| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Pull kvm updates from Paolo Bonzini:
"This covers all architectures (except MIPS) so I don't expect any
other feature pull requests this merge window.
ARM:
- Add MTE support in guests, complete with tag save/restore interface
- Reduce the impact of CMOs by moving them in the page-table code
- Allow device block mappings at stage-2
- Reduce the footprint of the vmemmap in protected mode
- Support the vGIC on dumb systems such as the Apple M1
- Add selftest infrastructure to support multiple configuration and
apply that to PMU/non-PMU setups
- Add selftests for the debug architecture
- The usual crop of PMU fixes
PPC:
- Support for the H_RPT_INVALIDATE hypercall
- Conversion of Book3S entry/exit to C
- Bug fixes
S390:
- new HW facilities for guests
- make inline assembly more robust with KASAN and co
x86:
- Allow userspace to handle emulation errors (unknown instructions)
- Lazy allocation of the rmap (host physical -> guest physical
address)
- Support for virtualizing TSC scaling on VMX machines
- Optimizations to avoid shattering huge pages at the beginning of
live migration
- Support for initializing the PDPTRs without loading them from
memory
- Many TLB flushing cleanups
- Refuse to load if two-stage paging is available but NX is not (this
has been a requirement in practice for over a year)
- A large series that separates the MMU mode (WP/SMAP/SMEP etc.) from
CR0/CR4/EFER, using the MMU mode everywhere once it is computed
from the CPU registers
- Use PM notifier to notify the guest about host suspend or hibernate
- Support for passing arguments to Hyper-V hypercalls using XMM
registers
- Support for Hyper-V TLB flush hypercalls and enlightened MSR bitmap
on AMD processors
- Hide Hyper-V hypercalls that are not included in the guest CPUID
- Fixes for live migration of virtual machines that use the Hyper-V
"enlightened VMCS" optimization of nested virtualization
- Bugfixes (not many)
Generic:
- Support for retrieving statistics without debugfs
- Cleanups for the KVM selftests API"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (314 commits)
KVM: x86: rename apic_access_page_done to apic_access_memslot_enabled
kvm: x86: disable the narrow guest module parameter on unload
selftests: kvm: Allows userspace to handle emulation errors.
kvm: x86: Allow userspace to handle emulation errors
KVM: x86/mmu: Let guest use GBPAGES if supported in hardware and TDP is on
KVM: x86/mmu: Get CR4.SMEP from MMU, not vCPU, in shadow page fault
KVM: x86/mmu: Get CR0.WP from MMU, not vCPU, in shadow page fault
KVM: x86/mmu: Drop redundant rsvd bits reset for nested NPT
KVM: x86/mmu: Optimize and clean up so called "last nonleaf level" logic
KVM: x86: Enhance comments for MMU roles and nested transition trickiness
KVM: x86/mmu: WARN on any reserved SPTE value when making a valid SPTE
KVM: x86/mmu: Add helpers to do full reserved SPTE checks w/ generic MMU
KVM: x86/mmu: Use MMU's role to determine PTTYPE
KVM: x86/mmu: Collapse 32-bit PAE and 64-bit statements for helpers
KVM: x86/mmu: Add a helper to calculate root from role_regs
KVM: x86/mmu: Add helper to update paging metadata
KVM: x86/mmu: Don't update nested guest's paging bitmasks if CR0.PG=0
KVM: x86/mmu: Consolidate reset_rsvds_bits_mask() calls
KVM: x86/mmu: Use MMU role_regs to get LA57, and drop vCPU LA57 helper
KVM: x86/mmu: Get nested MMU's root level from the MMU's role
...
|
|
Daniel Borkmann says:
====================
pull-request: bpf-next 2021-06-28
The following pull-request contains BPF updates for your *net-next* tree.
We've added 37 non-merge commits during the last 12 day(s) which contain
a total of 56 files changed, 394 insertions(+), 380 deletions(-).
The main changes are:
1) XDP driver RCU cleanups, from Toke Høiland-Jørgensen and Paul E. McKenney.
2) Fix bpf_skb_change_proto() IPv4/v6 GSO handling, from Maciej Żenczykowski.
3) Fix false positive kmemleak report for BPF ringbuf alloc, from Rustam Kovhaev.
4) Fix x86 JIT's extable offset calculation for PROBE_LDX NULL, from Ravi Bangoria.
5) Enable libbpf fallback probing with tracing under RHEL7, from Jonathan Edwards.
6) Clean up x86 JIT to remove unused cnt tracking from EMIT macro, from Jiri Olsa.
7) Netlink cleanups for libbpf to please Coverity, from Kumar Kartikeya Dwivedi.
8) Allow to retrieve ancestor cgroup id in tracing programs, from Namhyung Kim.
9) Fix lirc BPF program query to use user-provided prog_cnt, from Sean Young.
10) Add initial libbpf doc including generated kdoc for its API, from Grant Seltzer.
11) Make xdp_rxq_info_unreg_mem_model() more robust, from Jakub Kicinski.
12) Fix up bpfilter startup log-level to info level, from Gary Lin.
====================
Signed-off-by: David S. Miller <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 updates for v5.14.
- Add MTE support in guests, complete with tag save/restore interface
- Reduce the impact of CMOs by moving them in the page-table code
- Allow device block mappings at stage-2
- Reduce the footprint of the vmemmap in protected mode
- Support the vGIC on dumb systems such as the Apple M1
- Add selftest infrastructure to support multiple configuration
and apply that to PMU/non-PMU setups
- Add selftests for the debug architecture
- The usual crop of PMU fixes
|
|
Rename "nxe" to "efer_nx" so that future macro magic can use the pattern
<reg>_<bit> for all CR0, CR4, and EFER bits that included in the role.
Using "efer_nx" also makes it clear that the role bit reflects EFER.NX,
not the NX bit in the corresponding PTE.
Signed-off-by: Sean Christopherson <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Netlink helpers I added in 8bbb77b7c7a2 ("libbpf: Add various netlink
helpers") used char * casts everywhere, and there were a few more that
existed from before.
Convert all of them to void * cast, as it is treated equivalently by
clang/gcc for the purposes of pointer arithmetic and to follow the
convention elsewhere in the kernel/libbpf.
Signed-off-by: Kumar Kartikeya Dwivedi <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Coverity complains about OOB writes to nlmsghdr. There is no OOB as we
write to the trailing buffer, but static analyzers and compilers may
rightfully be confused as the nlmsghdr pointer has subobject provenance
(and hence subobject bounds).
Fix this by using an explicit request structure containing the nlmsghdr,
struct tcmsg/ifinfomsg, and attribute buffer.
Also switch nh_tail (renamed to req_tail) to cast req * to char * so
that it can be understood as arithmetic on pointer to the representation
array (hence having same bound as request structure), which should
further appease analyzers.
As a bonus, callers don't have to pass sizeof(req) all the time now, as
size is implicitly obtained using the pointer. While at it, also reduce
the size of attribute buffer to 128 bytes (132 for ifinfomsg using
functions due to the padding).
Summary of problem:
Even though C standard allows interconvertibility of pointer to first
member and pointer to struct, for the purposes of alias analysis it
would still consider the first as having pointer value "pointer to T"
where T is type of first member hence having subobject bounds,
allowing analyzers within reason to complain when object is accessed
beyond the size of pointed to object.
The only exception to this rule may be when a char * is formed to a
member subobject. It is not possible for the compiler to be able to
tell the intent of the programmer that it is a pointer to member
object or the underlying representation array of the containing
object, so such diagnosis is suppressed.
Fixes: 715c5ce454a6 ("libbpf: Add low level TC-BPF management API")
Signed-off-by: Kumar Kartikeya Dwivedi <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
eBPF has been backported for RHEL 7 w/ kernel 3.10-940+ [0]. However only
the following program types are supported [1]:
BPF_PROG_TYPE_KPROBE
BPF_PROG_TYPE_TRACEPOINT
BPF_PROG_TYPE_PERF_EVENT
For libbpf this causes an EINVAL return during the bpf_object__probe_loading
call which only checks to see if programs of type BPF_PROG_TYPE_SOCKET_FILTER
can load.
The following will try BPF_PROG_TYPE_TRACEPOINT as a fallback attempt before
erroring out. BPF_PROG_TYPE_KPROBE was not a good candidate because on some
kernels it requires knowledge of the LINUX_VERSION_CODE.
[0] https://www.redhat.com/en/blog/introduction-ebpf-red-hat-enterprise-linux-7
[1] https://access.redhat.com/articles/3550581
Signed-off-by: Jonathan Edwards <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Trivial conflicts in net/can/isotp.c and
tools/testing/selftests/net/mptcp/mptcp_connect.sh
scaled_ppm_to_ppb() was moved from drivers/ptp/ptp_clock.c
to include/linux/ptp_clock_kernel.h in -next so re-apply
the fix there.
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
This patch is meant to start the initiative to document libbpf.
It includes .rst files which are text documentation describing building,
API naming convention, as well as an index to generated API documentation.
In this approach the generated API documentation is enabled by the kernels
existing kernel documentation system which uses sphinx. The resulting docs
would then be synced to kernel.org/doc
You can test this by running `make htmldocs` and serving the html in
Documentation/output. Since libbpf does not yet have comments in kernel
doc format, see kernel.org/doc/html/latest/doc-guide/kernel-doc.html for
an example so you can test this.
The advantage of this approach is to use the existing sphinx
infrastructure that the kernel has, and have libbpf docs in
the same place as everything else.
The current plan is to have the libbpf mirror sync the generated docs
and version them based on the libbpf releases which are cut on github.
This patch includes the addition of libbpf_api.rst which pulls comment
documentation from header files in libbpf under tools/lib/bpf/. The comment
docs would be of the standard kernel doc format.
Signed-off-by: Grant Seltzer <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Daniel Borkmann says:
====================
pull-request: bpf-next 2021-06-17
The following pull-request contains BPF updates for your *net-next* tree.
We've added 50 non-merge commits during the last 25 day(s) which contain
a total of 148 files changed, 4779 insertions(+), 1248 deletions(-).
The main changes are:
1) BPF infrastructure to migrate TCP child sockets from a listener to another
in the same reuseport group/map, from Kuniyuki Iwashima.
2) Add a provably sound, faster and more precise algorithm for tnum_mul() as
noted in https://arxiv.org/abs/2105.05398, from Harishankar Vishwanathan.
3) Streamline error reporting changes in libbpf as planned out in the
'libbpf: the road to v1.0' effort, from Andrii Nakryiko.
4) Add broadcast support to xdp_redirect_map(), from Hangbin Liu.
5) Extends bpf_map_lookup_and_delete_elem() functionality to 4 more map
types, that is, {LRU_,PERCPU_,LRU_PERCPU_,}HASH, from Denis Salopek.
6) Support new LLVM relocations in libbpf to make them more linker friendly,
also add a doc to describe the BPF backend relocations, from Yonghong Song.
7) Silence long standing KUBSAN complaints on register-based shifts in
interpreter, from Daniel Borkmann and Eric Biggers.
8) Add dummy PT_REGS macros in libbpf to fail BPF program compilation when
target arch cannot be determined, from Lorenz Bauer.
9) Extend AF_XDP to support large umems with 1M+ pages, from Magnus Karlsson.
10) Fix two minor libbpf tc BPF API issues, from Kumar Kartikeya Dwivedi.
11) Move libbpf BPF_SEQ_PRINTF/BPF_SNPRINTF macros that can be used by BPF
programs to bpf_helpers.h header, from Florent Revest.
====================
Signed-off-by: David S. Miller <[email protected]>
|
|
bpf2go is the Go equivalent of libbpf skeleton. The convention is that
the compiled BPF is checked into the repository to facilitate distributing
BPF as part of Go packages. To make this portable, bpf2go by default
generates both bpfel and bpfeb variants of the C.
Using bpf_tracing.h is inherently non-portable since the fields of
struct pt_regs differ between platforms, so CO-RE can't help us here.
The only way of working around this is to compile for each target
platform independently. bpf2go can't do this by default since there
are too many platforms.
Define the various PT_... macros when no target can be determined and
turn them into compilation failures. This works because bpf2go always
compiles for bpf targets, so the compiler fallback doesn't kick in.
Conditionally define __BPF_MISSING_TARGET so that we can inject a
more appropriate error message at build time. The user can then
choose which platform to target explicitly.
Signed-off-by: Lorenz Bauer <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
This commit introduces a new section (sk_reuseport/migrate) and sets
expected_attach_type to two each section in BPF_PROG_TYPE_SK_REUSEPORT
program.
Signed-off-by: Kuniyuki Iwashima <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Reviewed-by: Eric Dumazet <[email protected]>
Acked-by: Martin KaFai Lau <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
This got lost during the refactoring across versions. We always use
NLM_F_EXCL when creating some TC object, so reflect what the function
says and set the flag.
Fixes: 715c5ce454a6 ("libbpf: Add low level TC-BPF management API")
Signed-off-by: Kumar Kartikeya Dwivedi <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Coverity complained about this being unreachable code. It is right
because we already enforce flags to be unset, so a check validating
the flag value is redundant.
Fixes: 715c5ce454a6 ("libbpf: Add low level TC-BPF management API")
Signed-off-by: Kumar Kartikeya Dwivedi <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
There is no need for special treatment of the 'ret == 0' case.
This patch simplifies the return expression.
Signed-off-by: Wang Hai <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Acked-by: Yonghong Song <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
The printed value is ptrdiff_t and is formatted wiht %ld. This works on
64bit but produces a warning on 32bit. Fix the format specifier to %td.
Fixes: 67234743736a ("libbpf: Generate loader program out of BPF ELF file.")
Signed-off-by: Michal Suchanek <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Yonghong Song <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
When calling xsk_socket__create_shared(), the logic at line 1097 marks a
boolean flag true within the xsk_umem structure to track setup progress
in order to support multiple calls to the function. However, instead of
marking umem->tx_ring_setup_done, the code incorrectly sets
umem->rx_ring_setup_done. This leads to improper behaviour when
creating and destroying xsk and umem structures.
Multiple calls to this function is documented as supported.
Fixes: ca7a83e2487a ("libbpf: Only create rx and tx XDP rings when necessary")
Signed-off-by: Kev Jackson <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Acked-by: Yonghong Song <[email protected]>
Link: https://lore.kernel.org/bpf/YL4aU4f3Aaik7CN0@linux-dev
|
|
Light skeleton code assumes skel_internal.h header to be installed system-wide
by libbpf package. Make sure it is actually installed.
Fixes: 67234743736a ("libbpf: Generate loader program out of BPF ELF file.")
Signed-off-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
As we gradually get more headers that have to be installed, it's quite
annoying to copy/paste long $(call) commands. So extract that logic and do
a simple $(foreach) over the list of headers.
Signed-off-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Official libbpf 0.4 release doesn't include three APIs that were tentatively
put into 0.4 section. Fix libbpf.map and move these three APIs:
- bpf_map__initial_value;
- bpf_map_lookup_and_delete_elem_flags;
- bpf_object__gen_loader.
Signed-off-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
cdc-wdm: s/kill_urbs/poison_urbs/ to fix build
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
These macros are convenient wrappers around the bpf_seq_printf and
bpf_snprintf helpers. They are currently provided by bpf_tracing.h which
targets low level tracing primitives. bpf_helpers.h is a better fit.
The __bpf_narg and __bpf_apply are needed in both files and provided
twice. __bpf_empty isn't used anywhere and is removed from bpf_tracing.h
Reported-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Florent Revest <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Implement changes to error reporting for high-level libbpf APIs to make them
less surprising and less error-prone to users:
- in all the cases when error happens, errno is set to an appropriate error
value;
- in libbpf 1.0 mode, all pointer-returning APIs return NULL on error and
error code is communicated through errno; this applies both to APIs that
already returned NULL before (so now they communicate more detailed error
codes), as well as for many APIs that used ERR_PTR() macro and encoded
error numbers as fake pointers.
- in legacy (default) mode, those APIs that were returning ERR_PTR(err),
continue doing so, but still set errno.
With these changes, errno can be always used to extract actual error,
regardless of legacy or libbpf 1.0 modes. This is utilized internally in
libbpf in places where libbpf uses it's own high-level APIs.
libbpf_get_error() is adapted to handle both cases completely transparently to
end-users (and is used by libbpf consistently as well).
More context, justification, and discussion can be found in "Libbpf: the road
to v1.0" document ([0]).
[0] https://docs.google.com/document/d/1UyjTZuPFWiPFyKk1tV5an11_iaRuec6U-ZESZ54nNTY
Signed-off-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Acked-by: John Fastabend <[email protected]>
Acked-by: Toke Høiland-Jørgensen <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Ensure that low-level APIs behave uniformly across the libbpf as follows:
- in case of an error, errno is always set to the correct error code;
- when libbpf 1.0 mode is enabled with LIBBPF_STRICT_DIRECT_ERRS option to
libbpf_set_strict_mode(), return -Exxx error value directly, instead of -1;
- by default, until libbpf 1.0 is released, keep returning -1 directly.
More context, justification, and discussion can be found in "Libbpf: the road
to v1.0" document ([0]).
[0] https://docs.google.com/document/d/1UyjTZuPFWiPFyKk1tV5an11_iaRuec6U-ZESZ54nNTY
Signed-off-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Acked-by: John Fastabend <[email protected]>
Acked-by: Toke Høiland-Jørgensen <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Add libbpf_set_strict_mode() API that allows application to simulate libbpf
1.0 breaking changes before libbpf 1.0 is released. This will help users
migrate gradually and with confidence.
For now only ALL or NONE options are available, subsequent patches will add
more flags. This patch is preliminary for selftests/bpf changes.
Signed-off-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Acked-by: John Fastabend <[email protected]>
Acked-by: Toke Høiland-Jørgensen <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
LLVM patch https://reviews.llvm.org/D102712
narrowed the scope of existing R_BPF_64_64
and R_BPF_64_32 relocations, and added three
new relocations, R_BPF_64_ABS64, R_BPF_64_ABS32
and R_BPF_64_NODYLD32. The main motivation is
to make relocations linker friendly.
This change, unfortunately, breaks libbpf build,
and we will see errors like below:
libbpf: ELF relo #0 in section #6 has unexpected type 2 in
/home/yhs/work/bpf-next/tools/testing/selftests/bpf/bpf_tcp_nogpl.o
Error: failed to link
'/home/yhs/work/bpf-next/tools/testing/selftests/bpf/bpf_tcp_nogpl.o':
Unknown error -22 (-22)
The new relocation R_BPF_64_ABS64 is generated
and libbpf linker sanity check doesn't understand it.
Relocation section '.rel.struct_ops' at offset 0x1410 contains 1 entries:
Offset Info Type Symbol's Value Symbol's Name
0000000000000018 0000000700000002 R_BPF_64_ABS64 0000000000000000 nogpltcp_init
Look at the selftests/bpf/bpf_tcp_nogpl.c,
void BPF_STRUCT_OPS(nogpltcp_init, struct sock *sk)
{
}
SEC(".struct_ops")
struct tcp_congestion_ops bpf_nogpltcp = {
.init = (void *)nogpltcp_init,
.name = "bpf_nogpltcp",
};
The new llvm relocation scheme categorizes 'nogpltcp_init' reference
as R_BPF_64_ABS64 instead of R_BPF_64_64 which is used to specify
ld_imm64 relocation in the new scheme.
Let us fix the linker sanity checking by including
R_BPF_64_ABS64 and R_BPF_64_ABS32. There is no need to
check R_BPF_64_NODYLD32 which is used for .BTF and .BTF.ext.
Signed-off-by: Yonghong Song <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Acked-by: John Fastabend <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Add bpf_map_lookup_and_delete_elem_flags() libbpf API in order to use
the BPF_F_LOCK flag with the map_lookup_and_delete_elem() function.
Signed-off-by: Denis Salopek <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Acked-by: Yonghong Song <[email protected]>
Link: https://lore.kernel.org/bpf/15b05dafe46c7e0750d110f233977372029d1f62.1620763117.git.denis.salopek@sartura.hr
|
|
I'm getting the following error when running 'gen skeleton -L' as
regular user:
libbpf: Error in bpf_object__probe_loading():Operation not permitted(1).
Couldn't load trivial BPF program. Make sure your kernel supports BPF
(CONFIG_BPF_SYSCALL=y) and/or that RLIMIT_MEMLOCK is set to big enough
value.
Fixes: 67234743736a ("libbpf: Generate loader program out of BPF ELF file.")
Signed-off-by: Stanislav Fomichev <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Add BPF_PROG_RUN command as an alias to BPF_RPOG_TEST_RUN to better
indicate the full range of use cases done by the command.
Suggested-by: Daniel Borkmann <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Song Liu <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Introduce bpf_map__initial_value() to read initial contents
of mmaped data/rodata/bss maps.
Note that bpf_map__set_initial_value() doesn't allow modifying
kconfig map while bpf_map__initial_value() allows reading
its values.
Signed-off-by: Alexei Starovoitov <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Fix loader program to close temporary FDs when intermediate
sys_bpf command fails.
Signed-off-by: Alexei Starovoitov <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
The BPF program loading process performed by libbpf is quite complex
and consists of the following steps:
"open" phase:
- parse elf file and remember relocations, sections
- collect externs and ksyms including their btf_ids in prog's BTF
- patch BTF datasec (since llvm couldn't do it)
- init maps (old style map_def, BTF based, global data map, kconfig map)
- collect relocations against progs and maps
"load" phase:
- probe kernel features
- load vmlinux BTF
- resolve externs (kconfig and ksym)
- load program BTF
- init struct_ops
- create maps
- apply CO-RE relocations
- patch ld_imm64 insns with src_reg=PSEUDO_MAP, PSEUDO_MAP_VALUE, PSEUDO_BTF_ID
- reposition subprograms and adjust call insns
- sanitize and load progs
During this process libbpf does sys_bpf() calls to load BTF, create maps,
populate maps and finally load programs.
Instead of actually doing the syscalls generate a trace of what libbpf
would have done and represent it as the "loader program".
The "loader program" consists of single map with:
- union bpf_attr(s)
- BTF bytes
- map value bytes
- insns bytes
and single bpf program that passes bpf_attr(s) and data into bpf_sys_bpf() helper.
Executing such "loader program" via bpf_prog_test_run() command will
replay the sequence of syscalls that libbpf would have done which will result
the same maps created and programs loaded as specified in the elf file.
The "loader program" removes libelf and majority of libbpf dependency from
program loading process.
kconfig, typeless ksym, struct_ops and CO-RE are not supported yet.
The order of relocate_data and relocate_calls had to change, so that
bpf_gen__prog_load() can see all relocations for a given program with
correct insn_idx-es.
Signed-off-by: Alexei Starovoitov <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Prep libbpf to use FD_IDX kernel feature when generating loader program.
Signed-off-by: Alexei Starovoitov <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Add a pointer to 'struct bpf_object' to kernel_supports() helper.
It will be used in the next patch.
No functional changes.
Signed-off-by: Alexei Starovoitov <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
In order to be able to generate loader program in the later
patches change the order of data and text relocations.
Also improve the test to include data relos.
If the kernel supports "FD array" the map_fd relocations can be processed
before text relos since generated loader program won't need to manually
patch ld_imm64 insns with map_fd.
But ksym and kfunc relocations can only be processed after all calls
are relocated, since loader program will consist of a sequence
of calls to bpf_btf_find_by_name_kind() followed by patching of btf_id
and btf_obj_fd into corresponding ld_imm64 insns. The locations of those
ld_imm64 insns are specified in relocations.
Hence process all data relocations (maps, ksym, kfunc) together after call relos.
Signed-off-by: Alexei Starovoitov <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Trivial support for syscall program type.
Signed-off-by: Alexei Starovoitov <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
This adds functions that wrap the netlink API used for adding, manipulating,
and removing traffic control filters.
The API summary:
A bpf_tc_hook represents a location where a TC-BPF filter can be attached.
This means that creating a hook leads to creation of the backing qdisc,
while destruction either removes all filters attached to a hook, or destroys
qdisc if requested explicitly (as discussed below).
The TC-BPF API functions operate on this bpf_tc_hook to attach, replace,
query, and detach tc filters. All functions return 0 on success, and a
negative error code on failure.
bpf_tc_hook_create - Create a hook
Parameters:
@hook - Cannot be NULL, ifindex > 0, attach_point must be set to
proper enum constant. Note that parent must be unset when
attach_point is one of BPF_TC_INGRESS or BPF_TC_EGRESS. Note
that as an exception BPF_TC_INGRESS|BPF_TC_EGRESS is also a
valid value for attach_point.
Returns -EOPNOTSUPP when hook has attach_point as BPF_TC_CUSTOM.
bpf_tc_hook_destroy - Destroy a hook
Parameters:
@hook - Cannot be NULL. The behaviour depends on value of
attach_point. If BPF_TC_INGRESS, all filters attached to
the ingress hook will be detached. If BPF_TC_EGRESS, all
filters attached to the egress hook will be detached. If
BPF_TC_INGRESS|BPF_TC_EGRESS, the clsact qdisc will be
deleted, also detaching all filters. As before, parent must
be unset for these attach_points, and set for BPF_TC_CUSTOM.
It is advised that if the qdisc is operated on by many programs,
then the program at least check that there are no other existing
filters before deleting the clsact qdisc. An example is shown
below:
DECLARE_LIBBPF_OPTS(bpf_tc_hook, .ifindex = if_nametoindex("lo"),
.attach_point = BPF_TC_INGRESS);
/* set opts as NULL, as we're not really interested in
* getting any info for a particular filter, but just
* detecting its presence.
*/
r = bpf_tc_query(&hook, NULL);
if (r == -ENOENT) {
/* no filters */
hook.attach_point = BPF_TC_INGRESS|BPF_TC_EGREESS;
return bpf_tc_hook_destroy(&hook);
} else {
/* failed or r == 0, the latter means filters do exist */
return r;
}
Note that there is a small race between checking for no
filters and deleting the qdisc. This is currently unavoidable.
Returns -EOPNOTSUPP when hook has attach_point as BPF_TC_CUSTOM.
bpf_tc_attach - Attach a filter to a hook
Parameters:
@hook - Cannot be NULL. Represents the hook the filter will be
attached to. Requirements for ifindex and attach_point are
same as described in bpf_tc_hook_create, but BPF_TC_CUSTOM
is also supported. In that case, parent must be set to the
handle where the filter will be attached (using BPF_TC_PARENT).
E.g. to set parent to 1:16 like in tc command line, the
equivalent would be BPF_TC_PARENT(1, 16).
@opts - Cannot be NULL. The following opts are optional:
* handle - The handle of the filter
* priority - The priority of the filter
Must be >= 0 and <= UINT16_MAX
Note that when left unset, they will be auto-allocated by
the kernel. The following opts must be set:
* prog_fd - The fd of the loaded SCHED_CLS prog
The following opts must be unset:
* prog_id - The ID of the BPF prog
The following opts are optional:
* flags - Currently only BPF_TC_F_REPLACE is allowed. It
allows replacing an existing filter instead of
failing with -EEXIST.
The following opts will be filled by bpf_tc_attach on a
successful attach operation if they are unset:
* handle - The handle of the attached filter
* priority - The priority of the attached filter
* prog_id - The ID of the attached SCHED_CLS prog
This way, the user can know what the auto allocated values
for optional opts like handle and priority are for the newly
attached filter, if they were unset.
Note that some other attributes are set to fixed default
values listed below (this holds for all bpf_tc_* APIs):
protocol as ETH_P_ALL, direct action mode, chain index of 0,
and class ID of 0 (this can be set by writing to the
skb->tc_classid field from the BPF program).
bpf_tc_detach
Parameters:
@hook - Cannot be NULL. Represents the hook the filter will be
detached from. Requirements are same as described above
in bpf_tc_attach.
@opts - Cannot be NULL. The following opts must be set:
* handle, priority
The following opts must be unset:
* prog_fd, prog_id, flags
bpf_tc_query
Parameters:
@hook - Cannot be NULL. Represents the hook where the filter lookup will
be performed. Requirements are same as described above in
bpf_tc_attach().
@opts - Cannot be NULL. The following opts must be set:
* handle, priority
The following opts must be unset:
* prog_fd, prog_id, flags
The following fields will be filled by bpf_tc_query upon a
successful lookup:
* prog_id
Some usage examples (using BPF skeleton infrastructure):
BPF program (test_tc_bpf.c):
#include <linux/bpf.h>
#include <bpf/bpf_helpers.h>
SEC("classifier")
int cls(struct __sk_buff *skb)
{
return 0;
}
Userspace loader:
struct test_tc_bpf *skel = NULL;
int fd, r;
skel = test_tc_bpf__open_and_load();
if (!skel)
return -ENOMEM;
fd = bpf_program__fd(skel->progs.cls);
DECLARE_LIBBPF_OPTS(bpf_tc_hook, hook, .ifindex =
if_nametoindex("lo"), .attach_point =
BPF_TC_INGRESS);
/* Create clsact qdisc */
r = bpf_tc_hook_create(&hook);
if (r < 0)
goto end;
DECLARE_LIBBPF_OPTS(bpf_tc_opts, opts, .prog_fd = fd);
r = bpf_tc_attach(&hook, &opts);
if (r < 0)
goto end;
/* Print the auto allocated handle and priority */
printf("Handle=%u", opts.handle);
printf("Priority=%u", opts.priority);
opts.prog_fd = opts.prog_id = 0;
bpf_tc_detach(&hook, &opts);
end:
test_tc_bpf__destroy(skel);
This is equivalent to doing the following using tc command line:
# tc qdisc add dev lo clsact
# tc filter add dev lo ingress bpf obj foo.o sec classifier da
# tc filter del dev lo ingress handle <h> prio <p> bpf
... where the handle and priority can be found using:
# tc filter show dev lo ingress
Another example replacing a filter (extending prior example):
/* We can also choose both (or one), let's try replacing an
* existing filter.
*/
DECLARE_LIBBPF_OPTS(bpf_tc_opts, replace_opts, .handle =
opts.handle, .priority = opts.priority,
.prog_fd = fd);
r = bpf_tc_attach(&hook, &replace_opts);
if (r == -EEXIST) {
/* Expected, now use BPF_TC_F_REPLACE to replace it */
replace_opts.flags = BPF_TC_F_REPLACE;
return bpf_tc_attach(&hook, &replace_opts);
} else if (r < 0) {
return r;
}
/* There must be no existing filter with these
* attributes, so cleanup and return an error.
*/
replace_opts.prog_fd = replace_opts.prog_id = 0;
bpf_tc_detach(&hook, &replace_opts);
return -1;
To obtain info of a particular filter:
/* Find info for filter with handle 1 and priority 50 */
DECLARE_LIBBPF_OPTS(bpf_tc_opts, info_opts, .handle = 1,
.priority = 50);
r = bpf_tc_query(&hook, &info_opts);
if (r == -ENOENT)
printf("Filter not found");
else if (r < 0)
return r;
printf("Prog ID: %u", info_opts.prog_id);
return 0;
Signed-off-by: Kumar Kartikeya Dwivedi <[email protected]>
Co-developed-by: Daniel Borkmann <[email protected]> # libbpf API design
[ Daniel: also did major patch cleanup ]
Signed-off-by: Daniel Borkmann <[email protected]>
Reviewed-by: Toke Høiland-Jørgensen <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
This change introduces a few helpers to wrap open coded attribute
preparation in netlink.c. It also adds a libbpf_netlink_send_recv() that
is useful to wrap send + recv handling in a generic way. Subsequent patch
will also use this function for sending and receiving a netlink response.
The libbpf_nl_get_link() helper has been removed instead, moving socket
creation into the newly named libbpf_netlink_send_recv().
Every nested attribute's closure must happen using the helper
nlattr_end_nested(), which sets its length properly. NLA_F_NESTED is
enforced using nlattr_begin_nested() helper. Other simple attributes
can be added directly.
The maxsz parameter corresponds to the size of the request structure
which is being filled in, so for instance with req being:
struct {
struct nlmsghdr nh;
struct tcmsg t;
char buf[4096];
} req;
Then, maxsz should be sizeof(req).
This change also converts the open coded attribute preparation with these
helpers. Note that the only failure the internal call to nlattr_add()
could result in the nested helper would be -EMSGSIZE, hence that is what
we return to our caller.
The libbpf_netlink_send_recv() call takes care of opening the socket,
sending the netlink message, receiving the response, potentially invoking
callbacks, and return errors if any, and then finally close the socket.
This allows users to avoid identical socket setup code in different places.
The only user of libbpf_nl_get_link() has been converted to make use of it.
__bpf_set_link_xdp_fd_replace() has also been refactored to use it.
Signed-off-by: Kumar Kartikeya Dwivedi <[email protected]>
[ Daniel: major patch cleanup ]
Signed-off-by: Daniel Borkmann <[email protected]>
Reviewed-by: Toke Høiland-Jørgensen <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Detect use of static entry-point BPF programs (those with SEC() markings) and
emit error message. This is similar to
c1cccec9c636 ("libbpf: Reject static maps") but for BPF programs.
Signed-off-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Acked-by: Song Liu <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Static maps never really worked with libbpf, because all such maps were always
silently resolved to the very first map. Detect static maps (both legacy and
BTF-defined) and report user-friendly error.
Tested locally by switching few maps (legacy and BTF-defined) in selftests to
static ones and verifying that now libbpf rejects them loudly.
Signed-off-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Daniel Borkmann says:
====================
pull-request: bpf 2021-05-11
The following pull-request contains BPF updates for your *net* tree.
We've added 13 non-merge commits during the last 8 day(s) which contain
a total of 21 files changed, 817 insertions(+), 382 deletions(-).
The main changes are:
1) Fix multiple ringbuf bugs in particular to prevent writable mmap of
read-only pages, from Andrii Nakryiko & Thadeu Lima de Souza Cascardo.
2) Fix verifier alu32 known-const subregister bound tracking for bitwise
operations and/or/xor, from Daniel Borkmann.
3) Reject trampoline attachment for functions with variable arguments,
and also add a deny list of other forbidden functions, from Jiri Olsa.
4) Fix nested bpf_bprintf_prepare() calls used by various helpers by
switching to per-CPU buffers, from Florent Revest.
5) Fix kernel compilation with BTF debug info on ppc64 due to pahole
missing TCP-CC functions like cubictcp_init, from Martin KaFai Lau.
6) Add a kconfig entry to provide an option to disallow unprivileged
BPF by default, from Daniel Borkmann.
7) Fix libbpf compilation for older libelf when GELF_ST_VISIBILITY()
macro is not available, from Arnaldo Carvalho de Melo.
8) Migrate test_tc_redirect to test_progs framework as prep work
for upcoming skb_change_head() fix & selftest, from Jussi Maki.
9) Fix a libbpf segfault in add_dummy_ksym_var() if BTF is not
present, from Ian Rogers.
10) Fix tx_only micro-benchmark in xdpsock BPF sample with proper frame
size, from Magnus Karlsson.
====================
Signed-off-by: David S. Miller <[email protected]>
|
|
Do the same global -> static BTF update for global functions with STV_INTERNAL
visibility to turn on static BPF verification mode.
Signed-off-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Fix silly bug in updating ELF symbol's visibility.
Fixes: a46349227cd8 ("libbpf: Add linker extern resolution support for functions and global variables")
Signed-off-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
For better future extensibility add per-file linker options. Currently
the set of available options is empty. This changes bpf_linker__add_file()
API, but it's not a breaking change as bpf_linker APIs hasn't been released
yet.
Signed-off-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Where that macro isn't available.
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Networking fixes for 5.13-rc1, including fixes from bpf, can and
netfilter trees. Self-contained fixes, nothing risky.
Current release - new code bugs:
- dsa: ksz: fix a few bugs found by static-checker in the new driver
- stmmac: fix frame preemption handshake not triggering after
interface restart
Previous releases - regressions:
- make nla_strcmp handle more then one trailing null character
- fix stack OOB reads while fragmenting IPv4 packets in openvswitch
and net/sched
- sctp: do asoc update earlier in sctp_sf_do_dupcook_a
- sctp: delay auto_asconf init until binding the first addr
- stmmac: clear receive all(RA) bit when promiscuous mode is off
- can: mcp251x: fix resume from sleep before interface was brought up
Previous releases - always broken:
- bpf: fix leakage of uninitialized bpf stack under speculation
- bpf: fix masking negation logic upon negative dst register
- netfilter: don't assume that skb_header_pointer() will never fail
- only allow init netns to set default tcp cong to a restricted algo
- xsk: fix xp_aligned_validate_desc() when len == chunk_size to avoid
false positive errors
- ethtool: fix missing NLM_F_MULTI flag when dumping
- can: m_can: m_can_tx_work_queue(): fix tx_skb race condition
- sctp: fix a SCTP_MIB_CURRESTAB leak in sctp_sf_do_dupcook_b
- bridge: fix NULL-deref caused by a races between assigning
rx_handler_data and setting the IFF_BRIDGE_PORT bit
Latecomer:
- seg6: add counters support for SRv6 Behaviors"
* tag 'net-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (73 commits)
atm: firestream: Use fallthrough pseudo-keyword
net: stmmac: Do not enable RX FIFO overflow interrupts
mptcp: fix splat when closing unaccepted socket
i40e: Remove LLDP frame filters
i40e: Fix PHY type identifiers for 2.5G and 5G adapters
i40e: fix the restart auto-negotiation after FEC modified
i40e: Fix use-after-free in i40e_client_subtask()
i40e: fix broken XDP support
netfilter: nftables: avoid potential overflows on 32bit arches
netfilter: nftables: avoid overflows in nft_hash_buckets()
tcp: Specify cmsgbuf is user pointer for receive zerocopy.
mlxsw: spectrum_mr: Update egress RIF list before route's action
net: ipa: fix inter-EE IRQ register definitions
can: m_can: m_can_tx_work_queue(): fix tx_skb race condition
can: mcp251x: fix resume from sleep before interface was brought up
can: mcp251xfd: mcp251xfd_probe(): add missing can_rx_offload_del() in error path
can: mcp251xfd: mcp251xfd_probe(): fix an error pointer dereference in probe
netfilter: nftables: Fix a memleak from userdata error path in new objects
netfilter: remove BUG_ON() after skb_header_pointer()
netfilter: nfnetlink_osf: Fix a missing skb_header_pointer() NULL check
...
|
|
Merge yet more updates from Andrew Morton:
"This is everything else from -mm for this merge window.
90 patches.
Subsystems affected by this patch series: mm (cleanups and slub),
alpha, procfs, sysctl, misc, core-kernel, bitmap, lib, compat,
checkpatch, epoll, isofs, nilfs2, hpfs, exit, fork, kexec, gcov,
panic, delayacct, gdb, resource, selftests, async, initramfs, ipc,
drivers/char, and spelling"
* emailed patches from Andrew Morton <[email protected]>: (90 commits)
mm: fix typos in comments
mm: fix typos in comments
treewide: remove editor modelines and cruft
ipc/sem.c: spelling fix
fs: fat: fix spelling typo of values
kernel/sys.c: fix typo
kernel/up.c: fix typo
kernel/user_namespace.c: fix typos
kernel/umh.c: fix some spelling mistakes
include/linux/pgtable.h: few spelling fixes
mm/slab.c: fix spelling mistake "disired" -> "desired"
scripts/spelling.txt: add "overflw"
scripts/spelling.txt: Add "diabled" typo
scripts/spelling.txt: add "overlfow"
arm: print alloc free paths for address in registers
mm/vmalloc: remove vwrite()
mm: remove xlate_dev_kmem_ptr()
drivers/char: remove /dev/kmem for good
mm: fix some typos and code style problems
ipc/sem.c: mundane typo fixes
...
|
|
Add fast paths to find_*_bit() functions as per kernel implementation.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Yury Norov <[email protected]>
Acked-by: Rasmus Villemoes <[email protected]>
Cc: Alexey Klimov <[email protected]>
Cc: Andy Shevchenko <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Cc: David Sterba <[email protected]>
Cc: Dennis Zhou <[email protected]>
Cc: Geert Uytterhoeven <[email protected]>
Cc: Jianpeng Ma <[email protected]>
Cc: Joe Perches <[email protected]>
Cc: John Paul Adrian Glaubitz <[email protected]>
Cc: Josh Poimboeuf <[email protected]>
Cc: Rich Felker <[email protected]>
Cc: Stefano Brivio <[email protected]>
Cc: Wei Yang <[email protected]>
Cc: Wolfram Sang <[email protected]>
Cc: Yoshinori Sato <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Sync the implementation with recent kernel changes.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Yury Norov <[email protected]>
Acked-by: Rasmus Villemoes <[email protected]>
Cc: Alexey Klimov <[email protected]>
Cc: Andy Shevchenko <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Cc: David Sterba <[email protected]>
Cc: Dennis Zhou <[email protected]>
Cc: Geert Uytterhoeven <[email protected]>
Cc: Jianpeng Ma <[email protected]>
Cc: Joe Perches <[email protected]>
Cc: John Paul Adrian Glaubitz <[email protected]>
Cc: Josh Poimboeuf <[email protected]>
Cc: Rich Felker <[email protected]>
Cc: Stefano Brivio <[email protected]>
Cc: Wei Yang <[email protected]>
Cc: Wolfram Sang <[email protected]>
Cc: Yoshinori Sato <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Some functions in tools/include/linux/bitmap.h declare nbits as int. In
the kernel nbits is declared as unsigned int.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Yury Norov <[email protected]>
Acked-by: Rasmus Villemoes <[email protected]>
Cc: Alexey Klimov <[email protected]>
Cc: Andy Shevchenko <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Cc: David Sterba <[email protected]>
Cc: Dennis Zhou <[email protected]>
Cc: Geert Uytterhoeven <[email protected]>
Cc: Jianpeng Ma <[email protected]>
Cc: Joe Perches <[email protected]>
Cc: John Paul Adrian Glaubitz <[email protected]>
Cc: Josh Poimboeuf <[email protected]>
Cc: Rich Felker <[email protected]>
Cc: Stefano Brivio <[email protected]>
Cc: Wei Yang <[email protected]>
Cc: Wolfram Sang <[email protected]>
Cc: Yoshinori Sato <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|