aboutsummaryrefslogtreecommitdiff
path: root/tools/perf/util/util.h
AgeCommit message (Collapse)AuthorFilesLines
2009-11-11perf tools: Bring linear set of section headers for featuresFrederic Weisbecker1-0/+3
Build a set of section headers for features right after the datas. Each implemented feature will have one of such section header that provides the offset and the size of the data manipulated by the feature. The trace informations have moved after the data and are recorded on exit time. The new layout is as follows: ----------------------- ___ [ magic ] | [ header size ] | [ attr size ] | [ attr content offset ] | [ attr content size ] | [ data offset ] File Headers [ data size ] | [ event_types offset ] | [ event_types size ] | [ feature bitmap ] v [ attr section ] [ events section ] ___ [ X ] | [ X ] | [ X ] Datas [ X ] | [ X ] v ___ [ Feature 1 offset ] | [ Feature 1 size ] Features headers [ Feature 2 offset ] | [ Feature 2 size ] v [ Feature 1 content ] [ Feature 2 content ] ----------------------- We have as many feature's section headers as we have features in use for the current file. Say Feat 1 and Feat 3 are used by the file, but not Feat 2. Then the feature headers will be like follows: [ Feature 1 offset ] | [ Feature 1 size ] Features headers [ Feature 3 offset ] | [ Feature 3 size ] v There is no hole to cover Feature 2 that is not in use here. We only need to cover the needed headers in order, from the lowest feature bit to the highest. Currently we have two features: HEADER_TRACE_INFO and HEADER_BUILD_ID. Both have their contents that follow the feature headers. Putting the contents right after the feature headers is not mandatory though. While we keep the feature headers right after the data and in order, their offsets can point everywhere. We have just put the two above feature contents in the end of the file for convenience. The purpose of this layout change is to have a file format that scales while keeping it simple: having such linear feature headers is less error prone wrt forward/backward compatibility as the content of a feature can be put anywhere, its location can even change by the time, it's fine because its headers will tell where it is. And we know how to find these headers, following the above rules. Signed-off-by: Frederic Weisbecker <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Arnaldo Carvalho de Melo <[email protected]> Cc: Mike Galbraith <[email protected]> Cc: Paul Mackerras <[email protected]> Cc: Hitoshi Mitake <[email protected]> LKML-Reference: <[email protected]> Signed-off-by: Ingo Molnar <[email protected]>
2009-10-17perf: Add DIE_IF() macro for error checkingMasami Hiramatsu1-0/+9
Add DIE_IF() macro and replace ERR_IF() with it, and use linux/stringify.h. Signed-off-by: Masami Hiramatsu <[email protected]> Cc: Frederic Weisbecker <[email protected]> Cc: Arnaldo Carvalho de Melo <[email protected]> Cc: Steven Rostedt <[email protected]> Cc: Paul Mackerras <[email protected]> Cc: Peter Zijlstra <[email protected]> LKML-Reference: <[email protected]> Signed-off-by: Ingo Molnar <[email protected]>
2009-08-31Merge branch 'perfcounters/tracing' into perfcounters/coreIngo Molnar1-0/+1
Merge reason: this topic is ready now to merge into the main development branch for .32, with functional perf trace output. Signed-off-by: Ingo Molnar <[email protected]>
2009-08-18perf tools: Remove obsolete definesIngo Molnar1-4/+0
The _XOPEN_SOURCE* defines are not really needed on Linux and it's not like we'll port this to AIX ;-) The define also broke the build with gcc 4.4.1: CC util/trace-event-parse.o In file included from util/trace-event-parse.c:32: util/util.h:43:1: error: "_XOPEN_SOURCE" redefined So remove them. Cc: Peter Zijlstra <[email protected]> Cc: Mike Galbraith <[email protected]> Cc: Paul Mackerras <[email protected]> Cc: Arnaldo Carvalho de Melo <[email protected]> Cc: Frederic Weisbecker <[email protected]> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <[email protected]>
2009-08-17perf tools: Add perf traceFrederic Weisbecker1-0/+1
This adds perf trace into the set of perf tools. It is written to fetch the tracepoint samples from perf events and display them, according to the events information given by the debugfs files through the util/trace* tools. It is a rough first shot and doesn't yet handle the cpu, timestamps fields and some other things. Example: perf record -f -e workqueue:workqueue_execution:record -F 1 -a perf trace kblockd/0-236 [000] 0.000000: workqueue_execution: thread=:236 func=cfq_kick_queue+0x0 kondemand/0-360 [000] 0.000000: workqueue_execution: thread=:360 func=do_dbs_timer+0x0 kondemand/0-360 [000] 0.000000: workqueue_execution: thread=:360 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 Todo: - A lot of things! Signed-off-by: Frederic Weisbecker <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Arnaldo Carvalho de Melo <[email protected]> Cc: Mike Galbraith <[email protected]> Cc: "Luis Claudio R. Goncalves" <[email protected]> Cc: Clark Williams <[email protected]> Cc: Jon Masters <[email protected]> Cc: Mathieu Desnoyers <[email protected]> Cc: Christoph Hellwig <[email protected]> Cc: Xiao Guangrong <[email protected]> Cc: Zhaolei <[email protected]> Cc: Li Zefan <[email protected]> Cc: Lai Jiangshan <[email protected]> Cc: Masami Hiramatsu <[email protected]> Cc: Tom Zanussi <[email protected]> Cc: "Frank Ch. Eigler" <[email protected]> Cc: Roland McGrath <[email protected]> Cc: Jason Baron <[email protected]> Cc: Paul Mackerras <[email protected]> Cc: Jiaying Zhang <[email protected]> Cc: Anton Blanchard <[email protected]> LKML-Reference: <[email protected]> Signed-off-by: Ingo Molnar <[email protected]>
2009-08-12perf tools: Factorize the map helpersFrederic Weisbecker1-1/+0
Factorize the dso mapping helpers into a single purpose common file "util/map.c" Signed-off-by: Frederic Weisbecker <[email protected]> Cc: Arnaldo Carvalho de Melo <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Mike Galbraith <[email protected]> Cc: Brice Goglin <[email protected]>
2009-08-12perf tools: Factorize the event structure definitions in a single fileFrederic Weisbecker1-0/+2
Factorize the multiple definition of the events structures into a single util/event.h file. Signed-off-by: Frederic Weisbecker <[email protected]> Cc: Arnaldo Carvalho de Melo <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Mike Galbraith <[email protected]> Cc: Brice Goglin <[email protected]>
2009-07-22perf_counter: Add tracepoint support to perf list, perf statJason Baron1-0/+2
Add support to 'perf list' and 'perf stat' for kernel tracepoints. The implementation creates a 'for_each_subsystem' and 'for_each_event' for easy iteration over the tracepoints. Signed-off-by: Jason Baron <[email protected]> Signed-off-by: Peter Zijlstra <[email protected]> LKML-Reference: <426129bf9fcc8ee63bb094cf736e7316a7dcd77a.1248190728.git.jbaron@redhat.com>
2009-06-27perf_counter tools: Remove dead codeIngo Molnar1-15/+0
Vince Weaver reported that there's a handful of #ifdef __MINGW32__ sections in the code. Remove them as they are in essence dead code - as unlike upstream Git, the perf tool is unlikely to be ported to Windows. Reported-by: Vince Weaver <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Mike Galbraith <[email protected]> Cc: Paul Mackerras <[email protected]> Cc: Arnaldo Carvalho de Melo <[email protected]> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <[email protected]>
2009-06-18perf_counter tools: Add and use isprint()Peter Zijlstra1-11/+8
Introduce isprint() to print out raw event dumps to ASCII, etc. (This is an extension to upstream Git's ctype.c.) Signed-off-by: Peter Zijlstra <[email protected]> Cc: Mike Galbraith <[email protected]> Cc: Paul Mackerras <[email protected]> Cc: Arnaldo Carvalho de Melo <[email protected]> LKML-Reference: <new-submission> [ removed openssl.h inclusion from util.h - it leaked ctype.h ] Signed-off-by: Ingo Molnar <[email protected]>
2009-06-17perf_counter tools: Replace isprint() with issane()Peter Zijlstra1-0/+1
The Git utils came with a ctype replacement that doesn't provide isprint(). Add a replacement. Solves a build bug on certain distros. Signed-off-by: Peter Zijlstra <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Mike Galbraith <[email protected]> Cc: Paul Mackerras <[email protected]> Cc: Arnaldo Carvalho de Melo <[email protected]> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <[email protected]>
2009-06-06perf_counter tools: Move from Documentation/perf_counter/ to tools/perf/Ingo Molnar1-0/+410
Several people have suggested that 'perf' has become a full-fledged tool that should be moved out of Documentation/. Move it to the (new) tools/ directory. Cc: Peter Zijlstra <[email protected]> Cc: Mike Galbraith <[email protected]> Cc: Paul Mackerras <[email protected]> Cc: Arnaldo Carvalho de Melo <[email protected]> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.