aboutsummaryrefslogtreecommitdiff
path: root/sound
AgeCommit message (Collapse)AuthorFilesLines
2023-08-23ASoC: cs42l43: Initialize ret in default case in cs42l43_pll_ev()Nathan Chancellor1-0/+1
clang warns (or errors with CONFIG_WERROR=y): sound/soc/codecs/cs42l43.c:1371:2: error: variable 'ret' is used uninitialized whenever switch default is taken [-Werror,-Wsometimes-uninitialized] 1371 | default: | ^~~~~~~ sound/soc/codecs/cs42l43.c:1377:9: note: uninitialized use occurs here 1377 | return ret; | ^~~ sound/soc/codecs/cs42l43.c:1349:9: note: initialize the variable 'ret' to silence this warning 1349 | int ret; | ^ | = 0 1 error generated. Initialize ret to 0 in the default case, as there was nothing to do for other event types. Closes: https://github.com/ClangBuiltLinux/linux/issues/1922 Fixes: fc918cbe874e ("ASoC: cs42l43: Add support for the cs42l43") Signed-off-by: Nathan Chancellor <nathan@kernel.org> Link: https://lore.kernel.org/r/20230823-cs42l43_pll_ev-init-ret-v1-1-5836f1ad5dad@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org>
2023-08-23Add I2S support for the StarFive JH7110 SoCMark Brown2-22/+285
Merge series from Xingyu Wu <xingyu.wu@starfivetech.com>: This patch series adds I2S support for the StarFive JH7110 RISC-V SoC based on Designware I2S controller. There has three I2S channels (RX/TX0/TX1) on the JH7110 SoC, one of which is for record(RX) and two for playback(TX). The first patch adds support for the StarFive JH7110 SoC in the Designware I2S bindings. The second patch adds the ops to get data from platform bus in the I2S driver. The third patch adds support for the StarFive JH7110 SoC in the Designware I2S driver. The fourth patch fixes the name of I2STX1 pinmux. The last patch adds device node of I2S RX/TX0/TX1 in JH7110 dts. This patch series is based on Linux-next(20230818) which is merge clock, syscon and dma nodes for the StarFive JH7110 SoC. The series has been tested and works normally on the VisionFive 2 board by plugging an audio expansion board.
2023-08-23ASoC: rsnd: tidyup ADGMark Brown1-13/+55
Merge series from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>: Renesas Sound has ADG for clock control. Basically it needs accurately divisible external input clock. But sometimes sometimes it doesn't have to be accurate for some reason. We can use ADG clk_i for such case. It came from CPG as very high rate clock, but is not accurately divisible for 48kHz/44.1kHz rate, but enough for approximate rate. This patch set support such use case.
2023-08-23ASoC: audio-graph-card2: add comment for format propertyKuninori Morimoto2-0/+19
We don't need to have "format" property on DT any more if CPU/Codec driver has .auto_selectable_formats settings on snd_soc_dai_ops. The sample dtsi doesn't have it. To avoid user confusion, this patch indicates it on comment. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87edjuzk2p.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-08-23ALSA: ymfpci: Fix the missing snd_card_free() call at probe errorTakashi Iwai1-2/+8
Like a few other drivers, YMFPCI driver needs to clean up with snd_card_free() call at an error path of the probe; otherwise the other devres resources are released before the card and it results in the UAF. This patch uses the helper for handling the probe error gracefully. Fixes: f33fc1576757 ("ALSA: ymfpci: Create card with device-managed snd_devm_card_new()") Cc: <stable@vger.kernel.org> Reported-and-tested-by: Takashi Yano <takashi.yano@nifty.ne.jp> Closes: https://lore.kernel.org/r/20230823135846.1812-1-takashi.yano@nifty.ne.jp Link: https://lore.kernel.org/r/20230823161625.5807-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-08-23ASoC: dwc: i2s: Add StarFive JH7110 SoC supportXingyu Wu2-21/+284
Add StarFive JH7110(TX0/TX1/RX channels) SoC support in the designware I2S driver and a flag to check if it is on the JH7110 SoC. These channels need to enable clocks, resets and syscon register on the JH7110 SoC. So add init ops in platform data for the JH7110 SoC to do this. Their resets should be deassert before changing the parent of clocks so these are done in the init ops of platform data. The I2S controllers use DMA controller by platform data on the JH7110 and their settings about snd_dmaengine_dai_dma_data() should be added in the dw_configure_dai_by_pd(). And use dmaengine PCM registration if these do not have IRQ on the JH7110 SoC. Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com> Link: https://lore.kernel.org/r/20230821144151.207339-4-xingyu.wu@starfivetech.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-08-23ASoC: dwc: Use ops to get platform dataXingyu Wu1-1/+1
Use of_device_get_match_data() to get platform data. Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com> Link: https://lore.kernel.org/r/20230821144151.207339-3-xingyu.wu@starfivetech.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-08-23ASoC: rsnd: setup BRGCKR/BRRA/BRRB on rsnd_adg_clk_control()Kuninori Morimoto1-2/+7
Current adg.c will configure BRGCKR/BRRA/BRRB to output clock when it start sound. OTAH, rsnd_adg_clk_enable() will enables clk_a/b/c when driver was probed. But it is strange, these should be set in the same time. This patch fixup it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87h6oqzlei.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-08-23ASoC: rsnd: remove default division of clock outKuninori Morimoto1-9/+6
Current adg has default division for BRRA/BRRB, but it was created at very beginning of the driver implementation, and is now an unnecessary settings. Because it has this default division, unexpected clockout might be selected. For example if it requests only 44.1kHz base clockout, unrequested 48kHz base clockout also will be selected. This patch remove default division of clock out Reported-by: Vincenzo De Michele <vincenzo.michele@davinci.de> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87il96zlep.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-08-23ASoC: rsnd: tidyup brga/brgb default valueKuninori Morimoto1-2/+2
default value for brga/brgb should be 0xff instead of 0x2. This patch tidyup it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87jztmzlew.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-08-23ASoC: rsnd: setup clock-out only when all conditions are rightKuninori Morimoto1-0/+4
Current adg.c doesn't assume that requested clock out divide condition doesn't match. In such case, it will indicate strange message, and will register NULL clock, etc. It is just a DT setting miss, but is confusable. This patch check all conditions for it. Reported-by: Vincenzo De Michele <vincenzo.michele@davinci.de> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87lee2zlf7.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-08-23ASoC: rsnd: enable clk_i approximate rate usageKuninori Morimoto1-0/+36
Basically Renesas sound ADG is assuming that it has accurately divisible input clock. But sometimes / some board might not have it. The clk_i from CPG is used for such case. It can't calculate accurate division, but can be used as approximate rate. This patch enable clk_i for such case. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Adnan Ali <adnan.ali@bp.renesas.com> Tested-by: Vincenzo De Michele <vincenzo.michele@davinci.de> Tested-by: Patrick Keil <patrick.keil@conti-engineering.com> Link: https://lore.kernel.org/r/87msyizlfd.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-08-23ASoC: nau8821: Improve AMIC recording performance.Seven Lee2-1/+66
Since the hardware may be designed as a single-ended input, the headset mic record only supports single-ended input on the left side. This patch will enhance microphone recording performance for single-end. Signed-off-by: Seven Lee <wtli@nuvoton.com> Link: https://lore.kernel.org/r/20230823071244.1861487-2-wtli@nuvoton.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-08-23ASoC: Delete UDA134x/L3 audio codecLinus Walleij5-764/+0
This codec was used by the deleted S3C board sound/soc/samsung/s3c24xx_uda134x.c. Fixes: 503278c12701 ("ASoC: samsung: remove unused drivers") Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20230822-delete-l3-v2-1-b3ffc07348af@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
2023-08-23ASoC: SOF: amd: clear dsp to host interrupt statusVijendar Mukunda1-3/+3
DSP_SW_INTR_STAT_OFFSET is a common interrupt register which will be accessed by both ACP firmware and driver. This register contains register bits corresponds to host to dsp interrupts and vice versa. when dsp to host interrupt is reported, only clear dsp to host interrupt bit in DSP_SW_INTR_STAT_OFFSET. Fixes: 2e7c6652f9b8 ("ASoC: SOF: amd: Fix for handling spurious interrupts from DSP") Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com> Link: https://lore.kernel.org/r/20230823073340.2829821-7-Vijendar.Mukunda@amd.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-08-23ASoC: SOF: amd: clear panic mask status when panic occursVijendar Mukunda1-0/+4
Due to scratch memory persistence, Once the DSP panic is reported, need to clear the panic mask after handling DSP panic. Otherwise, It results in DSP panic on next reboot. Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com> Link: https://lore.kernel.org/r/20230823073340.2829821-6-Vijendar.Mukunda@amd.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-08-23ASoC: SOF: amd: add conditional check for acp_clkmux_sel registerVijendar Mukunda1-1/+3
Few AMD platforms require ACP ACLK as clock source. Add conditional check for clock mux selection register for switching between internal clock and ACP ACLK. Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com> Link: https://lore.kernel.org/r/20230823073340.2829821-5-Vijendar.Mukunda@amd.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-08-23ASoC: SOF: amd: remove redundant clock mux selection register writeVijendar Mukunda1-7/+1
ACP clock mux selection register is already programmed during acp init sequence. Remove the redundant register write. Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com> Link: https://lore.kernel.org/r/20230823073340.2829821-4-Vijendar.Mukunda@amd.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-08-23ASoC: SOF: amd: add module parameter for firmware debugVijendar Mukunda3-1/+8
Add module parameter for firmware debug. If firmware debug flag is enabled, clear the fusion stall bit which is required for enabling firmware debugging through JTAG. Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com> Link: https://lore.kernel.org/r/20230823073340.2829821-3-Vijendar.Mukunda@amd.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-08-23ASoC: SOF: amd: enable ACP external global interruptVijendar Mukunda2-0/+4
Previously ACP SOF firmware used to enable the ACP external global interrupt register. This will restrict to report ACP host interrupts only after firmware loading is successful. This register needs to be set from host driver to handle other ACP interrupts(SoundWire Interrupts) before loading the ACP firmware. Add field for external interrupt enable register in acp descriptor structure and enable the external interrupt enable register. Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com> Link: https://lore.kernel.org/r/20230823073340.2829821-2-Vijendar.Mukunda@amd.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-08-23ASoC: SOF: amd: remove unused sha dma interrupt codeVijendar Mukunda1-8/+1
During initial development time for RN platform, when SHA dma gets completed, SHA DMA engine used to raise the ACP interrupt. In ACP interrupt handler, SHA DMA interrupt got handled. Currently SHA DMA compleition is verified by checking transfer count using read poll time out logic. Remove unused SHA dma interrupt handling code. Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com> Link: https://lore.kernel.org/r/20230823073340.2829821-1-Vijendar.Mukunda@amd.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-08-23ASoC: cs35l41: Correct amp_gain_tlv valuesCharles Keepax1-1/+1
The current analog gain TLV seems to have completely incorrect values in it. The gain starts at 0.5dB, proceeds in 1dB steps, and has no mute value, correct the control to match. Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20230823085308.753572-1-ckeepax@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-08-22ASoC: fsl: merge DAI call back functions into opsKuninori Morimoto1-1/+1
ALSA SoC merges DAI call backs into .ops. This patch merge these into one. Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202308152047.psX1QNDh-lkp@intel.com/ Cc: Randy Dunlap <rdunlap@infradead.org> Fixes: 446b31e89493 ("ASoC: soc-dai.h: remove unused call back functions") Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Reported-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Randy Dunlap <rdunlap@infradead.org> Tested-by: Randy Dunlap <rdunlap@infradead.org> # build-tested Link: https://lore.kernel.org/r/87a5ujubj0.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-08-22ASoC: SOF: ipc4-topology: Add module parameter to ignore the CPC valuePeter Ujfalusi1-3/+23
Add a new module parameter ipc4_ignore_cpc which can be used to force the kernel to ignore the queried CPC value for all firmware modules and use 0 instead. The CPC lookup is still done to report missing configurations and the debug print is going to be different to be explicit that the CPC is ignored and what was the value we would have used. The CPC value is sent to the firmware with the MOD_INIT_INSTANCE message and it is used by the firmware as a parameter for clock scaling. The flag is intended to be used only when there is a need to validate the firmware behavior regarding to clock scaling since the 0 CPC value will force the DSP to run in full speed, disabling the scaling and provides additional counter point to rule out clock management related issues. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20230822065419.24374-1-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-08-22ASoC: pxa: merge DAI call back functions into opsKuninori Morimoto1-2/+2
ALSA SoC merges DAI call backs into .ops. This patch merge these into one. Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202308151142.hoM5o9LV-lkp@intel.com/ Fixes: 446b31e89493 ("ASoC: soc-dai.h: remove unused call back functions") Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/878ra3ubid.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-08-22ASoC: SOF: ipc4-topology: Fixes for pipelines with SRCMark Brown1-45/+89
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>: The SRC component in a pipeline provides flexibility on the sampling rate which was not handled previously. This series will improve the kernel side with the needed logic to be able to deal with the SRC type of components in pipelines.
2023-08-22Add cs42l43 PC focused SoundWire CODECMark Brown6-0/+3449
Merge series from Charles Keepax <ckeepax@opensource.cirrus.com>: This patch chain adds support for the Cirrus Logic cs42l43 PC focused SoundWire CODEC. The chain is currently based of Lee's for-mfd-next branch. This series is mostly just a resend keeping pace with the kernel under it, except for a minor fixup in the ASoC stuff. Thanks, Charles Charles Keepax (4): dt-bindings: mfd: cirrus,cs42l43: Add initial DT binding mfd: cs42l43: Add support for cs42l43 core driver pinctrl: cs42l43: Add support for the cs42l43 ASoC: cs42l43: Add support for the cs42l43 Lucas Tanure (2): soundwire: bus: Allow SoundWire peripherals to register IRQ handlers spi: cs42l43: Add SPI controller support .../bindings/sound/cirrus,cs42l43.yaml | 313 +++ MAINTAINERS | 4 + drivers/mfd/Kconfig | 23 + drivers/mfd/Makefile | 3 + drivers/mfd/cs42l43-i2c.c | 98 + drivers/mfd/cs42l43-sdw.c | 239 ++ drivers/mfd/cs42l43.c | 1188 +++++++++ drivers/mfd/cs42l43.h | 28 + drivers/pinctrl/cirrus/Kconfig | 11 + drivers/pinctrl/cirrus/Makefile | 2 + drivers/pinctrl/cirrus/pinctrl-cs42l43.c | 609 +++++ drivers/soundwire/bus.c | 32 + drivers/soundwire/bus_type.c | 12 + drivers/spi/Kconfig | 7 + drivers/spi/Makefile | 1 + drivers/spi/spi-cs42l43.c | 284 ++ include/linux/mfd/cs42l43-regs.h | 1184 +++++++++ include/linux/mfd/cs42l43.h | 102 + include/linux/soundwire/sdw.h | 9 + include/sound/cs42l43.h | 17 + sound/soc/codecs/Kconfig | 16 + sound/soc/codecs/Makefile | 4 + sound/soc/codecs/cs42l43-jack.c | 946 +++++++ sound/soc/codecs/cs42l43-sdw.c | 74 + sound/soc/codecs/cs42l43.c | 2278 +++++++++++++++++ sound/soc/codecs/cs42l43.h | 131 + 26 files changed, 7615 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/cirrus,cs42l43.yaml create mode 100644 drivers/mfd/cs42l43-i2c.c create mode 100644 drivers/mfd/cs42l43-sdw.c create mode 100644 drivers/mfd/cs42l43.c create mode 100644 drivers/mfd/cs42l43.h create mode 100644 drivers/pinctrl/cirrus/pinctrl-cs42l43.c create mode 100644 drivers/spi/spi-cs42l43.c create mode 100644 include/linux/mfd/cs42l43-regs.h create mode 100644 include/linux/mfd/cs42l43.h create mode 100644 include/sound/cs42l43.h create mode 100644 sound/soc/codecs/cs42l43-jack.c create mode 100644 sound/soc/codecs/cs42l43-sdw.c create mode 100644 sound/soc/codecs/cs42l43.c create mode 100644 sound/soc/codecs/cs42l43.h -- 2.30.2
2023-08-21ASoC: rt5640: fix typosSenhong Liu1-2/+2
I noticed typos and i fixed them. Signed-off-by: Senhong Liu <liusenhong2022@email.szu.edu.cn> Link: https://lore.kernel.org/r/20230819133345.39961-1-liusenhong2022@email.szu.edu.cn Signed-off-by: Mark Brown <broonie@kernel.org>
2023-08-21ASoC: SOF: amd: Enable signed firmware image loading for Vangogh platformVenkata Prasad Potturu3-0/+40
Enable signed firmware loading for Vangogh platform using dmi quirks. Signed-off-by: Venkata Prasad Potturu <venkataprasad.potturu@amd.com> Link: https://lore.kernel.org/r/20230809123534.287707-3-venkataprasad.potturu@amd.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-08-21ASoC: SOF: amd: Add support for signed fw image loadingVenkata Prasad Potturu4-3/+51
Add support for signed firmware code bin and data bin loading for amd platforms. Signed-off-by: Venkata Prasad Potturu <venkataprasad.potturu@amd.com> Link: https://lore.kernel.org/r/20230809123534.287707-2-venkataprasad.potturu@amd.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-08-21ASoC: SOF: amd: Add sof support for vangogh platformVenkata Prasad Potturu6-4/+290
Add pci driver and platform driver to enable SOF support on ACP5x architecture based Vangogh platform. Signed-off-by: Venkata Prasad Potturu <venkataprasad.potturu@amd.com> Link: https://lore.kernel.org/r/20230809123534.287707-1-venkataprasad.potturu@amd.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-08-21ALSA: hda/tas2781: Fix PM refcount unbalance at tas2781_hda_bind()Takashi Iwai1-5/+3
The error path of tas2781_hda_bind() needs to release PM refcount as well. Modify the code flow to handle properly. Fixes: 5be27f1e3ec9 ("ALSA: hda/tas2781: Add tas2781 HDA driver") Reported-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Closes: https://lore.kernel.org/r/9f910785-e856-1539-e3e4-c9817af5fe67@linux.intel.com Link: https://lore.kernel.org/r/20230820172635.22236-2-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-08-21ALSA: hda/tas2781: Fix acpi device refcount leak at tas2781_read_acpi()Takashi Iwai1-1/+1
The error path at tas2781_read_acpi() doesn't release the acpi_device adev but releases another device physdev instead. This results in a refcount leak. Fix it by replacing with the right object. Fixes: 5be27f1e3ec9 ("ALSA: hda/tas2781: Add tas2781 HDA driver") Reported-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Closes: https://lore.kernel.org/r/9f910785-e856-1539-e3e4-c9817af5fe67@linux.intel.com Link: https://lore.kernel.org/r/20230820172635.22236-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-08-21ALSA: usb-audio: Fix init call orders for UAC1Takashi Iwai1-1/+10
There have been reports of USB-audio driver spewing errors at the probe time on a few devices like Jabra and Logitech. The suggested fix there couldn't be applied as is, unfortunately, because it'll likely break other devices. But, the patch suggested an interesting point: looking at the current init code in stream.c, one may notice that it does initialize differently from the device setup in endpoint.c. Namely, for UAC1, we should call snd_usb_init_pitch() and snd_usb_init_sample_rate() after setting the interface, while the init sequence at parsing calls them before setting the interface blindly. This patch changes the init sequence at parsing for UAC1 (and other devices that need a similar behavior) to be aligned with the rest of the code, setting the interface at first. And, this fixes the long-standing problems on a few UAC1 devices like Jabra / Logitech, as reported, too. Reported-and-tested-by: Joakim Tjernlund <joakim.tjernlund@infinera.com> Closes: https://lore.kernel.org/r/202bbbc0f51522e8545783c4c5577d12a8e2d56d.camel@infinera.com Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20230821111857.28926-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-08-21ASoC: SOF: ipc4-topology: Modify the reference output valid_bits for copierRanjani Sridharan1-5/+53
If the copier has only output valid_bits across all its output formats, the reference for selecting the output format must be set that instead of the valid_bits from the selected input format. Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Link: https://lore.kernel.org/r/20230821113629.5017-5-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-08-21ASoC: SOF: ipc4-topology: Fix pipeline params at the output of copierRanjani Sridharan1-26/+1
When we walk the list of connected widgets from the source to the sink to prepare all widgets, the pipeline_params must be modified to reflect the output audio format at each widget. But, the copier only modifies the sample format in the pipeline_params. So, fix it to also modify the rate and channels. Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Link: https://lore.kernel.org/r/20230821113629.5017-4-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-08-21ASoC: SOF: ipc4-topology: Fix the output reference params for SRCRanjani Sridharan1-10/+30
For playback, the SRC sink rate must be configured based on the requested output format which is restricted to only handle DAI's that support a single audio format for now. For capture, the SRC module should convert the rate to match the rate requested by the PCM hw_params. Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Link: https://lore.kernel.org/r/20230821113629.5017-3-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-08-21ASoC: SOF: ipc4-topology: Modify pipeline params based on SRC output formatRanjani Sridharan1-10/+11
Modify the pipeline_params based on the SRC output format and set the sink_rate in the IPC data. Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Link: https://lore.kernel.org/r/20230821113629.5017-2-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-08-21ALSA: hda/realtek: Fix spelling mistake "powe" -> "power"Colin Ian King1-1/+1
There is a spelling mistake in a quirk entry. Fix it. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Fixes: 3babae915f4c ("ALSA: hda/tas2781: Add tas2781 HDA driver") Link: https://lore.kernel.org/r/20230821080003.16678-1-colin.i.king@gmail.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-08-20Merge commit b320441c04c9 ("Merge tag 'tty-6.5-rc7' of ↵Greg Kroah-Hartman17-46/+125
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty") into tty-next We need the serial-core fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-19um: Fix hostaudio build errorsRandy Dunlap1-1/+1
Use "select" to ensure that the required kconfig symbols are set as expected. Drop HOSTAUDIO since it is now equivalent to UML_SOUND. Set CONFIG_SOUND=m in ARCH=um defconfig files to maintain the status quo of the default configs. Allow SOUND with UML regardless of HAS_IOMEM. Otherwise there is a kconfig warning for unmet dependencies. (This was not an issue when SOUND was defined in arch/um/drivers/Kconfig. I have done 50 randconfig builds and didn't find any issues.) This fixes build errors when CONFIG_SOUND is not set: ld: arch/um/drivers/hostaudio_kern.o: in function `hostaudio_cleanup_module': hostaudio_kern.c:(.exit.text+0xa): undefined reference to `unregister_sound_mixer' ld: hostaudio_kern.c:(.exit.text+0x15): undefined reference to `unregister_sound_dsp' ld: arch/um/drivers/hostaudio_kern.o: in function `hostaudio_init_module': hostaudio_kern.c:(.init.text+0x19): undefined reference to `register_sound_dsp' ld: hostaudio_kern.c:(.init.text+0x31): undefined reference to `register_sound_mixer' ld: hostaudio_kern.c:(.init.text+0x49): undefined reference to `unregister_sound_dsp' and this kconfig warning: WARNING: unmet direct dependencies detected for SOUND Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Fixes: d886e87cb82b ("sound: make OSS sound core optional") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: kernel test robot <lkp@intel.com> Closes: lore.kernel.org/r/202307141416.vxuRVpFv-lkp@intel.com Cc: Richard Weinberger <richard@nod.at> Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: linux-um@lists.infradead.org Cc: Tejun Heo <tj@kernel.org> Cc: Takashi Iwai <tiwai@suse.de> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Masahiro Yamada <masahiroy@kernel.org> Cc: Nathan Chancellor <nathan@kernel.org> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Nicolas Schier <nicolas@fjasle.eu> Cc: linux-kbuild@vger.kernel.org Cc: alsa-devel@alsa-project.org Reviewed-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Richard Weinberger <richard@nod.at>
2023-08-18ASoC: cs42l43: Add support for the cs42l43Charles Keepax6-0/+3449
The CS42L43 is an audio CODEC with integrated MIPI SoundWire interface (Version 1.2.1 compliant), I2C, SPI, and I2S/TDM interfaces designed for portable applications. It provides a high dynamic range, stereo DAC for headphone output, two integrated Class D amplifiers for loudspeakers, and two ADCs for wired headset microphone input or stereo line input. PDM inputs are provided for digital microphones. The ASoC component provides the majority of the functionality of the device, all the audio functions. Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20230804104602.395892-7-ckeepax@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-08-18ASoC: amd: yc: Add VivoBook Pro 15 to quirks list for acp6xBrenoRCBrito1-0/+7
VivoBook Pro 15 Ryzen Edition uses Ryzen 6800H processor, and adding to quirks list for acp6x will enable internal mic. Signed-off-by: BrenoRCBrito <brenorcbrito@gmail.com> Link: https://lore.kernel.org/r/20230818211417.32167-1-brenorcbrito@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-08-18ALSA: asihpi: Remove unused declarationsYue Haibing2-21/+0
These are not implemented, so can remove them. Signed-off-by: Yue Haibing <yuehaibing@huawei.com> Link: https://lore.kernel.org/r/20230818124852.51468-1-yuehaibing@huawei.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-08-18ASoC: amd: acp: Add kcontrols and widgets per-codec in common codeAlper Nebi Yasak3-44/+67
Commit 7ac3404c2e21 ("ASoC: amd: acp: Map missing jack kcontrols") adds card kcontrols and DAPM widgets corresponding to jacks for Headphone and Headset Mic. But these were already being added in acp-legacy-mach.c and acp-sof-mach.c, so this causes a probe error: sof_mach rt5682s-hs-rt1019: control 2:0:0:Headphone Jack Switch:0 is already present sof_mach rt5682s-hs-rt1019: ASoC: Failed to add Headphone Jack Switch: -16 sof_mach rt5682s-hs-rt1019: devm_snd_soc_register_card(sof-rt5682s-hs-rt1019) failed: -16 sof_mach: probe of rt5682s-hs-rt1019 failed with error -16 Removing the new duplicates from the common code might be enough to fix the issue. But some of the codecs use different kcontrols and widgets. NAU8821 alone has an "Int Mic". MAX98360A has a single "Spk", while RT1019 has "Left Spk" and "Right Spk" (and two codec instances with name prefixes). Since there are per-codec differences, add the kcontrols and widgets in the common code as each dai-link is being initialized, instead of in the two machine drivers' probe(). Also, MAX98388 has Left and Right instances, but uses a single "SPK" widget. That seems weird, so normalize it to use two widgets (one per each instance like RT1019) while we're adding controls. Fixes: 7ac3404c2e21 ("ASoC: amd: acp: Map missing jack kcontrols") Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com> Link: https://lore.kernel.org/r/20230818080314.32991-1-alpernebiyasak@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-08-18ASoC: rt5645: improve the depop sequences of CBJ detectionShuming Fan1-6/+12
This patch will improve the depop function of CBJ detection before the headphone playback when the system resumes. We also want to complete the CBJ detection in the system-level resume function. It could avoid triggering the detection at the playing state of headphones. Signed-off-by: Shuming Fan <shumingf@realtek.com> Link: https://lore.kernel.org/r/20230818023732.2153170-1-shumingf@realtek.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-08-18ALSA: pcm: Drop obsoleted PCM copy_user and copy_kernel opsTakashi Iwai2-18/+2
Finally all users have been converted to the new PCM copy ops, let's drop the obsoleted copy_kernel and copy_user ops completely. Link: https://lore.kernel.org/r/20230815190136.8987-26-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-08-18ASoC: pcm: Drop obsoleted PCM copy_user opsTakashi Iwai2-22/+0
Now all ASoC users have been replaced to use the new PCM copy ops, let's drop the obsoleted copy_user ops and its helper function. Reviewed-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20230815190136.8987-25-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-08-18ASoC: dmaengine: Use iov_iter for process callback, tooTakashi Iwai3-5/+4
Along with the conversion to PCM copy ops, use the iov_iter for the pointer to be passed to the dmaengine process callback, too. It avoids the direct reference of iter_iov_addr(), and it can potentially help for the drivers to access memory properly (although both atmel and stm drivers don't use the given buffer address at all for now). Reviewed-by: Mark Brown <broonie@kernel.org> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Claudiu Beznea <claudiu.beznea@microchip.com> Cc: Olivier Moysan <olivier.moysan@foss.st.com> Cc: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com> Link: https://lore.kernel.org/r/20230815190136.8987-23-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-08-18ASoC: dmaengine: Convert to generic PCM copy opsTakashi Iwai1-8/+9
This patch converts the ASoC dmaenging driver code to use the new unified PCM copy callback. It's a straightforward conversion from *_user() to *_iter() variants. The process callback is still using the direct pointer as of now, but it'll be converted in the next patch. Note that copy_from/to_iter() returns the copied bytes, hence the error condition is adjusted accordingly. Reviewed-by: Mark Brown <broonie@kernel.org> Cc: Lars-Peter Clausen <lars@metafoo.de> Link: https://lore.kernel.org/r/20230815190136.8987-22-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
Powered by cgit, Gruvboxed by Blaster4385.