| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
No need to use strbuf there, its just a simple alloc+formatting, which
asprintf does just fine.
Cc: Adrian Hunter <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Wang Nan <[email protected]>
Link: http://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Setting libapi debug output functions to use perf functions.
Signed-off-by: Jiri Olsa <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Currently perf report only shows a help message "For a higher level
overview, try: perf report --sort comm,dso" unconditionally (even if
the sort keys were used). Add more help tips and show randomly.
Load tips from ${prefix}/share/doc/perf-tip/tips.txt file.
$ perf report | tail
0.10% swapper [kernel.vmlinux] [k] irq_exit
0.09% swapper [kernel.vmlinux] [k] flush_smp_call_function_queue
0.08% swapper [kernel.vmlinux] [k] native_write_msr_safe
0.03% swapper [kernel.vmlinux] [k] group_sched_in
0.01% perf [kernel.vmlinux] [k] native_write_msr_safe
#
# (Tip: Search options using a keyword: perf report -h <keyword>)
#
Signed-off-by: Namhyung Kim <[email protected]>
Acked-by: Ingo Molnar <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Masami Hiramatsu <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: Wang Nan <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
[ Renamed it to perf_tip() and the parameter dirname to dirpath to fix the build on older distros ]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Move the subcommand-related files from perf to a new library named
libsubcmd.a.
Since we're moving files anyway, go ahead and rename 'exec_cmd.*' to
'exec-cmd.*' to be consistent with the naming of all the other files.
Signed-off-by: Josh Poimboeuf <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/c0a838d4c878ab17fee50998811612b2281355c1.1450193761.git.jpoimboe@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
In preparation for moving exec_cmd.c and run-command.c out of perf and
into a library, remove 'perf' from all the symbol names.
Signed-off-by: Josh Poimboeuf <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/bc3ee82b40b8f396b644fa49e0f7260ce442635b.1450193761.git.jpoimboe@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Create init functions for exec_cmd.c and pager.c. This allows their
configuration to be specified at runtime so they can be split out into a
separate library which can be used by other programs. Their
configuration is stored in a shared subcmd_config struct.
Signed-off-by: Josh Poimboeuf <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/21f5f6b38da72c985a8dcfa185700d03e7eecd1d.1450193761.git.jpoimboe@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
perf_env__set_cmdline() only saves the arguments the first time it's
called. It doesn't need to be called every time the options and
suboptions are parsed. Instead it can just be called once.
This also has the advantage of making the option parsing code less
perf-specific so it can be moved out to a library.
Signed-off-by: Josh Poimboeuf <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/19b76a5aa1b688bd635bd65d80bbc103a978d75e.1449548395.git.jpoimboe@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The perf configuration file contains many variables to change various
aspects of each of its tools, including output, disk usage, etc.
But looking at the state of configuration is difficult and there's no
documentation about config variables except for the variables in
perfconfig.example exist.
So this patch adds a 'perf-config' command with a '--list' option.
perf config [options]
display current perf config variables.
# perf config -l | --list
Signed-off-by: Taeung Song <[email protected]>
Acked-by: Namhyung Kim <[email protected]>
Cc: Jiri Olsa <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
By introducing new rules in tools/perf/util/parse-events.[ly], this
patch enables 'perf record --event bpf_file.o' to select events by an
eBPF object file. It calls parse_events_load_bpf() to load that file,
which uses bpf__prepare_load() and finally calls bpf_object__open() for
the object files.
After applying this patch, commands like:
# perf record --event foo.o sleep
become possible.
However, at this point it is unable to link any useful things onto the
evsel list because the creating of probe points and BPF program
attaching have not been implemented. Before real events are possible to
be extracted, to avoid perf report error because of empty evsel list,
this patch link a dummy evsel. The dummy event related code will be
removed when probing and extracting code is ready.
Commiter notes:
Using it:
$ ls -la foo.o
ls: cannot access foo.o: No such file or directory
$ perf record --event foo.o sleep
libbpf: failed to open foo.o: No such file or directory
event syntax error: 'foo.o'
\___ BPF object file 'foo.o' is invalid
(add -v to see detail)
Run 'perf list' for a list of valid events
Usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
-e, --event <event> event selector. use 'perf list' to list available events
$
$ file /tmp/build/perf/perf.o
/tmp/build/perf/perf.o: ELF 64-bit LSB relocatable, x86-64, version 1 (SYSV), not stripped
$ perf record --event /tmp/build/perf/perf.o sleep
libbpf: /tmp/build/perf/perf.o is not an eBPF object file
event syntax error: '/tmp/build/perf/perf.o'
\___ BPF object file '/tmp/build/perf/perf.o' is invalid
(add -v to see detail)
Run 'perf list' for a list of valid events
Usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
-e, --event <event> event selector. use 'perf list' to list available events
$
$ file /tmp/foo.o
/tmp/foo.o: ELF 64-bit LSB relocatable, no machine, version 1 (SYSV), not stripped
$ perf record --event /tmp/foo.o sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.013 MB perf.data ]
$ perf evlist
/tmp/foo.o
$ perf evlist -v
/tmp/foo.o: type: 1, size: 112, config: 0x9, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|PERIOD, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1, enable_on_exec: 1, task: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1
$
So, type 1 is PERF_TYPE_SOFTWARE, config 0x9 is PERF_COUNT_SW_DUMMY, ok.
$ perf report --stdio
Error:
The perf.data file has no samples!
# To display the perf.data header info, please use --header/--header-only options.
#
$
Signed-off-by: Wang Nan <[email protected]>
Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Cc: Alexei Starovoitov <[email protected]>
Cc: Brendan Gregg <[email protected]>
Cc: Daniel Borkmann <[email protected]>
Cc: David Ahern <[email protected]>
Cc: He Kuang <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kaixu Xia <[email protected]>
Cc: Masami Hiramatsu <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Zefan Li <[email protected]>
Cc: [email protected]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Adding handling for '-h' and '-v' options to invoke help and version
command respectively.
Current behaviour is:
$ perf -v
Unknown option: -v
Usage: perf [--version] [--help] [OPTIONS] COMMAND [ARGS]
$ perf -h
Unknown option: -h
Usage: perf [--version] [--help] [OPTIONS] COMMAND [ARGS]
New behaviour:
$ perf -h
usage: perf [--version] [--help] [OPTIONS] COMMAND [ARGS]
The most commonly used perf commands are:
annotate Read perf.data (created by perf record) and display annotated code
archive Create archive with object files with build-ids found in perf.data file
bench General framework for benchmark suites
...
$ perf -v
perf version 4.3.rc3.gc99e32
Updated man page.
Requested-by: Peter Zijlstra <[email protected]>
Signed-off-by: Jiri Olsa <[email protected]>
Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Don Zickus <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Out of the code to write the cpu topology map in the perf.data file
header.
Now if one needs the CPU topology map for the running machine, one needs
to call perf_env__read_cpu_topology_map(perf_env) and the info will be
stored in perf_env.cpu.
For now we're using a global perf_env variable, that will have its
contents freed after we run a builtin.
v2: Check perf_env__read_cpu_topology_map() return in
write_cpu_topology() (Kan Liang)
Cc: Adrian Hunter <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: Wang Nan <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Moving tracing_path interface into api/fs/tracing_path.c out of util.c.
It seems generic enough to be used by others, and I couldn't think of
better place.
Signed-off-by: Jiri Olsa <[email protected]>
Reviewed-by: Matt Fleming <[email protected]>
Reviewed-by: Raphael Beamonte <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Steven Rostedt <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Renaming all functions touching tracing_path under same namespace. New
interface is:
char tracing_path[];
- tracing mount path
char tracing_events_path[];
- tracing mount/events path
void tracing_path_set(const char *mountpoint);
- setting directly tracing_path(_events), used by --debugfs-dir option
const char *tracing_path_mount(void);
- initial setup of tracing_(events)_path, called from perf.c
mounts debugfs/tracefs if needed and possible
char *get_tracing_file(const char *name);
void put_tracing_file(char *file);
- get/put tracing file path
Signed-off-by: Jiri Olsa <[email protected]>
Cc: Raphael Beamonte <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Matt Fleming <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Steven Rostedt <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
It's not used by any caller. We either detect the mountpoint or use
hardcoded one.
Signed-off-by: Jiri Olsa <[email protected]>
Cc: Raphael Beamonte <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Matt Fleming <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Steven Rostedt <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The tracing_events_path is the variable we want to change via
--debugfs-dir option, not the debugfs_mountpoint.
Signed-off-by: Jiri Olsa <[email protected]>
Reviewed-by: Matt Fleming <[email protected]>
Cc: Raphael Beamonte <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The perf-completion.sh uses a predefined string '--help --version
--exec-path --html-path --paginate --no-pager --perf-dir --work-tree
--debugfs-dir' for the bash completion of 'perf --*', which has two
problems:
Problem 1: If the options of perf are changed (see handle_options() in
perf.c), the perf-completion.sh has to be changed at the same time. If
not, the bash completion of 'perf --*' and the options which perf
really supports will be inconsistent.
Problem 2: When typing another single character after 'perf --', e.g.
'h', and hit TAB key to get the bash completion of 'perf --h', the
character 'h' disappears at once. This is not what we want, we wish the
bash completion can return '--help --html-path' and then we can
continue to choose one.
To solve this problem, we add '--list-opts' to perf, which now supports
'perf --list-opts' directly, and its result can be used in bash
completion now.
Example:
Before this patch:
$ perf --h <-- hit TAB key after character 'h'
$ perf -- <-- 'h' disappears and no required result
After this patch:
$ perf --h <-- hit TAB key after character 'h'
--help --html-path <-- the required result
Signed-off-by: Yunlong Song <[email protected]>
Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Wang Nan <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Distinguish the output of 'perf list --list-opts' or 'perf --list-cmds'
with the next command prompt, which also happens in other cases (e.g.
record, report ...).
Example:
Before this patch:
$perf list --list-opts
--raw-dump $ <-- the output and the next command prompt are at
the same line
After this patch:
$perf list --list-opts
--raw-dump
$ <-- the new line
Signed-off-by: Yunlong Song <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Wang Nan <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Adding new 'perf data' command to provide operations over data files.
The 'perf data convert' sub command is coming in following patch, but
there's possibility for other useful commands like 'perf data ls' (to
display perf data file in directory in ls style).
Signed-off-by: Jiri Olsa <[email protected]>
Acked-by: Namhyung Kim <[email protected]>
Reviewed-by: David Ahern <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Jeremie Galarneau <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Sebastian Andrzej Siewior <[email protected]>
Cc: Tom Zanussi <[email protected]>
Cc: Wang Nan <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Sebastian Andrzej Siewior <[email protected]>
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Adding --buildid-dir to be able to set specific cache directory. It's
going to be handy for buildid tests coming in shortly.
Signed-off-by: Jiri Olsa <[email protected]>
Cc: Corey Ashford <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: Steven Rostedt <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Use strerror_r instead of strerror in error messages for thread-safety.
This also introduce STRERR_BUFSIZE macro for the default size of message
buffer for strerror_r.
Signed-off-by: Masami Hiramatsu <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Naohiro Aota <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Fixing perf usage string leftover pointed out by Namhyung.
Reported-by: Namhyung Kim <[email protected]>
Cc: Arnaldo Carvalho de Melo <[email protected]>
Cc: Corey Ashford <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/n/[email protected]
Signed-off-by: Jiri Olsa <[email protected]>
|
|
Adding --debug option as a way to setup debug variables. Starting with
support for verbose, more will come.
It's possible to use it now with report command:
$ perf --debug verbose ...
$ perf --debug verbose=2 ...
I'll need this support to add separated debug variable for ordered
events change in order to separate debug output out of standard verbose
stream.
Signed-off-by: Jiri Olsa <[email protected]>
Cc: Corey Ashford <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Different arches may have different cacheline sizes. Look it up and set
a global variable for reference.
Signed-off-by: Don Zickus <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Jiri Olsa <[email protected]>
|
|
When the audit-libs devel package is not found at build time we disable
the 'trace' command, as we are not able to map syscall numbers to
strings, but then the message the user is presented is cryptic:
[root@zoo linux]# trace ls
perf: 'ls' is not a perf-command. See 'perf --help'.
Fix it by presenting a more helpful message:
[root@zoo linux]# trace l
trace command not available: missing audit-libs devel package at build time.
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Don Zickus <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Mike Galbraith <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: http://lkml.kernel.org/n/[email protected]
Signed-off-by: Jiri Olsa <[email protected]>
|
|
Move debugfs.* to api/fs/. We have a common tools/lib/api/ place where
the Makefile lives and then we place the headers in subdirs.
For example, all the fs-related stuff goes to tools/lib/api/fs/ from
which we get libapikfs.a (acme got almost the naming he wanted :-)) and
we link it into the tools which need it - in this case perf and
tools/vm/page-types.
acme:
"Looking at the implementation, I think some tools can even link
directly to the .o files, avoiding the .a file altogether.
But that is just an optimization/finer granularity tools/lib/
cherrypicking that toolers can make use of."
Fixup documentation cleaning target while at it.
Signed-off-by: Borislav Petkov <[email protected]>
Acked-by: Ingo Molnar <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Arjan van de Ven <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mike Galbraith <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Pekka Enberg <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Robert Richter <[email protected]>
Cc: Stanislav Fomichev <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: Steven Rostedt <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Make 'perf trace' more accessible by aliasing it to just 'trace':
[root@zoo linux]# trace --duration 15 -a -e futex sleep 1
110.092 (16.188 ms): libvirtd/1166 futex(uaddr: 0x185b344, op: WAIT|PRIV, val: 174293 ) = 0
110.101 (15.903 ms): libvirtd/1171 futex(uaddr: 0x185b3dc, op: WAIT|PRIV, val: 139265 ) = 0
111.594 (15.776 ms): libvirtd/1165 futex(uaddr: 0x185b344, op: WAIT|PRIV, val: 174295 ) = 0
111.610 (15.969 ms): libvirtd/1169 futex(uaddr: 0x185b3dc, op: WAIT|PRIV, val: 139267 ) = 0
113.556 (16.216 ms): libvirtd/1168 futex(uaddr: 0x185b3dc, op: WAIT|PRIV, val: 139269 ) = 0
291.265 (199.508 ms): chromium-brows/15830 futex(uaddr: 0x7fff2986bcb4, op: WAIT_BITSET|PRIV|CLKRT, val: 1, utime: 0x7fff2986bab0, val3: 4294967295) = -1 ETIMEDOUT Connection timed out
360.354 (69.053 ms): chromium-brows/15830 futex(uaddr: 0x7fff2986bcb4, op: WAIT_BITSET|PRIV|CLKRT, val: 1, utime: 0x7fff2986bab0, val3: 4294967295) = -1 ETIMEDOUT Connection timed out
[root@zoo linux]#
I.e. looking for futex calls that take at least 15ms, system wide, during a one
second window. Now to get callchains into 'trace' to figure out what are those
locks :-)
Requested-by: Ingo Molnar <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mike Galbraith <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: http://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Making page_size global from the util object.
Removing the not needed one.
Signed-off-by: Jiri Olsa <[email protected]>
Acked-by: Namhyung Kim <[email protected]>
Cc: Corey Ashford <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Standardize all the feature flags based on the HAVE_{FEATURE}_SUPPORT naming convention:
HAVE_ARCH_X86_64_SUPPORT
HAVE_BACKTRACE_SUPPORT
HAVE_CPLUS_DEMANGLE_SUPPORT
HAVE_DWARF_SUPPORT
HAVE_ELF_GETPHDRNUM_SUPPORT
HAVE_GTK2_SUPPORT
HAVE_GTK_INFO_BAR_SUPPORT
HAVE_LIBAUDIT_SUPPORT
HAVE_LIBELF_MMAP_SUPPORT
HAVE_LIBELF_SUPPORT
HAVE_LIBNUMA_SUPPORT
HAVE_LIBUNWIND_SUPPORT
HAVE_ON_EXIT_SUPPORT
HAVE_PERF_REGS_SUPPORT
HAVE_SLANG_SUPPORT
HAVE_STRLCPY_SUPPORT
Cc: Arnaldo Carvalho de Melo <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Jiri Olsa <[email protected]>
Link: http://lkml.kernel.org/n/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
|
|
Cc: David Ahern <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mike Galbraith <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: http://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
This new command is a wrapper on top of perf record and perf report to
make it easier to configure for memory access profiling.
To record loads:
$ perf mem -t load rec .....
To record stores:
$ perf mem -t store rec .....
To get the report:
$ perf mem -t load rep
Signed-off-by: Stephane Eranian <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
[ Fixed minor conflict with 66857b5 "Sort command-list.txt alphabetically" ]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Move them to util.c and simplify code a bit.
Signed-off-by: Borislav Petkov <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Steven Rostedt <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
This introduces the tools/lib/lk library, that will gradually have the
routines that now are used in tools/perf/ and other tools and that can
be shared.
Start by carving out debugfs routines for general use.
Signed-off-by: Borislav Petkov <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Steven Rostedt <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
[ committer note: Add tools/lib/lk/ to perf's MANIFEST so that its tarballs continue to build ]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Some would just call exit() anyway right after calling die() and the
main routine doesn't have to call it, just return the exit value.
Cc: David Ahern <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mike Galbraith <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: http://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Add config option for launching GTK browser for the specified command by
default. Currently only 'report' command is supported.
Adding following line to the perfconfig file will have a same effect of
specifying --gtk option on command line (unless other related options
are not given).
$ cat ~/.perfconfig
[gtk]
report = true
Signed-off-by: Namhyung Kim <[email protected]>
Acked-by: Pekka Enberg <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Pekka Enberg <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The idea is run perf session with kidnapping sys_perf_event_open
function. For each sys_perf_event_open call we store the perf_event_attr
data to the file to be checked later against what we expect.
You can run this by:
$ python ./tests/attr.py -d ./tests/attr/ -p ./perf -v
v2 changes:
- preserve errno value in the hook
Signed-off-by: Jiri Olsa <[email protected]>
Cc: Arnaldo Carvalho de Melo <[email protected]>
Cc: Corey Ashford <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Currently many perf commands annotate/evlist/report/script/lock etc all
support "-i" option to chose a specific perf data, and all of them
create a local "input_name" to save the file name for that perf data.
Since most of these commands need it, we can add a global variable for
it, also it can some other benefits:
1. When calling script browser inside hists/annotation browser, it needs
to know the perf data file name to run that script.
2. For further feature like runtime switching to another perf data file,
this variable can also help.
Signed-off-by: Feng Tang <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Its such a common need that we might as well have a global with that
value.
Cc: David Ahern <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mike Galbraith <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: http://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
For building perf without libaudit, we can set NO_LIBAUDIT=1 as a
argument of make. It then defines NO_LIBAUDIT_SUPPORT macro for C code
to do the proper handling. However it usually used in a negative
semantics - e.g. #ifndef - so we saw double negations which can be
misleading. Convert it to a positive form to make it more readable.
Signed-off-by: Namhyung Kim <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
For building perf without libelf, we can set NO_LIBELF=1 as a argument
of make. It then defines NO_LIBELF_SUPPORT macro for C code to do the
proper handling. However it usually used in a negative semantics -
e.g. #ifndef - so we saw double negations which can be misleading.
Convert it to a positive form to make it more readable.
Signed-off-by: Namhyung Kim <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The newly added trace command requires an external audit library.
However it can cause a build error because it's not checked whether the
libaudit is installed on system:
CC builtin-trace.o
builtin-trace.c:7:22: fatal error: libaudit.h: No such file or directory
compilation terminated.
make: *** [builtin-trace.o] Error 1
Signed-off-by: Namhyung Kim <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
[ committer note: Added ", disables 'trace tool' to the feature warning msg ]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Initially should look loosely like the venerable 'strace' tool, but
using the infrastructure in the perf tools to allow tracing extra
targets:
[acme@sandy linux]$ perf trace --hell
Error: unknown option `hell'
usage: perf trace <PID>
-p, --pid <pid> trace events on existing process id
--tid <tid> trace events on existing thread id
--all-cpus system-wide collection from all CPUs
--cpu <cpu> list of cpus to monitor
--no-inherit child tasks do not inherit counters
--mmap-pages <n> number of mmap data pages
--uid <user> user to profile
[acme@sandy linux]$
Those should have the same semantics as when using with 'perf record'.
It gets stuck sometimes, but hey, it works sometimes too!
In time it should support perf.data based workloads, i.e. it should have
a:
-o filename
Command line option that will produce a perf.data file that can then be
used with 'perf trace' or any of the other perf tools (script, report,
etc).
It will also eventually have the set of functionalities described in the
previous 'trace' prototype by Thomas Gleixner:
"Announcing a new utility: 'trace'"
http://lwn.net/Articles/415728/
Also planned is to have some of the features suggested in the comments
of that LWN article.
Cc: David Ahern <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mike Galbraith <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: Steven Rostedt <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Link: http://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
pthread variables are used in some files without explicitely including
pthread.h. This leads to compile errors on Android. e.g.: in annotate.h,
error: unknown type name 'pthread_mutex_t'
Including pthread.h explicitely in files that use it to have all definitions
included.
Signed-off-by: Irina Tirdea <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Steven Rostedt <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Now we have isolated all ELF-specific stuff, it's possible to build
without libelf. The output binary can do most of jobs but lacks (user
level) symbol information - kernel symbols are still accessable thanks
to the kallsyms.
To build perf without libelf (elfutils), give NO_LIBELF=1 to make.
For now, only 'perf probe' command is removed since it depends on
libelf/libdw heavily.
Signed-off-by: Namhyung Kim <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
This implements bash completion for perf subcommands such as record,
report, script, probe, etc...
Signed-off-by: Frederic Weisbecker <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
We don't need to have two PATH_MAX char sized arrays holding it, just
one in util/debugfs.c will do.
Also rename debugfs_path to tracing_events_path, as it is not the path
to debugfs, that is debugfs_mountpoint. Both are now accessible.
This will allow accessing this code in the perf python binding without
having to drag in perf.c and util/parse-events.c.
The defaults for these variables are the canonical "/sys/kernel/debug"
and "/sys/kernel/debug/tracing/events/", removing the need for simple
tools to call debugfs_mount(NULL).
Cc: David Ahern <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Mike Galbraith <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: http://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
To do that we needed to stop using newtForm, as we don't want libnewt to
catch the xterm resize signal.
Remove some more newt calls and instead use the underlying libslang
directly. In time tools/perf will use just libslang.
Cc: David Ahern <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Mike Galbraith <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: http://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
[root@emilia ~]# perf record -a -e sched:* -e timer:timer* sleep 5
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.172 MB perf.data (~7530 samples) ]
[root@emilia ~]# perf evlist
sched:sched_kthread_stop
sched:sched_kthread_stop_ret
sched:sched_wakeup
sched:sched_wakeup_new
sched:sched_switch
sched:sched_migrate_task
sched:sched_process_free
sched:sched_process_exit
sched:sched_wait_task
sched:sched_process_wait
sched:sched_process_fork
sched:sched_stat_wait
sched:sched_stat_sleep
sched:sched_stat_iowait
sched:sched_stat_runtime
sched:sched_pi_setprio
timer:timer_init
timer:timer_start
timer:timer_expire_entry
timer:timer_expire_exit
timer:timer_cancel
[root@emilia ~]#
Cc: Frederic Weisbecker <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Mike Galbraith <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: Tom Zanussi <[email protected]>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
We need to defer calling perf_evsel_list__delete() till after atexit
registered routines, because we need to traverse the events being
recorded at that time at least on 'perf record'.
This fixes the problem reported by Thomas Renninger where cmd_record
called by cmd_timechart would not write the tracing data to the perf.data
file header because the evsel_list at atexit (control+C on 'perf timechart
record') time would be empty, being already deleted by run_builtin(),
and thus 'perf timechart' when trying to process such perf.data file would
die with:
"no trace data in the file"
Problem introduced in 70d544d.
Reported-by: Thomas Renninger <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Mike Galbraith <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: Thomas Renninger <[email protected]>
Cc: Tom Zanussi <[email protected]>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Freeing all the possibly allocated resources, reducing complexity
on each tool exit path.
Cc: Frederic Weisbecker <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Mike Galbraith <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: Tom Zanussi <[email protected]>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Free the perf trace name space and rename the trace to 'script' which is a
better match for the scripting engine.
Signed-off-by: Ingo Molnar <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
|