| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Make tool const now that all uses are const and
perf_tool__fill_defaults() won't be used. The aim is to better capture
that sessions don't mutate tools.
Signed-off-by: Ian Rogers <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Anshuman Khandual <[email protected]>
Cc: Athira Rajeev <[email protected]>
Cc: Huacai Chen <[email protected]>
Cc: Ilkka Koskinen <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: James Clark <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: John Garry <[email protected]>
Cc: Jonathan Cameron <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Mike Leach <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Nick Desaulniers <[email protected]>
Cc: Nick Terrell <[email protected]>
Cc: Oliver Upton <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Song Liu <[email protected]>
Cc: Sun Haiyong <[email protected]>
Cc: Suzuki Poulouse <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: Yanteng Si <[email protected]>
Cc: Yicong Yang <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Now all tools are fully initialized prior to use it has no use so
remove.
Signed-off-by: Ian Rogers <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Anshuman Khandual <[email protected]>
Cc: Athira Rajeev <[email protected]>
Cc: Huacai Chen <[email protected]>
Cc: Ilkka Koskinen <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: James Clark <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: John Garry <[email protected]>
Cc: Jonathan Cameron <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Mike Leach <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Nick Desaulniers <[email protected]>
Cc: Nick Terrell <[email protected]>
Cc: Oliver Upton <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Song Liu <[email protected]>
Cc: Sun Haiyong <[email protected]>
Cc: Suzuki Poulouse <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: Yanteng Si <[email protected]>
Cc: Yicong Yang <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Use perf_tool__init() so that more uses of 'struct perf_tool' can be const
and not relying on perf_tool__fill_defaults().
Signed-off-by: Ian Rogers <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Anshuman Khandual <[email protected]>
Cc: Athira Rajeev <[email protected]>
Cc: Huacai Chen <[email protected]>
Cc: Ilkka Koskinen <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: James Clark <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: John Garry <[email protected]>
Cc: Jonathan Cameron <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Mike Leach <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Nick Desaulniers <[email protected]>
Cc: Nick Terrell <[email protected]>
Cc: Oliver Upton <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Song Liu <[email protected]>
Cc: Sun Haiyong <[email protected]>
Cc: Suzuki Poulouse <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: Yanteng Si <[email protected]>
Cc: Yicong Yang <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Use perf_tool__init() so that more uses of 'struct perf_tool' can be const
and not relying on perf_tool__fill_defaults().
Signed-off-by: Ian Rogers <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Anshuman Khandual <[email protected]>
Cc: Athira Rajeev <[email protected]>
Cc: Huacai Chen <[email protected]>
Cc: Ilkka Koskinen <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: James Clark <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: John Garry <[email protected]>
Cc: Jonathan Cameron <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Mike Leach <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Nick Desaulniers <[email protected]>
Cc: Nick Terrell <[email protected]>
Cc: Oliver Upton <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Song Liu <[email protected]>
Cc: Sun Haiyong <[email protected]>
Cc: Suzuki Poulouse <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: Yanteng Si <[email protected]>
Cc: Yicong Yang <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Use perf_tool__init() so that more uses of 'struct perf_tool' can be const
and not relying on perf_tool__fill_defaults().
Signed-off-by: Ian Rogers <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Anshuman Khandual <[email protected]>
Cc: Athira Rajeev <[email protected]>
Cc: Huacai Chen <[email protected]>
Cc: Ilkka Koskinen <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: James Clark <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: John Garry <[email protected]>
Cc: Jonathan Cameron <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Mike Leach <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Nick Desaulniers <[email protected]>
Cc: Nick Terrell <[email protected]>
Cc: Oliver Upton <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Song Liu <[email protected]>
Cc: Sun Haiyong <[email protected]>
Cc: Suzuki Poulouse <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: Yanteng Si <[email protected]>
Cc: Yicong Yang <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Reduce scope of build_id__mark_dso_hit_ops() to the scope of function
perf_session__list_build_ids, its only use, and use perf_tool__init()
for the default values. Move perf_event__exit_del_thread() to event.[ch]
so it can be used in builtin-buildid-list.c.
Signed-off-by: Ian Rogers <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Anshuman Khandual <[email protected]>
Cc: Athira Rajeev <[email protected]>
Cc: Huacai Chen <[email protected]>
Cc: Ilkka Koskinen <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: James Clark <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: John Garry <[email protected]>
Cc: Jonathan Cameron <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Mike Leach <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Nick Desaulniers <[email protected]>
Cc: Nick Terrell <[email protected]>
Cc: Oliver Upton <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Song Liu <[email protected]>
Cc: Sun Haiyong <[email protected]>
Cc: Suzuki Poulouse <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: Yanteng Si <[email protected]>
Cc: Yicong Yang <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Add init function that behaves like perf_tool__fill_defaults() but
assumes all values haven't been initialized.
Signed-off-by: Ian Rogers <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Anshuman Khandual <[email protected]>
Cc: Athira Rajeev <[email protected]>
Cc: Huacai Chen <[email protected]>
Cc: Ilkka Koskinen <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: James Clark <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: John Garry <[email protected]>
Cc: Jonathan Cameron <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Mike Leach <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Nick Desaulniers <[email protected]>
Cc: Nick Terrell <[email protected]>
Cc: Oliver Upton <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Song Liu <[email protected]>
Cc: Sun Haiyong <[email protected]>
Cc: Suzuki Poulouse <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: Yanteng Si <[email protected]>
Cc: Yicong Yang <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The aim here is to eventually make perf_tool__fill_defaults() an init
function so that the tools struct is more const.
Create a tool.c to go along with tool.h. Move perf_tool__fill_defaults()
out of session.c into tool.c along with the default stub values. Add
perf_tool__compressed_is_stub() for a test in
perf_session__process_user_event().
perf_session__process_compressed_event() is only used from being default
initialized so migrate into tool.c.
Signed-off-by: Ian Rogers <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Anshuman Khandual <[email protected]>
Cc: Athira Rajeev <[email protected]>
Cc: Huacai Chen <[email protected]>
Cc: Ilkka Koskinen <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: James Clark <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: John Garry <[email protected]>
Cc: Jonathan Cameron <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Mike Leach <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Nick Desaulniers <[email protected]>
Cc: Nick Terrell <[email protected]>
Cc: Oliver Upton <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Song Liu <[email protected]>
Cc: Sun Haiyong <[email protected]>
Cc: Suzuki Poulouse <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: Yanteng Si <[email protected]>
Cc: Yicong Yang <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The tool pointer (to a struct largely of function pointers) is passed
around but is unchanged except at initialization. Change parameter and
variable types to be const to lower the possibilities of what could
happen with a tool.
Reviewed-by: Adrian Hunter <[email protected]>
Signed-off-by: Ian Rogers <[email protected]>
Tested-by: Adrian Hunter <[email protected]>
Tested-by: Leo Yan <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Anshuman Khandual <[email protected]>
Cc: Athira Rajeev <[email protected]>
Cc: Huacai Chen <[email protected]>
Cc: Ilkka Koskinen <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: James Clark <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: John Garry <[email protected]>
Cc: Jonathan Cameron <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Mike Leach <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Nick Desaulniers <[email protected]>
Cc: Nick Terrell <[email protected]>
Cc: Oliver Upton <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Song Liu <[email protected]>
Cc: Sun Haiyong <[email protected]>
Cc: Suzuki Poulouse <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: Yanteng Si <[email protected]>
Cc: Yicong Yang <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
struct s390_cpumsf_synth was likely cargo culted from other auxtrace
examples. It has no users, so remove.
Reviewed-by: Adrian Hunter <[email protected]>
Signed-off-by: Ian Rogers <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Anshuman Khandual <[email protected]>
Cc: Athira Rajeev <[email protected]>
Cc: Huacai Chen <[email protected]>
Cc: Ilkka Koskinen <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: James Clark <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: John Garry <[email protected]>
Cc: Jonathan Cameron <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Mike Leach <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Nick Desaulniers <[email protected]>
Cc: Nick Terrell <[email protected]>
Cc: Oliver Upton <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Song Liu <[email protected]>
Cc: Sun Haiyong <[email protected]>
Cc: Suzuki Poulouse <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: Yanteng Si <[email protected]>
Cc: Yicong Yang <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Add perf_session__deliver_synth_attr_event that synthesizes a
perf_record_header_attr event with one id. Remove use of
perf_event__synthesize_attr that necessitates the use of the dummy
tool in order to pass the session.
Reviewed-by: Adrian Hunter <[email protected]>
Signed-off-by: Ian Rogers <[email protected]>
Tested-by: Adrian Hunter <[email protected]>
Tested-by: Leo Yan <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Anshuman Khandual <[email protected]>
Cc: Athira Rajeev <[email protected]>
Cc: Huacai Chen <[email protected]>
Cc: Ilkka Koskinen <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: James Clark <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: John Garry <[email protected]>
Cc: Jonathan Cameron <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Mike Leach <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Nick Desaulniers <[email protected]>
Cc: Nick Terrell <[email protected]>
Cc: Oliver Upton <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Song Liu <[email protected]>
Cc: Sun Haiyong <[email protected]>
Cc: Suzuki Poulouse <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: Yanteng Si <[email protected]>
Cc: Yicong Yang <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The processing of leader samples would turn an individual sample with
a group of read values into multiple samples. 'perf inject' would pass
through the additional samples increasing the output data file size:
$ perf record -g -e "{instructions,cycles}:S" -o perf.orig.data true
$ perf script -D -i perf.orig.data | sed -e 's/perf.orig.data/perf.data/g' > orig.txt
$ perf inject -i perf.orig.data -o perf.new.data
$ perf script -D -i perf.new.data | sed -e 's/perf.new.data/perf.data/g' > new.txt
$ diff -u orig.txt new.txt
--- orig.txt 2024-07-29 14:29:40.606576769 -0700
+++ new.txt 2024-07-29 14:30:04.142737434 -0700
...
[email protected] [0x30]: event: 3
[email protected] [0xd0]: event: 9
+.
+. ... raw event: size 208 bytes
+. 0000: 09 00 00 00 01 00 d0 00 fc 72 01 86 ff ff ff ff .........r......
+. 0010: 74 7d 2c 00 74 7d 2c 00 fb c3 79 f9 ba d5 05 00 t},.t},...y.....
+. 0020: e6 cb 1a 00 00 00 00 00 01 00 00 00 00 00 00 00 ................
+. 0030: 02 00 00 00 00 00 00 00 76 01 00 00 00 00 00 00 ........v.......
+. 0040: e6 cb 1a 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
+. 0050: 62 18 00 00 00 00 00 00 f6 cb 1a 00 00 00 00 00 b...............
+. 0060: 00 00 00 00 00 00 00 00 0c 00 00 00 00 00 00 00 ................
+. 0070: 80 ff ff ff ff ff ff ff fc 72 01 86 ff ff ff ff .........r......
+. 0080: f3 0e 6e 85 ff ff ff ff 0c cb 7f 85 ff ff ff ff ..n.............
+. 0090: bc f2 87 85 ff ff ff ff 44 af 7f 85 ff ff ff ff ........D.......
+. 00a0: bd be 7f 85 ff ff ff ff 26 d0 7f 85 ff ff ff ff ........&.......
+. 00b0: 6d a4 ff 85 ff ff ff ff ea 00 20 86 ff ff ff ff m......... .....
+. 00c0: 00 fe ff ff ff ff ff ff 57 14 4f 43 fc 7e 00 00 ........W.OC.~..
+
+1642373909693435 0xc550 [0xd0]: PERF_RECORD_SAMPLE(IP, 0x1): 2915700/2915700: 0xffffffff860172fc period: 1 addr: 0
+... FP chain: nr:12
+..... 0: ffffffffffffff80
+..... 1: ffffffff860172fc
+..... 2: ffffffff856e0ef3
+..... 3: ffffffff857fcb0c
+..... 4: ffffffff8587f2bc
+..... 5: ffffffff857faf44
+..... 6: ffffffff857fbebd
+..... 7: ffffffff857fd026
+..... 8: ffffffff85ffa46d
+..... 9: ffffffff862000ea
+..... 10: fffffffffffffe00
+..... 11: 00007efc434f1457
+... sample_read:
+.... group nr 2
+..... id 00000000001acbe6, value 0000000000000176, lost 0
+..... id 00000000001acbf6, value 0000000000001862, lost 0
+
[email protected] [0x30]: event: 3
...
This behavior is incorrect as in the case above 'perf inject' should
have done nothing. Fix this behavior by disabling separating samples
for a tool that requests it. Only request this for `perf inject` so as
to not affect other perf tools. With the patch and the test above
there are no differences between the orig.txt and new.txt.
Fixes: e4caec0d1af3d608 ("perf evsel: Add PERF_SAMPLE_READ sample related processing")
Signed-off-by: Ian Rogers <[email protected]>
Acked-by: Namhyung Kim <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The bpf_get_stackid() helper returns a signed type to check whether it
failed to get a stacktrace or not. But it saved the result in u32 and
checked if the value is negative.
376 if (needs_callstack) {
377 pelem->stack_id = bpf_get_stackid(ctx, &stacks,
378 BPF_F_FAST_STACK_CMP | stack_skip);
--> 379 if (pelem->stack_id < 0)
./tools/perf/util/bpf_skel/lock_contention.bpf.c:379 contention_begin()
warn: unsigned 'pelem->stack_id' is never less than zero.
Let's change the type to s32 instead.
Fixes: 6d499a6b3d90277d ("perf lock: Print the number of lost entries for BPF")
Reported-by: Dan Carpenter <[email protected]>
Signed-off-by: Namhyung Kim <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Similarly to other subcommands (like report, top), it would be handy to
provide a path for addr2line command.
Signed-off-by: Martin Liska <[email protected]>
Cc: Ian Rogers <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The --skip-empty option is to hide dummy events in a group. Like other
output mode in 'perf report' and 'perf annotate', the data-type
profiling output should support the option.
Committer testing:
With dummy:
root@number:~# perf annotate --stdio --group --data-type --skip-empty | head -24
Annotate type: 'pthread_mutex_t' in /usr/lib64/libc.so.6 (50 samples):
event[0] = cpu_atom/mem-loads,ldlat=30/P
event[1] = cpu_atom/mem-stores/P
event[2] = dummy:u
============================================================================
Percent offset size field
100.00 100.00 0.00 0 40 pthread_mutex_t {
100.00 100.00 0.00 0 40 struct __pthread_mutex_s __data {
45.21 84.54 0.00 0 4 int __lock;
0.00 0.00 0.00 4 4 unsigned int __count;
0.00 1.83 0.00 8 4 int __owner;
5.19 10.65 0.00 12 4 unsigned int __nusers;
49.61 2.97 0.00 16 4 int __kind;
0.00 0.00 0.00 20 2 short int __spins;
0.00 0.00 0.00 22 2 short int __elision;
0.00 0.00 0.00 24 16 __pthread_list_t __list {
0.00 0.00 0.00 24 8 struct __pthread_internal_list* __prev;
0.00 0.00 0.00 32 8 struct __pthread_internal_list* __next;
};
};
0.00 0.00 0.00 0 0 char[] __size;
45.21 84.54 0.00 0 8 long int __align;
};
Skipping it:
root@number:~# perf annotate --stdio --group --data-type --skip-empty | head -24
Annotate type: 'pthread_mutex_t' in /usr/lib64/libc.so.6 (50 samples):
event[0] = cpu_atom/mem-loads,ldlat=30/P
event[1] = cpu_atom/mem-stores/P
============================================================================
Percent offset size field
100.00 100.00 0 40 pthread_mutex_t {
100.00 100.00 0 40 struct __pthread_mutex_s __data {
45.21 84.54 0 4 int __lock;
0.00 0.00 4 4 unsigned int __count;
0.00 1.83 8 4 int __owner;
5.19 10.65 12 4 unsigned int __nusers;
49.61 2.97 16 4 int __kind;
0.00 0.00 20 2 short int __spins;
0.00 0.00 22 2 short int __elision;
0.00 0.00 24 16 __pthread_list_t __list {
0.00 0.00 24 8 struct __pthread_internal_list* __prev;
0.00 0.00 32 8 struct __pthread_internal_list* __next;
};
};
0.00 0.00 0 0 char[] __size;
45.21 84.54 0 8 long int __align;
};
Annotate type: 'pthread_mutexattr_t' in /usr/lib64/libc.so.6 (1 samples):
root@number:~#
Signed-off-by: Namhyung Kim <[email protected]>
Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
In that case we have a set of placeholder functions, one of them uses a
'Dwarf_Addr' type that is not present as it is defined in the missing
DWARF libraries, so provide a placeholder typedef for that as well.
The build error before this patch:
In file included from util/annotate.c:28:
util/debuginfo.h:44:46: error: unknown type name ‘Dwarf_Addr’
44 | Dwarf_Addr *offs __maybe_unused,
| ^~~~~~~~~~
make[6]: *** [/home/acme/git/perf-tools-next/tools/build/Makefile.build:106: util/annotate.o] Error 1
make[6]: *** Waiting for unfinished jobs....
Acked-by: Namhyung Kim <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Link: https://lore.kernel.org/lkml/CAM9d7ciushSwEfj7yW4rtDEJBTcCB991V4cswwFEL+cv6QF2pg@mail.gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
For example, when using the Alder Lake PMU memory load event, the
instruction latency is stored in 'ins_lat', while the cache latency
is stored in 'weight'.
This patch reports the 'ins_lat' field for Python scripting.
Committer testing:
On a Rocket Lake Refresh Intel machine (14th gen):
root@number:~# grep -m1 'model name' /proc/cpuinfo
model name : Intel(R) Core(TM) i7-14700K
root@number:~# perf mem record -a sleep 5
Memory events are enabled on a subset of CPUs: 16-27
[ perf record: Woken up 85 times to write data ]
[ perf record: Captured and wrote 41.236 MB perf.data (191390 samples) ]
root@number:~# perf evlist -v
cpu_atom/mem-loads,ldlat=30/P: type: 10 (cpu_atom), size: 136, config: 0x5d0 (mem-loads), { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|ADDR|CPU|PERIOD|IDENTIFIER|DATA_SRC|WEIGHT_STRUCT, read_format: ID|LOST, disabled: 1, inherit: 1, freq: 1, precise_ip: 3, sample_id_all: 1, { bp_addr, config1 }: 0x1f
cpu_atom/mem-stores/P: type: 10 (cpu_atom), size: 136, config: 0x6d0 (mem-stores), { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|ADDR|CPU|PERIOD|IDENTIFIER|DATA_SRC|WEIGHT_STRUCT, read_format: ID|LOST, disabled: 1, inherit: 1, freq: 1, precise_ip: 3, sample_id_all: 1
dummy:u: type: 1 (software), size: 136, config: 0x9 (PERF_COUNT_SW_DUMMY), { sample_period, sample_freq }: 1, sample_type: IP|TID|TIME|ADDR|CPU|IDENTIFIER|DATA_SRC|WEIGHT_STRUCT, read_format: ID|LOST, inherit: 1, exclude_kernel: 1, exclude_hv: 1, mmap: 1, comm: 1, task: 1, mmap_data: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1, ksymbol: 1, bpf_event: 1
root@number:~#
Now generate a python script to then dump the dictionary that now needs
to have that 'ins_lat' field:
root@number:~# perf script --gen python
generated Python script: perf-script.py
root@number:~# vim perf-script.py
root@number:~# perf script -s perf-script.py | head -40
in trace_begin
in trace_end
root@number:~# vim perf-script.py
Reviewed-by: Adrian Hunter <[email protected]>
Signed-off-by: Zixian Cai <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Ben Gainey <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Paran Lee <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The 'struct callchain_cursor_node' has a 'struct map_symbol' whose maps
and map members are reference counted. Ensure these values use a _get
routine to increment the reference counts and use map_symbol__exit() to
release the reference counts.
Do similar for 'struct thread's prev_lbr_cursor, but save the size of
the prev_lbr_cursor array so that it may be iterated.
Ensure that when stitch_nodes are placed on the free list the
map_symbols are exited.
Fix resolve_lbr_callchain_sample() by replacing list_replace_init() to
list_splice_init(), so the whole list is moved and nodes aren't leaked.
A reproduction of the memory leaks is possible with a leak sanitizer
build in the perf report command of:
```
$ perf record -e cycles --call-graph lbr perf test -w thloop
$ perf report --stitch-lbr
```
Reviewed-by: Kan Liang <[email protected]>
Fixes: ff165628d72644e3 ("perf callchain: Stitch LBR call stack")
Signed-off-by: Ian Rogers <[email protected]>
[ Basic tests after applying the patch, repeating the example above ]
Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Anne Macedo <[email protected]>
Cc: Changbin Du <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The die_get_typename() would resolve typedef and get to the original
type. But sometimes the original type is a struct without name and it
makes the output confusing and hard to read.
This is a diff of perf report -s type before and after the change.
New types such as atomic{,64}_t and sigset_t appeared and the portion
of unnamed struct was reduced. Also u32, u64 and size_t were splitted
from the base types.
--- b 2024-08-01 17:02:34.307809952 -0700
+++ a 2024-08-07 14:17:05.245853999 -0700
- 2.40% long unsigned int
+ 2.26% long unsigned int
- 1.56% unsigned int
+ 1.27% unsigned int
- 0.98% struct
- 0.79% long long unsigned int
+ 0.58% long long unsigned int
+ 0.36% struct
+ 0.27% atomic64_t
+ 0.22% u32
+ 0.21% u64
+ 0.19% atomic_t
+ 0.13% size_t
- 0.08% struct seqcount_spinlock
+ 0.08% seqcount_spinlock_t
+ 0.08% sigset_t
+ 0.08% __poll_t
Let's use the typedef name directly and the resolved to get the size of
the type.
Committer testing:
root@x1:~# diff -u before after | head -30
--- before 2024-08-08 09:35:13.917325041 -0300
+++ after 2024-08-08 09:37:35.312257905 -0300
@@ -10,25 +10,27 @@
# ........ .........
#
79.40% (unknown)
- 2.28% union
1.96% (stack operation)
- 1.24% struct
+ 1.87% pthread_mutex_t
0.99% u32[]
- 0.92% unsigned int
0.77% struct task_struct
+ 0.75% U32
0.75% struct pcpu_hot
0.63% struct qspinlock
+ 0.61% atomic_t
0.59% struct list_head
- 0.58% int
0.53% struct cfs_rq
0.51% BYTE*
- 0.48% unsigned char
+ 0.48% BYTE
0.48% long unsigned int
0.46% struct rq
0.41% struct worker
0.41% struct memcg_vmstats_percpu
+ 0.41% pthread_cond_t
0.37% _Bool
+ 0.36% int
root@x1:~#
Signed-off-by: Namhyung Kim <[email protected]>
Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Athira Rajeev <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Masami Hiramatsu <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
In find_data_type(), it creates and deletes a debug info whenver it
tries to find data type for a sample. This is inefficient and it most
likely accesses the same binary again and again.
Let's add a single entry cache the debug info structure for the last DSO.
Depending on sample data, it usually gives me 2~3x (and sometimes more)
speed ups.
Note that this will introduce a little difference in the output due to
the order of checking stack operations. It used to check the stack ops
before checking the availability of debug info but I moved it after the
symbol check. So it'll report stack operations in DSOs without debug
info as unknown. But I think it's ok and better to have the checking
near the caching logic.
Committer testing:
root@x1:~# perf mem record -a sleep 5s
root@x1:~# perf evlist
cpu_atom/mem-loads,ldlat=30/P
cpu_atom/mem-stores/P
dummy:u
root@x1:~# diff -u before after
--- before 2024-08-08 09:33:53.880780784 -0300
+++ after 2024-08-08 09:35:13.917325041 -0300
@@ -81,8 +81,8 @@
# Overhead Data Type
# ........ .........
#
- 55.43% (unknown)
- 11.61% (stack operation)
+ 55.56% (unknown)
+ 11.48% (stack operation)
4.93% struct pcpu_hot
3.26% unsigned int
2.48% struct
Signed-off-by: Namhyung Kim <[email protected]>
Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Athira Rajeev <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
iter_finish_branch_entry() doesn't put the branch_info from/to map
elements creating memory leaks. This can be seen with:
```
$ perf record -e cycles -b perf test -w noploop
$ perf report -D
...
Direct leak of 984344 byte(s) in 123043 object(s) allocated from:
#0 0x7fb2654f3bd7 in malloc libsanitizer/asan/asan_malloc_linux.cpp:69
#1 0x564d3400d10b in map__get util/map.h:186
#2 0x564d3400d10b in ip__resolve_ams util/machine.c:1981
#3 0x564d34014d81 in sample__resolve_bstack util/machine.c:2151
#4 0x564d34094790 in iter_prepare_branch_entry util/hist.c:898
#5 0x564d34098fa4 in hist_entry_iter__add util/hist.c:1238
#6 0x564d33d1f0c7 in process_sample_event tools/perf/builtin-report.c:334
#7 0x564d34031eb7 in perf_session__deliver_event util/session.c:1655
#8 0x564d3403ba52 in do_flush util/ordered-events.c:245
#9 0x564d3403ba52 in __ordered_events__flush util/ordered-events.c:324
#10 0x564d3402d32e in perf_session__process_user_event util/session.c:1708
#11 0x564d34032480 in perf_session__process_event util/session.c:1877
#12 0x564d340336ad in reader__read_event util/session.c:2399
#13 0x564d34033fdc in reader__process_events util/session.c:2448
#14 0x564d34033fdc in __perf_session__process_events util/session.c:2495
#15 0x564d34033fdc in perf_session__process_events util/session.c:2661
#16 0x564d33d27113 in __cmd_report tools/perf/builtin-report.c:1065
#17 0x564d33d27113 in cmd_report tools/perf/builtin-report.c:1805
#18 0x564d33e0ccb7 in run_builtin tools/perf/perf.c:350
#19 0x564d33e0d45e in handle_internal_command tools/perf/perf.c:403
#20 0x564d33cdd827 in run_argv tools/perf/perf.c:447
#21 0x564d33cdd827 in main tools/perf/perf.c:561
...
```
Clearing up the map_symbols properly creates maps reference count
issues so resolve those. Resolving this issue doesn't improve peak
heap consumption for the test above.
Committer testing:
$ sudo dnf install libasan
$ make -k CORESIGHT=1 EXTRA_CFLAGS="-fsanitize=address" CC=clang O=/tmp/build/$(basename $PWD)/ -C tools/perf install-bin
Reviewed-by: Kan Liang <[email protected]>
Signed-off-by: Ian Rogers <[email protected]>
Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Sun Haiyong <[email protected]>
Cc: Yanteng Si <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Like in 'perf report', we want to hide empty events in the 'perf annotate'
output. This is consistent when the option is set in perf report.
For example, the following command would use 3 events including dummy.
$ perf mem record -a -- perf test -w noploop
$ perf evlist
cpu/mem-loads,ldlat=30/P
cpu/mem-stores/P
dummy:u
Just using perf annotate with --group will show the all 3 events.
$ perf annotate --group --stdio | head
Percent | Source code & Disassembly of ...
--------------------------------------------------------------
: 0 0xe060 <_dl_relocate_object>:
0.00 0.00 0.00 : e060: pushq %rbp
0.00 0.00 0.00 : e061: movq %rsp, %rbp
0.00 0.00 0.00 : e064: pushq %r15
0.00 0.00 0.00 : e066: movq %rdi, %r15
0.00 0.00 0.00 : e069: pushq %r14
0.00 0.00 0.00 : e06b: pushq %r13
0.00 0.00 0.00 : e06d: movl %edx, %r13d
Now with --skip-empty, it'll hide the last dummy event.
$ perf annotate --group --stdio --skip-empty | head
Percent | Source code & Disassembly of ...
------------------------------------------------------
: 0 0xe060 <_dl_relocate_object>:
0.00 0.00 : e060: pushq %rbp
0.00 0.00 : e061: movq %rsp, %rbp
0.00 0.00 : e064: pushq %r15
0.00 0.00 : e066: movq %rdi, %r15
0.00 0.00 : e069: pushq %r14
0.00 0.00 : e06b: pushq %r13
0.00 0.00 : e06d: movl %edx, %r13d
Committer testing:
root@x1:~# perf evlist
cpu_atom/mem-loads,ldlat=30/P
cpu_atom/mem-stores/P
dummy:u
root@x1:~#
Before:
root@x1:~# perf annotate --group --stdio2 do_lookup_x | head -25
Samples: 20 of events 'cpu_atom/mem-loads,ldlat=30/P, cpu_atom/mem-stores/P, dummy:u', 4000 Hz, Event count (approx.): 769079, [percent: local period]
do_lookup_x() /usr/lib64/ld-linux-x86-64.so.2
Percent 0x9900 <do_lookup_x>:
pushq %rbp
movq %rsp,%rbp
pushq %r15
pushq %r14
pushq %r13
pushq %r12
pushq %rbx
subq $0x88,%rsp
movq %rdi,-0x50(%rbp)
movl 8(%r9),%edi
movq 0x10(%rbp),%r12
movq 0x28(%rbp),%r10
movq %rdx,-0x70(%rbp)
movq %rcx,-0x58(%rbp)
movq %rdi,%r11
0.00 5.73 0.00 movq %r8,-0x68(%rbp)
movq (%r9),%r8
movl %esi,%eax
8.30 0.00 0.00 movl 0x30(%rbp),%r9d
movl %esi,%r15d
shrl $6, %eax
movq %r8,%r13
root@x1:~#
After:
root@x1:~# perf annotate --group --skip-empty --stdio2 do_lookup_x | head -25
Samples: 20 of events 'cpu_atom/mem-loads,ldlat=30/P, cpu_atom/mem-stores/P', 4000 Hz, Event count (approx.): 769079, [percent: local period]
do_lookup_x() /usr/lib64/ld-linux-x86-64.so.2
Percent 0x9900 <do_lookup_x>:
pushq %rbp
movq %rsp,%rbp
pushq %r15
pushq %r14
pushq %r13
pushq %r12
pushq %rbx
subq $0x88,%rsp
movq %rdi,-0x50(%rbp)
movl 8(%r9),%edi
movq 0x10(%rbp),%r12
movq 0x28(%rbp),%r10
movq %rdx,-0x70(%rbp)
movq %rcx,-0x58(%rbp)
movq %rdi,%r11
0.00 5.73 movq %r8,-0x68(%rbp)
movq (%r9),%r8
movl %esi,%eax
8.30 0.00 movl 0x30(%rbp),%r9d
movl %esi,%r15d
shrl $6, %eax
movq %r8,%r13
root@x1:~#
Signed-off-by: Namhyung Kim <[email protected]>
Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
This is a preparation to support skipping empty events.
Signed-off-by: Namhyung Kim <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The annotation__pcnt_width() calculates the screen width for the
overhead (percent) area considering event groups properly. Use this
function consistently so that we can make sure it has similar output
in different modes. But there's a difference in stdio and tui output:
stdio uses 8 and tui uses 7 for a percent.
Let's use 8 and adjust the print width in __annotation_line__write()
properly.
Signed-off-by: Namhyung Kim <[email protected]>
Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
We want to use it in different places so make sure it sets properly
in symbol__annotate() before creating the disasm lines.
Signed-off-by: Namhyung Kim <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The data_nr keeps the number of entries in al->data[] so it should use
it when it iterates the array. The notes->src->nr_events should have
the same number but it'd be natural to use al->data_nr.
Signed-off-by: Namhyung Kim <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Some sort keys are meaningful only in a specific mode - like branch
stack and memory (data-src). Add the mode to skip unnecessary ones.
This will be used for 'perf mem report' later.
While at it, change the prefix for the -F/--fields option to remove
the duplicate part.
Before:
$ perf report -F
Error: switch `F' requires a value
Usage: perf report [<options>]
-F, --fields <key[,keys...]>
output field(s): overhead period sample overhead overhead_sys
overhead_us overhead_guest_sys overhead_guest_us overhead_children
sample period weight1 weight2 weight3 ins_lat retire_lat
...
After:
$ perf report -F
Error: switch `F' requires a value
Usage: perf report [<options>]
-F, --fields <key[,keys...]>
output field(s): overhead overhead_sys overhead_us
overhead_guest_sys overhead_guest_us overhead_children
sample period weight1 weight2 weight3 ins_lat retire_lat
...
Signed-off-by: Namhyung Kim <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Athira Rajeev <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The 'struct mem_info' is created by iter_prepare_mem_entry() at the
beginning and destroyed by iter_finish_mem_entry() at the end.
So if it's used in a new hist_entry, it should be cloned.
Simplify (hopefully) the logic by adding some helper functions and by
not holding the refcount in the temporary entry.
Signed-off-by: Namhyung Kim <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Athira Rajeev <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
When perf code was compiled one way for the binary and another for the
python module, the PYTHON_PERF ifdef was used to remove some code from
the python module.
Since switching to building the perf code as a series of libraries, with
the same libraries being used for the python module, the ifdefs became
unused as PYTHON_PERF is never defined. As such remove the ifdefs.
Fixes: 9dabf4003423c8d3 ("perf python: Switch module to linking libraries from building source")
Signed-off-by: Ian Rogers <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: James Clark <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
capstone bpf headers
There is a clash of the libbpf and capstone libraries, that ends up
with:
In file included from /usr/include/capstone/capstone.h:325,
from util/disasm.c:1513:
/usr/include/capstone/bpf.h:94:14: error: ‘bpf_insn’ defined as wrong kind of tag
94 | typedef enum bpf_insn {
So far we're just trying to avoid this by not having both headers
included in the same .c or .h file, do it one more time by moving the
BPF diassembly routines from util/disasm.c to util/disasm_bpf.c.
This is only being hit when building with BUILD_NONDISTRO=1, i.e.
building with binutils-devel, that isn't the in the default build due to
a licencing clash. We need to reimplement what is now isolated in
util/disasm_bpf.c using some other library to have BPF annotation
feature that now only is available with BUILD_NONDISTRO=1.
Fixes: 6d17edc113de1e21 ("perf annotate: Use libcapstone to disassemble")
Cc: Adrian Hunter <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Namhyung Kim <[email protected]>
Link: https://lore.kernel.org/lkml/ZqpUSKPxMwaQKORr@x1
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
As the BPF filter is shared between other processes, it should have its
own counter for each invocation. Add a new array map (lost_count) to
save the count using the same index as the filter. It should clear the
count before running the filter.
Signed-off-by: Namhyung Kim <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: KP Singh <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Song Liu <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
And use the pinned objects for unprivileged users to profile their own
tasks. The BPF objects need to be pinned in the BPF-fs by root first
and it'll be handled in the later patch.
Signed-off-by: Namhyung Kim <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: KP Singh <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Song Liu <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
If the target is a list of tasks, it can use a shared hash map for
filter expressions. The key of the filter map is an integer index like
in an array. A separate pid_hash map is added to get the index for the
filter map using the tgid.
For system-wide mode including per-cpu or per-user targets are handled
by the single entry map like before.
Signed-off-by: Namhyung Kim <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: KP Singh <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Song Liu <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
This is needed to prepare target-specific actions in the later patch.
We want to reuse the pinned BPF program and map for regular users to
profile their own processes.
Signed-off-by: Namhyung Kim <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: KP Singh <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Song Liu <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
And the value is now an array. This is to support multiple filter
entries in the map later.
No functional changes intended.
Signed-off-by: Namhyung Kim <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: KP Singh <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Song Liu <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
When executing the command "perf list", I met "Error: failed to open
tracing events directory" twice, the first reason is that there is no
"/sys/kernel/tracing/events" directory due to it does not enable the
kernel tracing infrastructure with CONFIG_FTRACE, the second reason
is that there is no root privileges.
Add the error string to tell the users what happened and what should
to do, and also call put_tracing_file() to free events_path a little
later to avoid messy code in the error message.
At the same time, just remove the redundant "/" of the file path in
the function get_tracing_file(), otherwise it shows something like
"/sys/kernel/tracing//events".
Before:
$ ./perf list
Error: failed to open tracing events directory
After:
(1) Without CONFIG_FTRACE
$ ./perf list
Error: failed to open tracing events directory
/sys/kernel/tracing/events: No such file or directory
(2) With CONFIG_FTRACE but no root privileges
$ ./perf list
Error: failed to open tracing events directory
/sys/kernel/tracing/events: Permission denied
Committer testing:
Redirect stdout to null to quickly test the patch:
Before:
$ perf list > /dev/null
Error: failed to open tracing events directory
$
After:
$ perf list > /dev/null
Error: failed to open tracing events directory
/sys/kernel/tracing/events: Permission denied
$
Signed-off-by: Tiezhu Yang <[email protected]>
Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The 'perf ftrace profile' command is to get function execution profiles
using function-graph tracer so that users can see the total, average,
max execution time as well as the number of invocations easily.
The following is a profile for the perf_event_open syscall.
$ sudo perf ftrace profile -G __x64_sys_perf_event_open -- \
perf stat -e cycles -C1 true 2> /dev/null | head
# Total (us) Avg (us) Max (us) Count Function
65.611 65.611 65.611 1 __x64_sys_perf_event_open
30.527 30.527 30.527 1 anon_inode_getfile
30.260 30.260 30.260 1 __anon_inode_getfile
29.700 29.700 29.700 1 alloc_file_pseudo
17.578 17.578 17.578 1 d_alloc_pseudo
17.382 17.382 17.382 1 __d_alloc
16.738 16.738 16.738 1 kmem_cache_alloc_lru
15.686 15.686 15.686 1 perf_event_alloc
14.012 7.006 11.264 2 obj_cgroup_charge
#
Reviewed-by: Ian Rogers <[email protected]>
Signed-off-by: Namhyung Kim <[email protected]>
Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Changbin Du <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Steven Rostedt (VMware) <[email protected]>
Link: https://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The 'graph-tail' option is to print function name as a comment at the end.
This is useful when a large function is mixed with other functions
(possibly from different CPUs).
For example,
$ sudo perf ftrace -- perf stat true
...
1) | get_unused_fd_flags() {
1) | alloc_fd() {
1) 0.178 us | _raw_spin_lock();
1) 0.187 us | expand_files();
1) 0.169 us | _raw_spin_unlock();
1) 1.211 us | }
1) 1.503 us | }
$ sudo perf ftrace --graph-opts tail -- perf stat true
...
1) | get_unused_fd_flags() {
1) | alloc_fd() {
1) 0.099 us | _raw_spin_lock();
1) 0.083 us | expand_files();
1) 0.081 us | _raw_spin_unlock();
1) 0.601 us | } /* alloc_fd */
1) 0.751 us | } /* get_unused_fd_flags */
Reviewed-by: Ian Rogers <[email protected]>
Signed-off-by: Namhyung Kim <[email protected]>
Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Changbin Du <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Steven Rostedt (VMware) <[email protected]>
Link: https://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
evsel__is_aux_event() identifies AUX area tracing selected events.
S390_CPUMSF uses a raw event type (PERF_TYPE_RAW - refer
s390_cpumsf_evsel_is_auxtrace()) not a PMU type value that could be checked
in evsel__is_aux_event(). However it sets needs_auxtrace_mmap (refer
auxtrace_record__init()), so check that first.
Currently, the features that use evsel__is_aux_event() are used only by
Intel PT, but that may change in the future.
Reviewed-by: Andi Kleen <[email protected]>
Reviewed-by: Leo Yan <[email protected]>
Signed-off-by: Adrian Hunter <[email protected]>
Acked-by: Ian Rogers <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Heiko Carstens <[email protected]>
Cc: Hendrik Brueckner <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: James Clark <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Jonathan Cameron <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Mike Leach <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Suzuki Poulouse <[email protected]>
Cc: Thomas Richter <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: Yicong Yang <[email protected]>
Cc: [email protected]
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Normally exception packets don't directly output a branch sample, but
if they're the last record in a buffer then they will. Because they
don't have addresses set we'll see the placeholder value
CS_ETM_INVAL_ADDR (0xdeadbeef) in the output.
Since commit 6035b6804bdf ("perf cs-etm: Support dummy address value for
CS_ETM_TRACE_ON packet") we've used 0 as an externally visible "not set"
address value. For consistency reasons and to not make exceptions look
like an error, change them to use 0 too.
This is particularly visible when doing userspace only tracing because
trace is disabled when jumping to the kernel, causing the flush and then
forcing the last exception packet to be emitted as a branch. With kernel
trace included, there is no flush so exception packets don't generate
samples until the next range packet and they'll pick up the correct
address.
Before:
$ perf record -e cs_etm//u -- stress -i 1 -t 1
$ perf script -F comm,ip,addr,flags
stress syscall ffffb7eedbc0 => deadbeefdeadbeef
stress syscall ffffb7f14a14 => deadbeefdeadbeef
stress syscall ffffb7eedbc0 => deadbeefdeadbeef
After:
stress syscall ffffb7eedbc0 => 0
stress syscall ffffb7f14a14 => 0
stress syscall ffffb7eedbc0 => 0
Reviewed-by: Mike Leach <[email protected]>
Signed-off-by: James Clark <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: James Clark <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: John Garry <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Suzuki Poulouse <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
instruction
Since the "ins.name" is not set while using raw instruction,
'perf annotate' with insn-stat gives wrong data:
Result from "./perf annotate --data-type --insn-stat":
Annotate Instruction stats
total 615, ok 419 (68.1%), bad 196 (31.9%)
Name : Good Bad
-----------------------------------------------------------
: 419 196
This patch sets "dl->ins.name" in arch specific function
"check_ppc_insn" while initialising "struct disasm_line".
Also update "ins_find" function to pass "struct disasm_line" as a
parameter so as to set its name field in arch specific call.
With the patch changes:
Annotate Instruction stats
total 609, ok 446 (73.2%), bad 163 (26.8%)
Name/opcode : Good Bad
-----------------------------------------------------------
58 : 323 80
32 : 49 43
34 : 33 11
OP_31_XOP_LDX : 8 20
40 : 23 0
OP_31_XOP_LWARX : 5 1
OP_31_XOP_LWZX : 2 3
OP_31_XOP_LDARX : 3 0
33 : 0 2
OP_31_XOP_LBZX : 0 1
OP_31_XOP_LWAX : 0 1
OP_31_XOP_LHZX : 0 1
Reviewed-by: Kajol Jain <[email protected]>
Reviewed-by: Namhyung Kim <[email protected]>
Signed-off-by: Athira Rajeev <[email protected]>
Tested-by: Kajol Jain <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Akanksha J N <[email protected]>
Cc: Christophe Leroy <[email protected]>
Cc: Disha Goel <[email protected]>
Cc: Hari Bathini <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Madhavan Srinivasan <[email protected]>
Cc: Segher Boessenkool <[email protected]>
Link: https://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Now perf uses the capstone library to disassemble the instructions in
x86. capstone is used (if available) for perf annotate to speed up.
Currently it only supports x86 architecture.
This patch includes changes to enable this in powerpc.
For now, only for data type sort keys, this method is used and only
binary code (raw instruction) is read. This is because powerpc approach
to understand instructions and reg fields uses raw instruction.
The "cs_disasm" is currently not enabled. While attempting to do
cs_disasm, observation is that some of the instructions were not
identified (ex: extswsli, maddld) and it had to fallback to use objdump.
Hence enabling "cs_disasm" is added in comment section as a TODO for
powerpc.
Reviewed-by: Kajol Jain <[email protected]>
Reviewed-by: Namhyung Kim <[email protected]>
Signed-off-by: Athira Rajeev <[email protected]>
Tested-by: Kajol Jain <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Akanksha J N <[email protected]>
Cc: Christophe Leroy <[email protected]>
Cc: Disha Goel <[email protected]>
Cc: Hari Bathini <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Madhavan Srinivasan <[email protected]>
Cc: Segher Boessenkool <[email protected]>
Link: https://lore.kernel.org/lkml/[email protected]
[ Use dso__nsinfo(dso) as required to match EXTRA_CFLAGS=-DREFCNT_CHECKING=1 build expectations ]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
capstone_init is made availbale for all archs to use and updated to
enable support for CS_ARCH_PPC as well. Patch removes
open_capstone_handle and uses capstone_init in all the places.
Committer notes:
Avoid including capstone/capstone.h from print_insn.h to not break the
build in builtin-script.c due to the namespace clash with libbpf:
/usr/include/capstone/bpf.h:94:14: error: 'bpf_insn' defined as wrong kind of tag
Reviewed-by: Kajol Jain <[email protected]>
Reviewed-by: Namhyung Kim <[email protected]>
Signed-off-by: Athira Rajeev <[email protected]>
Tested-by: Kajol Jain <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Akanksha J N <[email protected]>
Cc: Christophe Leroy <[email protected]>
Cc: Disha Goel <[email protected]>
Cc: Hari Bathini <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Madhavan Srinivasan <[email protected]>
Cc: Segher Boessenkool <[email protected]>
Link: https://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
symbol disassemble
symbol__disassemble_capstone in util/disasm.c calls function
open_capstone_handle to open/init the capstone.
We already have a capstone_init function in "util/print_insn.c". But
capstone_init is defined as a static function in util/print_insn.c.
Change this and also add the function in print_insn.h
The open_capstone_handle checks the disassembler_style option from
annotation_options to decide whether to set CS_OPT_SYNTAX_ATT.
Add that logic in capstone_init also and by default set it to true.
Reviewed-by: Kajol Jain <[email protected]>
Reviewed-by: Namhyung Kim <[email protected]>
Signed-off-by: Athira Rajeev <[email protected]>
Tested-by: Kajol Jain <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Akanksha J N <[email protected]>
Cc: Christophe Leroy <[email protected]>
Cc: Disha Goel <[email protected]>
Cc: Hari Bathini <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Madhavan Srinivasan <[email protected]>
Cc: Segher Boessenkool <[email protected]>
Link: https://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Add instruction tracking function "update_insn_state_powerpc" for
powerpc. Example sequence in powerpc:
ld r10,264(r3)
mr r31,r3
<<after some sequence>
ld r9,312(r31)
Consider ithe sample is pointing to: "ld r9,312(r31)".
Here the memory reference is hit at "312(r31)" where 312 is the offset
and r31 is the source register.
Previous instruction sequence shows that register state of r3 is moved
to r31.
So to identify the data type for r31 access, the previous instruction
("mr") needs to be tracked and the state type entry has to be updated.
Current instruction tracking support in perf tools infrastructure is
specific to x86. Patch adds this support for powerpc as well.
Reviewed-by: Kajol Jain <[email protected]>
Reviewed-by: Namhyung Kim <[email protected]>
Signed-off-by: Athira Rajeev <[email protected]>
Tested-by: Kajol Jain <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Akanksha J N <[email protected]>
Cc: Christophe Leroy <[email protected]>
Cc: Disha Goel <[email protected]>
Cc: Hari Bathini <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Madhavan Srinivasan <[email protected]>
Cc: Segher Boessenkool <[email protected]>
Link: https://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
instruction tracking in powerpc
Data-type profiling has the concept of instruction tracking.
Example sequence in powerpc:
ld r10,264(r3)
mr r31,r3
<<after some sequence>
ld r9,312(r31)
or differently
lwz r10,264(r3)
add r31, r3, RB
lwz r9, 0(r31)
If a sample is hit at "lwz r9, 0(r31)", data type of r31 depends
on previous instruction sequence here. So to track the previous
instructions, patch adds changes to identify some of the arithmetic
instructions which are having opcode as 31.
Since memory instructions also has cases with opcode 31, use the bits
22:30 to filter the arithmetic instructions here.
Also there are instructions with just two operands like "addme", "addze".
This patch adds new instructions ops "arithmetic_ops" to handle this
Reviewed-by: Kajol Jain <[email protected]>
Reviewed-by: Namhyung Kim <[email protected]>
Signed-off-by: Athira Rajeev <[email protected]>
Tested-by: Kajol Jain <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Akanksha J N <[email protected]>
Cc: Christophe Leroy <[email protected]>
Cc: Disha Goel <[email protected]>
Cc: Hari Bathini <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Madhavan Srinivasan <[email protected]>
Cc: Segher Boessenkool <[email protected]>
Link: https://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
powerpc
There are memory instructions in powerpc with opcode as 31.
Example: "ldx RT,RA,RB" , Its X form is as below:
______________________________________
| 31 | RT | RA | RB | 21 |/|
--------------------------------------
0 6 11 16 21 30 31
The opcode for "ldx" is 31. There are other instructions also with
opcode 31 which are memory insn like ldux, stbx, lwzx, lhaux
But all instructions with opcode 31 are not memory. Example is add
instruction: "add RT,RA,RB"
The value in bit 21-30 [ 21 for ldx ] is different for these
instructions. Patch uses this value to assign instruction ops for these
cases. The naming convention and value to identify these are picked from
defines in "arch/powerpc/include/asm/ppc-opcode.h"
Reviewed-by: Kajol Jain <[email protected]>
Reviewed-by: Namhyung Kim <[email protected]>
Signed-off-by: Athira Rajeev <[email protected]>
Tested-by: Kajol Jain <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Akanksha J N <[email protected]>
Cc: Christophe Leroy <[email protected]>
Cc: Disha Goel <[email protected]>
Cc: Hari Bathini <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Madhavan Srinivasan <[email protected]>
Cc: Segher Boessenkool <[email protected]>
Link: https://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Use the raw instruction code and macros to identify memory instructions,
extract register fields and also offset.
The implementation addresses the D-form, X-form, DS-form instructions.
Two main functions are added.
New parse function "load_store__parse" as instruction ops parser for
memory instructions.
Unlike other parsers (like mov__parse), this one fills in the
"multi_regs" field for source/target and new added "mem_ref" field. No
other fields are set because, here there is no need to parse the
disassembled code and arch specific macros will take care of extracting
offset and regs which is easier and will be precise.
In powerpc, all instructions with a primary opcode from 32 to 63
are memory instructions. Update "ins__find" function to have "raw_insn"
also as a parameter.
Reviewed-by: Kajol Jain <[email protected]>
Reviewed-by: Namhyung Kim <[email protected]>
Signed-off-by: Athira Rajeev <[email protected]>
Tested-by: Kajol Jain <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Akanksha J N <[email protected]>
Cc: Christophe Leroy <[email protected]>
Cc: Disha Goel <[email protected]>
Cc: Hari Bathini <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Madhavan Srinivasan <[email protected]>
Cc: Segher Boessenkool <[email protected]>
Link: https://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
instruction on powerpc
Use the raw instruction code and macros to identify memory instructions,
extract register fields and also offset.
The implementation addresses the D-form, X-form, DS-form instructions.
Adds "mem_ref" field to check whether source/target has memory
reference.
Add function "get_powerpc_regs" which will set these fields: reg1, reg2,
offset depending of where it is source or target ops.
Update "parse" callback for "struct ins_ops" to also pass "struct
disasm_line" as argument. This is needed in parse functions where opcode
is used to determine whether to set multi_regs and other fields
Reviewed-by: Kajol Jain <[email protected]>
Reviewed-by: Namhyung Kim <[email protected]>
Signed-off-by: Athira Rajeev <[email protected]>
Tested-by: Kajol Jain <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Akanksha J N <[email protected]>
Cc: Christophe Leroy <[email protected]>
Cc: Disha Goel <[email protected]>
Cc: Hari Bathini <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Madhavan Srinivasan <[email protected]>
Cc: Segher Boessenkool <[email protected]>
Link: https://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
using dso__data_read_offset utility
Add support to capture and parse raw instruction in powerpc.
Currently, the perf tool infrastructure uses two ways to disassemble
and understand the instruction. One is objdump and other option is
via libcapstone.
Currently, the perf tool infrastructure uses "--no-show-raw-insn" option
with "objdump" while disassemble. Example from powerpc with this option
for an instruction address is:
Snippet from:
objdump --start-address=<address> --stop-address=<address> -d --no-show-raw-insn -C <vmlinux>
c0000000010224b4: lwz r10,0(r9)
This line "lwz r10,0(r9)" is parsed to extract instruction name,
registers names and offset. Also to find whether there is a memory
reference in the operands, "memory_ref_char" field of objdump is used.
For x86, "(" is used as memory_ref_char to tackle instructions of the
form "mov (%rax), %rcx".
In case of powerpc, not all instructions using "(" are the only memory
instructions. Example, above instruction can also be of extended form (X
form) "lwzx r10,0,r19". Inorder to easy identify the instruction category
and extract the source/target registers, patch adds support to use raw
instruction for powerpc. Approach used is to read the raw instruction
directly from the DSO file using "dso__data_read_offset" utility which
is already implemented in perf infrastructure in "util/dso.c".
Example:
38 01 81 e8 ld r4,312(r1)
Here "38 01 81 e8" is the raw instruction representation. In powerpc,
this translates to instruction form: "ld RT,DS(RA)" and binary code
as:
| 58 | RT | RA | DS | |
-------------------------------------
0 6 11 16 30 31
Function "symbol__disassemble_dso" is updated to read raw instruction
directly from DSO using dso__data_read_offset utility. In case of
above example, this captures:
line: 38 01 81 e8
The above works well when 'perf report' is invoked with only sort keys
for data type ie type and typeoff.
Because there is no instruction level annotation needed if only data
type information is requested for.
For annotating sample, along with type and typeoff sort key, "sym" sort
key is also needed. And by default invoking just "perf report" uses sort
key "sym" that displays the symbol information.
With approach changes in powerpc which first reads DSO for raw
instruction, "perf annotate" and "perf report" + a key breaks since
it doesn't do the instruction level disassembly.
Snippet of result from 'perf report':
Samples: 1K of event 'mem-loads', 4000 Hz, Event count (approx.): 937238
do_work /usr/bin/pmlogger [Percent: local period]
Percent│ ea230010
│ 3a550010
│ 3a600000
│ 38f60001
│ 39490008
│ 42400438
51.44 │ 81290008
│ 7d485378
Here, raw instruction is displayed in the output instead of human
readable annotated form.
One way to get the appropriate data is to specify "--objdump path", by
which code annotation will be done. But the default behaviour will be
changed. To fix this breakage, check if "sym" sort key is set. If so
fallback and use the libcapstone/objdump way of disassmbling the sample.
With the changes and "perf report"
Samples: 1K of event 'mem-loads', 4000 Hz, Event count (approx.): 937238
do_work /usr/bin/pmlogger [Percent: local period]
Percent│ ld r17,16(r3)
│ addi r18,r21,16
│ li r19,0
│ 8b0: rldicl r10,r10,63,33
│ addi r10,r10,1
│ mtctr r10
│ ↓ b 8e4
│ 8c0: addi r7,r22,1
│ addi r10,r9,8
│ ↓ bdz d00
51.44 │ lwz r9,8(r9)
│ mr r8,r10
│ cmpw r20,r9
Committer notes:
Just add the extern for 'sort_order' in disasm.c so that we don't end up
breaking the build due to this type colision with capstone and libbpf:
In file included from /usr/include/capstone/capstone.h:325,
from /git/perf-6.10.0/tools/perf/util/print_insn.h:23,
from builtin-script.c:38:
/usr/include/capstone/bpf.h:94:14: error: 'bpf_insn' defined as wrong kind of tag
94 | typedef enum bpf_insn {
I reported this to the bpf mailing list, see one of the links below.
Reviewed-by: Kajol Jain <[email protected]>
Reviewed-by: Namhyung Kim <[email protected]>
Signed-off-by: Athira Rajeev <[email protected]>
Tested-by: Kajol Jain <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Akanksha J N <[email protected]>
Cc: Christophe Leroy <[email protected]>
Cc: Disha Goel <[email protected]>
Cc: Hari Bathini <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Madhavan Srinivasan <[email protected]>
Cc: Segher Boessenkool <[email protected]>
Link: https://lore.kernel.org/lkml/[email protected]
Link: https://lore.kernel.org/bpf/ZqOltPk9VQGgJZAA@x1/T/#u
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|