aboutsummaryrefslogtreecommitdiff
path: root/tools/arch/x86
AgeCommit message (Collapse)AuthorFilesLines
2021-03-17tools/insn: Restore the relative include paths for cross buildingBorislav Petkov1-3/+3
Building perf on ppc causes: In file included from util/intel-pt-decoder/intel-pt-insn-decoder.c:15: util/intel-pt-decoder/../../../arch/x86/lib/insn.c:14:10: fatal error: asm/inat.h: No such file or directory 14 | #include <asm/inat.h> /*__ignore_sync_check__ */ | ^~~~~~~~~~~~ Restore the relative include paths so that the compiler can find the headers. Fixes: 93281c4a9657 ("x86/insn: Add an insn_decode() API") Reported-by: Ian Rogers <[email protected]> Reported-by: Stephen Rothwell <[email protected]> Signed-off-by: Borislav Petkov <[email protected]> Tested-by: Ian Rogers <[email protected]> Tested-by: Stephen Rothwell <[email protected]> Link: https://lkml.kernel.org/r/[email protected]
2021-03-15objtool/x86: Use asm/nops.hPeter Zijlstra1-0/+81
Since the kernel will rely on a single canonical set of NOPs, make sure objtool uses the exact same ones. Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Signed-off-by: Borislav Petkov <[email protected]> Link: https://lkml.kernel.org/r/[email protected]
2021-03-15tools/x86/kcpuid: Add AMD Secure Encryption leafBorislav Petkov1-0/+10
Add the 0x8000001f leaf's fields. Signed-off-by: Borislav Petkov <[email protected]> Acked-by: Feng Tang <[email protected]> Link: https://lkml.kernel.org/r/[email protected]
2021-03-15x86/insn: Make insn_complete() staticBorislav Petkov2-7/+7
... and move it above the only place it is used. Signed-off-by: Borislav Petkov <[email protected]> Link: https://lkml.kernel.org/r/[email protected]
2021-03-15x86/insn: Remove kernel_insn_init()Borislav Petkov1-11/+0
Now that it is not needed anymore, drop it. Signed-off-by: Borislav Petkov <[email protected]> Link: https://lkml.kernel.org/r/[email protected]
2021-03-15x86/insn: Add an insn_decode() APIBorislav Petkov2-55/+191
Users of the instruction decoder should use this to decode instruction bytes. For that, have insn*() helpers return an int value to denote success/failure. When there's an error fetching the next insn byte and the insn falls short, return -ENODATA to denote that. While at it, make insn_get_opcode() more stricter as to whether what has seen so far is a valid insn and if not. Copy linux/kconfig.h for the tools-version of the decoder so that it can use IS_ENABLED(). Also, cast the INSN_MODE_KERN dummy define value to (enum insn_mode) for tools use of the decoder because perf tool builds with -Werror and errors out with -Werror=sign-compare otherwise. Signed-off-by: Borislav Petkov <[email protected]> Acked-by: Masami Hiramatsu <[email protected]> Link: https://lkml.kernel.org/r/[email protected]
2021-03-15x86/insn: Add a __ignore_sync_check__ markerBorislav Petkov4-6/+6
Add an explicit __ignore_sync_check__ marker which will be used to mark lines which are supposed to be ignored by file synchronization check scripts, its advantage being that it explicitly denotes such lines in the code. Signed-off-by: Borislav Petkov <[email protected]> Reviewed-by: Masami Hiramatsu <[email protected]> Link: https://lkml.kernel.org/r/[email protected]
2021-03-15x86/insn: Add @buf_len param to insn_init() kernel-doc commentBorislav Petkov1-0/+1
It wasn't documented so add it. No functional changes. Signed-off-by: Borislav Petkov <[email protected]> Acked-by: Masami Hiramatsu <[email protected]> Link: https://lkml.kernel.org/r/[email protected]
2021-03-08tools/x86: Add a kcpuid tool to show raw CPU featuresFeng Tang3-0/+1059
End users frequently want to know what features their processor supports, independent of what the kernel supports. /proc/cpuinfo is great. It is omnipresent and since it is provided by the kernel it is always as up to date as the kernel. But, it could be ambiguous about processor features which can be disabled by the kernel at boot-time or compile-time. There are some user space tools showing more raw features, but they are not bound with kernel, and go with distros. Many end users are still using old distros with new kernels (upgraded by themselves), and may not upgrade the distros only to get a newer tool. So here arise the need for a new tool, which * shows raw CPU features read from the CPUID instruction * will be easier to update compared to existing userspace tooling (perhaps distributed like perf) * inherits "modern" kernel development process, in contrast to some of the existing userspace CPUID tools which are still being developed without git and distributed in tarballs from non-https sites. * Can produce output consistent with /proc/cpuinfo to make comparison easier. The CPUID leaf definitions are kept in an .csv file which allows for updating only that file to add support for new feature leafs. This is based on prototype code from Borislav Petkov (http://sr71.net/~dave/intel/stupid-cpuid.c). [ bp: - Massage, add #define _GNU_SOURCE to fix implicit declaration of function ‘strcasestr' warning - remove superfluous newlines - fallback to cpuid.csv in the current dir if none found - fix typos - move comments over the lines instead of sideways. ] Originally-from: Borislav Petkov <[email protected]> Suggested-by: Dave Hansen <[email protected]> Suggested-by: Borislav Petkov <[email protected]> Signed-off-by: Feng Tang <[email protected]> Signed-off-by: Borislav Petkov <[email protected]> Link: https://lkml.kernel.org/r/[email protected]
2021-03-08x86: Remove duplicate TSC DEADLINE MSR definitionsDave Hansen1-2/+0
There are two definitions for the TSC deadline MSR in msr-index.h, one with an underscore and one without. Axe one of them and move all the references over to the other one. [ bp: Fixup the MSR define in handle_fastpath_set_msr_irqoff() too. ] Signed-off-by: Dave Hansen <[email protected]> Signed-off-by: Borislav Petkov <[email protected]> Link: https://lkml.kernel.org/r/[email protected]
2021-03-06tools headers UAPI: Sync KVM's kvm.h and vmx.h headers with the kernel sourcesArnaldo Carvalho de Melo2-1/+4
To pick the changes in: fe6b6bc802b40081 ("KVM: VMX: Enable bus lock VM exit") That makes 'perf kvm-stat' aware of this new BUS_LOCK exit reason, thus addressing the following perf build warning: Warning: Kernel ABI header at 'tools/arch/x86/include/uapi/asm/vmx.h' differs from latest version at 'arch/x86/include/uapi/asm/vmx.h' diff -u tools/arch/x86/include/uapi/asm/vmx.h arch/x86/include/uapi/asm/vmx.h Cc: Chenyi Qiang <[email protected]> Cc: Paolo Bonzini <[email protected]> Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2021-03-06tools headers cpufeatures: Sync with the kernel sourcesArnaldo Carvalho de Melo1-6/+13
To pick the changes from: 3b9c723ed7cfa4e1 ("KVM: SVM: Add support for SVM instruction address check change") b85a0425d8056f3b ("Enumerate AVX Vector Neural Network instructions") fb35d30fe5b06cc2 ("x86/cpufeatures: Assign dedicated feature word for CPUID_0x8000001F[EAX]") This only causes these perf files to be rebuilt: CC /tmp/build/perf/bench/mem-memcpy-x86-64-asm.o CC /tmp/build/perf/bench/mem-memset-x86-64-asm.o And addresses this perf build warning: Warning: Kernel ABI header at 'tools/arch/x86/include/asm/cpufeatures.h' differs from latest version at 'arch/x86/include/asm/cpufeatures.h' diff -u tools/arch/x86/include/asm/cpufeatures.h arch/x86/include/asm/cpufeatures.h Cc: Borislav Petkov <[email protected]> Cc: Kyung Min Park <[email protected]> Cc: Paolo Bonzini <[email protected]> Cc: Sean Christopherson <[email protected]> Cc: Wei Huang <[email protected]> Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2021-02-23Merge tag 'objtool-core-2021-02-23' of ↵Linus Torvalds3-63/+111
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull objtool updates from Thomas Gleixner: - Make objtool work for big-endian cross compiles - Make stack tracking via stack pointer memory operations match push/pop semantics to prepare for architectures w/o PUSH/POP instructions. - Add support for analyzing alternatives - Improve retpoline detection and handling - Improve assembly code coverage on x86 - Provide support for inlined stack switching * tag 'objtool-core-2021-02-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (33 commits) objtool: Support stack-swizzle objtool,x86: Additionally decode: mov %rsp, (%reg) x86/unwind/orc: Change REG_SP_INDIRECT x86/power: Support objtool validation in hibernate_asm_64.S x86/power: Move restore_registers() to top of the file x86/power: Annotate indirect branches as safe x86/acpi: Support objtool validation in wakeup_64.S x86/acpi: Annotate indirect branch as safe x86/ftrace: Support objtool vmlinux.o validation in ftrace_64.S x86/xen/pvh: Annotate indirect branch as safe x86/xen: Support objtool vmlinux.o validation in xen-head.S x86/xen: Support objtool validation in xen-asm.S objtool: Add xen_start_kernel() to noreturn list objtool: Combine UNWIND_HINT_RET_OFFSET and UNWIND_HINT_FUNC objtool: Add asm version of STACK_FRAME_NON_STANDARD objtool: Assume only ELF functions do sibling calls x86/ftrace: Add UNWIND_HINT_FUNC annotation for ftrace_stub objtool: Support retpoline jump detection for vmlinux.o objtool: Fix ".cold" section suffix check for newer versions of GCC objtool: Fix retpoline detection in asm code ...
2021-01-28x86/cpufeatures: Assign dedicated feature word for CPUID_0x8000001F[EAX]Sean Christopherson2-2/+4
Collect the scattered SME/SEV related feature flags into a dedicated word. There are now five recognized features in CPUID.0x8000001F.EAX, with at least one more on the horizon (SEV-SNP). Using a dedicated word allows KVM to use its automagic CPUID adjustment logic when reporting the set of supported features to userspace. No functional change intended. Signed-off-by: Sean Christopherson <[email protected]> Signed-off-by: Borislav Petkov <[email protected]> Reviewed-by: Brijesh Singh <[email protected]> Link: https://lkml.kernel.org/r/[email protected]
2021-01-13x86/insn: Fix vector instruction decoding on big endian cross-compilesVasily Gorbik2-9/+21
Running instruction decoder posttest on an s390 host with an x86 target with allyesconfig shows errors. Instructions used in a couple of kernel objects could not be correctly decoded on big endian system. insn_decoder_test: warning: objdump says 6 bytes, but insn_get_length() says 5 insn_decoder_test: warning: Found an x86 instruction decoder bug, please report this. insn_decoder_test: warning: ffffffff831eb4e1: 62 d1 fd 48 7f 04 24 vmovdqa64 %zmm0,(%r12) insn_decoder_test: warning: objdump says 7 bytes, but insn_get_length() says 6 insn_decoder_test: warning: Found an x86 instruction decoder bug, please report this. insn_decoder_test: warning: ffffffff831eb4e8: 62 51 fd 48 7f 44 24 01 vmovdqa64 %zmm8,0x40(%r12) insn_decoder_test: warning: objdump says 8 bytes, but insn_get_length() says 6 This is because in a few places instruction field bytes are set directly with further usage of "value". To address that introduce and use a insn_set_byte() helper, which correctly updates "value" on big endian systems. Signed-off-by: Vasily Gorbik <[email protected]> Acked-by: Masami Hiramatsu <[email protected]> Signed-off-by: Josh Poimboeuf <[email protected]>
2021-01-13objtool: Fix x86 orc generation on big endian cross-compilesVasily Gorbik1-0/+10
Correct objtool orc generation endianness problems to enable fully functional x86 cross-compiles on big endian hardware. Introduce bswap_if_needed() macro, which does a byte swap if target endianness doesn't match the host, i.e. cross-compilation for little endian on big endian and vice versa. The macro is used for conversion of multi-byte values which are read from / about to be written to a target native endianness ELF file. Signed-off-by: Vasily Gorbik <[email protected]> Acked-by: Peter Zijlstra (Intel) <[email protected]> Acked-by: Masami Hiramatsu <[email protected]> Signed-off-by: Josh Poimboeuf <[email protected]>
2021-01-13x86/insn: Support big endian cross-compilesMartin Schwidefsky2-54/+80
The x86 instruction decoder code is shared across the kernel source and the tools. Currently objtool seems to be the only tool from build tools needed which breaks x86 cross-compilation on big endian systems. Make the x86 instruction decoder build host endianness agnostic to support x86 cross-compilation and enable objtool to implement endianness awareness for big endian architectures support. Signed-off-by: Martin Schwidefsky <[email protected]> Co-developed-by: Vasily Gorbik <[email protected]> Signed-off-by: Vasily Gorbik <[email protected]> Acked-by: Peter Zijlstra (Intel) <[email protected]> Acked-by: Masami Hiramatsu <[email protected]> Signed-off-by: Josh Poimboeuf <[email protected]>
2020-12-24tools headers UAPI: Synch KVM's svm.h header with the kernelArnaldo Carvalho de Melo1-0/+28
To pick up the changes from: d1949b93c60504b3 ("KVM: SVM: Add support for CR8 write traps for an SEV-ES guest") 5b51cb13160ae0ba ("KVM: SVM: Add support for CR4 write traps for an SEV-ES guest") f27ad38aac23263c ("KVM: SVM: Add support for CR0 write traps for an SEV-ES guest") 2985afbcdbb1957a ("KVM: SVM: Add support for EFER write traps for an SEV-ES guest") 291bd20d5d88814a ("KVM: SVM: Add initial support for a VMGEXIT VMEXIT") Picking these new SVM exit reasons: + { SVM_EXIT_EFER_WRITE_TRAP, "write_efer_trap" }, \ + { SVM_EXIT_CR0_WRITE_TRAP, "write_cr0_trap" }, \ + { SVM_EXIT_CR4_WRITE_TRAP, "write_cr4_trap" }, \ + { SVM_EXIT_CR8_WRITE_TRAP, "write_cr8_trap" }, \ + { SVM_EXIT_VMGEXIT, "vmgexit" }, \ + { SVM_VMGEXIT_MMIO_READ, "vmgexit_mmio_read" }, \ + { SVM_VMGEXIT_MMIO_WRITE, "vmgexit_mmio_write" }, \ + { SVM_VMGEXIT_NMI_COMPLETE, "vmgexit_nmi_complete" }, \ + { SVM_VMGEXIT_AP_HLT_LOOP, "vmgexit_ap_hlt_loop" }, \ + { SVM_VMGEXIT_AP_JUMP_TABLE, "vmgexit_ap_jump_table" }, \ And address this perf build warning: Warning: Kernel ABI header at 'tools/arch/x86/include/uapi/asm/svm.h' differs from latest version at 'arch/x86/include/uapi/asm/svm.h' diff -u tools/arch/x86/include/uapi/asm/svm.h arch/x86/include/uapi/asm/svm.h Cc: Adrian Hunter <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Paolo Bonzini <[email protected]> Cc: Tom Lendacky <[email protected]> Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-12-24tools headers UAPI: Sync KVM's vmx.h header with the kernel sourcesArnaldo Carvalho de Melo1-0/+2
To pick the changes in: bf0cd88ce363a2de ("KVM: x86: emulate wait-for-SIPI and SIPI-VMExit") That makes 'perf kvm-stat' aware of this new SIPI_SIGNAL exit reason, thus addressing the following perf build warning: Warning: Kernel ABI header at 'tools/arch/x86/include/uapi/asm/vmx.h' differs from latest version at 'arch/x86/include/uapi/asm/vmx.h' diff -u tools/arch/x86/include/uapi/asm/vmx.h arch/x86/include/uapi/asm/vmx.h Cc: Adrian Hunter <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Paolo Bonzini <[email protected]> Cc: Yadong Qi <[email protected]> Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-12-24tools headers UAPI: Sync kvm.h headers with the kernel sourcesArnaldo Carvalho de Melo1-0/+1
To pick the changes in: fb04a1eddb1a65b6 ("KVM: X86: Implement ring-based dirty memory tracking") That result in these change in tooling: $ tools/perf/trace/beauty/kvm_ioctl.sh > before $ cp include/uapi/linux/kvm.h tools/include/uapi/linux/kvm.h $ cp arch/x86/include/uapi/asm/kvm.h tools/arch/x86/include/uapi/asm/kvm.h $ tools/perf/trace/beauty/kvm_ioctl.sh > after $ diff -u before after --- before 2020-12-21 11:55:45.229737066 -0300 +++ after 2020-12-21 11:55:56.379983393 -0300 @@ -90,6 +90,7 @@ [0xc0] = "CLEAR_DIRTY_LOG", [0xc1] = "GET_SUPPORTED_HV_CPUID", [0xc6] = "X86_SET_MSR_FILTER", + [0xc7] = "RESET_DIRTY_RINGS", [0xe0] = "CREATE_DEVICE", [0xe1] = "SET_DEVICE_ATTR", [0xe2] = "GET_DEVICE_ATTR", $ Now one can use that string in filters when tracing ioctls, etc. And silences this perf build warning: Warning: Kernel ABI header at 'tools/include/uapi/linux/kvm.h' differs from latest version at 'include/uapi/linux/kvm.h' diff -u tools/include/uapi/linux/kvm.h include/uapi/linux/kvm.h Warning: Kernel ABI header at 'tools/arch/x86/include/uapi/asm/kvm.h' differs from latest version at 'arch/x86/include/uapi/asm/kvm.h' diff -u tools/arch/x86/include/uapi/asm/kvm.h arch/x86/include/uapi/asm/kvm.h Cc: Adrian Hunter <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Paolo Bonzini <[email protected]> Cc: Peter Xu <[email protected]> Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-12-24tools arch x86: Sync the msr-index.h copy with the kernel sourcesArnaldo Carvalho de Melo1-0/+1
To pick up the changes in: Fixes: 69372cf01290b958 ("x86/cpu: Add VM page flush MSR availablility as a CPUID feature") That cause these changes in tooling: $ tools/perf/trace/beauty/tracepoints/x86_msr.sh > before $ cp arch/x86/include/asm/msr-index.h tools/arch/x86/include/asm/msr-index.h $ tools/perf/trace/beauty/tracepoints/x86_msr.sh > after $ diff -u before after --- before 2020-12-21 09:09:05.593005003 -0300 +++ after 2020-12-21 09:12:48.436994802 -0300 @@ -21,7 +21,7 @@ [0x0000004f] = "PPIN", [0x00000060] = "LBR_CORE_TO", [0x00000079] = "IA32_UCODE_WRITE", - [0x0000008b] = "IA32_UCODE_REV", + [0x0000008b] = "AMD64_PATCH_LEVEL", [0x0000008C] = "IA32_SGXLEPUBKEYHASH0", [0x0000008D] = "IA32_SGXLEPUBKEYHASH1", [0x0000008E] = "IA32_SGXLEPUBKEYHASH2", @@ -286,6 +286,7 @@ [0xc0010114 - x86_AMD_V_KVM_MSRs_offset] = "VM_CR", [0xc0010115 - x86_AMD_V_KVM_MSRs_offset] = "VM_IGNNE", [0xc0010117 - x86_AMD_V_KVM_MSRs_offset] = "VM_HSAVE_PA", + [0xc001011e - x86_AMD_V_KVM_MSRs_offset] = "AMD64_VM_PAGE_FLUSH", [0xc001011f - x86_AMD_V_KVM_MSRs_offset] = "AMD64_VIRT_SPEC_CTRL", [0xc0010130 - x86_AMD_V_KVM_MSRs_offset] = "AMD64_SEV_ES_GHCB", [0xc0010131 - x86_AMD_V_KVM_MSRs_offset] = "AMD64_SEV", $ The new MSR has a pattern that wasn't matched to avoid a clash with IA32_UCODE_REV, change the regex to prefer the more relevant AMD_ prefixed ones to catch this new AMD64_VM_PAGE_FLUSH MSR. Which causes these parts of tools/perf/ to be rebuilt: CC /tmp/build/perf/trace/beauty/tracepoints/x86_msr.o LD /tmp/build/perf/trace/beauty/tracepoints/perf-in.o LD /tmp/build/perf/trace/beauty/perf-in.o LD /tmp/build/perf/perf-in.o LINK /tmp/build/perf/perf This addresses this perf tools build warning: diff -u tools/arch/x86/include/asm/msr-index.h arch/x86/include/asm/msr-index.h Warning: Kernel ABI header at 'tools/arch/x86/include/asm/msr-index.h' differs from latest version at 'arch/x86/include/asm/msr-index.h' Cc: Adrian Hunter <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Paolo Bonzini <[email protected]> Cc: Tom Lendacky <[email protected]> Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-12-24tools headers cpufeatures: Sync with the kernel sourcesArnaldo Carvalho de Melo1-0/+2
To pick the changes in: 69372cf01290b958 ("x86/cpu: Add VM page flush MSR availablility as a CPUID feature") e1b35da5e624f8b0 ("x86: Enumerate AVX512 FP16 CPUID feature flag") That causes only these 'perf bench' objects to rebuild: CC /tmp/build/perf/bench/mem-memcpy-x86-64-asm.o CC /tmp/build/perf/bench/mem-memset-x86-64-asm.o And addresses these perf build warnings: Warning: Kernel ABI header at 'tools/arch/x86/include/asm/cpufeatures.h' differs from latest version at 'arch/x86/include/asm/cpufeatures.h' diff -u tools/arch/x86/include/asm/cpufeatures.h arch/x86/include/asm/cpufeatures.h Cc: Adrian Hunter <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kyung Min Park <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Paolo Bonzini <[email protected]> Cc: Tom Lendacky <[email protected]> Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-12-18tools headers cpufeatures: Sync with the kernel sourcesArnaldo Carvalho de Melo2-1/+9
To pick the changes in: e7b6385b01d8e9fb ("x86/cpufeatures: Add Intel SGX hardware bits") That causes only these 'perf bench' objects to rebuild: CC /tmp/build/perf/bench/mem-memcpy-x86-64-asm.o CC /tmp/build/perf/bench/mem-memset-x86-64-asm.o And addresses these perf build warnings: Warning: Kernel ABI header at 'tools/arch/x86/include/asm/disabled-features.h' differs from latest version at 'arch/x86/include/asm/disabled-features.h' diff -u tools/arch/x86/include/asm/disabled-features.h arch/x86/include/asm/disabled-features.h Warning: Kernel ABI header at 'tools/arch/x86/include/asm/cpufeatures.h' differs from latest version at 'arch/x86/include/asm/cpufeatures.h' diff -u tools/arch/x86/include/asm/cpufeatures.h arch/x86/include/asm/cpufeatures.h Cc: Adrian Hunter <[email protected]> Cc: Borislav Petkov <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Sean Christopherson <[email protected]> Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-12-18tools arch x86: Sync the msr-index.h copy with the kernel sourcesArnaldo Carvalho de Melo1-1/+11
To pick up the changes in: d205e0f1426e0f99 ("x86/{cpufeatures,msr}: Add Intel SGX Launch Control hardware bits") e7b6385b01d8e9fb ("x86/cpufeatures: Add Intel SGX hardware bits") 43756a298928c9a4 ("powercap: Add AMD Fam17h RAPL support") 298ed2b31f552806 ("x86/msr-index: sort AMD RAPL MSRs by address") 68299a42f8428853 ("x86/mce: Enable additional error logging on certain Intel CPUs") That cause these changes in tooling: $ tools/perf/trace/beauty/tracepoints/x86_msr.sh > before $ cp arch/x86/include/asm/msr-index.h tools/arch/x86/include/asm/msr-index.h $ tools/perf/trace/beauty/tracepoints/x86_msr.sh > after $ diff -u before after --- before 2020-12-17 14:45:49.036994450 -0300 +++ after 2020-12-17 14:46:01.654256639 -0300 @@ -22,6 +22,10 @@ [0x00000060] = "LBR_CORE_TO", [0x00000079] = "IA32_UCODE_WRITE", [0x0000008b] = "IA32_UCODE_REV", + [0x0000008C] = "IA32_SGXLEPUBKEYHASH0", + [0x0000008D] = "IA32_SGXLEPUBKEYHASH1", + [0x0000008E] = "IA32_SGXLEPUBKEYHASH2", + [0x0000008F] = "IA32_SGXLEPUBKEYHASH3", [0x0000009b] = "IA32_SMM_MONITOR_CTL", [0x0000009e] = "IA32_SMBASE", [0x000000c1] = "IA32_PERFCTR0", @@ -59,6 +63,7 @@ [0x00000179] = "IA32_MCG_CAP", [0x0000017a] = "IA32_MCG_STATUS", [0x0000017b] = "IA32_MCG_CTL", + [0x0000017f] = "ERROR_CONTROL", [0x00000180] = "IA32_MCG_EAX", [0x00000181] = "IA32_MCG_EBX", [0x00000182] = "IA32_MCG_ECX", @@ -294,6 +299,7 @@ [0xc0010241 - x86_AMD_V_KVM_MSRs_offset] = "F15H_NB_PERF_CTR", [0xc0010280 - x86_AMD_V_KVM_MSRs_offset] = "F15H_PTSC", [0xc0010299 - x86_AMD_V_KVM_MSRs_offset] = "AMD_RAPL_POWER_UNIT", + [0xc001029a - x86_AMD_V_KVM_MSRs_offset] = "AMD_CORE_ENERGY_STATUS", [0xc001029b - x86_AMD_V_KVM_MSRs_offset] = "AMD_PKG_ENERGY_STATUS", [0xc00102f0 - x86_AMD_V_KVM_MSRs_offset] = "AMD_PPIN_CTL", [0xc00102f1 - x86_AMD_V_KVM_MSRs_offset] = "AMD_PPIN", $ Which causes these parts of tools/perf/ to be rebuilt: CC /tmp/build/perf/trace/beauty/tracepoints/x86_msr.o LD /tmp/build/perf/trace/beauty/tracepoints/perf-in.o LD /tmp/build/perf/trace/beauty/perf-in.o LD /tmp/build/perf/perf-in.o LINK /tmp/build/perf/perf At some point these should just be tables read by perf on demand. This allows 'perf trace' users to use those strings to translate from the msr ids provided by the msr: tracepoints. This addresses this perf tools build warning: diff -u tools/arch/x86/include/asm/msr-index.h arch/x86/include/asm/msr-index.h Warning: Kernel ABI header at 'tools/arch/x86/include/asm/msr-index.h' differs from latest version at 'arch/x86/include/asm/msr-index.h' Cc: Adrian Hunter <[email protected]> Cc: Borislav Petkov <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Rafael J. Wysocki <[email protected]> Cc: Sean Christopherson <[email protected]> Cc: Tony Luck <[email protected]> Cc: Victor Ding <[email protected]> Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-12-06x86/uprobes: Do not use prefixes.nbytes when looping over prefixes.bytesMasami Hiramatsu1-0/+15
Since insn.prefixes.nbytes can be bigger than the size of insn.prefixes.bytes[] when a prefix is repeated, the proper check must be insn.prefixes.bytes[i] != 0 and i < 4 instead of using insn.prefixes.nbytes. Introduce a for_each_insn_prefix() macro for this purpose. Debugged by Kees Cook <[email protected]>. [ bp: Massage commit message, sync with the respective header in tools/ and drop "we". ] Fixes: 2b1444983508 ("uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints") Reported-by: [email protected] Signed-off-by: Masami Hiramatsu <[email protected]> Signed-off-by: Borislav Petkov <[email protected]> Reviewed-by: Srikar Dronamraju <[email protected]> Cc: [email protected] Link: https://lkml.kernel.org/r/160697103739.3146288.7437620795200799020.stgit@devnote2
2020-11-12tools arch: Update arch/x86/lib/mem{cpy,set}_64.S copies used in 'perf bench ↵Arnaldo Carvalho de Melo2-10/+9
mem memcpy' To bring in the change made in this cset: 4d6ffa27b8e5116c ("x86/lib: Change .weak to SYM_FUNC_START_WEAK for arch/x86/lib/mem*_64.S") 6dcc5627f6aec4cb ("x86/asm: Change all ENTRY+ENDPROC to SYM_FUNC_*") I needed to define SYM_FUNC_START_LOCAL() as SYM_L_GLOBAL as mem{cpy,set}_{orig,erms} are used by 'perf bench'. This silences these perf tools build warnings: Warning: Kernel ABI header at 'tools/arch/x86/lib/memcpy_64.S' differs from latest version at 'arch/x86/lib/memcpy_64.S' diff -u tools/arch/x86/lib/memcpy_64.S arch/x86/lib/memcpy_64.S Warning: Kernel ABI header at 'tools/arch/x86/lib/memset_64.S' differs from latest version at 'arch/x86/lib/memset_64.S' diff -u tools/arch/x86/lib/memset_64.S arch/x86/lib/memset_64.S Cc: Adrian Hunter <[email protected]> Cc: Borislav Petkov <[email protected]> Cc: Fangrui Song <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Jiri Slaby <[email protected]> Cc: Namhyung Kim <[email protected]> Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-11-03tools kvm headers: Update KVM headers from the kernel sourcesArnaldo Carvalho de Melo2-0/+33
Some should cause changes in tooling, like the one adding LAST_EXCP, but the way it is structured end up not making that happen. The new SVM_EXIT_INVPCID should get used by arch/x86/util/kvm-stat.c, in the svm_exit_reasons table. The tools/perf/trace/beauty part has scripts to catch changes and automagically create tables, like tools/perf/trace/beauty/kvm_ioctl.sh, but changes are needed to make tools/perf/arch/x86/util/kvm-stat.c catch those automatically. These were handled by the existing scripts: $ tools/perf/trace/beauty/kvm_ioctl.sh > before $ cp include/uapi/linux/kvm.h tools/include/uapi/linux/kvm.h $ tools/perf/trace/beauty/kvm_ioctl.sh > after $ diff -u before after --- before 2020-11-03 08:43:52.910728608 -0300 +++ after 2020-11-03 08:44:04.273959984 -0300 @@ -89,6 +89,7 @@ [0xbf] = "SET_NESTED_STATE", [0xc0] = "CLEAR_DIRTY_LOG", [0xc1] = "GET_SUPPORTED_HV_CPUID", + [0xc6] = "X86_SET_MSR_FILTER", [0xe0] = "CREATE_DEVICE", [0xe1] = "SET_DEVICE_ATTR", [0xe2] = "GET_DEVICE_ATTR", $ $ tools/perf/trace/beauty/vhost_virtio_ioctl.sh > before $ cp include/uapi/linux/vhost.h tools/include/uapi/linux/vhost.h $ $ tools/perf/trace/beauty/vhost_virtio_ioctl.sh > after $ diff -u before after --- before 2020-11-03 08:45:55.522225198 -0300 +++ after 2020-11-03 08:46:12.881578666 -0300 @@ -37,4 +37,5 @@ [0x71] = "VDPA_GET_STATUS", [0x73] = "VDPA_GET_CONFIG", [0x76] = "VDPA_GET_VRING_NUM", + [0x78] = "VDPA_GET_IOVA_RANGE", }; $ This addresses these perf build warnings: Warning: Kernel ABI header at 'tools/arch/arm64/include/uapi/asm/kvm.h' differs from latest version at 'arch/arm64/include/uapi/asm/kvm.h' diff -u tools/arch/arm64/include/uapi/asm/kvm.h arch/arm64/include/uapi/asm/kvm.h Warning: Kernel ABI header at 'tools/arch/s390/include/uapi/asm/sie.h' differs from latest version at 'arch/s390/include/uapi/asm/sie.h' diff -u tools/arch/s390/include/uapi/asm/sie.h arch/s390/include/uapi/asm/sie.h Warning: Kernel ABI header at 'tools/arch/x86/include/uapi/asm/kvm.h' differs from latest version at 'arch/x86/include/uapi/asm/kvm.h' diff -u tools/arch/x86/include/uapi/asm/kvm.h arch/x86/include/uapi/asm/kvm.h Warning: Kernel ABI header at 'tools/arch/x86/include/uapi/asm/svm.h' differs from latest version at 'arch/x86/include/uapi/asm/svm.h' diff -u tools/arch/x86/include/uapi/asm/svm.h arch/x86/include/uapi/asm/svm.h Warning: Kernel ABI header at 'tools/include/uapi/linux/kvm.h' differs from latest version at 'include/uapi/linux/kvm.h' diff -u tools/include/uapi/linux/kvm.h include/uapi/linux/kvm.h Warning: Kernel ABI header at 'tools/include/uapi/linux/vhost.h' differs from latest version at 'include/uapi/linux/vhost.h' diff -u tools/include/uapi/linux/vhost.h include/uapi/linux/vhost.h Cc: Adrian Hunter <[email protected]> Cc: Alexander Yarygin <[email protected]> Cc: Borislav Petkov <[email protected]> Cc: Christian Borntraeger <[email protected]> Cc: Cornelia Huck <[email protected]> Cc: David Ahern <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Joerg Roedel <[email protected]> Cc: Namhyung Kim <[email protected]> Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-11-03tools arch x86: Sync the msr-index.h copy with the kernel sourcesArnaldo Carvalho de Melo1-0/+10
To pick up the changes in: 29dcc60f6a19fb0a ("x86/boot/compressed/64: Add stage1 #VC handler") 36e1be8ada994d50 ("perf/x86/amd/ibs: Fix raw sample data accumulation") 59a854e2f3b90ad2 ("perf/x86/intel: Support TopDown metrics on Ice Lake") 7b2c05a15d29d057 ("perf/x86/intel: Generic support for hardware TopDown metrics") 99e40204e014e066 ("x86/msr: Move the F15h MSRs where they belong") b57de6cd16395be1 ("x86/sev-es: Add SEV-ES Feature Detection") ed7bde7a6dab521e ("cpufreq: intel_pstate: Allow enable/disable energy efficiency") f0f2f9feb4ee6f28 ("x86/msr-index: Define an IA32_PASID MSR") That cause these changes in tooling: $ tools/perf/trace/beauty/tracepoints/x86_msr.sh > before $ cp arch/x86/include/asm/msr-index.h tools/arch/x86/include/asm/msr-index.h $ tools/perf/trace/beauty/tracepoints/x86_msr.sh > after $ diff -u before after --- before 2020-10-19 13:27:33.195274425 -0300 +++ after 2020-10-19 13:27:44.144507610 -0300 @@ -113,6 +113,8 @@ [0x00000309] = "CORE_PERF_FIXED_CTR0", [0x0000030a] = "CORE_PERF_FIXED_CTR1", [0x0000030b] = "CORE_PERF_FIXED_CTR2", + [0x0000030c] = "CORE_PERF_FIXED_CTR3", + [0x00000329] = "PERF_METRICS", [0x00000345] = "IA32_PERF_CAPABILITIES", [0x0000038d] = "CORE_PERF_FIXED_CTR_CTRL", [0x0000038e] = "CORE_PERF_GLOBAL_STATUS", @@ -222,6 +224,7 @@ [0x00000774] = "HWP_REQUEST", [0x00000777] = "HWP_STATUS", [0x00000d90] = "IA32_BNDCFGS", + [0x00000d93] = "IA32_PASID", [0x00000da0] = "IA32_XSS", [0x00000dc0] = "LBR_INFO_0", [0x00000ffc] = "IA32_BNDCFGS_RSVD", @@ -279,6 +282,7 @@ [0xc0010115 - x86_AMD_V_KVM_MSRs_offset] = "VM_IGNNE", [0xc0010117 - x86_AMD_V_KVM_MSRs_offset] = "VM_HSAVE_PA", [0xc001011f - x86_AMD_V_KVM_MSRs_offset] = "AMD64_VIRT_SPEC_CTRL", + [0xc0010130 - x86_AMD_V_KVM_MSRs_offset] = "AMD64_SEV_ES_GHCB", [0xc0010131 - x86_AMD_V_KVM_MSRs_offset] = "AMD64_SEV", [0xc0010140 - x86_AMD_V_KVM_MSRs_offset] = "AMD64_OSVW_ID_LENGTH", [0xc0010141 - x86_AMD_V_KVM_MSRs_offset] = "AMD64_OSVW_STATUS", $ Which causes these parts of tools/perf/ to be rebuilt: CC /tmp/build/perf/trace/beauty/tracepoints/x86_msr.o DESCEND plugins GEN /tmp/build/perf/python/perf.so INSTALL trace_plugins LD /tmp/build/perf/trace/beauty/tracepoints/perf-in.o LD /tmp/build/perf/trace/beauty/perf-in.o LD /tmp/build/perf/perf-in.o LINK /tmp/build/perf/per At some point these should just be tables read by perf on demand. This addresses this perf tools build warning: diff -u tools/arch/x86/include/asm/msr-index.h arch/x86/include/asm/msr-index.h Warning: Kernel ABI header at 'tools/arch/x86/include/asm/msr-index.h' differs from latest version at 'arch/x86/include/asm/msr-index.h' Cc: Adrian Hunter <[email protected]> Cc: Borislav Petkov <[email protected]> Cc: Fenghua Yu <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Joerg Roedel <[email protected]> Cc: Kan Liang <[email protected]> Cc: Kim Phillips <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Rafael J. Wysocki <[email protected]> Cc: Srinivas Pandruvada <[email protected]> Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-11-03tools x86 headers: Update required-features.h header from the kernelArnaldo Carvalho de Melo1-1/+1
To pick the changes from: ecac71816a1829c0 ("x86/paravirt: Use CONFIG_PARAVIRT_XXL instead of CONFIG_PARAVIRT") That don entail any changes in tooling, just addressing these perf tools build warning: Warning: Kernel ABI header at 'tools/arch/x86/include/asm/required-features.h' differs from latest version at 'arch/x86/include/asm/required-features.h' diff -u tools/arch/x86/include/asm/required-features.h arch/x86/include/asm/required-features.h Cc: Adrian Hunter <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Juergen Gross <[email protected]> Cc: Namhyung Kim <[email protected]> Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-11-03tools x86 headers: Update cpufeatures.h headers copiesArnaldo Carvalho de Melo2-2/+13
To pick the changes from: 5866e9205b47a983 ("x86/cpu: Add hardware-enforced cache coherency as a CPUID feature") ff4f82816dff28ff ("x86/cpufeatures: Enumerate ENQCMD and ENQCMDS instructions") 360e7c5c4ca4fd8e ("x86/cpufeatures: Add SEV-ES CPU feature") 18ec63faefb3fd31 ("x86/cpufeatures: Enumerate TSX suspend load address tracking instructions") e48cb1a3fb916500 ("x86/resctrl: Enumerate per-thread MBA controls") Which don't cause any changes in tooling, just addresses these build warnings: Warning: Kernel ABI header at 'tools/arch/x86/include/asm/cpufeatures.h' differs from latest version at 'arch/x86/include/asm/cpufeatures.h' diff -u tools/arch/x86/include/asm/cpufeatures.h arch/x86/include/asm/cpufeatures.h Warning: Kernel ABI header at 'tools/arch/x86/include/asm/disabled-features.h' differs from latest version at 'arch/x86/include/asm/disabled-features.h' diff -u tools/arch/x86/include/asm/disabled-features.h arch/x86/include/asm/disabled-features.h Cc: Adrian Hunter <[email protected]> Cc: Borislav Petkov <[email protected]> Cc: Fenghua Yu <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Krish Sadhukhan <[email protected]> Cc: Kyung Min Park <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Tom Lendacky <[email protected]> Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-10-14Merge tag 'x86_seves_for_v5.10' of ↵Linus Torvalds1-1/+49
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 SEV-ES support from Borislav Petkov: "SEV-ES enhances the current guest memory encryption support called SEV by also encrypting the guest register state, making the registers inaccessible to the hypervisor by en-/decrypting them on world switches. Thus, it adds additional protection to Linux guests against exfiltration, control flow and rollback attacks. With SEV-ES, the guest is in full control of what registers the hypervisor can access. This is provided by a guest-host exchange mechanism based on a new exception vector called VMM Communication Exception (#VC), a new instruction called VMGEXIT and a shared Guest-Host Communication Block which is a decrypted page shared between the guest and the hypervisor. Intercepts to the hypervisor become #VC exceptions in an SEV-ES guest so in order for that exception mechanism to work, the early x86 init code needed to be made able to handle exceptions, which, in itself, brings a bunch of very nice cleanups and improvements to the early boot code like an early page fault handler, allowing for on-demand building of the identity mapping. With that, !KASLR configurations do not use the EFI page table anymore but switch to a kernel-controlled one. The main part of this series adds the support for that new exchange mechanism. The goal has been to keep this as much as possibly separate from the core x86 code by concentrating the machinery in two SEV-ES-specific files: arch/x86/kernel/sev-es-shared.c arch/x86/kernel/sev-es.c Other interaction with core x86 code has been kept at minimum and behind static keys to minimize the performance impact on !SEV-ES setups. Work by Joerg Roedel and Thomas Lendacky and others" * tag 'x86_seves_for_v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (73 commits) x86/sev-es: Use GHCB accessor for setting the MMIO scratch buffer x86/sev-es: Check required CPU features for SEV-ES x86/efi: Add GHCB mappings when SEV-ES is active x86/sev-es: Handle NMI State x86/sev-es: Support CPU offline/online x86/head/64: Don't call verify_cpu() on starting APs x86/smpboot: Load TSS and getcpu GDT entry before loading IDT x86/realmode: Setup AP jump table x86/realmode: Add SEV-ES specific trampoline entry point x86/vmware: Add VMware-specific handling for VMMCALL under SEV-ES x86/kvm: Add KVM-specific VMMCALL handling under SEV-ES x86/paravirt: Allow hypervisor-specific VMMCALL handling under SEV-ES x86/sev-es: Handle #DB Events x86/sev-es: Handle #AC Events x86/sev-es: Handle VMMCALL Events x86/sev-es: Handle MWAIT/MWAITX Events x86/sev-es: Handle MONITOR/MONITORX Events x86/sev-es: Handle INVD Events x86/sev-es: Handle RDPMC Events x86/sev-es: Handle RDTSC(P) Events ...
2020-10-14Merge tag 'objtool-core-2020-10-13' of ↵Linus Torvalds1-34/+0
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull objtool updates from Ingo Molnar: "Most of the changes are cleanups and reorganization to make the objtool code more arch-agnostic. This is in preparation for non-x86 support. Other changes: - KASAN fixes - Handle unreachable trap after call to noreturn functions better - Ignore unreachable fake jumps - Misc smaller fixes & cleanups" * tag 'objtool-core-2020-10-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (21 commits) perf build: Allow nested externs to enable BUILD_BUG() usage objtool: Allow nested externs to enable BUILD_BUG() objtool: Permit __kasan_check_{read,write} under UACCESS objtool: Ignore unreachable trap after call to noreturn functions objtool: Handle calling non-function symbols in other sections objtool: Ignore unreachable fake jumps objtool: Remove useless tests before save_reg() objtool: Decode unwind hint register depending on architecture objtool: Make unwind hint definitions available to other architectures objtool: Only include valid definitions depending on source file type objtool: Rename frame.h -> objtool.h objtool: Refactor jump table code to support other architectures objtool: Make relocation in alternative handling arch dependent objtool: Abstract alternative special case handling objtool: Move macros describing structures to arch-dependent code objtool: Make sync-check consider the target architecture objtool: Group headers to check in a single list objtool: Define 'struct orc_entry' only when needed objtool: Skip ORC entry creation for non-text sections objtool: Move ORC logic out of check() ...
2020-10-06x86, powerpc: Rename memcpy_mcsafe() to copy_mc_to_{user, kernel}()Dan Williams2-128/+0
In reaction to a proposal to introduce a memcpy_mcsafe_fast() implementation Linus points out that memcpy_mcsafe() is poorly named relative to communicating the scope of the interface. Specifically what addresses are valid to pass as source, destination, and what faults / exceptions are handled. Of particular concern is that even though x86 might be able to handle the semantics of copy_mc_to_user() with its common copy_user_generic() implementation other archs likely need / want an explicit path for this case: On Fri, May 1, 2020 at 11:28 AM Linus Torvalds <[email protected]> wrote: > > On Thu, Apr 30, 2020 at 6:21 PM Dan Williams <[email protected]> wrote: > > > > However now I see that copy_user_generic() works for the wrong reason. > > It works because the exception on the source address due to poison > > looks no different than a write fault on the user address to the > > caller, it's still just a short copy. So it makes copy_to_user() work > > for the wrong reason relative to the name. > > Right. > > And it won't work that way on other architectures. On x86, we have a > generic function that can take faults on either side, and we use it > for both cases (and for the "in_user" case too), but that's an > artifact of the architecture oddity. > > In fact, it's probably wrong even on x86 - because it can hide bugs - > but writing those things is painful enough that everybody prefers > having just one function. Replace a single top-level memcpy_mcsafe() with either copy_mc_to_user(), or copy_mc_to_kernel(). Introduce an x86 copy_mc_fragile() name as the rename for the low-level x86 implementation formerly named memcpy_mcsafe(). It is used as the slow / careful backend that is supplanted by a fast copy_mc_generic() in a follow-on patch. One side-effect of this reorganization is that separating copy_mc_64.S to its own file means that perf no longer needs to track dependencies for its memcpy_64.S benchmarks. [ bp: Massage a bit. ] Signed-off-by: Dan Williams <[email protected]> Signed-off-by: Borislav Petkov <[email protected]> Reviewed-by: Tony Luck <[email protected]> Acked-by: Michael Ellerman <[email protected]> Cc: <[email protected]> Link: http://lore.kernel.org/r/CAHk-=wjSqtXAqfUJxFtWNwmguFASTgB0dz1dT3V-78Quiezqbg@mail.gmail.com Link: https://lkml.kernel.org/r/160195561680.2163339.11574962055305783722.stgit@dwillia2-desk3.amr.corp.intel.com
2020-09-10objtool: Make unwind hint definitions available to other architecturesJulien Thierry1-34/+0
Unwind hints are useful to provide objtool with information about stack states in non-standard functions/code. While the type of information being provided might be very arch specific, the mechanism to provide the information can be useful for other architectures. Move the relevant unwint hint definitions for all architectures to see. [ jpoimboe: REGS_IRET -> REGS_PARTIAL ] Signed-off-by: Julien Thierry <[email protected]> Signed-off-by: Josh Poimboeuf <[email protected]>
2020-09-07x86/insn: Make inat-tables.c suitable for pre-decompression codeJoerg Roedel1-1/+49
The inat-tables.c file has some arrays in it that contain pointers to other arrays. These pointers need to be relocated when the kernel image is moved to a different location. The pre-decompression boot-code has no support for applying ELF relocations, so initialize these arrays at runtime in the pre-decompression code to make sure all pointers are correctly initialized. Signed-off-by: Joerg Roedel <[email protected]> Signed-off-by: Borislav Petkov <[email protected]> Acked-by: Masami Hiramatsu <[email protected]> Link: https://lkml.kernel.org/r/[email protected]
2020-08-07tools arch x86: Sync asm/cpufeatures.h with the kernel sourcesArnaldo Carvalho de Melo1-0/+4
To pick up the changes from: 85b23fbc7d88 ("x86/cpufeatures: Add enumeration for SERIALIZE instruction") bd657aa3dd85 ("x86/cpufeatures: Add Architectural LBRs feature bit") fbd5969d1ff2 ("x86/cpufeatures: Mark two free bits in word 3") These should't cause any changes in tooling, it just gets rebuilt by including those headers: CC /tmp/build/perf/bench/mem-memcpy-x86-64-asm.o CC /tmp/build/perf/bench/mem-memset-x86-64-asm.o LD /tmp/build/perf/bench/perf-in.o LD /tmp/build/perf/perf-in.o LINK /tmp/build/perf/perf And silences this perf build warning: Warning: Kernel ABI header at 'tools/arch/x86/include/asm/cpufeatures.h' differs from latest version at 'arch/x86/include/asm/cpufeatures.h' diff -u tools/arch/x86/include/asm/cpufeatures.h arch/x86/include/asm/cpufeatures.h Cc: Adrian Hunter <[email protected]> Cc: Borislav Petkov <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kan Liang <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Ricardo Neri <[email protected]> Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-08-07tools arch x86: Sync the msr-index.h copy with the kernel sourcesArnaldo Carvalho de Melo1-3/+23
To pick up the changes in: d6a162a41bfd x86/msr-index: Add bunch of MSRs for Arch LBR ed7bde7a6dab cpufreq: intel_pstate: Allow enable/disable energy efficiency 99e40204e014 (tip/x86/cleanups) x86/msr: Move the F15h MSRs where they belong 1068ed4547ad x86/msr: Lift AMD family 0x15 power-specific MSRs 5cde265384ca (tag: perf-core-2020-06-01) perf/x86/rapl: Add AMD Fam17h RAPL support Addressing these tools/perf build warnings: That makes the beautification scripts to pick some new entries: $ tools/perf/trace/beauty/tracepoints/x86_msr.sh > before $ cp arch/x86/include/asm/msr-index.h tools/arch/x86/include/asm/msr-index.h $ tools/perf/trace/beauty/tracepoints/x86_msr.sh > after $ diff -u before after --- before 2020-08-07 08:45:18.801298854 -0300 +++ after 2020-08-07 08:45:28.654456422 -0300 @@ -271,6 +271,8 @@ [0xc0010062 - x86_AMD_V_KVM_MSRs_offset] = "AMD_PERF_CTL", [0xc0010063 - x86_AMD_V_KVM_MSRs_offset] = "AMD_PERF_STATUS", [0xc0010064 - x86_AMD_V_KVM_MSRs_offset] = "AMD_PSTATE_DEF_BASE", + [0xc001007a - x86_AMD_V_KVM_MSRs_offset] = "F15H_CU_PWR_ACCUMULATOR", + [0xc001007b - x86_AMD_V_KVM_MSRs_offset] = "F15H_CU_MAX_PWR_ACCUMULATOR", [0xc0010112 - x86_AMD_V_KVM_MSRs_offset] = "K8_TSEG_ADDR", [0xc0010113 - x86_AMD_V_KVM_MSRs_offset] = "K8_TSEG_MASK", [0xc0010114 - x86_AMD_V_KVM_MSRs_offset] = "VM_CR", $ And this gets rebuilt: CC /tmp/build/perf/trace/beauty/tracepoints/x86_msr.o INSTALL trace_plugins LD /tmp/build/perf/trace/beauty/tracepoints/perf-in.o LD /tmp/build/perf/trace/beauty/perf-in.o LD /tmp/build/perf/perf-in.o LINK /tmp/build/perf/perf Now one can trace systemwide asking to see backtraces to where those MSRs are being read/written with: # perf trace -e msr:*_msr/max-stack=32/ --filter="msr==F15H_CU_PWR_ACCUMULATOR || msr==F15H_CU_MAX_PWR_ACCUMULATOR" ^C# # If we use -v (verbose mode) we can see what it does behind the scenes: # perf trace -v -e msr:*_msr/max-stack=32/ --filter="msr==F15H_CU_PWR_ACCUMULATOR || msr==F15H_CU_MAX_PWR_ACCUMULATOR" Using CPUID GenuineIntel-6-8E-A 0xc001007a 0xc001007b New filter for msr:read_msr: (msr==0xc001007a || msr==0xc001007b) && (common_pid != 2448054 && common_pid != 2782) 0xc001007a 0xc001007b New filter for msr:write_msr: (msr==0xc001007a || msr==0xc001007b) && (common_pid != 2448054 && common_pid != 2782) mmap size 528384B ^C# Cc: Adrian Hunter <[email protected]> Cc: Borislav Petkov <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kan Liang <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Rafael J. Wysocki <[email protected]> Cc: Srinivas Pandruvada <[email protected]> Cc: Stephane Eranian <[email protected]> Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-07-17tools arch kvm: Sync kvm headers with the kernel sourcesArnaldo Carvalho de Melo1-2/+3
To pick up the changes from: 83d31e5271ac ("KVM: nVMX: fixes for preemption timer migration") That don't entail changes in tooling. This silences these tools/perf build warnings: Warning: Kernel ABI header at 'tools/arch/x86/include/uapi/asm/kvm.h' differs from latest version at 'arch/x86/include/uapi/asm/kvm.h' diff -u tools/arch/x86/include/uapi/asm/kvm.h arch/x86/include/uapi/asm/kvm.h Cc: Adrian Hunter <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Paolo Bonzini <[email protected]> Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-07-03tools arch: Update arch/x86/lib/memcpy_64.S copy used in 'perf bench mem memcpy'Arnaldo Carvalho de Melo1-0/+4
To bring in the change made in this cset: e3a9e681adb7 ("x86/entry: Fixup bad_iret vs noinstr") This doesn't cause any functional changes to tooling, just a rebuild. Addresses this perf build warning: Warning: Kernel ABI header at 'tools/arch/x86/lib/memcpy_64.S' differs from latest version at 'arch/x86/lib/memcpy_64.S' diff -u tools/arch/x86/lib/memcpy_64.S arch/x86/lib/memcpy_64.S Cc: Adrian Hunter <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-06-17tools arch x86: Sync the msr-index.h copy with the kernel sourcesArnaldo Carvalho de Melo2-0/+6
To pick up the changes in: 7e5b3c267d25 ("x86/speculation: Add Special Register Buffer Data Sampling (SRBDS) mitigation") Addressing these tools/perf build warnings: Warning: Kernel ABI header at 'tools/arch/x86/include/asm/msr-index.h' differs from latest version at 'arch/x86/include/asm/msr-index.h' diff -u tools/arch/x86/include/asm/msr-index.h arch/x86/include/asm/msr-index.h Warning: Kernel ABI header at 'tools/arch/x86/include/asm/cpufeatures.h' differs from latest version at 'arch/x86/include/asm/cpufeatures.h' diff -u tools/arch/x86/include/asm/cpufeatures.h arch/x86/include/asm/cpufeatures.h With this one will be able to use these new AMD MSRs in filters, by name, e.g.: # perf trace -e msr:* --filter "msr==IA32_MCU_OPT_CTRL" ^C# Using -v we can see how it sets up the tracepoint filters, converting from the string in the filter to the numeric value: # perf trace -v -e msr:* --filter "msr==IA32_MCU_OPT_CTRL" Using CPUID GenuineIntel-6-8E-A 0x123 New filter for msr:read_msr: (msr==0x123) && (common_pid != 335 && common_pid != 30344) 0x123 New filter for msr:write_msr: (msr==0x123) && (common_pid != 335 && common_pid != 30344) 0x123 New filter for msr:rdpmc: (msr==0x123) && (common_pid != 335 && common_pid != 30344) mmap size 528384B ^C# The updating process shows how this affects tooling in more detail: $ diff -u tools/arch/x86/include/asm/msr-index.h arch/x86/include/asm/msr-index.h --- tools/arch/x86/include/asm/msr-index.h 2020-06-03 10:36:09.959910238 -0300 +++ arch/x86/include/asm/msr-index.h 2020-06-17 10:04:20.235052901 -0300 @@ -128,6 +128,10 @@ #define TSX_CTRL_RTM_DISABLE BIT(0) /* Disable RTM feature */ #define TSX_CTRL_CPUID_CLEAR BIT(1) /* Disable TSX enumeration */ +/* SRBDS support */ +#define MSR_IA32_MCU_OPT_CTRL 0x00000123 +#define RNGDS_MITG_DIS BIT(0) + #define MSR_IA32_SYSENTER_CS 0x00000174 #define MSR_IA32_SYSENTER_ESP 0x00000175 #define MSR_IA32_SYSENTER_EIP 0x00000176 $ set -o vi $ tools/perf/trace/beauty/tracepoints/x86_msr.sh > before $ cp arch/x86/include/asm/msr-index.h tools/arch/x86/include/asm/msr-index.h $ tools/perf/trace/beauty/tracepoints/x86_msr.sh > after $ diff -u before after --- before 2020-06-17 10:05:49.653114752 -0300 +++ after 2020-06-17 10:06:01.777258731 -0300 @@ -51,6 +51,7 @@ [0x0000011e] = "IA32_BBL_CR_CTL3", [0x00000120] = "IDT_MCR_CTRL", [0x00000122] = "IA32_TSX_CTRL", + [0x00000123] = "IA32_MCU_OPT_CTRL", [0x00000140] = "MISC_FEATURES_ENABLES", [0x00000174] = "IA32_SYSENTER_CS", [0x00000175] = "IA32_SYSENTER_ESP", $ The related change to cpu-features.h affects this: CC /tmp/build/perf/bench/mem-memcpy-x86-64-asm.o CC /tmp/build/perf/bench/mem-memset-x86-64-asm.o This shouldn't be affecting that 'perf bench' entry: $ find tools/perf/ -type f | xargs grep SRBDS $ Cc: Adrian Hunter <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Mark Gross <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Thomas Gleixner <[email protected]> Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-06-09tools headers UAPI: Sync kvm.h headers with the kernel sourcesArnaldo Carvalho de Melo2-2/+22
To pick the changes in: f97f5a56f597 ("x86/kvm/hyper-v: Add support for synthetic debugger interface") 850448f35aaf ("KVM: nVMX: Fix VMX preemption timer migration") 2c4c41325540 ("KVM: x86: Print symbolic names of VMX VM-Exit flags in traces") cc440cdad5b7 ("KVM: nSVM: implement KVM_GET_NESTED_STATE and KVM_SET_NESTED_STATE") f7d31e65368a ("x86/kvm/hyper-v: Explicitly align hcall param for kvm_hyperv_exit") 72de5fa4c161 ("KVM: x86: announce KVM_FEATURE_ASYNC_PF_INT") acd05785e48c ("kvm: add capability for halt polling") 3ecad8c2c1ff ("docs: fix broken references for ReST files that moved around") That do not result in any change in tooling, as the additions are not being used in any table generator. This silences these perf build warning: Warning: Kernel ABI header at 'tools/include/uapi/linux/kvm.h' differs from latest version at 'include/uapi/linux/kvm.h' diff -u tools/include/uapi/linux/kvm.h include/uapi/linux/kvm.h Warning: Kernel ABI header at 'tools/arch/x86/include/uapi/asm/kvm.h' differs from latest version at 'arch/x86/include/uapi/asm/kvm.h' diff -u tools/arch/x86/include/uapi/asm/kvm.h arch/x86/include/uapi/asm/kvm.h Warning: Kernel ABI header at 'tools/arch/x86/include/uapi/asm/vmx.h' differs from latest version at 'arch/x86/include/uapi/asm/vmx.h' diff -u tools/arch/x86/include/uapi/asm/vmx.h arch/x86/include/uapi/asm/vmx.h Cc: Adrian Hunter <[email protected]> Cc: David Matlack <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Jon Doron <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Paolo Bonzini <[email protected]> Cc: Peter Shier <[email protected]> Cc: Sean Christopherson <[email protected]> Cc: Vitaly Kuznetsov <[email protected]> Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-06-09tools arch x86 uapi: Synch asm/unistd.h with the kernel sourcesArnaldo Carvalho de Melo1-1/+8
To pick up the change in: 700d3a5a664d ("x86/syscalls: Revert "x86/syscalls: Make __X32_SYSCALL_BIT be unsigned long"") That doesn't trigger any changes in tooling and silences this perf build warning: Warning: Kernel ABI header at 'tools/arch/x86/include/uapi/asm/unistd.h' differs from latest version at 'arch/x86/include/uapi/asm/unistd.h' diff -u tools/arch/x86/include/uapi/asm/unistd.h arch/x86/include/uapi/asm/unistd.h Cc: Adrian Hunter <[email protected]> Cc: Andy Lutomirski <[email protected]> Cc: Borislav Petkov <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Namhyung Kim <[email protected]> Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-06-04Merge tag 'perf-tools-2020-06-02' of ↵Linus Torvalds1-0/+3
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull perf tooling updates from Arnaldo Carvalho de Melo: "These are additional changes to the perf tools, on top of what Ingo already submitted. - Further Intel PT call-trace fixes - Improve SELinux docs and tool warnings - Fix race at exit in 'perf record' using eventfd. - Add missing build tests to the default set of 'make -C tools/perf build-test' - Sync msr-index.h getting new AMD MSRs to decode and filter in 'perf trace'. - Fix fallback to libaudit in 'perf trace' for arches not using per-arch *.tbl files. - Fixes for 'perf ftrace'. - Fixes and improvements for the 'perf stat' metrics. - Use dummy event to get PERF_RECORD_{FORK,MMAP,etc} while synthesizing those metadata events for pre-existing threads. - Fix leaks detected using clang tooling. - Improvements to PMU event metric testing. - Report summary for 'perf stat' interval mode at the end, summing up all the intervals. - Improve pipe mode, i.e. this now works as expected, continuously dumping samples: # perf record -g -e raw_syscalls:sys_enter | perf --no-pager script - Fixes for event grouping, detecting incompatible groups such as: # perf stat -e '{cycles,power/energy-cores/}' -v WARNING: group events cpu maps do not match, disabling group: anon group { power/energy-cores/, cycles } power/energy-cores/: 0 cycles: 0-7 - Fixes for 'perf probe': blacklist address checking, number of kretprobe instances, etc. - JIT processing improvements and fixes plus the addition of a 'perf test' entry for the java demangler. - Add support for synthesizing first/last level cache, TLB and remove access events from HW tracing in the auxtrace code, first to use is ARM SPE. - Vendor events updates and fixes, including for POWER9 and Intel. - Allow using ~/.perfconfig for removing the ',' separators in 'perf stat' output. - Opt-in support for libpfm4" * tag 'perf-tools-2020-06-02' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (120 commits) perf tools: Remove some duplicated includes perf symbols: Fix kernel maps for kcore and eBPF tools arch x86: Sync the msr-index.h copy with the kernel sources perf stat: Ensure group is defined on top of the same cpu mask perf libdw: Fix off-by 1 relative directory includes perf arm-spe: Support synthetic events perf auxtrace: Add four itrace options perf tools: Move arm-spe-pkt-decoder.h/c to the new dir perf test: Initialize memory in dwarf-unwind perf tests: Don't tail call optimize in unwind test tools compiler.h: Add attribute to disable tail calls perf build: Add a LIBPFM4=1 build test entry perf tools: Add optional support for libpfm4 perf tools: Correct license on jsmn JSON parser perf jit: Fix inaccurate DWARF line table perf jvmti: Remove redundant jitdump line table entries perf build: Add NO_SDT=1 to the default set of build tests perf build: Add NO_LIBCRYPTO=1 to the default set of build tests perf build: Add NO_SYSCALL_TABLE=1 to the build tests perf build: Remove libaudit from the default feature checks ...
2020-06-03Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds1-0/+1
Pull kvm updates from Paolo Bonzini: "ARM: - Move the arch-specific code into arch/arm64/kvm - Start the post-32bit cleanup - Cherry-pick a few non-invasive pre-NV patches x86: - Rework of TLB flushing - Rework of event injection, especially with respect to nested virtualization - Nested AMD event injection facelift, building on the rework of generic code and fixing a lot of corner cases - Nested AMD live migration support - Optimization for TSC deadline MSR writes and IPIs - Various cleanups - Asynchronous page fault cleanups (from tglx, common topic branch with tip tree) - Interrupt-based delivery of asynchronous "page ready" events (host side) - Hyper-V MSRs and hypercalls for guest debugging - VMX preemption timer fixes s390: - Cleanups Generic: - switch vCPU thread wakeup from swait to rcuwait The other architectures, and the guest side of the asynchronous page fault work, will come next week" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (256 commits) KVM: selftests: fix rdtsc() for vmx_tsc_adjust_test KVM: check userspace_addr for all memslots KVM: selftests: update hyperv_cpuid with SynDBG tests x86/kvm/hyper-v: Add support for synthetic debugger via hypercalls x86/kvm/hyper-v: enable hypercalls regardless of hypercall page x86/kvm/hyper-v: Add support for synthetic debugger interface x86/hyper-v: Add synthetic debugger definitions KVM: selftests: VMX preemption timer migration test KVM: nVMX: Fix VMX preemption timer migration x86/kvm/hyper-v: Explicitly align hcall param for kvm_hyperv_exit KVM: x86/pmu: Support full width counting KVM: x86/pmu: Tweak kvm_pmu_get_msr to pass 'struct msr_data' in KVM: x86: announce KVM_FEATURE_ASYNC_PF_INT KVM: x86: acknowledgment mechanism for async pf page ready notifications KVM: x86: interrupt based APF 'page ready' event delivery KVM: introduce kvm_read_guest_offset_cached() KVM: rename kvm_arch_can_inject_async_page_present() to kvm_arch_can_dequeue_async_page_present() KVM: x86: extend struct kvm_vcpu_pv_apf_data with token info Revert "KVM: async_pf: Fix #DF due to inject "Page not Present" and "Page Ready" exceptions simultaneously" KVM: VMX: Replace zero-length array with flexible-array ...
2020-06-02tools arch x86: Sync the msr-index.h copy with the kernel sourcesArnaldo Carvalho de Melo1-0/+3
To pick up the changes in: 5cde265384ca ("perf/x86/rapl: Add AMD Fam17h RAPL support") Addressing this tools/perf build warning: Warning: Kernel ABI header at 'tools/arch/x86/include/asm/msr-index.h' differs from latest version at 'arch/x86/include/asm/msr-index.h' diff -u tools/arch/x86/include/asm/msr-index.h arch/x86/include/asm/msr-index.h With this one will be able to use these new AMD MSRs in filters, by name, e.g.: # perf trace -e msr:* --filter="msr==AMD_PKG_ENERGY_STATUS || msr==AMD_RAPL_POWER_UNIT" Just like it is now possible with other MSRs: [root@five ~]# uname -a Linux five 5.5.17-200.fc31.x86_64 #1 SMP Mon Apr 13 15:29:42 UTC 2020 x86_64 x86_64 x86_64 GNU/Linux [root@five ~]# grep 'model name' -m1 /proc/cpuinfo model name : AMD Ryzen 5 3600X 6-Core Processor [root@five ~]# [root@five ~]# perf trace -e msr:*/max-stack=16/ --filter="msr==AMD_PERF_CTL" --max-events=2 0.000 kworker/1:1-ev/2327824 msr:write_msr(msr: AMD_PERF_CTL, val: 2) do_trace_write_msr ([kernel.kallsyms]) do_trace_write_msr ([kernel.kallsyms]) [0xffffffffc01d71c3] ([acpi_cpufreq]) [0] ([unknown]) __cpufreq_driver_target ([kernel.kallsyms]) od_dbs_update ([kernel.kallsyms]) dbs_work_handler ([kernel.kallsyms]) process_one_work ([kernel.kallsyms]) worker_thread ([kernel.kallsyms]) kthread ([kernel.kallsyms]) ret_from_fork ([kernel.kallsyms]) 8.597 kworker/2:2-ev/2338099 msr:write_msr(msr: AMD_PERF_CTL, val: 2) do_trace_write_msr ([kernel.kallsyms]) do_trace_write_msr ([kernel.kallsyms]) [0] ([unknown]) [0] ([unknown]) __cpufreq_driver_target ([kernel.kallsyms]) od_dbs_update ([kernel.kallsyms]) dbs_work_handler ([kernel.kallsyms]) process_one_work ([kernel.kallsyms]) worker_thread ([kernel.kallsyms]) kthread ([kernel.kallsyms]) ret_from_fork ([kernel.kallsyms]) [root@five ~]# Longer explanation with what happens in the perf build process, automatically after this is made in synch with the kernel sources: $ make -C tools/perf O=/tmp/build/perf install-bin <SNIP> Warning: Kernel ABI header at 'tools/arch/x86/include/asm/msr-index.h' differs from latest version at 'arch/x86/include/asm/msr-index.h' diff -u tools/arch/x86/include/asm/msr-index.h arch/x86/include/asm/msr-index.h <SNIP> make: Leaving directory '/home/acme/git/perf/tools/perf' $ $ tools/perf/trace/beauty/tracepoints/x86_msr.sh > before $ $ diff -u tools/arch/x86/include/asm/msr-index.h arch/x86/include/asm/msr-index.h --- tools/arch/x86/include/asm/msr-index.h 2020-06-02 10:46:36.217782288 -0300 +++ arch/x86/include/asm/msr-index.h 2020-05-28 10:41:23.313794627 -0300 @@ -301,6 +301,9 @@ #define MSR_PP1_ENERGY_STATUS 0x00000641 #define MSR_PP1_POLICY 0x00000642 +#define MSR_AMD_PKG_ENERGY_STATUS 0xc001029b +#define MSR_AMD_RAPL_POWER_UNIT 0xc0010299 + /* Config TDP MSRs */ #define MSR_CONFIG_TDP_NOMINAL 0x00000648 #define MSR_CONFIG_TDP_LEVEL_1 0x00000649 $ cp arch/x86/include/asm/msr-index.h tools/arch/x86/include/asm/msr-index.h $ $ make -C tools/perf O=/tmp/build/perf install-bin <SNIP> CC /tmp/build/perf/trace/beauty/tracepoints/x86_msr.o LD /tmp/build/perf/trace/beauty/tracepoints/perf-in.o LD /tmp/build/perf/trace/beauty/perf-in.o LD /tmp/build/perf/perf-in.o LINK /tmp/build/perf/perf <SNIP> make: Leaving directory '/home/acme/git/perf/tools/perf' $ $ tools/perf/trace/beauty/tracepoints/x86_msr.sh > after $ diff -u before after --- before 2020-06-02 10:47:08.486334348 -0300 +++ after 2020-06-02 10:47:33.075008948 -0300 @@ -286,6 +286,8 @@ [0xc0010240 - x86_AMD_V_KVM_MSRs_offset] = "F15H_NB_PERF_CTL", [0xc0010241 - x86_AMD_V_KVM_MSRs_offset] = "F15H_NB_PERF_CTR", [0xc0010280 - x86_AMD_V_KVM_MSRs_offset] = "F15H_PTSC", + [0xc0010299 - x86_AMD_V_KVM_MSRs_offset] = "AMD_RAPL_POWER_UNIT", + [0xc001029b - x86_AMD_V_KVM_MSRs_offset] = "AMD_PKG_ENERGY_STATUS", [0xc00102f0 - x86_AMD_V_KVM_MSRs_offset] = "AMD_PPIN_CTL", [0xc00102f1 - x86_AMD_V_KVM_MSRs_offset] = "AMD_PPIN", }; $ Cc: Adrian Hunter <[email protected]> Cc: David Ahern <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Stephane Eranian <[email protected]> Cc: Wang Nan <[email protected]> Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-06-01Merge tag 'objtool-core-2020-06-01' of ↵Linus Torvalds1-2/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull objtool updates from Ingo Molnar: "There are a lot of objtool changes in this cycle, all across the map: - Speed up objtool significantly, especially when there are large number of sections - Improve objtool's understanding of special instructions such as IRET, to reduce the number of annotations required - Implement 'noinstr' validation - Do baby steps for non-x86 objtool use - Simplify/fix retpoline decoding - Add vmlinux validation - Improve documentation - Fix various bugs and apply smaller cleanups" * tag 'objtool-core-2020-06-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (54 commits) objtool: Enable compilation of objtool for all architectures objtool: Move struct objtool_file into arch-independent header objtool: Exit successfully when requesting help objtool: Add check_kcov_mode() to the uaccess safelist samples/ftrace: Fix asm function ELF annotations objtool: optimize add_dead_ends for split sections objtool: use gelf_getsymshndx to handle >64k sections objtool: Allow no-op CFI ops in alternatives x86/retpoline: Fix retpoline unwind x86: Change {JMP,CALL}_NOSPEC argument x86: Simplify retpoline declaration x86/speculation: Change FILL_RETURN_BUFFER to work with objtool objtool: Add support for intra-function calls objtool: Move the IRET hack into the arch decoder objtool: Remove INSN_STACK objtool: Make handle_insn_ops() unconditional objtool: Rework allocating stack_ops on decode objtool: UNWIND_HINT_RET_OFFSET should not check registers objtool: is_fentry_call() crashes if call has no destination x86,smap: Fix smap_{save,restore}() alternatives ...
2020-06-01KVM: selftests: VMX preemption timer migration testMakarand Sonare1-0/+1
When a nested VM with a VMX-preemption timer is migrated, verify that the nested VM and its parent VM observe the VMX-preemption timer exit close to the original expiration deadline. Signed-off-by: Makarand Sonare <[email protected]> Reviewed-by: Jim Mattson <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2020-05-26x86/syscalls: Revert "x86/syscalls: Make __X32_SYSCALL_BIT be unsigned long"Andy Lutomirski1-1/+1
Revert 45e29d119e99 ("x86/syscalls: Make __X32_SYSCALL_BIT be unsigned long") and add a comment to discourage someone else from making the same mistake again. It turns out that some user code fails to compile if __X32_SYSCALL_BIT is unsigned long. See, for example [1] below. [ bp: Massage and do the same thing in the respective tools/ header. ] Fixes: 45e29d119e99 ("x86/syscalls: Make __X32_SYSCALL_BIT be unsigned long") Reported-by: Thorsten Glaser <[email protected]> Signed-off-by: Andy Lutomirski <[email protected]> Signed-off-by: Borislav Petkov <[email protected]> Cc: [email protected] Link: [1] https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=954294 Link: https://lkml.kernel.org/r/92e55442b744a5951fdc9cfee10badd0a5f7f828.1588983892.git.luto@kernel.org
2020-04-22objtool: Remove SAVE/RESTORE hintsPeter Zijlstra1-3/+1
The SAVE/RESTORE hints are now unused; remove them. Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Reviewed-by: Miroslav Benes <[email protected]> Reviewed-by: Alexandre Chartre <[email protected]> Acked-by: Josh Poimboeuf <[email protected]> Link: https://lkml.kernel.org/r/[email protected] Signed-off-by: Ingo Molnar <[email protected]>
2020-04-22objtool: Introduce HINT_RET_OFFSETPeter Zijlstra1-0/+1
Normally objtool ensures a function keeps the stack layout invariant. But there is a useful exception, it is possible to stuff the return stack in order to 'inject' a 'call': push $fun ret In this case the invariant mentioned above is violated. Add an objtool HINT to annotate this and allow a function exit with a modified stack frame. Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Reviewed-by: Miroslav Benes <[email protected]> Reviewed-by: Alexandre Chartre <[email protected]> Acked-by: Josh Poimboeuf <[email protected]> Link: https://lkml.kernel.org/r/[email protected] Signed-off-by: Ingo Molnar <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.