| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
If using leak sanitizer then implicitly enable reference count checking.
Signed-off-by: Ian Rogers <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Enabled when REFCNT_CHECKING is defined. The change adds a memory
allocated pointer that is interposed between the reference counted cpu
map at a get and freed by a put. The pointer replaces the original
perf_cpu_map struct, so use of the perf_cpu_map via APIs remains
unchanged. Any use of the cpu map without the API requires two versions,
handled via the RC_CHK_ACCESS macro.
This change is intended to catch:
- use after put: using a cpumap after you have put it will cause a
segv.
- unbalanced puts: two puts for a get will result in a double free
that can be captured and reported by tools like address sanitizer,
including with the associated stack traces of allocation and frees.
- missing puts: if a put is missing then the get turns into a memory
leak that can be reported by leak sanitizer, including the stack
trace at the point the get occurs.
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Alexey Bayduraev <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Andrew Morton <[email protected]>
Cc: Andy Shevchenko <[email protected]>
Cc: Darren Hart <[email protected]>
Cc: Davidlohr Bueso <[email protected]>
Cc: Dmitriy Vyukov <[email protected]>
Cc: Eric Dumazet <[email protected]>
Cc: German Gomez <[email protected]>
Cc: Hao Luo <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: James Clark <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: John Garry <[email protected]>
Cc: Kajol Jain <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Madhavan Srinivasan <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Masami Hiramatsu <[email protected]>
Cc: Miaoqian Lin <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Riccardo Mancini <[email protected]>
Cc: Shunsuke Nakamura <[email protected]>
Cc: Song Liu <[email protected]>
Cc: Stephen Brennan <[email protected]>
Cc: Steven Rostedt (VMware) <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Thomas Richter <[email protected]>,
Cc: Yury Norov <[email protected]>
Link: https://lore.kernel.org/lkml/[email protected]
[ Extracted from a larger patch ]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The macros serve as a way to debug use of a reference counted struct.
The macros add a memory allocated pointer that is interposed between
the reference counted original struct at a get and freed by a put.
The pointer replaces the original struct, so use of the struct name
via APIs remains unchanged.
Signed-off-by: Ian Rogers <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Alexey Bayduraev <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Andrew Morton <[email protected]>
Cc: Andy Shevchenko <[email protected]>
Cc: Darren Hart <[email protected]>
Cc: Davidlohr Bueso <[email protected]>
Cc: Dmitriy Vyukov <[email protected]>
Cc: Eric Dumazet <[email protected]>
Cc: German Gomez <[email protected]>
Cc: Hao Luo <[email protected]>
Cc: James Clark <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: John Garry <[email protected]>
Cc: Kajol Jain <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Madhavan Srinivasan <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Masami Hiramatsu <[email protected]>
Cc: Miaoqian Lin <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Riccardo Mancini <[email protected]>
Cc: Shunsuke Nakamura <[email protected]>
Cc: Song Liu <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: Stephen Brennan <[email protected]>
Cc: Steven Rostedt (VMware) <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Thomas Richter <[email protected]>
Cc: Yury Norov <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
To remove one more direct access to 'struct perf_cpu_map' so that we can
intercept accesses to its instantiations and refcount check it to catch
use after free, etc.
Cc: Adrian Hunter <[email protected]>
Cc: Alexey Bayduraev <[email protected]>
Cc: Dmitriy Vyukov <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Riccardo Mancini <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: Stephen Brennan <[email protected]>
Link: https://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
tools/perf to use
We'll need to reference count check 'struct perf_cpu_map', so wrap
accesses to its internal state to allow intercepting accesses to its
instances.
Cc: Adrian Hunter <[email protected]>
Cc: Alexey Bayduraev <[email protected]>
Cc: Dmitriy Vyukov <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Riccardo Mancini <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: Stephen Brennan <[email protected]>
Link: https://lore.kernel.org/
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
tools/perf to use
We had the open coded equivalent in perf_cpu_map__empty_new(), so reuse
what is in libperf.
Signed-off-by: Ian Rogers <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexey Bayduraev <[email protected]>
Cc: Dmitriy Vyukov <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Riccardo Mancini <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: Stephen Brennan <[email protected]>
Link: https://lore.kernel.org/lkml/[email protected]
[ Split from a larger patch ]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
When it uses bpf filters, event might drop some samples. It'd be nice
if it can report how many samples it lost. As LOST_SAMPLES event can
carry the similar information, let's use it for bpf filters.
To indicate it's from BPF filters, add a new misc flag for that and
do not display cpu load warnings.
Signed-off-by: Namhyung Kim <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Hao Luo <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: James Clark <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Ravi Bangoria <[email protected]>
Cc: Song Liu <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Maintaining the number of groups during event parsing is problematic
and since changing to sort/regroup events can only be computed by a
linear pass over the evlist. As the value is generally only used in
tests, rather than hold it in a variable compute it by passing over
the evlist when necessary.
This change highlights that libpfm's counting of groups with a single
entry disagreed with regular event parsing. The libpfm tests are
updated accordingly.
Signed-off-by: Ian Rogers <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Florian Fischer <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: James Clark <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: John Garry <[email protected]>
Cc: Kajol Jain <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Kim Phillips <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Ravi Bangoria <[email protected]>
Cc: Sean Christopherson <[email protected]>
Cc: Steinar H. Gunderson <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: Suzuki Poulouse <[email protected]>
Cc: Xing Zhengjun <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The perf/cpumap.h header is getting the 'struct perf_cpu_map' forward
declaration by luck, add it.
Acked-by: Ian Rogers <[email protected]>
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
It just hits the header guard, becoming a no-op, ditch it.
Acked-by: Ian Rogers <[email protected]>
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Its just for that __packed define, so use it expanded as __attribute__((packed)),
like the other files in /usr/include do.
This was problem was preventing building the libperf examples on ALT
Linux and Fedora 35, fix it.
Reported-by: Vitaly Chikunov <[email protected]>
Acked-by: Ian Rogers <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Dmitry Levin <[email protected]
Cc: Ian Rogers <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The current code propagate evsel's cpu map settings to evlist when it's
added to an evlist. But the evlist->all_cpus and each evsel's cpus will
be updated in perf_evlist__set_maps() later. No need to do it before
evlist's cpus are set actually.
In fact it discards this intermediate all_cpus maps at the beginning
of perf_evlist__set_maps(). Let's not do this. It's only needed when
an evsel is added after the evlist cpu/thread maps are set.
Reviewed-by: Adrian Hunter <[email protected]>
Signed-off-by: Namhyung Kim <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Often cpumaps encode a range of all CPUs, add a compact encoding that
doesn't require a bit mask or list of all CPUs.
Signed-off-by: Ian Rogers <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Alexey Bayduraev <[email protected]>
Cc: Athira Jajeev <[email protected]>
Cc: Colin Ian King <[email protected]>
Cc: Dave Marchevsky <[email protected]>
Cc: German Gomez <[email protected]>
Cc: Gustavo A. R. Silva <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: James Clark <[email protected]>
Cc: Kees Kook <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Riccardo Mancini <[email protected]>
Cc: Song Liu <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
It is possible for casts to introduce alignment issues, prefer a union
for perf_record_event_update.
Signed-off-by: Ian Rogers <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Alexey Bayduraev <[email protected]>
Cc: Athira Jajeev <[email protected]>
Cc: Colin Ian King <[email protected]>
Cc: Dave Marchevsky <[email protected]>
Cc: German Gomez <[email protected]>
Cc: Gustavo A. R. Silva <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: James Clark <[email protected]>
Cc: Kees Kook <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Riccardo Mancini <[email protected]>
Cc: Song Liu <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Rust symbols can become quite long due to namespacing introduced
by modules, types, traits, generics, etc. For instance,
the following code:
pub mod my_module {
pub struct MyType;
pub struct MyGenericType<T>(T);
pub trait MyTrait {
fn my_method() -> u32;
}
impl MyTrait for MyGenericType<MyType> {
fn my_method() -> u32 {
42
}
}
}
generates a symbol of length 96 when using the upcoming v0 mangling scheme:
_RNvXNtCshGpAVYOtgW1_7example9my_moduleINtB2_13MyGenericTypeNtB2_6MyTypeENtB2_7MyTrait9my_method
At the moment, Rust symbols may reach up to 300 in length.
Setting 512 as the maximum seems like a reasonable choice to
keep some headroom.
Reviewed-by: Kees Cook <[email protected]>
Reviewed-by: Petr Mladek <[email protected]>
Reviewed-by: Greg Kroah-Hartman <[email protected]>
Co-developed-by: Alex Gaynor <[email protected]>
Signed-off-by: Alex Gaynor <[email protected]>
Co-developed-by: Wedson Almeida Filho <[email protected]>
Signed-off-by: Wedson Almeida Filho <[email protected]>
Co-developed-by: Gary Guo <[email protected]>
Signed-off-by: Gary Guo <[email protected]>
Co-developed-by: Boqun Feng <[email protected]>
Signed-off-by: Boqun Feng <[email protected]>
Signed-off-by: Miguel Ojeda <[email protected]>
|
|
The perf_counts_values should be increased to read the new lost data.
Also adjust values after read according the read format.
This supports PERF_FORMAT_GROUP which has a different data format but
it's only available for leader events. Currently it doesn't have an API
to read sibling (member) events in the group. But users may read the
sibling event directly.
Also reading from mmap would be disabled when the read format has ID or
LOST bit as it's not exposed via mmap.
Signed-off-by: Namhyung Kim <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
A mask encoding of a cpu map is laid out as:
u16 nr
u16 long_size
unsigned long mask[];
However, the mask may be 8-byte aligned meaning there is a 4-byte pad
after long_size. This means 32-bit and 64-bit builds see the mask as
being at different offsets. On top of this the structure is in the byte
data[] encoded as:
u16 type
char data[]
This means the mask's struct isn't the required 4 or 8 byte aligned, but
is offset by 2. Consequently the long reads and writes are causing
undefined behavior as the alignment is broken.
Fix the mask struct by creating explicit 32 and 64-bit variants, use a
union to avoid data[] and casts; the struct must be packed so the
layout matches the existing perf.data layout. Taking an address of a
member of a packed struct breaks alignment so pass the packed
perf_record_cpu_map_data to functions, so they can access variables with
the right alignment.
As the 64-bit version has 4 bytes of padding, optimizing writing to only
write the 32-bit version.
Committer notes:
Disable warnings about 'packed' that break the build in some arches like
riscv64, but just around that specific struct.
Signed-off-by: Ian Rogers <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Alexey Bayduraev <[email protected]>
Cc: Athira Jajeev <[email protected]>
Cc: Colin Ian King <[email protected]>
Cc: Dave Marchevsky <[email protected]>
Cc: German Gomez <[email protected]>
Cc: Gustavo A. R. Silva <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: James Clark <[email protected]>
Cc: Kees Kook <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Riccardo Mancini <[email protected]>
Cc: Song Liu <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Allows max() to be used with 'const struct perf_cpu_maps *'.
Signed-off-by: Ian Rogers <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Alexey Bayduraev <[email protected]>
Cc: Athira Jajeev <[email protected]>
Cc: Colin Ian King <[email protected]>
Cc: Dave Marchevsky <[email protected]>
Cc: German Gomez <[email protected]>
Cc: Gustavo A. R. Silva <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: James Clark <[email protected]>
Cc: Kees Kook <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Riccardo Mancini <[email protected]>
Cc: Song Liu <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Add machine_pid and vcpu to struct perf_record_auxtrace_error. The existing
fmt member is used to identify the new format.
The new members make it possible to easily differentiate errors from guest
machines.
Signed-off-by: Adrian Hunter <[email protected]>
Acked-by: Ian Rogers <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
When injecting events from a guest perf.data file, the events will have
separate sample ID numbers. These ID numbers can then be used to determine
which machine an event belongs to. To facilitate that, add machine_pid and
vcpu to id_index records. For backward compatibility, these are added at
the end of the record, and the length of the record is used to determine
if they are present or not.
Note, this is needed because the events from a guest perf.data file contain
the pid/tid of the process running at that time inside the VM not the
pid/tid of the (QEMU) hypervisor thread. So a way is needed to relate
guest events back to the guest machine and VCPU, and using sample ID
numbers for that is relatively simple and convenient.
Signed-off-by: Adrian Hunter <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
In preparation for recording sideband events in a virtual machine guest so
that they can be injected into a host perf.data file.
This is needed to enable injecting events after the initial synthesized
user events (that have an all zero id sample) but before regular events.
Committer notes:
Add entry about PERF_RECORD_FINISHED_INIT to
tools/perf/Documentation/perf.data-file-format.txt.
Committer testing:
Before:
# perf report -D | grep FINISHED
0 0x5910 [0x8]: PERF_RECORD_FINISHED_ROUND
FINISHED_ROUND events: 1 ( 0.5%)
#
After:
# perf record -- sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.020 MB perf.data (7 samples) ]
# perf report -D | grep FINISHED
0 0x5068 [0x8]: PERF_RECORD_FINISHED_INIT: unhandled!
0 0x5390 [0x8]: PERF_RECORD_FINISHED_ROUND
FINISHED_ROUND events: 1 ( 0.5%)
FINISHED_INIT events: 1 ( 0.5%)
#
Signed-off-by: Adrian Hunter <[email protected]>
Acked-by: Ian Rogers <[email protected]>
Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Add comments for 'system_wide' and 'requires_cpu' booleans
Signed-off-by: Adrian Hunter <[email protected]>
Acked-by: Ian Rogers <[email protected]>
Acked-by: Namhyung Kim <[email protected]>
Cc: Alexey Bayduraev <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Leo Yan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Uncore events require a CPU i.e. it cannot be -1.
The evsel system_wide flag is intended for events that should be on every
CPU, which does not make sense for uncore events because uncore events do
not map one-to-one with CPUs.
These 2 requirements are not exactly the same, so introduce a new flag
'requires_cpu' for the uncore case.
Signed-off-by: Adrian Hunter <[email protected]>
Acked-by: Ian Rogers <[email protected]>
Acked-by: Namhyung Kim <[email protected]>
Cc: Alexey Bayduraev <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Leo Yan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Add preadn() to provide pread() and readn() semantics.
Signed-off-by: Adrian Hunter <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
A variant of perf_cpu_map__for_each_cpu() that just iterates index values
without the corresponding load of the CPU.
Signed-off-by: Ian Rogers <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Alexei Starovoitov <[email protected]>
Cc: Andrii Nakryiko <[email protected]>
Cc: Daniel Borkmann <[email protected]>
Cc: Dave Marchevsky <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: James Clark <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: John Fastabend <[email protected]>
Cc: KP Singh <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Lv Ruyi <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Martin KaFai Lau <[email protected]>
Cc: Michael Petlan <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Quentin Monnet <[email protected]>
Cc: Song Liu <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: Xing Zhengjun <[email protected]>
Cc: Yonghong Song <[email protected]>
Cc: [email protected]
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Add evsel as a parameter to ->idx() in preparation for correctly
determining whether an auxtrace mmap is needed.
Signed-off-by: Adrian Hunter <[email protected]>
Acked-by: Ian Rogers <[email protected]>
Cc: Alexey Bayduraev <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Namhyung Kim <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Remove ->idx() per_cpu parameter because it isn't needed.
Signed-off-by: Adrian Hunter <[email protected]>
Acked-by: Ian Rogers <[email protected]>
Cc: Alexey Bayduraev <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Namhyung Kim <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Add perf_evsel__enable_thread() as a counterpart to
perf_evsel__enable_cpu(), to enable all events for a thread.
Signed-off-by: Adrian Hunter <[email protected]>
Acked-by: Ian Rogers <[email protected]>
Cc: Alexey Bayduraev <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Namhyung Kim <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Returns true if the second argument is a subset of the first.
Signed-off-by: Ian Rogers <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Antonov <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Alexei Starovoitov <[email protected]>
Cc: Alexey Bayduraev <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Andrii Nakryiko <[email protected]>
Cc: Daniel Borkmann <[email protected]>
Cc: German Gomez <[email protected]>
Cc: James Clark <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: John Fastabend <[email protected]>
Cc: John Garry <[email protected]>
Cc: KP Singh <[email protected]>
Cc: Kajol Jain <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Martin KaFai Lau <[email protected]>
Cc: Mathieu Poirier <[email protected]>
Cc: Mike Leach <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Riccardo Mancini <[email protected]>
Cc: Song Liu <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: Suzuki Poulouse <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: Yonghong Song <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
evlist contains cpus and all_cpus. all_cpus is the union of the cpu maps
of all evsels.
For non-task targets, cpus is set to be cpus requested from the command
line, defaulting to all online cpus if no cpus are specified.
For an uncore event, all_cpus may be just CPU 0 or every online CPU.
This causes all_cpus to have fewer values than the cpus variable which
is confusing given the 'all' in the name.
To try to make the behavior clearer, rename cpus to user_requested_cpus
and add comments on the two struct variables.
Signed-off-by: Ian Rogers <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Antonov <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Alexei Starovoitov <[email protected]>
Cc: Alexey Bayduraev <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Andrii Nakryiko <[email protected]>
Cc: Daniel Borkmann <[email protected]>
Cc: German Gomez <[email protected]>
Cc: James Clark <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: John Fastabend <[email protected]>
Cc: John Garry <[email protected]>
Cc: KP Singh <[email protected]>
Cc: Kajol Jain <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Martin KaFai Lau <[email protected]>
Cc: Mathieu Poirier <[email protected]>
Cc: Mike Leach <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Riccardo Mancini <[email protected]>
Cc: Song Liu <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: Suzuki Poulouse <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: Yonghong Song <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tools updates from Arnaldo Carvalho de Melo:
"New features:
perf ftrace:
- Add -n/--use-nsec option to the 'latency' subcommand.
Default: usecs:
$ sudo perf ftrace latency -T dput -a sleep 1
# DURATION | COUNT | GRAPH |
0 - 1 us | 2098375 | ############################# |
1 - 2 us | 61 | |
2 - 4 us | 33 | |
4 - 8 us | 13 | |
8 - 16 us | 124 | |
16 - 32 us | 123 | |
32 - 64 us | 1 | |
64 - 128 us | 0 | |
128 - 256 us | 1 | |
256 - 512 us | 0 | |
Better granularity with nsec:
$ sudo perf ftrace latency -T dput -a -n sleep 1
# DURATION | COUNT | GRAPH |
0 - 1 us | 0 | |
1 - 2 ns | 0 | |
2 - 4 ns | 0 | |
4 - 8 ns | 0 | |
8 - 16 ns | 0 | |
16 - 32 ns | 0 | |
32 - 64 ns | 0 | |
64 - 128 ns | 1163434 | ############## |
128 - 256 ns | 914102 | ############# |
256 - 512 ns | 884 | |
512 - 1024 ns | 613 | |
1 - 2 us | 31 | |
2 - 4 us | 17 | |
4 - 8 us | 7 | |
8 - 16 us | 123 | |
16 - 32 us | 83 | |
perf lock:
- Add -c/--combine-locks option to merge lock instances in the same
class into a single entry.
# perf lock report -c
Name acquired contended avg wait(ns) total wait(ns) max wait(ns) min wait(ns)
rcu_read_lock 251225 0 0 0 0 0
hrtimer_bases.lock 39450 0 0 0 0 0
&sb->s_type->i_l... 10301 1 662 662 662 662
ptlock_ptr(page) 10173 2 701 1402 760 642
&(ei->i_block_re... 8732 0 0 0 0 0
&xa->xa_lock 8088 0 0 0 0 0
&base->lock 6705 0 0 0 0 0
&p->pi_lock 5549 0 0 0 0 0
&dentry->d_lockr... 5010 4 1274 5097 1844 789
&ep->lock 3958 0 0 0 0 0
- Add -F/--field option to customize the list of fields to output:
$ perf lock report -F contended,wait_max -k avg_wait
Name contended max wait(ns) avg wait(ns)
slock-AF_INET6 1 23543 23543
&lruvec->lru_lock 5 18317 11254
slock-AF_INET6 1 10379 10379
rcu_node_1 1 2104 2104
&dentry->d_lockr... 1 1844 1844
&dentry->d_lockr... 1 1672 1672
&newf->file_lock 15 2279 1025
&dentry->d_lockr... 1 792 792
- Add --synth=no option for record, as there is no need to symbolize,
lock names comes from the tracepoints.
perf record:
- Threaded recording, opt-in, via the new --threads command line
option.
- Improve AMD IBS (Instruction-Based Sampling) error handling
messages.
perf script:
- Add 'brstackinsnlen' field (use it with -F) for branch stacks.
- Output branch sample type in 'perf script'.
perf report:
- Add "addr_from" and "addr_to" sort dimensions.
- Print branch stack entry type in 'perf report --dump-raw-trace'
- Fix symbolization for chrooted workloads.
Hardware tracing:
Intel PT:
- Add CFE (Control Flow Event) and EVD (Event Data) packets support.
- Add MODE.Exec IFLAG bit support.
Explanation about these features from the "Intel® 64 and IA-32
architectures software developer’s manual combined volumes: 1, 2A,
2B, 2C, 2D, 3A, 3B, 3C, 3D, and 4" PDF at:
https://cdrdv2.intel.com/v1/dl/getContent/671200
At page 3951:
"32.2.4
Event Trace is a capability that exposes details about the
asynchronous events, when they are generated, and when their
corresponding software event handler completes execution. These
include:
o Interrupts, including NMI and SMI, including the interrupt
vector when defined.
o Faults, exceptions including the fault vector.
- Page faults additionally include the page fault address,
when in context.
o Event handler returns, including IRET and RSM.
o VM exits and VM entries.¹
- VM exits include the values written to the “exit reason”
and “exit qualification” VMCS fields. INIT and SIPI events.
o TSX aborts, including the abort status returned for the RTM
instructions.
o Shutdown.
Additionally, it provides indication of the status of the
Interrupt Flag (IF), to indicate when interrupts are masked"
ARM CoreSight:
- Use advertised caps/min_interval as default sample_period on ARM
spe.
- Update deduction of TRCCONFIGR register for branch broadcast on
ARM's CoreSight ETM.
Vendor Events (JSON):
Intel:
- Update events and metrics for: Alderlake, Broadwell, Broadwell DE,
BroadwellX, CascadelakeX, Elkhartlake, Bonnell, Goldmont,
GoldmontPlus, Westmere EP-DP, Haswell, HaswellX, Icelake, IcelakeX,
Ivybridge, Ivytown, Jaketown, Knights Landing, Nehalem EP,
Sandybridge, Silvermont, Skylake, Skylake Server, SkylakeX,
Tigerlake, TremontX, Westmere EP-SP, and Westmere EX.
ARM:
- Add support for HiSilicon CPA PMU aliasing.
perf stat:
- Fix forked applications enablement of counters.
- The 'slots' should only be printed on a different order than the
one specified on the command line when 'topdown' events are
present, fix it.
Miscellaneous:
- Sync msr-index, cpufeatures header files with the kernel sources.
- Stop using some deprecated libbpf APIs in 'perf trace'.
- Fix some spelling mistakes.
- Refactor the maps pointers usage to pave the way for using refcount
debugging.
- Only offer the --tui option on perf top, report and annotate when
perf was built with libslang.
- Don't mention --to-ctf in 'perf data --help' when not linking with
the required library, libbabeltrace.
- Use ARRAY_SIZE() instead of ad hoc equivalent, spotted by
array_size.cocci.
- Enhance the matching of sub-commands abbreviations:
'perf c2c rec' -> 'perf c2c record'
'perf c2c recport -> error
- Set build-id using build-id header on new mmap records.
- Fix generation of 'perf --version' string.
perf test:
- Add test for the arm_spe event.
- Add test to check unwinding using fame-pointer (fp) mode on arm64.
- Make metric testing more robust in 'perf test'.
- Add error message for unsupported branch stack cases.
libperf:
- Add API for allocating new thread map array.
- Fix typo in perf_evlist__open() failure error messages in libperf
tests.
perf c2c:
- Replace bitmap_weight() with bitmap_empty() where appropriate"
* tag 'perf-tools-for-v5.18-2022-03-26' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (143 commits)
perf evsel: Improve AMD IBS (Instruction-Based Sampling) error handling messages
perf python: Add perf_env stubs that will be needed in evsel__open_strerror()
perf tools: Enhance the matching of sub-commands abbreviations
libperf tests: Fix typo in perf_evlist__open() failure error messages
tools arm64: Import cputype.h
perf lock: Add -F/--field option to control output
perf lock: Extend struct lock_key to have print function
perf lock: Add --synth=no option for record
tools headers cpufeatures: Sync with the kernel sources
tools headers cpufeatures: Sync with the kernel sources
perf stat: Fix forked applications enablement of counters
tools arch x86: Sync the msr-index.h copy with the kernel sources
perf evsel: Make evsel__env() always return a valid env
perf build-id: Fix spelling mistake "Cant" -> "Can't"
perf header: Fix spelling mistake "could't" -> "couldn't"
perf script: Add 'brstackinsnlen' for branch stacks
perf parse-events: Move slots only with topdown
perf ftrace latency: Update documentation
perf ftrace latency: Add -n/--use-nsec option
perf tools: Fix version kernel tag
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux
Pull flexible-array transformations from Gustavo Silva:
"Treewide patch that replaces zero-length arrays with flexible-array
members.
This has been baking in linux-next for a whole development cycle"
* tag 'flexible-array-transformations-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux:
treewide: Replace zero-length arrays with flexible-array members
|
|
The existing API perf_thread_map__new_dummy() allocates new thread map
for one thread. I couldn't find a way to reallocate the map with more
threads, or to allocate a new map for more than one thread.
Having multiple threads in a thread map is essential for some use cases.
That's why a new API is proposed, which allocates a new thread map for
given number of threads: perf_thread_map__new_array()
Signed-off-by: Tzvetomir Stoyanov (VMware) <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Cc: Ian Rogers <[email protected]>
Link: https://lore.kernel.org/linux-perf-users/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The "int thread" input arguments of some perf_thead_map APIs are index
of the thread in the thread map.
In order to avoid confusion and to make the APIs consistent with
perf_cpu_map APIs, those arguments are renamed to "int idx".
Suggested-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Tzvetomir Stoyanov (VMware) <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Cc: Ian Rogers <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
There is a regular need in the kernel to provide a way to declare
having a dynamically sized set of trailing elements in a structure.
Kernel code should always use “flexible array members”[1] for these
cases. The older style of one-element or zero-length arrays should
no longer be used[2].
This code was transformed with the help of Coccinelle:
(next-20220214$ spatch --jobs $(getconf _NPROCESSORS_ONLN) --sp-file script.cocci --include-headers --dir . > output.patch)
@@
identifier S, member, array;
type T1, T2;
@@
struct S {
...
T1 member;
T2 array[
- 0
];
};
UAPI and wireless changes were intentionally excluded from this patch
and will be sent out separately.
[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://www.kernel.org/doc/html/v5.16/process/deprecated.html#zero-length-and-one-element-arrays
Link: https://github.com/KSPP/linux/issues/78
Reviewed-by: Kees Cook <[email protected]>
Signed-off-by: Gustavo A. R. Silva <[email protected]>
|
|
Tzvetomir Stoyanov reported an issue with using macro
perf_cpu_map__for_each_cpu using private perf_cpu object.
The issue is caused by recent change that wrapped cpu in struct perf_cpu
to distinguish it from cpu indexes. We need to make struct perf_cpu
public.
Add a simple test for using the perf_cpu_map__for_each_cpu macro.
Fixes: 6d18804b963b78dc ("perf cpumap: Give CPUs their own type")
Reported-by: Tzvetomir Stoyanov (VMware) <[email protected]>
Signed-off-by: Jiri Olsa <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
A common problem is confusing CPU map indices with the CPU, by wrapping
the CPU with a struct then this is avoided. This approach is similar to
atomic_t.
Committer notes:
To make it build with BUILD_BPF_SKEL=1 these files needed the
conversions to 'struct perf_cpu' usage:
tools/perf/util/bpf_counter.c
tools/perf/util/bpf_counter_cgroup.c
tools/perf/util/bpf_ftrace.c
Also perf_env__get_cpu() was removed back in "perf cpumap: Switch
cpu_map__build_map to cpu function".
Additionally these needed to be fixed for the ARM builds to complete:
tools/perf/arch/arm/util/cs-etm.c
tools/perf/arch/arm64/util/pmu.c
Suggested-by: John Garry <[email protected]>
Signed-off-by: Ian Rogers <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: James Clark <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kajol Jain <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Mathieu Poirier <[email protected]>
Cc: Mike Leach <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Paul Clarke <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Riccardo Mancini <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: Suzuki Poulouse <[email protected]>
Cc: Vineet Singh <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Modify variable names and adopt perf_cpu_map__for_each_cpu() in
perf_evsel__open().
Renaming is done by looking for consistency in API usage.
Signed-off-by: Ian Rogers <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: James Clark <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: John Garry <[email protected]>
Cc: Kajol Jain <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Mathieu Poirier <[email protected]>
Cc: Mike Leach <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Paul Clarke <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Riccardo Mancini <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: Suzuki Poulouse <[email protected]>
Cc: Vineet Singh <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Make the cpu map argument const for consistency with the rest of the
API. Modify cpu_map__idx accordingly.
Reviewed-by: James Clark <[email protected]>
Signed-off-by: Ian Rogers <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: John Garry <[email protected]>
Cc: Kajol Jain <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Mathieu Poirier <[email protected]>
Cc: Mike Leach <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Paul Clarke <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Riccardo Mancini <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: Suzuki Poulouse <[email protected]>
Cc: Vineet Singh <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
A particular observed problem is confusing the index with the CPU value,
documentation should hopefully reduce this type of problem.
Reviewed-by: James Clark <[email protected]>
Reviewed-by: John Garry <[email protected]>
Signed-off-by: Ian Rogers <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kajol Jain <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Mathieu Poirier <[email protected]>
Cc: Mike Leach <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Paul Clarke <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Riccardo Mancini <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: Suzuki Poulouse <[email protected]>
Cc: Vineet Singh <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The leader of a group is the first, but allow it to be an arbitrary list
member so that for Intel topdown events slots may always be the group
leader.
Reviewed-by: Kajol Jain <[email protected]>
Signed-off-by: Ian Rogers <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: John Garry <[email protected]>
Cc: Kajol Jain <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Paul Clarke <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Riccardo Mancini <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: Vineet Singh <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Move perf_counts_values__scale() from tools/perf/util to tools/lib/perf
so that it can be used with libperf.
Committer notes:
As noted by Jiri, use __s8 instead of s8 on the exported function.
Signed-off-by: Shunsuke Nakamura <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Rob Herring <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The PERF_RECORD_AUX_OUTPUT_HW_ID event provides a way to match AUX output
data like Intel PT PEBS-via-PT back to the event that it came from, by
providing a hardware ID that is present in the AUX output.
Reviewed-by: Alexander Shishkin <[email protected]>
Reviewed-by: Andi Kleen <[email protected]>
Signed-off-by: Adrian Hunter <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: [email protected]
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
libperf's verbose printing checks the -v option every time the macro _T_ START
is called.
Since there are currently four libperf tests registered, the macro _T_ START is
called four times, but verbose printing after the second time is not output.
Resets the index of the element processed by getopt() and fix verbose printing
so that it prints in all tests.
Signed-off-by: Shunsuke Nakamura <[email protected]>
Acked-by: Rob Herring <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
libperf already has a static function called 'cpu_map__default_new()'.
Add a new API perf_cpu_map__default_new() to export the function.
Signed-off-by: Jin Yao <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jin Yao <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https //lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Move the implementation of evlist__set_leader() to a new libperf
perf_evlist__set_leader() function with the same functionality make it a
libperf exported API.
Signed-off-by: Jiri Olsa <[email protected]>
Requested-by: Shunsuke Nakamura <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Michael Petlan <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Move evsel::nr_groups to perf_evsel::nr_groups, so we can move the group
interface to libperf.
Signed-off-by: Jiri Olsa <[email protected]>
Requested-by: Shunsuke Nakamura <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Michael Petlan <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Move evsel::leader to perf_evsel::leader, so we can move the group
interface to libperf.
Also add several evsel helpers to ease up the transition:
struct evsel *evsel__leader(struct evsel *evsel);
- get leader evsel
bool evsel__has_leader(struct evsel *evsel, struct evsel *leader);
- true if evsel has leader as leader
bool evsel__is_leader(struct evsel *evsel);
- true if evsel is itw own leader
void evsel__set_leader(struct evsel *evsel, struct evsel *leader);
- set leader for evsel
Committer notes:
Fix this when building with 'make BUILD_BPF_SKEL=1'
tools/perf/util/bpf_counter.c
- if (evsel->leader->core.nr_members > 1) {
+ if (evsel->core.leader->nr_members > 1) {
Signed-off-by: Jiri Olsa <[email protected]>
Requested-by: Shunsuke Nakamura <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Michael Petlan <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Move evsel::idx to perf_evsel::idx, so we can move the group interface
to libperf.
Committer notes:
Fixup evsel->idx usage in tools/perf/util/bpf_counter_cgroup.c, that
appeared in my tree in my local tree.
Also fixed up these:
$ find tools/perf/ -name "*.[ch]" | xargs grep 'evsel->idx'
tools/perf/ui/gtk/annotate.c: evsel->idx + i);
tools/perf/ui/gtk/annotate.c: evsel->idx);
$
That running 'make -C tools/perf build-test' caught.
Signed-off-by: Jiri Olsa <[email protected]>
Requested-by: Shunsuke Nakamura <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Michael Petlan <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Make tests to be two binaries 'tests_static' and 'tests_shared', so the
maintenance is easier.
Adding tests under libperf build system, so we define all the flags just
once.
Adding make-tests tule to just compile tests without running them.
Signed-off-by: Jiri Olsa <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Michael Petlan <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Shunsuke Nakamura <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|