| Age | Commit message (Collapse) | Author | Files | Lines |
|
Instead of directly changing the GPROCEN/PIE bits in PPCTL we should use
the existing helper hda_dsp_ctrl_ppcap_enable() and
hda_dsp_ctrl_ppcap_int_enable() helpers for clarity.
Reviewed-by: Ranjani Sridharan <[email protected]>
Signed-off-by: Peter Ujfalusi <[email protected]>
Signed-off-by: Pierre-Louis Bossart <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Call snd_sof_dsp_dbg_dump() with the same flags/dump_msg
as used in function hda_loader.c/cl_dsp_init().
Reviewed-by: Péter Ujfalusi <[email protected]>
Signed-off-by: Yong Zhi <[email protected]>
Signed-off-by: Pierre-Louis Bossart <[email protected]>
Signed-off-by: Peter Ujfalusi <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
The control change notification is sent as module notification with a
standardized event_id (higher 16 bit is 0xA15A).
Add generic code to handle the module notification and invoke the control
update callback if the notification is an ALSA kcontrol change message.
Signed-off-by: Peter Ujfalusi <[email protected]>
Reviewed-by: Ranjani Sridharan <[email protected]>
Reviewed-by: Pierre-Louis Bossart <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Implement the sof_ipc_tplg_control_ops.update function to support a control
change notification from the firmware on switch or enum control types.
Based on the module notification message content, look up the swidget, then
the scontrol which was the source of the notification then if the message
contains the changed values update the cached values.
If only a notification without values received, marked the control as dirty
and on next read access fetch the new values from the firmware.
Signed-off-by: Peter Ujfalusi <[email protected]>
Reviewed-by: Ranjani Sridharan <[email protected]>
Reviewed-by: Pierre-Louis Bossart <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
The sof_ipc4_find_swidget_by_ids() can be used to find the swidget of a
module instance.
The lookup parameters are the module_id and the instance_id.
Signed-off-by: Peter Ujfalusi <[email protected]>
Reviewed-by: Ranjani Sridharan <[email protected]>
Reviewed-by: Pierre-Louis Bossart <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
In the current code, we enable a widget core when it is set up and
disable it when it is freed. This is problematic with IPC4 because
widget free is essentially a NOP and all widgets are freed in the
firmware when the pipeline is deleted. This results in a crash during
pipeline deletion when one of it's widgets is scheduled to run on a
secondary core and is powered off when widget is freed. So, change the
logic to enable all cores needed by all the modules in a pipeline when
the pipeline widget is set up and disable them after the pipeline
widget is freed.
Signed-off-by: Ranjani Sridharan <[email protected]>
Reviewed-by: Pierre-Louis Bossart <[email protected]>
Reviewed-by: Péter Ujfalusi <[email protected]>
Signed-off-by: Peter Ujfalusi <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
With IPC4, a pipeline may contain multiple modules in the data
processing domain and they can be scheduled to run on different cores.
Add a new field in struct snd_sof_pipeline to keep track of all the
cores that are associated with the modules in the pipeline. Set the
pipeline core mask for IPC3 when initializing the pipeline widget IPC
structure. For IPC4, set the core mark when initializing the pipeline
widget and initializing processing modules in the data processing domain.
Signed-off-by: Ranjani Sridharan <[email protected]>
Reviewed-by: Pierre-Louis Bossart <[email protected]>
Reviewed-by: Péter Ujfalusi <[email protected]>
Signed-off-by: Peter Ujfalusi <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Add the machine compatible and topology filename for the Google Steelix
MT8186 Chromebook to load the correct SOF topology file.
Signed-off-by: AngeloGioacchino Del Regno <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
The function has multiple return points at which it is not released
previously allocated memory.
Signed-off-by: Kamil Duljas <[email protected]>
Acked-by: Peter Ujfalusi <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Merge series from Daniel Baluta <[email protected]>:
This is used for configuring MICFIL PDM with i.MX8MPlus. Tested
with 8MIC-RPI-MX8 microphone array.
|
|
To prevent confusion on the follow-up platform, it is necessary to
remove any unused variables within the struct mtk_adsp_chip_info.
Signed-off-by: Trevor Wu <[email protected]>
Reviewed-by: Yaochun Hung <[email protected]>
Reviewed-by: AngeloGioacchino Del Regno <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Since there are some variables that are no longer being used, we remove
the code that was implemented for those variables.
Signed-off-by: Trevor Wu <[email protected]>
Reviewed-by: Yaochun Hung <[email protected]>
Reviewed-by: AngeloGioacchino Del Regno <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Since there are some variables that are no longer being used, we remove
the code that was implemented for those variables.
Signed-off-by: Trevor Wu <[email protected]>
Reviewed-by: Yaochun Hung <[email protected]>
Reviewed-by: AngeloGioacchino Del Regno <[email protected]>
Tested-by: AngeloGioacchino Del Regno <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Currently we only support configuration for number of channels and
sample rate.
Reviewed-by: Péter Ujfalusi <[email protected]>
Reviewed-by: Iuliana Prodan <[email protected]>
Signed-off-by: Daniel Baluta <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
This will allow creating of PDM DAI links.
Reviewed-by: Péter Ujfalusi <[email protected]>
Reviewed-by: Iuliana Prodan <[email protected]>
Signed-off-by: Daniel Baluta <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.7
A collection of fixes that have come in during the merge window, the
majority of this is driver specific with one core fix for handling of
DAPM clock widgets when a name prefix is specified for the card - the
name should not be applied to the clock name we request from the clock
API.
|
|
Fix typo s/depndent/dependent
Fixes: 6e9548cdb30e ("ASoC: SOF: Convert the generic IPC flood test into SOF client")
Signed-off-by: Eugen Hristev <[email protected]>
Reviewed-by: AngeloGioacchino Del Regno <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Updates for v6.7
More updates for v6,7 following the early merge request:
- Fixes for handling of component name prefixing when name prefixes
are used by the machine driver.
- Fixes for noise when stopping some Sounwire CODECs.
- Support for AMD ACP 6.3 and 7.0, Awinc AW88399, more Intel
platforms and more Qualcomm SC7180 platforms.
|
|
This was sent too late to actually make it for v6.6 but was sent against
v6.6 so merge it up here.
|
|
Like the change we've done for remove callback, the newly introduced
remove_late callback should be changed to void return, too.
Fixes: 17baaa1f950b ("ASoC: SOF: core: Add probe_early and remove_late callbacks")
Acked-by: Mark Brown <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
|
|
Provide an option to load DSP data bin to ACP SRAM.
Signed-off-by: Vijendar Mukunda <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
DSP data bin can be loaded in to ACP DRAM or ACP SRAM.
Add conditional check for ACP DRAM usage for data bin loading.
Rename DRAM base address macro to have symmetry.
Signed-off-by: Vijendar Mukunda <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Increase DSP cache window range to 2.5MB to align with ACP memory.
Signed-off-by: Vijendar Mukunda <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Add SOF support for ACP6.3 version based platform
Signed-off-by: Vijendar Mukunda <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Some Chromebooks do not populate the product family DMI value resulting
in firmware load failures.
Add another quirk detection entry that looks for "Google" in the BIOS
version. Theoretically, PRODUCT_FAMILY could be replaced with
BIOS_VERSION, but it is left as a quirk to be conservative.
Cc: [email protected]
Signed-off-by: Mark Hasemeyer <[email protected]>
Acked-by: Curtis Malainey <[email protected]>
Link: https://lore.kernel.org/r/20231020145953.v1.1.Iaf5702dc3f8af0fd2f81a22ba2da1a5e15b3604c@changeid
Signed-off-by: Mark Brown <[email protected]>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next
ASoC: Updates for v6.7
This is quite a large set of changes but mostly due to API cleanups and
in driver specific ways rather than due to anything subsystem wide.
Highlights include:
- Standardisation of API prefixes on snd_soc_, removing asoc_.
- GPIO API usage improvements.
- Support for HDA patches.
- Lots of work on SOF, including crash dump support.
- Support for AMD platforms with es83xx, Awinc AT87390, many Intel
platforms, many Mediatek platforms, Qualcomm SM6115, Richtek RTQ9128
and Texas Instruments TAS575x.
[ the merge conflicts around SOF Intel HD-audio and CS35L41 subcodec
drivers are resolved here -- tiwai ]
|
|
Now that all drivers have moved from modprobe loading to
handling -EPROBE_DEFER, we can remove the argument again.
Signed-off-by: Maarten Lankhorst <[email protected]>
Reviewed-by: Kai Vehmanen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
|
|
Now that we can use -EPROBE_DEFER, it's no longer required to spin off
the snd_hdac_i915_init into a workqueue.
Use the -EPROBE_DEFER mechanism instead, which must be returned in the
probe function.
The previously added probe_early can be used for this,
and we also use the newly added remove_late for unbinding afterwards.
Signed-off-by: Maarten Lankhorst <[email protected]>
Cc: Pierre-Louis Bossart <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
|
|
Xe is a new GPU driver that re-uses the display (and sound) code from
i915. It's no longer possible to load i915, as the GPU can be driven
by the xe driver instead.
The new behavior will return -EPROBE_DEFER, and wait for a compatible
driver to be loaded instead of modprobing i915.
Converting all drivers at the same time is a lot of work, instead we
will convert each user one by one.
Signed-off-by: Maarten Lankhorst <[email protected]>
Reviewed-by: Kai Vehmanen <[email protected]>
Reviewed-by: Pierre-Louis Bossart <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
|
|
The hda_codec_i915_init() errors are ignored in
hda_init() so it can never return -EPROBE_DEFER.
Fix this before we move the call to hda_init() from the
deferred probe to early probe.
While at it, also fix error handling when hda_dsp_ctrl_get_caps
fails.
Suggested-by: Kai Vehmanen <[email protected]>
Signed-off-by: Maarten Lankhorst <[email protected]>
Reviewed-by: Kai Vehmanen <[email protected]>
Reviewed-by: Peter Ujfalusi <[email protected]>
Acked-by: Peter Ujfalusi <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
|
|
This patch moves the initial parts of the probe to the probe_early()
callback, which provides a much faster decision on whether the SOF
driver shall deal with a specific platform or yield to other Intel
drivers.
This is a limited functionality change, the bigger change is to move
the i915/Xe initialization to the probe_early().
Signed-off-by: Pierre-Louis Bossart <[email protected]>
Signed-off-by: Maarten Lankhorst <[email protected]>
Acked-by: Mark Brown <[email protected]>
Reviewed-by: Peter Ujfalusi <[email protected]>
Acked-by: Peter Ujfalusi <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
|
|
The existing DSP probe may be handled in a workqueue to allow for
extra time, typically for the i915 request_module and HDAudio codec
handling.
With the upcoming changes for i915/Xe driver relying on the
-EPROBE_DEFER mechanism, we need to have a first pass of the probe
which cannot be pushed to a workqueue. Introduce 2 new optional
callbacks.
probe_early is called before the workqueue runs. remove_late may be
called from the workqueue if load is unsuccesful, but will otherwise
be called on module unload.
Signed-off-by: Pierre-Louis Bossart <[email protected]>
Signed-off-by: Maarten Lankhorst <[email protected]>
Acked-by: Mark Brown <[email protected]>
Reviewed-by: Peter Ujfalusi <[email protected]>
Acked-by: Peter Ujfalusi <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
|
|
In an effort to not call sof_ops_free twice, we stopped running it when
probe was aborted.
Check the result of cancel_work_sync to see if this was the case.
Fixes: 31bb7bd9ffee ("ASoC: SOF: core: Only call sof_ops_free() on remove if the probe was successful")
Cc: Peter Ujfalusi <[email protected]>
Acked-by: Mark Brown <[email protected]>
Reviewed-by: Peter Ujfalusi <[email protected]>
Acked-by: Peter Ujfalusi <[email protected]>
Signed-off-by: Maarten Lankhorst <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
|
|
We don't use the returned value and return 0 anyways, let's follow the
example of platform drivers and simplify the definitions.
Signed-off-by: Pierre-Louis Bossart <[email protected]>
Reviewed-by: Daniel Baluta <[email protected]>
Reviewed-by: Rander Wang <[email protected]>
Reviewed-by: Péter Ujfalusi <[email protected]>
Reviewed-by: Bard Liao <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Now that we have notifications with payload (kcontrol change
notifications), it is time to add the payload dump on the rx path as well.
Reviewed-by: Seppo Ingalsuo <[email protected]>
Reviewed-by: Ranjani Sridharan <[email protected]>
Signed-off-by: Peter Ujfalusi <[email protected]>
Signed-off-by: Pierre-Louis Bossart <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
suspend
In the existing IPC support, the reply to each IPC message is handled in
an IRQ thread. The assumption is that the IRQ thread is scheduled without
significant delays.
On an experimental (iow, buggy) kernel, the IRQ thread dealing with the
reply to the last IPC message before powering-down the DSP can be delayed
by several seconds. The IRQ thread will proceed with register accesses
after the DSP is powered-down which results in a kernel crash.
While the bug which causes the delay is not in the audio stack, we must
handle such cases with defensive programming to avoid such crashes.
Call synchronize_irq() before proceeding to power down the DSP to make
sure that no irq thread is pending execution.
Closes: https://github.com/thesofproject/linux/issues/4608
Reviewed-by: Guennadi Liakhovetski <[email protected]>
Signed-off-by: Peter Ujfalusi <[email protected]>
Signed-off-by: Pierre-Louis Bossart <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Split out firmware definitions for Intel Arrow Lake platforms.
Reviewed-by: Kai Vehmanen <[email protected]>
Reviewed-by: Ranjani Sridharan <[email protected]>
Signed-off-by: Arun T <[email protected]>
Signed-off-by: Pierre-Louis Bossart <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
The SOF platform drivers all use either sof_of_remove() or
sof_acpi_remove() which both return zero unconditionally. Change these
functions to return void and the drivers to use .remove_new(). There is
no semantical change.
Signed-off-by: Uwe Kleine-König <[email protected]>
Reviewed-by: Pierre-Louis Bossart <[email protected]>
Reviewed-by: Daniel Baluta <[email protected]>
Reviewed-by: AngeloGioacchino Del Regno <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
We have adjacent changes for the cs42l43 DT schema, merge the fixes
branch up so that there's a single thing for people to base future
changes on.
|
|
When IPC3 is not selected, sof-client.c still makes a hard-coded
reference to an IPC3-specific function:
ERROR: modpost: "sof_ipc3_do_rx_work" [sound/soc/sof/snd-sof.ko]
undefined!
Fix by making the code conditional.
Closes: https://github.com/thesofproject/linux/issues/4581
Signed-off-by: Pierre-Louis Bossart <[email protected]>
Reviewed-by: Curtis Malainey <[email protected]>
Reviewed-by: Péter Ujfalusi <[email protected]>
Reviewed-by: Ranjani Sridharan <[email protected]>
Signed-off-by: Peter Ujfalusi <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
The pipeline priority is set in topology and driver should sort pipeline
based on priority for trigger order.
Reviewed-by: Péter Ujfalusi <[email protected]>
Signed-off-by: Rander Wang <[email protected]>
Signed-off-by: Pierre-Louis Bossart <[email protected]>
Signed-off-by: Peter Ujfalusi <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Driver set pipeline priority according to priority setting in topology.
Reviewed-by: Péter Ujfalusi <[email protected]>
Signed-off-by: Rander Wang <[email protected]>
Signed-off-by: Pierre-Louis Bossart <[email protected]>
Signed-off-by: Peter Ujfalusi <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
If, for any reason, the open-coded arithmetic causes a wraparound,
the protection that `struct_size()` adds against potential integer
overflows is defeated. Fix this by hardening call to `struct_size()`
with `size_add()`.
Fixes: f9efae954905 ("ASoC: SOF: ipc4-topology: Add support for base config extension")
Signed-off-by: "Gustavo A. R. Silva" <[email protected]>
Reviewed-by: Kees Cook <[email protected]>
Link: https://lore.kernel.org/r/ZQSr15AYJpDpipg6@work
Signed-off-by: Mark Brown <[email protected]>
|
|
Setting ACP ACLK as clock source when ACP enters D0 state causing
firmware load failure as mentioned in below scenario.
- Load snd_sof_amd_rembrandt
- Play or Record audio
- Stop audio
- Unload snd_sof_amd_rembrandt
- Reload snd_sof_amd_rembrandt
If acp_clkmux_sel register field is set, then clock source will be
set to ACP ACLK when ACP enters D0 state.
During stream stop, if there is no active stream is running then
acp firmware will set the ACP ACLK value to zero.
When driver is reloaded and clock source is selected as ACP ACLK,
as ACP ACLK is programmed to zero, firmware loading will fail.
For RMB platform, remove the clock mux selection field so that
ACP will use internal clock source when ACP enters D0 state.
Fixes: 41cb85bc4b52 ("ASoC: SOF: amd: Add support for Rembrandt plaform.")
Reported-by: coolstar <[email protected]>
Closes: https://github.com/thesofproject/sof/issues/8137
Signed-off-by: Vijendar Mukunda <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
ASoC is now unified asoc_xxx() into snd_soc_xxx().
This patch convert asoc_xxx() to snd_soc_xxx().
Signed-off-by: Kuninori Morimoto <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
For the benefit of CI.
|
|
ASoC is now unified asoc_xxx() into snd_soc_xxx().
This patch convert asoc_xxx() to snd_soc_xxx().
Signed-off-by: Kuninori Morimoto <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
ASoC is now unified asoc_xxx() into snd_soc_xxx().
This patch convert asoc_xxx() to snd_soc_xxx().
Signed-off-by: Kuninori Morimoto <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
ASoC is now unified asoc_xxx() into snd_soc_xxx().
This patch convert asoc_xxx() to snd_soc_xxx().
Signed-off-by: Kuninori Morimoto <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Merge series from Peter Ujfalusi <[email protected]>:
When a firmware crashes it creats a panic information into a telemetry
slot. The panic format is defined by Zephyr, includes stack and
additional information to help to identify the reason for the crash.
Part of the firmware exception handling the firmware also sends an
EXCEPTION_CAUGHT notification.
This series implements the kernel side handling of the exception: print
information into the kernel log export the whole telemetry slot to user
space for tools extract additional information from the panic dump.
|