aboutsummaryrefslogtreecommitdiff
path: root/sound
AgeCommit message (Collapse)AuthorFilesLines
2024-08-08ASoC: codecs: ES8326: input issue after initZhang Yi1-0/+2
We found an input issue after initiation.So we added the default input source at initiation. Signed-off-by: Zhang Yi <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Mark Brown <[email protected]>
2024-08-08ASoC: cs35l56: Use regmap_read_bypassed() to wake the deviceSimon Trimmer1-14/+5
Now that regmap_read_bypassed() has been added to the kernel it is preferable to wake the device with a read rather than a write as the utility function can be called at a time before the device has been identified. Signed-off-by: Simon Trimmer <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Mark Brown <[email protected]>
2024-08-08ASoC: Merge fixesMark Brown26-61/+245
So we can apply AMD patches that rely on them.
2024-08-08ALSA: core: Drop snd_print stuff and coTakashi Iwai2-80/+0
Now that all users of snd_print*() are gone, let's drop the functions completely. This also makes CONFIG_SND_VERBOSE_PRINTK redundant, and it's dropped, too. Reviewed-by: Jaroslav Kysela <[email protected]> Signed-off-by: Takashi Iwai <[email protected]> Link: https://patch.msgid.link/[email protected]
2024-08-08ALSA: asihpi: Use standard print APITakashi Iwai2-59/+44
Use the standard print API with dev_*() instead of the old house-baked one. It gives better information and allows dynamically control of debug prints. The debug prints with a special macro snd_printddd() are replaced with the conditional pr_debug(). Unfortunately dev_dbg() can't be applied well due to the lack of the reference to the device pointer. Reviewed-by: Jaroslav Kysela <[email protected]> Signed-off-by: Takashi Iwai <[email protected]> Link: https://patch.msgid.link/[email protected]
2024-08-08ALSA: sparc: Use standard print APITakashi Iwai2-37/+49
Use the standard print API with dev_*() instead of the old house-baked one. It gives better information and allows dynamically control of debug prints. Reviewed-by: Jaroslav Kysela <[email protected]> Signed-off-by: Takashi Iwai <[email protected]> Link: https://patch.msgid.link/[email protected]
2024-08-08ALSA: sh: Use standard print APITakashi Iwai2-8/+7
Use the standard print API with dev_*() instead of the old house-baked one. It gives better information and allows dynamically control of debug prints. Reviewed-by: Jaroslav Kysela <[email protected]> Signed-off-by: Takashi Iwai <[email protected]> Link: https://patch.msgid.link/[email protected]
2024-08-08ALSA: ppc: Use standard print APITakashi Iwai6-45/+41
Use the standard print API with dev_*() instead of the old house-baked one. It gives better information and allows dynamically control of debug prints. Reviewed-by: Jaroslav Kysela <[email protected]> Signed-off-by: Takashi Iwai <[email protected]> Link: https://patch.msgid.link/[email protected]
2024-08-08ALSA: pdaudiocf: Use standard print APITakashi Iwai3-36/+24
Use the standard print API with dev_*() instead of the old house-baked one. It gives better information and allows dynamically control of debug prints. Reviewed-by: Jaroslav Kysela <[email protected]> Signed-off-by: Takashi Iwai <[email protected]> Link: https://patch.msgid.link/[email protected]
2024-08-08ALSA: vxpocket: Use standard print APITakashi Iwai2-21/+14
Use the standard print API with dev_*() instead of the old house-baked one. It gives better information and allows dynamically control of debug prints. Reviewed-by: Jaroslav Kysela <[email protected]> Signed-off-by: Takashi Iwai <[email protected]> Link: https://patch.msgid.link/[email protected]
2024-08-08ALSA: intel8x0: Drop unused snd_printd() callsTakashi Iwai2-6/+0
There are commented out debug prints, which are utterly superfluous. Let's drop them. Reviewed-by: Jaroslav Kysela <[email protected]> Signed-off-by: Takashi Iwai <[email protected]> Link: https://patch.msgid.link/[email protected]
2024-08-08ALSA: usb-audio: Use standard print APITakashi Iwai1-3/+3
Use pr_*() instead of open-coded printk() for code simplicity. Reviewed-by: Jaroslav Kysela <[email protected]> Signed-off-by: Takashi Iwai <[email protected]> Link: https://patch.msgid.link/[email protected]
2024-08-08ALSA: usx2y: Use standard print APITakashi Iwai7-150/+141
Use the standard print API with dev_*() instead of the old house-baked one. It gives better information and allows dynamically control of debug prints. Some superfluous debug prints are dropped, and some ambiguous messages are slightly rephrased. The sk.dev pointer is set properly for allowing to call dev_*() functions, too. Reviewed-by: Jaroslav Kysela <[email protected]> Signed-off-by: Takashi Iwai <[email protected]> Link: https://patch.msgid.link/[email protected]
2024-08-08ALSA: emux: Use standard print APITakashi Iwai5-50/+59
Use the standard print API with dev_*() instead of the old house-baked one. It gives better information and allows dynamically control of debug prints. Some functions are changed to receive snd_card object for calling dev_*() functions, too. Reviewed-by: Jaroslav Kysela <[email protected]> Signed-off-by: Takashi Iwai <[email protected]> Link: https://patch.msgid.link/[email protected]
2024-08-08ALSA: trident: Use standard print APITakashi Iwai1-5/+5
Use the standard print API with dev_*() instead of the old house-baked one. It gives better information and allows dynamically control of debug prints. Reviewed-by: Jaroslav Kysela <[email protected]> Signed-off-by: Takashi Iwai <[email protected]> Link: https://patch.msgid.link/[email protected]
2024-08-08ALSA: emu10k1: Use dev_warn()Takashi Iwai1-2/+3
Replace an open-coded printk warning with dev_warn() for code simplicity and consistency. Reviewed-by: Jaroslav Kysela <[email protected]> Signed-off-by: Takashi Iwai <[email protected]> Link: https://patch.msgid.link/[email protected]
2024-08-08ALSA: azt3328: Use pr_warn()Takashi Iwai1-1/+1
Replace with the standard print API from the home-baked one. Reviewed-by: Jaroslav Kysela <[email protected]> Signed-off-by: Takashi Iwai <[email protected]> Link: https://patch.msgid.link/[email protected]
2024-08-08ALSA: lx6464es: Cleanup the print API usagesTakashi Iwai2-7/+4
Use pr_debug() instead of open-coded printk(). Also drop a few snd_printdd() calls that can be better done via ftrace. Reviewed-by: Jaroslav Kysela <[email protected]> Signed-off-by: Takashi Iwai <[email protected]> Link: https://patch.msgid.link/[email protected]
2024-08-08ALSA: korg1212: Use standard print APITakashi Iwai1-14/+16
Use the standard print API with dev_*() instead of the old house-baked one. It gives better information and allows dynamically control of debug prints. Reviewed-by: Jaroslav Kysela <[email protected]> Signed-off-by: Takashi Iwai <[email protected]> Link: https://patch.msgid.link/[email protected]
2024-08-08ALSA: riptide: Use standard print APITakashi Iwai1-95/+98
Use the standard print API with dev_*() instead of the old house-baked one. It gives better information and allows dynamically control of debug prints. The device pointer is stored in struct cmdif for calling dev_*() functions. Reviewed-by: Jaroslav Kysela <[email protected]> Signed-off-by: Takashi Iwai <[email protected]> Link: https://patch.msgid.link/[email protected]
2024-08-08ALSA: wss: Use standard print APITakashi Iwai1-88/+90
Use the standard print API with dev_*() instead of the old house-baked one. It gives better information and allows dynamically control of debug prints. Reviewed-by: Jaroslav Kysela <[email protected]> Signed-off-by: Takashi Iwai <[email protected]> Link: https://patch.msgid.link/[email protected]
2024-08-08ALSA: wavefront: Use standard print APITakashi Iwai4-150/+158
Use the standard print API with dev_*() instead of the old house-baked one. It gives better information and allows dynamically control of debug prints. Reviewed-by: Jaroslav Kysela <[email protected]> Signed-off-by: Takashi Iwai <[email protected]> Link: https://patch.msgid.link/[email protected]
2024-08-08ALSA: sscape: Use standard print APITakashi Iwai1-48/+48
Use the standard print API with dev_*() instead of the old house-baked one. It gives better information and allows dynamically control of debug prints. The device pointer is stored in struct soundscape for calling dev_*(). Reviewed-by: Jaroslav Kysela <[email protected]> Signed-off-by: Takashi Iwai <[email protected]> Link: https://patch.msgid.link/[email protected]
2024-08-08ALSA: sc6000: Use standard print APITakashi Iwai1-87/+90
Use the standard print API with dev_*() instead of the old house-baked one. It gives better information and allows dynamically control of debug prints. Some functions are changed to receive a device pointer to be passed to dev_*() calls. Reviewed-by: Jaroslav Kysela <[email protected]> Signed-off-by: Takashi Iwai <[email protected]> Link: https://patch.msgid.link/[email protected]
2024-08-08ALSA: pcm: oss: Use pr_debug()Takashi Iwai1-1/+1
Use the standard print API instead of open-coded printk(). Reviewed-by: Jaroslav Kysela <[email protected]> Signed-off-by: Takashi Iwai <[email protected]> Link: https://patch.msgid.link/[email protected]
2024-08-08ALSA: control_led: Use dev_err()Takashi Iwai1-1/+1
Use the standard print API instead of open-coded printk(). Reviewed-by: Jaroslav Kysela <[email protected]> Signed-off-by: Takashi Iwai <[email protected]> Link: https://patch.msgid.link/[email protected]
2024-08-08ALSA: sb: Use standard print APITakashi Iwai10-94/+105
Use the standard print API with dev_*() instead of the old house-baked one. It gives better information and allows dynamically control of debug prints. Some functions are changed to receive snd_card pointer for referring to the device pointer for dev_*() calls, too. Reviewed-by: Jaroslav Kysela <[email protected]> Signed-off-by: Takashi Iwai <[email protected]> Link: https://patch.msgid.link/[email protected]
2024-08-08ALSA: opti9xx: Use standard print APITakashi Iwai2-107/+118
Use the standard print API with dev_*() instead of the old house-baked one. It gives better information and allows dynamically control of debug prints. The card pointer is stored in struct snd_opti9xx and snd_miro to be referred for dev_*() calls. Reviewed-by: Jaroslav Kysela <[email protected]> Signed-off-by: Takashi Iwai <[email protected]> Link: https://patch.msgid.link/[email protected]
2024-08-08ALSA: opl3sa2: Use standard print APITakashi Iwai1-24/+22
Use the standard print API with dev_*() instead of the old house-baked one. It gives better information and allows dynamically control of debug prints. The card pointer is stored in struct snd_opl3sa2 to be referred for dev_*() calls. Reviewed-by: Jaroslav Kysela <[email protected]> Signed-off-by: Takashi Iwai <[email protected]> Link: https://patch.msgid.link/[email protected]
2024-08-08ALSA: msnd: Use standard print APITakashi Iwai3-122/+112
Use the standard print API with dev_*() instead of the old house-baked one. It gives better information and allows dynamically control of debug prints. Reviewed-by: Jaroslav Kysela <[email protected]> Signed-off-by: Takashi Iwai <[email protected]> Link: https://patch.msgid.link/[email protected]
2024-08-08ALSA: gus: Use standard print APITakashi Iwai13-179/+267
Use the standard print API with dev_*() instead of the old house-baked one. It gives better information and allows dynamically control of debug prints. Some commented-out debug prints and dead code are dropped as well. Reviewed-by: Jaroslav Kysela <[email protected]> Signed-off-by: Takashi Iwai <[email protected]> Link: https://patch.msgid.link/[email protected]
2024-08-08ALSA: es18xx: Use standard print APITakashi Iwai1-41/+46
Use the standard print API with dev_*() instead of the old house-baked one. It gives better information and allows dynamically control of debug prints. For referring to the device, introduce snd_card pointer to struct snd_es18xx. Reviewed-by: Jaroslav Kysela <[email protected]> Signed-off-by: Takashi Iwai <[email protected]> Link: https://patch.msgid.link/[email protected]
2024-08-08ALSA: es1688: Use standard print APITakashi Iwai2-27/+30
Use the standard print API with dev_*() instead of the old house-baked one. It gives better information and allows dynamically control of debug prints. For referring to the device, introduce snd_card pointer to struct snd_es1688. Reviewed-by: Jaroslav Kysela <[email protected]> Signed-off-by: Takashi Iwai <[email protected]> Link: https://patch.msgid.link/[email protected]
2024-08-08ALSA: cs4236: Use standard print APITakashi Iwai2-42/+45
Use the standard print API with dev_*() instead of the old house-baked one. It gives better information and allows dynamically control of debug prints. Reviewed-by: Jaroslav Kysela <[email protected]> Signed-off-by: Takashi Iwai <[email protected]> Link: https://patch.msgid.link/[email protected]
2024-08-08ALSA: cmi8330: Use standard print APITakashi Iwai1-19/+17
Use the standard print API with dev_*() instead of the old house-baked one. It gives better information and allows dynamically control of debug prints. Reviewed-by: Jaroslav Kysela <[email protected]> Signed-off-by: Takashi Iwai <[email protected]> Link: https://patch.msgid.link/[email protected]
2024-08-08ALSA: cmi8328: Use standard print APITakashi Iwai1-21/+21
Use the standard print API with dev_*() instead of the old house-baked one. It gives better information and allows dynamically control of debug prints. Reviewed-by: Jaroslav Kysela <[email protected]> Signed-off-by: Takashi Iwai <[email protected]> Link: https://patch.msgid.link/[email protected]
2024-08-08ALSA: azt2320: Use standard print APITakashi Iwai1-8/+6
Use the standard print API with dev_*() instead of the old house-baked one. It gives better information and allows dynamically control of debug prints. Reviewed-by: Jaroslav Kysela <[email protected]> Signed-off-by: Takashi Iwai <[email protected]> Link: https://patch.msgid.link/[email protected]
2024-08-08ALSA: als100: Use standard print APITakashi Iwai1-9/+7
Use the standard print API with dev_*() instead of the old house-baked one. It gives better information and allows dynamically control of debug prints. Use the standard print API instead of open-coded printk(). Reviewed-by: Jaroslav Kysela <[email protected]> Signed-off-by: Takashi Iwai <[email protected]> Link: https://patch.msgid.link/[email protected]
2024-08-08ALSA: ad1816a: Use standard print APITakashi Iwai2-16/+16
Use the standard print API with dev_*() instead of the old house-baked one. It gives better information and allows dynamically control of debug prints. Reviewed-by: Jaroslav Kysela <[email protected]> Signed-off-by: Takashi Iwai <[email protected]> Link: https://patch.msgid.link/[email protected]
2024-08-08ALSA: i2c: Drop commented old debug printsTakashi Iwai5-32/+0
There are quite a few commented-out debug prints that have never been used in the production code. Let's rip them off for code cleanness. Reviewed-by: Jaroslav Kysela <[email protected]> Signed-off-by: Takashi Iwai <[email protected]> Link: https://patch.msgid.link/[email protected]
2024-08-08ALSA: i2c: pt2258: Use standard print APITakashi Iwai1-3/+3
Use the standard print API with dev_*() instead of the old house-baked one. It gives better information and allows dynamically control of debug prints. Reviewed-by: Jaroslav Kysela <[email protected]> Signed-off-by: Takashi Iwai <[email protected]> Link: https://patch.msgid.link/[email protected]
2024-08-08ALSA: i2c: cs8427: Use standard print APITakashi Iwai1-17/+20
Use the standard print API with dev_*() instead of the old house-baked one. It gives better information and allows dynamically control of debug prints. Reviewed-by: Jaroslav Kysela <[email protected]> Signed-off-by: Takashi Iwai <[email protected]> Link: https://patch.msgid.link/[email protected]
2024-08-08ALSA: pcsp: Use standard print APITakashi Iwai3-30/+31
Use the standard print API with dev_*() instead of the old house-baked one. It gives better information and allows dynamically control of debug prints. Reviewed-by: Jaroslav Kysela <[email protected]> Signed-off-by: Takashi Iwai <[email protected]> Link: https://patch.msgid.link/[email protected]
2024-08-08ALSA: dummy: Use standard print APITakashi Iwai1-3/+2
Use pr_*() macro instead of open-coded printk() just for code simplification. Reviewed-by: Jaroslav Kysela <[email protected]> Signed-off-by: Takashi Iwai <[email protected]> Link: https://patch.msgid.link/[email protected]
2024-08-08ALSA: aloop: Use standard print APITakashi Iwai1-1/+1
Use pr_err() instead of open-coded printk() just for code simplification. Reviewed-by: Jaroslav Kysela <[email protected]> Signed-off-by: Takashi Iwai <[email protected]> Link: https://patch.msgid.link/[email protected]
2024-08-08ALSA: vx_core: Use standard print APITakashi Iwai4-48/+44
Use the standard print API with dev_*() instead of the old house-baked one. It gives better information and allows dynamically control of debug prints. The commented old debug prints are dropped, too. Reviewed-by: Jaroslav Kysela <[email protected]> Signed-off-by: Takashi Iwai <[email protected]> Link: https://patch.msgid.link/[email protected]
2024-08-08ALSA: vx_core: Drop unused dev fieldTakashi Iwai1-1/+1
The vx_core.dev field has never been set but referred incorrectly at firmware loading. Pass the proper device pointer from card->dev at request_firmware(), and drop the unused dev field from vx_core, too. Reviewed-by: Jaroslav Kysela <[email protected]> Signed-off-by: Takashi Iwai <[email protected]> Link: https://patch.msgid.link/[email protected]
2024-08-08ALSA: virmidi: Use standard print APITakashi Iwai1-4/+4
Use the standard print API with dev_*() instead of the old house-baked one. It gives better information and allows dynamically control of debug prints. Reviewed-by: Jaroslav Kysela <[email protected]> Signed-off-by: Takashi Iwai <[email protected]> Link: https://patch.msgid.link/[email protected]
2024-08-08ALSA: serial-u16550: Use standard print APITakashi Iwai1-20/+21
Use the standard print API with dev_*() instead of the old house-baked one. It gives better information and allows dynamically control of debug prints. Reviewed-by: Jaroslav Kysela <[email protected]> Signed-off-by: Takashi Iwai <[email protected]> Link: https://patch.msgid.link/[email protected]
2024-08-08ALSA: opl4: Use standard print APITakashi Iwai2-5/+5
Use the standard print API with dev_*() instead of the old house-baked one. It gives better information and allows dynamically control of debug prints. Reviewed-by: Jaroslav Kysela <[email protected]> Signed-off-by: Takashi Iwai <[email protected]> Link: https://patch.msgid.link/[email protected]
Powered by cgit, Gruvboxed by Blaster4385.