| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
This idea was introduced by David Rientjes[1].
Introduce a new madvise mode, MADV_COLLAPSE, that allows users to request
a synchronous collapse of memory at their own expense.
The benefits of this approach are:
* CPU is charged to the process that wants to spend the cycles for the
THP
* Avoid unpredictable timing of khugepaged collapse
Semantics
This call is independent of the system-wide THP sysfs settings, but will
fail for memory marked VM_NOHUGEPAGE. If the ranges provided span
multiple VMAs, the semantics of the collapse over each VMA is independent
from the others. This implies a hugepage cannot cross a VMA boundary. If
collapse of a given hugepage-aligned/sized region fails, the operation may
continue to attempt collapsing the remainder of memory specified.
The memory ranges provided must be page-aligned, but are not required to
be hugepage-aligned. If the memory ranges are not hugepage-aligned, the
start/end of the range will be clamped to the first/last hugepage-aligned
address covered by said range. The memory ranges must span at least one
hugepage-sized region.
All non-resident pages covered by the range will first be
swapped/faulted-in, before being internally copied onto a freshly
allocated hugepage. Unmapped pages will have their data directly
initialized to 0 in the new hugepage. However, for every eligible
hugepage aligned/sized region to-be collapsed, at least one page must
currently be backed by memory (a PMD covering the address range must
already exist).
Allocation for the new hugepage may enter direct reclaim and/or
compaction, regardless of VMA flags. When the system has multiple NUMA
nodes, the hugepage will be allocated from the node providing the most
native pages. This operation operates on the current state of the
specified process and makes no persistent changes or guarantees on how
pages will be mapped, constructed, or faulted in the future
Return Value
If all hugepage-sized/aligned regions covered by the provided range were
either successfully collapsed, or were already PMD-mapped THPs, this
operation will be deemed successful. On success, process_madvise(2)
returns the number of bytes advised, and madvise(2) returns 0. Else, -1
is returned and errno is set to indicate the error for the most-recently
attempted hugepage collapse. Note that many failures might have occurred,
since the operation may continue to collapse in the event a single
hugepage-sized/aligned region fails.
ENOMEM Memory allocation failed or VMA not found
EBUSY Memcg charging failed
EAGAIN Required resource temporarily unavailable. Try again
might succeed.
EINVAL Other error: No PMD found, subpage doesn't have Present
bit set, "Special" page no backed by struct page, VMA
incorrectly sized, address not page-aligned, ...
Most notable here is ENOMEM and EBUSY (new to madvise) which are intended
to provide the caller with actionable feedback so they may take an
appropriate fallback measure.
Use Cases
An immediate user of this new functionality are malloc() implementations
that manage memory in hugepage-sized chunks, but sometimes subrelease
memory back to the system in native-sized chunks via MADV_DONTNEED;
zapping the pmd. Later, when the memory is hot, the implementation could
madvise(MADV_COLLAPSE) to re-back the memory by THPs to regain hugepage
coverage and dTLB performance. TCMalloc is such an implementation that
could benefit from this[2].
Only privately-mapped anon memory is supported for now, but additional
support for file, shmem, and HugeTLB high-granularity mappings[2] is
expected. File and tmpfs/shmem support would permit:
* Backing executable text by THPs. Current support provided by
CONFIG_READ_ONLY_THP_FOR_FS may take a long time on a large system which
might impair services from serving at their full rated load after
(re)starting. Tricks like mremap(2)'ing text onto anonymous memory to
immediately realize iTLB performance prevents page sharing and demand
paging, both of which increase steady state memory footprint. With
MADV_COLLAPSE, we get the best of both worlds: Peak upfront performance
and lower RAM footprints.
* Backing guest memory by hugapages after the memory contents have been
migrated in native-page-sized chunks to a new host, in a
userfaultfd-based live-migration stack.
[1] https://lore.kernel.org/linux-mm/[email protected]/
[2] https://github.com/google/tcmalloc/tree/master/tcmalloc
[[email protected]: avoid possible memory leak in failure path]
Link: https://lkml.kernel.org/r/[email protected]
[[email protected] add missing kfree() to madvise_collapse()]
Link: https://lore.kernel.org/linux-mm/[email protected]/
Link: https://lkml.kernel.org/r/[email protected]
[[email protected]: delay computation of hpage boundaries until use]]
Link: https://lkml.kernel.org/r/[email protected]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Zach O'Keefe <[email protected]>
Signed-off-by: "Souptick Joarder (HPE)" <[email protected]>
Suggested-by: David Rientjes <[email protected]>
Cc: Alex Shi <[email protected]>
Cc: Andrea Arcangeli <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Cc: Axel Rasmussen <[email protected]>
Cc: Chris Kennelly <[email protected]>
Cc: Chris Zankel <[email protected]>
Cc: David Hildenbrand <[email protected]>
Cc: Helge Deller <[email protected]>
Cc: Hugh Dickins <[email protected]>
Cc: Ivan Kokshaysky <[email protected]>
Cc: James Bottomley <[email protected]>
Cc: Jens Axboe <[email protected]>
Cc: "Kirill A. Shutemov" <[email protected]>
Cc: Matthew Wilcox <[email protected]>
Cc: Matt Turner <[email protected]>
Cc: Max Filippov <[email protected]>
Cc: Miaohe Lin <[email protected]>
Cc: Michal Hocko <[email protected]>
Cc: Minchan Kim <[email protected]>
Cc: Pasha Tatashin <[email protected]>
Cc: Pavel Begunkov <[email protected]>
Cc: Peter Xu <[email protected]>
Cc: Rongwei Wang <[email protected]>
Cc: SeongJae Park <[email protected]>
Cc: Song Liu <[email protected]>
Cc: Thomas Bogendoerfer <[email protected]>
Cc: Vlastimil Babka <[email protected]>
Cc: Yang Shi <[email protected]>
Cc: Zi Yan <[email protected]>
Cc: Dan Carpenter <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic updates from Arnd Bergmann:
"There are three independent sets of changes:
- Sai Prakash Ranjan adds tracing support to the asm-generic version
of the MMIO accessors, which is intended to help understand
problems with device drivers and has been part of Qualcomm's vendor
kernels for many years
- A patch from Sebastian Siewior to rework the handling of IRQ stacks
in softirqs across architectures, which is needed for enabling
PREEMPT_RT
- The last patch to remove the CONFIG_VIRT_TO_BUS option and some of
the code behind that, after the last users of this old interface
made it in through the netdev, scsi, media and staging trees"
* tag 'asm-generic-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
uapi: asm-generic: fcntl: Fix typo 'the the' in comment
arch/*/: remove CONFIG_VIRT_TO_BUS
soc: qcom: geni: Disable MMIO tracing for GENI SE
serial: qcom_geni_serial: Disable MMIO tracing for geni serial
asm-generic/io: Add logging support for MMIO accessors
KVM: arm64: Add a flag to disable MMIO trace for nVHE KVM
lib: Add register read/write tracing support
drm/meson: Fix overflow implicit truncation warnings
irqchip/tegra: Fix overflow implicit truncation warnings
coresight: etm4x: Use asm-generic IO memory barriers
arm64: io: Use asm-generic high level MMIO accessors
arch/*: Disable softirq stacks on PREEMPT_RT.
|
|
Replace 'the the' with 'the' in the comment.
Signed-off-by: Slark Xiao <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
Building perf for MIPS failed after 9f79b8b72339 ("uapi: simplify
__ARCH_FLOCK{,64}_PAD a little") with the following error:
CC
/home/fainelli/work/buildroot/output/bmips/build/linux-custom/tools/perf/trace/beauty/fcntl.o
In file included from
../../../../host/mipsel-buildroot-linux-gnu/sysroot/usr/include/asm/fcntl.h:77,
from ../include/uapi/linux/fcntl.h:5,
from trace/beauty/fcntl.c:10:
../include/uapi/asm-generic/fcntl.h:188:8: error: redefinition of
'struct flock'
struct flock {
^~~~~
In file included from ../include/uapi/linux/fcntl.h:5,
from trace/beauty/fcntl.c:10:
../../../../host/mipsel-buildroot-linux-gnu/sysroot/usr/include/asm/fcntl.h:63:8:
note: originally defined here
struct flock {
^~~~~
This is due to the local copy under
tools/include/uapi/asm-generic/fcntl.h including the toolchain's kernel
headers which already define 'struct flock' and define
HAVE_ARCH_STRUCT_FLOCK to future inclusions make a decision as to
whether re-defining 'struct flock' is appropriate or not.
Make sure what do not re-define 'struct flock'
when HAVE_ARCH_STRUCT_FLOCK is already defined.
Fixes: 9f79b8b72339 ("uapi: simplify __ARCH_FLOCK{,64}_PAD a little")
Signed-off-by: Florian Fainelli <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
[arnd: sync with include/uapi/asm-generic/fcntl.h as well]
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
- Support for the Svpbmt extension, which allows memory attributes to
be encoded in pages
- Support for the Allwinner D1's implementation of page-based memory
attributes
- Support for running rv32 binaries on rv64 systems, via the compat
subsystem
- Support for kexec_file()
- Support for the new generic ticket-based spinlocks, which allows us
to also move to qrwlock. These should have already gone in through
the asm-geneic tree as well
- A handful of cleanups and fixes, include some larger ones around
atomics and XIP
* tag 'riscv-for-linus-5.19-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (51 commits)
RISC-V: Prepare dropping week attribute from arch_kexec_apply_relocations[_add]
riscv: compat: Using seperated vdso_maps for compat_vdso_info
RISC-V: Fix the XIP build
RISC-V: Split out the XIP fixups into their own file
RISC-V: ignore xipImage
RISC-V: Avoid empty create_*_mapping definitions
riscv: Don't output a bogus mmu-type on a no MMU kernel
riscv: atomic: Add custom conditional atomic operation implementation
riscv: atomic: Optimize dec_if_positive functions
riscv: atomic: Cleanup unnecessary definition
RISC-V: Load purgatory in kexec_file
RISC-V: Add purgatory
RISC-V: Support for kexec_file on panic
RISC-V: Add kexec_file support
RISC-V: use memcpy for kexec_file mode
kexec_file: Fix kexec_file.c build error for riscv platform
riscv: compat: Add COMPAT Kbuild skeletal support
riscv: compat: ptrace: Add compat_arch_ptrace implement
riscv: compat: signal: Add rt_frame implementation
riscv: add memory-type errata for T-Head
...
|
|
Adding a new socket option, SO_RCVMARK, to indicate that SO_MARK
should be included in the ancillary data returned by recvmsg().
Renamed the sock_recv_ts_and_drops() function to sock_recv_cmsgs().
Signed-off-by: Erin MacNeil <[email protected]>
Reviewed-by: Eric Dumazet <[email protected]>
Reviewed-by: David Ahern <[email protected]>
Acked-by: Marc Kleine-Budde <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Make "uapi asm unistd.h" could be used for architectures' COMPAT
mode. The __SYSCALL_COMPAT is first used in riscv.
Signed-off-by: Guo Ren <[email protected]>
Signed-off-by: Guo Ren <[email protected]>
Reviewed-by: Arnd Bergmann <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Tested-by: Heiko Stuebner <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Palmer Dabbelt <[email protected]>
|
|
The F_GETLK64/F_SETLK64/F_SETLKW64 fcntl opcodes are only implemented
for the 32-bit syscall APIs, but are also needed for compat handling
on 64-bit kernels.
Consolidate them in unistd.h instead of definining the internal compat
definitions in compat.h, which is rather error prone (e.g. parisc
gets the values wrong currently).
Note that before this change they were never visible to userspace due
to the fact that CONFIG_64BIT is only set for kernel builds.
Signed-off-by: Christoph Hellwig <[email protected]>
Signed-off-by: Guo Ren <[email protected]>
Reviewed-by: Arnd Bergmann <[email protected]>
Tested-by: Heiko Stuebner <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Palmer Dabbelt <[email protected]>
|
|
Don't bother to define the symbols empty, just don't use them.
That makes the intent a little more clear.
Remove the unused HAVE_ARCH_STRUCT_FLOCK64 define and merge the
32-bit mips struct flock into the generic one.
Add a new __ARCH_FLOCK_EXTRA_SYSID macro following the style of
__ARCH_FLOCK_PAD to avoid having a separate definition just for
one architecture.
Signed-off-by: Christoph Hellwig <[email protected]>
Signed-off-by: Guo Ren <[email protected]>
Reviewed-by: Arnd Bergmann <[email protected]>
Tested-by: Heiko Stuebner <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Palmer Dabbelt <[email protected]>
|
|
To pick the changes from:
9457056ac426e5ed ("mm: madvise: MADV_DONTNEED_LOCKED")
That result in these changes in the tools:
$ diff -u tools/include/uapi/asm-generic/mman-common.h include/uapi/asm-generic/mman-common.h
--- tools/include/uapi/asm-generic/mman-common.h 2022-03-29 16:17:50.461694991 -0300
+++ include/uapi/asm-generic/mman-common.h 2022-03-27 19:12:48.923250468 -0300
@@ -75,6 +75,8 @@
#define MADV_POPULATE_READ 22 /* populate (prefault) page tables readable */
#define MADV_POPULATE_WRITE 23 /* populate (prefault) page tables writable */
+#define MADV_DONTNEED_LOCKED 24 /* like DONTNEED, but drop locked pages too */
+
/* compatibility flags */
#define MAP_FILE 0
$ tools/perf/trace/beauty/madvise_behavior.sh > before
$ cp include/uapi/asm-generic/mman-common.h tools/include/uapi/asm-generic/mman-common.h
$ tools/perf/trace/beauty/madvise_behavior.sh > after
$ diff -u before after
--- before 2022-03-29 16:18:04.091044244 -0300
+++ after 2022-03-29 16:18:11.692238906 -0300
@@ -20,6 +20,7 @@
[21] = "PAGEOUT",
[22] = "POPULATE_READ",
[23] = "POPULATE_WRITE",
+ [24] = "DONTNEED_LOCKED",
[100] = "HWPOISON",
[101] = "SOFT_OFFLINE",
};
$
I.e. now when madvise gets those behaviours as args, 'perf trace' will
be able to translate from the number to a human readable string and to
use the strings in tracepoint filter expressions.
This addresses the following perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/asm-generic/mman-common.h' differs from latest version at 'include/uapi/asm-generic/mman-common.h'
diff -u tools/include/uapi/asm-generic/mman-common.h include/uapi/asm-generic/mman-common.h
Cc: Adrian Hunter <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Johannes Weiner <[email protected]>
Cc: Namhyung Kim <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
To pick the changes in these csets:
21b084fdf2a49ca1 ("mm/mempolicy: wire up syscall set_mempolicy_home_node")
That add support for this new syscall in tools such as 'perf trace'.
For instance, this is now possible:
[root@five ~]# perf trace -e set_mempolicy_home_node
^C[root@five ~]#
[root@five ~]# perf trace -v -e set_mempolicy_home_node
Using CPUID AuthenticAMD-25-21-0
event qualifier tracepoint filter: (common_pid != 253729 && common_pid != 3585) && (id == 450)
mmap size 528384B
^C[root@five ~]
[root@five ~]# perf trace -v -e set* --max-events 5
Using CPUID AuthenticAMD-25-21-0
event qualifier tracepoint filter: (common_pid != 253734 && common_pid != 3585) && (id == 38 || id == 54 || id == 105 || id == 106 || id == 109 || id == 112 || id == 113 || id == 114 || id == 116 || id == 117 || id == 119 || id == 122 || id == 123 || id == 141 || id == 160 || id == 164 || id == 170 || id == 171 || id == 188 || id == 205 || id == 218 || id == 238 || id == 273 || id == 308 || id == 450)
mmap size 528384B
0.000 ( 0.008 ms): bash/253735 setpgid(pid: 253735 (bash), pgid: 253735 (bash)) = 0
6849.011 ( 0.008 ms): bash/16046 setpgid(pid: 253736 (bash), pgid: 253736 (bash)) = 0
6849.080 ( 0.005 ms): bash/253736 setpgid(pid: 253736 (bash), pgid: 253736 (bash)) = 0
7437.718 ( 0.009 ms): gnome-shell/253737 set_robust_list(head: 0x7f34b527e920, len: 24) = 0
13445.986 ( 0.010 ms): bash/16046 setpgid(pid: 253738 (bash), pgid: 253738 (bash)) = 0
[root@five ~]#
That is the filter expression attached to the raw_syscalls:sys_{enter,exit}
tracepoints.
$ find tools/perf/arch/ -name "syscall*tbl" | xargs grep -w set_mempolicy_home_node
tools/perf/arch/mips/entry/syscalls/syscall_n64.tbl:450 common set_mempolicy_home_node sys_set_mempolicy_home_node
tools/perf/arch/powerpc/entry/syscalls/syscall.tbl:450 nospu set_mempolicy_home_node sys_set_mempolicy_home_node
tools/perf/arch/s390/entry/syscalls/syscall.tbl:450 common set_mempolicy_home_node sys_set_mempolicy_home_node sys_set_mempolicy_home_node
tools/perf/arch/x86/entry/syscalls/syscall_64.tbl:450 common set_mempolicy_home_node sys_set_mempolicy_home_node
$
$ grep -w set_mempolicy_home_node /tmp/build/perf/arch/x86/include/generated/asm/syscalls_64.c
[450] = "set_mempolicy_home_node",
$
This addresses these perf build warnings:
Warning: Kernel ABI header at 'tools/include/uapi/asm-generic/unistd.h' differs from latest version at 'include/uapi/asm-generic/unistd.h'
diff -u tools/include/uapi/asm-generic/unistd.h include/uapi/asm-generic/unistd.h
Warning: Kernel ABI header at 'tools/perf/arch/x86/entry/syscalls/syscall_64.tbl' differs from latest version at 'arch/x86/entry/syscalls/syscall_64.tbl'
diff -u tools/perf/arch/x86/entry/syscalls/syscall_64.tbl arch/x86/entry/syscalls/syscall_64.tbl
Warning: Kernel ABI header at 'tools/perf/arch/powerpc/entry/syscalls/syscall.tbl' differs from latest version at 'arch/powerpc/kernel/syscalls/syscall.tbl'
diff -u tools/perf/arch/powerpc/entry/syscalls/syscall.tbl arch/powerpc/kernel/syscalls/syscall.tbl
Warning: Kernel ABI header at 'tools/perf/arch/s390/entry/syscalls/syscall.tbl' differs from latest version at 'arch/s390/kernel/syscalls/syscall.tbl'
diff -u tools/perf/arch/s390/entry/syscalls/syscall.tbl arch/s390/kernel/syscalls/syscall.tbl
Warning: Kernel ABI header at 'tools/perf/arch/mips/entry/syscalls/syscall_n64.tbl' differs from latest version at 'arch/mips/kernel/syscalls/syscall_n64.tbl'
diff -u tools/perf/arch/mips/entry/syscalls/syscall_n64.tbl arch/mips/kernel/syscalls/syscall_n64.tbl
Cc: Aneesh Kumar K.V <[email protected]>
Cc: Linus Torvalds <[email protected]>
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
To pick the changes in these csets:
039c0ec9bb77446d ("futex,x86: Wire up sys_futex_waitv()")
bf69bad38cf63d98 ("futex: Implement sys_futex_waitv()")
That add support for this new syscall in tools such as 'perf trace'.
For instance, this is now possible:
# perf trace -e futex_waitv
^C#
# perf trace -v -e futex_waitv
Using CPUID AuthenticAMD-25-21-0
event qualifier tracepoint filter: (common_pid != 807333 && common_pid != 3564) && (id == 449)
mmap size 528384B
^C#
# perf trace -v -e futex* --max-events 10
Using CPUID AuthenticAMD-25-21-0
event qualifier tracepoint filter: (common_pid != 812168 && common_pid != 3564) && (id == 202 || id == 449)
mmap size 528384B
? ( ): Timer/219310 ... [continued]: futex()) = -1 ETIMEDOUT (Connection timed out)
0.012 ( 0.002 ms): Timer/219310 futex(uaddr: 0x7fd0b152d3c8, op: WAKE|PRIVATE_FLAG, val: 1) = 0
0.024 ( 0.060 ms): Timer/219310 futex(uaddr: 0x7fd0b152d420, op: WAIT_BITSET|PRIVATE_FLAG, utime: 0x7fd0b1657840, val3: MATCH_ANY) = 0
0.086 ( 0.001 ms): Timer/219310 futex(uaddr: 0x7fd0b152d3c8, op: WAKE|PRIVATE_FLAG, val: 1) = 0
0.088 ( ): Timer/219310 futex(uaddr: 0x7fd0b152d424, op: WAIT_BITSET|PRIVATE_FLAG, utime: 0x7fd0b1657840, val3: MATCH_ANY) ...
0.075 ( 0.005 ms): Web Content/219299 futex(uaddr: 0x7fd0b152d420, op: WAKE|PRIVATE_FLAG, val: 1) = 1
0.169 ( 0.004 ms): Web Content/219299 futex(uaddr: 0x7fd0b152d424, op: WAKE|PRIVATE_FLAG, val: 1) = 1
0.088 ( 0.089 ms): Timer/219310 ... [continued]: futex()) = 0
0.179 ( 0.001 ms): Timer/219310 futex(uaddr: 0x7fd0b152d3c8, op: WAKE|PRIVATE_FLAG, val: 1) = 0
0.181 ( ): Timer/219310 futex(uaddr: 0x7fd0b152d420, op: WAIT_BITSET|PRIVATE_FLAG, utime: 0x7fd0b1657840, val3: MATCH_ANY) ...
#
That is the filter expression attached to the raw_syscalls:sys_{enter,exit}
tracepoints.
$ grep futex_waitv tools/perf/arch/x86/entry/syscalls/syscall_64.tbl
449 common futex_waitv sys_futex_waitv
$
This addresses these perf build warnings:
Warning: Kernel ABI header at 'tools/include/uapi/asm-generic/unistd.h' differs from latest version at 'include/uapi/asm-generic/unistd.h'
diff -u tools/include/uapi/asm-generic/unistd.h include/uapi/asm-generic/unistd.h
Warning: Kernel ABI header at 'tools/perf/arch/x86/entry/syscalls/syscall_64.tbl' differs from latest version at 'arch/x86/entry/syscalls/syscall_64.tbl'
diff -u tools/perf/arch/x86/entry/syscalls/syscall_64.tbl arch/x86/entry/syscalls/syscall_64.tbl
Cc: André Almeida <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
the removal of some compat entry points
To pick the changes in these csets:
59ab844eed9c6b01 ("compat: remove some compat entry points")
dce49103962840dd ("mm: wire up syscall process_mrelease")
b48c7236b13cb5ef ("exit/bdflush: Remove the deprecated bdflush system call")
That add support for this new syscall in tools such as 'perf trace'.
For instance, this is now possible:
# perf trace -v -e process_mrelease
event qualifier tracepoint filter: (common_pid != 19351 && common_pid != 9112) && (id == 448)
^C#
That is the filter expression attached to the raw_syscalls:sys_{enter,exit}
tracepoints.
$ grep process_mrelease tools/perf/arch/x86/entry/syscalls/syscall_64.tbl
448 common process_mrelease sys_process_mrelease
$
This addresses these perf build warnings:
Warning: Kernel ABI header at 'tools/include/uapi/asm-generic/unistd.h' differs from latest version at 'include/uapi/asm-generic/unistd.h'
diff -u tools/include/uapi/asm-generic/unistd.h include/uapi/asm-generic/unistd.h
Warning: Kernel ABI header at 'tools/perf/arch/x86/entry/syscalls/syscall_64.tbl' differs from latest version at 'arch/x86/entry/syscalls/syscall_64.tbl'
diff -u tools/perf/arch/x86/entry/syscalls/syscall_64.tbl arch/x86/entry/syscalls/syscall_64.tbl
Warning: Kernel ABI header at 'tools/perf/arch/powerpc/entry/syscalls/syscall.tbl' differs from latest version at 'arch/powerpc/kernel/syscalls/syscall.tbl'
diff -u tools/perf/arch/powerpc/entry/syscalls/syscall.tbl arch/powerpc/kernel/syscalls/syscall.tbl
Warning: Kernel ABI header at 'tools/perf/arch/s390/entry/syscalls/syscall.tbl' differs from latest version at 'arch/s390/kernel/syscalls/syscall.tbl'
diff -u tools/perf/arch/s390/entry/syscalls/syscall.tbl arch/s390/kernel/syscalls/syscall.tbl
Warning: Kernel ABI header at 'tools/perf/arch/mips/entry/syscalls/syscall_n64.tbl' differs from latest version at 'arch/mips/kernel/syscalls/syscall_n64.tbl'
diff -u tools/perf/arch/mips/entry/syscalls/syscall_n64.tbl arch/mips/kernel/syscalls/syscall_n64.tbl
Cc: Arnd Bergmann <[email protected]>
Cc: Eric W. Biederman <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Suren Baghdasaryan <[email protected]>
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
To pick the changes in this cset:
7bb7f2ac24a028b2 ("arch, mm: wire up memfd_secret system call where relevant")
That silences these perf build warnings and add support for those new
syscalls in tools such as 'perf trace'.
For instance, this is now possible:
# perf trace -v -e memfd_secret
event qualifier tracepoint filter: (common_pid != 13375 && common_pid != 3713) && (id == 447)
^C#
That is the filter expression attached to the raw_syscalls:sys_{enter,exit}
tracepoints.
$ grep memfd_secret tools/perf/arch/x86/entry/syscalls/syscall_64.tbl
447 common memfd_secret sys_memfd_secret
$
This addresses these perf build warnings:
Warning: Kernel ABI header at 'tools/arch/arm64/include/uapi/asm/unistd.h' differs from latest version at 'arch/arm64/include/uapi/asm/unistd.h'
diff -u tools/arch/arm64/include/uapi/asm/unistd.h arch/arm64/include/uapi/asm/unistd.h
Warning: Kernel ABI header at 'tools/include/uapi/asm-generic/unistd.h' differs from latest version at 'include/uapi/asm-generic/unistd.h'
diff -u tools/include/uapi/asm-generic/unistd.h include/uapi/asm-generic/unistd.h
Warning: Kernel ABI header at 'tools/perf/arch/x86/entry/syscalls/syscall_64.tbl' differs from latest version at 'arch/x86/entry/syscalls/syscall_64.tbl'
diff -u tools/perf/arch/x86/entry/syscalls/syscall_64.tbl arch/x86/entry/syscalls/syscall_64.tbl
Cc: Linus Torvalds <[email protected]>
Cc: Mike Rapoport <[email protected]>
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
To pick the changes in these csets:
64c2c2c62f92339b ("quota: Change quotactl_path() systcall to an fd-based one")
65ffb3d69ed3da28 ("quota: Wire up quotactl_fd syscall")
That silences these perf build warnings and add support for those new
syscalls in tools such as 'perf trace'.
For instance, this is now possible:
# perf trace -v -e quota*
event qualifier tracepoint filter: (common_pid != 158365 && common_pid != 2512) && (id == 179 || id == 443)
^C#
That is the filter expression attached to the raw_syscalls:sys_{enter,exit}
tracepoints.
$ grep quota tools/perf/arch/x86/entry/syscalls/syscall_64.tbl
179 common quotactl sys_quotactl
443 common quotactl_fd sys_quotactl_fd
$
This addresses these perf build warnings:
Warning: Kernel ABI header at 'tools/include/uapi/asm-generic/unistd.h' differs from latest version at 'include/uapi/asm-generic/unistd.h'
diff -u tools/include/uapi/asm-generic/unistd.h include/uapi/asm-generic/unistd.h
Warning: Kernel ABI header at 'tools/perf/arch/x86/entry/syscalls/syscall_64.tbl' differs from latest version at 'arch/x86/entry/syscalls/syscall_64.tbl'
diff -u tools/perf/arch/x86/entry/syscalls/syscall_64.tbl arch/x86/entry/syscalls/syscall_64.tbl
Warning: Kernel ABI header at 'tools/perf/arch/powerpc/entry/syscalls/syscall.tbl' differs from latest version at 'arch/powerpc/kernel/syscalls/syscall.tbl'
diff -u tools/perf/arch/powerpc/entry/syscalls/syscall.tbl arch/powerpc/kernel/syscalls/syscall.tbl
Warning: Kernel ABI header at 'tools/perf/arch/s390/entry/syscalls/syscall.tbl' differs from latest version at 'arch/s390/kernel/syscalls/syscall.tbl'
diff -u tools/perf/arch/s390/entry/syscalls/syscall.tbl arch/s390/kernel/syscalls/syscall.tbl
Warning: Kernel ABI header at 'tools/perf/arch/mips/entry/syscalls/syscall_n64.tbl' differs from latest version at 'arch/mips/kernel/syscalls/syscall_n64.tbl'
diff -u tools/perf/arch/mips/entry/syscalls/syscall_n64.tbl arch/mips/kernel/syscalls/syscall_n64.tbl
Cc: Jan Kara <[email protected]>
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
To pick the changes from:
Fixes: 4ca9b3859dac14bb ("mm/madvise: introduce MADV_POPULATE_(READ|WRITE) to prefault page tables")
That result in these changes in the tools:
$ tools/perf/trace/beauty/madvise_behavior.sh > before
$ cp include/uapi/asm-generic/mman-common.h tools/include/uapi/asm-generic/mman-common.h
$ tools/perf/trace/beauty/madvise_behavior.sh > after
$ diff -u before after
--- before 2021-07-05 14:30:15.167212621 -0300
+++ after 2021-07-05 14:30:26.638462594 -0300
@@ -18,6 +18,8 @@
[19] = "KEEPONFORK",
[20] = "COLD",
[21] = "PAGEOUT",
+ [22] = "POPULATE_READ",
+ [23] = "POPULATE_WRITE",
[100] = "HWPOISON",
[101] = "SOFT_OFFLINE",
};
$
I.e. now when madvise gets those behaviours as args, it will be able to
translate from the number to a human readable string.
This addresses the following perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/asm-generic/mman-common.h' differs from latest version at 'include/uapi/asm-generic/mman-common.h'
diff -u tools/include/uapi/asm-generic/mman-common.h include/uapi/asm-generic/mman-common.h
Cc: David Hildenbrand <[email protected]>
Cc: Linus Torvalds <[email protected]>
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
To pick the changes in:
8b1462b67f23da54 ("quota: finish disable quotactl_path syscall")
Those headers are used in some arches to generate the syscall table used
in 'perf trace' to translate syscall numbers into strings.
This addresses this perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/asm-generic/unistd.h' differs from latest version at 'include/uapi/asm-generic/unistd.h'
diff -u tools/include/uapi/asm-generic/unistd.h include/uapi/asm-generic/unistd.h
Cc: Jan Kara <[email protected]>
Cc: Marcin Juszkiewicz <[email protected]>
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
mount_settattr new syscalls
To pick the changes in these csets:
a49f4f81cb48925e ("arch: Wire up Landlock syscalls")
2a1867219c7b27f9 ("fs: add mount_setattr()")
fa8b90070a80bb1a ("quota: wire up quotactl_path")
That silences these perf build warnings and add support for those new
syscalls in tools such as 'perf trace'.
For instance, this is now possible:
# ~acme/bin/perf trace -v -e landlock*
event qualifier tracepoint filter: (common_pid != 129365 && common_pid != 3502) && (id == 444 || id == 445 || id == 446)
^C#
That is tha filter expression attached to the raw_syscalls:sys_{enter,exit}
tracepoints.
$ grep landlock tools/perf/arch/x86/entry/syscalls/syscall_64.tbl
444 common landlock_create_ruleset sys_landlock_create_ruleset
445 common landlock_add_rule sys_landlock_add_rule
446 common landlock_restrict_self sys_landlock_restrict_self
$
This addresses these perf build warnings:
Warning: Kernel ABI header at 'tools/include/uapi/asm-generic/unistd.h' differs from latest version at 'include/uapi/asm-generic/unistd.h'
diff -u tools/include/uapi/asm-generic/unistd.h include/uapi/asm-generic/unistd.h
Warning: Kernel ABI header at 'tools/perf/arch/x86/entry/syscalls/syscall_64.tbl' differs from latest version at 'arch/x86/entry/syscalls/syscall_64.tbl'
diff -u tools/perf/arch/x86/entry/syscalls/syscall_64.tbl arch/x86/entry/syscalls/syscall_64.tbl
Warning: Kernel ABI header at 'tools/perf/arch/powerpc/entry/syscalls/syscall.tbl' differs from latest version at 'arch/powerpc/kernel/syscalls/syscall.tbl'
diff -u tools/perf/arch/powerpc/entry/syscalls/syscall.tbl arch/powerpc/kernel/syscalls/syscall.tbl
Warning: Kernel ABI header at 'tools/perf/arch/s390/entry/syscalls/syscall.tbl' differs from latest version at 'arch/s390/kernel/syscalls/syscall.tbl'
diff -u tools/perf/arch/s390/entry/syscalls/syscall.tbl arch/s390/kernel/syscalls/syscall.tbl
Warning: Kernel ABI header at 'tools/perf/arch/mips/entry/syscalls/syscall_n64.tbl' differs from latest version at 'arch/mips/kernel/syscalls/syscall_n64.tbl'
diff -u tools/perf/arch/mips/entry/syscalls/syscall_n64.tbl arch/mips/kernel/syscalls/syscall_n64.tbl
Cc: Christian Brauner <[email protected]>
Cc: James Morris <[email protected]>
Cc: Jan Kara <[email protected]>
Cc: Mickaël Salaün <[email protected]>
Cc: Sascha Hauer <[email protected]>
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
This implements the missing mount_setattr() syscall. While the new mount
api allows to change the properties of a superblock there is currently
no way to change the properties of a mount or a mount tree using file
descriptors which the new mount api is based on. In addition the old
mount api has the restriction that mount options cannot be applied
recursively. This hasn't changed since changing mount options on a
per-mount basis was implemented in [1] and has been a frequent request
not just for convenience but also for security reasons. The legacy
mount syscall is unable to accommodate this behavior without introducing
a whole new set of flags because MS_REC | MS_REMOUNT | MS_BIND |
MS_RDONLY | MS_NOEXEC | [...] only apply the mount option to the topmost
mount. Changing MS_REC to apply to the whole mount tree would mean
introducing a significant uapi change and would likely cause significant
regressions.
The new mount_setattr() syscall allows to recursively clear and set
mount options in one shot. Multiple calls to change mount options
requesting the same changes are idempotent:
int mount_setattr(int dfd, const char *path, unsigned flags,
struct mount_attr *uattr, size_t usize);
Flags to modify path resolution behavior are specified in the @flags
argument. Currently, AT_EMPTY_PATH, AT_RECURSIVE, AT_SYMLINK_NOFOLLOW,
and AT_NO_AUTOMOUNT are supported. If useful, additional lookup flags to
restrict path resolution as introduced with openat2() might be supported
in the future.
The mount_setattr() syscall can be expected to grow over time and is
designed with extensibility in mind. It follows the extensible syscall
pattern we have used with other syscalls such as openat2(), clone3(),
sched_{set,get}attr(), and others.
The set of mount options is passed in the uapi struct mount_attr which
currently has the following layout:
struct mount_attr {
__u64 attr_set;
__u64 attr_clr;
__u64 propagation;
__u64 userns_fd;
};
The @attr_set and @attr_clr members are used to clear and set mount
options. This way a user can e.g. request that a set of flags is to be
raised such as turning mounts readonly by raising MOUNT_ATTR_RDONLY in
@attr_set while at the same time requesting that another set of flags is
to be lowered such as removing noexec from a mount tree by specifying
MOUNT_ATTR_NOEXEC in @attr_clr.
Note, since the MOUNT_ATTR_<atime> values are an enum starting from 0,
not a bitmap, users wanting to transition to a different atime setting
cannot simply specify the atime setting in @attr_set, but must also
specify MOUNT_ATTR__ATIME in the @attr_clr field. So we ensure that
MOUNT_ATTR__ATIME can't be partially set in @attr_clr and that @attr_set
can't have any atime bits set if MOUNT_ATTR__ATIME isn't set in
@attr_clr.
The @propagation field lets callers specify the propagation type of a
mount tree. Propagation is a single property that has four different
settings and as such is not really a flag argument but an enum.
Specifically, it would be unclear what setting and clearing propagation
settings in combination would amount to. The legacy mount() syscall thus
forbids the combination of multiple propagation settings too. The goal
is to keep the semantics of mount propagation somewhat simple as they
are overly complex as it is.
The @userns_fd field lets user specify a user namespace whose idmapping
becomes the idmapping of the mount. This is implemented and explained in
detail in the next patch.
[1]: commit 2e4b7fcd9260 ("[PATCH] r/o bind mounts: honor mount writer counts at remount")
Link: https://lore.kernel.org/r/[email protected]
Cc: David Howells <[email protected]>
Cc: Aleksa Sarai <[email protected]>
Cc: Al Viro <[email protected]>
Cc: [email protected]
Cc: [email protected]
Reviewed-by: Christoph Hellwig <[email protected]>
Signed-off-by: Christian Brauner <[email protected]>
|
|
To pick the changes from:
b0a0c2615f6f199a ("epoll: wire up syscall epoll_pwait2")
That addresses these perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/asm-generic/unistd.h' differs from latest version at 'include/uapi/asm-generic/unistd.h'
diff -u tools/include/uapi/asm-generic/unistd.h include/uapi/asm-generic/unistd.h
Warning: Kernel ABI header at 'tools/perf/arch/x86/entry/syscalls/syscall_64.tbl' differs from latest version at 'arch/x86/entry/syscalls/syscall_64.tbl'
diff -u tools/perf/arch/x86/entry/syscalls/syscall_64.tbl arch/x86/entry/syscalls/syscall_64.tbl
Cc: Adrian Hunter <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Willem de Bruijn <[email protected]>
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Just a comment change, trivial.
Cc: Adrian Hunter <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
To pick the changes from:
ecb8ac8b1f146915 ("mm/madvise: introduce process_madvise() syscall: an external memory hinting API")
That addresses these perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/asm-generic/unistd.h' differs from latest version at 'include/uapi/asm-generic/unistd.h'
diff -u tools/include/uapi/asm-generic/unistd.h include/uapi/asm-generic/unistd.h
Warning: Kernel ABI header at 'tools/perf/arch/x86/entry/syscalls/syscall_64.tbl' differs from latest version at 'arch/x86/entry/syscalls/syscall_64.tbl'
diff -u tools/perf/arch/x86/entry/syscalls/syscall_64.tbl arch/x86/entry/syscalls/syscall_64.tbl
Cc: Adrian Hunter <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Minchan Kim <[email protected]>
Cc: Namhyung Kim <[email protected]>
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull compat mount cleanups from Al Viro:
"The last remnants of mount(2) compat buried by Christoph.
Buried into NFS, that is.
Generally I'm less enthusiastic about "let's use in_compat_syscall()
deep in call chain" kind of approach than Christoph seems to be, but
in this case it's warranted - that had been an NFS-specific wart,
hopefully not to be repeated in any other filesystems (read: any new
filesystem introducing non-text mount options will get NAKed even if
it doesn't mess the layout up).
IOW, not worth trying to grow an infrastructure that would avoid that
use of in_compat_syscall()..."
* 'compat.mount' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fs: remove compat_sys_mount
fs,nfs: lift compat nfs4 mount data handling into the nfs code
nfs: simplify nfs4_parse_monolithic
|
|
Now that import_iovec handles compat iovecs, the native syscalls
can be used for the compat case as well.
Signed-off-by: Christoph Hellwig <[email protected]>
Signed-off-by: Al Viro <[email protected]>
|
|
Now that import_iovec handles compat iovecs, the native vmsplice syscall
can be used for the compat case as well.
Signed-off-by: Christoph Hellwig <[email protected]>
Signed-off-by: Al Viro <[email protected]>
|
|
Now that import_iovec handles compat iovecs, the native readv and writev
syscalls can be used for the compat case as well.
Signed-off-by: Christoph Hellwig <[email protected]>
Signed-off-by: Al Viro <[email protected]>
|
|
compat_sys_mount is identical to the regular sys_mount now, so remove it
and use the native version everywhere.
Signed-off-by: Christoph Hellwig <[email protected]>
Signed-off-by: Al Viro <[email protected]>
|
|
To pick the changes from:
55db9c0e8534 ("net: remove compat_sys_{get,set}sockopt")
9b4feb630e8e ("arch: wire-up close_range()")
That automagically add the 'close_range' syscall to tools such as 'perf
trace'.
Before:
# perf trace -e close_range
event syntax error: 'close_range'
\___ parser error
Run 'perf list' for a list of valid events
Usage: perf trace [<options>] [<command>]
or: perf trace [<options>] -- <command> [<options>]
or: perf trace record [<options>] [<command>]
or: perf trace record [<options>] -- <command> [<options>]
-e, --event <event> event/syscall selector. use 'perf list' to list available events
#
After, system wide strace like tracing for this syscall:
# perf trace -e close_range
^C#
No calls, I need some test proggie :-)
Cc: Adrian Hunter <[email protected]>
Cc: Christian Brauner <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: David S. Miller <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Now that the ->compat_{get,set}sockopt proto_ops methods are gone
there is no good reason left to keep the compat syscalls separate.
This fixes the odd use of unsigned int for the compat_setsockopt
optlen and the missing sock_use_custom_sol_socket.
It would also easily allow running the eBPF hooks for the compat
syscalls, but such a large change in behavior does not belong into
a consolidation patch like this one.
Signed-off-by: Christoph Hellwig <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Update the copies of files affected by:
c8ffd8bcdd28 ("vfs: add faccessat2 syscall")
To address this perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/fcntl.h' differs from latest version at 'include/uapi/linux/fcntl.h'
diff -u tools/include/uapi/linux/fcntl.h include/uapi/linux/fcntl.h
Warning: Kernel ABI header at 'tools/include/uapi/asm-generic/unistd.h' differs from latest version at 'include/uapi/asm-generic/unistd.h'
diff -u tools/include/uapi/asm-generic/unistd.h include/uapi/asm-generic/unistd.h
Warning: Kernel ABI header at 'tools/perf/arch/x86/entry/syscalls/syscall_64.tbl' differs from latest version at 'arch/x86/entry/syscalls/syscall_64.tbl'
diff -u tools/perf/arch/x86/entry/syscalls/syscall_64.tbl arch/x86/entry/syscalls/syscall_64.tbl
Which results in 'perf trace' gaining support for the 'faccessat2'
syscall, now one can use:
# perf trace -e faccessat2
And have system wide tracing of this syscall. And this also will include
it;
# perf trace -e faccess*
Together with the other variants.
How it affects building/usage (on an x86_64 system):
$ cp /tmp/build/perf/arch/x86/include/generated/asm/syscalls_64.c /tmp/syscalls_64.c.before
$
[root@five ~]# perf trace -e faccessat2
event syntax error: 'faccessat2'
\___ parser error
Run 'perf list' for a list of valid events
Usage: perf trace [<options>] [<command>]
or: perf trace [<options>] -- <command> [<options>]
or: perf trace record [<options>] [<command>]
or: perf trace record [<options>] -- <command> [<options>]
-e, --event <event> event/syscall selector. use 'perf list' to list available events
[root@five ~]#
$ cp arch/x86/entry/syscalls/syscall_64.tbl tools/perf/arch/x86/entry/syscalls/syscall_64.tbl
$ git diff
diff --git a/tools/perf/arch/x86/entry/syscalls/syscall_64.tbl b/tools/perf/arch/x86/entry/syscalls/syscall_64.tbl
index 37b844f839bc..78847b32e137 100644
--- a/tools/perf/arch/x86/entry/syscalls/syscall_64.tbl
+++ b/tools/perf/arch/x86/entry/syscalls/syscall_64.tbl
@@ -359,6 +359,7 @@
435 common clone3 sys_clone3
437 common openat2 sys_openat2
438 common pidfd_getfd sys_pidfd_getfd
+439 common faccessat2 sys_faccessat2
#
# x32-specific system call numbers start at 512 to avoid cache impact
$
$ make -C tools/perf O=/tmp/build/perf/ install-bin
<SNIP>
CC /tmp/build/perf/util/syscalltbl.o
LD /tmp/build/perf/util/perf-in.o
LD /tmp/build/perf/perf-in.o
LINK /tmp/build/perf/perf
<SNIP>
[root@five ~]# perf trace -e faccessat2
^C[root@five ~]#
Cc: Miklos Szeredi <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
To pick the changes from:
d41938d2cbee ("mm: Reserve asm-generic prot flags 0x10 and 0x20 for arch use")
No changes in tooling, just a rebuild as files needed got touched.
This addresses the following perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/asm-generic/mman-common.h' differs from latest version at 'include/uapi/asm-generic/mman-common.h'
diff -u tools/include/uapi/asm-generic/mman-common.h include/uapi/asm-generic/mman-common.h
Cc: Adrian Hunter <[email protected]>
Cc: Dave Martin <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Will Deacon <[email protected]>
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
to pick up openat2 and pidfd_getfd
fddb5d430ad9 ("open: introduce openat2(2) syscall")
9a2cef09c801 ("arch: wire up pidfd_getfd syscall")
We also need to grab a copy of uapi/linux/openat2.h since it is now
needed by fcntl.h, add it to tools/perf/check_headers.h.
$ diff -u tools/perf/arch/x86/entry/syscalls/syscall_64.tbl arch/x86/entry/syscalls/syscall_64.tbl
--- tools/perf/arch/x86/entry/syscalls/syscall_64.tbl 2019-12-20 16:43:57.662429958 -0300
+++ arch/x86/entry/syscalls/syscall_64.tbl 2020-02-10 16:36:22.070012468 -0300
@@ -357,6 +357,8 @@
433 common fspick __x64_sys_fspick
434 common pidfd_open __x64_sys_pidfd_open
435 common clone3 __x64_sys_clone3/ptregs
+437 common openat2 __x64_sys_openat2
+438 common pidfd_getfd __x64_sys_pidfd_getfd
#
# x32-specific system call numbers start at 512 to avoid cache impact
$
Update tools/'s copy of that file:
$ cp arch/x86/entry/syscalls/syscall_64.tbl tools/perf/arch/x86/entry/syscalls/syscall_64.tbl
See the result:
$ diff -u /tmp/build/perf/arch/x86/include/generated/asm/syscalls_64.c.before /tmp/build/perf/arch/x86/include/generated/asm/syscalls_64.c
--- /tmp/build/perf/arch/x86/include/generated/asm/syscalls_64.c.before 2020-02-10 16:42:59.010636041 -0300
+++ /tmp/build/perf/arch/x86/include/generated/asm/syscalls_64.c 2020-02-10 16:43:24.149958337 -0300
@@ -346,5 +346,7 @@
[433] = "fspick",
[434] = "pidfd_open",
[435] = "clone3",
+ [437] = "openat2",
+ [438] = "pidfd_getfd",
};
-#define SYSCALLTBL_x86_64_MAX_ID 435
+#define SYSCALLTBL_x86_64_MAX_ID 438
$
Now one can use:
perf trace -e openat2,pidfd_getfd
To get just those syscalls or use in things like:
perf trace -e open*
To get all the open variant (open, openat, openat2, etc) or:
perf trace pidfd*
To get the pidfd syscalls.
Cc: Adrian Hunter <[email protected]>
Cc: Aleksa Sarai <[email protected]>
Cc: Al Viro <[email protected]>
Cc: Christian Brauner <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Sargun Dhillon <[email protected]>
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
To pick the changes from:
1a4e58cce84e ("mm: introduce MADV_PAGEOUT")
9c276cc65a58 ("mm: introduce MADV_COLD")
That result in these changes in the tools:
$ tools/perf/trace/beauty/madvise_behavior.sh > before
$ cp include/uapi/asm-generic/mman-common.h tools/include/uapi/asm-generic/mman-common.h
$ git diff
diff --git a/tools/include/uapi/asm-generic/mman-common.h b/tools/include/uapi/asm-generic/mman-common.h
index 63b1f506ea67..c160a5354eb6 100644
--- a/tools/include/uapi/asm-generic/mman-common.h
+++ b/tools/include/uapi/asm-generic/mman-common.h
@@ -67,6 +67,9 @@
#define MADV_WIPEONFORK 18 /* Zero memory on fork, child only */
#define MADV_KEEPONFORK 19 /* Undo MADV_WIPEONFORK */
+#define MADV_COLD 20 /* deactivate these pages */
+#define MADV_PAGEOUT 21 /* reclaim these pages */
+
/* compatibility flags */
#define MAP_FILE 0
$ tools/perf/trace/beauty/madvise_behavior.sh > after
$ diff -u before after
--- before 2019-09-27 11:29:43.346320100 -0300
+++ after 2019-09-27 11:30:03.838570439 -0300
@@ -16,6 +16,8 @@
[17] = "DODUMP",
[18] = "WIPEONFORK",
[19] = "KEEPONFORK",
+ [20] = "COLD",
+ [21] = "PAGEOUT",
[100] = "HWPOISON",
[101] = "SOFT_OFFLINE",
};
$
I.e. now when madvise gets those behaviours as args, it will be able to
translate from the number to a human readable string.
This addresses the following perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/asm-generic/mman-common.h' differs from latest version at 'include/uapi/asm-generic/mman-common.h'
diff -u tools/include/uapi/asm-generic/mman-common.h include/uapi/asm-generic/mman-common.h
Cc: Adrian Hunter <[email protected]>
Cc: Brendan Gregg <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Luis Cláudio Gonçalves <[email protected]>
Cc: Minchan Kim <[email protected]>
Cc: Namhyung Kim <[email protected]>
Link: https://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
To pick the change from:
78e05972c5e6 ("ipc: fix semtimedop for generic 32-bit architectures")
Which doesn't trigger any change in tooling and silences this perf build
warning:
Warning: Kernel ABI header at 'tools/include/uapi/asm-generic/unistd.h' differs from latest version at 'include/uapi/asm-generic/unistd.h'
diff -u tools/include/uapi/asm-generic/unistd.h include/uapi/asm-generic/unistd.h
Cc: Adrian Hunter <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Link: https://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
To pick up the changes from:
8aa3c927ec10 ("mm/mmap: move common defines to mman-common.h")
22fcea6f85f2 ("mm: move MAP_SYNC to asm-generic/mman-common.h")
0bf5f9492389 ("mm: fix the MAP_UNINITIALIZED flag")
To address the following perf build warnings:
Warning: Kernel ABI header at 'tools/include/uapi/asm-generic/mman-common.h' differs from latest version at 'include/uapi/asm-generic/mman-common.h'
diff -u tools/include/uapi/asm-generic/mman-common.h include/uapi/asm-generic/mman-common.h
Warning: Kernel ABI header at 'tools/include/uapi/asm-generic/mman.h' differs from latest version at 'include/uapi/asm-generic/mman.h'
diff -u tools/include/uapi/asm-generic/mman.h include/uapi/asm-generic/mman.h
That ends up just moving a bit the auto-generated code->string tables:
$ tools/perf/trace/beauty/mmap_flags.sh > before
$ cp include/uapi/asm-generic/mman.h tools/include/uapi/asm-generic/mman.h
$ cp include/uapi/asm-generic/mman-common.h tools/include/uapi/asm-generic/mman-common.h
$ tools/perf/trace/beauty/mmap_flags.sh > after
$ diff -u before after
--- before 2019-07-26 12:45:02.948335904 -0300
+++ after 2019-07-26 12:48:05.342893539 -0300
@@ -4,15 +4,15 @@
[ilog2(0x02) + 1] = "PRIVATE",
[ilog2(0x10) + 1] = "FIXED",
[ilog2(0x20) + 1] = "ANONYMOUS",
+ [ilog2(0x008000) + 1] = "POPULATE",
+ [ilog2(0x010000) + 1] = "NONBLOCK",
+ [ilog2(0x020000) + 1] = "STACK",
+ [ilog2(0x040000) + 1] = "HUGETLB",
+ [ilog2(0x080000) + 1] = "SYNC",
[ilog2(0x100000) + 1] = "FIXED_NOREPLACE",
[ilog2(0x0100) + 1] = "GROWSDOWN",
[ilog2(0x0800) + 1] = "DENYWRITE",
[ilog2(0x1000) + 1] = "EXECUTABLE",
[ilog2(0x2000) + 1] = "LOCKED",
[ilog2(0x4000) + 1] = "NORESERVE",
- [ilog2(0x8000) + 1] = "POPULATE",
- [ilog2(0x10000) + 1] = "NONBLOCK",
- [ilog2(0x20000) + 1] = "STACK",
- [ilog2(0x40000) + 1] = "HUGETLB",
- [ilog2(0x80000) + 1] = "SYNC",
};
$
Cc: Adrian Hunter <[email protected]>
Cc: Aneesh Kumar K.V <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Luis Cláudio Gonçalves <[email protected]>
Cc: Namhyung Kim <[email protected]>
Link: https://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
up clone3 and pidfd_open
05a70a8ec287 ("unistd: protect clone3 via __ARCH_WANT_SYS_CLONE3")
8f3220a80654 ("arch: wire-up clone3() syscall")
7615d9e1780e ("arch: wire-up pidfd_open()")
Silencing the following tools/perf build warnings
Warning: Kernel ABI header at 'tools/include/uapi/asm-generic/unistd.h' differs from latest version at 'include/uapi/asm-generic/unistd.h'
diff -u tools/include/uapi/asm-generic/unistd.h include/uapi/asm-generic/unistd.h
Warning: Kernel ABI header at 'tools/perf/arch/x86/entry/syscalls/syscall_64.tbl' differs from latest version at 'arch/x86/entry/syscalls/syscall_64.tbl'
diff -u tools/perf/arch/x86/entry/syscalls/syscall_64.tbl arch/x86/entry/syscalls/syscall_64.tbl
Now 'perf trace -e pidfd*,clone*' will trace those syscalls as well as the
others with those prefixes.
$ diff -u /tmp/build/perf/arch/x86/include/generated/asm/syscalls_64.c.before /tmp/build/perf/arch/x86/include/generated/asm/syscalls_64.c
--- /tmp/build/perf/arch/x86/include/generated/asm/syscalls_64.c.before 2019-07-26 12:24:55.020944201 -0300
+++ /tmp/build/perf/arch/x86/include/generated/asm/syscalls_64.c 2019-07-26 12:25:03.919047217 -0300
@@ -344,5 +344,7 @@
[431] = "fsconfig",
[432] = "fsmount",
[433] = "fspick",
+ [434] = "pidfd_open",
+ [435] = "clone3",
};
-#define SYSCALLTBL_x86_64_MAX_ID 433
+#define SYSCALLTBL_x86_64_MAX_ID 435
$
Cc: Adrian Hunter <[email protected]>
Cc: Brendan Gregg <[email protected]>
Cc: Christian Brauner <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Luis Cláudio Gonçalves <[email protected]>
Cc: Namhyung Kim <[email protected]>
Link: https://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Alexei Starovoitov says:
====================
pull-request: bpf-next 2019-06-19
The following pull-request contains BPF updates for your *net-next* tree.
The main changes are:
1) new SO_REUSEPORT_DETACH_BPF setsocktopt, from Martin.
2) BTF based map definition, from Andrii.
3) support bpf_map_lookup_elem for xskmap, from Jonathan.
4) bounded loops and scalar precision logic in the verifier, from Alexei.
====================
Signed-off-by: David S. Miller <[email protected]>
|
|
SO_DETACH_REUSEPORT_BPF is needed for the test in the next patch.
It is defined in the socket.h.
Signed-off-by: Martin KaFai Lau <[email protected]>
Reviewed-by: Stanislav Fomichev <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
|
|
fsconfig, fsopen, move_mount and open_tree syscalls
Copy the headers changed by these csets:
d8076bdb56af ("uapi: Wire up the mount API syscalls on non-x86 arches [ver #2]")
9c8ad7a2ff0b ("uapi, x86: Fix the syscall numbering of the mount API syscalls [ver #2]")
cf3cba4a429b ("vfs: syscall: Add fspick() to select a superblock for reconfiguration")
93766fbd2696 ("vfs: syscall: Add fsmount() to create a mount for a superblock")
ecdab150fddb ("vfs: syscall: Add fsconfig() for configuring and managing a context")
24dcb3d90a1f ("vfs: syscall: Add fsopen() to prepare for superblock creation")
2db154b3ea8e ("vfs: syscall: Add move_mount(2) to move mounts around")
a07b20004793 ("vfs: syscall: Add open_tree(2) to reference or clone a mount")
We need to create tables for all the flags argument in the new syscalls,
in followup patches.
This silences these perf build warnings:
Warning: Kernel ABI header at 'tools/include/uapi/linux/mount.h' differs from latest version at 'include/uapi/linux/mount.h'
diff -u tools/include/uapi/linux/mount.h include/uapi/linux/mount.h
Warning: Kernel ABI header at 'tools/perf/arch/x86/entry/syscalls/syscall_64.tbl' differs from latest version at 'arch/x86/entry/syscalls/syscall_64.tbl'
diff -u tools/perf/arch/x86/entry/syscalls/syscall_64.tbl arch/x86/entry/syscalls/syscall_64.tbl
Warning: Kernel ABI header at 'tools/include/uapi/asm-generic/unistd.h' differs from latest version at 'include/uapi/asm-generic/unistd.h'
diff -u tools/include/uapi/asm-generic/unistd.h include/uapi/asm-generic/unistd.h
Cc: Adrian Hunter <[email protected]>
Cc: Al Viro <[email protected]>
Cc: David Howells <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Luis Cláudio Gonçalves <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Wang Nan <[email protected]>
Link: https://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
To pick up the changes introduced in the following csets:
2b188cc1bb85 ("Add io_uring IO interface")
edafccee56ff ("io_uring: add support for pre-mapped user IO buffers")
3eb39f47934f ("signal: add pidfd_send_signal() syscall")
This makes 'perf trace' to become aware of these new syscalls, so that
one can use them like 'perf trace -e ui_uring*,*signal' to do a system
wide strace-like session looking at those syscalls, for instance.
For example:
# perf trace -s io_uring-cp ~acme/isos/RHEL-x86_64-dvd1.iso ~/bla
Summary of events:
io_uring-cp (383), 1208866 events, 100.0%
syscall calls total min avg max stddev
(msec) (msec) (msec) (msec) (%)
-------------- ------ -------- ------ ------- ------- ------
io_uring_enter 605780 2955.615 0.000 0.005 33.804 1.94%
openat 4 459.446 0.004 114.861 459.435 100.00%
munmap 4 0.073 0.009 0.018 0.042 44.03%
mmap 10 0.054 0.002 0.005 0.026 43.24%
brk 28 0.038 0.001 0.001 0.003 7.51%
io_uring_setup 1 0.030 0.030 0.030 0.030 0.00%
mprotect 4 0.014 0.002 0.004 0.005 14.32%
close 5 0.012 0.001 0.002 0.004 28.87%
fstat 3 0.006 0.001 0.002 0.003 35.83%
read 4 0.004 0.001 0.001 0.002 13.58%
access 1 0.003 0.003 0.003 0.003 0.00%
lseek 3 0.002 0.001 0.001 0.001 9.00%
arch_prctl 2 0.002 0.001 0.001 0.001 0.69%
execve 1 0.000 0.000 0.000 0.000 0.00%
#
# perf trace -e io_uring* -s io_uring-cp ~acme/isos/RHEL-x86_64-dvd1.iso ~/bla
Summary of events:
io_uring-cp (390), 1191250 events, 100.0%
syscall calls total min avg max stddev
(msec) (msec) (msec) (msec) (%)
-------------- ------ -------- ------ ------ ------ ------
io_uring_enter 597093 2706.060 0.001 0.005 14.761 1.10%
io_uring_setup 1 0.038 0.038 0.038 0.038 0.00%
#
More work needed to make the tools/perf/examples/bpf/augmented_raw_syscalls.c
BPF program to copy the 'struct io_uring_params' arguments to perf's ring
buffer so that 'perf trace' can use the BTF info put in place by pahole's
conversion of the kernel DWARF and then auto-beautify those arguments.
This patch produces the expected change in the generated syscalls table
for x86_64:
--- /tmp/build/perf/arch/x86/include/generated/asm/syscalls_64.c.before 2019-03-26 13:37:46.679057774 -0300
+++ /tmp/build/perf/arch/x86/include/generated/asm/syscalls_64.c 2019-03-26 13:38:12.755990383 -0300
@@ -334,5 +334,9 @@ static const char *syscalltbl_x86_64[] =
[332] = "statx",
[333] = "io_pgetevents",
[334] = "rseq",
+ [424] = "pidfd_send_signal",
+ [425] = "io_uring_setup",
+ [426] = "io_uring_enter",
+ [427] = "io_uring_register",
};
-#define SYSCALLTBL_x86_64_MAX_ID 334
+#define SYSCALLTBL_x86_64_MAX_ID 427
This silences these perf build warnings:
Warning: Kernel ABI header at 'tools/include/uapi/asm-generic/unistd.h' differs from latest version at 'include/uapi/asm-generic/unistd.h'
diff -u tools/include/uapi/asm-generic/unistd.h include/uapi/asm-generic/unistd.h
Warning: Kernel ABI header at 'tools/perf/arch/x86/entry/syscalls/syscall_64.tbl' differs from latest version at 'arch/x86/entry/syscalls/syscall_64.tbl'
diff -u tools/perf/arch/x86/entry/syscalls/syscall_64.tbl arch/x86/entry/syscalls/syscall_64.tbl
Cc: Adrian Hunter <[email protected]>
Cc: Andrii Nakryiko <[email protected]>
Cc: Christian Brauner <[email protected]>
Cc: Daniel Borkmann <[email protected]>
Cc: Jens Axboe <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Martin KaFai Lau <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Song Liu <[email protected]>
Cc: Yonghong Song <[email protected]>
Link: https://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
To deal with the move of some defines from asm-generic/mmap-common.h to
linux/mman.h done in:
746c9398f5ac ("arch: move common mmap flags to linux/mman.h")
The generated mmap_flags array stays the same:
$ tools/perf/trace/beauty/mmap_flags.sh
static const char *mmap_flags[] = {
[ilog2(0x40) + 1] = "32BIT",
[ilog2(0x01) + 1] = "SHARED",
[ilog2(0x02) + 1] = "PRIVATE",
[ilog2(0x10) + 1] = "FIXED",
[ilog2(0x20) + 1] = "ANONYMOUS",
[ilog2(0x100000) + 1] = "FIXED_NOREPLACE",
[ilog2(0x0100) + 1] = "GROWSDOWN",
[ilog2(0x0800) + 1] = "DENYWRITE",
[ilog2(0x1000) + 1] = "EXECUTABLE",
[ilog2(0x2000) + 1] = "LOCKED",
[ilog2(0x4000) + 1] = "NORESERVE",
[ilog2(0x8000) + 1] = "POPULATE",
[ilog2(0x10000) + 1] = "NONBLOCK",
[ilog2(0x20000) + 1] = "STACK",
[ilog2(0x40000) + 1] = "HUGETLB",
[ilog2(0x80000) + 1] = "SYNC",
};
$
And to have the system's sys/mman.h find the definition of MAP_SHARED
and MAP_PRIVATE, make sure they are defined in the tools/ mman-common.h
in a way that keeps it the same as the kernel's, need for keeping the
Android's NDK cross build working.
This silences these perf build warnings:
Warning: Kernel ABI header at 'tools/include/uapi/asm-generic/mman-common.h' differs from latest version at 'include/uapi/asm-generic/mman-common.h'
diff -u tools/include/uapi/asm-generic/mman-common.h include/uapi/asm-generic/mman-common.h
Warning: Kernel ABI header at 'tools/include/uapi/linux/mman.h' differs from latest version at 'include/uapi/linux/mman.h'
diff -u tools/include/uapi/linux/mman.h include/uapi/linux/mman.h
Cc: Adrian Hunter <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Michael S. Tsirkin <[email protected]>
Cc: Namhyung Kim <[email protected]>
Link: https://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
To get the changes in:
c8ce48f06503 ("asm-generic: Make time32 syscall numbers optional")
Silencing these tools/perf build warnings:
Warning: Kernel ABI header at 'tools/arch/arm64/include/uapi/asm/unistd.h' differs from latest version at 'arch/arm64/include/uapi/asm/unistd.h'
diff -u tools/arch/arm64/include/uapi/asm/unistd.h arch/arm64/include/uapi/asm/unistd.h
Warning: Kernel ABI header at 'tools/include/uapi/asm-generic/unistd.h' differs from latest version at 'include/uapi/asm-generic/unistd.h'
diff -u tools/include/uapi/asm-generic/unistd.h include/uapi/asm-generic/unistd.h
Test built it under the ubuntu:14.04.4-x-linaro-arm64 cross build
environment and looked at the syscall table at
/tmp/build/perf/arch/arm64/include/generated/asm/syscalls.c, looks ok.
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Cc: Hendrik Brueckner <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kim Phillips <[email protected]>
Cc: Michael Ellerman <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Ravi Bangoria <[email protected]>
Cc: Thomas Richter <[email protected]>
Link: https://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
To get the changes in:
b7d624ab4312 asm-generic: unistd.h: fixup broken macro include.
4e21565b7fd4 asm-generic: add kexec_file_load system call to unistd.h
With this the 'kexec_file_load' syscall will be added to arm64's syscall
table and will appear on the output of 'perf trace' on that platform.
This silences this tools/perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/asm-generic/unistd.h' differs from latest version at 'include/uapi/asm-generic/unistd.h'
diff -u tools/include/uapi/asm-generic/unistd.h include/uapi/asm-generic/unistd.h
Cc: Adrian Hunter <[email protected]>
Cc: AKASHI Takahiro <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Cc: Guo Ren <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Will Deacon <[email protected]>
Link: https://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
To get the change in:
b7d624ab4312 ("asm-generic: unistd.h: fixup broken macro include.")
That doesn't imply in any changes in the tools.
This silences the following perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/asm-generic/unistd.h' differs from latest version at 'include/uapi/asm-generic/unistd.h'
diff -u tools/include/uapi/asm-generic/unistd.h include/uapi/asm-generic/unistd.h
Cc: Adrian Hunter <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Cc: Guo Ren <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Link: https://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
To pick up the changes in:
ad8c0eaa0a41 ("tty/serial_core: add ISO7816 infrastructure")
That is a change that imply a change to be made in tools/perf/trace/beauty/ioctl.c to
make 'perf trace' ioctl syscall argument beautifier to support these new
commands: TIOCGISO7816 and TIOCSISO7816.
This is not yet done automatically by a script like is done for some
other headers, for instance:
$ tools/perf/trace/beauty/drm_ioctl.sh | head
#ifndef DRM_COMMAND_BASE
#define DRM_COMMAND_BASE 0x40
#endif
static const char *drm_ioctl_cmds[] = {
[0x00] = "VERSION",
[0x01] = "GET_UNIQUE",
[0x02] = "GET_MAGIC",
[0x03] = "IRQ_BUSID",
[0x04] = "GET_MAP",
[0x05] = "GET_CLIENT",
$
So we will need to change tools/perf/trace/beauty/ioctl.c in a follow up
patch until we switch to a generator script.
Cc: Adrian Hunter <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Nicolas Ferre <[email protected]>
Cc: Wang Nan <[email protected]>
Link: https://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
To get the changes in:
82b355d161c9 ("y2038: Remove newstat family from default syscall set")
Which will make the syscall table used by 'perf trace' for arm64 to be
updated from the changes in that patch.
This silences these perf build warnings:
Warning: Kernel ABI header at 'tools/arch/arm64/include/uapi/asm/unistd.h' differs from latest version at 'arch/arm64/include/uapi/asm/unistd.h'
diff -u tools/arch/arm64/include/uapi/asm/unistd.h arch/arm64/include/uapi/asm/unistd.h
Warning: Kernel ABI header at 'tools/include/uapi/asm-generic/unistd.h' differs from latest version at 'include/uapi/asm-generic/unistd.h'
diff -u tools/include/uapi/asm-generic/unistd.h include/uapi/asm-generic/unistd.h
Cc: Kim Phillips <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Cc: Geert Uytterhoeven <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Link: https://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
To get the changes in:
db7a2d1809a5 ("asm-generic: unistd.h: Wire up sys_rseq")
That wires up the new 'rsec' system call, which will automagically
support that syscall in the syscall table used by 'perf trace' on
arm/arm64.
This cures the following warning during perf's build:
Warning: Kernel ABI header at 'tools/include/uapi/asm-generic/unistd.h' differs from latest version at 'include/uapi/asm-generic/unistd.h'
diff -u tools/include/uapi/asm-generic/unistd.h include/uapi/asm-generic/unistd.h
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Hendrik Brueckner <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kim Phillips <[email protected]>
Cc: Mathieu Desnoyers <[email protected]>
Cc: Michael Ellerman <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Ravi Bangoria <[email protected]>
Cc: Thomas Richter <[email protected]>
Cc: Wang Nan <[email protected]>
Cc: Will Deacon <[email protected]>
Link: https://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Will be used for generating the syscall id/string translation table.
The arm64 unistd.h file simply #includes the asm-generic/unistd.h, so,
since we will want to know whether either change, we grab both:
arch/arm64/include/uapi/asm/unistd.h
and
include/uapi/asm-generic/unistd.h
Signed-off-by: Kim Phillips <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Hendrik Brueckner <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Michael Ellerman <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Ravi Bangoria <[email protected]>
Cc: Thomas Richter <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Sync the following tooling headers with the latest kernel version:
tools/arch/arm/include/uapi/asm/kvm.h
- New ABI: KVM_REG_ARM_*
tools/arch/x86/include/asm/required-features.h
- Removal of NEED_LA57 dependency
tools/arch/x86/include/uapi/asm/kvm.h
- New KVM ABI: KVM_SYNC_X86_*
tools/include/uapi/asm-generic/mman-common.h
- New ABI: MAP_FIXED_NOREPLACE flag
tools/include/uapi/linux/bpf.h
- New ABI: BPF_F_SEQ_NUMBER functions
tools/include/uapi/linux/if_link.h
- New ABI: IFLA tun and rmnet support
tools/include/uapi/linux/kvm.h
- New ABI: hyperv eventfd and CONN_ID_MASK support plus header cleanups
tools/include/uapi/sound/asound.h
- New ABI: SNDRV_PCM_FORMAT_FIRST PCM format specifier
tools/perf/arch/x86/entry/syscalls/syscall_64.tbl
- The x86 system call table description changed due to the ptregs changes and the renames, in:
d5a00528b58c: syscalls/core, syscalls/x86: Rename struct pt_regs-based sys_*() to __x64_sys_*()
5ac9efa3c50d: syscalls/core, syscalls/x86: Clean up compat syscall stub naming convention
ebeb8c82ffaf: syscalls/x86: Use 'struct pt_regs' based syscall calling for IA32_EMULATION and x32
Also fix the x86 syscall table warning:
-Warning: Kernel ABI header at 'tools/arch/x86/entry/syscalls/syscall_64.tbl' differs from latest version at 'arch/x86/entry/syscalls/syscall_64.tbl'
+Warning: Kernel ABI header at 'tools/perf/arch/x86/entry/syscalls/syscall_64.tbl' differs from latest version at 'arch/x86/entry/syscalls/syscall_64.tbl'
None of these changes impact existing tooling code, so we only have to copy the kernel version.
Signed-off-by: Ingo Molnar <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Potapenko <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Alexei Starovoitov <[email protected]>
Cc: Alexey Budankov <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Andrey Ryabinin <[email protected]>
Cc: Andy Lutomirski <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Cc: Brian Robbins <[email protected]>
Cc: Clark Williams <[email protected]>
Cc: Daniel Borkmann <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Dmitriy Vyukov <[email protected]> <[email protected]>
Cc: Heiko Carstens <[email protected]>
Cc: Hendrik Brueckner <[email protected]>
Cc: Jesper Dangaard Brouer <[email protected]>
Cc: Jin Yao <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Josh Poimboeuf <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Kim Phillips <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Li Zhijian <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Martin Liška <[email protected]>
Cc: Martin Schwidefsky <[email protected]>
Cc: Matthias Kaehlcke <[email protected]>
Cc: Miguel Bernal Marin <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Naveen N. Rao <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Ravi Bangoria <[email protected]>
Cc: Sandipan Das <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: Stephen Rothwell <[email protected]>
Cc: Takuya Yamamoto <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Thomas Richter <[email protected]>
Cc: Wang Nan <[email protected]>
Cc: William Cohen <[email protected]>
Cc: Yonghong Song <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
This is a pre-req to generate an architecture specific mapping of errno
numbers to their names. This errno mapping can be used by perf trace to
support cross-architecture trace reports and to get rid of the
audit-libs dependency.
Signed-off-by: Hendrik Brueckner <[email protected]>
Reviewed-by: Thomas Richter <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Michael Petlan <[email protected]>
Cc: [email protected]
LPU-Reference: [email protected]
Link: https://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|