| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
With augmented_raw_syscalls transformed into a BPF skel made the output have a "
around the filenames, which is not what the old perf probe vfs_getname
method of obtaining filenames did, so accept the augmented way, with the
quotes.
At this point probably removing all the logic for the vfs_getname method
is in order, will do it at some point.
For now lets accept with/without quotes and make that test pass.
Cc: Adrian Hunter <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Link: https://lore.kernel.org/lkml/
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Running on fedora:38 in verbose mode I noticed:
# perf test -v 117
grep: warning: stray \ before /
117: Check open filename arg using perf trace + vfs_getname :
Remove that \ before /.
Cc: Adrian Hunter <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Link: https://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
To pick up the fixes that were just merged from perf-tools/perf-tools
for v6.5.
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
splitting/quoting and local variables
Running shellcheck on stat_std_output testcase throws
below warning:
In tests/shell/stat+std_output.sh line 9:
. $(dirname $0)/lib/stat_output.sh
^-----------^ SC2046 (warning): Quote this to prevent word splitting.
In tests/shell/stat+std_output.sh line 32:
local -i cnt=0
^-^ SC2034 (warning): cnt appears unused. Verify use (or export if used externally).
Fixed the warning by adding quotes to avoid word splitting
and removed unused variable "cnt" at line 32.
Signed-off-by: Athira Rajeev <[email protected]>
Acked-by: Ian Rogers <[email protected]>
Cc: Disha Goel <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kajol Jain <[email protected]>
Cc: Madhavan Srinivasan <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Running shellcheck on stat+csv_output.sh throws below
warning:
In tests/shell/stat+csv_output.sh line 9:
. $(dirname $0)/lib/stat_output.sh
^-----------^ SC2046 (warning): Quote this to prevent word splitting.
Fixed the warning by adding quotes to avoid word splitting.
Signed-off-by: Athira Rajeev <[email protected]>
Acked-by: Ian Rogers <[email protected]>
Cc: Disha Goel <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kajol Jain <[email protected]>
Cc: Madhavan Srinivasan <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Running shellcheck on stat_output.sh throws below warning:
In tests/shell/lib/stat_output.sh line 1:
^-- SC2148 (error): Tips depend on target shell and yours is unknown. Add a shebang or a 'shell' directive.
Fixed the warning by adding shell directive.
Signed-off-by: Kajol Jain <[email protected]>
Acked-by: Ian Rogers <[email protected]>
Cc: Disha Goel <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Madhavan Srinivasan <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Athira Rajeev <[email protected]>
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
word splitting/quoting
Running shellcheck on thread_loop_check_tid_2.sh throws below warning:
In tests/shell/coresight/thread_loop_check_tid_2.sh line 8:
. $(dirname $0)/../lib/coresight.sh
^-----------^ SC2046 (warning): Quote this to prevent word splitting.
Fixed the warning by adding quotes to avoid word splitting.
Signed-off-by: Kajol Jain <[email protected]>
Acked-by: Ian Rogers <[email protected]>
Cc: Disha Goel <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Madhavan Srinivasan <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Athira Rajeev <[email protected]>
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
splitting/quoting
Running shellcheck on record+zstd_comp_decomp.sh testcases
throws below warning:
In tests/shell/record+zstd_comp_decomp.sh line 16:
$perf_tool record -o $trace_file $gflag -z -F 5000 -- \
^---------^ SC2086 (info): Double quote to prevent globbing and word splitting.
Did you mean:
$perf_tool record -o "$trace_file" $gflag -z -F 5000 -- \
In tests/shell/record+zstd_comp_decomp.sh line 22:
$perf_tool report -i $trace_file --header --stats | \
^---------^ SC2086 (info): Double quote to prevent globbing and word splitting.
Added double quote around file names to fix these
shellcheck reported issues.
Signed-off-by: Athira Rajeev <[email protected]>
Acked-by: Ian Rogers <[email protected]>
Cc: Disha Goel <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kajol Jain <[email protected]>
Cc: Madhavan Srinivasan <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Running shellcheck in "lib/waiting.sh" generates below
warning:
In ./tools/perf/tests/shell/lib/waiting.sh line 1:
# SPDX-License-Identifier: GPL-2.0
^-- SC2148 (error): Tips depend on target shell and yours is unknown. Add a shebang or a 'shell' directive.
Fix this by adding shebang in the beginning of the script.
Signed-off-by: Athira Rajeev <[email protected]>
Acked-by: Ian Rogers <[email protected]>
Cc: Disha Goel <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kajol Jain <[email protected]>
Cc: Madhavan Srinivasan <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
shebang/local variables
Running shellcheck on probe_vfs_getname fails with below
warning:
In ./tools/perf/tests/shell/lib/probe_vfs_getname.sh line 1:
# Arnaldo Carvalho de Melo <[email protected]>, 2017
^-- SC2148 (error): Tips depend on target shell and yours is unknown. Add a shebang or a 'shell' directive.
In ./tools/perf/tests/shell/lib/probe_vfs_getname.sh line 14:
local verbose=$1
^-----------^ SC3043 (warning): In POSIX sh, 'local' is undefined.
Fix this:
- by adding shebang in the beginning of the file and
- rename variable verbose to "add_probe_verbose" after removing
local
Signed-off-by: Athira Rajeev <[email protected]>
Acked-by: Ian Rogers <[email protected]>
Cc: Disha Goel <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kajol Jain <[email protected]>
Cc: Madhavan Srinivasan <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
splitting/quoting
Fix the shellcheck warnings for unroll_loop_thread_10.sh
Add quotes to prevent word splitting which are caused by
unquoted command expansions.
Signed-off-by: Athira Rajeev <[email protected]>
Acked-by: Ian Rogers <[email protected]>
Cc: Disha Goel <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kajol Jain <[email protected]>
Cc: Madhavan Srinivasan <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
splitting/quoting
Fix the shellcheck warnings for thread_loop_check_tid_10.sh
In ./tools/perf/tests/shell/coresight/thread_loop_check_tid_10.sh line 8:
. $(dirname $0)/../lib/coresight.sh
^-----------^ SC2046 (warning): Quote this to prevent word splitting.
Add quotes to prevent word splitting which are caused by
unquoted command expansions.
Signed-off-by: Athira Rajeev <[email protected]>
Acked-by: Ian Rogers <[email protected]>
Cc: Disha Goel <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kajol Jain <[email protected]>
Cc: Madhavan Srinivasan <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Running shellcheck on probe.sh throws below warning:
In lib/probe.sh line 1:
^-- SC2148 (error): Tips depend on target shell and yours is unknown. Add a shebang or a 'shell' directive.
Fixed the warnings by adding shell directive.
Signed-off-by: Kajol Jain <[email protected]>
Acked-by: Ian Rogers <[email protected]>
Cc: Disha Goel <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Madhavan Srinivasan <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Athira Rajeev <[email protected]>
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
splitting/quote
Running shellcheck on memcpy_thread_16k_10.sh throws below warning:
In memcpy_thread_16k_10.sh line 8:
. $(dirname $0)/../lib/coresight.sh
^-----------^ SC2046 (warning): Quote this to prevent word splitting.
Fixed the warning by adding quotes to avoid word splitting.
ShellCheck result with patch:
# shellcheck -S warning coresight/memcpy_thread_16k_10.sh
#
Signed-off-by: Kajol Jain <[email protected]>
Acked-by: Ian Rogers <[email protected]>
Cc: Disha Goel <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Madhavan Srinivasan <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Athira Rajeev <[email protected]>
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Running shellcheck on asm_pure_loop.sh throws below warning:
In coresight/asm_pure_loop.sh line 8:
. $(dirname $0)/../lib/coresight.sh
^-----------^ SC2046 (warning): Quote this to prevent word splitting.
Fixed the warning by adding quotes to avoid word splitting.
ShellCheck result with patch:
# shellcheck -S warning coresight/asm_pure_loop.sh
#
Signed-off-by: Kajol Jain <[email protected]>
Acked-by: Ian Rogers <[email protected]>
Cc: Disha Goel <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Madhavan Srinivasan <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Athira Rajeev <[email protected]>
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Running shellcheck on stat+shadow_stat.sh generates below warning:
In tests/shell/stat+shadow_stat.sh line 48:
while read cpu num evt hash ipc rest
^--^ SC2034 (warning): hash appears unused. Verify use (or export if used externally).
This variable is intentionally unused since it is needed to parse
through the output. Use "_" as a prefix for this throw away variable.
Signed-off-by: Athira Rajeev <[email protected]>
Acked-by: Ian Rogers <[email protected]>
Cc: Disha Goel <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kajol Jain <[email protected]>
Cc: Madhavan Srinivasan <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Running shellcheck on stat_bpf_counter.sh generates below
warning:
In tests/shell/stat_bpf_counters.sh line 34:
if [ "$base_cycles" == "<not" ]; then
^-- SC3014 (warning): In POSIX sh, == in place of = is undefined.
In tests/shell/stat_bpf_counters.sh line 39:
if [ "$bpf_cycles" == "<not" ]; then
^-- SC3014 (warning): In POSIX sh, == in place of = is undefined.
Fix this by using "=" instead of "==" to work for
all shells.
Signed-off-by: Athira Rajeev <[email protected]>
Acked-by: Ian Rogers <[email protected]>
Cc: Disha Goel <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kajol Jain <[email protected]>
Cc: Madhavan Srinivasan <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Running shellcheck on test_perf_data_converter_json.sh throws
below warning:
In tests/shell/test_perf_data_converter_json.sh line 42:
if [ $(cat "${result}" | wc -l) -gt "0" ] ; then
^------------------------^ SC2046 (warning): Quote this to prevent word splitting.
Fixed the warning by adding quotes to avoid word splitting.
ShellCheck result with patch:
# shellcheck -S warning test_perf_data_converter_json.sh
#
Signed-off-by: Athira Rajeev <[email protected]>
Acked-by: Ian Rogers <[email protected]>
Cc: Disha Goel <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kajol Jain <[email protected]>
Cc: Madhavan Srinivasan <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
shellcheck
Running shellcheck on stat+csv_summary.sh throws below warnings:
In tests/shell/stat+csv_summary.sh line 26:
while read num event run pct
^-^ SC2034 (warning): num appears unused. Verify use (or export if used externally).
^---^ SC2034 (warning): event appears unused. Verify use (or export if used externally).
^-^ SC2034 (warning): run appears unused. Verify use (or export if used externally).
^-^ SC2034 (warning): pct appears unused. Verify use (or export if used externally).
These variables are intentionally unused since they are needed to parse
through the output. Use "_" as a prefix for these throw away variables.
Signed-off-by: Athira Rajeev <[email protected]>
Acked-by: Ian Rogers <[email protected]>
Cc: Disha Goel <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kajol Jain <[email protected]>
Cc: Madhavan Srinivasan <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Running shellcheck -S on test_arm_spe_fork.sh throws below warnings:
In tests/shell/test_arm_spe_fork.sh line 25:
trap cleanup_files exit term int
^--^ SC3049 (warning): In POSIX sh, using lower/mixed case for signal names is undefined.
^--^ SC3049 (warning): In POSIX sh, using lower/mixed case for signal names is undefined.
^-^ SC3049 (warning): In POSIX sh, using lower/mixed case for signal names is undefined.
Fixed this issue by using uppercase for "EXIT", "TERM" and
"INIT" signals to avoid using lower/mixed case for signal
names as input.
Signed-off-by: Athira Rajeev <[email protected]>
Acked-by: Ian Rogers <[email protected]>
Cc: Disha Goel <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kajol Jain <[email protected]>
Cc: Madhavan Srinivasan <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Running shellcheck on lock_contention.sh generates below warning:
In stat_bpf_counters_cgrp.sh line 28:
if [ -d /sys/fs/cgroup/system.slice -a -d /sys/fs/cgroup/user.slice ]; then
^-- SC2166 (warning): Prefer [ p ] && [ q ] as [ p -a q ] is not well defined.
In stat_bpf_counters_cgrp.sh line 34:
local self_cgrp=$(grep perf_event /proc/self/cgroup | cut -d: -f3)
^-------------^ SC3043 (warning): In POSIX sh, 'local' is undefined.
^-------^ SC2155 (warning): Declare and assign separately to avoid masking return values.
^-- SC2046 (warning): Quote this to prevent word splitting.
In stat_bpf_counters_cgrp.sh line 51:
local output
^----------^ SC3043 (warning): In POSIX sh, 'local' is undefined.
In stat_bpf_counters_cgrp.sh line 65:
local output
^----------^ SC3043 (warning): In POSIX sh, 'local' is undefined.
Fixed above warnings by:
- Changing the expression [p -a q] to [p] && [q].
- Fixing shellcheck warnings for local usage, by prefixing
function name to the variable.
Signed-off-by: Kajol Jain <[email protected]>
Acked-by: Ian Rogers <[email protected]>
Cc: Disha Goel <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Madhavan Srinivasan <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Athira Rajeev <[email protected]>
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
splitting
Running shellcheck on lock_contention.sh generates below warning:
In tests/shell/lock_contention.sh line 24:
if [ `id -u` != 0 ]; then
^-----^ SC2046 (warning): Quote this to prevent word splitting.
In tests/shell/lock_contention.sh line 160:
local type=$(head -1 "${result}" | awk '{ print $8 }' | sed -e 's/:.*//')
^--------^ SC3043 (warning): In POSIX sh, 'local' is undefined.
^--^ SC2155 (warning): Declare and assign separately to avoid masking return values.
^-- SC2046 (warning): Quote this to prevent word splitting.
Fixed above warnings by:
- Adding quotes to avoid word splitting.
- Fixing shellcheck warnings for local usage, by prefixing
function name to the variable.
Signed-off-by: Kajol Jain <[email protected]>
Acked-by: Ian Rogers <[email protected]>
Cc: Disha Goel <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Madhavan Srinivasan <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Athira Rajeev <[email protected]>
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
splitting/quoting and signal names case
Running shellcheck on record_offcpu.sh throws below warning:
In tests/shell/record_offcpu.sh line 13:
trap - exit term int
^--^ SC3049 (warning): In POSIX sh, using lower/mixed case for signal names is undefined.
^--^ SC3049 (warning): In POSIX sh, using lower/mixed case for signal names is undefined.
^-^ SC3049 (warning): In POSIX sh, using lower/mixed case for signal names is undefined.
In tests/shell/record_offcpu.sh line 20:
trap trap_cleanup exit term int
^--^ SC3049 (warning): In POSIX sh, using lower/mixed case for signal names is undefined.
^--^ SC3049 (warning): In POSIX sh, using lower/mixed case for signal names is undefined.
^-^ SC3049 (warning): In POSIX sh, using lower/mixed case for signal names is undefined.
In tests/shell/record_offcpu.sh line 25:
if [ `id -u` != 0 ]
^-----^ SC2046 (warning): Quote this to prevent word splitting.
Fixed the warnings by:
- Capitalize signals(INT, TERM, EXIT) to avoid mixed/lower case naming of
signals.
- Adding quotes to avoid word splitting.
Result from shellcheck after patch changes:
$ shellcheck -S warning record_offcpu.sh
$
Signed-off-by: Kajol Jain <[email protected]>
Acked-by: Ian Rogers <[email protected]>
Cc: Disha Goel <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Madhavan Srinivasan <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Athira Rajeev <[email protected]>
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
splitting/quoting
Running shellcheck on probe_vfs_getname.sh throws below warning:
In tests/shell/probe_vfs_getname.sh line 7:
. $(dirname $0)/lib/probe.sh
^-----------^ SC2046 (warning): Quote this to prevent word splitting.
In tests/shell/probe_vfs_getname.sh line 11:
. $(dirname $0)/lib/probe_vfs_getname.sh
^-----------^ SC2046 (warning): Quote this to prevent word splitting.
Fixed the warning by adding quotes to avoid word splitting.
ShellCheck result with patch:
# shellcheck -S warning probe_vfs_getname.sh
#
Signed-off-by: Kajol Jain <[email protected]>
Acked-by: Ian Rogers <[email protected]>
Cc: Disha Goel <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Madhavan Srinivasan <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Athira Rajeev <[email protected]>
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
splitting/quoting
Running shellcheck -S on probe_vfs_getname.sh, throws below warnings:
Before fix:
$ shellcheck -S warning trace+probe_vfs_getname.sh
In trace+probe_vfs_getname.sh line 13:
. $(dirname $0)/lib/probe.sh
^-----------^ SC2046 (warning): Quote this to prevent word splitting.
In trace+probe_vfs_getname.sh line 18:
. $(dirname $0)/lib/probe_vfs_getname.sh
^-----------^ SC2046 (warning): Quote this to prevent word splitting.
In trace+probe_vfs_getname.sh line 21:
evts=$(echo $(perf list syscalls:sys_enter_open* 2>/dev/null | grep -E 'open(at)? ' | sed -r 's/.*sys_enter_([a-z]+) +\[.*$/\1/') | sed 's/ /,/')
^-- SC2046 (warning): Quote this to prevent word splitting.
Fix the shellcheck warnings by adding quotes to prevent word splitting.
Signed-off-by: Akanksha J N <[email protected]>
Acked-by: Ian Rogers <[email protected]>
Cc: Disha Goel <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Madhavan Srinivasan <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Athira Rajeev <[email protected]>
Signed-off-by: Kajol Jain <[email protected]>
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Currently we depend on output of 'perf record -e "sched:sched_switch"', to
check whether perf was built with libtraceevent support.
Instead, a more straightforward approach can be to check the build options,
using 'perf version --build-options', to check for libtraceevent support.
When perf is compiled WITHOUT libtraceevent ('make NO_LIBTRACEEVENT=1'),
'perf version --build-options' outputs (output trimmed):
...
libtraceevent: [ OFF ] # HAVE_LIBTRACEEVENT
...
While, when perf is compiled WITH libtraceevent,
'perf version --build-options' outputs:
...
libtraceevent: [ on ] # HAVE_LIBTRACEEVENT
...
Committer notes:
Removed one grep in the pipleline by combining the two into just one
expression that covers the OFF + HAVE_LIBTRACEEVENT.
Suggested-by: Ian Rogers <[email protected]>
Signed-off-by: Aditya Gupta <[email protected]>
Cc: Athira Rajeev <[email protected]>
Cc: Disha Goel <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kajol Jain <[email protected]>
Cc: Madhavan Srinivasan <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Without gcc, the test will fail.
On cleanup, ignore probe removal errors. Otherwise, in case of an error
adding the probe, the temporary directory is not removed.
Fixes: 56cbeacf14353057 ("perf probe: Add test for regression introduced by switch to die_get_decl_file()")
Signed-off-by: Georg Müller <[email protected]>
Acked-by: Ian Rogers <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Georg Müller <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Masami Hiramatsu <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Link: https://lore.kernel.org/r/CAP-5=fUP6UuLgRty3t2=fQsQi3k4hDMz415vWdp1x88QMvZ8ug@mail.gmail.com/
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
This patch adds a test to validate that 'perf probe' works for binaries
where DWARF info is split into multiple CUs
Signed-off-by: Georg Müller <[email protected]>
Acked-by: Masami Hiramatsu (Google) <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: [email protected]
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
To verify CSV output, just check the number of separators (",") using
the tr and wc commands like this.
grep -v "^#" ${result} | tr -d -c | wc -c
Now it expects 6 columns (and 5 separators) in the output, but it may
be changed later so count the field in the header first and compare it
to the actual output lines.
$ cat ${result}
# output: contended, total wait, max wait, avg wait, type, caller
1, 28787, 28787, 28787, spinlock, raw_spin_rq_lock_nested+0x1b
The test looks like below now:
$ sudo ./perf test -v contention
86: kernel lock contention analysis test :
--- start ---
test child forked, pid 2705822
Testing perf lock record and perf lock contention
Testing perf lock contention --use-bpf
Testing perf lock record and perf lock contention at the same time
Testing perf lock contention --threads
Testing perf lock contention --lock-addr
Testing perf lock contention --type-filter (w/ spinlock)
Testing perf lock contention --lock-filter (w/ tasklist_lock)
Testing perf lock contention --callstack-filter (w/ unix_stream)
Testing perf lock contention --callstack-filter with task aggregation
Testing perf lock contention CSV output
test child finished with 0
---- end ----
kernel lock contention analysis test: Ok
Acked-by: Ian Rogers <[email protected]>
Cc: Hao Luo <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Arnaldo Carvalho de Melo <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Song Liu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Namhyung Kim <[email protected]>
|
|
This test checks if the output of perf stat to match event names and
metrics. So it wants the output lines to have both event name and
metric. Otherwise it should skip the line.
On AMD machines, the instruction event has two metrics and they are printed
in separate lines. It makes the line without event name like below:
# perf stat -a sleep 1
Performance counter stats for 'system wide':
64,383.34 msec cpu-clock # 64.048 CPUs utilized
14,526 context-switches # 225.617 /sec
112 cpu-migrations # 1.740 /sec
190 page-faults # 2.951 /sec
807,558,652 cycles # 0.013 GHz (83.30%)
69,809,799 stalled-cycles-frontend # 8.64% frontend cycles idle (83.30%)
196,983,266 stalled-cycles-backend # 24.39% backend cycles idle (83.30%)
424,876,008 instructions # 0.53 insn per cycle
(here) ---> # 0.46 stalled cycles per insn (83.30%)
97,788,321 branches # 1.519 M/sec (83.34%)
4,147,377 branch-misses # 4.24% of all branches (83.46%)
1.005241409 seconds time elapsed
Also modern Intel machines have TopDown metrics which also don't have
event names.
# perf stat -a sleep 1
Performance counter stats for 'system wide':
8,015.39 msec cpu-clock # 7.996 CPUs utilized
5,823 context-switches # 726.477 /sec
189 cpu-migrations # 23.580 /sec
139 page-faults # 17.342 /sec
435,139,308 cycles # 0.054 GHz
193,891,345 instructions # 0.45 insn per cycle
42,773,028 branches # 5.336 M/sec
2,298,113 branch-misses # 5.37% of all branches
TopdownL1 # 25.5 % tma_backend_bound
/--> # 7.9 % tma_bad_speculation
(here) --+ # 55.7 % tma_frontend_bound
\--> # 10.9 % tma_retiring
1.002395924 seconds time elapsed
There is a check to skip TopdownL1 and TopdownL2 specifically but it
does not cover every affected lines.
So there is another check to skip the line if it has nothing on the left
side of # sign. Well.. it seems ok but that's not enough too.
When aggregation mode (like --per-socket or --per-thread) is used, it
adds some prefix (e.g. CPU socket, task name and PID) in the output
line. So the test code ignores them to normalize result.
A problem can happen for per-thread mode when task name contains one or
more spaces. It'd only ignore the first part of the task name, and it
thinks there's something more in the line so it would not skip.
# perf stat -a --perf-thread sleep 1
...
perf-21276 # 70.2 % tma_backend_bound
perf-21276 # 3.9 % tma_bad_speculation
perf-21276 # 10.5 % tma_frontend_bound
perf-21276 # 15.3 % tma_retiring
^^^^^^^^^^
(ignored)
my task-21328 # 70.2 % tma_backend_bound
my task-21328 # 3.9 % tma_bad_speculation
my task-21328 # 10.5 % tma_frontend_bound
my task-21328 # 15.3 % tma_retiring
^^
(ignored)
So I think it should look at the metric names instead. Add skip_metric
to hold the list of names to skip. It would contain 'stalled cycles per
insn' and metrics started by 'tma_'.
Fixes: 99a04a48f225 ("perf test: Add test case for the standard 'perf stat' output")
Acked-by: Ian Rogers <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Arnaldo Carvalho de Melo <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Ingo Molnar <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Namhyung Kim <[email protected]>
|
|
On AMD machines, the perf stat STD output test failed like below:
$ sudo ./perf test -v 98
98: perf stat STD output linter :
--- start ---
test child forked, pid 1841901
Checking STD output: no argswrong event metric.
expected 'GHz' in 108,121 stalled-cycles-frontend # 10.88% frontend cycles idle
test child finished with -1
---- end ----
perf stat STD output linter: FAILED!
This is because there are stalled-cycles-{frontend,backend} events are
used by default. The current logic checks the event_name array to find
which event it's running. But 'cycles' event comes before those stalled
cycles event and it matches first. So it tries to find 'GHz' metric
in the output (which is for the 'cycles') and fails.
Move the stalled-cycles-{frontend,backend} events before 'cycles' so
that it can find the stalled cycles events first.
Also add a space after 'no args' test name for consistency.
Fixes: 99a04a48f225 ("perf test: Add test case for the standard 'perf stat' output")
Acked-by: Ian Rogers <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Arnaldo Carvalho de Melo <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Ingo Molnar <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Namhyung Kim <[email protected]>
|
|
The task-analyzer.py script (actually every other scripts too) requires
PERF_EXEC_PATH env to find dependent libraries and scripts. For scripts
test to run correctly, it needs to set PERF_EXEC_PATH to the perf tool
source directory.
Instead of blindly update the env, let's check the directory structure
to make sure it points to the correct location.
Fixes: e8478b84d6ba ("perf test: add new task-analyzer tests")
Cc: Petar Gligoric <[email protected]>
Cc: Hagen Paul Pfeifer <[email protected]>
Cc: Aditya Gupta <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Arnaldo Carvalho de Melo <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Ingo Molnar <[email protected]>
Acked-by: Ian Rogers <[email protected]>
Signed-off-by: Namhyung Kim <[email protected]>
|
|
$TEST_PROGRAM is a command with spaces so it's supposed to be word
split. The referenced fix to fix the shellcheck warnings incorrectly
quoted this string so unquote it to fix the test.
At the same time silence the shellcheck warning for that line and fix
two more shellcheck errors at the end of the script.
Fixes: 1bb17b4c6c91 ("perf tests arm_callgraph_fp: Address shellcheck warnings about signal names and adding double quotes for expression")
Signed-off-by: James Clark <[email protected]>
Acked-by: Namhyung Kim <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: [email protected]
Cc: Peter Zijlstra <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Arnaldo Carvalho de Melo <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kajol Jain <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Athira Rajeev <[email protected]>
Cc: Ingo Molnar <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Namhyung Kim <[email protected]>
|
|
The commit fc51fc87b1b8 factored out the helper functions to a library
but the new file had execute permission. Due to the way it detects
the shell test scripts, it showed up in the perf test list unexpectedly.
$ ./perf test list 2>&1 | grep 86
76: x86 bp modify
77: x86 Sample parsing
78: x86 hybrid
86: <---- (here)
$ ./perf test -v 86
86: :
--- start ---
test child forked, pid 1932207
test child finished with 0
---- end ----
: Ok
As it's a collection of library functions, it should not run as is.
Let's remove the execute permission.
Fixes: fc51fc87b1b8 ("perf test: Move all the check functions of stat CSV output to lib")
Acked-by: Ian Rogers <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Arnaldo Carvalho de Melo <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Ingo Molnar <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Namhyung Kim <[email protected]>
|
|
Rerun failed metrics with longer workload to avoid false failure because
sometimes metric value test fails when running in very short amount of
time. Skip rerun if equal to or more than 20 metrics fail.
Signed-off-by: Weilin Wang <[email protected]>
Tested-by: Namhyung Kim <[email protected]>
Cc: [email protected]
Cc: Ian Rogers <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Caleb Biggers <[email protected]>
Cc: Perry Taylor <[email protected]>
Cc: Samantha Alt <[email protected]>
Cc: Arnaldo Carvalho de Melo <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Ingo Molnar <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Namhyung Kim <[email protected]>
|
|
Add skip list for metrics known would fail because some of the metrics are
very likely to fail due to multiplexing or other errors. So add all of the
flaky tests into the skip list.
Signed-off-by: Weilin Wang <[email protected]>
Tested-by: Namhyung Kim <[email protected]>
Cc: [email protected]
Cc: Ian Rogers <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Caleb Biggers <[email protected]>
Cc: Perry Taylor <[email protected]>
Cc: Samantha Alt <[email protected]>
Cc: Arnaldo Carvalho de Melo <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Ingo Molnar <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Namhyung Kim <[email protected]>
|
|
Add metric value validation test to check if metric values are with in
correct value ranges. There are three types of tests included: 1)
positive-value test checks if all the metrics collected are non-negative;
2) single-value test checks if the list of metrics have values in given
value ranges; 3) relationship test checks if multiple metrics follow a
given relationship, e.g. memory_bandwidth_read + memory_bandwidth_write =
memory_bandwidth_total.
Signed-off-by: Weilin Wang <[email protected]>
Tested-by: Namhyung Kim <[email protected]>
Cc: [email protected]
Cc: Ian Rogers <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Caleb Biggers <[email protected]>
Cc: Perry Taylor <[email protected]>
Cc: Samantha Alt <[email protected]>
Cc: Arnaldo Carvalho de Melo <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Ingo Molnar <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Namhyung Kim <[email protected]>
|
|
obsolescent "fgrep"
There exists the following warning when executing 'perf test record+probe_libc_inet_pton.sh':
fgrep: warning: fgrep is obsolescent; using grep -F
This is tested on Fedora 38, the version of grep is 3.8, the latest
version of grep claims the fgrep is obsolete, use "grep -F" instead of
"fgrep" to silence the warning.
Signed-off-by: Tiezhu Yang <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Add a new test case to verify the standard 'perf stat' output with
different options.
Reviewed-by: Ian Rogers <[email protected]>
Signed-off-by: Kan Liang <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Ahmad Yasin <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
These functions can be shared with the stat std output test.
There is no functional change.
Reviewed-by: Ian Rogers <[email protected]>
Signed-off-by: Kan Liang <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Ahmad Yasin <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
There may be multiplexing triggered, e.g., e-core of ADL.
Reviewed-by: Ian Rogers <[email protected]>
Signed-off-by: Kan Liang <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Ahmad Yasin <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
A new field metricgroup has been added in the perf stat JSON output.
Support it in the test case.
Signed-off-by: Kan Liang <[email protected]>
Acked-by: Ian Rogers <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Ahmad Yasin <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Test "perf script task-analyzer tests" fails in environment with missing
libtraceevent support, as perf record fails to create the perf.data
file, which further tests depend on.
Instead, when perf is not compiled with libtraceevent support, skip
those tests instead of failing them, by checking the output of `perf
record --dry-run` to see if it prints the error "libtraceevent is
necessary for tracepoint support"
For the following output, perf compiled with: `make NO_LIBTRACEEVENT=1`
Before the patch:
108: perf script task-analyzer tests :
test child forked, pid 24105
failed to open perf.data: No such file or directory (try 'perf record' first)
FAIL: "invokation of perf script report task-analyzer command failed" Error message: ""
FAIL: "test_basic" Error message: "Failed to find required string:'Comm'."
failed to open perf.data: No such file or directory (try 'perf record' first)
FAIL: "invokation of perf script report task-analyzer --ns --rename-comms-by-tids 0:random command failed" Error message: ""
FAIL: "test_ns_rename" Error message: "Failed to find required string:'Comm'."
failed to open perf.data: No such file or directory (try 'perf record' first)
<...>
perf script task-analyzer tests: FAILED!
With this patch, the script instead returns 2 signifying SKIP, and after
the patch:
108: perf script task-analyzer tests :
test child forked, pid 26010
libtraceevent is necessary for tracepoint support
WARN: Skipping tests. No libtraceevent support
test child finished with -2
perf script task-analyzer tests: Skip
Fixes: e8478b84d6ba9ccf ("perf test: Add new task-analyzer tests")
Signed-off-by: Aditya Gupta <[email protected]>
Cc: Disha Goel <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: John Garry <[email protected]>
Cc: Madhavan Srinivasan <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Petar Gligoric <[email protected]>
Cc: Ravi Bangoria <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Athira Rajeev <[email protected]>
Signed-off-by: Kajol Jain <[email protected]>
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Instead of printing "perf command failed" everytime, print the exact
command that run earlier
Signed-off-by: Aditya Gupta <[email protected]>
Acked-by: Hagen Paul Pfeifer <[email protected]>
Cc: Disha Goel <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: John Garry <[email protected]>
Cc: Madhavan Srinivasan <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Ravi Bangoria <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Athira Rajeev <[email protected]>
Signed-off-by: Kajol Jain <[email protected]>
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
${$1} gives bad substitution error on sh, bash, and zsh. This seems like
a typo, and this patch modifies it to $1, since that is what it's usage
looks like from wherever `check_exec_0` is called.
This issue due to ${$1} caused all function calls to give error in
`find_str_or_fail` line, and so no test runs completely. But
'perf test "perf script task-analyzer tests"' wrongly reports
that tests passed with the status OK, which is wrong considering
the tests didn't even run completely
Fixes: e8478b84d6ba9ccf ("perf test: add new task-analyzer tests")
Signed-off-by: Aditya Gupta <[email protected]>
Signed-off-by: Athira Rajeev <[email protected]>
Signed-off-by: Kajol Jain <[email protected]>
Cc: Disha Goel <[email protected]>
Cc: Hagen Paul Pfeifer <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: John Garry <[email protected]>
Cc: Madhavan Srinivasan <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Petar Gligoric <[email protected]>
Cc: Ravi Bangoria <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Running shellcheck -S on stat+shadow_stat.sh testcase, generates
SC2046 and SC2034 warnings,
$ shellcheck -S warning tests/shell/stat+shadow_stat.sh
res=`printf "%.2f" $(echo "scale=6; $num / $cyc" | bc -q)`
: Quote this to prevent word splitting
To address the POSIX shell warnings used quotes in the printf
expressions, to prevent word splitting.
Signed-off-by: Spoorthy S <[email protected]>
Cc: Disha Goel <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: John Garry <[email protected]>
Cc: Madhavan Srinivasan <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Ravi Bangoria <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Athira Rajeev <[email protected]>
Signed-off-by: Kajol Jain <[email protected]>
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Fix all the POSIX sh warnings in perf shell test test_brstack.sh
Warnings fixed :
* In POSIX sh, using lower/mixed case for signal names is undefined.
Correcting that in this script.
* In POSIX sh, 'local' is undefined.
local is supported in many shells, but it's not in POSIX.
In POSIX sh, you can adopt some convention to avoid accidentally
overwriting variables names, e.g. prefixing with the function name,
that is what I have done here.
Signed-off-by: Geetika <[email protected]>
Cc: Disha Goel <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: John Garry <[email protected]>
Cc: Madhavan Srinivasan <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Ravi Bangoria <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Athira Rajeev <[email protected]>
Signed-off-by: Kajol Jain <[email protected]>
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Fixed the shellcheck warnings in buildid.sh, record+probe_libc_inet_pton.sh
and record+script_probe_vfs_getname.sh perf shell scripts:
1. Prefer [ p ] && [ q ] as [ p -a q ] is not well defined.
2. Prefer [ p ] || [ q ] as [ p -o q ] is not well defined.
3. Used * argument to avoid the argument mixes string and array
4. Resolved issue for variable refernce, where the variable is
being used before it has been initialized.
5. Resolved word splitting issue (syntax error).
6. The "err" variable has been removed from buildid.sh since
it is not used anywhere in the code.
Signed-off-by: Samir Mulani <[email protected]>
Cc: Disha Goel <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: John Garry <[email protected]>
Cc: Madhavan Srinivasan <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Ravi Bangoria <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Athira Rajeev <[email protected]>
Signed-off-by: Kajol Jain <[email protected]>
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Use quotes around variables to prevent POSIX word expansion, use
uppercase for signals(INT, TERM, EXIT) to avoid mixed/lower case naming
of signals and replace "==" with "=" as "==" is not supported by POSIX
shell.
Signed-off-by: Abhirup Deb <[email protected]>
Cc: Disha Goel <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: John Garry <[email protected]>
Cc: Madhavan Srinivasan <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Ravi Bangoria <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anushree Mathur <[email protected]>
Signed-off-by: Athira Rajeev <[email protected]>
Signed-off-by: Kajol Jain <[email protected]>
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Running shellcheck -S on test_arm_spe.sh throws below warnings:
#shellcheck -S warning tests/shell/test_arm_spe.sh
In tests/shell/test_arm_spe.sh line 30:
trap cleanup_files exit term int
^--^ SC3049 (warning): In POSIX sh, using lower/mixed case for signal names is undefined.
^--^ SC3049 (warning): In POSIX sh, using lower/mixed case for signal names is undefined.
^-^ SC3049 (warning): In POSIX sh, using lower/mixed case for signal names is undefined.
Fixed this issue by using uppercase for "EXIT", "TERM" and
"INIT" signals to avoid using lower/mixed case for signal
names as input.
Signed-off-by: Abhirup Deb <[email protected]>
Cc: Disha Goel <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: John Garry <[email protected]>
Cc: Madhavan Srinivasan <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Ravi Bangoria <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Athira Rajeev <[email protected]>
Signed-off-by: Kajol Jain <[email protected]>
Signed-off-by: Mukesh Chaurasiya <[email protected]>
Signed-off-by: Ojaswin Mujoo <[email protected]>
Signed-off-by: Piyush Sachdeva <[email protected]>
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|