Age | Commit message (Collapse) | Author | Files | Lines |
|
git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux
Pull chrome platform firmware updates from Tzung-Bi Shih:
- Allow userspace to automatically load coreboot modules by adding
modaliases and sending uevents
- Make bus_type const
* tag 'tag-chrome-platform-firmware-for-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
firmware: coreboot: Replace tag with id table in driver struct
firmware: coreboot: Generate aliases for coreboot modules
firmware: coreboot: Generate modalias uevent for devices
firmware: coreboot: make coreboot_bus_type const
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Large effort by Eric to lower rtnl_lock pressure and remove locks:
- Make commonly used parts of rtnetlink (address, route dumps
etc) lockless, protected by RCU instead of rtnl_lock.
- Add a netns exit callback which already holds rtnl_lock,
allowing netns exit to take rtnl_lock once in the core instead
of once for each driver / callback.
- Remove locks / serialization in the socket diag interface.
- Remove 6 calls to synchronize_rcu() while holding rtnl_lock.
- Remove the dev_base_lock, depend on RCU where necessary.
- Support busy polling on a per-epoll context basis. Poll length and
budget parameters can be set independently of system defaults.
- Introduce struct net_hotdata, to make sure read-mostly global
config variables fit in as few cache lines as possible.
- Add optional per-nexthop statistics to ease monitoring / debug of
ECMP imbalance problems.
- Support TCP_NOTSENT_LOWAT in MPTCP.
- Ensure that IPv6 temporary addresses' preferred lifetimes are long
enough, compared to other configured lifetimes, and at least 2 sec.
- Support forwarding of ICMP Error messages in IPSec, per RFC 4301.
- Add support for the independent control state machine for bonding
per IEEE 802.1AX-2008 5.4.15 in addition to the existing coupled
control state machine.
- Add "network ID" to MCTP socket APIs to support hosts with multiple
disjoint MCTP networks.
- Re-use the mono_delivery_time skbuff bit for packets which user
space wants to be sent at a specified time. Maintain the timing
information while traversing veth links, bridge etc.
- Take advantage of MSG_SPLICE_PAGES for RxRPC DATA and ACK packets.
- Simplify many places iterating over netdevs by using an xarray
instead of a hash table walk (hash table remains in place, for use
on fastpaths).
- Speed up scanning for expired routes by keeping a dedicated list.
- Speed up "generic" XDP by trying harder to avoid large allocations.
- Support attaching arbitrary metadata to netconsole messages.
Things we sprinkled into general kernel code:
- Enforce VM_IOREMAP flag and range in ioremap_page_range and
introduce VM_SPARSE kind and vm_area_[un]map_pages (used by
bpf_arena).
- Rework selftest harness to enable the use of the full range of ksft
exit code (pass, fail, skip, xfail, xpass).
Netfilter:
- Allow userspace to define a table that is exclusively owned by a
daemon (via netlink socket aliveness) without auto-removing this
table when the userspace program exits. Such table gets marked as
orphaned and a restarting management daemon can re-attach/regain
ownership.
- Speed up element insertions to nftables' concatenated-ranges set
type. Compact a few related data structures.
BPF:
- Add BPF token support for delegating a subset of BPF subsystem
functionality from privileged system-wide daemons such as systemd
through special mount options for userns-bound BPF fs to a trusted
& unprivileged application.
- Introduce bpf_arena which is sparse shared memory region between
BPF program and user space where structures inside the arena can
have pointers to other areas of the arena, and pointers work
seamlessly for both user-space programs and BPF programs.
- Introduce may_goto instruction that is a contract between the
verifier and the program. The verifier allows the program to loop
assuming it's behaving well, but reserves the right to terminate
it.
- Extend the BPF verifier to enable static subprog calls in spin lock
critical sections.
- Support registration of struct_ops types from modules which helps
projects like fuse-bpf that seeks to implement a new struct_ops
type.
- Add support for retrieval of cookies for perf/kprobe multi links.
- Support arbitrary TCP SYN cookie generation / validation in the TC
layer with BPF to allow creating SYN flood handling in BPF
firewalls.
- Add code generation to inline the bpf_kptr_xchg() helper which
improves performance when stashing/popping the allocated BPF
objects.
Wireless:
- Add SPP (signaling and payload protected) AMSDU support.
- Support wider bandwidth OFDMA, as required for EHT operation.
Driver API:
- Major overhaul of the Energy Efficient Ethernet internals to
support new link modes (2.5GE, 5GE), share more code between
drivers (especially those using phylib), and encourage more
uniform behavior. Convert and clean up drivers.
- Define an API for querying per netdev queue statistics from
drivers.
- IPSec: account in global stats for fully offloaded sessions.
- Create a concept of Ethernet PHY Packages at the Device Tree level,
to allow parameterizing the existing PHY package code.
- Enable Rx hashing (RSS) on GTP protocol fields.
Misc:
- Improvements and refactoring all over networking selftests.
- Create uniform module aliases for TC classifiers, actions, and
packet schedulers to simplify creating modprobe policies.
- Address all missing MODULE_DESCRIPTION() warnings in networking.
- Extend the Netlink descriptions in YAML to cover message
encapsulation or "Netlink polymorphism", where interpretation of
nested attributes depends on link type, classifier type or some
other "class type".
Drivers:
- Ethernet high-speed NICs:
- Add a new driver for Marvell's Octeon PCI Endpoint NIC VF.
- Intel (100G, ice, idpf):
- support E825-C devices
- nVidia/Mellanox:
- support devices with one port and multiple PCIe links
- Broadcom (bnxt):
- support n-tuple filters
- support configuring the RSS key
- Wangxun (ngbe/txgbe):
- implement irq_domain for TXGBE's sub-interrupts
- Pensando/AMD:
- support XDP
- optimize queue submission and wakeup handling (+17% bps)
- optimize struct layout, saving 28% of memory on queues
- Ethernet NICs embedded and virtual:
- Google cloud vNIC:
- refactor driver to perform memory allocations for new queue
config before stopping and freeing the old queue memory
- Synopsys (stmmac):
- obey queueMaxSDU and implement counters required by 802.1Qbv
- Renesas (ravb):
- support packet checksum offload
- suspend to RAM and runtime PM support
- Ethernet switches:
- nVidia/Mellanox:
- support for nexthop group statistics
- Microchip:
- ksz8: implement PHY loopback
- add support for KSZ8567, a 7-port 10/100Mbps switch
- PTP:
- New driver for RENESAS FemtoClock3 Wireless clock generator.
- Support OCP PTP cards designed and built by Adva.
- CAN:
- Support recvmsg() flags for own, local and remote traffic on CAN
BCM sockets.
- Support for esd GmbH PCIe/402 CAN device family.
- m_can:
- Rx/Tx submission coalescing
- wake on frame Rx
- WiFi:
- Intel (iwlwifi):
- enable signaling and payload protected A-MSDUs
- support wider-bandwidth OFDMA
- support for new devices
- bump FW API to 89 for AX devices; 90 for BZ/SC devices
- MediaTek (mt76):
- mt7915: newer ADIE version support
- mt7925: radio temperature sensor support
- Qualcomm (ath11k):
- support 6 GHz station power modes: Low Power Indoor (LPI),
Standard Power) SP and Very Low Power (VLP)
- QCA6390 & WCN6855: support 2 concurrent station interfaces
- QCA2066 support
- Qualcomm (ath12k):
- refactoring in preparation for Multi-Link Operation (MLO)
support
- 1024 Block Ack window size support
- firmware-2.bin support
- support having multiple identical PCI devices (firmware needs
to have ATH12K_FW_FEATURE_MULTI_QRTR_ID)
- QCN9274: support split-PHY devices
- WCN7850: enable Power Save Mode in station mode
- WCN7850: P2P support
- RealTek:
- rtw88: support for more rtw8811cu and rtw8821cu devices
- rtw89: support SCAN_RANDOM_SN and SET_SCAN_DWELL
- rtlwifi: speed up USB firmware initialization
- rtwl8xxxu:
- RTL8188F: concurrent interface support
- Channel Switch Announcement (CSA) support in AP mode
- Broadcom (brcmfmac):
- per-vendor feature support
- per-vendor SAE password setup
- DMI nvram filename quirk for ACEPC W5 Pro"
* tag 'net-next-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2255 commits)
nexthop: Fix splat with CONFIG_DEBUG_PREEMPT=y
nexthop: Fix out-of-bounds access during attribute validation
nexthop: Only parse NHA_OP_FLAGS for dump messages that require it
nexthop: Only parse NHA_OP_FLAGS for get messages that require it
bpf: move sleepable flag from bpf_prog_aux to bpf_prog
bpf: hardcode BPF_PROG_PACK_SIZE to 2MB * num_possible_nodes()
selftests/bpf: Add kprobe multi triggering benchmarks
ptp: Move from simple ida to xarray
vxlan: Remove generic .ndo_get_stats64
vxlan: Do not alloc tstats manually
devlink: Add comments to use netlink gen tool
nfp: flower: handle acti_netdevs allocation failure
net/packet: Add getsockopt support for PACKET_COPY_THRESH
net/netlink: Add getsockopt support for NETLINK_LISTEN_ALL_NSID
selftests/bpf: Add bpf_arena_htab test.
selftests/bpf: Add bpf_arena_list test.
selftests/bpf: Add unit tests for bpf_arena_alloc/free_pages
bpf: Add helper macro bpf_addr_space_cast()
libbpf: Recognize __arena global variables.
bpftool: Recognize arena map type
...
|
|
Pull documentation updates from Jonathan Corbet:
"A moderatly busy cycle for development this time around.
- Some cleanup of the main index page for easier navigation
- Rework some of the other top-level pages for better readability
and, with luck, fewer merge conflicts in the future.
- Submit-checklist improvements, hopefully the first of many.
- New Italian translations
- A fair number of kernel-doc fixes and improvements. We have also
dropped the recommendation to use an old version of Sphinx.
- A new document from Thorsten on bisection
... and lots of fixes and updates"
* tag 'docs-6.9' of git://git.lwn.net/linux: (54 commits)
docs: verify/bisect: fixes, finetuning, and support for Arch
docs: Makefile: Add dependency to $(YNL_INDEX) for targets other than htmldocs
docs: Move ja_JP/howto.rst to ja_JP/process/howto.rst
docs: submit-checklist: use subheadings
docs: submit-checklist: structure by category
docs: new text on bisecting which also covers bug validation
docs: drop the version constraints for sphinx and dependencies
docs: kerneldoc-preamble.sty: Remove code for Sphinx <2.4
docs: Restore "smart quotes" for quotes
docs/zh_CN: accurate translation of "function"
docs: Include simplified link titles in main index
docs: Correct formatting of title in admin-guide/index.rst
docs: kernel_feat.py: fix build error for missing files
MAINTAINERS: Set the field name for subsystem profile section
kasan: Add documentation for CONFIG_KASAN_EXTRA_INFO
Fixed case issue with 'fault-injection' in documentation
kernel-doc: handle #if in enums as well
Documentation: update mailing list addresses
doc: kerneldoc.py: fix indentation
scripts/kernel-doc: simplify signature printing
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening updates from Kees Cook:
"As is pretty normal for this tree, there are changes all over the
place, especially for small fixes, selftest improvements, and improved
macro usability.
Some header changes ended up landing via this tree as they depended on
the string header cleanups. Also, a notable set of changes is the work
for the reintroduction of the UBSAN signed integer overflow sanitizer
so that we can continue to make improvements on the compiler side to
make this sanitizer a more viable future security hardening option.
Summary:
- string.h and related header cleanups (Tanzir Hasan, Andy
Shevchenko)
- VMCI memcpy() usage and struct_size() cleanups (Vasiliy Kovalev,
Harshit Mogalapalli)
- selftests/powerpc: Fix load_unaligned_zeropad build failure
(Michael Ellerman)
- hardened Kconfig fragment updates (Marco Elver, Lukas Bulwahn)
- Handle tail call optimization better in LKDTM (Douglas Anderson)
- Use long form types in overflow.h (Andy Shevchenko)
- Add flags param to string_get_size() (Andy Shevchenko)
- Add Coccinelle script for potential struct_size() use (Jacob
Keller)
- Fix objtool corner case under KCFI (Josh Poimboeuf)
- Drop 13 year old backward compat CAP_SYS_ADMIN check (Jingzi Meng)
- Add str_plural() helper (Michal Wajdeczko, Kees Cook)
- Ignore relocations in .notes section
- Add comments to explain how __is_constexpr() works
- Fix m68k stack alignment expectations in stackinit Kunit test
- Convert string selftests to KUnit
- Add KUnit tests for fortified string functions
- Improve reporting during fortified string warnings
- Allow non-type arg to type_max() and type_min()
- Allow strscpy() to be called with only 2 arguments
- Add binary mode to leaking_addresses scanner
- Various small cleanups to leaking_addresses scanner
- Adding wrapping_*() arithmetic helper
- Annotate initial signed integer wrap-around in refcount_t
- Add explicit UBSAN section to MAINTAINERS
- Fix UBSAN self-test warnings
- Simplify UBSAN build via removal of CONFIG_UBSAN_SANITIZE_ALL
- Reintroduce UBSAN's signed overflow sanitizer"
* tag 'hardening-v6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (51 commits)
selftests/powerpc: Fix load_unaligned_zeropad build failure
string: Convert helpers selftest to KUnit
string: Convert selftest to KUnit
sh: Fix build with CONFIG_UBSAN=y
compiler.h: Explain how __is_constexpr() works
overflow: Allow non-type arg to type_max() and type_min()
VMCI: Fix possible memcpy() run-time warning in vmci_datagram_invoke_guest_handler()
lib/string_helpers: Add flags param to string_get_size()
x86, relocs: Ignore relocations in .notes section
objtool: Fix UNWIND_HINT_{SAVE,RESTORE} across basic blocks
overflow: Use POD in check_shl_overflow()
lib: stackinit: Adjust target string to 8 bytes for m68k
sparc: vdso: Disable UBSAN instrumentation
kernel.h: Move lib/cmdline.c prototypes to string.h
leaking_addresses: Provide mechanism to scan binary files
leaking_addresses: Ignore input device status lines
leaking_addresses: Use File::Temp for /tmp files
MAINTAINERS: Update LEAKING_ADDRESSES details
fortify: Improve buffer overflow reporting
fortify: Add KUnit tests for runtime overflows
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic updates from Arnd Bergmann:
"Just two small updates this time:
- A series I did to unify the definition of PAGE_SIZE through
Kconfig, intended to help with a vdso rework that needs the
constant but cannot include the normal kernel headers when building
the compat VDSO on arm64 and potentially others
- a patch from Yan Zhao to remove the pfn_to_virt() definitions from
a couple of architectures after finding they were both incorrect
and entirely unused"
* tag 'asm-generic-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
arch: define CONFIG_PAGE_SIZE_*KB on all architectures
arch: simplify architecture specific page size configuration
arch: consolidate existing CONFIG_PAGE_SIZE_*KB definitions
mm: Remove broken pfn_to_virt() on arch csky/hexagon/openrisc
|
|
Pull SoC device tree updates from Arnd Bergmann:
"There is very little going on with new SoC support this time, all the
new chips are variations of others that we already support, and they
are all based on ARMv8 cores:
- Mediatek MT7981B (Filogic 820) and MT7988A (Filogic 880) are
networking SoCs designed to be used in wireless routers, similar to
the already supported MT7986A (Filogic 830).
- NXP i.MX8DXP is a variant of i.MX8QXP, with two CPU cores less.
These are used in many embedded and industrial applications.
- Renesas R8A779G2 (R-Car V4H ES2.0) and R8A779H0 (R-Car V4M) are
automotive SoCs.
- TI J722S is another automotive variant of its K3 family, related to
the AM62 series.
There are a total of 7 new arm32 machines and 45 arm64 ones, including
- Two Android phones based on the old Tegra30 chip
- Two machines using Cortex-A53 SoCs from Allwinner, a mini PC and a
SoM development board
- A set-top box using Amlogic Meson G12A S905X2
- Eight embedded board using NXP i.MX6/8/9
- Three machines using Mediatek network router chips
- Ten Chromebooks, all based on Mediatek MT8186
- One development board based on Mediatek MT8395 (Genio 1200)
- Seven tablets and phones based on Qualcomm SoCs, most of them from
Samsung.
- A third development board for Qualcomm SM8550 (Snapdragon 8 Gen 2)
- Three variants of the "White Hawk" board for Renesas automotive
SoCs
- Ten Rockchips RK35xx based machines, including NAS, Tablet, Game
console and industrial form factors.
- Three evaluation boards for TI K3 based SoCs
The other changes are mainly the usual feature additions for existing
hardware, cleanups, and dtc compile time fixes. One notable change is
the inclusion of PowerVR SGX GPU nodes on TI SoCs"
* tag 'soc-dt-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (824 commits)
riscv: dts: Move BUILTIN_DTB_SOURCE to common Kconfig
riscv: dts: starfive: jh7100: fix root clock names
ARM: dts: samsung: exynos4412: decrease memory to account for unusable region
arm64: dts: qcom: sm8250-xiaomi-elish: set rotation
arm64: dts: qcom: sm8650: Fix SPMI channels size
arm64: dts: qcom: sm8550: Fix SPMI channels size
arm64: dts: rockchip: Fix name for UART pin header on qnap-ts433
arm: dts: marvell: clearfog-gtr-l8: align port numbers with enclosure
arm: dts: marvell: clearfog-gtr-l8: add support for second sfp connector
dt-bindings: soc: renesas: renesas-soc: Add pattern for gray-hawk
dtc: Enable dtc interrupt_provider check
arm64: dts: st: add video encoder support to stm32mp255
arm64: dts: st: add video decoder support to stm32mp255
ARM: dts: stm32: enable crypto accelerator on stm32mp135f-dk
ARM: dts: stm32: enable CRC on stm32mp135f-dk
ARM: dts: stm32: add CRC on stm32mp131
ARM: dts: add stm32f769-disco-mb1166-reva09
ARM: dts: stm32: add display support on stm32f769-disco
ARM: dts: stm32: rename mmc_vcard to vcc-3v3 on stm32f769-disco
ARM: dts: stm32: add DSI support on stm32f769
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull core x86 updates from Ingo Molnar:
- The biggest change is the rework of the percpu code, to support the
'Named Address Spaces' GCC feature, by Uros Bizjak:
- This allows C code to access GS and FS segment relative memory
via variables declared with such attributes, which allows the
compiler to better optimize those accesses than the previous
inline assembly code.
- The series also includes a number of micro-optimizations for
various percpu access methods, plus a number of cleanups of %gs
accesses in assembly code.
- These changes have been exposed to linux-next testing for the
last ~5 months, with no known regressions in this area.
- Fix/clean up __switch_to()'s broken but accidentally working handling
of FPU switching - which also generates better code
- Propagate more RIP-relative addressing in assembly code, to generate
slightly better code
- Rework the CPU mitigations Kconfig space to be less idiosyncratic, to
make it easier for distros to follow & maintain these options
- Rework the x86 idle code to cure RCU violations and to clean up the
logic
- Clean up the vDSO Makefile logic
- Misc cleanups and fixes
* tag 'x86-core-2024-03-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (52 commits)
x86/idle: Select idle routine only once
x86/idle: Let prefer_mwait_c1_over_halt() return bool
x86/idle: Cleanup idle_setup()
x86/idle: Clean up idle selection
x86/idle: Sanitize X86_BUG_AMD_E400 handling
sched/idle: Conditionally handle tick broadcast in default_idle_call()
x86: Increase brk randomness entropy for 64-bit systems
x86/vdso: Move vDSO to mmap region
x86/vdso/kbuild: Group non-standard build attributes and primary object file rules together
x86/vdso: Fix rethunk patching for vdso-image-{32,64}.o
x86/retpoline: Ensure default return thunk isn't used at runtime
x86/vdso: Use CONFIG_COMPAT_32 to specify vdso32
x86/vdso: Use $(addprefix ) instead of $(foreach )
x86/vdso: Simplify obj-y addition
x86/vdso: Consolidate targets and clean-files
x86/bugs: Rename CONFIG_RETHUNK => CONFIG_MITIGATION_RETHUNK
x86/bugs: Rename CONFIG_CPU_SRSO => CONFIG_MITIGATION_SRSO
x86/bugs: Rename CONFIG_CPU_IBRS_ENTRY => CONFIG_MITIGATION_IBRS_ENTRY
x86/bugs: Rename CONFIG_CPU_UNRET_ENTRY => CONFIG_MITIGATION_UNRET_ENTRY
x86/bugs: Rename CONFIG_SLS => CONFIG_MITIGATION_SLS
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Ingo Molnar:
- Micro-optimize local_xchg() and the rtmutex code on x86
- Fix percpu-rwsem contention tracepoints
- Simplify debugging Kconfig dependencies
- Update/clarify the documentation of atomic primitives
- Misc cleanups
* tag 'locking-core-2024-03-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/rtmutex: Use try_cmpxchg_relaxed() in mark_rt_mutex_waiters()
locking/x86: Implement local_xchg() using CMPXCHG without the LOCK prefix
locking/percpu-rwsem: Trigger contention tracepoints only if contended
locking/rwsem: Make DEBUG_RWSEMS and PREEMPT_RT mutually exclusive
locking/rwsem: Clarify that RWSEM_READER_OWNED is just a hint
locking/mutex: Simplify <linux/mutex.h>
locking/qspinlock: Fix 'wait_early' set but not used warning
locking/atomic: scripts: Clarify ordering of conditional atomics
|
|
Pull Rust updates from Miguel Ojeda:
"Another routine one in terms of features. We got two version upgrades
this time, but in terms of lines, 'alloc' changes are not very large.
Toolchain and infrastructure:
- Upgrade to Rust 1.76.0
This time around, due to how the kernel and Rust schedules have
aligned, there are two upgrades in fact. These allow us to remove
two more unstable features ('const_maybe_uninit_zeroed' and
'ptr_metadata') from the list, among other improvements
- Mark 'rustc' (and others) invocations as recursive, which fixes a
new warning and prepares us for the future in case we eventually
take advantage of the Make jobserver
'kernel' crate:
- Add the 'container_of!' macro
- Stop using the unstable 'ptr_metadata' feature by employing the now
stable 'byte_sub' method to implement 'Arc::from_raw()'
- Add the 'time' module with a 'msecs_to_jiffies()' conversion
function to begin with, to be used by Rust Binder
- Add 'notify_sync()' and 'wait_interruptible_timeout()' methods to
'CondVar', to be used by Rust Binder
- Update integer types for 'CondVar'
- Rename 'wait_list' field to 'wait_queue_head' in 'CondVar'
- Implement 'Display' and 'Debug' for 'BStr'
- Add the 'try_from_foreign()' method to the 'ForeignOwnable' trait
- Add reexports for macros so that they can be used from the right
module (in addition to the root)
- A series of code documentation improvements, including adding
intra-doc links, consistency improvements, typo fixes...
'macros' crate:
- Place generated 'init_module()' function in '.init.text'
Documentation:
- Add documentation on Rust doctests and how they work"
* tag 'rust-6.9' of https://github.com/Rust-for-Linux/linux: (29 commits)
rust: upgrade to Rust 1.76.0
kbuild: mark `rustc` (and others) invocations as recursive
rust: add `container_of!` macro
rust: str: implement `Display` and `Debug` for `BStr`
rust: module: place generated init_module() function in .init.text
rust: types: add `try_from_foreign()` method
docs: rust: Add description of Rust documentation test as KUnit ones
docs: rust: Move testing to a separate page
rust: kernel: stop using ptr_metadata feature
rust: kernel: add reexports for macros
rust: locked_by: shorten doclink preview
rust: kernel: remove unneeded doclink targets
rust: kernel: add doclinks
rust: kernel: add blank lines in front of code blocks
rust: kernel: mark code fragments in docs with backticks
rust: kernel: unify spelling of refcount in docs
rust: str: move SAFETY comment in front of unsafe block
rust: str: use `NUL` instead of 0 in doc comments
rust: kernel: add srctree-relative doclinks
rust: ioctl: end top-level module docs with full stop
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"6 hotfixes. 4 are cc:stable and the remainder pertain to post-6.7
issues or aren't considered to be needed in earlier kernel versions"
* tag 'mm-hotfixes-stable-2024-03-07-16-17' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
scripts/gdb/symbols: fix invalid escape sequence warning
mailmap: fix Kishon's email
init/Kconfig: lower GCC version check for -Warray-bounds
mm, mmap: fix vma_merge() case 7 with vma_ops->close
mm: userfaultfd: fix unexpected change to src_folio when UFFDIO_MOVE fails
mm, vmscan: prevent infinite loop for costly GFP_NOIO | __GFP_RETRY_MAYFAIL allocations
|
|
With python 3.12, '\.' results in this warning
SyntaxWarning: invalid escape sequence '\.'
Link: https://lkml.kernel.org/r/20240304012507.240380-1-andrewjballance@gmail.com
Signed-off-by: Andrew Ballance <andrewjballance@gmail.com>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: Koudai Iwahori <koudai@google.com>
Cc: Kuan-Ying Lee <Kuan-Ying.Lee@mediatek.com>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Pankaj Raghav <p.raghav@samsung.com>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Cross-merge networking fixes after downstream PR.
No conflicts.
Adjacent changes:
net/core/page_pool_user.c
0b11b1c5c320 ("netdev: let netlink core handle -EMSGSIZE errors")
429679dcf7d9 ("page_pool: fix netlink dump stop/resume")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
arc, arm64, parisc and powerpc all have their own Kconfig symbols
in place of the common CONFIG_PAGE_SIZE_4KB symbols. Change these
so the common symbols are the ones that are actually used, while
leaving the arhcitecture specific ones as the user visible
place for configuring it, to avoid breaking user configs.
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> (powerpc32)
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Helge Deller <deller@gmx.de> # parisc
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
As discussed (see Links), there is some inertia to move to the recent
Sphinx versions for the doc build environment.
As first step, drop the version constraints and the related comments. As
sphinx depends on jinja2, jinja2 is pulled in automatically. So drop that.
Then, the sphinx-pre-install script will fail though with:
Can't get default sphinx version from ./Documentation/sphinx/requirements.txt at ./scripts/sphinx-pre-install line 305.
The script simply expects to parse a version constraint with Sphinx in the
requirements.txt. That version is used in the script for suggesting the
virtualenv directory name.
To suggest a virtualenv directory name, when there is no version given in
the requirements.txt, one could try to guess the version that would be
downloaded with 'pip install -r Documentation/sphinx/requirements.txt'.
However, there seems no simple way to get that version without actually
setting up the venv and running pip. So, instead, name the directory with
the fixed name 'sphinx_latest'.
Finally update the Sphinx build documentation to reflect this directory
name change.
Link: https://lore.kernel.org/linux-doc/874jf4m384.fsf@meer.lwn.net/
Link: https://lore.kernel.org/linux-doc/20240226093854.47830-1-lukas.bulwahn@gmail.com/
Reviewed-by: Akira Yokosawa <akiyks@gmail.com>
Tested-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20240301141800.30218-1-lukas.bulwahn@gmail.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2024-02-29
We've added 119 non-merge commits during the last 32 day(s) which contain
a total of 150 files changed, 3589 insertions(+), 995 deletions(-).
The main changes are:
1) Extend the BPF verifier to enable static subprog calls in spin lock
critical sections, from Kumar Kartikeya Dwivedi.
2) Fix confusing and incorrect inference of PTR_TO_CTX argument type
in BPF global subprogs, from Andrii Nakryiko.
3) Larger batch of riscv BPF JIT improvements and enabling inlining
of the bpf_kptr_xchg() for RV64, from Pu Lehui.
4) Allow skeleton users to change the values of the fields in struct_ops
maps at runtime, from Kui-Feng Lee.
5) Extend the verifier's capabilities of tracking scalars when they
are spilled to stack, especially when the spill or fill is narrowing,
from Maxim Mikityanskiy & Eduard Zingerman.
6) Various BPF selftest improvements to fix errors under gcc BPF backend,
from Jose E. Marchesi.
7) Avoid module loading failure when the module trying to register
a struct_ops has its BTF section stripped, from Geliang Tang.
8) Annotate all kfuncs in .BTF_ids section which eventually allows
for automatic kfunc prototype generation from bpftool, from Daniel Xu.
9) Several updates to the instruction-set.rst IETF standardization
document, from Dave Thaler.
10) Shrink the size of struct bpf_map resp. bpf_array,
from Alexei Starovoitov.
11) Initial small subset of BPF verifier prepwork for sleepable bpf_timer,
from Benjamin Tissoires.
12) Fix bpftool to be more portable to musl libc by using POSIX's
basename(), from Arnaldo Carvalho de Melo.
13) Add libbpf support to gcc in CORE macro definitions,
from Cupertino Miranda.
14) Remove a duplicate type check in perf_event_bpf_event,
from Florian Lehner.
15) Fix bpf_spin_{un,}lock BPF helpers to actually annotate them
with notrace correctly, from Yonghong Song.
16) Replace the deprecated bpf_lpm_trie_key 0-length array with flexible
array to fix build warnings, from Kees Cook.
17) Fix resolve_btfids cross-compilation to non host-native endianness,
from Viktor Malik.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (119 commits)
selftests/bpf: Test if shadow types work correctly.
bpftool: Add an example for struct_ops map and shadow type.
bpftool: Generated shadow variables for struct_ops maps.
libbpf: Convert st_ops->data to shadow type.
libbpf: Set btf_value_type_id of struct bpf_map for struct_ops.
bpf: Replace bpf_lpm_trie_key 0-length array with flexible array
bpf, arm64: use bpf_prog_pack for memory management
arm64: patching: implement text_poke API
bpf, arm64: support exceptions
arm64: stacktrace: Implement arch_bpf_stack_walk() for the BPF JIT
bpf: add is_async_callback_calling_insn() helper
bpf: introduce in_sleepable() helper
bpf: allow more maps in sleepable bpf programs
selftests/bpf: Test case for lacking CFI stub functions.
bpf: Check cfi_stubs before registering a struct_ops type.
bpf: Clarify batch lookup/lookup_and_delete semantics
bpf, docs: specify which BPF_ABS and BPF_IND fields were zero
bpf, docs: Fix typos in instruction-set.rst
selftests/bpf: update tcp_custom_syncookie to use scalar packet offset
bpf: Shrink size of struct bpf_map/bpf_array.
...
====================
Link: https://lore.kernel.org/r/20240301001625.8800-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- detect ".option arch" support on not-yet-released LLVM builds
- fix missing TLB flush when modifying non-leaf PTEs
- fixes for T-Head custom extensions
- fix for systems with the legacy PMU, that manifests as a crash on
kernels built without SBI PMU support
- fix for systems that clear *envcfg on suspend, which manifests as
cbo.zero trapping after resume
- fixes for Svnapot systems, including removing Svnapot support for
huge vmalloc/vmap regions
* tag 'riscv-for-linus-6.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: Sparse-Memory/vmemmap out-of-bounds fix
riscv: Fix pte_leaf_size() for NAPOT
Revert "riscv: mm: support Svnapot in huge vmap"
riscv: Save/restore envcfg CSR during CPU suspend
riscv: Add a custom ISA extension for the [ms]envcfg CSR
riscv: Fix enabling cbo.zero when running in M-mode
perf: RISCV: Fix panic on pmu overflow handler
MAINTAINERS: Update SiFive driver maintainers
drivers: perf: ctr_get_width function for legacy is not defined
drivers: perf: added capabilities for legacy PMU
RISC-V: Ignore V from the riscv,isa DT property on older T-Head CPUs
riscv: Fix build error if !CONFIG_ARCH_ENABLE_HUGEPAGE_MIGRATION
riscv: mm: fix NOCACHE_THEAD does not set bit[61] correctly
riscv: add CALLER_ADDRx support
RISC-V: Drop invalid test from CONFIG_AS_HAS_OPTION_ARCH
kbuild: Add -Wa,--fatal-warnings to as-instr invocation
riscv: tlb: fix __p*d_free_tlb()
|
|
Introduce --kallsyms argument for scanning binary files for known symbol
addresses. This would have found the exposure in /sys/kernel/notes:
$ scripts/leaking_addresses.pl --kallsyms=<(sudo cat /proc/kallsyms)
/sys/kernel/notes: hypercall_page @ 156
/sys/kernel/notes: xen_hypercall_set_trap_table @ 156
/sys/kernel/notes: startup_xen @ 132
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Tycho Andersen <tandersen@netflix.com>
Link: https://lore.kernel.org/r/20240222220053.1475824-4-keescook@chromium.org
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
These are false positives from the input subsystem:
/proc/bus/input/devices: B: KEY=402000000 3803078f800d001 feffffdfffefffff fffffffffffffffe
/sys/devices/platform/i8042/serio0/input/input1/uevent: KEY=402000000 3803078f800d001 feffffdfffefffff fffffffffffffffe
/sys/devices/platform/i8042/serio0/input/input1/capabilities/key: 402000000 3803078f800d001 feffffdf
Pass in the filename for more context and expand the "ignored pattern"
matcher to notice these.
Reviewed-by: Tycho Andersen <tandersen@netflix.com>
Link: https://lore.kernel.org/r/20240222220053.1475824-3-keescook@chromium.org
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
Instead of using a statically named path in /tmp, use File::Temp to create
(and remove) the temporary file used for parsing /proc/config.gz.
Reviewed-by: Tycho Andersen <tandersen@netflix.com>
Link: https://lore.kernel.org/r/20240222220053.1475824-2-keescook@chromium.org
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
include/linux/overflow.h includes helper macros intended for calculating
sizes of allocations. These macros prevent accidental overflow by
saturating at SIZE_MAX.
In general when calculating such sizes use of the macros is preferred. Add
a semantic patch which can detect code patterns which can be replaced by
struct_size.
Note that I set the confidence to medium because this patch doesn't make an
attempt to ensure that the relevant array is actually a flexible array. The
struct_size macro does specifically require a flexible array. In many cases
the detected code could be refactored to a flexible array, but this is not
always possible (such as if there are multiple over-allocations).
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20230227202428.3657443-1-jacob.e.keller@intel.com
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
Add rules for finding places where str_plural() can be used. This
currently finds:
54 files changed, 62 insertions(+), 61 deletions(-)
Co-developed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://lore.kernel.org/all/fc1b25a8-6381-47c2-831c-ab6b8201a82b@intel.com/
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
This is the next upgrade to the Rust toolchain, from 1.75.0 to 1.76.0
(i.e. the latest) [1].
See the upgrade policy [2] and the comments on the first upgrade in
commit 3ed03f4da06e ("rust: upgrade to Rust 1.68.2").
# Unstable features
No unstable features that we use were stabilized in Rust 1.76.0.
The only unstable features allowed to be used outside the `kernel` crate
are still `new_uninit,offset_of`, though other code to be upstreamed
may increase the list.
Please see [3] for details.
# Required changes
`rustc` (and others) now warns when it cannot connect to the Make
jobserver, thus mark those invocations as recursive as needed. Please
see the previous commit for details.
# Other changes
Rust 1.76.0 does not emit the `.debug_pub{names,types}` sections anymore
for DWARFv4 [4][5]. For instance, in the uncompressed debug info case,
this debug information took:
samples/rust/rust_minimal.o ~64 KiB (~18% of total object size)
rust/kernel.o ~92 KiB (~15%)
rust/core.o ~114 KiB ( ~5%)
In the compressed debug info (zlib) case:
samples/rust/rust_minimal.o ~11 KiB (~6%)
rust/kernel.o ~17 KiB (~5%)
rust/core.o ~21 KiB (~1.5%)
In addition, the `rustc_codegen_gcc` backend now does not emit the
`.eh_frame` section when compiling under `-Cpanic=abort` [6], thus
removing the need for the patch in the CI to compile the kernel [7].
Moreover, it also now emits the `.comment` section too [6].
# `alloc` upgrade and reviewing
The vast majority of changes are due to our `alloc` fork being upgraded
at once.
There are two kinds of changes to be aware of: the ones coming from
upstream, which we should follow as closely as possible, and the updates
needed in our added fallible APIs to keep them matching the newer
infallible APIs coming from upstream.
Instead of taking a look at the diff of this patch, an alternative
approach is reviewing a diff of the changes between upstream `alloc` and
the kernel's. This allows to easily inspect the kernel additions only,
especially to check if the fallible methods we already have still match
the infallible ones in the new version coming from upstream.
Another approach is reviewing the changes introduced in the additions in
the kernel fork between the two versions. This is useful to spot
potentially unintended changes to our additions.
To apply these approaches, one may follow steps similar to the following
to generate a pair of patches that show the differences between upstream
Rust and the kernel (for the subset of `alloc` we use) before and after
applying this patch:
# Get the difference with respect to the old version.
git -C rust checkout $(linux/scripts/min-tool-version.sh rustc)
git -C linux ls-tree -r --name-only HEAD -- rust/alloc |
cut -d/ -f3- |
grep -Fv README.md |
xargs -IPATH cp rust/library/alloc/src/PATH linux/rust/alloc/PATH
git -C linux diff --patch-with-stat --summary -R > old.patch
git -C linux restore rust/alloc
# Apply this patch.
git -C linux am rust-upgrade.patch
# Get the difference with respect to the new version.
git -C rust checkout $(linux/scripts/min-tool-version.sh rustc)
git -C linux ls-tree -r --name-only HEAD -- rust/alloc |
cut -d/ -f3- |
grep -Fv README.md |
xargs -IPATH cp rust/library/alloc/src/PATH linux/rust/alloc/PATH
git -C linux diff --patch-with-stat --summary -R > new.patch
git -C linux restore rust/alloc
Now one may check the `new.patch` to take a look at the additions (first
approach) or at the difference between those two patches (second
approach). For the latter, a side-by-side tool is recommended.
Link: https://github.com/rust-lang/rust/blob/stable/RELEASES.md#version-1760-2024-02-08 [1]
Link: https://rust-for-linux.com/rust-version-policy [2]
Link: https://github.com/Rust-for-Linux/linux/issues/2 [3]
Link: https://github.com/rust-lang/compiler-team/issues/688 [4]
Link: https://github.com/rust-lang/rust/pull/117962 [5]
Link: https://github.com/rust-lang/rust/pull/118068 [6]
Link: https://github.com/Rust-for-Linux/ci-rustc_codegen_gcc [7]
Tested-by: Boqun Feng <boqun.feng@gmail.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20240217002638.57373-2-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
`rustc` (like Cargo) may take advantage of the jobserver at any time
(e.g. for backend parallelism, or eventually frontend too). In the kernel,
we call `rustc` with `-Ccodegen-units=1` (and `-Zthreads` is 1 so far),
so we do not expect parallelism. However, in the upcoming Rust 1.76.0, a
warning is emitted by `rustc` [1] when it cannot connect to the jobserver
it was passed (in many cases, but not all: compiling and `--print sysroot`
do, but `--version` does not). And given GNU Make always passes
the jobserver in the environment variable (even when a line is deemed
non-recursive), `rustc` will end up complaining about it (in particular
in Make 4.3 where there is only the simple pipe jobserver style).
One solution is to remove the jobserver from `MAKEFLAGS`. However, we
can mark the lines with calls to `rustc` (and Cargo) as recursive, which
looks simpler. This is being documented as a recommendation in `rustc`
[2] and allows us to be ready for the time we may use parallelism inside
`rustc` (potentially now, if a user passes `-Zthreads`). Thus do so.
Similarly, do the same for `rustdoc` and `cargo` calls.
Finally, there is one case that the solution does not cover, which is the
`$(shell ...)` call we have. Thus, for that one, set an empty `MAKEFLAGS`
environment variable.
Link: https://github.com/rust-lang/rust/issues/120515 [1]
Acked-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://github.com/rust-lang/rust/pull/121564 [2]
Link: https://lore.kernel.org/r/20240217002638.57373-1-ojeda@kernel.org
[ Reworded to add link to PR documenting the recommendation. ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Now that all the interrupt warnings have been fixed, enable
'interrupt_provider' check by default. This will also enable
'interrupt_map' check.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20240213-arm-dt-cleanups-v1-6-f2dee1292525@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from bpf and netfilter.
Current release - regressions:
- af_unix: fix another unix GC hangup
Previous releases - regressions:
- core: fix a possible AF_UNIX deadlock
- bpf: fix NULL pointer dereference in sk_psock_verdict_data_ready()
- netfilter: nft_flow_offload: release dst in case direct xmit path
is used
- bridge: switchdev: ensure MDB events are delivered exactly once
- l2tp: pass correct message length to ip6_append_data
- dccp/tcp: unhash sk from ehash for tb2 alloc failure after
check_estalblished()
- tls: fixes for record type handling with PEEK
- devlink: fix possible use-after-free and memory leaks in
devlink_init()
Previous releases - always broken:
- bpf: fix an oops when attempting to read the vsyscall page through
bpf_probe_read_kernel
- sched: act_mirred: use the backlog for mirred ingress
- netfilter: nft_flow_offload: fix dst refcount underflow
- ipv6: sr: fix possible use-after-free and null-ptr-deref
- mptcp: fix several data races
- phonet: take correct lock to peek at the RX queue
Misc:
- handful of fixes and reliability improvements for selftests"
* tag 'net-6.8.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (72 commits)
l2tp: pass correct message length to ip6_append_data
net: phy: realtek: Fix rtl8211f_config_init() for RTL8211F(D)(I)-VD-CG PHY
selftests: ioam: refactoring to align with the fix
Fix write to cloned skb in ipv6_hop_ioam()
phonet/pep: fix racy skb_queue_empty() use
phonet: take correct lock to peek at the RX queue
net: sparx5: Add spinlock for frame transmission from CPU
net/sched: flower: Add lock protection when remove filter handle
devlink: fix port dump cmd type
net: stmmac: Fix EST offset for dwmac 5.10
tools: ynl: don't leak mcast_groups on init error
tools: ynl: make sure we always pass yarg to mnl_cb_run
net: mctp: put sock on tag allocation failure
netfilter: nf_tables: use kzalloc for hook allocation
netfilter: nf_tables: register hooks last when adding new chain/flowtable
netfilter: nft_flow_offload: release dst in case direct xmit path is used
netfilter: nft_flow_offload: reset dst in route object after setting up flow
netfilter: nf_tables: set dormant flag on hook register failure
selftests: tls: add test for peeking past a record of a different type
selftests: tls: add test for merging of same-type control messages
...
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:
====================
pull-request: bpf 2024-02-22
The following pull-request contains BPF updates for your *net* tree.
We've added 11 non-merge commits during the last 24 day(s) which contain
a total of 15 files changed, 217 insertions(+), 17 deletions(-).
The main changes are:
1) Fix a syzkaller-triggered oops when attempting to read the vsyscall
page through bpf_probe_read_kernel and friends, from Hou Tao.
2) Fix a kernel panic due to uninitialized iter position pointer in
bpf_iter_task, from Yafang Shao.
3) Fix a race between bpf_timer_cancel_and_free and bpf_timer_cancel,
from Martin KaFai Lau.
4) Fix a xsk warning in skb_add_rx_frag() (under CONFIG_DEBUG_NET)
due to incorrect truesize accounting, from Sebastian Andrzej Siewior.
5) Fix a NULL pointer dereference in sk_psock_verdict_data_ready,
from Shigeru Yoshida.
6) Fix a resolve_btfids warning when bpf_cpumask symbol cannot be
resolved, from Hari Bathini.
bpf-for-netdev
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf, sockmap: Fix NULL pointer dereference in sk_psock_verdict_data_ready()
selftests/bpf: Add negtive test cases for task iter
bpf: Fix an issue due to uninitialized bpf_iter_task
selftests/bpf: Test racing between bpf_timer_cancel_and_free and bpf_timer_cancel
bpf: Fix racing between bpf_timer_cancel_and_free and bpf_timer_cancel
selftest/bpf: Test the read of vsyscall page under x86-64
x86/mm: Disallow vsyscall page read for copy_from_kernel_nofault()
x86/mm: Move is_vsyscall_vaddr() into asm/vsyscall.h
bpf, scripts: Correct GPL license name
xsk: Add truesize to skb_add_rx_frag().
bpf: Fix warning for bpf_cpumask in verifier
====================
Link: https://lore.kernel.org/r/20240221231826.1404-1-daniel@iogearbox.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
In addition to #ifdef, #define and #endif, also handle
any #if since we may be using e.g. #if IS_ENABLED(...).
I didn't find any instances of this in the kernel now,
there are enums with such ifs inside, but I didn't find
any with kernel-doc as well. However, it came up as we
were adding such a construct in our driver and warnings
from kernel-doc were the result.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20240214142937.80ee86a3beae.Ibcc5bd97a20cd10a792663e4b254cd46c7e8b520@changeid
|
|
Untangle some of the $is_macro logic and the nested conditionals.
This makes it easier to see where and how the signature is actually
printed.
No functional change.
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20240215134828.1277109-5-vegard.nossum@oracle.com
|
|
Format the entire function signature and place it in a separate variable;
this both makes it easier to understand what these lines of code are doing
and will allow us to simplify the code further in the following patch.
No functional change.
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20240215134828.1277109-4-vegard.nossum@oracle.com
|
|
Get rid of the $start variable, since it's really not necessary.
No functional change.
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20240215134828.1277109-3-vegard.nossum@oracle.com
|
|
Set 'softtabstop' to 4 spaces, which will hopefully help keep the
indentation in this file consistent going forwards.
This mirrors the modeline in scripts such as recordmcount.pl, ktest.pl,
and others.
Emacs seems to use 4 spaces to indent by default, so it doesn't require
anything special here.
No functional change.
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20240215134828.1277109-2-vegard.nossum@oracle.com
|
|
In order to mitigate unexpected signed wrap-around[1], bring back the
signed integer overflow sanitizer. It was removed in commit 6aaa31aeb9cf
("ubsan: remove overflow checks") because it was effectively a no-op
when combined with -fno-strict-overflow (which correctly changes signed
overflow from being "undefined" to being explicitly "wrap around").
Compilers are adjusting their sanitizers to trap wrap-around and to
detecting common code patterns that should not be instrumented
(e.g. "var + offset < var"). Prepare for this and explicitly rename
the option from "OVERFLOW" to "WRAP" to more accurately describe the
behavior.
To annotate intentional wrap-around arithmetic, the helpers
wrapping_add/sub/mul_wrap() can be used for individual statements. At
the function level, the __signed_wrap attribute can be used to mark an
entire function as expecting its signed arithmetic to wrap around. For a
single object file the Makefile can use "UBSAN_SIGNED_WRAP_target.o := n"
to mark it as wrapping, and for an entire directory, "UBSAN_SIGNED_WRAP :=
n" can be used.
Additionally keep these disabled under CONFIG_COMPILE_TEST for now.
Link: https://github.com/KSPP/linux/issues/26 [1]
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Hao Luo <haoluo@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Reviewed-by: Justin Stitt <justinstitt@google.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
Conditional atomic operations (e.g. cmpxchg()) only provide ordering
when the condition holds; when the condition does not hold, the location
is not modified and relaxed ordering is provided. Where ordering is
needed for failed conditional atomics, it is necessary to use
smp_mb__before_atomic() and/or smp_mb__after_atomic().
This is explained tersely in memory-barriers.txt, and is implied but not
explicitly stated in the kerneldoc comments for the conditional
operations. The lack of an explicit statement has lead to some off-list
queries about the ordering semantics of failing conditional operations,
so evidently this is confusing.
Update the kerneldoc comments to explicitly describe the lack of ordering
for failed conditional atomic operations.
For most conditional atomic operations, this is written as:
| If (${condition}), atomically updates @v to (${new}) with ${desc_order} ordering.
| Otherwise, @v is not modified and relaxed ordering is provided.
For the try_cmpxchg() operations, this is written as:
| If (${condition}), atomically updates @v to @new with ${desc_order} ordering.
| Otherwise, @v is not modified, @old is updated to the current value of @v,
| and relaxed ordering is provided.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Nhat Pham <nphamcs@gmail.com>
Link: https://lore.kernel.org/r/20240209124010.2096198-1-mark.rutland@arm.com
|
|
Generate aliases for coreboot modules to allow automatic module probing.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Acked-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://lore.kernel.org/r/20240212-coreboot-mod-defconfig-v4-2-d14172676f6d@collabora.com
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
|
|
Certain assembler instruction tests may only induce warnings from the
assembler on an unsupported instruction or option, which causes as-instr
to succeed when it was expected to fail. Some tests workaround this
limitation by additionally testing that invalid input fails as expected.
However, this is fragile if the assembler is changed to accept the
invalid input, as it will cause the instruction/option to be unavailable
like it was unsupported even when it is.
Use '-Wa,--fatal-warnings' in the as-instr macro to turn these warnings
into hard errors, which avoids this fragility and makes tests more
robust and well formed.
Cc: stable@vger.kernel.org
Suggested-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Eric Biggers <ebiggers@google.com>
Tested-by: Andy Chiu <andybnac@gmail.com>
Reviewed-by: Andy Chiu <andybnac@gmail.com>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://lore.kernel.org/r/20240125-fix-riscv-option-arch-llvm-18-v1-1-390ac9cc3cd0@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
lld is now able to build ARMv4 and ARMv4T kernels, which means it can
generate thunks for those (__ARMv4PILongThunk_*, __ARMv4PILongBXThunk_*)
that can interfere with kallsyms table generation since they do not get
ignore like the corresponding ARMv5+ ones are:
Inconsistent kallsyms data
Try "make KALLSYMS_EXTRA_PASS=1" as a workaround
Replace the hardcoded list of thunk symbols with a more general regex that
covers this one along with future symbols that follow the same pattern.
Fixes: 5eb6e280432d ("ARM: 9289/1: Allow pre-ARMv5 builds with ld.lld 16.0.0 and newer")
Fixes: efe6e3068067 ("kallsyms: fix nonconverging kallsyms table with lld")
Suggested-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
This file is using an ungodly mixture of 4 spaces, 2-wide tabs, 4-wide
tabs, _and_ 8-wide tabs, making it really hard to find good editor
settings for working with this file.
Bite the bullet and reindent it by hand. I tried using both perltidy
and vim, but neither of them were up to the task without changing too
much or getting confused about what they were supposed to be doing.
I did change a few instances of
}
else
into
} else
(and same for elsif); the file is again written using both styles, and
I left functions which already seemed self-consistent alone.
You can verify that this commit only changes whitespace using e.g.:
git diff --ignore-all-space --word-diff
or to see (only) the instances where newlines were added/removed:
git diff --ignore-all-space
You can also see the delta from what perltidy would have wanted to
do to this file (when asked to only indent it), which isn't that much
in the end:
perltidy -io -fnl scripts/kernel-doc
git diff --no-index scripts/kernel-doc{,.tdy}
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20240208161705.888385-1-vegard.nossum@oracle.com
|
|
The Python module pyyaml is required to build the docs, but it is only
listed in Documentation/sphinx/requirements.txt and is therefore missing
when Sphinx is installed as a package and not via pip/pypi.
Add pyyaml as an optional package for multiple distros to fix building the
docs if you prefer to install Sphinx as a package.
Signed-off-by: Thorsten Blum <thorsten.blum@toblux.com>
Reviewed-by: Vegard Nossum <vegard.nossum@oracle.com>
Tested-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20240208205550.984-1-thorsten.blum@toblux.com
|
|
get_line() does not trim the leading spaces, but the
parse_source_files() expects to get lines with source files paths where
the first space occurs after the file path.
Fixes: 70f30cfe5b89 ("modpost: use read_text_file() and get_line() for reading text files")
Signed-off-by: Radek Krejci <radek.krejci@oracle.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
With python 3.12, '\#' results in this warning
SyntaxWarning: invalid escape sequence '\#'
Signed-off-by: Andrew Ballance <andrewjballance@gmail.com>
Reviewed-by: Justin Stitt <justinstitt@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Commit 90ceddcb4950 ("bpf: Support llvm-objcopy for vmlinux BTF")
changed the ELF type of .btf.vmlinux.bin.o to ET_REL via dd, which works
fine for little endian platforms:
00000000 7f 45 4c 46 02 01 01 00 00 00 00 00 00 00 00 00 |.ELF............|
-00000010 03 00 b7 00 01 00 00 00 00 00 00 80 00 80 ff ff |................|
+00000010 01 00 b7 00 01 00 00 00 00 00 00 80 00 80 ff ff |................|
However, for big endian platforms, it changes the wrong byte, resulting
in an invalid ELF file type, which ld.lld rejects:
00000000 7f 45 4c 46 02 02 01 00 00 00 00 00 00 00 00 00 |.ELF............|
-00000010 00 03 00 16 00 00 00 01 00 00 00 00 00 10 00 00 |................|
+00000010 01 03 00 16 00 00 00 01 00 00 00 00 00 10 00 00 |................|
Type: <unknown>: 103
ld.lld: error: .btf.vmlinux.bin.o: unknown file type
Fix this by updating the entire 16-bit e_type field rather than just a
single byte, so that everything works correctly for all platforms and
linkers.
00000000 7f 45 4c 46 02 02 01 00 00 00 00 00 00 00 00 00 |.ELF............|
-00000010 00 03 00 16 00 00 00 01 00 00 00 00 00 10 00 00 |................|
+00000010 00 01 00 16 00 00 00 01 00 00 00 00 00 10 00 00 |................|
Type: REL (Relocatable file)
While in the area, update the comment to mention that binutils 2.35+
matches LLD's behavior of rejecting an ET_EXEC input, which occurred
after the comment was added.
Cc: stable@vger.kernel.org
Fixes: 90ceddcb4950 ("bpf: Support llvm-objcopy for vmlinux BTF")
Link: https://github.com/llvm/llvm-project/pull/75643
Suggested-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Fangrui Song <maskray@google.com>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Justin Stitt <justinstitt@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
The bpf_doc script refers to the GPL as the "GNU Privacy License".
I strongly suspect that the author wanted to refer to the GNU General
Public License, under which the Linux kernel is released, as, to the
best of my knowledge, there is no license named "GNU Privacy License".
This patch corrects the license name in the script accordingly.
Fixes: 56a092c89505 ("bpf: add script and prepare bpf.h for new helpers documentation")
Signed-off-by: Gianmarco Lusvardi <glusvardi@posteo.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20240213230544.930018-3-glusvardi@posteo.net
|
|
dependent patches
Merge in pending alternatives patching infrastructure changes, before
applying more patches.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
For simplicity in splitting out UBSan options into separate rules,
remove CONFIG_UBSAN_SANITIZE_ALL, effectively defaulting to "y", which
is how it is generally used anyway. (There are no ":= y" cases beyond
where a specific file is enabled when a top-level ":= n" is in effect.)
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Marco Elver <elver@google.com>
Cc: linux-doc@vger.kernel.org
Cc: linux-kbuild@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
Clang changed the way it enables UBSan trapping mode. Update the Makefile
logic to discover it.
Suggested-by: Fangrui Song <maskray@google.com>
Link: https://lore.kernel.org/lkml/CAFP8O3JivZh+AAV7N90Nk7U2BHRNST6MRP0zHtfQ-Vj0m4+pDA@mail.gmail.com/
Reviewed-by: Fangrui Song <maskray@google.com>
Reviewed-by: Justin Stitt <justinstitt@google.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Nicolas Schier <nicolas@fjasle.eu>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Bill Wendling <morbo@google.com>
Cc: linux-kbuild@vger.kernel.org
Cc: llvm@lists.linux.dev
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
In a rather unusual arrangement in include/media/v4l2-vp9.h struct
v4l2_vp9_frame_symbol_counts has fields that are arrays of pointers, not a
pointer to an array, which is what's usually done.
Add support for such arrays of pointers to kernel-doc.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20240131084934.191226-1-sakari.ailus@linux.intel.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Fix UML build with clang-18 and newer
- Avoid using the alias attribute in host programs
- Replace tabs with spaces when followed by conditionals for future GNU
Make versions
- Fix rpm-pkg for the systemd-provided kernel-install tool
- Fix the undefined behavior in Kconfig for a 'int' symbol used in a
conditional
* tag 'kbuild-fixes-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kconfig: initialize sym->curr.tri to 'no' for all symbol types again
kbuild: rpm-pkg: simplify installkernel %post
kbuild: Replace tabs with spaces when followed by conditionals
modpost: avoid using the alias attribute
kbuild: fix W= flags in the help message
modpost: Add '.ltext' and '.ltext.*' to TEXT_SECTIONS
um: Fix adding '-no-pie' for clang
kbuild: defconf: use SRCARCH to find merged configs
|
|
Geert Uytterhoeven reported that commit 4e244c10eab3 ("kconfig: remove
unneeded symbol_empty variable") changed the default value of
CONFIG_LOG_CPU_MAX_BUF_SHIFT from 12 to 0.
As it turned out, this is an undefined behavior because sym_calc_value()
stopped setting the sym->curr.tri field for 'int', 'hex', and 'string'
symbols.
This commit restores the original behavior, where 'int', 'hex', 'string'
symbols are interpreted as false if used in boolean contexts.
CONFIG_LOG_CPU_MAX_BUF_SHIFT will default to 12 again, irrespective
of CONFIG_BASE_SMALL. Presumably, this is not the intended behavior,
as already reported [1], but this is another issue that should be
addressed by a separate patch.
[1]: https://lore.kernel.org/all/f6856be8-54b7-0fa0-1d17-39632bf29ada@oracle.com/
Fixes: 4e244c10eab3 ("kconfig: remove unneeded symbol_empty variable")
Reported-by: Geert Uytterhoeven <geert+renesas@glider.be>
Closes: https://lore.kernel.org/all/CAMuHMdWm6u1wX7efZQf=2XUAHascps76YQac6rdnQGhc8nop_Q@mail.gmail.com/
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
The new installkernel application that is now included in systemd-udev
package allows installation although destination files are already present
in the boot directory of the kernel package, but is failing with the
implemented workaround for the old installkernel application from grubby
package.
For the new installkernel application, as Davide says:
<<The %post currently does a shuffling dance before calling installkernel.
This isn't actually necessary afaict, and the current implementation
ends up triggering downstream issues such as
https://github.com/systemd/systemd/issues/29568
This commit simplifies the logic to remove the shuffling. For reference,
the original logic was added in commit 3c9c7a14b627("rpm-pkg: add %post
section to create initramfs and grub hooks").>>
But we need to keep the old behavior as well, because the old installkernel
application from grubby package, does not allow this simplification and
we need to be backward compatible to avoid issues with the different
packages.
Mimic Fedora shipping process and store vmlinuz, config amd System.map
in the module directory instead of the boot directory. In this way, we will
avoid the commented problem for all the cases, because the new destination
files are not going to exist in the boot directory of the kernel package.
Replace installkernel tool with kernel-install tool, because the latter is
more complete.
Besides, after installkernel tool execution, check to complete if the
correct package files vmlinuz, System.map and config files are present
in /boot directory, and if necessary, copy manually for install operation.
In this way, take into account if files were not previously copied from
/usr/lib/kernel/install.d/* scripts and if the suitable files for the
requested package are present (it could be others if the rpm files were
replace with a new pacakge with the same release and a different build).
Tested with Fedora 38, Fedora 39, RHEL 9, Oracle Linux 9.3,
openSUSE Tumbleweed and openMandrive ROME, using dnf/zypper and rpm tools.
cc: stable@vger.kernel.org
Co-Developed-by: Davide Cavalca <dcavalca@meta.com>
Signed-off-by: Jose Ignacio Tornos Martinez <jtornosm@redhat.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Aiden Leong reported modpost fails to build on macOS since commit
16a473f60edc ("modpost: inform compilers that fatal() never returns"):
scripts/mod/modpost.c:93:21: error: aliases are not supported on darwin
Nathan's research indicates that Darwin seems to support weak aliases
at least [1]. Although the situation might be improved in future Clang
versions, we can achieve a similar outcome without relying on it.
This commit makes fatal() a macro of error() + exit(1) in modpost.h, as
compilers recognize that exit() never returns.
[1]: https://github.com/llvm/llvm-project/issues/71001
Fixes: 16a473f60edc ("modpost: inform compilers that fatal() never returns")
Reported-by: Aiden Leong <aiden.leong@aibsd.com>
Closes: https://lore.kernel.org/all/d9ac2960-6644-4a87-b5e4-4bfb6e0364a8@aibsd.com/
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|