| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Build a set of section headers for features right after the
datas. Each implemented feature will have one of such section
header that provides the offset and the size of the data
manipulated by the feature.
The trace informations have moved after the data and are
recorded on exit time.
The new layout is as follows:
-----------------------
___
[ magic ] |
[ header size ] |
[ attr size ] |
[ attr content offset ] |
[ attr content size ] |
[ data offset ] File Headers
[ data size ] |
[ event_types offset ] |
[ event_types size ] |
[ feature bitmap ] v
[ attr section ]
[ events section ]
___
[ X ] |
[ X ] |
[ X ] Datas
[ X ] |
[ X ] v
___
[ Feature 1 offset ] |
[ Feature 1 size ] Features headers
[ Feature 2 offset ] |
[ Feature 2 size ] v
[ Feature 1 content ]
[ Feature 2 content ]
-----------------------
We have as many feature's section headers as we have features in
use for the current file.
Say Feat 1 and Feat 3 are used by the file, but not Feat 2. Then
the feature headers will be like follows:
[ Feature 1 offset ] |
[ Feature 1 size ] Features headers
[ Feature 3 offset ] |
[ Feature 3 size ] v
There is no hole to cover Feature 2 that is not in use here. We
only need to cover the needed headers in order, from the lowest
feature bit to the highest.
Currently we have two features: HEADER_TRACE_INFO and
HEADER_BUILD_ID. Both have their contents that follow the
feature headers. Putting the contents right after the feature
headers is not mandatory though. While we keep the feature
headers right after the data and in order, their offsets can
point everywhere. We have just put the two above feature
contents in the end of the file for convenience.
The purpose of this layout change is to have a file format that
scales while keeping it simple: having such linear feature
headers is less error prone wrt forward/backward compatibility
as the content of a feature can be put anywhere, its location
can even change by the time, it's fine because its headers will
tell where it is. And we know how to find these headers,
following the above rules.
Signed-off-by: Frederic Weisbecker <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Arnaldo Carvalho de Melo <[email protected]>
Cc: Mike Galbraith <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Hitoshi Mitake <[email protected]>
LKML-Reference: <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
|
|
We were using eprintf in some places, that looks at a global
'verbose' level, and at other places passing a 'v' parameter to
specify the verbosity level, unify it by introducing
pr_{err,warning,debug,etc}, just like in the kernel.
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Mike Galbraith <[email protected]>
LKML-Reference: <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
|
|
Wrapping the kernel headers is dangerous when it comes to arch
headers. Once we wrap asm/types.h, it will also replace the
glibc asm/types.h, not only the kernel one.
This results in build errors on some machines.
Drop this wrapper and do its work from linux/types.h wrapper,
also the glibc asm/types.h can already handle most of the type
definition it was doing (typedef __u64, __u32, etc...).
Todo: Check the others asm/*.h wrappers to prevent from other
conflicts.
Reported-by: Ingo Molnar <[email protected]>
Signed-off-by: Frederic Weisbecker <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Arnaldo Carvalho de Melo <[email protected]>
Cc: Mike Galbraith <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Anton Blanchard <[email protected]>
LKML-Reference: <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
|
|
To cure a bunch of:
In file included from util/include/linux/bitmap.h:1,
from util/header.h:8,
from builtin-trace.c:7:
util/include/../../../../include/linux/bitmap.h:8:26: error:
linux/string.h: No such file or directory make: ***
[builtin-trace.o] Error 1 make: *** Waiting for unfinished
jobs....
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Acked-by: Frederic Weisbecker <[email protected]>
Cc: Steven Rostedt <[email protected]>
Cc: Peter Zijlstra <[email protected]>
LKML-Reference: <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
|
|
Use DECLARE_BITMAP instead of an open coded array for our bitmap
of featured sections.
This makes the array an unsigned long instead of a u64 but since
we use a 256 bits bitmap, the array size shouldn't vary between
different boxes.
Signed-off-by: Frederic Weisbecker <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Arnaldo Carvalho de Melo <[email protected]>
Cc: Mike Galbraith <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Steven Rostedt <[email protected]>
LKML-Reference: <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
|
|
Use the kernel bitmap library for internal perf tools uses.
Signed-off-by: Frederic Weisbecker <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Arnaldo Carvalho de Melo <[email protected]>
Cc: Mike Galbraith <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Steven Rostedt <[email protected]>
LKML-Reference: <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
|
|
Auto-adjust column width of perf report output to the
longest occuring string length.
Example:
[acme@doppio pahole]$ perf report --sort comm,dso,symbol | head -13
12.79% pahole /usr/lib64/libdw-0.141.so [.] __libdw_find_attr
8.90% pahole /lib64/libc-2.10.1.so [.] _int_malloc
8.68% pahole /usr/lib64/libdw-0.141.so [.] __libdw_form_val_len
8.15% pahole /lib64/libc-2.10.1.so [.] __GI_strcmp
6.80% pahole /lib64/libc-2.10.1.so [.] __tsearch
5.54% pahole ./build/libdwarves.so.1.0.0 [.] tag__recode_dwarf_type
[acme@doppio pahole]$
[acme@doppio pahole]$ perf report --sort comm,dso,symbol -d /lib64/libc-2.10.1.so | head -10
21.92% pahole /lib64/libc-2.10.1.so [.] _int_malloc
20.08% pahole /lib64/libc-2.10.1.so [.] __GI_strcmp
16.75% pahole /lib64/libc-2.10.1.so [.] __tsearch
[acme@doppio pahole]$
Also add these extra options to control the new behaviour:
-w, --field-width
Force each column width to the provided list, for large terminal
readability.
-t, --field-separator:
Use a special separator character and don't pad with spaces, replacing
all occurances of this separator in symbol names (and other output) with
a '.' character, that thus it's the only non valid separator.
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Mike Galbraith <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Paul Mackerras <[email protected]>
LKML-Reference: <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
|
|
The copy we were using came from another copy I did for the dwarves
(pahole) package, that came from the kernel years ago.
The only function that is used by the perf tools and that isn't in the
kernel is list_del_range, that I'm leaving in the perf tools only for
now.
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Mike Galbraith <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Paul Mackerras <[email protected]>
LKML-Reference: <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
|
|
The tools/perf/util/rbtree.c copy already drifted by three
csets:
4b324126e0c6c3a5080ca3ec0981e8766ed6f1ee
4c60117811171d867d4f27f17ea07d7419d45dae
16c047add3ceaf0ab882e3e094d1ec904d02312d
So remove the copy and use the lib/rbtree.c directly, sharing
the source code while still generating a separate object file,
since tools/perf uses a far more agressive -O6 switch.
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Cc: Mike Galbraith <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
LKML-Reference: <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
|