| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
If using leak sanitizer then implicitly enable reference count checking.
Signed-off-by: Ian Rogers <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Enabled when REFCNT_CHECKING is defined. The change adds a memory
allocated pointer that is interposed between the reference counted cpu
map at a get and freed by a put. The pointer replaces the original
perf_cpu_map struct, so use of the perf_cpu_map via APIs remains
unchanged. Any use of the cpu map without the API requires two versions,
handled via the RC_CHK_ACCESS macro.
This change is intended to catch:
- use after put: using a cpumap after you have put it will cause a
segv.
- unbalanced puts: two puts for a get will result in a double free
that can be captured and reported by tools like address sanitizer,
including with the associated stack traces of allocation and frees.
- missing puts: if a put is missing then the get turns into a memory
leak that can be reported by leak sanitizer, including the stack
trace at the point the get occurs.
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Alexey Bayduraev <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Andrew Morton <[email protected]>
Cc: Andy Shevchenko <[email protected]>
Cc: Darren Hart <[email protected]>
Cc: Davidlohr Bueso <[email protected]>
Cc: Dmitriy Vyukov <[email protected]>
Cc: Eric Dumazet <[email protected]>
Cc: German Gomez <[email protected]>
Cc: Hao Luo <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: James Clark <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: John Garry <[email protected]>
Cc: Kajol Jain <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Madhavan Srinivasan <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Masami Hiramatsu <[email protected]>
Cc: Miaoqian Lin <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Riccardo Mancini <[email protected]>
Cc: Shunsuke Nakamura <[email protected]>
Cc: Song Liu <[email protected]>
Cc: Stephen Brennan <[email protected]>
Cc: Steven Rostedt (VMware) <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Thomas Richter <[email protected]>,
Cc: Yury Norov <[email protected]>
Link: https://lore.kernel.org/lkml/[email protected]
[ Extracted from a larger patch ]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The macros serve as a way to debug use of a reference counted struct.
The macros add a memory allocated pointer that is interposed between
the reference counted original struct at a get and freed by a put.
The pointer replaces the original struct, so use of the struct name
via APIs remains unchanged.
Signed-off-by: Ian Rogers <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Alexey Bayduraev <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Andrew Morton <[email protected]>
Cc: Andy Shevchenko <[email protected]>
Cc: Darren Hart <[email protected]>
Cc: Davidlohr Bueso <[email protected]>
Cc: Dmitriy Vyukov <[email protected]>
Cc: Eric Dumazet <[email protected]>
Cc: German Gomez <[email protected]>
Cc: Hao Luo <[email protected]>
Cc: James Clark <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: John Garry <[email protected]>
Cc: Kajol Jain <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Madhavan Srinivasan <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Masami Hiramatsu <[email protected]>
Cc: Miaoqian Lin <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Riccardo Mancini <[email protected]>
Cc: Shunsuke Nakamura <[email protected]>
Cc: Song Liu <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: Stephen Brennan <[email protected]>
Cc: Steven Rostedt (VMware) <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Thomas Richter <[email protected]>
Cc: Yury Norov <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
To remove one more direct access to 'struct perf_cpu_map' so that we can
intercept accesses to its instantiations and refcount check it to catch
use after free, etc.
Cc: Adrian Hunter <[email protected]>
Cc: Alexey Bayduraev <[email protected]>
Cc: Dmitriy Vyukov <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Riccardo Mancini <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: Stephen Brennan <[email protected]>
Link: https://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
tools/perf to use
We'll need to reference count check 'struct perf_cpu_map', so wrap
accesses to its internal state to allow intercepting accesses to its
instances.
Cc: Adrian Hunter <[email protected]>
Cc: Alexey Bayduraev <[email protected]>
Cc: Dmitriy Vyukov <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Riccardo Mancini <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: Stephen Brennan <[email protected]>
Link: https://lore.kernel.org/
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
tools/perf to use
We had the open coded equivalent in perf_cpu_map__empty_new(), so reuse
what is in libperf.
Signed-off-by: Ian Rogers <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexey Bayduraev <[email protected]>
Cc: Dmitriy Vyukov <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Riccardo Mancini <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: Stephen Brennan <[email protected]>
Link: https://lore.kernel.org/lkml/[email protected]
[ Split from a larger patch ]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
When it uses bpf filters, event might drop some samples. It'd be nice
if it can report how many samples it lost. As LOST_SAMPLES event can
carry the similar information, let's use it for bpf filters.
To indicate it's from BPF filters, add a new misc flag for that and
do not display cpu load warnings.
Signed-off-by: Namhyung Kim <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Hao Luo <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: James Clark <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Ravi Bangoria <[email protected]>
Cc: Song Liu <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Maintaining the number of groups during event parsing is problematic
and since changing to sort/regroup events can only be computed by a
linear pass over the evlist. As the value is generally only used in
tests, rather than hold it in a variable compute it by passing over
the evlist when necessary.
This change highlights that libpfm's counting of groups with a single
entry disagreed with regular event parsing. The libpfm tests are
updated accordingly.
Signed-off-by: Ian Rogers <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Florian Fischer <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: James Clark <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: John Garry <[email protected]>
Cc: Kajol Jain <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Kim Phillips <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Ravi Bangoria <[email protected]>
Cc: Sean Christopherson <[email protected]>
Cc: Steinar H. Gunderson <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: Suzuki Poulouse <[email protected]>
Cc: Xing Zhengjun <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Setting the leader iterates the list, so rather than use idx (which
may be changed through list reordering) just count the elements and
set afterwards.
Signed-off-by: Ian Rogers <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Florian Fischer <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: James Clark <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: John Garry <[email protected]>
Cc: Kajol Jain <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Kim Phillips <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Ravi Bangoria <[email protected]>
Cc: Sean Christopherson <[email protected]>
Cc: Steinar H. Gunderson <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: Suzuki Poulouse <[email protected]>
Cc: Xing Zhengjun <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Commit 47e02b94a4c98dcc ("tools lib perf: Add dependency test to install_headers")
misses the notion of $(DESTDIR_SQ) for install_pkgconfig target, which leads to
error:
install: cannot create regular file '/usr/lib64/pkgconfig/libperf.pc': Permission denied
make: *** [Makefile:210: install_pkgconfig] Error 1
Signed-off-by: Alexander Gordeev <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Josh Poimboeuf <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Masahiro Yamada <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Nathan Chancellor <[email protected]>
Cc: Nick Desaulniers <[email protected]>
Cc: Nicolas Schier <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: Tom Rix <[email protected]>
Cc: [email protected]
Cc: [email protected]
Link: http://lore.kernel.org/lkml/Y5w/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Compute the headers to be installed from their source headers and make
each have its own build target to install it. Using dependencies
avoids headers being reinstalled and getting a new timestamp which
then causes files that depend on the header to be rebuilt.
Signed-off-by: Ian Rogers <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Josh Poimboeuf <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Masahiro Yamada <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Nathan Chancellor <[email protected]>
Cc: Nick Desaulniers <[email protected]>
Cc: Nicolas Schier <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: Tom Rix <[email protected]>
Cc: [email protected]
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Add libperf to the name so that this install_headers build appears
different to similar targets in different libraries.
Signed-off-by: Ian Rogers <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Alexei Starovoitov <[email protected]>
Cc: Andrii Nakryiko <[email protected]>
Cc: Daniel Borkmann <[email protected]>
Cc: Hao Luo <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: John Fastabend <[email protected]>
Cc: KP Singh <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Martin KaFai Lau <[email protected]>
Cc: Masahiro Yamada <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Nicolas Schier <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Song Liu <[email protected]>
Cc: Stanislav Fomichev <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: Yonghong Song <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The perf/cpumap.h header is getting the 'struct perf_cpu_map' forward
declaration by luck, add it.
Acked-by: Ian Rogers <[email protected]>
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
It just hits the header guard, becoming a no-op, ditch it.
Acked-by: Ian Rogers <[email protected]>
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Headers necessary for the perf build. Note, internal headers are also
installed as these are necessary for the build.
Signed-off-by: Ian Rogers <[email protected]>
Acked-by: Namhyung Kim <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Andrii Nakryiko <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Masahiro Yamada <[email protected]>
Cc: Nick Desaulniers <[email protected]>
Cc: Nicolas Schier <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: [email protected]
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Its just for that __packed define, so use it expanded as __attribute__((packed)),
like the other files in /usr/include do.
This was problem was preventing building the libperf examples on ALT
Linux and Fedora 35, fix it.
Reported-by: Vitaly Chikunov <[email protected]>
Acked-by: Ian Rogers <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Dmitry Levin <[email protected]
Cc: Ian Rogers <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
For system-wide evsels, the thread map should be dummy - i.e. it has a
single entry of -1. But the code guarantees such a thread map, so no
need to handle it specially.
No functional change intended.
Reviewed-by: Adrian Hunter <[email protected]>
Signed-off-by: Namhyung Kim <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The current code propagate evsel's cpu map settings to evlist when it's
added to an evlist. But the evlist->all_cpus and each evsel's cpus will
be updated in perf_evlist__set_maps() later. No need to do it before
evlist's cpus are set actually.
In fact it discards this intermediate all_cpus maps at the beginning
of perf_evlist__set_maps(). Let's not do this. It's only needed when
an evsel is added after the evlist cpu/thread maps are set.
Reviewed-by: Adrian Hunter <[email protected]>
Signed-off-by: Namhyung Kim <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Setting proper cpu and thread maps for system wide evsels regardless of
user requested cpu in __perf_evlist__propagate_maps(). Those evsels
need to be active on all cpus always. Do it in the libperf so that we
can guarantee it has proper maps.
Reviewed-by: Adrian Hunter <[email protected]>
Signed-off-by: Namhyung Kim <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Add debug messages to enable scripts to track aspects of 'perf record'
behaviour. The messages will be consumed after 'perf record' has run,
with the exception of "perf record has started" which is consequently
flushed.
Put comments so developers know which messages are also being used by test
scripts.
Signed-off-by: Adrian Hunter <[email protected]>
Acked-by: Namhyung Kim <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Jiri Olsa <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Often cpumaps encode a range of all CPUs, add a compact encoding that
doesn't require a bit mask or list of all CPUs.
Signed-off-by: Ian Rogers <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Alexey Bayduraev <[email protected]>
Cc: Athira Jajeev <[email protected]>
Cc: Colin Ian King <[email protected]>
Cc: Dave Marchevsky <[email protected]>
Cc: German Gomez <[email protected]>
Cc: Gustavo A. R. Silva <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: James Clark <[email protected]>
Cc: Kees Kook <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Riccardo Mancini <[email protected]>
Cc: Song Liu <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
It is possible for casts to introduce alignment issues, prefer a union
for perf_record_event_update.
Signed-off-by: Ian Rogers <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Alexey Bayduraev <[email protected]>
Cc: Athira Jajeev <[email protected]>
Cc: Colin Ian King <[email protected]>
Cc: Dave Marchevsky <[email protected]>
Cc: German Gomez <[email protected]>
Cc: Gustavo A. R. Silva <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: James Clark <[email protected]>
Cc: Kees Kook <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Riccardo Mancini <[email protected]>
Cc: Song Liu <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Rust symbols can become quite long due to namespacing introduced
by modules, types, traits, generics, etc. For instance,
the following code:
pub mod my_module {
pub struct MyType;
pub struct MyGenericType<T>(T);
pub trait MyTrait {
fn my_method() -> u32;
}
impl MyTrait for MyGenericType<MyType> {
fn my_method() -> u32 {
42
}
}
}
generates a symbol of length 96 when using the upcoming v0 mangling scheme:
_RNvXNtCshGpAVYOtgW1_7example9my_moduleINtB2_13MyGenericTypeNtB2_6MyTypeENtB2_7MyTrait9my_method
At the moment, Rust symbols may reach up to 300 in length.
Setting 512 as the maximum seems like a reasonable choice to
keep some headroom.
Reviewed-by: Kees Cook <[email protected]>
Reviewed-by: Petr Mladek <[email protected]>
Reviewed-by: Greg Kroah-Hartman <[email protected]>
Co-developed-by: Alex Gaynor <[email protected]>
Signed-off-by: Alex Gaynor <[email protected]>
Co-developed-by: Wedson Almeida Filho <[email protected]>
Signed-off-by: Wedson Almeida Filho <[email protected]>
Co-developed-by: Gary Guo <[email protected]>
Signed-off-by: Gary Guo <[email protected]>
Co-developed-by: Boqun Feng <[email protected]>
Signed-off-by: Boqun Feng <[email protected]>
Signed-off-by: Miguel Ojeda <[email protected]>
|
|
Originally, (refer commit f90d194a867a5a1d ("perf evlist: Do not poll
events that use the system_wide flag") there wasn't much reason to poll
system-wide events because:
1. The mmaps get "merged" via set-output anyway (the per-cpu case)
2. perf reads all mmaps when any event is woken
3. system-wide mmaps do not fill up as fast as the mmaps for user
selected events
But there was 1 reason not to poll which was that it prevented correct
termination due to POLLHUP on all user selected events. That issue is
now easily resolved by using fdarray_flag__nonfilterable.
With the advent of commit ae4f8ae16a078964 ("libperf evlist: Allow
mixing per-thread and per-cpu mmaps"), system-wide mmaps can be used
also in the per-thread case where reason 1 does not apply.
Fix the omission of system-wide events from polling by using the
fdarray_flag__nonfilterable flag.
Example:
Before:
$ perf record --no-bpf-event -vvv -e intel_pt// --per-thread uname 2>err.txt
Linux
$ grep 'sys_perf_event_open.*=\|pollfd' err.txt
sys_perf_event_open: pid 155076 cpu -1 group_fd -1 flags 0x8 = 5
sys_perf_event_open: pid 155076 cpu -1 group_fd -1 flags 0x8 = 6
sys_perf_event_open: pid -1 cpu 0 group_fd -1 flags 0x8 = 7
sys_perf_event_open: pid -1 cpu 1 group_fd -1 flags 0x8 = 9
sys_perf_event_open: pid -1 cpu 2 group_fd -1 flags 0x8 = 10
sys_perf_event_open: pid -1 cpu 3 group_fd -1 flags 0x8 = 11
sys_perf_event_open: pid -1 cpu 4 group_fd -1 flags 0x8 = 12
sys_perf_event_open: pid -1 cpu 5 group_fd -1 flags 0x8 = 13
sys_perf_event_open: pid -1 cpu 6 group_fd -1 flags 0x8 = 14
sys_perf_event_open: pid -1 cpu 7 group_fd -1 flags 0x8 = 15
thread_data[0x55fb43c29e80]: pollfd[0] <- event_fd=5
thread_data[0x55fb43c29e80]: pollfd[1] <- event_fd=6
thread_data[0x55fb43c29e80]: pollfd[2] <- non_perf_event fd=4
After:
$ perf record --no-bpf-event -vvv -e intel_pt// --per-thread uname 2>err.txt
Linux
$ grep 'sys_perf_event_open.*=\|pollfd' err.txt
sys_perf_event_open: pid 156316 cpu -1 group_fd -1 flags 0x8 = 5
sys_perf_event_open: pid 156316 cpu -1 group_fd -1 flags 0x8 = 6
sys_perf_event_open: pid -1 cpu 0 group_fd -1 flags 0x8 = 7
sys_perf_event_open: pid -1 cpu 1 group_fd -1 flags 0x8 = 9
sys_perf_event_open: pid -1 cpu 2 group_fd -1 flags 0x8 = 10
sys_perf_event_open: pid -1 cpu 3 group_fd -1 flags 0x8 = 11
sys_perf_event_open: pid -1 cpu 4 group_fd -1 flags 0x8 = 12
sys_perf_event_open: pid -1 cpu 5 group_fd -1 flags 0x8 = 13
sys_perf_event_open: pid -1 cpu 6 group_fd -1 flags 0x8 = 14
sys_perf_event_open: pid -1 cpu 7 group_fd -1 flags 0x8 = 15
thread_data[0x55cc19e58e80]: pollfd[0] <- event_fd=5
thread_data[0x55cc19e58e80]: pollfd[1] <- event_fd=6
thread_data[0x55cc19e58e80]: pollfd[2] <- event_fd=7
thread_data[0x55cc19e58e80]: pollfd[3] <- event_fd=9
thread_data[0x55cc19e58e80]: pollfd[4] <- event_fd=10
thread_data[0x55cc19e58e80]: pollfd[5] <- event_fd=11
thread_data[0x55cc19e58e80]: pollfd[6] <- event_fd=12
thread_data[0x55cc19e58e80]: pollfd[7] <- event_fd=13
thread_data[0x55cc19e58e80]: pollfd[8] <- event_fd=14
thread_data[0x55cc19e58e80]: pollfd[9] <- event_fd=15
thread_data[0x55cc19e58e80]: pollfd[10] <- non_perf_event fd=4
Fixes: ae4f8ae16a078964 ("libperf evlist: Allow mixing per-thread and per-cpu mmaps")
Signed-off-by: Adrian Hunter <[email protected]>
Acked-by: Namhyung Kim <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The offending commit removed mmap_per_thread(), which did not consider
the different set-output rules for per-thread mmaps i.e. in the per-thread
case set-output is used for file descriptors of the same thread not the
same cpu.
This was not immediately noticed because it only happens with
multi-threaded targets and we do not have a test for that yet.
Reinstate mmap_per_thread() expanding it to cover also system-wide per-cpu
events i.e. to continue to allow the mixing of per-thread and per-cpu
mmaps.
Debug messages (with -vv) show the file descriptors that are opened with
sys_perf_event_open. New debug messages are added (needs -vvv) that show
also which file descriptors are mmapped and which are redirected with
set-output.
In the per-cpu case (cpu != -1) file descriptors for the same CPU are
set-output to the first file descriptor for that CPU.
In the per-thread case (cpu == -1) file descriptors for the same thread are
set-output to the first file descriptor for that thread.
Example (process 17489 has 2 threads):
Before (but with new debug prints):
$ perf record --no-bpf-event -vvv --per-thread -p 17489
<SNIP>
sys_perf_event_open: pid 17489 cpu -1 group_fd -1 flags 0x8 = 5
sys_perf_event_open: pid 17490 cpu -1 group_fd -1 flags 0x8 = 6
<SNIP>
libperf: idx 0: mmapping fd 5
libperf: idx 0: set output fd 6 -> 5
failed to mmap with 22 (Invalid argument)
After:
$ perf record --no-bpf-event -vvv --per-thread -p 17489
<SNIP>
sys_perf_event_open: pid 17489 cpu -1 group_fd -1 flags 0x8 = 5
sys_perf_event_open: pid 17490 cpu -1 group_fd -1 flags 0x8 = 6
<SNIP>
libperf: mmap_per_thread: nr cpu values (may include -1) 1 nr threads 2
libperf: idx 0: mmapping fd 5
libperf: idx 1: mmapping fd 6
<SNIP>
[ perf record: Woken up 2 times to write data ]
[ perf record: Captured and wrote 0.018 MB perf.data (15 samples) ]
Per-cpu example (process 20341 has 2 threads, same as above):
$ perf record --no-bpf-event -vvv -p 20341
<SNIP>
sys_perf_event_open: pid 20341 cpu 0 group_fd -1 flags 0x8 = 5
sys_perf_event_open: pid 20342 cpu 0 group_fd -1 flags 0x8 = 6
sys_perf_event_open: pid 20341 cpu 1 group_fd -1 flags 0x8 = 7
sys_perf_event_open: pid 20342 cpu 1 group_fd -1 flags 0x8 = 8
sys_perf_event_open: pid 20341 cpu 2 group_fd -1 flags 0x8 = 9
sys_perf_event_open: pid 20342 cpu 2 group_fd -1 flags 0x8 = 10
sys_perf_event_open: pid 20341 cpu 3 group_fd -1 flags 0x8 = 11
sys_perf_event_open: pid 20342 cpu 3 group_fd -1 flags 0x8 = 12
sys_perf_event_open: pid 20341 cpu 4 group_fd -1 flags 0x8 = 13
sys_perf_event_open: pid 20342 cpu 4 group_fd -1 flags 0x8 = 14
sys_perf_event_open: pid 20341 cpu 5 group_fd -1 flags 0x8 = 15
sys_perf_event_open: pid 20342 cpu 5 group_fd -1 flags 0x8 = 16
sys_perf_event_open: pid 20341 cpu 6 group_fd -1 flags 0x8 = 17
sys_perf_event_open: pid 20342 cpu 6 group_fd -1 flags 0x8 = 18
sys_perf_event_open: pid 20341 cpu 7 group_fd -1 flags 0x8 = 19
sys_perf_event_open: pid 20342 cpu 7 group_fd -1 flags 0x8 = 20
<SNIP>
libperf: mmap_per_cpu: nr cpu values 8 nr threads 2
libperf: idx 0: mmapping fd 5
libperf: idx 0: set output fd 6 -> 5
libperf: idx 1: mmapping fd 7
libperf: idx 1: set output fd 8 -> 7
libperf: idx 2: mmapping fd 9
libperf: idx 2: set output fd 10 -> 9
libperf: idx 3: mmapping fd 11
libperf: idx 3: set output fd 12 -> 11
libperf: idx 4: mmapping fd 13
libperf: idx 4: set output fd 14 -> 13
libperf: idx 5: mmapping fd 15
libperf: idx 5: set output fd 16 -> 15
libperf: idx 6: mmapping fd 17
libperf: idx 6: set output fd 18 -> 17
libperf: idx 7: mmapping fd 19
libperf: idx 7: set output fd 20 -> 19
<SNIP>
[ perf record: Woken up 7 times to write data ]
[ perf record: Captured and wrote 0.020 MB perf.data (17 samples) ]
Fixes: ae4f8ae16a078964 ("libperf evlist: Allow mixing per-thread and per-cpu mmaps")
Reported-by: Tomáš Trnka <[email protected]>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=216441
Signed-off-by: Adrian Hunter <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
It checks a various combination of the read format settings and verify
it return the value in a proper position. The test uses task-clock
software events to guarantee it's always active and sets enabled/running
time.
Signed-off-by: Namhyung Kim <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The perf_counts_values should be increased to read the new lost data.
Also adjust values after read according the read format.
This supports PERF_FORMAT_GROUP which has a different data format but
it's only available for leader events. Currently it doesn't have an API
to read sibling (member) events in the group. But users may read the
sibling event directly.
Also reading from mmap would be disabled when the read format has ID or
LOST bit as it's not exposed via mmap.
Signed-off-by: Namhyung Kim <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
A mask encoding of a cpu map is laid out as:
u16 nr
u16 long_size
unsigned long mask[];
However, the mask may be 8-byte aligned meaning there is a 4-byte pad
after long_size. This means 32-bit and 64-bit builds see the mask as
being at different offsets. On top of this the structure is in the byte
data[] encoded as:
u16 type
char data[]
This means the mask's struct isn't the required 4 or 8 byte aligned, but
is offset by 2. Consequently the long reads and writes are causing
undefined behavior as the alignment is broken.
Fix the mask struct by creating explicit 32 and 64-bit variants, use a
union to avoid data[] and casts; the struct must be packed so the
layout matches the existing perf.data layout. Taking an address of a
member of a packed struct breaks alignment so pass the packed
perf_record_cpu_map_data to functions, so they can access variables with
the right alignment.
As the 64-bit version has 4 bytes of padding, optimizing writing to only
write the 32-bit version.
Committer notes:
Disable warnings about 'packed' that break the build in some arches like
riscv64, but just around that specific struct.
Signed-off-by: Ian Rogers <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Alexey Bayduraev <[email protected]>
Cc: Athira Jajeev <[email protected]>
Cc: Colin Ian King <[email protected]>
Cc: Dave Marchevsky <[email protected]>
Cc: German Gomez <[email protected]>
Cc: Gustavo A. R. Silva <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: James Clark <[email protected]>
Cc: Kees Kook <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Riccardo Mancini <[email protected]>
Cc: Song Liu <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Allows max() to be used with 'const struct perf_cpu_maps *'.
Signed-off-by: Ian Rogers <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Alexey Bayduraev <[email protected]>
Cc: Athira Jajeev <[email protected]>
Cc: Colin Ian King <[email protected]>
Cc: Dave Marchevsky <[email protected]>
Cc: German Gomez <[email protected]>
Cc: Gustavo A. R. Silva <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: James Clark <[email protected]>
Cc: Kees Kook <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Riccardo Mancini <[email protected]>
Cc: Song Liu <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Add machine_pid and vcpu to struct perf_record_auxtrace_error. The existing
fmt member is used to identify the new format.
The new members make it possible to easily differentiate errors from guest
machines.
Signed-off-by: Adrian Hunter <[email protected]>
Acked-by: Ian Rogers <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
When injecting events from a guest perf.data file, the events will have
separate sample ID numbers. These ID numbers can then be used to determine
which machine an event belongs to. To facilitate that, add machine_pid and
vcpu to id_index records. For backward compatibility, these are added at
the end of the record, and the length of the record is used to determine
if they are present or not.
Note, this is needed because the events from a guest perf.data file contain
the pid/tid of the process running at that time inside the VM not the
pid/tid of the (QEMU) hypervisor thread. So a way is needed to relate
guest events back to the guest machine and VCPU, and using sample ID
numbers for that is relatively simple and convenient.
Signed-off-by: Adrian Hunter <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
In preparation for recording sideband events in a virtual machine guest so
that they can be injected into a host perf.data file.
This is needed to enable injecting events after the initial synthesized
user events (that have an all zero id sample) but before regular events.
Committer notes:
Add entry about PERF_RECORD_FINISHED_INIT to
tools/perf/Documentation/perf.data-file-format.txt.
Committer testing:
Before:
# perf report -D | grep FINISHED
0 0x5910 [0x8]: PERF_RECORD_FINISHED_ROUND
FINISHED_ROUND events: 1 ( 0.5%)
#
After:
# perf record -- sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.020 MB perf.data (7 samples) ]
# perf report -D | grep FINISHED
0 0x5068 [0x8]: PERF_RECORD_FINISHED_INIT: unhandled!
0 0x5390 [0x8]: PERF_RECORD_FINISHED_ROUND
FINISHED_ROUND events: 1 ( 0.5%)
FINISHED_INIT events: 1 ( 0.5%)
#
Signed-off-by: Adrian Hunter <[email protected]>
Acked-by: Ian Rogers <[email protected]>
Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
If perf_event_open() fails the fd is opened but it is only freed by
closing (not by delete).
Typically when an open fails you don't call close and so this results in
a memory leak. To avoid this, add a close when open fails.
Signed-off-by: Ian Rogers <[email protected]>
Reviewed-By: Kajol Jain <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Anshuman Khandual <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Rob Herring <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
System-wide events do not have threads, so do not propagate threads to
them.
Signed-off-by: Adrian Hunter <[email protected]>
Acked-by: Ian Rogers <[email protected]>
Acked-by: Namhyung Kim <[email protected]>
Cc: Alexey Bayduraev <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Leo Yan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Currently, user_requested_cpus supplants system-wide CPUs when the evlist
has_user_cpus. Change that so that system-wide events retain their own
CPUs and they are added to all_cpus.
Signed-off-by: Adrian Hunter <[email protected]>
Acked-by: Ian Rogers <[email protected]>
Acked-by: Namhyung Kim <[email protected]>
Cc: Alexey Bayduraev <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Leo Yan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Add comments for 'system_wide' and 'requires_cpu' booleans
Signed-off-by: Adrian Hunter <[email protected]>
Acked-by: Ian Rogers <[email protected]>
Acked-by: Namhyung Kim <[email protected]>
Cc: Alexey Bayduraev <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Leo Yan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Uncore events require a CPU i.e. it cannot be -1.
The evsel system_wide flag is intended for events that should be on every
CPU, which does not make sense for uncore events because uncore events do
not map one-to-one with CPUs.
These 2 requirements are not exactly the same, so introduce a new flag
'requires_cpu' for the uncore case.
Signed-off-by: Adrian Hunter <[email protected]>
Acked-by: Ian Rogers <[email protected]>
Acked-by: Namhyung Kim <[email protected]>
Cc: Alexey Bayduraev <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Leo Yan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Print an error message if the predetermined number of mmaps is
incorrect.
Signed-off-by: Adrian Hunter <[email protected]>
Acked-by: Ian Rogers <[email protected]>
Acked-by: Namhyung Kim <[email protected]>
Cc: Alexey Bayduraev <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Leo Yan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
mmap_per_evsel() will skip events that do not match the CPU, so all CPUs
can be iterated in any case.
Signed-off-by: Adrian Hunter <[email protected]>
Acked-by: Ian Rogers <[email protected]>
Acked-by: Namhyung Kim <[email protected]>
Cc: Alexey Bayduraev <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Leo Yan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
To support collection of system-wide events with user requested CPUs,
all_cpus must be a superset of user_requested_cpus.
In order to support all_cpus to be a superset of user_requested_cpus,
all_cpus must be used instead of user_requested_cpus when dealing with CPUs
of all events instead of CPUs of requested events.
Signed-off-by: Adrian Hunter <[email protected]>
Acked-by: Ian Rogers <[email protected]>
Acked-by: Namhyung Kim <[email protected]>
Cc: Alexey Bayduraev <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Leo Yan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Add preadn() to provide pread() and readn() semantics.
Signed-off-by: Adrian Hunter <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
A variant of perf_cpu_map__for_each_cpu() that just iterates index values
without the corresponding load of the CPU.
Signed-off-by: Ian Rogers <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Alexei Starovoitov <[email protected]>
Cc: Andrii Nakryiko <[email protected]>
Cc: Daniel Borkmann <[email protected]>
Cc: Dave Marchevsky <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: James Clark <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: John Fastabend <[email protected]>
Cc: KP Singh <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Lv Ruyi <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Martin KaFai Lau <[email protected]>
Cc: Michael Petlan <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Quentin Monnet <[email protected]>
Cc: Song Liu <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: Xing Zhengjun <[email protected]>
Cc: Yonghong Song <[email protected]>
Cc: [email protected]
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Add evsel as a parameter to ->idx() in preparation for correctly
determining whether an auxtrace mmap is needed.
Signed-off-by: Adrian Hunter <[email protected]>
Acked-by: Ian Rogers <[email protected]>
Cc: Alexey Bayduraev <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Namhyung Kim <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Move ->idx() into mmap_per_evsel() in preparation for adding evsel as a
parameter.
Signed-off-by: Adrian Hunter <[email protected]>
Acked-by: Ian Rogers <[email protected]>
Cc: Alexey Bayduraev <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Namhyung Kim <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Remove ->idx() per_cpu parameter because it isn't needed.
Signed-off-by: Adrian Hunter <[email protected]>
Acked-by: Ian Rogers <[email protected]>
Cc: Alexey Bayduraev <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Namhyung Kim <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Add perf_evsel__enable_thread() as a counterpart to
perf_evsel__enable_cpu(), to enable all events for a thread.
Signed-off-by: Adrian Hunter <[email protected]>
Acked-by: Ian Rogers <[email protected]>
Cc: Alexey Bayduraev <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Namhyung Kim <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
all_cpus is merged into during propagation. Initially all_cpus is set
from PMU sysfs. perf_evlist__set_maps() will recompute it and change
evsel->cpus to user_requested_cpus if they are given.
If all_cpus isn't cleared then the union of the user_requested_cpus and
PMU sysfs values is set to all_cpus, whereas just user_requested_cpus is
necessary.
To avoid this make all_cpus empty prior to propagation.
Reviewed-by: Adrian Hunter <[email protected]>
Signed-off-by: Ian Rogers <[email protected]>
Cc: Alexander Antonov <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Alexei Starovoitov <[email protected]>
Cc: Alexey Bayduraev <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Andrii Nakryiko <[email protected]>
Cc: Daniel Borkmann <[email protected]>
Cc: German Gomez <[email protected]>
Cc: James Clark <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: John Fastabend <[email protected]>
Cc: John Garry <[email protected]>
Cc: KP Singh <[email protected]>
Cc: Kajol Jain <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Martin KaFai Lau <[email protected]>
Cc: Mathieu Poirier <[email protected]>
Cc: Mike Leach <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Riccardo Mancini <[email protected]>
Cc: Song Liu <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: Suzuki Poulouse <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: Yonghong Song <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
To pick up fixes, such as the llvm one for ubuntu:22.04.
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Factor out perf_evsel__ioctl() so it can be reused.
Signed-off-by: Adrian Hunter <[email protected]>
Cc: Alexey Bayduraev <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Namhyung Kim <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
perf_evsel::sample_id is an xyarray which can cause a segfault when
accessed beyond its size. e.g.
# perf record -e intel_pt// -C 1 sleep 1
Segmentation fault (core dumped)
#
That is happening because a dummy event is opened to capture text poke
events accross all CPUs, however the mmap logic is allocating according
to the number of user_requested_cpus.
In general, perf sometimes uses the evsel cpus to open events, and
sometimes the evlist user_requested_cpus. However, it is not necessary
to determine which case is which because the opened event file
descriptors are also in an xyarray, the size of whch can be used
to correctly allocate the size of the sample_id xyarray, because there
is one ID per file descriptor.
Note, in the affected code path, perf_evsel fd array is subsequently
used to get the file descriptor for the mmap, so it makes sense for the
xyarrays to be the same size there.
Fixes: d1a177595b3a824c ("libperf: Adopt perf_evlist__mmap()/munmap() from tools/perf")
Fixes: 246eba8e9041c477 ("perf tools: Add support for PERF_RECORD_TEXT_POKE")
Signed-off-by: Adrian Hunter <[email protected]>
Acked-by: Ian Rogers <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: [email protected] # 5.5+
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|