Age | Commit message (Collapse) | Author | Files | Lines |
|
Use wrapped functions as much as possible, to check out of
memory conditions in perf probe.
Signed-off-by: Masami Hiramatsu <[email protected]>
Cc: systemtap <[email protected]>
Cc: DLE <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Arnaldo Carvalho de Melo <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Mike Galbraith <[email protected]>
Cc: Peter Zijlstra <[email protected]>
LKML-Reference: <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
|
|
Fix probe_point array-size overrun problem. In some cases (e.g.
inline function), one user-specified probe-point can be
translated to many probe address, and it overruns pre-defined
array-size. This also removes redundant MAX_PROBES macro
definition.
Signed-off-by: Masami Hiramatsu <[email protected]>
Cc: systemtap <[email protected]>
Cc: DLE <[email protected]>
Cc: <[email protected]>
LKML-Reference: <[email protected]>
[ Note that only root can create new probes. Eventually we should remove
the MAX_PROBES limit, but that is a larger patch not eligible to
perf/urgent treatment. ]
Signed-off-by: Ingo Molnar <[email protected]>
|
|
Move @SRC right after FUNC in syntax according to syntax change
on command line help.
Signed-off-by: Masami Hiramatsu <[email protected]>
Cc: systemtap <[email protected]>
Cc: DLE <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Arnaldo Carvalho de Melo <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Mike Galbraith <[email protected]>
Cc: K.Prasad <[email protected]>
LKML-Reference: <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
|
|
Add lazy line matching support for specifying new probes.
This also changes the syntax of perf probe a bit. Now
perf probe accepts one of below probe event definitions.
1) Define event based on function name
[EVENT=]FUNC[@SRC][:RLN|+OFF|%return|;PTN] [ARG ...]
2) Define event based on source file with line number
[EVENT=]SRC:ALN [ARG ...]
3) Define event based on source file with lazy pattern
[EVENT=]SRC;PTN [ARG ...]
- New lazy matching pattern(PTN) follows ';' (semicolon). And it
must be put the end of the definition.
- So, @SRC is no longer the part which must be put at the end
of the definition.
Note that ';' (semicolon) can be interpreted as the end of
a command by the shell. This means that you need to quote it.
(anyway you will need to quote the lazy pattern itself too,
because it may contains other sensitive characters, like
'[',']' etc.).
Lazy matching
-------------
The lazy line matching is similar to glob matching except
ignoring spaces in both of pattern and target.
e.g.
'a=*' can matches 'a=b', 'a = b', 'a == b' and so on.
This provides some sort of flexibility and robustness to
probe point definitions against minor code changes.
(for example, actual 10th line of schedule() can be changed
easily by modifying schedule(), but the same line matching
'rq=cpu_rq*' may still exist.)
Changes in v3:
- Cast Dwarf_Addr to uintmax_t for printf-formats.
Changes in v2:
- Cast Dwarf_Addr to unsigned long long for printf-formats.
Signed-off-by: Masami Hiramatsu <[email protected]>
Cc: systemtap <[email protected]>
Cc: DLE <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Arnaldo Carvalho de Melo <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Mike Galbraith <[email protected]>
Cc: K.Prasad <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Ananth N Mavinakayanahalli <[email protected]>
LKML-Reference: <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
|
|
Newer gcc introduces newer & richer debuginfo, and only libdw
in elfutils project can support it. So perf probe moves onto
elfutils-libdw from libdwarf.
Changes in v3:
- Cast Dwarf_Addr/Dwarf_Word to uintmax_t for printf-formats.
- Recover a sign-prefix which was removed in v2 by mistake.
Changes in v2:
- Fix a type-casting bug in Makefile.
- Cast Dwarf_Addr/Dwarf_Word to unsigned long long for printf-formats.
Signed-off-by: Masami Hiramatsu <[email protected]>
Cc: systemtap <[email protected]>
Cc: DLE <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Arnaldo Carvalho de Melo <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Mike Galbraith <[email protected]>
Cc: K.Prasad <[email protected]>
Cc: Ulrich Drepper <[email protected]>
Cc: Roland McGrath <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Ananth N Mavinakayanahalli <[email protected]>
LKML-Reference: <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
|
|
Rename *_probepoint to *_probe_point, for nothing
but a cosmetic reason.
Signed-off-by: Masami Hiramatsu <[email protected]>
Cc: systemtap <[email protected]>
Cc: DLE <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Arnaldo Carvalho de Melo <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Mike Galbraith <[email protected]>
Cc: K.Prasad <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Ananth N Mavinakayanahalli <[email protected]>
LKML-Reference: <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
|
|
Do not show --line option in help message when perf
doesn't support dwarf.
Signed-off-by: Masami Hiramatsu <[email protected]>
Cc: systemtap <[email protected]>
Cc: DLE <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Arnaldo Carvalho de Melo <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Mike Galbraith <[email protected]>
Cc: K.Prasad <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Ananth N Mavinakayanahalli <[email protected]>
LKML-Reference: <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
|
|
With the recent modifications done to untie the session and
symbol layers, 'perf probe' now can use just the symbols layer.
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Acked-by: Masami Hiramatsu <[email protected]>
Cc: Frédéric Weisbecker <[email protected]>
Cc: Masami Hiramatsu <[email protected]>
Cc: Mike Galbraith <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Paul Mackerras <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
|
|
I noticed while writing the first test in 'perf regtest' that to
just test the symbol handling routines one needs to create a
perf session, that is a layer centered on a perf.data file,
events, etc, so I untied these layers.
This reduces the complexity for the users as the number of
parameters to most of the symbols and session APIs now was
reduced while not adding more state to all the map instances by
only having data that is needed to split the kernel (kallsyms
and ELF symtab sections) maps and do vmlinux relocation on the
main kernel map.
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Cc: Frédéric Weisbecker <[email protected]>
Cc: Mike Galbraith <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Paul Mackerras <[email protected]>
LKML-Reference: <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
|
|
I got this build error when building tip tree:
| cc1: warnings being treated as errors
| builtin-probe.c:123: error: 'opt_show_lines' defined but not used
This error is caused by:
| #ifndef NO_LIBDWARF
| OPT_CALLBACK('L', "line", NULL,
| "FUNC[:RLN[+NUM|:RLN2]]|SRC:ALN[+NUM|:ALN2]",
| "Show source code lines.", opt_show_lines),
| #endif
My environment defines NO_LIBDWARF, so gcc treated
opt_show_lines() as garbage. So I moved opt_show_lines() into
#ifndef NO_LIBDWARF ... #endif block.
Signed-off-by: Hitoshi Mitake <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Masami Hiramatsu <[email protected]>
Cc: Mike Galbraith <[email protected]>
LKML-Reference: <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
|
|
Add --line option to support showing probable source-code lines.
perf probe --line SRC:LN[-LN|+NUM]
or
perf probe --line FUNC[:LN[-LN|+NUM]]
This option shows source-code with line number if the line can
be probed. Lines without line number (and blue color) means that
the line can not be probed, because debuginfo doesn't have the
information of those lines.
The argument specifies the range of lines, "source.c:100-120"
shows lines between 100th to l20th in source.c file. And
"func:10+20" shows 20 lines from 10th line of func function.
e.g.
# ./perf probe --line kernel/sched.c:1080
<kernel/sched.c:1080>
*
* called with rq->lock held and irqs disabled
*/
static void hrtick_start(struct rq *rq, u64 delay)
{
struct hrtimer *timer = &rq->hrtick_timer;
1086 ktime_t time = ktime_add_ns(timer->base->get_time(), delay);
hrtimer_set_expires(timer, time);
1090 if (rq == this_rq()) {
1091 hrtimer_restart(timer);
1092 } else if (!rq->hrtick_csd_pending) {
1093 __smp_call_function_single(cpu_of(rq), &rq->hrtick_csd,
1094 rq->hrtick_csd_pending = 1;
If you specifying function name, this shows function-relative
line number.
# ./perf probe --line schedule
<schedule:0>
asmlinkage void __sched schedule(void)
1 {
struct task_struct *prev, *next;
unsigned long *switch_count;
struct rq *rq;
int cpu;
need_resched:
preempt_disable();
9 cpu = smp_processor_id();
10 rq = cpu_rq(cpu);
11 rcu_sched_qs(cpu);
12 prev = rq->curr;
13 switch_count = &prev->nivcsw;
Signed-off-by: Masami Hiramatsu <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Arnaldo Carvalho de Melo <[email protected]>
Cc: systemtap <[email protected]>
Cc: DLE <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Arnaldo Carvalho de Melo <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Mike Galbraith <[email protected]>
LKML-Reference: <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
|
|
So that tools such as 'perf probe' don't have to lookup
'[kernel.kallsyms]' but instead access them directly after
perf_session__create_kernel_maps or
map_groups__create_kernel_maps.
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Cc: Masami Hiramatsu <[email protected]>
Cc: Frédéric Weisbecker <[email protected]>
Cc: Mike Galbraith <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Paul Mackerras <[email protected]>
LKML-Reference: <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
|
|
Check whether the debugfs path is correct before executing
a command, because perf-probe depends on debugfs.
Signed-off-by: Masami Hiramatsu <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Arnaldo Carvalho de Melo <[email protected]>
Cc: Steven Rostedt <[email protected]>
Cc: Jim Keniston <[email protected]>
Cc: Ananth N Mavinakayanahalli <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: Jason Baron <[email protected]>
Cc: K.Prasad <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Srikar Dronamraju <[email protected]>
Cc: systemtap <[email protected]>
Cc: DLE <[email protected]>
LKML-Reference: <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
|
|
This simplifies a lot of functions, less stuff to be done by
tool writers.
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Cc: Frédéric Weisbecker <[email protected]>
Cc: Mike Galbraith <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Paul Mackerras <[email protected]>
LKML-Reference: <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
|
|
Fix perf probe to show which probe point is not found.
With out this patch, it shows just "No probe point found."
This doesn't help users if they specify several probes.
e.g.
# perf probe -f --add schedule --add test
Fatal: No probe point found.
This patch makes error message more helpful as below.
# perf probe --add schedule --add test
Fatal: Probe point 'test' not found. - probe not added.
Signed-off-by: Masami Hiramatsu <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Arnaldo Carvalho de Melo <[email protected]>
Cc: Steven Rostedt <[email protected]>
Cc: Jim Keniston <[email protected]>
Cc: Ananth N Mavinakayanahalli <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: Frank Ch. Eigler <[email protected]>
Cc: Jason Baron <[email protected]>
Cc: K.Prasad <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Srikar Dronamraju <[email protected]>
Cc: systemtap <[email protected]>
Cc: DLE <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
LKML-Reference: <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
|
|
Check symbols in symtab/kallsyms when no debuginfo
is available.
e.g.
# perf probe test
Fatal: Kernel symbol 'test' not found - probe not added.
Signed-off-by: Masami Hiramatsu <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Arnaldo Carvalho de Melo <[email protected]>
Cc: Steven Rostedt <[email protected]>
Cc: Jim Keniston <[email protected]>
Cc: Ananth N Mavinakayanahalli <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: Frank Ch. Eigler <[email protected]>
Cc: Jason Baron <[email protected]>
Cc: K.Prasad <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Srikar Dronamraju <[email protected]>
Cc: systemtap <[email protected]>
Cc: DLE <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
LKML-Reference: <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
|
|
Check build-id of vmlinux by using functions in symbol.c.
This also exposes map__load() for getting vmlinux path,
and removes vmlinux path list in builtin-probe.c,
because symbol.c already has that. Checking build-id
prevents users to open old or different debuginfo from
current running kernel.
Signed-off-by: Masami Hiramatsu <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Arnaldo Carvalho de Melo <[email protected]>
Cc: Steven Rostedt <[email protected]>
Cc: Jim Keniston <[email protected]>
Cc: Ananth N Mavinakayanahalli <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: Frank Ch. Eigler <[email protected]>
Cc: Jason Baron <[email protected]>
Cc: K.Prasad <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Srikar Dronamraju <[email protected]>
Cc: systemtap <[email protected]>
Cc: DLE <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
LKML-Reference: <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
|
|
Reject second attempt of adding same-name event. This patch
also provides --force option which allows user to add additional
probe events on the same-name event.
e.g.
(the first attempt : success)
./perf probe schedule
Added new event:
probe:schedule (on schedule+0)
(the second attempt : failure)
./perf probe schedule:11
Error: event "schedule" already exists. (Use -f to force duplicates.)
Fatal: Can't add new event.
(the second attempt with -f : successfully added)
./perf probe -f schedule:11
Added new event:
probe:schedule_1 (on schedule+45)
Signed-off-by: Masami Hiramatsu <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Arnaldo Carvalho de Melo <[email protected]>
Cc: Steven Rostedt <[email protected]>
Cc: Jim Keniston <[email protected]>
Cc: Ananth N Mavinakayanahalli <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: Frank Ch. Eigler <[email protected]>
Cc: Jason Baron <[email protected]>
Cc: K.Prasad <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Srikar Dronamraju <[email protected]>
Cc: systemtap <[email protected]>
Cc: DLE <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
LKML-Reference: <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
|
|
Support event name syntax for --add option. This allows
users to specify event name for each new event.
The --add syntax is:
perf probe --add '[EVENT=]SRC:LINE ARGS'
or
perf probe --add '[EVENT=]FUNC[+OFFS|%return|:RLN][@SRC] ARGS'
e.g.
./perf probe --add myprobe1=schedule
Note: currently group name is not supported yet, because it
can cause name-space confliction with other tracepoint/
hw-breakpoint events.
Signed-off-by: Masami Hiramatsu <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Arnaldo Carvalho de Melo <[email protected]>
Cc: Steven Rostedt <[email protected]>
Cc: Jim Keniston <[email protected]>
Cc: Ananth N Mavinakayanahalli <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: Frank Ch. Eigler <[email protected]>
Cc: Jason Baron <[email protected]>
Cc: K.Prasad <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Srikar Dronamraju <[email protected]>
Cc: systemtap <[email protected]>
Cc: DLE <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
LKML-Reference: <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
|
|
Show need-dwarf message only if the probe is really requires
debuginfo analysis. This also use pr_debug for debugging message
instead of pr_warning.
Signed-off-by: Masami Hiramatsu <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Arnaldo Carvalho de Melo <[email protected]>
Cc: Steven Rostedt <[email protected]>
Cc: Jim Keniston <[email protected]>
Cc: Ananth N Mavinakayanahalli <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: Frank Ch. Eigler <[email protected]>
Cc: Jason Baron <[email protected]>
Cc: K.Prasad <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Srikar Dronamraju <[email protected]>
Cc: systemtap <[email protected]>
Cc: DLE <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
LKML-Reference: <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
|
|
Check hyphen only command argument, because perf-probe doesn't
support event recording feature yet.
e.g.
# perf probe -
Error: '-' is not supported.
Signed-off-by: Masami Hiramatsu <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Arnaldo Carvalho de Melo <[email protected]>
Cc: Steven Rostedt <[email protected]>
Cc: Jim Keniston <[email protected]>
Cc: Ananth N Mavinakayanahalli <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: Frank Ch. Eigler <[email protected]>
Cc: Jason Baron <[email protected]>
Cc: K.Prasad <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Srikar Dronamraju <[email protected]>
Cc: systemtap <[email protected]>
Cc: DLE <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
LKML-Reference: <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
|
|
Clean up struct session in builtin-probe.c, including
change need_dwarf to bool and move listing flag into
struct session as list_events flag.
This also changes parse_perf_probe_event() interface
due to code readability.
Signed-off-by: Masami Hiramatsu <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Arnaldo Carvalho de Melo <[email protected]>
Cc: Steven Rostedt <[email protected]>
Cc: Jim Keniston <[email protected]>
Cc: Ananth N Mavinakayanahalli <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: Frank Ch. Eigler <[email protected]>
Cc: Jason Baron <[email protected]>
Cc: K.Prasad <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Srikar Dronamraju <[email protected]>
Cc: systemtap <[email protected]>
Cc: DLE <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
LKML-Reference: <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
|
|
Support perf probe --del <event> option. Currently,
perf probe can have only one event for each --del option.
If you'd like to delete several probe events, you need
to specify --del for each events.
Signed-off-by: Masami Hiramatsu <[email protected]>
Cc: Steven Rostedt <[email protected]>
Cc: Jim Keniston <[email protected]>
Cc: Ananth N Mavinakayanahalli <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: Frank Ch. Eigler <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Jason Baron <[email protected]>
Cc: K.Prasad <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Srikar Dronamraju <[email protected]>
Cc: Arnaldo Carvalho de Melo <[email protected]>
Cc: systemtap <[email protected]>
Cc: DLE <[email protected]>
LKML-Reference: <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
|
|
Support vmlinux on current working direcotry by default and
also update file-open messages.
Now perf probe searches ./vmlinux too.
Signed-off-by: Masami Hiramatsu <[email protected]>
Cc: Steven Rostedt <[email protected]>
Cc: Jim Keniston <[email protected]>
Cc: Ananth N Mavinakayanahalli <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: Frank Ch. Eigler <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Jason Baron <[email protected]>
Cc: K.Prasad <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Srikar Dronamraju <[email protected]>
Cc: Arnaldo Carvalho de Melo <[email protected]>
Cc: systemtap <[email protected]>
Cc: DLE <[email protected]>
LKML-Reference: <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
|
|
Fix add-probe command syntax without --add option.
perf-probe supports add-probe command without --add
option. But it treats each argument as an event definition.
e.g.
perf probe func arg1 arg2
is interpreted as
perf probe --add func --add arg1 --add arg2
But it may be useless in many cases.
This patch fixes this syntax to fold those arguments into
one event definition if there is no --add option. With this
change, above command is interpreted as below;
perf probe --add "func arg1 arg2"
Signed-off-by: Masami Hiramatsu <[email protected]>
Cc: Steven Rostedt <[email protected]>
Cc: Jim Keniston <[email protected]>
Cc: Ananth N Mavinakayanahalli <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: Frank Ch. Eigler <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Jason Baron <[email protected]>
Cc: K.Prasad <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Srikar Dronamraju <[email protected]>
Cc: Arnaldo Carvalho de Melo <[email protected]>
Cc: systemtap <[email protected]>
Cc: DLE <[email protected]>
LKML-Reference: <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
|
|
Use pr_debug() for "missing vmlinux" debugging message.
Signed-off-by: Masami Hiramatsu <[email protected]>
Cc: systemtap <[email protected]>
Cc: DLE <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Arnaldo Carvalho de Melo <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
LKML-Reference: <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
|
|
Fix:
cc1: warnings being treated as errors
builtin-probe.c: In function 'cmd_probe':
builtin-probe.c:163: error: unused variable 'fd'
Signed-off-by: Xiao Guangrong <[email protected]>
Cc: Masami Hiramatsu <[email protected]>
Cc: Peter Zijlstra <[email protected]>
LKML-Reference: <[email protected]>
[ v2: use NO_LIBDWARF instead of __used ]
Signed-off-by: Ingo Molnar <[email protected]>
|
|
Add --list option for listing currently defined probe events
in the kernel. This shows events in below format;
[group:event] <perf-probe probe-definition>
for example:
[probe:schedule_0] schedule+30 cpu
Note that source file/line information is not supported yet.
So even if you added a probe by line, it will be shown in
<symbol+offset>.
Signed-off-by: Masami Hiramatsu <[email protected]>
Cc: systemtap <[email protected]>
Cc: DLE <[email protected]>
Cc: Steven Rostedt <[email protected]>
Cc: Jim Keniston <[email protected]>
Cc: Ananth N Mavinakayanahalli <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: Frank Ch. Eigler <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Jason Baron <[email protected]>
Cc: K.Prasad <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Srikar Dronamraju <[email protected]>
Cc: Arnaldo Carvalho de Melo <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
LKML-Reference: <20091201002017.10235.76575.stgit@harusame>
Signed-off-by: Ingo Molnar <[email protected]>
|
|
Split probe event (kprobe-events and perf probe events) utility
functions from builtin-probe.c to probe-event.c.
Signed-off-by: Masami Hiramatsu <[email protected]>
Cc: systemtap <[email protected]>
Cc: DLE <[email protected]>
Cc: Steven Rostedt <[email protected]>
Cc: Jim Keniston <[email protected]>
Cc: Ananth N Mavinakayanahalli <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: Frank Ch. Eigler <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Jason Baron <[email protected]>
Cc: K.Prasad <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Srikar Dronamraju <[email protected]>
Cc: Arnaldo Carvalho de Melo <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
LKML-Reference: <20091201001958.10235.90243.stgit@harusame>
Signed-off-by: Ingo Molnar <[email protected]>
|
|
Fix the index of formatted probe array for multiple probe
points, which should be probes[i] instead of probes[0].
Signed-off-by: Masami Hiramatsu <[email protected]>
Cc: systemtap <[email protected]>
Cc: DLE <[email protected]>
Cc: Steven Rostedt <[email protected]>
Cc: Jim Keniston <[email protected]>
Cc: Ananth N Mavinakayanahalli <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: Frank Ch. Eigler <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Jason Baron <[email protected]>
Cc: K.Prasad <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Srikar Dronamraju <[email protected]>
Cc: Arnaldo Carvalho de Melo <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
LKML-Reference: <20091201001950.10235.54781.stgit@harusame>
Signed-off-by: Ingo Molnar <[email protected]>
|
|
Since the syntax has been changed, probe definition needs
parameters less than MAX_PROBE_ARGS + 1 (probe-point +
arguments).
Signed-off-by: Masami Hiramatsu <[email protected]>
Cc: systemtap <[email protected]>
Cc: DLE <[email protected]>
Cc: Steven Rostedt <[email protected]>
Cc: Jim Keniston <[email protected]>
Cc: Ananth N Mavinakayanahalli <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: Frank Ch. Eigler <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Jason Baron <[email protected]>
Cc: K.Prasad <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Srikar Dronamraju <[email protected]>
Cc: Arnaldo Carvalho de Melo <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
LKML-Reference: <20091201001943.10235.80367.stgit@harusame>
Signed-off-by: Ingo Molnar <[email protected]>
|
|
Change annoying debug-info using notice from pr_info() to
pr_debug(), since the message always printed when user adds a
probe point which requires debug-info.
Signed-off-by: Masami Hiramatsu <[email protected]>
Cc: systemtap <[email protected]>
Cc: DLE <[email protected]>
Cc: Steven Rostedt <[email protected]>
Cc: Jim Keniston <[email protected]>
Cc: Ananth N Mavinakayanahalli <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: Frank Ch. Eigler <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Jason Baron <[email protected]>
Cc: K.Prasad <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Srikar Dronamraju <[email protected]>
Cc: Arnaldo Carvalho de Melo <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
LKML-Reference: <20091201001927.10235.63645.stgit@harusame>
Signed-off-by: Ingo Molnar <[email protected]>
|
|
This way we type less characters and it looks more like the
kzalloc kernel counterpart.
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Cc: Frédéric Weisbecker <[email protected]>
Cc: Mike Galbraith <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Paul Mackerras <[email protected]>
LKML-Reference: <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
|
|
Rename the group name of perf probe events to 'probe'.
Signed-off-by: Masami Hiramatsu <[email protected]>
Acked-by: Frederic Weisbecker <[email protected]>
Cc: Steven Rostedt <[email protected]>
Cc: Jim Keniston <[email protected]>
Cc: Ananth N Mavinakayanahalli <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: Frank Ch. Eigler <[email protected]>
Cc: Jason Baron <[email protected]>
Cc: K.Prasad <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Srikar Dronamraju <[email protected]>
LKML-Reference: <20091104001238.3454.70508.stgit@harusame>
Signed-off-by: Ingo Molnar <[email protected]>
|
|
Fall back to non-dwarf probe point if the probe definition may
not need dwarf analysis, when perf can't find vmlinux/debuginfo.
This might skip some inlined code of target function.
Signed-off-by: Masami Hiramatsu <[email protected]>
Acked-by: Frederic Weisbecker <[email protected]>
Cc: Steven Rostedt <[email protected]>
Cc: Jim Keniston <[email protected]>
Cc: Ananth N Mavinakayanahalli <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: Frank Ch. Eigler <[email protected]>
Cc: Jason Baron <[email protected]>
Cc: K.Prasad <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Srikar Dronamraju <[email protected]>
LKML-Reference: <20091104001229.3454.63987.stgit@harusame>
Signed-off-by: Ingo Molnar <[email protected]>
|
|
Improve error messages in perf-probe so that users can figure
out problems easily.
Reported-by: Ingo Molnar <[email protected]>
Signed-off-by: Masami Hiramatsu <[email protected]>
Acked-by: Frederic Weisbecker <[email protected]>
Cc: Steven Rostedt <[email protected]>
Cc: Jim Keniston <[email protected]>
Cc: Ananth N Mavinakayanahalli <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: Frank Ch. Eigler <[email protected]>
Cc: Jason Baron <[email protected]>
Cc: K.Prasad <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Srikar Dronamraju <[email protected]>
LKML-Reference: <20091104001221.3454.52030.stgit@harusame>
Signed-off-by: Ingo Molnar <[email protected]>
|
|
Annotate away this false positive warning on older GCCs:
cc1: warnings being treated as errors
builtin-probe.c: In function ‘parse_probe_event’:
builtin-probe.c:72: warning: ‘nc’ is used uninitialized in this function
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Acked-by: Masami Hiramatsu <[email protected]>
LKML-Reference: <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
|
|
Add function-entry relative line number specifying support to
perf-probe. This allows users to define probes by line number
from entry of the function.
e.g.
perf probe schedule:16
Signed-off-by: Masami Hiramatsu <[email protected]>
Cc: Steven Rostedt <[email protected]>
Cc: Jim Keniston <[email protected]>
Cc: Ananth N Mavinakayanahalli <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: Frank Ch. Eigler <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Jason Baron <[email protected]>
Cc: K.Prasad <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Srikar Dronamraju <[email protected]>
LKML-Reference: <20091027204319.30545.30678.stgit@harusame>
Signed-off-by: Ingo Molnar <[email protected]>
|
|
This changes probe point syntax of perf-probe as below
<SRC>[:ABS_LN] [ARGS]
or
<FUNC>[+OFFS|%return][@SRC] [ARGS]
And event name and event group name are automatically
generated based on probe-symbol and offset as below.
perfprobes/SYMBOL_OFFSET[_NUM]
Where SYMBOL is the probing symbol and OFFSET is
the byte offset from the symbol.
Signed-off-by: Masami Hiramatsu <[email protected]>
Cc: Steven Rostedt <[email protected]>
Cc: Jim Keniston <[email protected]>
Cc: Ananth N Mavinakayanahalli <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: Frank Ch. Eigler <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Jason Baron <[email protected]>
Cc: K.Prasad <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Srikar Dronamraju <[email protected]>
LKML-Reference: <20091027204310.30545.84984.stgit@harusame>
Signed-off-by: Ingo Molnar <[email protected]>
|
|
Change command-line option from -P to --add, and accepting
probes without --add too.
perf probe --add "probe-define"
or, just:
perf probe "probe-define"
Signed-off-by: Masami Hiramatsu <[email protected]>
Cc: Steven Rostedt <[email protected]>
Cc: Jim Keniston <[email protected]>
Cc: Ananth N Mavinakayanahalli <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: Frank Ch. Eigler <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Jason Baron <[email protected]>
Cc: K.Prasad <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Srikar Dronamraju <[email protected]>
LKML-Reference: <20091027204301.30545.48600.stgit@harusame>
Signed-off-by: Ingo Molnar <[email protected]>
|
|
Use the new pr_{err,warning,debug,etc} printout methods, just
like in the kernel.
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Cc: Masami Hiramatsu <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Mike Galbraith <[email protected]>
LKML-Reference: <[email protected]>
[ Split this patch out, to keep perf/probes separate. ]
Signed-off-by: Ingo Molnar <[email protected]>
|
|
Replace debug() macro with eprintf() and add -v option for
showing those messages in perf-probe.
Signed-off-by: Masami Hiramatsu <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Arnaldo Carvalho de Melo <[email protected]>
Cc: Steven Rostedt <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
LKML-Reference: <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
|
|
Use die() for exiting perf-probe with errors. This replaces
perror_exit(), msg_exit() and fprintf()+exit() with die(), and
uses die() in semantic_error().
This also renames 'die' local variables to 'dw_die' for avoiding
name confliction.
Signed-off-by: Masami Hiramatsu <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Arnaldo Carvalho de Melo <[email protected]>
Cc: Steven Rostedt <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
LKML-Reference: <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
|
|
Enables 'perf probe' even if libdwarf is not installed. If libdwarf is
not found, 'perf probe' just disables dwarf support. Users can use
'perf probe' to set up new events by using kprobe_events format.
Signed-off-by: Masami Hiramatsu <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Arnaldo Carvalho de Melo <[email protected]>
Cc: Steven Rostedt <[email protected]>
Cc: Mike Galbraith <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: Ananth N Mavinakayanahalli <[email protected]>
Cc: Jim Keniston <[email protected]>
Cc: Frank Ch. Eigler <[email protected]>
LKML-Reference: <[email protected]>
Signed-off-by: Frederic Weisbecker <[email protected]>
|
|
Add perf probe subcommand that implements a kprobe-event setup helper
to the perf command.
This allows user to define kprobe events using C expressions (C line
numbers, C function names, and C local variables).
Usage
-----
perf probe [<options>] -P 'PROBEDEF' [-P 'PROBEDEF' ...]
-k, --vmlinux <file> vmlinux/module pathname
-P, --probe <p|r:[GRP/]NAME FUNC[+OFFS][@SRC]|@SRC:LINE [ARG ...]>
probe point definition, where
p: kprobe probe
r: kretprobe probe
GRP: Group name (optional)
NAME: Event name
FUNC: Function name
OFFS: Offset from function entry (in byte)
SRC: Source code path
LINE: Line number
ARG: Probe argument (local variable name or
kprobe-tracer argument format is supported.)
Changes in v4:
- Add _GNU_SOURCE macro for strndup().
Changes in v3:
- Remove -r option because perf always be used for online kernel.
- Check malloc/calloc results.
Changes in v2:
- Check synthesized string length.
- Rename perf kprobe to perf probe.
- Use spaces for separator and update usage comment.
- Check error paths in parse_probepoint().
- Check optimized-out variables.
Signed-off-by: Masami Hiramatsu <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Arnaldo Carvalho de Melo <[email protected]>
Cc: Steven Rostedt <[email protected]>
Cc: Mike Galbraith <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: Ananth N Mavinakayanahalli <[email protected]>
Cc: Jim Keniston <[email protected]>
Cc: Frank Ch. Eigler <[email protected]>
LKML-Reference: <[email protected]>
Signed-off-by: Frederic Weisbecker <[email protected]>
|