| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
I2C devices do not have any form of ID as PCI or USB devices have.
No driver uses "MODULE_DEVICE_TABLE(i2c, ...)" because it doesn't
make sense. So we can get rid of struct i2c_device_id and the
associated support code.
Signed-off-by: Jean Delvare <[email protected]>
Cc: Greg KH <[email protected]>
|
|
Cause modpost to fail if any device id lists are incorrectly terminated,
after reporting the offender.
Improved reporting by akpm
Signed-off-by: Kees Cook <[email protected]>
Cc: Greg KH <[email protected]>
Cc: Alexey Dobriyan <[email protected]>
Cc: Jeff Garzik <[email protected]>
Cc: Ben Collins <[email protected]>
Cc: Michael Wu <[email protected]>
Cc: Rusty Russell <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Sam Ravnborg <[email protected]>
|
|
Fix modpost segfault.
Before:
-------
ynezz@ntbk:~/linux-2.6.git$ scripts/mod/modpost vmlinux ath_pci.o
Segmentation fault
After:
------
ynezz@ntbk:~/linux-2.6.git$ scripts/mod/modpost vmlinux ath_pci.o
FATAL: section header offset=815726848 in file 'ath_pci.o' is bigger then filesize=153968
Sam: This seems to warn for a binutils issue. Anyway modpost should not
segfault.
Signed-off-by: Petr Stetiar <[email protected]>
Signed-off-by: Sam Ravnborg <[email protected]>
|
|
The Elfnn_Section is not available on all platforms,
noteworthy are cygwin.
Use the safe replacement _Half.
Signed-off-by: Sam Ravnborg <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (867 commits)
[SKY2]: status polling loop (post merge)
[NET]: Fix NAPI completion handling in some drivers.
[TCP]: Limit processing lost_retrans loop to work-to-do cases
[TCP]: Fix lost_retrans loop vs fastpath problems
[TCP]: No need to re-count fackets_out/sacked_out at RTO
[TCP]: Extract tcp_match_queue_to_sack from sacktag code
[TCP]: Kill almost unused variable pcount from sacktag
[TCP]: Fix mark_head_lost to ignore R-bit when trying to mark L
[TCP]: Add bytes_acked (ABC) clearing to FRTO too
[IPv6]: Update setsockopt(IPV6_MULTICAST_IF) to support RFC 3493, try2
[NETFILTER]: x_tables: add missing ip6t_modulename aliases
[NETFILTER]: nf_conntrack_tcp: fix connection reopening
[QETH]: fix qeth_main.c
[NETLINK]: fib_frontend build fixes
[IPv6]: Export userland ND options through netlink (RDNSS support)
[9P]: build fix with !CONFIG_SYSCTL
[NET]: Fix dev_put() and dev_hold() comments
[NET]: make netlink user -> kernel interface synchronious
[NET]: unify netlink kernel socket recognition
[NET]: cleanup 3rd argument in netlink_sendskb
...
Fix up conflicts manually in Documentation/feature-removal-schedule.txt
and my new least favourite crap, the "mod_devicetable" support in the
files include/linux/mod_devicetable.h and scripts/mod/file2alias.c.
(The latter files seem to be explicitly _designed_ to get conflicts when
different subsystems work with them - that have an absolutely horrid
lack of subsystem separation!)
Signed-off-by: Linus Torvalds <[email protected]>
|
|
With the net namespaces many code leaved the __init section,
thus making the kernel occupy more memory than it did before.
Since we have a config option that prohibits the namespace
creation, the functions that initialize/finalize some netns
stuff are simply not needed and can be freed after the boot.
Currently, this is almost not noticeable, since few calls
are no longer in __init, but when the namespaces will be
merged it will be possible to free more code. I propose to
use the __net_init, __net_exit and __net_initdata "attributes"
for functions/variables that are not used if the CONFIG_NET_NS
is not set to save more space in memory.
The exiting functions cannot just reside in the __exit section,
as noticed by David, since the init section will have
references on it and the compilation will fail due to modpost
checks. These references can exist, since the init namespace
never dies and the exit callbacks are never called. So I
introduce the __exit_refok attribute just like it is already
done with the __init_refok.
Signed-off-by: Pavel Emelyanov <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
SSB is an SoC bus used in a number of embedded devices. The most
well-known of these devices is probably the Linksys WRT54G, but there
are others as well. The bus is also used internally on the BCM43xx
and BCM44xx devices from Broadcom.
This patch also includes support for SSB ID tables in modules, so
that SSB drivers can be loaded automatically.
Signed-off-by: Michael Buesch <[email protected]>
Signed-off-by: John W. Linville <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Signed-off-by: Pierre Ossman <[email protected]>
|
|
This is needed on MIPS where the same mechanism as get_user() is used to
intercept bus error exceptions for some hardware probes. Without this
patch modpost will throw spurious warnings:
LD vmlinux
SYSMAP System.map
SYSMAP .tmp_System.map
MODPOST vmlinux
WARNING: arch/mips/sgi-ip22/built-in.o(__dbe_table+0x0): Section mismatch: reference to .init.text:
Signed-off-by: Ralf Baechle <[email protected]>
Cc: Sam Ravnborg <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
The Xtensa architecture places literal pools in sections separate
from the instructions. The corresponsing text sections, therefore,
reference the .literal section, and we have to suppress those
warnings.
The naming convention defines the name for a literal
section as .SECTION.literal, unless .SECTION is .text. In that case
the name is only .literal. Using strncmp() instead of strcmp()
to compare the from-section with .SECTION.init.refok in pattern 0
should not cause any regressions for other architectures.
We also need to suppress warnings for two informational
sections (.xt.lit and .xt.prop) used by the Xtensa architecture.
Signed-off-by: Chris Zankel <[email protected]>
Signed-off-by: Sam Ravnborg <[email protected]>
|
|
In the whitelist function of modpost now use the same
check to identify init_section as in other places of modpost.
This has the effect that we now recognize sections named
.init.text.19 as init sections and we no longer warn
when we see these.
At the same time make surrounding code readable by dropping
use of temporary flags.
Signed-off-by: Sam Ravnborg <[email protected]>
|
|
This is a preparational patch that just move
two functions and add one (for now unused) function.
Signed-off-by: Sam Ravnborg <[email protected]>
|
|
We already check and warn about section mismatches from vmlinux
(build as vmlinux.o) during first pass so skip the checks
during the 2nd pass where we process modules.
Signed-off-by: Sam Ravnborg <[email protected]>
|
|
Modify modpost (file2alias.c) to add acpi*:XYZ0001: alias in modules.alias
like:
grep acpi /lib/modules/2.6.22-rc4-default/modules.alias
alias acpi*:SNY5001:* sony_laptop
alias acpi*:SNY6001:* sony_laptop
for e.g. the sony_laptop module.
This module matches against all ACPI devices with a HID or CID of SNY5001
or SNY6001
Export an uevent and modalias sysfs file containing the string:
[MODALIAS=]acpi:PNP0C0C:
additional CIDs are concatenated at the end.
Signed-off-by: Thomas Renninger <[email protected]>
Signed-off-by: Kay Sievers <[email protected]>
Signed-off-by: Len Brown <[email protected]>
|
|
Signed-off-by: Al Viro <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
This is needed on MIPS where the same mechanism as get_user() is used to
intercept bus error exceptions for some hardware probes. Without this
patch modpost will throw spurious warnings:
LD vmlinux
SYSMAP System.map
SYSMAP .tmp_System.map
MODPOST vmlinux
WARNING: arch/mips/sgi-ip22/built-in.o(__dbe_table+0x0): Section mismatch: reference to .init.text:
Signed-off-by: Ralf Baechle <[email protected]>
Signed-off-by: Sam Ravnborg <[email protected]>
|
|
gcc puts data into .data.rel or .data.rel.* on some architectures (e.g.
ia64) or under certain conditions, so whatever is legal relative to
.data should also be legal for those other sections. Fixes a few
modpost warnings on ia64.
Signed-off-by: Jan Beulich <[email protected]>
Signed-off-by: Sam Ravnborg <[email protected]>
|
|
Previously we did do the check on the .o files used to link
vmlinux but that failed to find questionable references across
the .o files.
Create a dedicated vmlinux.o file used only for section mismatch checks
that uses the defualt linker script so section does not get renamed.
The vmlinux.o may later be used as part of the the final link of vmlinux
but for now it is used fo section mismatch only.
For a defconfig build this is instant but for an allyesconfig this
add two minutes to a full build (that anyways takes ~2 hours).
Signed-off-by: Sam Ravnborg <[email protected]>
|
|
arm uses a lot of ops structures named *_timer that has legitimite
references to .init.text.
So let's add this variable to the list of variables that may reference
.init.text without causing any warning.
Signed-off-by: Sam Ravnborg <[email protected]>
|
|
Replaced this with a __init_refok marker
in front of fb_find_logo().
I think that the __initdata marker for the logo's are
wrong but I have not justified this so I did not remove it.
Signed-off-by: Sam Ravnborg <[email protected]>
|
|
Replace the hardcoded variable name apic_es7000 in modpost
with a __initdata_refok marker.
Signed-off-by: Sam Ravnborg <[email protected]>
|
|
The .exit.text section may be discarded either at build or at runtime.
So let modpost warn if this situation is detected.
Signed-off-by: Sam Ravnborg <[email protected]>
|
|
Move more checks from whitelist to the section check functions.
Remove the redundent pci_fixup check.
Renumber the patterns.
No functional changes.
Signed-off-by: Sam Ravnborg <[email protected]>
|
|
There were a great deal of overlap between the two functions
that check which sections may reference .init.text and .exit.text.
Factor out common check to a separate function and
sort entries in the original functions.
Signed-off-by: Sam Ravnborg <[email protected]>
|
|
.note* sections are ELF notes, which are typically used by external
tools to examine the kernel image. Since this is removed from any
runtime consideration, it's OK to reference any section from a .note*
section.
Signed-off-by: Jeremy Fitzhardinge <[email protected]>
Cc: "Eric W. Biederman" <[email protected]>
Signed-off-by: Sam Ravnborg <[email protected]>
|
|
The .paravirtprobe section is obsolete, so modpost doesn't need to handle it.
Signed-off-by: Jeremy Fitzhardinge <[email protected]>
Cc: Rusty Russell <[email protected]>
Signed-off-by: Sam Ravnborg <[email protected]>
|
|
used by powerpc
We should do better here by effetively "dereferencing" references to
the .toc (or the .got2) section, but that is much harder.
Signed-off-by: Stephen Rothwell <[email protected]>
Signed-off-by: Sam Ravnborg <[email protected]>
|
|
With this change we can find more symbols hereby improving
the readability of the warnings.
Signed-off-by: Sam Ravnborg <[email protected]>
|
|
On i386 and MIPS, warn_sec_mismatch() sometimes fails to show
usefull symbol name. This is because empty 'refsym' due to 0 r_addend
value. This patch is to adjust r_addend value, consulting with
apply_relocate() routine in kernel code.
Signed-off-by: Atsushi Nemoto <[email protected]>
Signed-off-by: Sam Ravnborg <[email protected]>
|
|
There's a special .cranges section that is almost always generated,
with data being moved to the appropriate section by the linker at a later
stage.
To give a bit of background, sh64 has both a native SHmedia instruction
set (32-bit instructions) and SHcompact (which is compatability with
normal SH -- 16-bit, a massively reduced register set, etc.). code ranges
are emitted when we're using the 32-bit ABI, but not the 64-bit one.
It is a special staging section used solely by binutils where code with
different flags get placed (more specifically differing flags for input
and output sections), before being lazily merged by the linker.
The closest I've been able to find to documentation is:
http://sources.redhat.com/cgi-bin/cvsweb.cgi/src/ld/emultempl/sh64elf.em?rev=1.10&content-type=text/x-cvsweb-markup&cvsroot=src
It's an array of 8-byte Elf32_CRange structure given in
http://sources.redhat.com/cgi-bin/cvsweb.cgi/src/bfd/elf32-sh64.h?rev=1.4&content-type=text/x-cvsweb-markup&cvsroot=src
that describes for which ISA a range is used.
Silence the warnings by allowing references from .init.text to .cranges.
The following warnings are fixed:
WARNING: init/built-in.o(.cranges+0x0): Section mismatch: reference to .init.text:
WARNING: init/built-in.o(.cranges+0xa): Section mismatch: reference to .init.text:
WARNING: init/built-in.o(.cranges+0x14): Section mismatch: reference to .init.text:
WARNING: init/built-in.o(.cranges+0x1e): Section mismatch: reference to .init.text:
WARNING: init/built-in.o(.cranges+0x28): Section mismatch: reference to .init.text:
WARNING: init/built-in.o(.cranges+0x32): Section mismatch: reference to .init.text:
WARNING: kernel/built-in.o(.cranges+0x50): Section mismatch: reference to .init.text:
WARNING: kernel/built-in.o(.cranges+0x5a): Section mismatch: reference to .init.text:
WARNING: kernel/built-in.o(.cranges+0x64): Section mismatch: reference to .init.text:
WARNING: kernel/built-in.o(.cranges+0xfa): Section mismatch: reference to .init.text:
WARNING: kernel/built-in.o(.cranges+0x104): Section mismatch: reference to .init.text:
WARNING: kernel/built-in.o(.cranges+0x10e): Section mismatch: reference to .init.text:
WARNING: kernel/built-in.o(.cranges+0x14a): Section mismatch: reference to .init.text:
WARNING: kernel/built-in.o(.cranges+0x154): Section mismatch: reference to .init.text:
WARNING: kernel/built-in.o(.cranges+0x15e): Section mismatch: reference to .init.text:
WARNING: mm/built-in.o(.cranges+0x6e): Section mismatch: reference to .init.text:
WARNING: mm/built-in.o(.cranges+0x78): Section mismatch: reference to .init.text:
WARNING: mm/built-in.o(.cranges+0x82): Section mismatch: reference to .init.text:
WARNING: mm/built-in.o(.cranges+0xaa): Section mismatch: reference to .init.text:
WARNING: fs/built-in.o(.cranges+0x136): Section mismatch: reference to .init.text:
WARNING: fs/built-in.o(.cranges+0x140): Section mismatch: reference to .init.text:
WARNING: fs/built-in.o(.cranges+0x14a): Section mismatch: reference to .init.text:
WARNING: fs/built-in.o(.cranges+0x168): Section mismatch: reference to .init.text:
WARNING: fs/built-in.o(.cranges+0x1f4): Section mismatch: reference to .init.text:
WARNING: fs/built-in.o(.cranges+0x1fe): Section mismatch: reference to .init.text:
WARNING: net/built-in.o(.cranges+0x302): Section mismatch: reference to .init.text:
WARNING: net/built-in.o(.cranges+0x30c): Section mismatch: reference to .init.text:
WARNING: net/built-in.o(.cranges+0x316): Section mismatch: reference to .init.text:
WARNING: net/built-in.o(.cranges+0x3a2): Section mismatch: reference to .init.text:
WARNING: net/built-in.o(.cranges+0x3ac): Section mismatch: reference to .init.text:
WARNING: net/built-in.o(.cranges+0x4ce): Section mismatch: reference to .init.text:
WARNING: net/built-in.o(.cranges+0x4d8): Section mismatch: reference to .init.text:
Signed-off-by: Paul Mundt <[email protected]>
Cc: Kaz Kojima <[email protected]>
Signed-off-by: Sam Ravnborg <[email protected]>
|
|
This reverts commit f892b7d480eec809a5dfbd6e65742b3f3155e50e, which
totally broke the build on x86 with CONFIG_RELOCATABLE (which, as far as
I can tell, is the only case where it should even matter!) due to a
SIGSEGV in modpost.
Cc: Sam Ravnborg <[email protected]>
Cc: Atsushi Nemoto <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
modpost had two cases hardcoded for mm/
Shift over to __init_refok and kill the
hardcoded function names in modpost.
This has the drawback that the functions
will always be kept no matter configuration.
With previous code the function were placed in
init section if configuration allowed it.
Signed-off-by: Sam Ravnborg <[email protected]>
|
|
Kill a special case in modpost by introducing the
__init_refok marker.
Signed-off-by: Sam Ravnborg <[email protected]>
|
|
warnings
Throughout the kernel there are a few legitimite references
to init or exit sections. Most of these are covered by the
patterns included in modpost but a few nees special attention.
To avoid hardcoding a lot of function names in modpost introduce
a marker so relevant function/data can be marked.
When modpost see a reference to a init/exit function from
a function/data marked no warning will be issued.
Idea from: Andrew Morton <[email protected]>
Signed-off-by: Sam Ravnborg <[email protected]>
Cc: Andrew Morton <[email protected]>
|
|
This patch fixes the following class of "Section mismatch" warnings when
building powerpc platforms.
WARNING: arch/powerpc/kernel/built-in.o - Section mismatch: reference to .init.data:.got2 from prom_entry (offset 0x0)
WARNING: arch/powerpc/platforms/built-in.o - Section mismatch: reference to .init.text:mpc8313_rdb_probe from .machine.desc after 'mach_mpc8313_rdb' (at offset 0x4)
....
Signed-off-by: Li Yang <[email protected]>
Signed-off-by: Sam Ravnborg <[email protected]>
|
|
On i386, ARM and MIPS, warn_sec_mismatch() sometimes fails to show
usefull symbol name. This is because empty 'refsym' due to 0 r_addend
value. This patch is to adjust r_addend value, consulting with
apply_relocate() routine in kernel code.
Without this patch:
MODPOST vmlinux
WARNING: init/built-in.o - Section mismatch: reference to .init.text: from .text between 'rest_init' (at offset 0xf4) and 'try_name'
WARNING: mm/built-in.o - Section mismatch: reference to .init.text: from .text between 'kmem_cache_create' (at offset 0x18a39) and 'cache_reap'
WARNING: mm/built-in.o - Section mismatch: reference to .init.text: from .text between 'kmem_cache_create' (at offset 0x18a6b) and 'cache_reap'
With this patch:
MODPOST vmlinux
WARNING: mm/built-in.o - Section mismatch: reference to .init.text:set_up_list3s from .text between 'kmem_cache_create' (at offset 0x18a39) and 'cache_reap'
WARNING: mm/built-in.o - Section mismatch: reference to .init.text:set_up_list3s from .text between 'kmem_cache_create' (at offset 0x18a6b) and 'cache_reap'
Now modpost can detect "kernel_init" name (and whitelist it) and show
"set_up_list3s" name.
Signed-off-by: Atsushi Nemoto <[email protected]>
Signed-off-by: Sam Ravnborg <[email protected]>
|
|
Change modpost section mismatch warnings to be less confusing;
model them on the binutils linker warnings which we all know how
to interpret.
Also, fix the wrong ordering of arguments for the final case -
fromsec and refsymname were reversed.
Signed-off-by: Russell King <[email protected]>
Acked-by: Acked-by: David S. Miller <[email protected]>
Signed-off-by: Sam Ravnborg <[email protected]>
|
|
POSIX says limits.h defines PATH_MAX so we should include it (which fixes
compiling on some systems like OS X).
Signed-off-by: Mike Frysinger <[email protected]>
Signed-off-by: Sam Ravnborg <[email protected]>
|
|
Since the devices may have multiple (or none) compatible properties,
the uevent generated internally by the kernel may have multiple
"C..." entries. So the MODALIAS stored in the module must have
wilcard before and after the compatible entry.
Also, if the 'compatible' field is not used for matching, there
will be no 'C' and that must handled as well.
The previous code handled all those case incorrectly and it
"mostly" worked ... but not always.
Signed-off-by: Sylvain Munaut <[email protected]>
Signed-off-by: Paul Mackerras <[email protected]>
Signed-off-by: Sam Ravnborg <[email protected]>
|
|
This will later allow an arch to add module specific information via linker
generated tables instead of poking directly in the module object structure.
Signed-off-by: Roman Zippel <[email protected]>
Signed-off-by: Geert Uytterhoeven <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
This patch is add white list into modpost.c for some functions and
ia64's section to fix section mismatchs.
sparse_index_alloc() and zone_wait_table_init() calls bootmem allocator
at boot time, and kmalloc/vmalloc at hotplug time. If config
memory hotplug is on, there are references of bootmem allocater(init text)
from them (normal text). This is cause of section mismatch.
Bootmem is called by many functions and it must be
used only at boot time. I think __init of them should keep for
section mismatch check. So, I would like to register sparse_index_alloc()
and zone_wait_table_init() into white list.
In addition, ia64's .machvec section is function table of some platform
dependent code. It is mixture of .init.text and normal text. These
reference of __init functions are valid too.
Signed-off-by: Yasunori Goto <[email protected]>
Cc: Sam Ravnborg <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
This adds support for the Analog Devices Blackfin processor architecture, and
currently supports the BF533, BF532, BF531, BF537, BF536, BF534, and BF561
(Dual Core) devices, with a variety of development platforms including those
avaliable from Analog Devices (BF533-EZKit, BF533-STAMP, BF537-STAMP,
BF561-EZKIT), and Bluetechnix! Tinyboards.
The Blackfin architecture was jointly developed by Intel and Analog Devices
Inc. (ADI) as the Micro Signal Architecture (MSA) core and introduced it in
December of 2000. Since then ADI has put this core into its Blackfin
processor family of devices. The Blackfin core has the advantages of a clean,
orthogonal,RISC-like microprocessor instruction set. It combines a dual-MAC
(Multiply/Accumulate), state-of-the-art signal processing engine and
single-instruction, multiple-data (SIMD) multimedia capabilities into a single
instruction-set architecture.
The Blackfin architecture, including the instruction set, is described by the
ADSP-BF53x/BF56x Blackfin Processor Programming Reference
http://blackfin.uclinux.org/gf/download/frsrelease/29/2549/Blackfin_PRM.pdf
The Blackfin processor is already supported by major releases of gcc, and
there are binary and source rpms/tarballs for many architectures at:
http://blackfin.uclinux.org/gf/project/toolchain/frs There is complete
documentation, including "getting started" guides available at:
http://docs.blackfin.uclinux.org/ which provides links to the sources and
patches you will need in order to set up a cross-compiling environment for
bfin-linux-uclibc
This patch, as well as the other patches (toolchain, distribution,
uClibc) are actively supported by Analog Devices Inc, at:
http://blackfin.uclinux.org/
We have tested this on LTP, and our test plan (including pass/fails) can
be found at:
http://docs.blackfin.uclinux.org/doku.php?id=testing_the_linux_kernel
[[email protected]: balance parenthesis in blackfin header files]
Signed-off-by: Bryan Wu <[email protected]>
Signed-off-by: Mariusz Kozlowski <[email protected]>
Signed-off-by: Aubrey Li <[email protected]>
Signed-off-by: Jie Zhang <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
* git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild: (38 commits)
kconfig: fix mconf segmentation fault
kbuild: enable use of code from a different dir
kconfig: error out if recursive dependencies are found
kbuild: scripts/basic/fixdep segfault on pathological string-o-death
kconfig: correct minor typo in Kconfig warning message.
kconfig: fix path to modules.txt in Kconfig help
usr/Kconfig: fix typo
kernel-doc: alphabetically-sorted entries in index.html of 'htmldocs'
kbuild: be more explicit on missing .config file
kbuild: clarify the creation of the LOCALVERSION_AUTO string.
kbuild: propagate errors from find in scripts/gen_initramfs_list.sh
kconfig: refer to qt3 if we cannot find qt libraries
kbuild: handle compressed cpio initramfs-es
kbuild: ignore section mismatch warning for references from .paravirtprobe to .init.text
kbuild: remove stale comment in modpost.c
kbuild/mkuboot.sh: allow spaces in CROSS_COMPILE
kbuild: fix make mrproper for Documentation/DocBook/man
kbuild: remove kconfig binaries during make mrproper
kconfig/menuconfig: do not hardcode '.config'
kbuild: override build timestamp & version
...
|
|
to .init.text
Added on request from: Rusty Russell <[email protected]>
Signed-off-by: Sam Ravnborg <[email protected]>
Cc: Rusty Russell <[email protected]>
|
|
Signed-off-by: Sam Ravnborg <[email protected]>
|
|
modpost is now called with .o files that are not modules.
So do not warn if there is no corresponding .mod
file listing .o files (in .tmp_versions/).
Signed-off-by: Sam Ravnborg <[email protected]>
|
|
Some of modpost's warnings are fatal, and some are not. Adopt the
compiler distinction between errors and warnings by calling merror()
for fatal diagnostics and warn() for non-fatal ones.
merror() was used as replacemtn for error() to avoid clash with glibc
Signed-off-by: Matthew Wilcox <[email protected]>
Signed-off-by: Sam Ravnborg <[email protected]>
|
|
Almost all definitions used by file2alias was already
present in mod_devicetable.h.
Added the last definition and killed the input.h usage.
The errornous include was pointed out
by: Jan Engelhardt <[email protected]>
Signed-off-by: Sam Ravnborg <[email protected]>
Cc: Jan Engelhardt <[email protected]>
Cc: Deepak Saxena <[email protected]>
|
|
drivers/video/logo has references from .text to .init.data
but function is only used during early init.
So reference is OK and we do not want to warn about them =>
whitelist the reference.
Signed-off-by: Sam Ravnborg <[email protected]>
|
|
If modpost was called manually with filenames without '/'
then modpost would segfault.
Signed-off-by: Sam Ravnborg <[email protected]>
|