| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
XArrays are a better match than IDR for how AppArmor is mapping
secids. Specifically AppArmor is trying to keep the allocation
dense. XArrays also have the advantage of avoiding the complexity IDRs
preallocation.
In addition this avoids/fixes a lockdep issue raised in the LKML thread
"Linux 5.18-rc4"
where there is a report of an interaction between apparmor and IPC,
this warning may have been spurious as the reported issue is in a
per-cpu local lock taken by the IDR. With the one side in the IPC id
allocation and the other in AppArmor's secid allocation.
Description by John Johansen <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Matthew Wilcox <[email protected]>
Signed-off-by: John Johansen <[email protected]>
|
|
Separate kernel objects from unconfined. This is done so we can
distinguish between the two in debugging, auditing and in preparation
for being able to replace unconfined, which is not appropriate for the
kernel.
The kernel label will continue to behave similar to unconfined.
Acked-by: Jon Tourville <[email protected]>
Signed-off-by: John Johansen <[email protected]>
|
|
Use IS_ENABLED(CONFIG_XXX) instead of #ifdef/#endif statements to
initialize .enabled, minor simplicity improvement.
Signed-off-by: Xiu Jianfeng <[email protected]>
Reviewed-by: Ahmad Fatoum <[email protected]>
Signed-off-by: Mimi Zohar <[email protected]>
|
|
On failure to allocate the SHA1 tfm, IMA fails to initialize and exits
without freeing the ima_algo_array. Add the missing kfree() for
ima_algo_array to avoid the potential memory leak.
Signed-off-by: Jianglei Nie <[email protected]>
Fixes: 6d94809af6b0 ("ima: Allocate and initialize tfm for each PCR bank")
Signed-off-by: Mimi Zohar <[email protected]>
|
|
Currently, an unsigned kernel could be kexec'ed when IMA arch specific
policy is configured unless lockdown is enabled. Enforce kernel
signature verification check in the kexec_file_load syscall when IMA
arch specific policy is configured.
Fixes: 99d5cadfde2b ("kexec_file: split KEXEC_VERIFY_SIG into KEXEC_SIG and KEXEC_SIG_FORCE")
Reported-and-suggested-by: Mimi Zohar <[email protected]>
Signed-off-by: Coiby Xu <[email protected]>
Signed-off-by: Mimi Zohar <[email protected]>
|
|
With some of the stricter type checking in KUnit's EXPECT macros
removed, several casts in policy_unpack_test are no longer required.
Remove the unnecessary casts, making the conditions clearer.
Reviewed-by: Brendan Higgins <[email protected]>
Acked-by: John Johansen <[email protected]>
Signed-off-by: David Gow <[email protected]>
Signed-off-by: John Johansen <[email protected]>
|
|
When copy_from_user failed, the memory is freed by kvfree. however the
management struct and data blob are allocated independently, so only
kvfree(data) cause a memleak issue here. Use aa_put_loaddata(data) to
fix this issue.
Fixes: a6a52579e52b5 ("apparmor: split load data into management struct and data blob")
Signed-off-by: Xiu Jianfeng <[email protected]>
Signed-off-by: John Johansen <[email protected]>
|
|
The aa_pivotroot() function has a reference counting bug in a specific
path. When aa_replace_current_label() returns on success, the function
forgets to decrement the reference count of “target”, which is
increased earlier by build_pivotroot(), causing a reference leak.
Fix it by decreasing the refcount of “target” in that path.
Fixes: 2ea3ffb7782a ("apparmor: add mount mediation")
Co-developed-by: Xiyu Yang <[email protected]>
Signed-off-by: Xiyu Yang <[email protected]>
Co-developed-by: Xin Tan <[email protected]>
Signed-off-by: Xin Tan <[email protected]>
Signed-off-by: Xin Xiong <[email protected]>
Signed-off-by: John Johansen <[email protected]>
|
|
Remove some warnings found by running scripts/kernel-doc,
which is caused by using 'make W=1'.
security/apparmor/domain.c:137: warning: Function parameter or member
'state' not described in 'label_compound_match'
security/apparmor/domain.c:137: warning: Excess function parameter
'start' description in 'label_compound_match'
security/apparmor/domain.c:1294: warning: Excess function parameter
'onexec' description in 'aa_change_profile'
Reported-by: Abaci Robot <[email protected]>
Signed-off-by: Yang Li <[email protected]>
Signed-off-by: John Johansen <[email protected]>
|
|
IF CONFIG_SECURITY_APPARMOR_EXPORT_BINARY is disabled, there remains
some unneed references to zlib, and can result in undefined symbol
references if ZLIB_INFLATE or ZLIB_DEFLATE are not defined.
Reported-by: kernel test robot <[email protected]>
Fixes: abfb9c0725f2 ("apparmor: make export of raw binary profile to userspace optional")
Signed-off-by: John Johansen <[email protected]>
|
|
Clang static analysis reports this issue
label.c:1802:3: warning: 2nd function call argument
is an uninitialized value
pr_info("%s", str);
^~~~~~~~~~~~~~~~~~
str is set from a successful call to aa_label_asxprint(&str, ...)
On failure a negative value is returned, not a -1. So change
the check.
Fixes: f1bd904175e8 ("apparmor: add the base fns() for domain labels")
Signed-off-by: Tom Rix <[email protected]>
Signed-off-by: John Johansen <[email protected]>
|
|
Don't use /** for non-kernel-doc comments and change function name
aa_mangle_name to mangle_name in kernel-doc comment to Remove some
warnings found by running scripts/kernel-doc, which is caused by
using 'make W=1'.
security/apparmor/apparmorfs.c:1503: warning: Cannot understand *
on line 1503 - I thought it was a doc line
security/apparmor/apparmorfs.c:1530: warning: Cannot understand *
on line 1530 - I thought it was a doc line
security/apparmor/apparmorfs.c:1892: warning: Cannot understand *
on line 1892 - I thought it was a doc line
security/apparmor/apparmorfs.c:108: warning: expecting prototype for
aa_mangle_name(). Prototype was for mangle_name() instead
Reported-by: Abaci Robot <[email protected]>
Signed-off-by: Yang Li <[email protected]>
Signed-off-by: John Johansen <[email protected]>
|
|
Add the description of @ns_name, change function name aa_u16_chunck to
unpack_u16_chunk and verify_head to verify_header in kernel-doc comment
to remove warnings found by running scripts/kernel-doc, which is caused
by using 'make W=1'.
security/apparmor/policy_unpack.c:224: warning: expecting prototype for
aa_u16_chunck(). Prototype was for unpack_u16_chunk() instead
security/apparmor/policy_unpack.c:678: warning: Function parameter or
member 'ns_name' not described in 'unpack_profile'
security/apparmor/policy_unpack.c:950: warning: expecting prototype for
verify_head(). Prototype was for verify_header() instead
Reported-by: Abaci Robot <[email protected]>
Signed-off-by: Yang Li <[email protected]>
Signed-off-by: John Johansen <[email protected]>
|
|
Fix a spelling problem and change @mntpath to @path to remove warnings
found by running scripts/kernel-doc, which is caused by using 'make W=1'.
security/apparmor/mount.c:321: warning: Function parameter or member
'devname' not described in 'match_mnt_path_str'
security/apparmor/mount.c:321: warning: Excess function parameter
'devnme' description in 'match_mnt_path_str'
security/apparmor/mount.c:377: warning: Function parameter or member
'path' not described in 'match_mnt'
security/apparmor/mount.c:377: warning: Excess function parameter
'mntpath' description in 'match_mnt'
Reported-by: Abaci Robot <[email protected]>
Signed-off-by: Yang Li <[email protected]>
Signed-off-by: John Johansen <[email protected]>
|
|
Make use of the struct_size() helper instead of an open-coded version,
in order to avoid any potential type mistakes or integer overflows that,
in the worst scenario, could lead to heap overflows.
Also, address the following sparse warnings:
security/apparmor/lib.c:139:23: warning: using sizeof on a flexible structure
Link: https://github.com/KSPP/linux/issues/174
Signed-off-by: Gustavo A. R. Silva <[email protected]>
Signed-off-by: John Johansen <[email protected]>
|
|
When the mount check fails due to a permission check failure instead
of explicitly at one of the subcomponent checks, AppArmor is reporting
a failure in the flags match. However this is not true and AppArmor
can not attribute the error at this point to any particular component,
and should only indicate the mount failed due to missing permissions.
Fixes: 2ea3ffb7782a ("apparmor: add mount mediation")
Signed-off-by: John Johansen <[email protected]>
|
|
Return value from nf_register_net_hooks() directly instead
of taking this in another redundant variable.
Reported-by: Zeal Robot <[email protected]>
Signed-off-by: Minghao Chi <[email protected]>
Signed-off-by: CGEL ZTE <[email protected]>
Signed-off-by: John Johansen <[email protected]>
|
|
Global quieting of denied AppArmor generated file events is not
handled correctly. Unfortunately the is checking if quieting of all
audit events is set instead of just denied events.
Fixes: 67012e8209df ("AppArmor: basic auditing infrastructure.")
Signed-off-by: John Johansen <[email protected]>
|
|
Reported-by: kernel test robot <[email protected]>
Reported-by: Dan Carpenter <[email protected]>
Signed-off-by: Mike Salvatore <[email protected]>
Signed-off-by: John Johansen <[email protected]>
|
|
Currently if sha1 hashing of policy is disabled a sha1 hash symlink
to the non-existent file is created. There is now reason to create
the symlink in this case so don't do it.
Signed-off-by: John Johansen <[email protected]>
|
|
AppArmor by default does an extensive check on loaded policy that
can take quite some time on limited resource systems. Allow
disabling this check for embedded systems where system images are
readonly and have checksumming making the need for the embedded
policy to be fully checked to be redundant.
Note: basic policy checks are still done.
Signed-off-by: John Johansen <[email protected]>
|
|
Embedded systems have limited space and don't need the introspection
or checkpoint restore capability provided by exporting the raw
profile binary data so make it so make it a config option.
This will reduce run time memory use and also speed up policy loads.
Signed-off-by: John Johansen <[email protected]>
|
|
Update help to note this option is not needed for small embedded systems
where regular policy introspection is not used.
Signed-off-by: John Johansen <[email protected]>
|
|
Fix function name in lsm.c kernel-doc comment
to remove some warnings found by running scripts/kernel-doc,
which is caused by using 'make W=1'.
security/apparmor/lsm.c:819: warning: expecting prototype for
apparmor_clone_security(). Prototype was for
apparmor_sk_clone_security() instead
security/apparmor/lsm.c:923: warning: expecting prototype for
apparmor_socket_list(). Prototype was for apparmor_socket_listen()
instead
security/apparmor/lsm.c:1028: warning: expecting prototype for
apparmor_getsockopt(). Prototype was for apparmor_socket_getsockopt()
instead
security/apparmor/lsm.c:1038: warning: expecting prototype for
apparmor_setsockopt(). Prototype was for apparmor_socket_setsockopt()
instead
ecurity/apparmor/lsm.c:1061: warning: expecting prototype for
apparmor_socket_sock_recv_skb(). Prototype was for
apparmor_socket_sock_rcv_skb() instead
Reported-by: Abaci Robot <[email protected]>
Signed-off-by: Yang Li <[email protected]>
Signed-off-by: John Johansen <[email protected]>
|
|
Fix function name in security/apparmor/label.c, policy.c, procattr.c
kernel-doc comment to remove some warnings found by clang(make W=1 LLVM=1).
security/apparmor/label.c:499: warning: expecting prototype for
aa_label_next_not_in_set(). Prototype was for
__aa_label_next_not_in_set() instead
security/apparmor/label.c:2147: warning: expecting prototype for
__aa_labelset_udate_subtree(). Prototype was for
__aa_labelset_update_subtree() instead
security/apparmor/policy.c:434: warning: expecting prototype for
aa_lookup_profile(). Prototype was for aa_lookupn_profile() instead
security/apparmor/procattr.c:101: warning: expecting prototype for
aa_setprocattr_chagnehat(). Prototype was for aa_setprocattr_changehat()
instead
Reported-by: Abaci Robot <[email protected]>
Signed-off-by: Yang Li <[email protected]>
Signed-off-by: John Johansen <[email protected]>
|
|
AppArmor is prefixing secids that are converted to secctx with the =
to indicate the secctx should only be parsed from an absolute root
POV. This allows catching errors where secctx are reparsed back into
internal labels.
Unfortunately because audit is using secid to secctx conversion this
means that subject and object labels can result in a very unfortunate
== that can break audit parsing.
eg. the subj==unconfined term in the below audit message
type=USER_LOGIN msg=audit(1639443365.233:160): pid=1633 uid=0 auid=1000
ses=3 subj==unconfined msg='op=login id=1000 exe="/usr/sbin/sshd"
hostname=192.168.122.1 addr=192.168.122.1 terminal=/dev/pts/1 res=success'
Fix this by switch the prepending of = to a _. This still works as a
special character to flag this case without breaking audit. Also move
this check behind debug as it should not be needed during normal
operqation.
Fixes: 26b7899510ae ("apparmor: add support for absolute root view based labels")
Reported-by: Casey Schaufler <[email protected]>
Signed-off-by: John Johansen <[email protected]>
|
|
Extend LoadPin to allow loading of kernel files from trusted dm-verity [1]
devices.
This change adds the concept of trusted verity devices to LoadPin. LoadPin
maintains a list of root digests of verity devices it considers trusted.
Userspace can populate this list through an ioctl on the new LoadPin
securityfs entry 'dm-verity'. The ioctl receives a file descriptor of
a file with verity digests as parameter. Verity reads the digests from
this file after confirming that the file is located on the pinned root.
The digest file must contain one digest per line. The list of trusted
digests can only be set up once, which is typically done at boot time.
When a kernel file is read LoadPin first checks (as usual) whether the file
is located on the pinned root, if so the file can be loaded. Otherwise, if
the verity extension is enabled, LoadPin determines whether the file is
located on a verity backed device and whether the root digest of that
device is in the list of trusted digests. The file can be loaded if the
verity device has a trusted root digest.
Background:
As of now LoadPin restricts loading of kernel files to a single pinned
filesystem, typically the rootfs. This works for many systems, however it
can result in a bloated rootfs (and OTA updates) on platforms where
multiple boards with different hardware configurations use the same rootfs
image. Especially when 'optional' files are large it may be preferable to
download/install them only when they are actually needed by a given board.
Chrome OS uses Downloadable Content (DLC) [2] to deploy certain 'packages'
at runtime. As an example a DLC package could contain firmware for a
peripheral that is not present on all boards. DLCs use dm-verity to verify
the integrity of the DLC content.
[1] https://www.kernel.org/doc/html/latest/admin-guide/device-mapper/verity.html
[2] https://chromium.googlesource.com/chromiumos/platform2/+/HEAD/dlcservice/docs/developer.md
Signed-off-by: Matthias Kaehlcke <[email protected]>
Acked-by: Mike Snitzer <[email protected]>
Link: https://lore.kernel.org/lkml/20220627083512.v7.2.I01c67af41d2f6525c6d023101671d7339a9bc8b5@changeid
Signed-off-by: Kees Cook <[email protected]>
|
|
When the ima-modsig is enabled, the rc passed to evm_verifyxattr() may be
negative, which may cause the integer overflow problem.
Fixes: 39b07096364a ("ima: Implement support for module-style appended signatures")
Signed-off-by: Huaxin Lu <[email protected]>
Signed-off-by: Mimi Zohar <[email protected]>
|
|
Although the violation digest in the IMA measurement list is always
zeroes, the size of the digest should be based on the hash algorithm.
Until recently the hash algorithm was hard coded to sha1. Fix the
violation digest size included in the IMA measurement list.
This is just a cosmetic change which should not affect attestation.
Reported-by: Stefan Berger <[email protected]>
Fixes: 09091c44cb73 ("ima: use IMA default hash algorithm for integrity violations")
Tested-by: Stefan Berger <[email protected]>
Signed-off-by: Mimi Zohar <[email protected]>
|
|
With some of the stricter type checking in KUnit's EXPECT macros
removed, several casts in policy_unpack_test are no longer required.
Remove the unnecessary casts, making the conditions clearer.
Reviewed-by: Brendan Higgins <[email protected]>
Acked-by: John Johansen <[email protected]>
Signed-off-by: David Gow <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
On kexec file load, the Integrity Measurement Architecture (IMA)
subsystem may verify the IMA signature of the kernel and initramfs, and
measure it. The command line parameters passed to the kernel in the
kexec call may also be measured by IMA.
A remote attestation service can verify a TPM quote based on the TPM
event log, the IMA measurement list and the TPM PCR data. This can
be achieved only if the IMA measurement log is carried over from the
current kernel to the next kernel across the kexec call.
PowerPC and ARM64 both achieve this using device tree with a
"linux,ima-kexec-buffer" node. x86 platforms generally don't make use of
device tree, so use the setup_data mechanism to pass the IMA buffer to
the new kernel.
Signed-off-by: Jonathan McDowell <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Reviewed-by: Mimi Zohar <[email protected]> # IMA function definitions
Link: https://lore.kernel.org/r/YmKyvlF3my1yWTvK@noodles-fedora-PC23Y6EG
|
|
Do fine-grained Kconfig for all the various retbleed parts.
NOTE: if your compiler doesn't support return thunks this will
silently 'upgrade' your mitigation to IBPB, you might not like this.
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
|
|
Now that we introduced new infrastructure to increase the type safety
for filesystems supporting idmapped mounts port the first part of the
vfs over to them.
This ports the attribute changes codepaths to rely on the new better
helpers using a dedicated type.
Before this change we used to take a shortcut and place the actual
values that would be written to inode->i_{g,u}id into struct iattr. This
had the advantage that we moved idmappings mostly out of the picture
early on but it made reasoning about changes more difficult than it
should be.
The filesystem was never explicitly told that it dealt with an idmapped
mount. The transition to the value that needed to be stored in
inode->i_{g,u}id appeared way too early and increased the probability of
bugs in various codepaths.
We know place the same value in struct iattr no matter if this is an
idmapped mount or not. The vfs will only deal with type safe
vfs{g,u}id_t. This makes it massively safer to perform permission checks
as the type will tell us what checks we need to perform and what helpers
we need to use.
Fileystems raising FS_ALLOW_IDMAP can't simply write ia_vfs{g,u}id to
inode->i_{g,u}id since they are different types. Instead they need to
use the dedicated vfs{g,u}id_to_k{g,u}id() helpers that map the
vfs{g,u}id into the filesystem.
The other nice effect is that filesystems like overlayfs don't need to
care about idmappings explicitly anymore and can simply set up struct
iattr accordingly directly.
Link: https://lore.kernel.org/lkml/CAHk-=win6+ahs1EwLkcq8apqLi_1wXFWbrPf340zYEhObpz4jA@mail.gmail.com [1]
Link: https://lore.kernel.org/r/[email protected]
Cc: Seth Forshee <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: Aleksa Sarai <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Al Viro <[email protected]>
CC: [email protected]
Reviewed-by: Seth Forshee <[email protected]>
Signed-off-by: Christian Brauner (Microsoft) <[email protected]>
|
|
Before this change we used to take a shortcut and place the actual
values that would be written to inode->i_{g,u}id into struct iattr. This
had the advantage that we moved idmappings mostly out of the picture
early on but it made reasoning about changes more difficult than it
should be.
The filesystem was never explicitly told that it dealt with an idmapped
mount. The transition to the value that needed to be stored in
inode->i_{g,u}id appeared way too early and increased the probability of
bugs in various codepaths.
We know place the same value in struct iattr no matter if this is an
idmapped mount or not. The vfs will only deal with type safe
vfs{g,u}id_t. This makes it massively safer to perform permission checks
as the type will tell us what checks we need to perform and what helpers
we need to use.
Adapt the security_inode_setattr() helper to pass down the mount's
idmapping to account for that change.
Link: https://lore.kernel.org/r/[email protected]
Cc: Seth Forshee <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: Aleksa Sarai <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Al Viro <[email protected]>
CC: [email protected]
Reviewed-by: Seth Forshee <[email protected]>
Signed-off-by: Christian Brauner (Microsoft) <[email protected]>
|
|
Earlier we introduced new helpers to abstract ownership update and
remove code duplication. This converts all filesystems supporting
idmapped mounts to make use of these new helpers.
For now we always pass the initial idmapping which makes the idmapping
functions these helpers call nops.
This is done because we currently always pass the actual value to be
written to i_{g,u}id via struct iattr. While this allowed us to treat
the {g,u}id values in struct iattr as values that can be directly
written to inode->i_{g,u}id it also increases the potential for
confusion for filesystems.
Now that we are have dedicated types to prevent this confusion we will
ultimately only map the value from the idmapped mount into a filesystem
value that can be written to inode->i_{g,u}id when the filesystem
actually updates the inode. So pass down the initial idmapping until we
finished that conversion at which point we pass down the mount's
idmapping.
No functional changes intended.
Link: https://lore.kernel.org/r/[email protected]
Cc: Seth Forshee <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: Aleksa Sarai <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Al Viro <[email protected]>
CC: [email protected]
Reviewed-by: Seth Forshee <[email protected]>
Signed-off-by: Christian Brauner (Microsoft) <[email protected]>
|
|
The selinux_add_opt() function may need to allocate memory for the
mount options if none has already been allocated, but there is no
need to free that memory on error as the callers handle that. Drop
the existing kfree() on error to help increase consistency in the
selinux_add_opt() error handling.
This patch also changes selinux_add_opt() to return -EINVAL when
the mount option value, @s, is NULL. It currently return -ENOMEM.
Link: https://lore.kernel.org/lkml/[email protected]/T/
Suggested-by: Paul Moore <[email protected]>
Signed-off-by: Xiu Jianfeng <[email protected]>
[PM: fix subject, rework commit description language]
Signed-off-by: Paul Moore <[email protected]>
|
|
`selinux_add_opt()` stopped taking ownership of the passed context since
commit 70f4169ab421 ("selinux: parse contexts for mount options early").
unreferenced object 0xffff888114dfd140 (size 64):
comm "mount", pid 15182, jiffies 4295687028 (age 796.340s)
hex dump (first 32 bytes):
73 79 73 74 65 6d 5f 75 3a 6f 62 6a 65 63 74 5f system_u:object_
72 3a 74 65 73 74 5f 66 69 6c 65 73 79 73 74 65 r:test_filesyste
backtrace:
[<ffffffffa07dbef4>] kmemdup_nul+0x24/0x80
[<ffffffffa0d34253>] selinux_sb_eat_lsm_opts+0x293/0x560
[<ffffffffa0d13f08>] security_sb_eat_lsm_opts+0x58/0x80
[<ffffffffa0af1eb2>] generic_parse_monolithic+0x82/0x180
[<ffffffffa0a9c1a5>] do_new_mount+0x1f5/0x550
[<ffffffffa0a9eccb>] path_mount+0x2ab/0x1570
[<ffffffffa0aa019e>] __x64_sys_mount+0x20e/0x280
[<ffffffffa1f47124>] do_syscall_64+0x34/0x80
[<ffffffffa200007e>] entry_SYSCALL_64_after_hwframe+0x46/0xb0
unreferenced object 0xffff888108e71640 (size 64):
comm "fsmount", pid 7607, jiffies 4295044974 (age 1601.016s)
hex dump (first 32 bytes):
73 79 73 74 65 6d 5f 75 3a 6f 62 6a 65 63 74 5f system_u:object_
72 3a 74 65 73 74 5f 66 69 6c 65 73 79 73 74 65 r:test_filesyste
backtrace:
[<ffffffff861dc2b1>] memdup_user+0x21/0x90
[<ffffffff861dc367>] strndup_user+0x47/0xa0
[<ffffffff864f6965>] __do_sys_fsconfig+0x485/0x9f0
[<ffffffff87940124>] do_syscall_64+0x34/0x80
[<ffffffff87a0007e>] entry_SYSCALL_64_after_hwframe+0x46/0xb0
Cc: [email protected]
Fixes: 70f4169ab421 ("selinux: parse contexts for mount options early")
Signed-off-by: Christian Göttsche <[email protected]>
Signed-off-by: Paul Moore <[email protected]>
|
|
This reverts commit ccf11dbaa07b328fa469415c362d33459c140a37.
Commit ccf11dbaa07b ("evm: Fix memleak in init_desc") said there is
memleak in init_desc. That may be incorrect, as we can see, tmp_tfm is
saved in one of the two global variables hmac_tfm or evm_tfm[hash_algo],
then if init_desc is called next time, there is no need to alloc tfm
again, so in the error path of kmalloc desc or crypto_shash_init(desc),
It is not a problem without freeing tmp_tfm.
And also that commit did not reset the global variable to NULL after
freeing tmp_tfm and this makes *tfm a dangling pointer which may cause a
UAF issue.
Reported-by: Guozihua (Scott) <[email protected]>
Signed-off-by: Xiu Jianfeng <[email protected]>
Signed-off-by: Mimi Zohar <[email protected]>
|
|
Just like next_entry(), boundary check is necessary to prevent memory
out-of-bound access.
Signed-off-by: Xiu Jianfeng <[email protected]>
Signed-off-by: Paul Moore <[email protected]>
|
|
In this function, it directly returns the result of __security_read_policy
without freeing the allocated memory in *data, cause memory leak issue,
so free the memory if __security_read_policy failed.
Signed-off-by: Xiu Jianfeng <[email protected]>
[PM: subject line tweak]
Signed-off-by: Paul Moore <[email protected]>
|
|
Signed-off-by: Jonas Lindner <[email protected]>
[PM: fixed duplicated subject line]
Signed-off-by: Paul Moore <[email protected]>
|
|
When creating (sealing) a new trusted key, migratable
trusted keys have the FIXED_TPM and FIXED_PARENT attributes
set, and non-migratable keys don't. This is backwards, and
also causes creation to fail when creating a migratable key
under a migratable parent. (The TPM thinks you are trying to
seal a non-migratable blob under a migratable parent.)
The following simple patch fixes the logic, and has been
tested for all four combinations of migratable and non-migratable
trusted keys and parent storage keys. With this logic, you will
get a proper failure if you try to create a non-migratable
trusted key under a migratable parent storage key, and all other
combinations work correctly.
Cc: [email protected] # v5.13+
Fixes: e5fb5d2c5a03 ("security: keys: trusted: Make sealed key properly interoperable")
Signed-off-by: David Safford <[email protected]>
Reviewed-by: Ahmad Fatoum <[email protected]>
Reviewed-by: Jarkko Sakkinen <[email protected]>
Signed-off-by: Jarkko Sakkinen <[email protected]>
|
|
Commit e3489f8974e1 ("selinux: kill selinux_sb_get_mnt_opts()")
introduced a NULL check on the context after a successful call to
security_sid_to_context(). This is on the one hand redundant after
checking for success and on the other hand insufficient on an actual
NULL pointer, since the context is passed to seq_escape() leading to a
call of strlen() on it.
Reported by Clang analyzer:
In file included from security/selinux/hooks.c:28:
In file included from ./include/linux/tracehook.h:50:
In file included from ./include/linux/memcontrol.h:13:
In file included from ./include/linux/cgroup.h:18:
./include/linux/seq_file.h:136:25: warning: Null pointer passed as 1st argument to string length function [unix.cstring.NullArg]
seq_escape_mem(m, src, strlen(src), flags, esc);
^~~~~~~~~~~
Signed-off-by: Christian Göttsche <[email protected]>
Signed-off-by: Paul Moore <[email protected]>
|
|
Randomize the layout of struct selinux_audit_data as suggested in [1],
since it contains a pointer to struct selinux_state, an already
randomized strucure.
[1]: https://github.com/KSPP/linux/issues/188
Signed-off-by: GONG, Ruiqi <[email protected]>
Signed-off-by: Paul Moore <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull mount handling updates from Al Viro:
"Cleanups (and one fix) around struct mount handling.
The fix is usermode_driver.c one - once you've done kern_mount(), you
must kern_unmount(); simple mntput() will end up with a leak. Several
failure exits in there messed up that way... In practice you won't hit
those particular failure exits without fault injection, though"
* tag 'pull-18-rc1-work.mount' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
move mount-related externs from fs.h to mount.h
blob_to_mnt(): kern_unmount() is needed to undo kern_mount()
m->mnt_root->d_inode->i_sb is a weird way to spell m->mnt_sb...
linux/mount.h: trim includes
uninline may_mount() and don't opencode it in fspick(2)/fsopen(2)
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull KUnit updates from Shuah Khan:
"Several fixes, cleanups, and enhancements to tests and framework:
- introduce _NULL and _NOT_NULL macros to pointer error checks
- rework kunit_resource allocation policy to fix memory leaks when
caller doesn't specify free() function to be used when allocating
memory using kunit_add_resource() and kunit_alloc_resource() funcs.
- add ability to specify suite-level init and exit functions"
* tag 'linux-kselftest-kunit-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (41 commits)
kunit: tool: Use qemu-system-i386 for i386 runs
kunit: fix executor OOM error handling logic on non-UML
kunit: tool: update riscv QEMU config with new serial dependency
kcsan: test: use new suite_{init,exit} support
kunit: tool: Add list of all valid test configs on UML
kunit: take `kunit_assert` as `const`
kunit: tool: misc cleanups
kunit: tool: minor cosmetic cleanups in kunit_parser.py
kunit: tool: make parser stop overwriting status of suites w/ no_tests
kunit: tool: remove dead parse_crash_in_log() logic
kunit: tool: print clearer error message when there's no TAP output
kunit: tool: stop using a shell to run kernel under QEMU
kunit: tool: update test counts summary line format
kunit: bail out of test filtering logic quicker if OOM
lib/Kconfig.debug: change KUnit tests to default to KUNIT_ALL_TESTS
kunit: Rework kunit_resource allocation policy
kunit: fix debugfs code to use enum kunit_status, not bool
kfence: test: use new suite_{init/exit} support, add .kunitconfig
kunit: add ability to specify suite-level init and exit functions
kunit: rename print_subtest_{start,end} for clarity (s/subtest/suite)
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity
Pull IMA updates from Mimi Zohar:
"New is IMA support for including fs-verity file digests and signatures
in the IMA measurement list as well as verifying the fs-verity file
digest based signatures, both based on policy.
In addition, are two bug fixes:
- avoid reading UEFI variables, which cause a page fault, on Apple
Macs with T2 chips.
- remove the original "ima" template Kconfig option to address a boot
command line ordering issue.
The rest is a mixture of code/documentation cleanup"
* tag 'integrity-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
integrity: Fix sparse warnings in keyring_handler
evm: Clean up some variables
evm: Return INTEGRITY_PASS for enum integrity_status value '0'
efi: Do not import certificates from UEFI Secure Boot for T2 Macs
fsverity: update the documentation
ima: support fs-verity file digest based version 3 signatures
ima: permit fsverity's file digests in the IMA measurement list
ima: define a new template field named 'd-ngv2' and templates
fs-verity: define a function to return the integrity protected file digest
ima: use IMA default hash algorithm for integrity violations
ima: fix 'd-ng' comments and documentation
ima: remove the IMA_TEMPLATE Kconfig option
ima: remove redundant initialization of pointer 'file'.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd
Pull tpm updates from Jarkko Sakkinen:
- Tightened validation of key hashes for SYSTEM_BLACKLIST_HASH_LIST. An
invalid hash format causes a compilation error. Previously, they got
included to the kernel binary but were silently ignored at run-time.
- Allow root user to append new hashes to the blacklist keyring.
- Trusted keys backed with Cryptographic Acceleration and Assurance
Module (CAAM), which part of some of the new NXP's SoC's. Now there
is total three hardware backends for trusted keys: TPM, ARM TEE and
CAAM.
- A scattered set of fixes and small improvements for the TPM driver.
* tag 'tpmdd-next-v5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
MAINTAINERS: add KEYS-TRUSTED-CAAM
doc: trusted-encrypted: describe new CAAM trust source
KEYS: trusted: Introduce support for NXP CAAM-based trusted keys
crypto: caam - add in-kernel interface for blob generator
crypto: caam - determine whether CAAM supports blob encap/decap
KEYS: trusted: allow use of kernel RNG for key material
KEYS: trusted: allow use of TEE as backend without TCG_TPM support
tpm: Add field upgrade mode support for Infineon TPM2 modules
tpm: Fix buffer access in tpm2_get_tpm_pt()
char: tpm: cr50_i2c: Suppress duplicated error message in .remove()
tpm: cr50: Add new device/vendor ID 0x504a6666
tpm: Remove read16/read32/write32 calls from tpm_tis_phy_ops
tpm: ibmvtpm: Correct the return value in tpm_ibmvtpm_probe()
tpm/tpm_ftpm_tee: Return true/false (not 1/0) from bool functions
certs: Explain the rationale to call panic()
certs: Allow root user to append signed hashes to the blacklist keyring
certs: Check that builtin blacklist hashes are valid
certs: Make blacklist_vet_description() more strict
certs: Factor out the blacklist hash creation
tools/certs: Add print-cert-tbs-hash.sh
|
|
Pull smack update from Casey Schaufler:
"A single change to remove a pointless assignment"
* tag 'Smack-for-5.19' of https://github.com/cschaufler/smack-next:
smack: Remove redundant assignments
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux
Pull Landlock updates from Mickaël Salaün:
- improve the path_rename LSM hook implementations for RENAME_EXCHANGE;
- fix a too-restrictive filesystem control for a rare corner case;
- set the nested sandbox limitation to 16 layers;
- add a new LANDLOCK_ACCESS_FS_REFER access right to properly handle
file reparenting (i.e. full rename and link support);
- add new tests and documentation;
- format code with clang-format to make it easier to maintain and
contribute.
* tag 'landlock-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux: (30 commits)
landlock: Explain how to support Landlock
landlock: Add design choices documentation for filesystem access rights
landlock: Document good practices about filesystem policies
landlock: Document LANDLOCK_ACCESS_FS_REFER and ABI versioning
samples/landlock: Add support for file reparenting
selftests/landlock: Add 11 new test suites dedicated to file reparenting
landlock: Add support for file reparenting with LANDLOCK_ACCESS_FS_REFER
LSM: Remove double path_rename hook calls for RENAME_EXCHANGE
landlock: Move filesystem helpers and add a new one
landlock: Fix same-layer rule unions
landlock: Create find_rule() from unmask_layers()
landlock: Reduce the maximum number of layers to 16
landlock: Define access_mask_t to enforce a consistent access mask size
selftests/landlock: Test landlock_create_ruleset(2) argument check ordering
landlock: Change landlock_restrict_self(2) check ordering
landlock: Change landlock_add_rule(2) argument check ordering
selftests/landlock: Add tests for O_PATH
selftests/landlock: Fully test file rename with "remove" access
selftests/landlock: Extend access right tests to directories
selftests/landlock: Add tests for unknown access rights
...
|