| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Added support for supported regs which are new in power10 ( MMCR3,
SIER2, SIER3 ) to sample_reg_mask in the tool side to use with `-I?`
option. Also added PVR check to send extended mask for power10 at kernel
while capturing extended regs in each sample.
Signed-off-by: Athira Jajeev <[email protected]>
Reviewed-by: Kajol Jain <[email protected]>
Reviewed-by: Ravi Bangoria <[email protected]>
Tested-by: Ravi Bangoria <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Madhavan Srinivasan <[email protected]>
Cc: Michael Ellerman <[email protected]>
Cc: Michael Neuling <[email protected]>
Cc: Ravi Bangoria <[email protected]>
Cc: [email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Add extended regs to sample_reg_mask in the tool side to use with `-I?`
option. Perf tools side uses extended mask to display the platform
supported register names (with -I? option) to the user and also send
this mask to the kernel to capture the extended registers in each
sample. Hence decide the mask value based on the processor version.
Currently definitions for `mfspr`, `SPRN_PVR` are part of
`arch/powerpc/util/header.c`. Move this to a header file so that these
definitions can be re-used in other source files as well.
Signed-off-by: Anju T Sudhakar <[email protected]>
Reviewed-by: Kajol Jain <[email protected]>
Reviewed-by: Madhavan Srinivasan <[email protected]>
Reviewed--by: Ravi Bangoria <[email protected]>
Tested-by: Ravi Bangoria <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Michael Ellerman <[email protected]>
Cc: Michael Neuling <[email protected]> <[email protected]>
Cc: Ravi Bangoria <[email protected]>
Cc: [email protected]
[Decide extended mask at run time based on platform]
Signed-off-by: Athira Jajeev <[email protected]>
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
On PAPR+ the hcall() on 0x1B0 is called H_DISABLE_AND_GET, but got
defined as H_DISABLE_AND_GETC instead.
This define was introduced with a typo in commit <b13a96cfb055>
("[PATCH] powerpc: Extends HCALL interface for InfiniBand usage"), and was
later used without having the typo noticed.
Signed-off-by: Leonardo Bras <[email protected]>
Acked-by: Paul Mackerras <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Now that the ->compat_{get,set}sockopt proto_ops methods are gone
there is no good reason left to keep the compat syscalls separate.
This fixes the odd use of unsigned int for the compat_setsockopt
optlen and the missing sock_use_custom_sol_socket.
It would also easily allow running the eBPF hooks for the compat
syscalls, but such a large change in behavior does not belong into
a consolidation patch like this one.
Signed-off-by: Christoph Hellwig <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
This is currently working due to extra include paths in the build.
Before:
$ cd tools/perf/arch/arm64/util
$ ls -la ../../util/unwind-libdw.h
ls: cannot access '../../util/unwind-libdw.h': No such file or directory
After:
$ ls -la ../../../util/unwind-libdw.h
-rw-r----- 1 irogers irogers 553 Apr 17 14:31 ../../../util/unwind-libdw.h
Signed-off-by: Ian Rogers <[email protected]>
Acked-by: Namhyung Kim <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Commit 7eec00a74720 ("perf symbols: Consolidate symbol fixup issue")
removed powerpc specific sym-handling.c file from Build. This wasn't
caught by build CI because all functions in this file are declared
as __weak in common code. Fix it.
Fixes: 7eec00a74720 ("perf symbols: Consolidate symbol fixup issue")
Reported-by: Sandipan Das <[email protected]>
Signed-off-by: Ravi Bangoria <[email protected]>
Reviewed-by: Leo Yan <[email protected]>
Reviewed-by: Naveen N. Rao <[email protected]>
Acked-by: Sandipan Das <[email protected]>
Cc: Jiri Olsa <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
metehods to to evsel__*()
As those are not 'struct evsel' methods, not part of tools/lib/perf/,
aka libperf, to whom the perf_ prefix belongs.
Cc: Adrian Hunter <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Patch enhances current metric infrastructure to handle "?" in the metric
expression. The "?" can be use for parameters whose value not known
while creating metric events and which can be replace later at runtime
to the proper value. It also add flexibility to create multiple events
out of single metric event added in JSON file.
Patch adds function 'arch_get_runtimeparam' which is a arch specific
function, returns the count of metric events need to be created. By
default it return 1.
This infrastructure needed for hv_24x7 socket/chip level events.
"hv_24x7" chip level events needs specific chip-id to which the data is
requested. Function 'arch_get_runtimeparam' implemented in header.c
which extract number of sockets from sysfs file "sockets" under
"/sys/devices/hv_24x7/interface/".
With this patch basically we are trying to create as many metric events
as define by runtime_param.
For that one loop is added in function 'metricgroup__add_metric', which
create multiple events at run time depend on return value of
'arch_get_runtimeparam' and merge that event in 'group_list'.
To achieve that we are actually passing this parameter value as part of
`expr__find_other` function and changing "?" present in metric
expression with this value.
As in our JSON file, there gonna be single metric event, and out of
which we are creating multiple events.
To understand which data count belongs to which parameter value,
we also printing param value in generic_metric function.
For example,
command:# ./perf stat -M PowerBUS_Frequency -C 0 -I 1000
1.000101867 9,356,933 hv_24x7/pm_pb_cyc,chip=0/ # 2.3 GHz PowerBUS_Frequency_0
1.000101867 9,366,134 hv_24x7/pm_pb_cyc,chip=1/ # 2.3 GHz PowerBUS_Frequency_1
2.000314878 9,365,868 hv_24x7/pm_pb_cyc,chip=0/ # 2.3 GHz PowerBUS_Frequency_0
2.000314878 9,366,092 hv_24x7/pm_pb_cyc,chip=1/ # 2.3 GHz PowerBUS_Frequency_1
So, here _0 and _1 after PowerBUS_Frequency specify parameter value.
Signed-off-by: Kajol Jain <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Anju T Sudhakar <[email protected]>
Cc: Benjamin Herrenschmidt <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Cc: Jin Yao <[email protected]>
Cc: Joe Mario <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Madhavan Srinivasan <[email protected]>
Cc: Mamatha Inamdar <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Michael Ellerman <[email protected]>
Cc: Michael Petlan <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Ravi Bangoria <[email protected]>
Cc: Sukadev Bhattiprolu <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: [email protected]
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
After copying Arm64's perf archive with object files and perf.data file
to x86 laptop, the x86's perf kernel symbol resolution fails. It
outputs 'unknown' for all symbols parsing.
This issue is root caused by the function elf__needs_adjust_symbols(),
x86 perf tool uses one weak version, Arm64 (and powerpc) has rewritten
their own version. elf__needs_adjust_symbols() decides if need to parse
symbols with the relative offset address; but x86 building uses the weak
function which misses to check for the elf type 'ET_DYN', so that it
cannot parse symbols in Arm DSOs due to the wrong result from
elf__needs_adjust_symbols().
The DSO parsing should not depend on any specific architecture perf
building; e.g. x86 perf tool can parse Arm and Arm64 DSOs, vice versa.
And confirmed by Naveen N. Rao that powerpc64 kernels are not being
built as ET_DYN anymore and change to ET_EXEC.
This patch removes the arch specific functions for Arm64 and powerpc and
changes elf__needs_adjust_symbols() as a common function.
In the common elf__needs_adjust_symbols(), it checks an extra condition
'ET_DYN' for elf header type. With this fixing, the Arm64 DSO can be
parsed properly with x86's perf tool.
Before:
# perf script
main 3258 1 branches: 0 [unknown] ([unknown]) => ffff800010c4665c [unknown] ([kernel.kallsyms])
main 3258 1 branches: ffff800010c46670 [unknown] ([kernel.kallsyms]) => ffff800010c4eaec [unknown] ([kernel.kallsyms])
main 3258 1 branches: ffff800010c4eaec [unknown] ([kernel.kallsyms]) => ffff800010c4eb00 [unknown] ([kernel.kallsyms])
main 3258 1 branches: ffff800010c4eb08 [unknown] ([kernel.kallsyms]) => ffff800010c4e780 [unknown] ([kernel.kallsyms])
main 3258 1 branches: ffff800010c4e7a0 [unknown] ([kernel.kallsyms]) => ffff800010c4eeac [unknown] ([kernel.kallsyms])
main 3258 1 branches: ffff800010c4eebc [unknown] ([kernel.kallsyms]) => ffff800010c4ed80 [unknown] ([kernel.kallsyms])
After:
# perf script
main 3258 1 branches: 0 [unknown] ([unknown]) => ffff800010c4665c coresight_timeout+0x54 ([kernel.kallsyms])
main 3258 1 branches: ffff800010c46670 coresight_timeout+0x68 ([kernel.kallsyms]) => ffff800010c4eaec etm4_enable_hw+0x3cc ([kernel.kallsyms])
main 3258 1 branches: ffff800010c4eaec etm4_enable_hw+0x3cc ([kernel.kallsyms]) => ffff800010c4eb00 etm4_enable_hw+0x3e0 ([kernel.kallsyms])
main 3258 1 branches: ffff800010c4eb08 etm4_enable_hw+0x3e8 ([kernel.kallsyms]) => ffff800010c4e780 etm4_enable_hw+0x60 ([kernel.kallsyms])
main 3258 1 branches: ffff800010c4e7a0 etm4_enable_hw+0x80 ([kernel.kallsyms]) => ffff800010c4eeac etm4_enable+0x2d4 ([kernel.kallsyms])
main 3258 1 branches: ffff800010c4eebc etm4_enable+0x2e4 ([kernel.kallsyms]) => ffff800010c4ed80 etm4_enable+0x1a8 ([kernel.kallsyms])
v3: Changed to check for ET_DYN across all architectures.
v2: Fixed Arm64 and powerpc native building.
Reported-by: Mike Leach <[email protected]>
Signed-off-by: Leo Yan <[email protected]>
Reviewed-by: Naveen N. Rao <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Allison Randal <[email protected]>
Cc: Enrico Weigelt <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Cc: Hendrik Brueckner <[email protected]>
Cc: John Garry <[email protected]>
Cc: Kate Stewart <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Mathieu Poirier <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Thomas Richter <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
This is currently working due to extra include paths in the build.
Committer testing:
$ cd tools/include/uapi/asm/
Before this patch:
$ ls -la ../../arch/x86/include/uapi/asm/errno.h
ls: cannot access '../../arch/x86/include/uapi/asm/errno.h': No such file or directory
$
After this patch;
$ ls -la ../../../arch/x86/include/uapi/asm/errno.h
-rw-rw-r--. 1 acme acme 31 Feb 20 12:42 ../../../arch/x86/include/uapi/asm/errno.h
$
Check that that is still under tools/, i.e. hasn't escaped into the main
kernel sources:
$ cd ../../../arch/x86/include/uapi/asm/
$ pwd
/home/acme/git/perf/tools/arch/x86/include/uapi/asm
$
Signed-off-by: Ian Rogers <[email protected]>
Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Alexios Zavras <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Cc: Igor Lubashev <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Mathieu Poirier <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Nick Desaulniers <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Wei Li <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Copy over powerpc syscall.tbl to grab changes from the below commits
fddb5d430ad9 ("open: introduce openat2(2) syscall")
9a2cef09c801 ("arch: wire up pidfd_getfd syscall")
Now 'perf trace' on powerpc will be able to map from those syscall
strings to the right syscall numbers, i.e.
perf trace -e pidfd*
Will include 'pidfd_getfd' as well as:
perf trace open*
Will cover all 'open' variants.
Reported-by: Stephen Rothwell <[email protected]>
Reviewed-by: Ravi Bangoria <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Aleksa Sarai <[email protected]>
Cc: Al Viro <[email protected]>
Cc: Christian Brauner <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Naveen N. Rao <[email protected]>
Cc: Nicholas Piggin <[email protected]>
Cc: Sargun Dhillon <[email protected]>
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
One more step in the merge of 'struct maps' with 'struct map_groups'.
Cc: Adrian Hunter <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Link: https://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
One more step on the merge of 'struct maps' with 'struct map_groups'.
Cc: Adrian Hunter <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Link: https://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
And pick the shortest name: 'struct maps'.
The split existed because we used to have two groups of maps, one for
functions and one for variables, but that only complicated things,
sometimes we needed to figure out what was at some address and then had
to first try it on the functions group and if that failed, fall back to
the variables one.
That split is long gone, so for quite a while we had only one struct
maps per struct map_groups, simplify things by combining those structs.
First patch is the minimum needed to merge both, follow up patches will
rename 'thread->mg' to 'thread->maps', etc.
Cc: Adrian Hunter <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Link: https://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Record the first event parsing error and report. Implementing feedback
from Jiri Olsa:
https://lkml.org/lkml/2019/10/28/680
An example error is:
$ tools/perf/perf stat -e c/c/
WARNING: multiple event parsing errors
event syntax error: 'c/c/'
\___ unknown term
valid terms: event,filter_rem,filter_opc0,edge,filter_isoc,filter_tid,filter_loc,filter_nc,inv,umask,filter_opc1,tid_en,thresh,filter_all_op,filter_not_nm,filter_state,filter_nm,config,config1,config2,name,period,percore
Initial error:
event syntax error: 'c/c/'
\___ Cannot find PMU `c'. Missing kernel support?
Run 'perf list' for a list of valid events
Usage: perf stat [<options>] [<command>]
-e, --event <event> event selector. use 'perf list' to list available events
Signed-off-by: Ian Rogers <[email protected]>
Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Allison Randal <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Anju T Sudhakar <[email protected]>
Cc: Christian Borntraeger <[email protected]>
Cc: Davidlohr Bueso <[email protected]>
Cc: Jin Yao <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Ravi Bangoria <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Thomas Richter <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
For consistency, propagate the exact cause for get_cpuid() to have
failed.
Cc: Adrian Hunter <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Link: https://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
powerpc
Use 'trace_imc/trace_cycles' as the default event for 'perf kvm record'
in powerpc.
Signed-off-by: Anju T Sudhakar <[email protected]>
Reviewed-by: Ravi Bangoria <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Madhavan Srinivasan <[email protected]>
Cc: Michael Ellerman <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: [email protected]
Link: http://lore.kernel.org/lkml/[email protected]
[ Add missing pmu.h header, needed because this patch uses pmu_have_event() ]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
'perf kvm record' uses 'cycles'(if the user did not specify any event)
as the default event to profile the guest.
This will not provide any proper samples from the guest incase of
powerpc architecture, since in powerpc the PMUs are controlled by the
guest rather than the host.
Patch adds a function to pick an arch specific event for 'perf kvm
record', instead of selecting 'cycles' as a default event for all
architectures.
For powerpc this function checks for any user specified event, and if
there isn't any it returns invalid instead of proceeding with 'cycles'
event.
Signed-off-by: Anju T Sudhakar <[email protected]>
Reviewed-by: Ravi Bangoria <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Madhavan Srinivasan <[email protected]>
Cc: Michael Ellerman <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: [email protected]
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
All we need is a bunch of struct forward declarations and then add
event.h to the only place that was getting it indirectly via
callchain.h.
Cc: Adrian Hunter <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Link: https://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Check that it is not needed and remove, fixing up some fallout for
places where it was only serving to get something else.
Cc: Adrian Hunter <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Link: https://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Pruning a bit more the includes dependency tree. Building this thing on
lots of containers takes time, we better reduce the time per build, each
container is doing 6 builds when clang and clang-devel are available,
and the plan is to do a 'make -C tools/perf build-test' that have many
more.
Also helps when doing normal development, as touching some random file
will have a much reduced chance of triggering lots of rebuilds.
Cc: Adrian Hunter <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Link: https://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The mem_info struct goes to mem-events.h and branch_info goes to
branch.h, where they belong, this way we can remove several headers from
symbols.h and trim the include dependency tree more.
Cc: Adrian Hunter <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Link: https://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
So that we can remove dso.h from symbol.h and reduce the header
dependency tree.
Fixup cases where struct dso guts are needed but were obtained via
symbol.h, indirectly.
Cc: Adrian Hunter <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Link: https://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
bpf.h and build-id.h are not needed at all in event.h, remove them.
And fixup the fallout of files that were getting needed stuff from this
now pruned include.
Cc: Adrian Hunter <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Link: https://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
With the movement of lots of stuff out of perf.h to other headers we
ended up not needing it in lots of places, remove it from those places.
Cc: Adrian Hunter <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Link: https://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Copy over powerpc syscall.tbl to grab changes from the below commits:
commit cee3536d24a1 ("powerpc: Wire up clone3 syscall")
commit 1a271a68e030 ("arch: mark syscall number 435 reserved for clone3")
commit 7615d9e1780e ("arch: wire-up pidfd_open()")
commit d8076bdb56af ("uapi: Wire up the mount API syscalls on non-x86 arches [ver #2]")
commit 39036cd27273 ("arch: add pidfd and io_uring syscalls everywhere")
commit 48166e6ea47d ("y2038: add 64-bit time_t syscalls to all 32-bit architectures")
commit d33c577cccd0 ("y2038: rename old time and utime syscalls")
commit 00bf25d693e7 ("y2038: use time32 syscall names on 32-bit")
commit 8dabe7245bbc ("y2038: syscalls: rename y2038 compat syscalls")
commit 0d6040d46817 ("arch: add split IPC system calls where needed")
Reported-by: Nicholas Piggin <[email protected]>
Signed-off-by: Naveen N. Rao <[email protected]>
Cc: Ravi Bangoria <[email protected]>
Cc: [email protected]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Rename perf_evlist__new() to evlist__new(), so we don't have a name
clash when we add perf_evlist__new() in libperf.
Signed-off-by: Jiri Olsa <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Alexey Budankov <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Michael Petlan <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Rename struct perf_evlist to struct evlist, so we don't have a name
clash when we add struct perf_evlist in libperf.
Committer notes:
Added fixes to build on arm64, from Jiri and from me
(tools/perf/util/cs-etm.c)
Signed-off-by: Jiri Olsa <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Alexey Budankov <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Michael Petlan <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Rename struct perf_evsel to struct evsel, so we don't have a name clash
when we add struct perf_evsel in libperf.
Committer notes:
Added fixes for arm64, provided by Jiri.
Signed-off-by: Jiri Olsa <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Alexey Budankov <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Michael Petlan <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Eroding a bit more the tools/perf/util/util.h hodpodge header.
Cc: Adrian Hunter <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Link: https://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Part of the erosion of util/util.h, that will lose its include stdlib.h,
we need to add it to places where it is needed but was getting it
indirectly.
Cc: Adrian Hunter <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Link: https://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Based on 2 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation #
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 4122 file(s).
Signed-off-by: Thomas Gleixner <[email protected]>
Reviewed-by: Enrico Weigelt <[email protected]>
Reviewed-by: Kate Stewart <[email protected]>
Reviewed-by: Allison Randal <[email protected]>
Cc: [email protected]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 3029 file(s).
Signed-off-by: Thomas Gleixner <[email protected]>
Reviewed-by: Allison Randal <[email protected]>
Cc: [email protected]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Rename build libperf to perf, because it's used to build perf.
The libperf build object name will be used for libperf library.
Signed-off-by: Jiri Olsa <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core
Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:
Hardware tracing:
Adrian Hunter:
- Handle calls optimized into jumps to a different symbol
in the thread stack routines used to process hardware traces (Adrian Hunter)
Intel PT:
Adrian Hunter:
- Fix overlap calculation for padding.
- Fix CYC timestamp calculation after OVF.
- Packet splitting can only happen in 32-bit.
- Add timestamp to auxtrace errors.
ARM CoreSight:
Leo Yan:
- Add last instruction information in packet
- Set sample flags for instruction range, exception and
return packets and for a trace discontinuity.
- Add exception number in exception packet
- Change tuple from traceID-CPU# to traceID-metadata
- Add traceID in packet
Mathieu Poirier:
- Add "sinks" group to PMU directory
- Use event attributes to send sink information to kernel
- Remove set_drv_config() API, no longer used.
perf annotate:
Jiri Olsa:
- Delay symbol annotation to the resort phase, speeding up 'perf report'
startup.
perf record:
Alexey Budankov:
- Allow binding userspace buffers to NUMA nodes.
Symbols:
Adrian Hunter:
- Fix calculating of symbol sizes when splitting kallsyms into
maps for kcore processing.
Vendor events:
William Cohen:
- Intel: Fix Load_Miss_Real_Latency on CLX
Misc:
Arnaldo Carvalho de Melo:
- Streamline headers, removing includes when all that is needed are
just forward declarations, fixup the fallout for cases where headers
should have been explicitely included but were instead obtained
indirectly, by sheer luck.
- Add fallback versions for CPU_{OR,EQUAL}(), so that code using it
continue to build on older systems where those were not yet introduced
or in systems using some other libc than the GNU one where those
helpers aren't present.
Documentation:
Changbin Du:
- Add documentation for BPF event selection.
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
|
|
This header was being obtained indirectly, by sheer luck, add it.
Cc: Adrian Hunter <[email protected]>
Cc: Hemant Kumar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Link: https://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
To reduce the include header dependency tree and speed up perf builds.
Cc: Adrian Hunter <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Link: https://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
And since machine.h only needs what is in there, make it stop including
map.h and instead include this newly introduced map_groups.h instead.
Cc: Adrian Hunter <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Link: https://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
It uses several structs but don't explicitely includes the headers where
they are defined, getting them by sheer luck from one of the headers it
includes, since those are being streamlined to avoid unnecessary
rebuilds when changes are made to a random header, they will break, fix
them now so that they continue to build.
Cc: Adrian Hunter <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Maynard Johnson <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Naveen N. Rao <[email protected]>
Cc: Ravi Bangoria <[email protected]>
Cc: Sandipan Das <[email protected]>
Cc: Sukadev Bhattiprolu <[email protected]>
Link: https://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
PowerPC hardware does not have a builtin latency filter (--ldlat) for
the "mem-load" event and perf_mem_events by default includes
"/ldlat=30/" which is causing a failure on PowerPC. Refactor the code to
support "perf mem/c2c" on PowerPC.
This patch depends on kernel side changes done my Madhavan:
https://lists.ozlabs.org/pipermail/linuxppc-dev/2018-December/182596.html
Signed-off-by: Ravi Bangoria <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Cc: Dick Fowles <[email protected]>
Cc: Don Zickus <[email protected]>
Cc: Joe Mario <[email protected]>
Cc: Madhavan Srinivasan <[email protected]>
Cc: Michael Ellerman <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: [email protected]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"A couple of weeks of fixes.
There's one fix for an oops on Power9 machines with Open CAPI
adapters.
And a fix for probable memory corruption in some of the new NPU code,
caught by smatch though and not seen in the wild.
Plus a few other minor fixes.
There's one non-fix which is the perf_regs change. That was sent
during the merge window but I accidentally only merged the first of
two patches in the series. It's been in linux-next so hopefully
doesn't conflict with anything in acme's tree.
Thanks to: Alexey Kardashevskiy, Andrew Donnellan, Breno Leitao,
Christian Lamparter, Christophe Leroy, Dan Carpenter, Frederic Barrat,
Greg Kurz, Jason A. Donenfeld, Madhavan Srinivasan"
* tag 'powerpc-5.0-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/syscalls: Fix syscall tracing
powerpc/pseries: Fix build break due to pnv_npu2_init()
powerpc/4xx/ocm: Fix fix for phys_addr_t printf warnings
powerpc/powernv/npu: Fix oops in pnv_try_setup_npu_table_group()
powerpc/tm: Limit TM code inside PPC_TRANSACTIONAL_MEM
powerpc/8xx: fix setting of pagetable for Abatron BDI debug tool.
powerpc/powernv/npu: Allocate enough memory in pnv_try_setup_npu_table_group()
powerpc/perf: Update perf_regs structure to include MMCRA
|
|
Commit aff850393200 ("powerpc: add system call table generation
support") changed how systemcall table is generated for powerpc.
Incorporate these changes into perf as well.
Committer testing:
$ podman run --entrypoint=/bin/sh --privileged -v /home/acme/git:/git --rm -ti docker.io/acmel/linux-perf-tools-build-ubuntu:18.04-x-powerpc64
perfbuilder@d7a7af166a80:/git/perf$ head -2 /etc/os-release
NAME="Ubuntu"
VERSION="18.04.1 LTS (Bionic Beaver)"
perfbuilder@d7a7af166a80:/git/perf$
perfbuilder@d7a7af166a80:/git/perf$ make ARCH=powerpc CROSS_COMPILE=powerpc64-linux-gnu- EXTRA_CFLAGS= -C /git/linux/tools/perf O=/tmp/build/perf
make: Entering directory '/git/linux/tools/perf'
BUILD: Doing 'make -j8' parallel build
HOSTCC /tmp/build/perf/fixdep.o
HOSTLD /tmp/build/perf/fixdep-in.o
LINK /tmp/build/perf/fixdep
Warning: Kernel ABI header at 'tools/include/uapi/linux/mman.h' differs from latest version at 'include/uapi/linux/mman.h'
diff -u tools/include/uapi/linux/mman.h include/uapi/linux/mman.h
sh: 1: command: Illegal option -c
Auto-detecting system features:
... dwarf: [ on ]
... dwarf_getlocations: [ on ]
... glibc: [ on ]
... gtk2: [ OFF ]
... libaudit: [ OFF ]
... libbfd: [ OFF ]
... libelf: [ on ]
... libnuma: [ OFF ]
... numa_num_possible_cpus: [ OFF ]
... libperl: [ OFF ]
... libpython: [ OFF ]
... libslang: [ OFF ]
... libcrypto: [ OFF ]
... libunwind: [ OFF ]
... libdw-dwarf-unwind: [ on ]
... zlib: [ on ]
... lzma: [ OFF ]
... get_cpuid: [ OFF ]
... bpf: [ on ]
Makefile.config:445: No sys/sdt.h found, no SDT events are defined, please install systemtap-sdt-devel or systemtap-sdt-dev
Makefile.config:491: No libunwind found. Please install libunwind-dev[el] >= 1.1 and/or set LIBUNWIND_DIR
Makefile.config:583: No libcrypto.h found, disables jitted code injection, please install libssl-devel or libssl-dev
Makefile.config:598: slang not found, disables TUI support. Please install slang-devel, libslang-dev or libslang2-dev
Makefile.config:612: GTK2 not found, disables GTK2 support. Please install gtk2-devel or libgtk2.0-dev
Makefile.config:639: Missing perl devel files. Disabling perl scripting support, please install perl-ExtUtils-Embed/libperl-dev
Makefile.config:666: No python interpreter was found: disables Python support - please install python-devel/python-dev
Makefile.config:721: No bfd.h/libbfd found, please install binutils-dev[el]/zlib-static/libiberty-dev to gain symbol demangling
Makefile.config:750: No liblzma found, disables xz kernel module decompression, please install xz-devel/liblzma-dev
Makefile.config:763: No numa.h found, disables 'perf bench numa mem' benchmark, please install numactl-devel/libnuma-devel/libnuma-dev
Makefile.config:814: No libbabeltrace found, disables 'perf data' CTF format support, please install libbabeltrace-dev[el]/libbabeltrace-ctf-dev
Makefile.config:840: No alternatives command found, you need to set JDIR= to point to the root of your Java directory
GEN /tmp/build/perf/common-cmds.h
<SNIP>
CC /tmp/build/perf/util/syscalltbl.o
<SNIP>
LD /tmp/build/perf/libperf-in.o
AR /tmp/build/perf/libperf.a
LINK /tmp/build/perf/perf
make: Leaving directory '/git/linux/tools/perf'
perfbuilder@d7a7af166a80:/git/perf$ head /tmp/build/perf/arch/powerpc/include/generated/asm/syscalls_64.c
static const char *syscalltbl_powerpc_64[] = {
[0] = "restart_syscall",
[1] = "exit",
[2] = "fork",
[3] = "read",
[4] = "write",
[5] = "open",
[6] = "close",
[7] = "waitpid",
[8] = "creat",
perfbuilder@d7a7af166a80:/git/perf$ tail /tmp/build/perf/arch/powerpc/include/generated/asm/syscalls_64.c
[381] = "pwritev2",
[382] = "kexec_file_load",
[383] = "statx",
[384] = "pkey_alloc",
[385] = "pkey_free",
[386] = "pkey_mprotect",
[387] = "rseq",
[388] = "io_pgetevents",
};
#define SYSCALLTBL_POWERPC_64_MAX_ID 388
perfbuilder@d7a7af166a80:/git/perf$ head /tmp/build/perf/arch/powerpc/include/generated/asm/syscalls_32.c
static const char *syscalltbl_powerpc_32[] = {
[0] = "restart_syscall",
[1] = "exit",
[2] = "fork",
[3] = "read",
[4] = "write",
[5] = "open",
[6] = "close",
[7] = "waitpid",
[8] = "creat",
perfbuilder@d7a7af166a80:/git/perf$ tail /tmp/build/perf/arch/powerpc/include/generated/asm/syscalls_32.c
[381] = "pwritev2",
[382] = "kexec_file_load",
[383] = "statx",
[384] = "pkey_alloc",
[385] = "pkey_free",
[386] = "pkey_mprotect",
[387] = "rseq",
[388] = "io_pgetevents",
};
#define SYSCALLTBL_POWERPC_32_MAX_ID 388
perfbuilder@d7a7af166a80:/git/perf$
Signed-off-by: Ravi Bangoria <[email protected]>
Reported-by: Arnaldo Carvalho de Melo <[email protected]>
Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Michael Ellerman <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: [email protected]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
On each sample, Monitor Mode Control Register A (MMCRA) content is
saved in pt_regs. MMCRA does not have a entry as-is in the pt_regs but
instead, MMCRA content is saved in the "dsisr" register of pt_regs.
Patch adds another entry to the perf_regs structure to include the
"MMCRA" printing which internally maps to the "dsisr" of pt_regs.
It also check for the MMCRA availability in the platform and present
value accordingly
mpe: This was the 2nd patch in a series with commit 333804dc3b7a
("powerpc/perf: Update perf_regs structure to include SIER") but I
accidentally only merged the 1st patch, so merge this one now.
Signed-off-by: Madhavan Srinivasan <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
|
|
On each sample, Sample Instruction Event Register (SIER) content
is saved in pt_regs. SIER does not have a entry as-is in the pt_regs
but instead, SIER content is saved in the "dar" register of pt_regs.
Patch adds another entry to the perf_regs structure to include the "SIER"
printing which internally maps to the "dar" of pt_regs.
It also check for the SIER availability in the platform and present
value accordingly
Signed-off-by: Madhavan Srinivasan <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
|
|
This merges in the "ppc-kvm" topic branch of the powerpc tree to get a
series of commits that touch both general arch/powerpc code and KVM
code. These commits will be merged both via the KVM tree and the
powerpc tree.
Signed-off-by: Paul Mackerras <[email protected]>
|
|
Currently we use two bits in the vcpu pending_exceptions bitmap to
indicate that an external interrupt is pending for the guest, one
for "one-shot" interrupts that are cleared when delivered, and one
for interrupts that persist until cleared by an explicit action of
the OS (e.g. an acknowledge to an interrupt controller). The
BOOK3S_IRQPRIO_EXTERNAL bit is used for one-shot interrupt requests
and BOOK3S_IRQPRIO_EXTERNAL_LEVEL is used for persisting interrupts.
In practice BOOK3S_IRQPRIO_EXTERNAL never gets used, because our
Book3S platforms generally, and pseries in particular, expect
external interrupt requests to persist until they are acknowledged
at the interrupt controller. That combined with the confusion
introduced by having two bits for what is essentially the same thing
makes it attractive to simplify things by only using one bit. This
patch does that.
With this patch there is only BOOK3S_IRQPRIO_EXTERNAL, and by default
it has the semantics of a persisting interrupt. In order to avoid
breaking the ABI, we introduce a new "external_oneshot" flag which
preserves the behaviour of the KVM_INTERRUPT ioctl with the
KVM_INTERRUPT_SET argument.
Reviewed-by: David Gibson <[email protected]>
Signed-off-by: Paul Mackerras <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
|
|
This makes sure that the SyS symbols are ignored for any powerpc system,
not just the big endian ones.
Reported-by: Naveen N. Rao <[email protected]>
Signed-off-by: Sandipan Das <[email protected]>
Reviewed-by: Kamalesh Babulal <[email protected]>
Acked-by: Naveen N. Rao <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Ravi Bangoria <[email protected]>
Fixes: fb6d59423115 ("perf probe ppc: Use the right prefix when ignoring SyS symbols on ppc")
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
In some cases, a symbol may have multiple aliases. Attempting to add an
entry probe for such symbols results in a probe being added at an
incorrect location while it fails altogether for return probes. This is
only applicable for binaries with debug information.
During the arch-dependent post-processing, the offset from the start of
the symbol at which the probe is to be attached is determined and added
to the start address of the symbol to get the probe's location. In case
there are multiple aliases, this offset gets added multiple times for
each alias of the symbol and we end up with an incorrect probe location.
This can be verified on a powerpc64le system as shown below.
$ nm /lib/modules/$(uname -r)/build/vmlinux | grep "sys_open$"
...
c000000000414290 T __se_sys_open
c000000000414290 T sys_open
$ objdump -d /lib/modules/$(uname -r)/build/vmlinux | grep -A 10 "<__se_sys_open>:"
c000000000414290 <__se_sys_open>:
c000000000414290: 19 01 4c 3c addis r2,r12,281
c000000000414294: 70 c4 42 38 addi r2,r2,-15248
c000000000414298: a6 02 08 7c mflr r0
c00000000041429c: e8 ff a1 fb std r29,-24(r1)
c0000000004142a0: f0 ff c1 fb std r30,-16(r1)
c0000000004142a4: f8 ff e1 fb std r31,-8(r1)
c0000000004142a8: 10 00 01 f8 std r0,16(r1)
c0000000004142ac: c1 ff 21 f8 stdu r1,-64(r1)
c0000000004142b0: 78 23 9f 7c mr r31,r4
c0000000004142b4: 78 1b 7e 7c mr r30,r3
For both the entry probe and the return probe, the probe location
should be _text+4276888 (0xc000000000414298). Since another alias
exists for 'sys_open', the post-processing code will end up adding
the offset (8 for powerpc64le) twice and perf will attempt to add
the probe at _text+4276896 (0xc0000000004142a0) instead.
Before:
# perf probe -v -a sys_open
probe-definition(0): sys_open
symbol:sys_open file:(null) line:0 offset:0 return:0 lazy:(null)
0 arguments
Looking at the vmlinux_path (8 entries long)
Using /lib/modules/4.18.0-rc8+/build/vmlinux for symbols
Open Debuginfo file: /lib/modules/4.18.0-rc8+/build/vmlinux
Try to find probe point from debuginfo.
Symbol sys_open address found : c000000000414290
Matched function: __se_sys_open [2ad03a0]
Probe point found: __se_sys_open+0
Found 1 probe_trace_events.
Opening /sys/kernel/debug/tracing/kprobe_events write=1
Writing event: p:probe/sys_open _text+4276896
Added new event:
probe:sys_open (on sys_open)
...
# perf probe -v -a sys_open%return $retval
probe-definition(0): sys_open%return
symbol:sys_open file:(null) line:0 offset:0 return:1 lazy:(null)
0 arguments
Looking at the vmlinux_path (8 entries long)
Using /lib/modules/4.18.0-rc8+/build/vmlinux for symbols
Open Debuginfo file: /lib/modules/4.18.0-rc8+/build/vmlinux
Try to find probe point from debuginfo.
Symbol sys_open address found : c000000000414290
Matched function: __se_sys_open [2ad03a0]
Probe point found: __se_sys_open+0
Found 1 probe_trace_events.
Opening /sys/kernel/debug/tracing/README write=0
Opening /sys/kernel/debug/tracing/kprobe_events write=1
Parsing probe_events: p:probe/sys_open _text+4276896
Group:probe Event:sys_open probe:p
Writing event: r:probe/sys_open__return _text+4276896
Failed to write event: Invalid argument
Error: Failed to add events. Reason: Invalid argument (Code: -22)
After:
# perf probe -v -a sys_open
probe-definition(0): sys_open
symbol:sys_open file:(null) line:0 offset:0 return:0 lazy:(null)
0 arguments
Looking at the vmlinux_path (8 entries long)
Using /lib/modules/4.18.0-rc8+/build/vmlinux for symbols
Open Debuginfo file: /lib/modules/4.18.0-rc8+/build/vmlinux
Try to find probe point from debuginfo.
Symbol sys_open address found : c000000000414290
Matched function: __se_sys_open [2ad03a0]
Probe point found: __se_sys_open+0
Found 1 probe_trace_events.
Opening /sys/kernel/debug/tracing/kprobe_events write=1
Writing event: p:probe/sys_open _text+4276888
Added new event:
probe:sys_open (on sys_open)
...
# perf probe -v -a sys_open%return $retval
probe-definition(0): sys_open%return
symbol:sys_open file:(null) line:0 offset:0 return:1 lazy:(null)
0 arguments
Looking at the vmlinux_path (8 entries long)
Using /lib/modules/4.18.0-rc8+/build/vmlinux for symbols
Open Debuginfo file: /lib/modules/4.18.0-rc8+/build/vmlinux
Try to find probe point from debuginfo.
Symbol sys_open address found : c000000000414290
Matched function: __se_sys_open [2ad03a0]
Probe point found: __se_sys_open+0
Found 1 probe_trace_events.
Opening /sys/kernel/debug/tracing/README write=0
Opening /sys/kernel/debug/tracing/kprobe_events write=1
Parsing probe_events: p:probe/sys_open _text+4276888
Group:probe Event:sys_open probe:p
Writing event: r:probe/sys_open__return _text+4276888
Added new event:
probe:sys_open__return (on sys_open%return)
...
Reported-by: Aneesh Kumar <[email protected]>
Signed-off-by: Sandipan Das <[email protected]>
Acked-by: Naveen N. Rao <[email protected]>
Cc: Aneesh Kumar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Ravi Bangoria <[email protected]>
Fixes: 99e608b5954c ("perf probe ppc64le: Fix probe location when using DWARF")
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
For powerpc64, perf will filter out the second entry in the callchain,
i.e. the LR value, if the return address of the function corresponding
to the probed location has already been saved on its caller's stack.
The state of the return address is determined using debug information.
At any point within a function, if the return address is already saved
somewhere, a DWARF expression can tell us about its location. If the
return address in still in LR only, no DWARF expression would exist.
Typically, the instructions in a function's prologue first copy the LR
value to R0 and then pushes R0 on to the stack. If LR has already been
copied to R0 but R0 is yet to be pushed to the stack, we can still get a
DWARF expression that says that the return address is in R0. This is
indicating that getting a DWARF expression for the return address does
not guarantee the fact that it has already been saved on the stack.
This can be observed on a powerpc64le system running Fedora 27 as shown
below.
# objdump -d /usr/lib64/libc-2.26.so | less
...
000000000015af20 <inet_pton>:
15af20: 0b 00 4c 3c addis r2,r12,11
15af24: e0 c1 42 38 addi r2,r2,-15904
15af28: a6 02 08 7c mflr r0
15af2c: f0 ff c1 fb std r30,-16(r1)
15af30: f8 ff e1 fb std r31,-8(r1)
15af34: 78 1b 7f 7c mr r31,r3
15af38: 78 23 83 7c mr r3,r4
15af3c: 78 2b be 7c mr r30,r5
15af40: 10 00 01 f8 std r0,16(r1)
15af44: c1 ff 21 f8 stdu r1,-64(r1)
15af48: 28 00 81 f8 std r4,40(r1)
...
# readelf --debug-dump=frames-interp /usr/lib64/libc-2.26.so | less
...
00027024 0000000000000024 00027028 FDE cie=00000000 pc=000000000015af20..000000000015af88
LOC CFA r30 r31 ra
000000000015af20 r1+0 u u u
000000000015af34 r1+0 c-16 c-8 r0
000000000015af48 r1+64 c-16 c-8 c+16
000000000015af5c r1+0 c-16 c-8 c+16
000000000015af78 r1+0 u u
...
# perf probe -x /usr/lib64/libc-2.26.so -a inet_pton+0x18
# perf record -e probe_libc:inet_pton -g ping -6 -c 1 ::1
# perf script
Before:
ping 2829 [005] 512917.460174: probe_libc:inet_pton: (7fff7e2baf38)
7fff7e2baf38 __GI___inet_pton+0x18 (/usr/lib64/libc-2.26.so)
7fff7e2705b4 getaddrinfo+0x164 (/usr/lib64/libc-2.26.so)
12f152d70 _init+0xbfc (/usr/bin/ping)
7fff7e1836a0 generic_start_main.isra.0+0x140 (/usr/lib64/libc-2.26.so)
7fff7e183898 __libc_start_main+0xb8 (/usr/lib64/libc-2.26.so)
0 [unknown] ([unknown])
After:
ping 2829 [005] 512917.460174: probe_libc:inet_pton: (7fff7e2baf38)
7fff7e2baf38 __GI___inet_pton+0x18 (/usr/lib64/libc-2.26.so)
7fff7e26fa54 gaih_inet.constprop.7+0xf44 (/usr/lib64/libc-2.26.so)
7fff7e2705b4 getaddrinfo+0x164 (/usr/lib64/libc-2.26.so)
12f152d70 _init+0xbfc (/usr/bin/ping)
7fff7e1836a0 generic_start_main.isra.0+0x140 (/usr/lib64/libc-2.26.so)
7fff7e183898 __libc_start_main+0xb8 (/usr/lib64/libc-2.26.so)
0 [unknown] ([unknown])
Reported-by: Ravi Bangoria <[email protected]>
Signed-off-by: Sandipan Das <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Maynard Johnson <[email protected]>
Cc: Naveen N. Rao <[email protected]>
Cc: Ravi Bangoria <[email protected]>
Cc: Sukadev Bhattiprolu <[email protected]>
Link: http://lkml.kernel.org/r/66e848a7bdf2d43b39210a705ff6d828a0865661.1530724939.git.sandipan@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
For powerpc64, redundant entries in the callchain are filtered out by
determining the state of the return address and the stack frame using
DWARF debug information.
For making these filtering decisions we must analyze the debug
information for the location corresponding to the program counter value,
i.e. the first entry in the callchain, and not the LR value; otherwise,
perf may filter out either the second or the third entry in the
callchain incorrectly.
This can be observed on a powerpc64le system running Fedora 27 as shown
below.
Case 1 - Attaching a probe at inet_pton+0x8 (binary offset 0x15af28).
Return address is still in LR and a new stack frame is not yet
allocated. The LR value, i.e. the second entry, should not be
filtered out.
# objdump -d /usr/lib64/libc-2.26.so | less
...
000000000010eb10 <gaih_inet.constprop.7>:
...
10fa48: 78 bb e4 7e mr r4,r23
10fa4c: 0a 00 60 38 li r3,10
10fa50: d9 b4 04 48 bl 15af28 <inet_pton+0x8>
10fa54: 00 00 00 60 nop
10fa58: ac f4 ff 4b b 10ef04 <gaih_inet.constprop.7+0x3f4>
...
0000000000110450 <getaddrinfo>:
...
1105a8: 54 00 ff 38 addi r7,r31,84
1105ac: 58 00 df 38 addi r6,r31,88
1105b0: 69 e5 ff 4b bl 10eb18 <gaih_inet.constprop.7+0x8>
1105b4: 78 1b 71 7c mr r17,r3
1105b8: 50 01 7f e8 ld r3,336(r31)
...
000000000015af20 <inet_pton>:
15af20: 0b 00 4c 3c addis r2,r12,11
15af24: e0 c1 42 38 addi r2,r2,-15904
15af28: a6 02 08 7c mflr r0
15af2c: f0 ff c1 fb std r30,-16(r1)
15af30: f8 ff e1 fb std r31,-8(r1)
...
# perf probe -x /usr/lib64/libc-2.26.so -a inet_pton+0x8
# perf record -e probe_libc:inet_pton -g ping -6 -c 1 ::1
# perf script
Before:
ping 4507 [002] 514985.546540: probe_libc:inet_pton: (7fffa7dbaf28)
7fffa7dbaf28 __GI___inet_pton+0x8 (/usr/lib64/libc-2.26.so)
7fffa7d705b4 getaddrinfo+0x164 (/usr/lib64/libc-2.26.so)
13fb52d70 _init+0xbfc (/usr/bin/ping)
7fffa7c836a0 generic_start_main.isra.0+0x140 (/usr/lib64/libc-2.26.so)
7fffa7c83898 __libc_start_main+0xb8 (/usr/lib64/libc-2.26.so)
0 [unknown] ([unknown])
After:
ping 4507 [002] 514985.546540: probe_libc:inet_pton: (7fffa7dbaf28)
7fffa7dbaf28 __GI___inet_pton+0x8 (/usr/lib64/libc-2.26.so)
7fffa7d6fa54 gaih_inet.constprop.7+0xf44 (/usr/lib64/libc-2.26.so)
7fffa7d705b4 getaddrinfo+0x164 (/usr/lib64/libc-2.26.so)
13fb52d70 _init+0xbfc (/usr/bin/ping)
7fffa7c836a0 generic_start_main.isra.0+0x140 (/usr/lib64/libc-2.26.so)
7fffa7c83898 __libc_start_main+0xb8 (/usr/lib64/libc-2.26.so)
0 [unknown] ([unknown])
Case 2 - Attaching a probe at _int_malloc+0x180 (binary offset 0x9cf10).
Return address in still in LR and a new stack frame has already
been allocated but not used. The caller's caller, i.e. the third
entry, is invalid and should be filtered out and not the second
one.
# objdump -d /usr/lib64/libc-2.26.so | less
...
000000000009cd90 <_int_malloc>:
9cd90: 17 00 4c 3c addis r2,r12,23
9cd94: 70 a3 42 38 addi r2,r2,-23696
9cd98: 26 00 80 7d mfcr r12
9cd9c: f8 ff e1 fb std r31,-8(r1)
9cda0: 17 00 e4 3b addi r31,r4,23
9cda4: d8 ff 61 fb std r27,-40(r1)
9cda8: 78 23 9b 7c mr r27,r4
9cdac: 1f 00 bf 2b cmpldi cr7,r31,31
9cdb0: f0 ff c1 fb std r30,-16(r1)
9cdb4: b0 ff c1 fa std r22,-80(r1)
9cdb8: 78 1b 7e 7c mr r30,r3
9cdbc: 08 00 81 91 stw r12,8(r1)
9cdc0: 11 ff 21 f8 stdu r1,-240(r1)
9cdc4: 4c 01 9d 41 bgt cr7,9cf10 <_int_malloc+0x180>
9cdc8: 20 00 a4 2b cmpldi cr7,r4,32
...
9cf08: 00 00 00 60 nop
9cf0c: 00 00 42 60 ori r2,r2,0
9cf10: e4 06 ff 7b rldicr r31,r31,0,59
9cf14: 40 f8 a4 7f cmpld cr7,r4,r31
9cf18: 68 05 9d 41 bgt cr7,9d480 <_int_malloc+0x6f0>
...
000000000009e3c0 <tcache_init.part.4>:
...
9e420: 40 02 80 38 li r4,576
9e424: 78 fb e3 7f mr r3,r31
9e428: 71 e9 ff 4b bl 9cd98 <_int_malloc+0x8>
9e42c: 00 00 a3 2f cmpdi cr7,r3,0
9e430: 78 1b 7e 7c mr r30,r3
...
000000000009f7a0 <__libc_malloc>:
...
9f8f8: 00 00 89 2f cmpwi cr7,r9,0
9f8fc: 1c ff 9e 40 bne cr7,9f818 <__libc_malloc+0x78>
9f900: c9 ea ff 4b bl 9e3c8 <tcache_init.part.4+0x8>
9f904: 00 00 00 60 nop
9f908: e8 90 22 e9 ld r9,-28440(r2)
...
# perf probe -x /usr/lib64/libc-2.26.so -a _int_malloc+0x180
# perf record -e probe_libc:_int_malloc -g ./test-malloc
# perf script
Before:
test-malloc 6554 [009] 515975.797403: probe_libc:_int_malloc: (7fffa6e6cf10)
7fffa6e6cf10 _int_malloc+0x180 (/usr/lib64/libc-2.26.so)
7fffa6dd0000 [unknown] (/usr/lib64/libc-2.26.so)
7fffa6e6f904 malloc+0x164 (/usr/lib64/libc-2.26.so)
7fffa6e6f9fc malloc+0x25c (/usr/lib64/libc-2.26.so)
100006b4 main+0x38 (/home/testuser/test-malloc)
7fffa6df36a0 generic_start_main.isra.0+0x140 (/usr/lib64/libc-2.26.so)
7fffa6df3898 __libc_start_main+0xb8 (/usr/lib64/libc-2.26.so)
0 [unknown] ([unknown])
After:
test-malloc 6554 [009] 515975.797403: probe_libc:_int_malloc: (7fffa6e6cf10)
7fffa6e6cf10 _int_malloc+0x180 (/usr/lib64/libc-2.26.so)
7fffa6e6e42c tcache_init.part.4+0x6c (/usr/lib64/libc-2.26.so)
7fffa6e6f904 malloc+0x164 (/usr/lib64/libc-2.26.so)
7fffa6e6f9fc malloc+0x25c (/usr/lib64/libc-2.26.so)
100006b4 main+0x38 (/home/sandipan/test-malloc)
7fffa6df36a0 generic_start_main.isra.0+0x140 (/usr/lib64/libc-2.26.so)
7fffa6df3898 __libc_start_main+0xb8 (/usr/lib64/libc-2.26.so)
0 [unknown] ([unknown])
Signed-off-by: Sandipan Das <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Maynard Johnson <[email protected]>
Cc: Naveen N. Rao <[email protected]>
Cc: Ravi Bangoria <[email protected]>
Cc: Sukadev Bhattiprolu <[email protected]>
Fixes: a60335ba3298 ("perf tools powerpc: Adjust callchain based on DWARF debug info")
Link: http://lkml.kernel.org/r/24bb726d91ed173aebc972ec3f41a2ef2249434e.1530724939.git.sandipan@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|