| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Add map parameter to prog load which will allow reuse of existing
maps instead of creating new ones.
We need feature detection and compat code for reallocarray, since
it's not available in many libc versions.
Signed-off-by: Jakub Kicinski <[email protected]>
Reviewed-by: Quentin Monnet <[email protected]>
Acked-by: Alexei Starovoitov <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
|
|
Sometimes program section names don't match with libbpf's expectation.
In particular XDP's default section names differ between libbpf and
iproute2. Allow users to pass program type on command line. Name
the types like the libbpf expected section names.
Signed-off-by: Jakub Kicinski <[email protected]>
Reviewed-by: Quentin Monnet <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
|
|
Extend the bpftool prog load command to also accept "dev"
parameter, which will allow us to load programs onto devices.
Signed-off-by: Jakub Kicinski <[email protected]>
Reviewed-by: Quentin Monnet <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
|
|
This commit adds a bash completion to the bpftool cgroup tree
command.
Signed-off-by: Roman Gushchin <[email protected]>
Cc: Jakub Kicinski <[email protected]>
Cc: Quentin Monnet <[email protected]>
Cc: Daniel Borkmann <[email protected]>
Cc: Alexei Starovoitov <[email protected]>
Acked-by: Jakub Kicinski <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
|
|
Remove options (in getopt() sense, i.e. starting with a dash like
-n or --NAME) while parsing arguments for bash completions. This
allows us to refer to position-dependent parameters better, and
complete options at any point.
Signed-off-by: Jakub Kicinski <[email protected]>
Reviewed-by: Quentin Monnet <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
|
|
--bpffs is not suggested by bash completions.
Signed-off-by: Jakub Kicinski <[email protected]>
Reviewed-by: Quentin Monnet <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
|
|
Add support for recently added BPF_CGROUP_UDP4_SENDMSG and
BPF_CGROUP_UDP6_SENDMSG attach types to bpftool, update documentation
and bash completion.
Signed-off-by: Andrey Ignatov <[email protected]>
Reviewed-by: Jakub Kicinski <[email protected]>
Acked-by: Song Liu <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
|
|
The new command "bpftool perf [show | list]" will traverse
all processes under /proc, and if any fd is associated
with a perf event, it will print out related perf event
information. Documentation is also added.
Below is an example to show the results using bcc commands.
Running the following 4 bcc commands:
kprobe: trace.py '__x64_sys_nanosleep'
kretprobe: trace.py 'r::__x64_sys_nanosleep'
tracepoint: trace.py 't:syscalls:sys_enter_nanosleep'
uprobe: trace.py 'p:/home/yhs/a.out:main'
The bpftool command line and result:
$ bpftool perf
pid 21711 fd 5: prog_id 5 kprobe func __x64_sys_write offset 0
pid 21765 fd 5: prog_id 7 kretprobe func __x64_sys_nanosleep offset 0
pid 21767 fd 5: prog_id 8 tracepoint sys_enter_nanosleep
pid 21800 fd 5: prog_id 9 uprobe filename /home/yhs/a.out offset 1159
$ bpftool -j perf
[{"pid":21711,"fd":5,"prog_id":5,"fd_type":"kprobe","func":"__x64_sys_write","offset":0}, \
{"pid":21765,"fd":5,"prog_id":7,"fd_type":"kretprobe","func":"__x64_sys_nanosleep","offset":0}, \
{"pid":21767,"fd":5,"prog_id":8,"fd_type":"tracepoint","tracepoint":"sys_enter_nanosleep"}, \
{"pid":21800,"fd":5,"prog_id":9,"fd_type":"uprobe","filename":"/home/yhs/a.out","offset":1159}]
$ bpftool prog
5: kprobe name probe___x64_sys tag e495a0c82f2c7a8d gpl
loaded_at 2018-05-15T04:46:37-0700 uid 0
xlated 200B not jited memlock 4096B map_ids 4
7: kprobe name probe___x64_sys tag f2fdee479a503abf gpl
loaded_at 2018-05-15T04:48:32-0700 uid 0
xlated 200B not jited memlock 4096B map_ids 7
8: tracepoint name tracepoint__sys tag 5390badef2395fcf gpl
loaded_at 2018-05-15T04:48:48-0700 uid 0
xlated 200B not jited memlock 4096B map_ids 8
9: kprobe name probe_main_1 tag 0a87bdc2e2953b6d gpl
loaded_at 2018-05-15T04:49:52-0700 uid 0
xlated 200B not jited memlock 4096B map_ids 9
$ ps ax | grep "python ./trace.py"
21711 pts/0 T 0:03 python ./trace.py __x64_sys_write
21765 pts/0 S+ 0:00 python ./trace.py r::__x64_sys_nanosleep
21767 pts/2 S+ 0:00 python ./trace.py t:syscalls:sys_enter_nanosleep
21800 pts/3 S+ 0:00 python ./trace.py p:/home/yhs/a.out:main
22374 pts/1 S+ 0:00 grep --color=auto python ./trace.py
Reviewed-by: Jakub Kicinski <[email protected]>
Signed-off-by: Yonghong Song <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Users of BPF sooner or later discover perf_event_output() helpers
and BPF_MAP_TYPE_PERF_EVENT_ARRAY. Dumping this array type is
not possible, however, we can add simple reading of perf events.
Create a new event_pipe subcommand for maps, this sub command
will only work with BPF_MAP_TYPE_PERF_EVENT_ARRAY maps.
Parts of the code from samples/bpf/trace_output_user.c.
Signed-off-by: Jakub Kicinski <[email protected]>
Reviewed-by: Quentin Monnet <[email protected]>
Acked-by: Alexei Starovoitov <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
|
|
bpftool uses hexadecimal values when it dumps map contents:
# bpftool map dump id 1337
key: ff 13 37 ff value: a1 b2 c3 d4 ff ff ff ff
Found 1 element
In order to lookup or update values with bpftool, the natural reflex is
then to copy and paste the values to the command line, and to try to run
something like:
# bpftool map update id 1337 key ff 13 37 ff \
value 00 00 00 00 00 00 1a 2b
Error: error parsing byte: ff
bpftool complains, because it uses strtoul() with a 0 base to parse the
bytes, and that without a "0x" prefix, the bytes are considered as
decimal values (or even octal if they start with "0").
To feed hexadecimal values instead, one needs to add "0x" prefixes
everywhere necessary:
# bpftool map update id 1337 key 0xff 0x13 0x37 0xff \
value 0 0 0 0 0 0 0x1a 0x2b
To make it easier to use hexadecimal values, add an optional "hex"
keyword to put after "key" or "value" to tell bpftool to consider the
digits as hexadecimal. We can now do:
# bpftool map update id 1337 key hex ff 13 37 ff \
value hex 0 0 0 0 0 0 1a 2b
Without the "hex" keyword, the bytes are still parsed according to
normal integer notation (decimal if no prefix, or hexadecimal or octal
if "0x" or "0" prefix is used, respectively).
The patch also add related documentation and bash completion for the
"hex" keyword.
Suggested-by: Daniel Borkmann <[email protected]>
Suggested-by: David Beckett <[email protected]>
Signed-off-by: Quentin Monnet <[email protected]>
Acked-by: Jakub Kicinski <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
|
|
Add recently added prog types to `bpftool prog` and attach types to
`bpftool cgroup`.
Update bpftool documentation and bash completion appropriately.
Signed-off-by: Andrey Ignatov <[email protected]>
Acked-by: Jakub Kicinski <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
|
|
Add bash completion for the "visual" keyword used for dumping the CFG of
eBPF programs with bpftool. Make sure we only complete with this keyword
when we dump "xlated" (and not "jited") instructions.
Acked-by: Jiong Wang <[email protected]>
Signed-off-by: Quentin Monnet <[email protected]>
Acked-by: Jakub Kicinski <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Add bash completion for "bpftool cgroup" command family. While at it,
also fix the formatting of some keywords in the man page for cgroups.
Fixes: 5ccda64d38cc ("bpftool: implement cgroup bpf operations")
Signed-off-by: Quentin Monnet <[email protected]>
Reviewed-by: Jakub Kicinski <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
|
|
Add bash completion for bpftool command `prog load`. Completion for this
command is easy, as it only takes existing file paths as arguments.
Fixes: 49a086c201a9 ("bpftool: implement prog load command")
Signed-off-by: Quentin Monnet <[email protected]>
Reviewed-by: Jakub Kicinski <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
|
|
iproute2 seems to accept show and list as aliases.
Let's do the same thing, and by allowing both bring
cgroup syntax back in line with maps and progs.
Signed-off-by: Jakub Kicinski <[email protected]>
Reviewed-by: Quentin Monnet <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
|
|
Add a completion file for bash. The completion function runs bpftool
when needed, making it smart enough to help users complete ids or tags
for eBPF programs and maps currently on the system.
Update Makefile to install completion file to
/usr/share/bash-completion/completions when running `make install`.
Emacs file mode and (at the end) Vim modeline have been added, to keep
the style in use for most existing bash completion files. In this, it
differs from tools/perf/perf-completion.sh, which seems to be the only
other completion file among the kernel sources repository. This is also
valid for indent style: 4-space indents, as in other completion files.
Signed-off-by: Quentin Monnet <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|