aboutsummaryrefslogtreecommitdiff
path: root/sound
AgeCommit message (Collapse)AuthorFilesLines
2021-08-24ASoC: mediatek: mt8195: add DPTX audio supportTrevor Wu2-5/+84
This patch adds DPTX audio support on mt8195-mt6359-rt1019-rt5682 board. Signed-off-by: Trevor Wu <trevor.wu@mediatek.com> Link: https://lore.kernel.org/r/20210819084144.18483-10-trevor.wu@mediatek.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-08-24ASoC: mediatek: mt8195: add machine driver with mt6359, rt1019 and rt5682Trevor Wu3-0/+994
This patch adds support for mt8195 board with mt6359, rt1019 and rt5682. Signed-off-by: Trevor Wu <trevor.wu@mediatek.com> Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/r/20210819084144.18483-9-trevor.wu@mediatek.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-08-24ASoC: mediatek: mt8195: add platform driverTrevor Wu8-0/+6807
This patch adds mt8195 platform and affiliated driver. Signed-off-by: Trevor Wu <trevor.wu@mediatek.com> Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/r/20210819084144.18483-7-trevor.wu@mediatek.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-08-24ASoC: mediatek: mt8195: support pcm in platform driverTrevor Wu1-0/+389
This patch adds mt8195 pcm dai driver. Signed-off-by: Trevor Wu <trevor.wu@mediatek.com> Link: https://lore.kernel.org/r/20210819084144.18483-6-trevor.wu@mediatek.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-08-24ASoC: mediatek: mt8195: support adda in platform driverTrevor Wu1-0/+830
This patch adds mt8195 adda dai driver. audio_h clock is used by ADSP bus and ADDA module. When ADDA requires audio_h clock, it is switched to APLL1, otherwise it is switched to Xtal_26m so that APLL1 can be turned off when audio feature is not used. ADSP bus only requires that the clock is on, so dynamic reparenting is used for the purpose of lowering power consumption. Signed-off-by: Trevor Wu <trevor.wu@mediatek.com> Link: https://lore.kernel.org/r/20210819084144.18483-5-trevor.wu@mediatek.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-08-24ASoC: mediatek: mt8195: support etdm in platform driverTrevor Wu1-0/+2639
This patch adds mt8195 tdm/i2s dai driver. MCLK clock tree is as follows. PLL -> MUX -> DIVIDER -> MCLK For PLL source of MCLK, driver only supports APLL1 and APLL2 now. APLL3 and APLL4 are used to track external clock source, so they are only used when slave input is connected. For example, case 1: (HDMI RX connected) DL memif (a1sys) -> etdm out2 (clk from apll1/apll2) -> codec case 2: (HDMI RX disconnected) HDMI RX -> a3sys -> UL memif (a3sys) -> DL memif (a3sys) -> .... -> etdm out2 (clk from apll3) -> codec We keep all modules in the pipeline working on the same clock domain. MCLK is expected to output the clock generated from the same clock source as the pipeline, so dynamic reparenting is required for MCLK configuration. As a result, clk_set_parent() is used to select PLL source, and clk_set_rate() is used to configure divider to get MCLK output rate. Signed-off-by: Trevor Wu <trevor.wu@mediatek.com> Link: https://lore.kernel.org/r/20210819084144.18483-4-trevor.wu@mediatek.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-08-24ASoC: mediatek: mt8195: support audsys clock controlTrevor Wu3-0/+322
This patch adds mt8195 audio cg control. Audio clock gates are registered to CCF for reference count and clock parent management. Signed-off-by: Trevor Wu <trevor.wu@mediatek.com> Link: https://lore.kernel.org/r/20210819084144.18483-3-trevor.wu@mediatek.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-08-24ASoC: mediatek: mt8195: update mediatek common driverTrevor Wu2-5/+27
Update mediatek common driver to support MT8195 Signed-off-by: Trevor Wu <trevor.wu@mediatek.com> Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/r/20210819084144.18483-2-trevor.wu@mediatek.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-08-24ASoC: wm_adsp: Put debugfs_remove_recursive back inCharles Keepax1-0/+2
This patch reverts commit acbf58e53041 ("ASoC: wm_adsp: Let soc_cleanup_component_debugfs remove debugfs"), and adds an alternate solution to the issue. That patch removes the call to debugfs_remove_recursive, which cleans up the DSPs debugfs. The intention was to avoid an unbinding issue on an out of tree driver/platform. The issue with the patch is it means the driver no longer cleans up its own debugfs, instead relying on ASoC to remove recurive on the parent debugfs node. This is conceptually rather unclean, but also it would prevent DSPs being added/removed independently of ASoC and soon we are going to be upstreaming some non-audio parts with these DSPs, which will require this. Finally, it seems the issue on the platform is a result of the wm_adsp2_cleanup_debugfs getting called twice. This is very likely a problem on the platform side and will be resolved there. But in the mean time make the code a little more robust to such issues, and again conceptually a bit nicer, but clearing the debugfs_root variable in the DSP structure when the debugfs is removed. Fixes: acbf58e53041 ("ASoC: wm_adsp: Let soc_cleanup_component_debugfs remove debugfs" Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20210824101552.1119-1-ckeepax@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-08-24Merge tag 'soundwire-5.15-rc1' of ↵Greg Kroah-Hartman10-1/+597
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire into char-misc-next Vinod writes: soundwire updates for 5.15-rc1 - Core has updates to support SoundWire mockup device (includes tag from asoc), improved error handling and slave status. - Drivers has update on Intel driver for new quriks and better handling of errors and suspend routines * tag 'soundwire-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire: soundwire: cadence: do not extend reset delay soundwire: intel: conditionally exit clock stop mode on system suspend soundwire: intel: skip suspend/resume/wake when link was not started soundwire: intel: fix potential race condition during power down soundwire: cadence: override PDI configurations to create loopback soundwire: cadence: add debugfs interface for PDI loopbacks soundwire: stream: don't program mockup device ports soundwire: bus: squelch error returned by mockup devices soundwire: add flag to ignore all command/control for mockup devices soundwire: stream: don't abort bank switch on Command_Ignored/-ENODATA soundwire: cadence: add paranoid check on self-clearing bits soundwire: dmi-quirks: add quirk for Intel 'Bishop County' NUC M15 soundwire: bus: update Slave status in sdw_clear_slave_status soundwire: cadence: Remove ret variable from sdw_cdns_irq() soundwire: bus: filter out more -EDATA errors on clock stop soundwire: dmi-quirks: add ull suffix for SoundWire _ADR values ASoC: Intel: boards: sof_sdw: add SoundWire mockup codecs for tests ASoC: soc-acpi: tgl: add table for SoundWire mockup devices ASoC: soc-acpi: cnl: add table for SoundWire mockup devices ASoC: codecs: add SoundWire mockup device support
2021-08-24ALSA: usb-audio: Move set-interface-first workaround into common quirkTakashi Iwai3-4/+7
The recent quirk for WALKMAN (commit 7af5a14371c1: "ALSA: usb-audio: Fix regression on Sony WALKMAN NW-A45 DAC") may be required for other devices and is worth to be put into the common quirk flags. This patch adds a new quirk flag bit QUIRK_FLAG_SET_IFACE_FIRST and a quirk table entry for the device. Link: https://lore.kernel.org/r/20210824055720.9240-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-08-24Merge branch 'for-linus' into for-nextTakashi Iwai2-0/+6
2021-08-24ALSA: hda/realtek: Quirk for HP Spectre x360 14 amp setupJohnathon Clark1-0/+1
This patch extends support for the HP Spectre x360 14 amp enable quirk to support a model of the device with an additional subdevice ID. Signed-off-by: Johnathon Clark <john.clark@cantab.net> Link: https://lore.kernel.org/r/20210823162110.8870-1-john.clark@cantab.net Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-08-24ALSA: usb-audio: Fix regression on Sony WALKMAN NW-A45 DACTakashi Iwai1-0/+5
We've got a regression report for USB-audio with Sony WALKMAN NW-A45 DAC device where no sound is audible on recent kernel. The bisection resulted in the code change wrt endpoint management, and the further debug session revealed that it was caused by the order of the USB audio interface. In the earlier code, we always set up the USB interface at first before other setups, but it was changed to be done at the last for UAC2/3, which is more standard way, while keeping the old way for UAC1. OTOH, this device seems requiring the setup of the interface at first just like UAC1. This patch works around the regression by applying the interface setup specifically for the WALKMAN at the beginning of the endpoint setup procedure. This change is written straightforwardly to be easily backported in old kernels. A further cleanup to move the workaround into a generic quirk section will follow in a later patch. Fixes: bf6313a0ff76 ("ALSA: usb-audio: Refactor endpoint management") Cc: <stable@vger.kernel.org> BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=214105 Link: https://lore.kernel.org/r/20210824054700.8236-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-08-23Merge series "ASoC: Intel: Skylake: Fix and support complex" from Cezary ↵Mark Brown5-190/+226
Rojewski <cezary.rojewski@intel.com>: Existing skylake-driver supports very basic scenarios with limited range of modules and their control. Attached changes first fix code as several advanced configurations are 'mentioned' throughout the files but are not actually functional. Follow up are changes adding missing support for said configurations. Cezary Rojewski (5): ASoC: Intel: kbl_da7219_max98927: Fix format selection for max98373 ASoC: Intel: Skylake: Leave data as is when invoking TLV IPCs ASoC: Intel: Skylake: Fix module resource and format selection ASoC: Intel: Skylake: Fix module configuration for KPB and MIXER ASoC: Intel: Skylake: Select first entry for singular pipe config arrays Gustaw Lewandowski (2): ASoC: Intel: Skylake: Fix passing loadable flag for module ASoC: Intel: Skylake: Simplify m_state for loadable modules Kareem Shaik (1): ASoC: Intel: Skylake: Support multiple format configs Pawel Harlozinski (1): ASoC: Intel: Skylake: Properly configure modules with generic extension Piotr Maziarz (1): ASoC: Intel: Skylake: Select proper format for NHLT blob Szymon Mielczarek (1): ASoC: Intel: Skylake: Support modules with generic extension include/uapi/sound/snd_sst_tokens.h | 6 +- sound/soc/intel/boards/kbl_da7219_max98927.c | 55 +------ sound/soc/intel/skylake/skl-messages.c | 155 ++++++++++++------- sound/soc/intel/skylake/skl-pcm.c | 25 ++- sound/soc/intel/skylake/skl-topology.c | 155 +++++++++++-------- sound/soc/intel/skylake/skl-topology.h | 26 +++- 6 files changed, 231 insertions(+), 191 deletions(-) -- 2.25.1
2021-08-23ASoC: rt1015: remove possible unused variable `bclk_ms'Tzung-Bi Shih1-5/+2
bclk_ms is possible unused by using the given config (see [1]). sound/soc/codecs/rt1015.c:724:2: warning: Value stored to 'bclk_ms' is never read [clang-analyzer-deadcode.DeadStores] bclk_ms = frame_size > 32; ^ ~~~~~~~~~~~~~~~ In addition, bclk_ms is meaningless and confusing after applying commit a5db2ca51367 ("ASoC: rt1015: remove unneeded variables in rt1015_priv"). The "> 32" in the expression looks like a typo but it was not. Let's remove the confusing variable bclk_ms. [1]: https://lkml.org/lkml/2021/8/23/305 Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Tzung-Bi Shih <tzungbi@google.com> Link: https://lore.kernel.org/r/20210823153323.1297723-1-tzungbi@google.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-08-23ASoC: Intel: bytcr_rt5640: Mark hp_elitepad_1000g2_jack?_check functions staticHans de Goede1-2/+2
The byt_rt5640_hp_elitepad_1000g2_jack?_check functions are only used inside bytcr_rt5640.c, mark them as static. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20210823110432.64860-1-hdegoede@redhat.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-08-23ASoC: ics43432: add CMM-4030D-261 supportAngelo Dureghello2-2/+4
Despite minimal datasheet differences, the driver seems perfectly compatible with CMM-4030D-261. Tested CMM-4030D-261 to work with this changes: / { cmm4030d: cmm4030d { #sound-dai-cells = <0>; compatible = "cui,cmm-4030d-261"; }; sound_mic { compatible = "simple-audio-card"; simple-audio-card,name = "i2s mem mic"; simple-audio-card,format = "i2s"; simple-audio-card,bitclock-master = <&sound_master>; simple-audio-card,frame-master = <&sound_master>; sound_master: simple-audio-card,cpu { sound-dai = <&ssi2>; system-clock-frequency = <2822400>; }; simple-audio-card,codec { sound-dai = <&cmm4030d>; }; }; }; Audio has been captured and tested successfully by: arecord -D "hw:1,0" -f S24_LE > test.wav aplay test.wav Signed-off-by: Angelo Dureghello <angelo.dureghello@timesys.com> Link: https://lore.kernel.org/r/20210821082658.4147595-1-angelo.dureghello@timesys.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-08-23ASoC: Intel: Skylake: Select first entry for singular pipe config arraysCezary Rojewski1-2/+3
When pipe does not expose multiple configuration options, always select the first entry without searching for matching one. Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com> Tested-by: Lukasz Majczak <lma@semihalf.com> Link: https://lore.kernel.org/r/20210818075742.1515155-12-cezary.rojewski@intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-08-23ASoC: Intel: Skylake: Properly configure modules with generic extensionPawel Harlozinski1-36/+15
Make use of struct skl_base_cfg_ext and its format setter to configure modules which are described with said structure. Signed-off-by: Gustaw Lewandowski <gustaw.lewandowski@linux.intel.com> Signed-off-by: Pawel Harlozinski <pawel.harlozinski@linux.intel.com> Signed-off-by: Szymon Mielczarek <szymonx.mielczarek@intel.com> Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com> Tested-by: Lukasz Majczak <lma@semihalf.com> Link: https://lore.kernel.org/r/20210818075742.1515155-11-cezary.rojewski@intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-08-23ASoC: Intel: Skylake: Support modules with generic extensionSzymon Mielczarek2-13/+84
Some DSP modules require, besides the module base configuration, a generic extension containing audio format for all module's pins that are in use. Signed-off-by: Gustaw Lewandowski <gustaw.lewandowski@linux.intel.com> Signed-off-by: Szymon Mielczarek <szymonx.mielczarek@intel.com> Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com> Tested-by: Lukasz Majczak <lma@semihalf.com> Link: https://lore.kernel.org/r/20210818075742.1515155-10-cezary.rojewski@intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-08-23ASoC: Intel: Skylake: Support multiple format configsKareem Shaik3-46/+77
A module can have two kinds of set params, as per topology requirements. For example, one pre-init and one post-init. But currently, there is support for just one type, as the format_config. This patch extends the format_configs to 4, so as to be able to support pre-init, post-init and post-bind type of set params, for the same module, simultaneously. Signed-off-by: Kareem Shaik <kareem.m.shaik@intel.com> Signed-off-by: Gustaw Lewandowski <gustaw.lewandowski@linux.intel.com> Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com> Tested-by: Lukasz Majczak <lma@semihalf.com> Link: https://lore.kernel.org/r/20210818075742.1515155-9-cezary.rojewski@intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-08-23ASoC: Intel: Skylake: Simplify m_state for loadable modulesGustaw Lewandowski2-8/+3
States SKL_MODULE_LOADED and SKL_MODULE_UNLOADED are redundant with 'loadable' flag in struct skl_module. Additionally skl_tplg_mixer_dapm_post_pmd_event() sets m_state always to SKL_MODULE_UNINIT so next unload function isn't called for such modules. Signed-off-by: Gustaw Lewandowski <gustaw.lewandowski@linux.intel.com> Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com> Tested-by: Lukasz Majczak <lma@semihalf.com> Link: https://lore.kernel.org/r/20210818075742.1515155-8-cezary.rojewski@intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-08-23ASoC: Intel: Skylake: Fix passing loadable flag for moduleGustaw Lewandowski1-16/+9
skl_get_module_info() tries to set mconfig->module->loadable before mconfig->module has been assigned thus flag was always set to false and driver did not try to load module binaries. Signed-off-by: Gustaw Lewandowski <gustaw.lewandowski@linux.intel.com> Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com> Tested-by: Lukasz Majczak <lma@semihalf.com> Link: https://lore.kernel.org/r/20210818075742.1515155-7-cezary.rojewski@intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-08-23ASoC: Intel: Skylake: Fix module configuration for KPB and MIXERCezary Rojewski1-2/+9
KeyPhrasebuffer, Mixin and Mixout modules configuration is described by firmware's basic module configuration structure. There are no extended parameters required. Update functions taking part in building INIT_INSTANCE IPC payload to reflect that. Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com> Tested-by: Lukasz Majczak <lma@semihalf.com> Link: https://lore.kernel.org/r/20210818075742.1515155-6-cezary.rojewski@intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-08-23ASoC: Intel: Skylake: Fix module resource and format selectionCezary Rojewski1-9/+10
Module configuration may differ between its instances depending on resources required and input and output audio format. Available parameters to select from are stored in module resource and interface (format) lists. These come from topology, together with description of each of pipe's modules. Ignoring index value provided by topology and relying always on 0th entry leads to unexpected module behavior due to under/overbudged resources assigned or impropper format selection. Fix by taking entry at index specified by topology. Fixes: f6fa56e22559 ("ASoC: Intel: Skylake: Parse and update module config structure") Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com> Tested-by: Lukasz Majczak <lma@semihalf.com> Link: https://lore.kernel.org/r/20210818075742.1515155-5-cezary.rojewski@intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-08-23ASoC: Intel: Skylake: Select proper format for NHLT blobPiotr Maziarz1-8/+13
Use actual pipeline format, not PCM format for blob selection. Otherwise selected blobs are not correct in pipelines with format conversion e.g.: SRC module. Signed-off-by: Piotr Maziarz <piotrx.maziarz@linux.intel.com> Signed-off-by: Lewandowski, Gustaw <gustaw.lewandowski@linux.intel.com> Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com> Tested-by: Lukasz Majczak <lma@semihalf.com> Link: https://lore.kernel.org/r/20210818075742.1515155-4-cezary.rojewski@intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-08-23ASoC: Intel: Skylake: Leave data as is when invoking TLV IPCsCezary Rojewski1-6/+0
Advancing pointer initially fixed issue for some users but caused regression for others. Leave data as it to make it easier for end users to adjust their topology files if needed. Fixes: a8cd7066f042 ("ASoC: Intel: Skylake: Strip T and L from TLV IPCs") Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com> Tested-by: Lukasz Majczak <lma@semihalf.com> Link: https://lore.kernel.org/r/20210818075742.1515155-3-cezary.rojewski@intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-08-23ASoC: Intel: kbl_da7219_max98927: Fix format selection for max98373Cezary Rojewski1-48/+7
Contrary to what is said in board's file, topology targeting kbl_da7219_max98373 expects format 16b, not 24/32b. Partially revert changes added in 'ASoC: Intel: Boards: Add Maxim98373 support' to bring old behavior back, aligning with topology expectations. Fixes: 716d53cc7837 ("ASoC: Intel: Boards: Add Maxim98373 support") Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com> Tested-by: Lukasz Majczak <lma@semihalf.com> Link: https://lore.kernel.org/r/20210818075742.1515155-2-cezary.rojewski@intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-08-23ASoC: intel: atom: Revert PCM buffer address setup workaround againTakashi Iwai1-1/+1
We worked around the breakage of PCM buffer setup by the commit 65ca89c2b12c ("ASoC: intel: atom: Fix breakage for PCM buffer address setup"), but this isn't necessary since the CONTINUOUS buffer type also sets runtime->dma_addr since commit f84ba106a018 ("ALSA: memalloc: Store snd_dma_buffer.addr for continuous pages, too"). Let's revert the change again. Link: https://lore.kernel.org/r/20210822072127.9786-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-08-23Merge branch 'for-linus' into for-nextTakashi Iwai2-3/+20
2021-08-23ALSA: hda: Allow model option to specify PCI SSID aliasTakashi Iwai1-0/+13
There are tons of quirks for HD-audio and many of them are without model string, hence it's not trivial to apply the same quirk for a new device. This patch makes it easier: namely, the model string accepts a form as "XXXX:YYYY" (a pair of hex numbers of the subsystem-vendor and subsystem-device IDs), to specify the alias of PCI (or codec) SSID. e.g. passing model=1234:abcd would apply the quirk that matches with the given SSID 1234:abcd instead of the actual SSID. Link: https://lore.kernel.org/r/20210823073722.14873-3-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-08-23ALSA: hda: Code refactoring snd_hda_pick_fixup()Takashi Iwai1-37/+38
This contains a slight code refactoring of snd_hda_pick_fixup(): - Unify the ID setup - Unify the debug print message - Use snd_pci_quirk_lookup_id() for the codec SSID matching Mostly for simplifying the code flow but also it makes easier to add the codec alias handling in the upcoming patch. Link: https://lore.kernel.org/r/20210823073722.14873-2-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-08-23ALSA: firewire-motu: add support for MOTU 896HDTakashi Sakamoto3-4/+20
Mark of the Unicorn (MOTU) shipped 896HD 2003 as one of models in second generation of its FireWire series, and already discontinued it. The model consists of below ICs: * Texas Instruments TSB41AB2 * Phillips Semiconductors PDI1394L40 * Altera cyclone EP1C3 * Texas Instruments TMS320VC5402 It supports sampling transmission frequency up to 192.0 kHz. The packet format differs depending on both of sampling transfer frequency and enabling ADAT channels. The model doesn't support MIDI message transmission. This commit adds support for it. $ python3 crpp < /sys/bus/firewire/devices/fw1/config_rom ROM header and bus information block ----------------------------------------------------------------- 400 04101b66 bus_info_length 4, crc_length 16, crc 7014 404 31333934 bus_name "1394" 408 20001000 irmc 0, cmc 0, isc 1, bmc 0, cyc_clk_acc 0, max_rec 1 (4) 40c 0001f200 company_id 0001f2 | 410 0001dbce device_id 000001dbce | EUI-64 0001f2000001dbce root directory ----------------------------------------------------------------- 414 0004c65c directory_length 4, crc 50780 418 030001f2 vendor 41c 0c0083c0 node capabilities per IEEE 1394 420 8d000006 --> eui-64 leaf at 438 424 d1000001 --> unit directory at 428 unit directory at 428 ----------------------------------------------------------------- 428 0003dcc1 directory_length 3, crc 56513 42c 120001f2 specifier id 430 13000005 version 434 17102800 model eui-64 leaf at 438 ----------------------------------------------------------------- 438 000264f2 leaf_length 2, crc 25842 43c 0001f200 company_id 0001f2 | 440 0001dbce device_id 000001dbce | EUI-64 0001f2000001dbce Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20210823085741.33864-1-o-takashi@sakamocchi.jp Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-08-23ALSA: hda/realtek: Workaround for conflicting SSID on ASUS ROG Strix G17Takashi Iwai1-0/+10
ASUS ROG Strix G17 has the very same PCI and codec SSID (1043:103f) as ASUS TX300, and unfortunately, the existing quirk for TX300 is broken on ASUS ROG. Actually the device works without the quirk, so we'll need to clear the quirk before applying for this device. Since ASUS ROG has a different codec (ALC294 - while TX300 has ALC282), this patch adds a workaround for the device, just clearing the codec->fixup_id by checking the codec vendor_id. It's a bit ugly to add such a workaround there, but it seems to be the simplest way. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=214101 Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210820143214.3654-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-08-20Merge tag 'sound-5.14-rc7-2' of ↵Linus Torvalds2-3/+10
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull more sound fixes from Takashi Iwai: "This is a quick follow up for 5.14: a fix for a very recently introduced regression on ASoC Intel Atom driver, and another trivial HD-audio quirk for HP laptops" * tag 'sound-5.14-rc7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ASoC: intel: atom: Fix breakage for PCM buffer address setup ALSA: hda/realtek: Limit mic boost on HP ProBook 445 G8
2021-08-20Merge series "ASoC: Intel/rt5640: Add support for HP Elite Pad 1000G2 ↵Mark Brown3-66/+234
jack-detect" from Hans de Goede <hdegoede@redhat.com>: Changes in v2: - Rebase on asoc/for-next - New patch: "ASoC: Intel: bytct_rt5640: Add a separate "Headset Mic 2" DAPM pin for the mic on the 2nd jack" - Addressed Pierre-Louis' comments about calling acpi_dev_add_driver_gpios() twice Original cover-letter: The HP Elitepad 1000 G2 tablet has 2 headset jacks: 1. on the dock which uses the output of the codecs built-in HP-amp + the standard IN2 input which is always used with the headset-jack. 2. on the tablet itself, this uses the line-out of the codec + an external HP-amp, which gets enabled by the ALC5642 codec's GPIO1 pin; and IN1 for the headset-mic. The codec's GPIO1 is also its only IRQ output pin, so this means that the codec's IRQ cannot be used on this tablet. Instead the jack-detect is connected directly to GPIOs on the main SoC. The dock has a helper chip which also detects if a headset-mic is present or not, so there are 2 GPIOs for the jack-detect status of the dock. The tablet jack uses a single GPIO which indicates if a jack is present or not. Differentiating between between headphones vs a headset on the tablet jack is done by using the usual mic-bias over-current-detection mechanism. Regards, Hans Hans de Goede (6): ASoC: rt5640: Move rt5640_disable_jack_detect() up in the rt5640.c file ASoC: rt5640: Delay requesting IRQ until the machine-drv calls set_jack ASoC: rt5640: Add optional hp_det_gpio parameter to rt5640_detect_headset() ASoC: rt5640: Add rt5640_set_ovcd_params() helper ASoC: Intel: bytct_rt5640: Add a separate "Headset Mic 2" DAPM pin for the mic on the 2nd jack ASoC: Intel: bytcr_rt5640: Add support for HP Elite Pad 1000G2 jack-detect sound/soc/codecs/rt5640.c | 136 ++++++++++++---------- sound/soc/codecs/rt5640.h | 6 + sound/soc/intel/boards/bytcr_rt5640.c | 158 +++++++++++++++++++++++++- 3 files changed, 234 insertions(+), 66 deletions(-) -- 2.31.1
2021-08-20ASoC: rsnd: adg: clearly handle clock error / NULL caseKuninori Morimoto1-6/+6
This driver is assuming that all adg->clk[i] is not NULL. Because of this prerequisites, for_each_rsnd_clk() is possible to work for all clk without checking NULL. In other words, all adg->clk[i] should not NULL. Some SoC might doesn't have clk_a/b/c/i. devm_clk_get() returns error in such case. This driver calls rsnd_adg_null_clk_get() and use null_clk instead of NULL in such cases. But devm_clk_get() might returns NULL even though such clocks exist, but it doesn't mean error (user deliberately chose to disable the feature). NULL clk itself is not error from clk point of view, but is error from this driver point of view because it is not assuming such case. But current code is using IS_ERR() which doesn't care NULL. This driver uses IS_ERR_OR_NULL() instead of IS_ERR() for clk check. And it uses ERR_CAST() to clarify null_clk error. One concern here is that it unconditionally uses null_clk if clk_a/b/c/i was error. It is correct if it doesn't exist, but is not correct if it returns error even though it exist. It needs to check "clock-names" from DT before calling devm_clk_get() to handling such case. But let's assume it is overkill so far. Link: https://lore.kernel.org/r/YMCmhfQUimHCSH/n@mwanda Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87v940wyf9.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-08-20ASoC: rsnd: core: make some arrays static const, makes object smallerKuninori Morimoto1-3/+3
Don't populate arrays on the stack but instead them static const. Makes the object code smaller by 48 bytes. Before: text data bss dec hex filename 20938 916 104 21958 55c6 ./sound/soc/sh/rcar/core.o After: text data bss dec hex filename 20890 916 104 21910 5596 ./sound/soc/sh/rcar/core.o gcc version 11.1.0) Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87tujkwydx.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-08-19ASoC: Intel: bytcr_rt5640: Add support for HP Elite Pad 1000G2 jack-detectHans de Goede1-2/+144
The HP Elitepad 1000 G2 tablet has 2 headset jacks: 1. on the dock which uses the output of the codecs built-in HP-amp + the standard IN2 input which is always used with the headset-jack. 2. on the tablet itself, this uses the line-out of the codec + an external HP-amp, which gets enabled by the ALC5642 codec's GPIO1 pin; and IN1 for the headset-mic. The codec's GPIO1 is also its only IRQ output pin, so this means that the codec's IRQ cannot be used on this tablet. Instead the jack-detect is connected directly to GPIOs on the main SoC. The dock has a helper chip which also detects if a headset-mic is present or not, so there are 2 GPIOs for the jack-detect status of the dock. The tablet jack uses a single GPIO which indicates if a jack is present or not. Differentiating between headphones vs a headset on the tablet jack is done by using the usual mic-bias over-current-detection mechanism. Add support for this unique setup, this support gets enabled on this tablet through a new BYT_RT5640_JD_HP_ELITEP_1000G2 quirk. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=213415 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20210819190543.784415-7-hdegoede@redhat.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-08-19ASoC: Intel: bytct_rt5640: Add a separate "Headset Mic 2" DAPM pin for the ↵Hans de Goede1-2/+10
mic on the 2nd jack In order to be able to do jack-detection reporting for the mic contact on the 2nd jack found on some devices, the DAPM topology needs to have a separate DAPM pin/input for that microphone, instead of re-using the "Internal Mic" pin which is normally used together with the IN1P input of the codec. Using the "Internal Mic" dapm-pin-switch for this in a snd_soc_jack_pin to report hotplug events causes the "Internal Mic" pin to get deactivated when unplugging a headset from the 2nd jack, thus turning off the actual Internal Mic (typically a pair of digital mics on devices with 2 jacks). Fixes: 79c1123bac3b ("ASoC: Intel: bytcr_rt5640: Add support for a second headset mic input") Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20210819190543.784415-6-hdegoede@redhat.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-08-19ASoC: rt5640: Add rt5640_set_ovcd_params() helperHans de Goede2-20/+34
Some devices don't use the builtin jack-detect but can still benefit from the mic-bias-current over-current-detection to differentiate between headphones vs a headset. Move the ovcd init code from rt5640_enable_jack_detect() into a new rt5640_set_ovcd_params() helper and export this helper as well as a couple of related ovcd functions. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20210819190543.784415-5-hdegoede@redhat.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-08-19ASoC: rt5640: Add optional hp_det_gpio parameter to rt5640_detect_headset()Hans de Goede2-4/+12
Some devices don't use the builtin jack-detect but can still benefit from the mic-bias-current over-current-detection headphones vs headset detection done by rt5640_detect_headset(). In this case the jack-inserted check done by rt5640_detect_headset() needs to be done through a GPIO rather then by using the codec's builtin jack-detect. Add an optional hp_det_gpio parameter and export rt5640_detect_headset() for use on machines where jack-detect is handled outside of the codec. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20210819190543.784415-4-hdegoede@redhat.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-08-19ASoC: rt5640: Delay requesting IRQ until the machine-drv calls set_jackHans de Goede1-17/+13
Delay requesting the IRQ until the machine-drv calls set_jack. The main reason for this is that the codec's IRQ is unused on some boards, in which case we really should not call request_irq at all. On some boards there is an IRQ listed at index 0 for the codec, but this is not connected to the codec, but rather is directly connected to the jack's jack-detect pin. These special setups will be handled by the machine-driver, but the machine driver can only request the IRQ if it is not first requested by the codec driver. Moving the request_irq to the set_jack callback (which will not get called in this case) avoids the codec-driver clobbering the IRQ. Moving the request_irq also removes the need to disable the IRQ immediately after requesting it, avoiding a small race (this could also have been fixed by using the new IRQF_NO_AUTOEN flag when requesting the IRQ). Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20210819190543.784415-3-hdegoede@redhat.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-08-19ASoC: rt5640: Move rt5640_disable_jack_detect() up in the rt5640.c fileHans de Goede1-23/+23
Move rt5640_disable_jack_detect() to above rt5640_enable_jack_detect(). This is a preparation patch for reworking how the IRQ gets requested. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20210819190543.784415-2-hdegoede@redhat.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-08-19ASoC: uniphier: make arrays mul and div static const, makes object smallerColin Ian King1-2/+2
Don't populate the arrays mul and div on the stack but instead make them static const. Makes the object code smaller by 4 bytes. Before: text data bss dec hex filename 16226 4984 64 21274 531a ./sound/soc/uniphier/aio-cpu.o After: text data bss dec hex filename 16062 5144 64 21270 5316 ./sound/soc/uniphier/aio-cpu.o (gcc version 10.2.0) Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Link: https://lore.kernel.org/r/20210818151746.38520-1-colin.king@canonical.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-08-19ASoC: sh: rz-ssi: Improve error handling in rz_ssi_dma_request functionBiju Das1-2/+13
dma_request_chan() returns error pointer in case of failures, but the rz_ssi_dma_request() checked for NULL pointer instead. This patch fixes the issue by checking for ERR_PTR() instead of NULL and sets the DMA pointers to NULL in error case so that ssi can fallback to PIO mode. Fixes: 26ac471c5354 ("ASoC: sh: rz-ssi: Add SSI DMAC support") Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://lore.kernel.org/r/20210818101450.15948-1-biju.das.jz@bp.renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-08-19ASoC: intel: atom: Fix breakage for PCM buffer address setupTakashi Iwai1-1/+1
The commit 2e6b836312a4 ("ASoC: intel: atom: Fix reference to PCM buffer address") changed the reference of PCM buffer address to substream->runtime->dma_addr as the buffer address may change dynamically. However, I forgot that the dma_addr field is still not set up for the CONTINUOUS buffer type (that this driver uses) yet in 5.14 and earlier kernels, and it resulted in garbage I/O. The problem will be fixed in 5.15, but we need to address it quickly for now. The fix is to deduce the address again from the DMA pointer with virt_to_phys(), but from the right one, substream->runtime->dma_area. Fixes: 2e6b836312a4 ("ASoC: intel: atom: Fix reference to PCM buffer address") Reported-and-tested-by: Hans de Goede <hdegoede@redhat.com> Cc: <stable@vger.kernel.org> Acked-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/2048c6aa-2187-46bd-6772-36a4fb3c5aeb@redhat.com Link: https://lore.kernel.org/r/20210819152945.8510-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-08-19ALSA: hda/realtek: Limit mic boost on HP ProBook 445 G8Kai-Heng Feng1-2/+9
The mic has lots of noises if mic boost is enabled. So disable mic boost to get crystal clear audio capture. Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210818144119.121738-1-kai.heng.feng@canonical.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-08-19isystem: trim/fixup stdarg.h and other headersAlexey Dobriyan3-3/+0
Delete/fixup few includes in anticipation of global -isystem compile option removal. Note: crypto/aegis128-neon-inner.c keeps <stddef.h> due to redefinition of uintptr_t error (one definition comes from <stddef.h>, another from <linux/types.h>). Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Powered by cgit, Gruvboxed by Blaster4385.