| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Fix bug in btf_dump's logic of determining if a given struct type is
packed or not. The notion of "natural alignment" is not needed and is
even harmful in this case, so drop it altogether. The biggest difference
in btf_is_struct_packed() compared to its original implementation is
that we don't really use btf__align_of() to determine overall alignment
of a struct type (because it could be 1 for both packed and non-packed
struct, depending on specifci field definitions), and just use field's
actual alignment to calculate whether any field is requiring packing or
struct's size overall necessitates packing.
Add two simple test cases that demonstrate the difference this change
would make.
Fixes: ea2ce1ba99aa ("libbpf: Fix BTF-to-C converter's padding logic")
Reported-by: Eduard Zingerman <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Eduard Zingerman <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Turns out that btf_dump API doesn't handle a bunch of tricky corner
cases, as reported by Per, and further discovered using his testing
Python script ([0]).
This patch revamps btf_dump's padding logic significantly, making it
more correct and also avoiding unnecessary explicit padding, where
compiler would pad naturally. This overall topic turned out to be very
tricky and subtle, there are lots of subtle corner cases. The comments
in the code tries to give some clues, but comments themselves are
supposed to be paired with good understanding of C alignment and padding
rules. Plus some experimentation to figure out subtle things like
whether `long :0;` means that struct is now forced to be long-aligned
(no, it's not, turns out).
Anyways, Per's script, while not completely correct in some known
situations, doesn't show any obvious cases where this logic breaks, so
this is a nice improvement over the previous state of this logic.
Some selftests had to be adjusted to accommodate better use of natural
alignment rules, eliminating some unnecessary padding, or changing it to
`type: 0;` alignment markers.
Note also that for when we are in between bitfields, we emit explicit
bit size, while otherwise we use `: 0`, this feels much more natural in
practice.
Next patch will add few more test cases, found through randomized Per's
script.
[0] https://lore.kernel.org/bpf/[email protected]/
Reported-by: Per Sundström XP <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
btf__align_of() is supposed to be return alignment requirement of
a requested BTF type. For STRUCT/UNION it doesn't always return correct
value, because it calculates alignment only based on field types. But
for packed structs this is not enough, we need to also check field
offsets and struct size. If field offset isn't aligned according to
field type's natural alignment, then struct must be packed. Similarly,
if struct size is not a multiple of struct's natural alignment, then
struct must be packed as well.
This patch fixes this issue precisely by additionally checking these
conditions.
Fixes: 3d208f4ca111 ("libbpf: Expose btf__align_of() API")
Signed-off-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Turns out C allows to force enum to be 1-byte or 8-byte explicitly using
mode(byte) or mode(word), respecticely. Linux sources are using this in
some cases. This is imporant to handle correctly, as enum size
determines corresponding fields in a struct that use that enum type. And
if enum size is incorrect, this will lead to invalid struct layout. So
add mode(byte) and mode(word) attribute support to btf_dump APIs.
Signed-off-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
btf_dump APIs emit unnecessary tabs when emitting struct/union
definition that fits on the single line. Before this patch we'd get:
struct blah {<tab>};
This patch fixes this and makes sure that we get more natural:
struct blah {};
Fixes: 44a726c3f23c ("bpftool: Print newline before '}' for struct with padding only fields")
Signed-off-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
This is a small improvement in libbpf_strerror. When libbpf_strerror
is used to obtain the system error description, if the length of the
buf is insufficient, libbpf_sterror returns ERANGE and sets errno to
ERANGE.
However, this processing is not performed when the error code
customized by libbpf is obtained. Make some minor improvements here,
return -ERANGE and set errno to ERANGE when buf is not enough for
custom description.
Signed-off-by: Xin Liu <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
libtraceevent is now out-of-date and it is better to depend on the
system version. Remove this code that is no longer depended upon by
any builds.
Committer notes:
Removed the removed tools/lib/traceevent/ from tools/perf/MANIFEST, so
that 'make perf-tar-src-pkg' works.
Signed-off-by: Ian Rogers <[email protected]>
Acked-by: Steven Rostedt (VMware) <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Masami Hiramatsu <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Compute the headers to be installed from their source headers and make
each have its own build target to install it. Using dependencies
avoids headers being reinstalled and getting a new timestamp which
then causes files that depend on the header to be rebuilt.
Signed-off-by: Ian Rogers <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Josh Poimboeuf <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Masahiro Yamada <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Nathan Chancellor <[email protected]>
Cc: Nick Desaulniers <[email protected]>
Cc: Nicolas Schier <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: Tom Rix <[email protected]>
Cc: [email protected]
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Compute the headers to be installed from their source headers and make
each have its own build target to install it. Using dependencies
avoids headers being reinstalled and getting a new timestamp which
then causes files that depend on the header to be rebuilt.
Signed-off-by: Ian Rogers <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Josh Poimboeuf <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Masahiro Yamada <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Nathan Chancellor <[email protected]>
Cc: Nick Desaulniers <[email protected]>
Cc: Nicolas Schier <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: Tom Rix <[email protected]>
Cc: [email protected]
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Compute the headers to be installed from their source headers and make
each have its own build target to install it. Using dependencies
avoids headers being reinstalled and getting a new timestamp which
then causes files that depend on the header to be rebuilt.
Signed-off-by: Ian Rogers <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Josh Poimboeuf <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Masahiro Yamada <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Nathan Chancellor <[email protected]>
Cc: Nick Desaulniers <[email protected]>
Cc: Nicolas Schier <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: Tom Rix <[email protected]>
Cc: [email protected]
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Compute the headers to be installed from their source headers and make
each have its own build target to install it. Using dependencies
avoids headers being reinstalled and getting a new timestamp which
then causes files that depend on the header to be rebuilt.
Signed-off-by: Ian Rogers <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Josh Poimboeuf <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Masahiro Yamada <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Nathan Chancellor <[email protected]>
Cc: Nick Desaulniers <[email protected]>
Cc: Nicolas Schier <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: Tom Rix <[email protected]>
Cc: [email protected]
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Parse USDT arguments like "8@(%rsp)" on x86. These are emmited by
SystemTap. The argument syntax is similar to the existing "memory
dereference case" but the offset left out as it's zero (i.e. read
the value from the address in the register). We treat it the same
as the the "memory dereference case", but set the offset to 0.
I've tested that this fixes the "unrecognized arg #N spec: 8@(%rsp).."
error I've run into when attaching to a probe with such an argument.
Attaching and reading the correct argument values works.
Something similar might be needed for the other supported
architectures.
[0] Closes: https://github.com/libbpf/libbpf/issues/559
Signed-off-by: Timo Hunziker <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Current libbpf Makefile does not contain the help command, which
is inconvenient to use. Similar to the Makefile help command of the
perf, a help command is provided to list the commands supported by
libbpf make and the functions of the commands.
Signed-off-by: Xin Liu <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
C++ enum forward declarations are fundamentally not compatible with pure
C enum definitions, and so libbpf's use of `enum bpf_stats_type;`
forward declaration in libbpf/bpf.h public API header is causing C++
compilation issues.
More details can be found in [0], but it comes down to C++ supporting
enum forward declaration only with explicitly specified backing type:
enum bpf_stats_type: int;
In C (and I believe it's a GCC extension also), such forward declaration
is simply:
enum bpf_stats_type;
Further, in Linux UAPI this enum is defined in pure C way:
enum bpf_stats_type { BPF_STATS_RUN_TIME = 0; }
And even though in both cases backing type is int, which can be
confirmed by looking at DWARF information, for C++ compiler actual enum
definition and forward declaration are incompatible.
To eliminate this problem, for C++ mode define input argument as int,
which makes enum unnecessary in libbpf public header. This solves the
issue and as demonstrated by next patch doesn't cause any unwanted
compiler warnings, at least with default warnings setting.
[0] https://stackoverflow.com/questions/42766839/c11-enum-forward-causes-underlying-type-mismatch
[1] Closes: https://github.com/libbpf/libbpf/issues/249
Signed-off-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
tools/lib/bpf/ringbuf.c
927cbb478adf ("libbpf: Handle size overflow for ringbuf mmap")
b486d19a0ab0 ("libbpf: checkpatch: Fixed code alignments in ringbuf.c")
https://lore.kernel.org/all/[email protected]/
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Currently LLVM fails to recognize .data.* as data section and defaults to .text
section. Later BPF backend tries to emit 4-byte NOP instruction which doesn't
exist in BPF ISA and aborts.
The fix for LLVM is pending:
https://reviews.llvm.org/D138477
While waiting for the fix lets workaround the linked_list test case
by using .bss.* prefix which is properly recognized by LLVM as BSS section.
Fix libbpf to support .bss. prefix and adjust tests.
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Add libtraceevent to the name so that this install_headers build
appears different to similar targets in different libraries. Add ;
after kbuffer.h install target for consistency.
Signed-off-by: Ian Rogers <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Alexei Starovoitov <[email protected]>
Cc: Andrii Nakryiko <[email protected]>
Cc: Daniel Borkmann <[email protected]>
Cc: Hao Luo <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: John Fastabend <[email protected]>
Cc: KP Singh <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Martin KaFai Lau <[email protected]>
Cc: Masahiro Yamada <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Nicolas Schier <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Song Liu <[email protected]>
Cc: Stanislav Fomichev <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: Yonghong Song <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Add libsubcmd to the name so that this install_headers build appears
different to similar targets in different libraries.
Signed-off-by: Ian Rogers <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Alexei Starovoitov <[email protected]>
Cc: Andrii Nakryiko <[email protected]>
Cc: Daniel Borkmann <[email protected]>
Cc: Hao Luo <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: John Fastabend <[email protected]>
Cc: KP Singh <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Martin KaFai Lau <[email protected]>
Cc: Masahiro Yamada <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Nicolas Schier <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Song Liu <[email protected]>
Cc: Stanislav Fomichev <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: Yonghong Song <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Add libperf to the name so that this install_headers build appears
different to similar targets in different libraries.
Signed-off-by: Ian Rogers <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Alexei Starovoitov <[email protected]>
Cc: Andrii Nakryiko <[email protected]>
Cc: Daniel Borkmann <[email protected]>
Cc: Hao Luo <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: John Fastabend <[email protected]>
Cc: KP Singh <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Martin KaFai Lau <[email protected]>
Cc: Masahiro Yamada <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Nicolas Schier <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Song Liu <[email protected]>
Cc: Stanislav Fomichev <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: Yonghong Song <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Missing @ when building libsymbol. Make the install echo specific to
installing the libsymbol headers.
Signed-off-by: Ian Rogers <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Alexei Starovoitov <[email protected]>
Cc: Andrii Nakryiko <[email protected]>
Cc: Daniel Borkmann <[email protected]>
Cc: Hao Luo <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: John Fastabend <[email protected]>
Cc: KP Singh <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Martin KaFai Lau <[email protected]>
Cc: Masahiro Yamada <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Nicolas Schier <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Song Liu <[email protected]>
Cc: Stanislav Fomichev <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: Yonghong Song <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The perf build makes the install_headers target, however, as there is
no action for this target a warning is always produced of:
make[3]: Nothing to be done for 'install_headers'.
Solve this by adding a display of 'INSTALL libbpf_headers'.
Signed-off-by: Ian Rogers <[email protected]>
Acked-by: Andrii Nakryiko <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Alexei Starovoitov <[email protected]>
Cc: Daniel Borkmann <[email protected]>
Cc: Hao Luo <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: John Fastabend <[email protected]>
Cc: KP Singh <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Martin KaFai Lau <[email protected]>
Cc: Masahiro Yamada <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Nicolas Schier <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Song Liu <[email protected]>
Cc: Stanislav Fomichev <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: Yonghong Song <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Add missing backslash that caused an install command to always appear
in build output. Make the install headers more specific.
Signed-off-by: Ian Rogers <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Alexei Starovoitov <[email protected]>
Cc: Andrii Nakryiko <[email protected]>
Cc: Daniel Borkmann <[email protected]>
Cc: Hao Luo <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: John Fastabend <[email protected]>
Cc: KP Singh <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Martin KaFai Lau <[email protected]>
Cc: Masahiro Yamada <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Nicolas Schier <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Song Liu <[email protected]>
Cc: Stanislav Fomichev <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: Yonghong Song <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Coverity is reporting that btf_dump_name_dups() doesn't check return
result of hashmap__find() call. This is intentional, so make it explicit
with (void) cast.
Signed-off-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
The top two bits of size are used as busy and discard flags, so reject
the reservation that has any of these special bits in the size. With the
addition of validity check, these is also no need to check whether or
not total_size is overflowed.
Signed-off-by: Hou Tao <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Similar with the overflow problem on ringbuf mmap, in user_ringbuf_map()
2 * max_entries may overflow u32 when mapping writeable region.
Fixing it by casting the size of writable mmap region into a __u64 and
checking whether or not there will be overflow during mmap.
Fixes: b66ccae01f1d ("bpf: Add libbpf logic for user-space ring buffer")
Signed-off-by: Hou Tao <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
The maximum size of ringbuf is 2GB on x86-64 host, so 2 * max_entries
will overflow u32 when mapping producer page and data pages. Only
casting max_entries to size_t is not enough, because for 32-bits
application on 64-bits kernel the size of read-only mmap region
also could overflow size_t.
So fixing it by casting the size of read-only mmap region into a __u64
and checking whether or not there will be overflow during mmap.
Fixes: bf99c936f947 ("libbpf: Add BPF ring buffer support")
Signed-off-by: Hou Tao <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Using page size as max_entries when probing ring buffer map, else the
probe may fail on host with 64KB page size (e.g., an ARM64 host).
After the fix, the output of "bpftool feature" on above host will be
correct.
Before :
eBPF map_type ringbuf is NOT available
eBPF map_type user_ringbuf is NOT available
After :
eBPF map_type ringbuf is available
eBPF map_type user_ringbuf is available
Signed-off-by: Hou Tao <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
The perf/cpumap.h header is getting the 'struct perf_cpu_map' forward
declaration by luck, add it.
Acked-by: Ian Rogers <[email protected]>
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
It just hits the header guard, becoming a no-op, ditch it.
Acked-by: Ian Rogers <[email protected]>
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Add sufficient Makefile for libsymbol to be built as a dependency and
header files installed.
Signed-off-by: Ian Rogers <[email protected]>
Acked-by: Namhyung Kim <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Andrii Nakryiko <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Masahiro Yamada <[email protected]>
Cc: Nick Desaulniers <[email protected]>
Cc: Nicolas Schier <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: [email protected]
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Headers necessary for the perf build. Note, internal headers are also
installed as these are necessary for the build.
Signed-off-by: Ian Rogers <[email protected]>
Acked-by: Namhyung Kim <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Andrii Nakryiko <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Masahiro Yamada <[email protected]>
Cc: Nick Desaulniers <[email protected]>
Cc: Nicolas Schier <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: [email protected]
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Headers necessary for the perf build.
Signed-off-by: Ian Rogers <[email protected]>
Acked-by: Namhyung Kim <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Andrii Nakryiko <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Masahiro Yamada <[email protected]>
Cc: Nick Desaulniers <[email protected]>
Cc: Nicolas Schier <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: [email protected]
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
This allows libsubcmd to be installed as a dependency.
Signed-off-by: Ian Rogers <[email protected]>
Acked-by: Namhyung Kim <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Andrii Nakryiko <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Masahiro Yamada <[email protected]>
Cc: Nick Desaulniers <[email protected]>
Cc: Nicolas Schier <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: [email protected]
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
This allows libapi to be installed as a dependency.
Signed-off-by: Ian Rogers <[email protected]>
Acked-by: Namhyung Kim <[email protected]>
Cmc: Alexander Shishkin <[email protected]>
Cc: Andrii Nakryiko <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Masahiro Yamada <[email protected]>
Cc: Nick Desaulniers <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: [email protected]
Cc: nicolas schier <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
tracing_events__opendir() allows iteration over files in
<debugfs>/tracing/events but with an arbitrary sort order.
Add a scandir alternative where the results are alphabetically sorted.
Signed-off-by: Ian Rogers <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Caleb Biggers <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kajol Jain <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Perry Taylor <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Ravi Bangoria <[email protected]>
Cc: Rob Herring <[email protected]>
Cc: Sandipan Das <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: Weilin Wang <[email protected]>
Cc: Xin Gao <[email protected]>
Cc: Xing Zhengjun <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Fixed some checkpatch issues in ringbuf.c
Signed-off-by: Kang Minchul <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Acked-by: Stanislav Fomichev <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Fixed following checkpatch issues:
WARNING: Block comments use a trailing */ on a separate line
+ * other BPF program's BTF object */
WARNING: Possible repeated word: 'be'
+ * name. This is important to be be able to find corresponding BTF
ERROR: switch and case should be at the same indent
+ switch (ext->kcfg.sz) {
+ case 1: *(__u8 *)ext_val = value; break;
+ case 2: *(__u16 *)ext_val = value; break;
+ case 4: *(__u32 *)ext_val = value; break;
+ case 8: *(__u64 *)ext_val = value; break;
+ default:
ERROR: trailing statements should be on next line
+ case 1: *(__u8 *)ext_val = value; break;
ERROR: trailing statements should be on next line
+ case 2: *(__u16 *)ext_val = value; break;
ERROR: trailing statements should be on next line
+ case 4: *(__u32 *)ext_val = value; break;
ERROR: trailing statements should be on next line
+ case 8: *(__u64 *)ext_val = value; break;
ERROR: code indent should use tabs where possible
+ }$
WARNING: please, no spaces at the start of a line
+ }$
WARNING: Block comments use a trailing */ on a separate line
+ * for faster search */
ERROR: code indent should use tabs where possible
+^I^I^I^I^I^I &ext->kcfg.is_signed);$
WARNING: braces {} are not necessary for single statement blocks
+ if (err) {
+ return err;
+ }
ERROR: code indent should use tabs where possible
+^I^I^I^I sizeof(*obj->btf_modules), obj->btf_module_cnt + 1);$
Signed-off-by: Kang Minchul <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Acked-by: Stanislav Fomichev <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Fixed some checkpatch issues in btf.c
Signed-off-by: Kang Minchul <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Acked-by: Stanislav Fomichev <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
We need to pass '*link' to final libbpf_get_error,
because that one holds the return value, not 'link'.
Fixes: 4fa5bcfe07f7 ("libbpf: Allow BPF program auto-attach handlers to bail out")
Signed-off-by: Jiri Olsa <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
GCC 11.3.0 fails to compile btf_dump.c due to the following error,
which seems to originate in btf_dump_struct_data where the returned
value would be uninitialized if btf_vlen returns zero.
btf_dump.c: In function ‘btf_dump_dump_type_data’:
btf_dump.c:2363:12: error: ‘err’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
2363 | if (err < 0)
| ^
Fixes: 920d16af9b42 ("libbpf: BTF dumper support for typed data")
Signed-off-by: David Michael <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Stanislav Fomichev <[email protected]>
Acked-by: Alan Maguire <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
A fix for the LLVM compilation error while building bpftool.
Replaces the expression:
_Static_assert((p) == NULL || ...)
by expression:
_Static_assert((__builtin_constant_p((p)) ? (p) == NULL : 0) || ...)
When "p" is not a constant the former is not considered to be a
constant expression by LLVM 14.
The error was introduced in the following patch-set: [1].
The error was reported here: [2].
[1] https://lore.kernel.org/bpf/[email protected]/
[2] https://lore.kernel.org/all/[email protected]/
Reported-by: kernel test robot <[email protected]>
Fixes: c302378bc157 ("libbpf: Hashmap interface update to allow both long and void* keys/values")
Signed-off-by: Eduard Zingerman <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Acked-by: Stanislav Fomichev <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Resolve forward declarations that don't take part in type graphs
comparisons if declaration name is unambiguous. Example:
CU #1:
struct foo; // standalone forward declaration
struct foo *some_global;
CU #2:
struct foo { int x; };
struct foo *another_global;
The `struct foo` from CU #1 is not a part of any definition that is
compared against another definition while `btf_dedup_struct_types`
processes structural types. The the BTF after `btf_dedup_struct_types`
the BTF looks as follows:
[1] STRUCT 'foo' size=4 vlen=1 ...
[2] INT 'int' size=4 ...
[3] PTR '(anon)' type_id=1
[4] FWD 'foo' fwd_kind=struct
[5] PTR '(anon)' type_id=4
This commit adds a new pass `btf_dedup_resolve_fwds`, that maps such
forward declarations to structs or unions with identical name in case
if the name is not ambiguous.
The pass is positioned before `btf_dedup_ref_types` so that types
[3] and [5] could be merged as a same type after [1] and [4] are merged.
The final result for the example above looks as follows:
[1] STRUCT 'foo' size=4 vlen=1
'x' type_id=2 bits_offset=0
[2] INT 'int' size=4 bits_offset=0 nr_bits=32 encoding=SIGNED
[3] PTR '(anon)' type_id=1
For defconfig kernel with BTF enabled this removes 63 forward
declarations. Examples of removed declarations: `pt_regs`, `in6_addr`.
The running time of `btf__dedup` function is increased by about 3%.
Signed-off-by: Eduard Zingerman <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Reviewed-by: Alan Maguire <[email protected]>
Acked-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
An update for libbpf's hashmap interface from void* -> void* to a
polymorphic one, allowing both long and void* keys and values.
This simplifies many use cases in libbpf as hashmaps there are mostly
integer to integer.
Perf copies hashmap implementation from libbpf and has to be
updated as well.
Changes to libbpf, selftests/bpf and perf are packed as a single
commit to avoid compilation issues with any future bisect.
Polymorphic interface is acheived by hiding hashmap interface
functions behind auxiliary macros that take care of necessary
type casts, for example:
#define hashmap_cast_ptr(p) \
({ \
_Static_assert((p) == NULL || sizeof(*(p)) == sizeof(long),\
#p " pointee should be a long-sized integer or a pointer"); \
(long *)(p); \
})
bool hashmap_find(const struct hashmap *map, long key, long *value);
#define hashmap__find(map, key, value) \
hashmap_find((map), (long)(key), hashmap_cast_ptr(value))
- hashmap__find macro casts key and value parameters to long
and long* respectively
- hashmap_cast_ptr ensures that value pointer points to a memory
of appropriate size.
This hack was suggested by Andrii Nakryiko in [1].
This is a follow up for [2].
[1] https://lore.kernel.org/bpf/CAEf4BzZ8KFneEJxFAaNCCFPGqp20hSpS2aCj76uRk3-qZUH5xg@mail.gmail.com/
[2] https://lore.kernel.org/bpf/[email protected]/T/#m65b28f1d6d969fcd318b556db6a3ad499a42607d
Signed-off-by: Eduard Zingerman <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Changes de-duplication logic for enums in the following way:
- update btf_hash_enum to ignore size and kind fields to get
ENUM and ENUM64 types in a same hash bucket;
- update btf_compat_enum to consider enum fwd to be compatible with
full enum64 (and vice versa);
This allows BTF de-duplication in the following case:
// CU #1
enum foo;
struct s {
enum foo *a;
} *x;
// CU #2
enum foo {
x = 0xfffffffff // big enough to force enum64
};
struct s {
enum foo *a;
} *y;
De-duplicated BTF prior to this commit:
[1] ENUM64 'foo' encoding=UNSIGNED size=8 vlen=1
'x' val=68719476735ULL
[2] INT 'long unsigned int' size=8 bits_offset=0 nr_bits=64
encoding=(none)
[3] STRUCT 's' size=8 vlen=1
'a' type_id=4 bits_offset=0
[4] PTR '(anon)' type_id=1
[5] PTR '(anon)' type_id=3
[6] STRUCT 's' size=8 vlen=1
'a' type_id=8 bits_offset=0
[7] ENUM 'foo' encoding=UNSIGNED size=4 vlen=0
[8] PTR '(anon)' type_id=7
[9] PTR '(anon)' type_id=6
De-duplicated BTF after this commit:
[1] ENUM64 'foo' encoding=UNSIGNED size=8 vlen=1
'x' val=68719476735ULL
[2] INT 'long unsigned int' size=8 bits_offset=0 nr_bits=64
encoding=(none)
[3] STRUCT 's' size=8 vlen=1
'a' type_id=4 bits_offset=0
[4] PTR '(anon)' type_id=1
[5] PTR '(anon)' type_id=3
Enum forward declarations in C do not provide information about
enumeration values range. Thus the `btf_type->size` field is
meaningless for forward enum declarations. In fact, GCC does not
encode size in DWARF for forward enum declarations
(but dwarves sets enumeration size to a default value of `sizeof(int) * 8`
when size is not specified see dwarf_loader.c:die__create_new_enumeration).
Signed-off-by: Eduard Zingerman <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
bpf-next 2022-11-02
We've added 70 non-merge commits during the last 14 day(s) which contain
a total of 96 files changed, 3203 insertions(+), 640 deletions(-).
The main changes are:
1) Make cgroup local storage available to non-cgroup attached BPF programs
such as tc BPF ones, from Yonghong Song.
2) Avoid unnecessary deadlock detection and failures wrt BPF task storage
helpers, from Martin KaFai Lau.
3) Add LLVM disassembler as default library for dumping JITed code
in bpftool, from Quentin Monnet.
4) Various kprobe_multi_link fixes related to kernel modules,
from Jiri Olsa.
5) Optimize x86-64 JIT with emitting BMI2-based shift instructions,
from Jie Meng.
6) Improve BPF verifier's memory type compatibility for map key/value
arguments, from Dave Marchevsky.
7) Only create mmap-able data section maps in libbpf when data is exposed
via skeletons, from Andrii Nakryiko.
8) Add an autoattach option for bpftool to load all object assets,
from Wang Yufen.
9) Various memory handling fixes for libbpf and BPF selftests,
from Xu Kuohai.
10) Initial support for BPF selftest's vmtest.sh on arm64,
from Manu Bretelle.
11) Improve libbpf's BTF handling to dedup identical structs,
from Alan Maguire.
12) Add BPF CI and denylist documentation for BPF selftests,
from Daniel Müller.
13) Check BPF cpumap max_entries before doing allocation work,
from Florian Lehner.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (70 commits)
samples/bpf: Fix typo in README
bpf: Remove the obsolte u64_stats_fetch_*_irq() users.
bpf: check max_entries before allocating memory
bpf: Fix a typo in comment for DFS algorithm
bpftool: Fix spelling mistake "disasembler" -> "disassembler"
selftests/bpf: Fix bpftool synctypes checking failure
selftests/bpf: Panic on hard/soft lockup
docs/bpf: Add documentation for new cgroup local storage
selftests/bpf: Add test cgrp_local_storage to DENYLIST.s390x
selftests/bpf: Add selftests for new cgroup local storage
selftests/bpf: Fix test test_libbpf_str/bpf_map_type_str
bpftool: Support new cgroup local storage
libbpf: Support new cgroup local storage
bpf: Implement cgroup storage available to non-cgroup-attached bpf progs
bpf: Refactor some inode/task/sk storage functions for reuse
bpf: Make struct cgroup btf id global
selftests/bpf: Tracing prog can still do lookup under busy lock
selftests/bpf: Ensure no task storage failure for bpf_lsm.s prog due to deadlock detection
bpf: Add new bpf_task_storage_delete proto with no deadlock detection
bpf: bpf_task_storage_delete_recur does lookup first before the deadlock check
...
====================
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Add support for new cgroup local storage.
Acked-by: David Vernet <[email protected]>
Acked-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Yonghong Song <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
When examining module BTF, it is common to see core kernel structures
such as sk_buff, net_device duplicated in the module. After adding
debug messaging to BTF it turned out that much of the problem
was down to the identical struct test failing during deduplication;
sometimes the compiler adds identical structs. However
it turns out sometimes that type ids of identical struct members
can also differ, even when the containing structs are still identical.
To take an example, for struct sk_buff, debug messaging revealed
that the identical struct matching was failing for the anon
struct "headers"; specifically for the first field:
__u8 __pkt_type_offset[0]; /* 128 0 */
Looking at the code in BTF deduplication, we have code that guards
against the possibility of identical struct definitions, down to
type ids, and identical array definitions. However in this case
we have a struct which is being defined twice but does not have
identical type ids since each duplicate struct has separate type
ids for the above array member. A similar problem (though not
observed) could occur for struct-in-struct.
The solution is to make the "identical struct" test check members
not just for matching ids, but to also check if they in turn are
identical structs or arrays.
The results of doing this are quite dramatic (for some modules
at least); I see the number of type ids drop from around 10000
to just over 1000 in one module for example.
For testing use latest pahole or apply [1], otherwise dedups
can fail for the reasons described there.
Also fix return type of btf_dedup_identical_arrays() as
suggested by Andrii to match boolean return type used
elsewhere.
Fixes: efdd3eb8015e ("libbpf: Accommodate DWARF/compiler bug with duplicated structs")
Signed-off-by: Alan Maguire <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
[1] https://lore.kernel.org/bpf/1666364523-9648-1-git-send-email-alan.maguire
|
|
The reg_name in parse_usdt_arg() is used to hold register name, which
is short enough to be held in a 16-byte array, so we could define
reg_name as char reg_name[16] to avoid dynamically allocating reg_name
with sscanf.
Suggested-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Xu Kuohai <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Acked-by: Stanislav Fomichev <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
No conflicts.
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Teach libbpf to not add BPF_F_MMAPABLE flag unnecessarily for ARRAY maps
that are backing data sections, if such data sections don't expose any
variables to user-space. Exposed variables are those that have
STB_GLOBAL or STB_WEAK ELF binding and correspond to BTF VAR's
BTF_VAR_GLOBAL_ALLOCATED linkage.
The overall idea is that if some data section doesn't have any variable that
is exposed through BPF skeleton, then there is no reason to make such
BPF array mmapable. Making BPF array mmapable is not a free no-op
action, because BPF verifier doesn't allow users to put special objects
(such as BPF spin locks, RB tree nodes, linked list nodes, kptrs, etc;
anything that has a sensitive internal state that should not be modified
arbitrarily from user space) into mmapable arrays, as there is no way to
prevent user space from corrupting such sensitive state through direct
memory access through memory-mapped region.
By making sure that libbpf doesn't add BPF_F_MMAPABLE flag to BPF array
maps corresponding to data sections that only have static variables
(which are not supposed to be visible to user space according to libbpf
and BPF skeleton rules), users now can have spinlocks, kptrs, etc in
either default .bss/.data sections or custom .data.* sections (assuming
there are no global variables in such sections).
The only possible hiccup with this approach is the need to use global
variables during BPF static linking, even if it's not intended to be
shared with user space through BPF skeleton. To allow such scenarios,
extend libbpf's STV_HIDDEN ELF visibility attribute handling to
variables. Libbpf is already treating global hidden BPF subprograms as
static subprograms and adjusts BTF accordingly to make BPF verifier
verify such subprograms as static subprograms with preserving entire BPF
verifier state between subprog calls. This patch teaches libbpf to treat
global hidden variables as static ones and adjust BTF information
accordingly as well. This allows to share variables between multiple
object files during static linking, but still keep them internal to BPF
program and not get them exposed through BPF skeleton.
Note, that if the user has some advanced scenario where they absolutely
need BPF_F_MMAPABLE flag on .data/.bss/.rodata BPF array map despite
only having static variables, they still can achieve this by forcing it
through explicit bpf_map__set_map_flags() API.
Acked-by: Stanislav Fomichev <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Acked-by: Dave Marchevsky <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|