aboutsummaryrefslogtreecommitdiff
path: root/sound
AgeCommit message (Collapse)AuthorFilesLines
2012-07-11sound/aoa: Adapt to new i2c probing schemeAndreas Schwab2-149/+6
The i2c-powermac driver now creates the i2c devices properly from the device-tree, including workarounds for broken or missing device-tree bits, so let's just use the normal probe methods and get rid of the hand made device creation code. Signed-off-by: Andreas Schwab <[email protected]> Signed-off-by: Benjamin Herrenschmidt <[email protected]>
2012-07-10ASoC: arizona: Support variable FLL VCO multipliersMark Brown3-3/+7
Some Arizona chips have a higher frequency for the FLL VCO, support this in the common code. Signed-off-by: Mark Brown <[email protected]>
2012-07-10ASoC: tlv320aic3x: add input clock selectionJiri Prchal2-0/+14
This patch adds input selection of main codec clock - from what pin. Both registers set same value since codec uses clock divider or pll at one time. Signed-off-by: Jiri Prchal <[email protected]> Signed-off-by: Mark Brown <[email protected]>
2012-07-10ASoC: tlv320aic3x: add AGC settingsJiri Prchal1-0/+25
This patch adds AGC target level and times settings for TLV320AIC3x. Enums uses small arrays of two channels left and right since it uses different registers. Signed-off-by: Jiri Prchal <[email protected]> Signed-off-by: Mark Brown <[email protected]>
2012-07-10Merge branch 'next/devel-dma-ops' of ↵Arnd Bergmann1-8/+10
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/dma From Kukjin Kim <[email protected]>: Here is updating DMA common operation for Samsung SoCs. Since some DMA client driver such as spi needs to change the configuration after dma_request() so this branch adds dma_config() can configure DMA transmit option which is included in dma_request() after that. Note, according to the changes, needs to update spi and ASoC drivers for Samsung SoCs and only got the ack from Mark Brown not Grant Likely and as I know, he is busy for moving. But I think, the spi change has no problem and it is simple. * 'next/devel-dma-ops' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: SAMSUNG: Fix compiler warning in dma-ops.c file ASoC: follow the updated samsung DMA common operations spi/s3c64xx: Add the use of DMA config operation ARM: SAMSUNG: Add config() function in DMA common operations Signed-off-by: Arnd Bergmann <[email protected]>
2012-07-09ASoC: tlv320aic3x: add deemphasis switchJiri Prchal1-0/+3
This patch adds missing deemphasis switch. Signed-off-by: Jiri Prchal <[email protected]> Signed-off-by: Mark Brown <[email protected]>
2012-07-09ASoC: wm5102: Fix cut'n'paste for digital volume registersMark Brown1-3/+3
The analogue PGA shifts were used; this makes no practical difference as the values are the same. Signed-off-by: Mark Brown <[email protected]>
2012-07-09ASoC: arizona: Add IN4 to the mixer tablesMark Brown2-1/+5
Some devices have four input structures rather than three. Signed-off-by: Mark Brown <[email protected]>
2012-07-09ASoC: arizona: Export dai_opsMark Brown1-0/+1
Signed-off-by: Mark Brown <[email protected]>
2012-07-06Merge branch 'for-3.6/common-clk' of ↵Arnd Bergmann5-16/+16
git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra into next/clk From Stephen Warren <[email protected]>: This branch contains numerous changes required as a baseline in order to convert Tegra to the common clock framework. The intention was to also include patches to actually convert Tegra to the common clock framework. However, those patches appeared late in the kernel cycle and currently cause regressions on some boards, so were dropped for now. * 'for-3.6/common-clk' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra: ARM: tegra: Provide clock for only one PWM controller ARM: tegra: Fix PWM clock programming ARM: tegra: dma: rename driver name for clock to "tegra-apbdma" ARM: tegra: Remove second instance of uart clk crypto: add clk_prepare/clk_unprepare ASoC: tegra: add clk_prepare/clk_unprepare staging: nvec: add clk_prepare/clk_unprepare spi/tegra: add clk_prepare/clk_unprepare Input: tegra-kbc - add clk_prepare/clk_unprepare USB: ehci-tegra: add clk_prepare/clk_unprepare mmc: tegra: add clk_prepare/clk_unprepare i2c: tegra: Add clk_prepare/clk_unprepare ARM: tegra: add clk_prepare/clk_unprepare Signed-off-by: Arnd Bergmann <[email protected]>
2012-07-06Merge branch 'tegra/cleanup' into next/clkArnd Bergmann1-9/+1
Dependency for tegra/common-clk branch Signed-off-by: Arnd Bergmann <[email protected]>
2012-07-06Merge branch 'for-3.6/cleanup' of ↵Arnd Bergmann1-9/+1
git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra into next/cleanup From Stephen Warren <[email protected]>: This branch contains various minor cleanups, such as binding and .dts renames, DT content cleanup, SDHCI support-8bit property usage cleanup, and removal of some unnecessary sleep code. * 'for-3.6/cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra: ARM: dt: tegra: rename board files to match SoC ASoC: tegra: simplify Kconfig dependencies ARM: dt: tegra: remove legacy support-8bit property mmc: tegra: use bus-width property instead of support-8bit ARM: tegra: Remove flow controller programming dt: name all Tegra binding docs consistently ARM: tegra20: Rename "emc" to "memory-controller" ARM: dt: tegra20: Rename "emc" to "memory-controller" ARM: tegra{20,30}: Rename "mc" to "memory-controller" ARM: dt: tegra{20,30}.dtsi: Rename "mc" to "memory-controller" amba: tegra-ahb: Remove empty *_remove() Signed-off-by: Arnd Bergmann <[email protected]>
2012-07-06ASoC: omap-mcpdm: Add missing MODULE_ALIASPeter Ujfalusi1-0/+1
The MODULE_ALIAS() was missing from the driver. Signed-off-by: Peter Ujfalusi <[email protected]> Signed-off-by: Mark Brown <[email protected]>
2012-07-06ASoC: arizona: Change DAPM routes for AIF clocks when we change themMark Brown1-3/+29
Signed-off-by: Mark Brown <[email protected]> Acked-by: Liam Girdwood <[email protected]>
2012-07-06ASoC: dapm: Allow routes to be deleted at runtimeMark Brown1-0/+77
Since we're now relying on DAPM for things like enabling clocks when we reparent the clocks for widgets we need to either use conditional routes (which are expensive) or remove routes at runtime. Add a route removal API to support this use case. Signed-off-by: Mark Brown <[email protected]> Acked-by: Liam Girdwood <[email protected]>
2012-07-06ASoC: dapm: Mark widgets as dirty when a route is addedMark Brown1-0/+4
If we add a new route at runtime then we'll need to recheck the connections to the affected widgets. Signed-off-by: Mark Brown <[email protected]> Acked-by: Liam Girdwood <[email protected]>
2012-07-06ASoC: dpcm: Allow FE to be opened without valid BE routes.Liam Girdwood1-3/+1
Some userspace will open a PCM device and then configure mixers for routing before triggering. This patch allows userspace to do this sequence. Signed-off-by: Liam Girdwood <[email protected]> Signed-off-by: Mark Brown <[email protected]>
2012-07-06ASoC: twl6040: fix spelling mistakeSimon Wilson1-1/+1
Fix spelling mistake in "High-Performance" option of twl6040 power mode. Signed-off-by: Simon Wilson <[email protected]> Signed-off-by: Liam Girdwood <[email protected]> Signed-off-by: Mark Brown <[email protected]>
2012-07-06ASoC: dapm: Make sure all dapm contexts are updatedLiam Girdwood1-3/+3
Make sure we set the bias level for all DAPM contexts when changing level. Signed-off-by: Liam Girdwood <[email protected]> Signed-off-by: Mark Brown <[email protected]>
2012-07-06ASoC: pcm: Clean up logging in soc_new_pcm()Liam Girdwood1-4/+4
Use dev_ style logging throughout soc_new_pcm() Signed-off-by: Liam Girdwood <[email protected]> Signed-off-by: Mark Brown <[email protected]>
2012-07-06ASoC: dapm: Fix locking during codec shutdownLiam Girdwood1-0/+5
Codec shutdown performs a DAPM power sequence that might cause conflicts and/or race conditions if another stream power event is running simultaneously. Use card's dapm mutex to protect any potential race condition between them. Signed-off-by: Misael Lopez Cruz <[email protected]> Signed-off-by: Liam Girdwood <[email protected]> Signed-off-by: Mark Brown <[email protected]> Cc: [email protected]
2012-07-06ALSA: usb-audio: Fix the first PCM interface assignmentTakashi Iwai1-2/+2
In the new PCM streaming logic, the interface number is assigned to usb stream instance (subs->interface) after the format and rate setups are succeeded, but some codes are still passing subs->interface as the reference to helper functions. This leads to initializing with an invalid iface number (-1). This patch replaces the wrong references with the ones from the target fmt correctly. Signed-off-by: Takashi Iwai <[email protected]>
2012-07-05ASoC: wm1250-ev1: Flag all supported rates in the DAIMark Brown1-2/+5
Not previously noticed due to normal usage being with CODEC<->CODEC links. Signed-off-by: Mark Brown <[email protected]>
2012-07-05ASoC: wm5102: Allow routing through the ASRCsMark Brown1-1/+29
This enables common telephony use cases. Signed-off-by: Mark Brown <[email protected]>
2012-07-05ASoC: arizona: Enable ASYNCCLK domain for audio interfacesMark Brown1-6/+24
If an audio interface is configured to use ASYNCCLK then update the asynchronous sample rate rather than one of our primary sample rates. Signed-off-by: Mark Brown <[email protected]>
2012-07-05ASoC: imx-mc13783: Add audmux settings for mx27pdkFabio Estevam1-16/+33
mx27pdk board also has a mc13783 codec. Add support for it and do a run-time machine type check to perform the correct audiomux settings. Signed-off-by: Fabio Estevam <[email protected]> Signed-off-by: Mark Brown <[email protected]>
2012-07-05ASoC: fsl: remove unneeded AUDMUX register setting from imx-sgtl5000Hui Wang1-2/+1
If we don't set IMX_AUDMUX_V2_PTCR_TCLKDIR in the AUDMUX PTCR register (means Tx clock pin is input), we don't need to set IMX_AUDMUX_V2_PTCR_TCSEL as well. Since both i.MX35, i.MX51 and i.MX6 datasheet says "When Tx clock pin set as an input, the TCSEL settings are ignored". Signed-off-by: Hui Wang <[email protected]> Acked-by: Shawn Guo <[email protected]> Signed-off-by: Mark Brown <[email protected]>
2012-07-05ALSA: pcm: Make constraints lists constMark Brown1-2/+2
They aren't modified by the core so the drivers can declare them const. Signed-off-by: Mark Brown <[email protected]> Signed-off-by: Takashi Iwai <[email protected]>
2012-07-05ALSA: hda - Always call standard unsolicited event for Realtek codecsDavid Henningsson1-18/+3
With the model parsers out of the way, we have no custom unsol events to worry about, we can therefore simplify the code. In addition, this fixes a bug on the ASUS TC710, which has only a headphone jack and a mic jack, but no internal mic or speakers. Therefore the unsol_event pointer was not set, and as a result, the jack kcontrols were not correctly updated. BugLink: https://bugs.launchpad.net/bugs/1021192 Signed-off-by: David Henningsson <[email protected]> Signed-off-by: Takashi Iwai <[email protected]>
2012-07-04ASoC: arizona: Be more forgiving in BCLK selectionMark Brown1-1/+2
Allow any BCLK which can be divided down to generate LRCLK, not just the lowest possible BCLK to clock out the samples. Signed-off-by: Mark Brown <[email protected]>
2012-07-04ASoC: arizona: Implement AIF clock configurationMark Brown3-0/+118
Allow the user to select which of the system clocks each AIF is referenced to and constran the DAI to the set of frequencies which can be generated from that clock. Signed-off-by: Mark Brown <[email protected]>
2012-07-04ASoC: arizona: Rename current rates tables to bclk_ratesMark Brown1-6/+6
They're the rates for the BCLK, not for the sample rate, so rename so that we don't confuse ourselves. Signed-off-by: Mark Brown <[email protected]>
2012-07-04ASoC: dwc: Staticise non-exported i2s_start()Mark Brown1-1/+2
Signed-off-by: Mark Brown <[email protected]>
2012-07-04ASoC: SPEAr spdif_out: Add spdif out supportVipin Kumar2-0/+468
This patch implements the spdif out driver for ST peripheral. This peripheral implements IEC60958 standard Signed-off-by: Vipin Kumar <[email protected]> Signed-off-by: Rajeev Kumar <[email protected]> Signed-off-by: Mark Brown <[email protected]>
2012-07-04ASoC: STA529: Add support for STA529 Audio CodecRajeev Kumar3-0/+447
The STA529 is a digital stereo class-D audio amplifier. It includes an audio DSP, an ST proprietary high-efficiency class-D driver and CMOS power output stage. It is intended for high-efficiency digital-to-power-audio conversion for portable applications. Signed-off-by: Rajeev Kumar <[email protected]> Signed-off-by: Mark Brown <[email protected]>
2012-07-04ASoC: tlv320aic3x: extending registers cacheJiri Prchal1-1/+3
Adds missing register default values to cache. Signed-off-by: Jiri Prchal <[email protected]> Signed-off-by: Mark Brown <[email protected]>
2012-07-04ASoC: tlv320aic3x: add missing registers and bitsJiri Prchal1-1/+18
Adds register and bit shift definitions in header file. Changes are for TLV320AIC310x based on data sheet. Signed-off-by: Jiri Prchal <[email protected]> Signed-off-by: Mark Brown <[email protected]>
2012-07-04Merge branch 'topic/hda-beep' into topic/hdaTakashi Iwai9-87/+63
2012-07-03ASoC: wm8994: Don't suspend accessory detectionMark Brown1-37/+0
Leave it up to the machine driver to disable accessory detection if desired, the common pattern is to have accessory detection be a wake source. Signed-off-by: Mark Brown <[email protected]>
2012-07-03ASoC: core: Try to use regmap if the driver doesn't set up any I/OMark Brown1-0/+4
Since most new drivers are expected to use regmap and since frequently the only thing we need to do in the CODEC probe function is configure the I/O try to initialise the register I/O using regmap if the driver hasn't done so after probe(). Signed-off-by: Mark Brown <[email protected]> Acked-by: Liam Girdwood <[email protected]>
2012-07-03ASoC: wm8962: Log AIF configuration requested by hw_params()Mark Brown1-0/+3
Signed-off-by: Mark Brown <[email protected]>
2012-07-03ASoC: dapm: Fix dapm_set_path_status() connectBenoît Thébaudeau1-4/+3
dapm_set_path_status() sets connect incorrectly in the case max > 1 with invert. In that case, the raw disconnect value should be max, which corresponds to the userspace value 0. This use case currently does not appear upstream, but it could break SOC_DAPM_SINGLE() or SOC_DAPM_SINGLE_TLV() elsewhere or in the future. This patch completes commit 3a9abe8. Cc: Liam Girdwood <[email protected]> Cc: Mark Brown <[email protected]> Cc: <[email protected]> Signed-off-by: Benoît Thébaudeau <[email protected]> Signed-off-by: Mark Brown <[email protected]>
2012-07-03ASoC: tegra: use dmaengine based dma driverLaxman Dewangan3-1/+119
Use the dmaengine based Tegra APB DMA driver for data transfer between SPI fifo and memory in place of legacy Tegra APB DMA. Because generic soc-dmaengine-pcm uses the DMAs API based on dmaengine, using the exported APIs provided by this generic driver. The new driver is selected if legacy driver is not selected and new dma driver is enabled through config file. Signed-off-by: Laxman Dewangan <[email protected]> Acked-by: Stephen Warren <[email protected]> Tested-by: Stephen Warren <[email protected]> Signed-off-by: Mark Brown <[email protected]>
2012-07-03ASoC: dapm: Remove incomplete stereo codeBenoît Thébaudeau1-10/+12
Stereo is not yet supported by dapm widgets, so remove stereo code from snd_soc_dapm_get_volsw(), and warn if stereo controls are detected. Signed-off-by: Benoît Thébaudeau <[email protected]> Signed-off-by: Mark Brown <[email protected]>
2012-07-03ASoC: smdk_wm8994: Convert to use snd_soc_register_card()Sachin Kamat1-13/+23
Current method for machine driver to register with the ASoC core is to use snd_soc_register_card() instead of creating a "soc-audio" platform device. Signed-off-by: Sachin Kamat <[email protected]> Acked-by: Sangbeom Kim <[email protected]> Signed-off-by: Mark Brown <[email protected]>
2012-07-03Merge tag 'sound-3.5' of ↵Linus Torvalds4-3/+31
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "Just a few driver-specific fixes for ASoC and HD-audio." * tag 'sound-3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda - Fix no sound from ALC662 after Windows reboot ASoC: tlv320aic3x: Fix codec pll configure bug ASoC: wm2200: Add missing BCLK rate
2012-07-03ALSA: hda - Avoid possible race of beep on/offTakashi Iwai1-2/+3
Call cancel_work_sync() when turning off the beep switch so that the mute call is executed in a proper order. Signed-off-by: Takashi Iwai <[email protected]>
2012-07-03ALSA: hda - Get rid of superfluous beep->mode fieldTakashi Iwai2-9/+6
It's no longer necessary since beep_mode=2 option was dropped. It can be checked simply via codec->beep != NULL. Signed-off-by: Takashi Iwai <[email protected]>
2012-07-03ALSA: hda - Move beep helper functions to hda_beep.cTakashi Iwai3-20/+31
Move snd_hda_mixer_amp_switch_put_beep() to hda_beep.c as a clean up to remove one more ifdef. Also add the corresponding get callback to return consistently the digital beep state independently from the mixer amp value. Signed-off-by: Takashi Iwai <[email protected]>
2012-07-03ALSA: hda - Remove beep_mode=2Takashi Iwai4-47/+7
The beep_mode=2 option was introduced to make the beep mixer controlling the beep input allocation/deallocation dynamically, so that a user can switch between HD-audio codec digital beep and the system beep only via mixer API. This was necessary because the keyboard driver took only the first input beep instance at that time. However, the recent keyboard driver already processes the multiple input instances, thus there is no point to keep this mode. Let's remove it. Acked-by: Jaroslav Kysela <[email protected]> Signed-off-by: Takashi Iwai <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.