffff990d54ac: mov %rbx,%rdi │ffffffff990d54af: mov %rax,0x30(%rsp) │ffffffff990d54b4: → callq 0xffffffff990c7720 │ffffffff990d54b9: mov 0x8d0(%rbx),%rax │ffffffff990d54c0: lea 0x8d0(%rbx),%r11 Use the 'h' hotkey to see a list of available hotkeys. More work needed to cover operands for other instructions, such as 'mov', that can resolve variable names, etc. Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Chris Riyder <[email protected]> Cc: David Ahern <[email protected]> Cc: Hemant Kumar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Markus Trippelsdorf <[email protected]> Cc: Masami Hiramatsu <[email protected]> Cc: Michael Ellerman <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Naveen N. Rao <[email protected]> Cc: Pawel Moll <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Ravi Bangoria <[email protected]> Cc: Russell King <[email protected]> Cc: Taeung Song <[email protected]> Cc: Wang Nan <[email protected]> Link: http://lkml.kernel.org/n/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2016-09-20perf annotate: Pass the symbol's map/dso to the instruction parsersArnaldo Carvalho de Melo2-12/+13
So that things like: → callq 0xffffffff993e3230 found while disassembling /proc/kcore can be beautified by later patches, that will resolve that address to a function, looking it up in /proc/kallsyms. Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Chris Riyder <[email protected]> Cc: David Ahern <[email protected]> Cc: Hemant Kumar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Markus Trippelsdorf <[email protected]> Cc: Masami Hiramatsu <[email protected]> Cc: Michael Ellerman <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Naveen N. Rao <[email protected]> Cc: Pawel Moll <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Ravi Bangoria <[email protected]> Cc: Russell King <[email protected]> Cc: Taeung Song <[email protected]> Cc: Wang Nan <[email protected]> Link: http://lkml.kernel.org/n/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2016-09-20perf annotate: Do not ignore call instruction with indirect targetRavi Bangoria1-6/+2
Do not ignore call instruction with indirect target when its already identified as a call. This is an extension of commit e8ea1561952b ("perf annotate: Use raw form for register indirect call instructions") to generalize annotation for all instructions with indirect calls. This is needed for certain powerpc call instructions that use address in a register (such as bctrl, btarl, ...). Apart from that, when kcore is used to disassemble function, all call instructions were ignored. This patch will fix it as a side effect by not ignoring them. For example, Before (with kcore): mov %r13,%rdi callq 0xffffffff811a7e70 ^ jmpq 64 mov %gs:0x7ef41a6e(%rip),%al After (with kcore): mov %r13,%rdi > callq 0xffffffff811a7e70 ^ jmpq 64 mov %gs:0x7ef41a6e(%rip),%al Suggested-by: Michael Ellerman <[email protected]> [Suggested about 'bctrl' instruction] Signed-off-by: Ravi Bangoria <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Chris Riyder <[email protected]> Cc: Hemant Kumar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Markus Trippelsdorf <[email protected]> Cc: Masami Hiramatsu <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Naveen N. Rao <[email protected]> Cc: Pawel Moll <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Russell King <[email protected]> Cc: Taeung Song <[email protected]> Link: http://lkml.kernel.org/r/1471611578-11255-5-git-send-email-ravi.bangoria@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.