| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Pull workqueue updates from Tejun Heo:
"This cycle, a lot of workqueue changes including some that are
significant and invasive.
- During v6.6 cycle, unbound workqueues were updated so that they are
more topology aware and flexible, which among other things improved
workqueue behavior on modern multi-L3 CPUs. In the process, commit
636b927eba5b ("workqueue: Make unbound workqueues to use per-cpu
pool_workqueues") switched unbound workqueues to use per-CPU
frontend pool_workqueues as a part of increasing front-back mapping
flexibility.
An unwelcome side effect of this change was that this made max
concurrency enforcement per-CPU blowing up the maximum number of
allowed concurrent executions. I incorrectly assumed that this
wouldn't cause practical problems as most unbound workqueue users
are self-regulate max concurrency; however, there definitely are
which don't (e.g. on IO paths) and the drastic increase in the
allowed max concurrency led to noticeable perf regressions in some
use cases.
This is now addressed by separating out max concurrency enforcement
to a separate struct - wq_node_nr_active - which makes @max_active
consistently mean system-wide max concurrency regardless of the
number of CPUs or (finally) NUMA nodes. This is a rather invasive
and, in places, a bit clunky; however, the clunkiness rises from
the the inherent requirement to handle the disagreement between the
execution locality domain and max concurrency enforcement domain on
some modern machines.
See commit 5797b1c18919 ("workqueue: Implement system-wide
nr_active enforcement for unbound workqueues") for more details.
- BH workqueue support is added.
They are similar to per-CPU workqueues but execute work items in
the softirq context. This is expected to replace tasklet. However,
currently, it's missing the ability to disable and enable work
items which is needed to convert many tasklet users. To avoid
crowding this merge window too much, this will be included in the
next merge window. A separate pull request will be sent for the
couple conversion patches that are currently pending.
- Waiman plugged a long-standing hole in workqueue CPU isolation
where ordered workqueues didn't follow wq_unbound_cpumask updates.
Ordered workqueues now follow the same rules as other unbound
workqueues.
- More CPU isolation improvements: Juri fixed another deficit in
workqueue isolation where unbound rescuers don't respect
wq_unbound_cpumask. Leonardo fixed delayed_work timers firing on
isolated CPUs.
- Other misc changes"
* tag 'wq-for-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: (54 commits)
workqueue: Drain BH work items on hot-unplugged CPUs
workqueue: Introduce from_work() helper for cleaner callback declarations
workqueue: Control intensive warning threshold through cmdline
workqueue: Make @flags handling consistent across set_work_data() and friends
workqueue: Remove clear_work_data()
workqueue: Factor out work_grab_pending() from __cancel_work_sync()
workqueue: Clean up enum work_bits and related constants
workqueue: Introduce work_cancel_flags
workqueue: Use variable name irq_flags for saving local irq flags
workqueue: Reorganize flush and cancel[_sync] functions
workqueue: Rename __cancel_work_timer() to __cancel_timer_sync()
workqueue: Use rcu_read_lock_any_held() instead of rcu_read_lock_held()
workqueue: Cosmetic changes
workqueue, irq_work: Build fix for !CONFIG_IRQ_WORK
workqueue: Fix queue_work_on() with BH workqueues
async: Use a dedicated unbound workqueue with raised min_active
workqueue: Implement workqueue_set_min_active()
workqueue: Fix kernel-doc comment of unplug_oldest_pwq()
workqueue: Bind unbound workqueue rescuer to wq_unbound_cpumask
kernel/workqueue: Let rescuers follow unbound wq cpumask changes
...
|
|
This macro is used to obtain a pointer to an entire struct
when given a pointer to a field in that struct.
Signed-off-by: Wedson Almeida Filho <[email protected]>
Reviewed-by: Alice Ryhl <[email protected]>
Tested-by: Alice Ryhl <[email protected]>
Signed-off-by: Matt Gilbride <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Miguel Ojeda <[email protected]>
|
|
Currently, `BStr` is just a type alias of `[u8]`, limiting its
representation to a byte list rather than a character list, which is not
ideal for printing and debugging.
Implement `Display` and `Debug` traits for `BStr` to facilitate easier
printing and debugging.
Also, for this purpose, change `BStr` from a type alias of `[u8]` to a
struct wrapper of `[u8]`.
Co-developed-by: Virgile Andreani <[email protected]>
Signed-off-by: Virgile Andreani <[email protected]>
Signed-off-by: Yutaro Ohno <[email protected]>
Reviewed-by: Alice Ryhl <[email protected]>
Link: https://lore.kernel.org/r/ZcSlGMGP-e9HqybA@ohnotp
[ Formatted code comment. ]
Signed-off-by: Miguel Ojeda <[email protected]>
|
|
Currently `ForeignOwnable::from_foreign()` only works for non-null
pointers for the existing `impl`s (e.g. `Box`, `Arc`). In turn, this
means callers may write code like:
```rust
// `p` is a pointer that may be null.
if p.is_null() {
None
} else {
unsafe { Some(Self::from_foreign(ptr)) }
}
```
Add a `try_from_foreign()` method to the trait with a default
implementation that returns `None` if `ptr` is null, otherwise
`Some(from_foreign(ptr))`, so that it can be used by callers instead.
Link: https://github.com/Rust-for-Linux/linux/issues/1057
Signed-off-by: Obei Sideg <[email protected]>
Reviewed-by: Alice Ryhl <[email protected]>
Reviewed-by: Trevor Gross <[email protected]>
Link: https://lore.kernel.org/r/0100018d53f737f8-80c1fe97-0019-40d7-ab69-b1b192785cd7-000000@email.amazonses.com
[ Fixed intra-doc links, improved `SAFETY` comment and reworded commit. ]
Signed-off-by: Miguel Ojeda <[email protected]>
|
|
The `byte_sub` method was stabilized in Rust 1.75.0. By using that
method, we no longer need the unstable `ptr_metadata` feature for
implementing `Arc::from_raw`.
This brings us one step closer towards not using unstable compiler
features.
Reviewed-by: Benno Lossin <[email protected]>
Reviewed-by: Martin Rodriguez Reboredo <[email protected]>
Reviewed-by: Trevor Gross <[email protected]>
Signed-off-by: Alice Ryhl <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
[ Reworded title. ]
Signed-off-by: Miguel Ojeda <[email protected]>
|
|
Currently, all macros are reexported with #[macro_export] only, which
means that to access `new_work!` from the workqueue, you need to import
it from the path `kernel::new_work` instead of importing it from the
workqueue module like all other items in the workqueue. By adding
reexports of the macros, it becomes possible to import the macros from
the correct modules.
It's still possible to import the macros from the root, but I don't
think we can do anything about that.
There is no functional change. This is merely a code cleanliness
improvement.
Signed-off-by: Alice Ryhl <[email protected]>
Reviewed-by: Trevor Gross <[email protected]>
Reviewed-by: Martin Rodriguez Reboredo <[email protected]>
Tested-by: Boqun Feng <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
[ Removed new `use kernel::prelude::*`s, reworded title. ]
Signed-off-by: Miguel Ojeda <[email protected]>
|
|
Increases readability by removing `super::` from the link preview
text.
Signed-off-by: Valentin Obst <[email protected]>
Reviewed-by: Trevor Gross <[email protected]>
Reviewed-by: Martin Rodriguez Reboredo <[email protected]>
Reviewed-by: Alice Ryhl <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Miguel Ojeda <[email protected]>
|
|
Remove explicit targets for doclinks in cases where rustdoc can
determine the correct target by itself. The goal is to reduce unneeded
verbosity in the source code.
Signed-off-by: Valentin Obst <[email protected]>
Reviewed-by: Trevor Gross <[email protected]>
Reviewed-by: Martin Rodriguez Reboredo <[email protected]>
Reviewed-by: Alice Ryhl <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Miguel Ojeda <[email protected]>
|
|
Add doclinks to existing documentation.
Signed-off-by: Valentin Obst <[email protected]>
Reviewed-by: Trevor Gross <[email protected]>
Reviewed-by: Martin Rodriguez Reboredo <[email protected]>
Reviewed-by: Alice Ryhl <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Miguel Ojeda <[email protected]>
|
|
Throughout the code base, blank lines are used before starting a code
block. Adapt outliers to improve consistency within the kernel crate.
Signed-off-by: Valentin Obst <[email protected]>
Reviewed-by: Trevor Gross <[email protected]>
Reviewed-by: Martin Rodriguez Reboredo <[email protected]>
Reviewed-by: Alice Ryhl <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Miguel Ojeda <[email protected]>
|
|
Fix places where comments include code fragments that are not enclosed
in backticks.
Signed-off-by: Valentin Obst <[email protected]>
Reviewed-by: Trevor Gross <[email protected]>
Reviewed-by: Martin Rodriguez Reboredo <[email protected]>
Reviewed-by: Alice Ryhl <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Miguel Ojeda <[email protected]>
|
|
Replace instances of 'ref-count[ed]' with 'refcount[ed]' to increase
consistency within the Rust documentation. The latter form is used more
widely in the rest of the kernel:
```console
$ rg '(\*|//).*?\srefcount(|ed)[\s,.]' | wc -l
1605
$ rg '(\*|//).*?\sref-count(|ed)[\s,.]' | wc -l
43
```
(numbers are for commit 052d534373b7 ("Merge tag 'exfat-for-6.8-rc1'
of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat"))
Signed-off-by: Valentin Obst <[email protected]>
Reviewed-by: Trevor Gross <[email protected]>
Reviewed-by: Martin Rodriguez Reboredo <[email protected]>
Reviewed-by: Alice Ryhl <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
[ Reworded to use the kernel's commit description style. ]
Signed-off-by: Miguel Ojeda <[email protected]>
|
|
SAFETY comments should immediately precede the unsafe block they
justify. Move assignment to `bar` past comment as it is safe.
Signed-off-by: Valentin Obst <[email protected]>
Reviewed-by: Trevor Gross <[email protected]>
Reviewed-by: Martin Rodriguez Reboredo <[email protected]>
Reviewed-by: Alice Ryhl <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Miguel Ojeda <[email protected]>
|
|
Throughout the module, bytes with the value zero are referred to as
`NUL` bytes. Adapt the only two outliers.
Signed-off-by: Valentin Obst <[email protected]>
Reviewed-by: Trevor Gross <[email protected]>
Reviewed-by: Martin Rodriguez Reboredo <[email protected]>
Reviewed-by: Alice Ryhl <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Miguel Ojeda <[email protected]>
|
|
Convert existing references to C header files to make use of
Commit bc2e7d5c298a ("rust: support `srctree`-relative links").
Signed-off-by: Valentin Obst <[email protected]>
Reviewed-by: Trevor Gross <[email protected]>
Reviewed-by: Martin Rodriguez Reboredo <[email protected]>
Reviewed-by: Alice Ryhl <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Miguel Ojeda <[email protected]>
|
|
Every other module ends its first line of documentation with a full
stop. Adapt the only outlier.
Signed-off-by: Valentin Obst <[email protected]>
Reviewed-by: Trevor Gross <[email protected]>
Reviewed-by: Martin Rodriguez Reboredo <[email protected]>
Reviewed-by: Alice Ryhl <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Miguel Ojeda <[email protected]>
|
|
The `from_err_ptr` function is safe. There is no need for the call to it
to be inside the unsafe block.
Reword the SAFETY comment to provide a better justification of why the
FFI call is safe.
Signed-off-by: Valentin Obst <[email protected]>
Reviewed-by: Martin Rodriguez Reboredo <[email protected]>
Reviewed-by: Alice Ryhl <[email protected]>
Reviewed-by: Trevor Gross <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Miguel Ojeda <[email protected]>
|
|
Fixes multiple trivial typos in documentation and comments of the
kernel crate.
allocator:
- Fix a trivial list item alignment issue in the last SAFETY comment of
`krealloc_aligned`.
init:
- Replace 'type' with 'trait' in the doc comments of the `PinInit` and
`Init` traits.
- Add colons before starting lists.
- Add spaces between the type and equal sign to respect the code
formatting rules in example code.
- End a sentence with a full stop instead of a colon.
ioctl:
- Replace 'an' with 'a' where appropriate.
str:
- Replace 'Return' with 'Returns' in the doc comment of `bytes_written`
as the text describes what the function does.
sync/lock:
- Fix a trivial list item alignment issue in the Safety section of the
`Backend` trait's description.
sync/lock/spinlock:
- The code in this module operates on spinlocks, not mutexes. Thus,
replace 'mutex' with 'spinlock' in the SAFETY comment of `unlock`.
workqueue:
- Replace "wont" with "won't" in the doc comment of `__enqueue`.
Signed-off-by: Valentin Obst <[email protected]>
Reviewed-by: Trevor Gross <[email protected]>
Reviewed-by: Martin Rodriguez Reboredo <[email protected]>
Reviewed-by: Alice Ryhl <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Miguel Ojeda <[email protected]>
|
|
Commit e563d0a7cdc1 ("workqueue: Break up enum definitions and give
names to the types") gives a name to the `enum` where `WORK_CPU_UNBOUND`
was defined, so `bindgen` changes its output from e.g.:
pub type _bindgen_ty_10 = core::ffi::c_uint;
pub const WORK_CPU_UNBOUND: _bindgen_ty_10 = 64;
to e.g.:
pub type wq_misc_consts = core::ffi::c_uint;
pub const wq_misc_consts_WORK_CPU_UNBOUND: wq_misc_consts = 64;
Thus update Rust's side to match the change (which requires a slight
reformat of the code), fixing the build error.
Closes: https://lore.kernel.org/rust-for-linux/CANiq72=9PZ89bCAVX0ZV4cqrYSLoZWyn-d_K4KpBMHjwUMdC3A@mail.gmail.com/
Fixes: e563d0a7cdc1 ("workqueue: Break up enum definitions and give names to the types")
Signed-off-by: Miguel Ojeda <[email protected]>
Reviewed-by: Boqun Feng <[email protected]>
Signed-off-by: Tejun Heo <[email protected]>
|
|
Reduce the chances of compilation failures due to integer type
mismatches in `CondVar`.
When an integer is defined using a #define in C, bindgen doesn't know
which integer type it is supposed to be, so it will just use `u32` by
default (if it fits in an u32). Whenever the right type is something
else, we insert a cast in Rust. However, this means that the code has a
lot of extra casts, and sometimes the code will be missing casts if u32
happens to be correct on the developer's machine, even though the type
might be something else on a different platform.
This patch updates all uses of such constants in
`rust/kernel/sync/condvar.rs` to use constants defined with the right
type. This allows us to remove various unnecessary casts, while also
future-proofing for the case where `unsigned int != u32` (even though
that is unlikely to ever happen in the kernel).
I wrote this patch at the suggestion of Benno in [1].
Link: https://lore.kernel.org/all/nAEg-6vbtX72ZY3oirDhrSEf06TBWmMiTt73EklMzEAzN4FD4mF3TPEyAOxBZgZtjzoiaBYtYr3s8sa9wp1uYH9vEWRf2M-Lf4I0BY9rAgk=@proton.me/ [1]
Suggested-by: Benno Lossin <[email protected]>
Reviewed-by: Tiago Lam <[email protected]>
Reviewed-by: Boqun Feng <[email protected]>
Reviewed-by: Benno Lossin <[email protected]>
Reviewed-by: Martin Rodriguez Reboredo <[email protected]>
Signed-off-by: Alice Ryhl <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
[ Added note on the unlikeliness of `sizeof(int)` changing. ]
Signed-off-by: Miguel Ojeda <[email protected]>
|
|
Sleep on a condition variable with a timeout.
This is used by Rust Binder for process freezing. There, we want to
sleep until the freeze operation completes, but we want to be able to
abort the process freezing if it doesn't complete within some timeout.
Note that it is not enough to avoid jiffies by introducing a variant of
`CondVar::wait_timeout` that takes the timeout in msecs because we need
to be able to restart the sleep with the remaining sleep duration if it
is interrupted, and if the API takes msecs rather than jiffies, then
that would require a conversion roundtrip jiffies->msecs->jiffies that
is best avoided.
Reviewed-by: Martin Rodriguez Reboredo <[email protected]>
Reviewed-by: Tiago Lam <[email protected]>
Reviewed-by: Boqun Feng <[email protected]>
Signed-off-by: Alice Ryhl <[email protected]>
Reviewed-by: Benno Lossin <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
[ Added `CondVarTimeoutResult` re-export and fixed typo. ]
Signed-off-by: Miguel Ojeda <[email protected]>
|
|
Defines type aliases and conversions for msecs and jiffies.
This is used by Rust Binder for process freezing. There, we want to
sleep until the freeze operation completes, but we want to be able to
abort the process freezing if it doesn't complete within some timeout.
The freeze timeout is supplied in msecs.
Note that we need to convert to jiffies in Binder. It is not enough to
introduce a variant of `CondVar::wait_timeout` that takes the timeout in
msecs because we need to be able to restart the sleep with the remaining
sleep duration if it is interrupted, and if the API takes msecs rather
than jiffies, then that would require a conversion roundtrip jiffies->
msecs->jiffies that is best avoided.
Suggested-by: Boqun Feng <[email protected]>
Reviewed-by: Boqun Feng <[email protected]>
Reviewed-by: Benno Lossin <[email protected]>
Reviewed-by: Martin Rodriguez Reboredo <[email protected]>
Reviewed-by: Tiago Lam <[email protected]>
Signed-off-by: Alice Ryhl <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Miguel Ojeda <[email protected]>
|
|
Wake up another thread synchronously.
This method behaves like `notify_one`, except that it hints to the
scheduler that the current thread is about to go to sleep, so it should
schedule the target thread on the same CPU.
This is used by Rust Binder as a performance optimization. When sending
a transaction to a different process, we usually know which thread will
handle it, so we can schedule that thread for execution next on this
CPU for better cache locality.
Reviewed-by: Benno Lossin <[email protected]>
Reviewed-by: Martin Rodriguez Reboredo <[email protected]>
Reviewed-by: Tiago Lam <[email protected]>
Reviewed-by: Boqun Feng <[email protected]>
Signed-off-by: Alice Ryhl <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Miguel Ojeda <[email protected]>
|
|
Fields named "wait_list" usually are of type "struct list_head". To
avoid confusion and because it is of type
"Opaque<bindings::wait_queue_head>" we are renaming "wait_list" to
"wait_queue_head".
Signed-off-by: Charalampos Mitrodimas <[email protected]>
Reviewed-by: Alice Ryhl <[email protected]>
Reviewed-by: Martin Rodriguez Reboredo <[email protected]>
Reviewed-by: Benno Lossin <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Miguel Ojeda <[email protected]>
|
|
This is the next upgrade to the Rust toolchain, from 1.74.1 to 1.75.0
(i.e. the latest) [1].
See the upgrade policy [2] and the comments on the first upgrade in
commit 3ed03f4da06e ("rust: upgrade to Rust 1.68.2").
# Unstable features
The `const_maybe_uninit_zeroed` unstable feature [3] was stabilized in
Rust 1.75.0, which we were using in the PHYLIB abstractions.
The only unstable features allowed to be used outside the `kernel` crate
are still `new_uninit,offset_of`, though other code to be upstreamed
may increase the list.
Please see [4] for details.
# Other improvements
Rust 1.75.0 stabilized `pointer_byte_offsets` [5] which we could
potentially use as an alternative for `ptr_metadata` in the future.
# Required changes
For this upgrade, no changes were required (i.e. on our side).
# `alloc` upgrade and reviewing
The vast majority of changes are due to our `alloc` fork being upgraded
at once.
There are two kinds of changes to be aware of: the ones coming from
upstream, which we should follow as closely as possible, and the updates
needed in our added fallible APIs to keep them matching the newer
infallible APIs coming from upstream.
Instead of taking a look at the diff of this patch, an alternative
approach is reviewing a diff of the changes between upstream `alloc` and
the kernel's. This allows to easily inspect the kernel additions only,
especially to check if the fallible methods we already have still match
the infallible ones in the new version coming from upstream.
Another approach is reviewing the changes introduced in the additions in
the kernel fork between the two versions. This is useful to spot
potentially unintended changes to our additions.
To apply these approaches, one may follow steps similar to the following
to generate a pair of patches that show the differences between upstream
Rust and the kernel (for the subset of `alloc` we use) before and after
applying this patch:
# Get the difference with respect to the old version.
git -C rust checkout $(linux/scripts/min-tool-version.sh rustc)
git -C linux ls-tree -r --name-only HEAD -- rust/alloc |
cut -d/ -f3- |
grep -Fv README.md |
xargs -IPATH cp rust/library/alloc/src/PATH linux/rust/alloc/PATH
git -C linux diff --patch-with-stat --summary -R > old.patch
git -C linux restore rust/alloc
# Apply this patch.
git -C linux am rust-upgrade.patch
# Get the difference with respect to the new version.
git -C rust checkout $(linux/scripts/min-tool-version.sh rustc)
git -C linux ls-tree -r --name-only HEAD -- rust/alloc |
cut -d/ -f3- |
grep -Fv README.md |
xargs -IPATH cp rust/library/alloc/src/PATH linux/rust/alloc/PATH
git -C linux diff --patch-with-stat --summary -R > new.patch
git -C linux restore rust/alloc
Now one may check the `new.patch` to take a look at the additions (first
approach) or at the difference between those two patches (second
approach). For the latter, a side-by-side tool is recommended.
Link: https://github.com/rust-lang/rust/blob/stable/RELEASES.md#version-1750-2023-12-28 [1]
Link: https://rust-for-linux.com/rust-version-policy [2]
Link: https://github.com/rust-lang/rust/issues/91850 [3]
Link: https://github.com/Rust-for-Linux/linux/issues/2 [4]
Link: https://github.com/rust-lang/rust/issues/96283 [5]
Reviewed-by: Vincenzo Palazzo <[email protected]>
Reviewed-by: Martin Rodriguez Reboredo <[email protected]>
Tested-by: Boqun Feng <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Miguel Ojeda <[email protected]>
|
|
Pull Rust updates from Miguel Ojeda:
"Another routine one in terms of features. In terms of lines, this time
the 'alloc' version upgrade is less prominent, given that it was
fairly small (and we did not have two upgrades)
Toolchain and infrastructure:
- Upgrade to Rust 1.74.1
The patch release includes a fix for an ICE that the Apple AGX GPU
driver was hitting
- Support 'srctree'-relative links in Rust code documentation
- Automate part of the manual constants handling (i.e. the ones not
recognised by 'bindgen')
- Suppress searching builtin sysroot to avoid confusion with
installed sysroots, needed for the to-be-merged arm64 support which
uses a builtin target
- Ignore '__preserve_most' functions for 'bindgen'
- Reduce header inclusion bloat in exports
'kernel' crate:
- Implement 'Debug' for 'CString'
- Make 'CondVar::wait()' an uninterruptible wait
'macros' crate:
- Update 'paste!' to accept string literals
- Improve '#[vtable]' documentation
Documentation:
- Add testing section (KUnit and 'rusttest' target)
- Remove 'CC=clang' mentions
- Clarify that 'rustup override' applies to build directory"
* tag 'rust-6.8' of https://github.com/Rust-for-Linux/linux:
docs: rust: Clarify that 'rustup override' applies to build directory
docs: rust: Add rusttest info
docs: rust: remove `CC=clang` mentions
rust: support `srctree`-relative links
rust: sync: Makes `CondVar::wait()` an uninterruptible wait
rust: upgrade to Rust 1.74.1
rust: Suppress searching builtin sysroot
rust: macros: improve `#[vtable]` documentation
rust: macros: update 'paste!' macro to accept string literals
rust: bindings: rename const binding using sed
rust: Ignore preserve-most functions
rust: replace <linux/module.h> with <linux/export.h> in rust/exports.c
rust: kernel: str: Implement Debug for CString
|
|
Some of our links use relative paths in order to point to files in the
source tree, e.g.:
//! C header: [`include/linux/printk.h`](../../../../include/linux/printk.h)
/// [`struct mutex`]: ../../../../include/linux/mutex.h
These are problematic because they are hard to maintain and do not support
`O=` builds.
Instead, provide support for `srctree`-relative links, e.g.:
//! C header: [`include/linux/printk.h`](srctree/include/linux/printk.h)
/// [`struct mutex`]: srctree/include/linux/mutex.h
The links are fixed after `rustdoc` generation to be based on the absolute
path to the source tree.
Essentially, this is the automatic version of Tomonori's fix [1],
suggested by Gary [2].
Suggested-by: Gary Guo <[email protected]>
Reported-by: FUJITA Tomonori <[email protected]>
Closes: https://lore.kernel.org/r/[email protected] [1]
Fixes: 48fadf440075 ("docs: Move rustdoc output, cross-reference it")
Link: https://lore.kernel.org/rust-for-linux/20231026154525.6d14b495@eugeo/ [2]
Reviewed-by: Martin Rodriguez Reboredo <[email protected]>
Reviewed-by: Benno Lossin <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Miguel Ojeda <[email protected]>
|
|
Currently, `CondVar::wait()` is an interruptible wait, and this is
different than `wait_event()` in include/linux/wait.h (which is an
uninterruptible wait). To avoid confusion between different APIs on the
interruptible/uninterruptible, make `CondVar::wait()` an uninterruptible
wait same as `wait_event()`, also rename the old `wait()` to
`CondVar::wait_interruptible()`.
Spotted-by: Tiago Lam <[email protected]>
Signed-off-by: Boqun Feng <[email protected]>
Reviewed-by: Benno Lossin <[email protected]>
Reviewed-by: Alice Ryhl <[email protected]>
Reviewed-by: Tiago Lam <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Miguel Ojeda <[email protected]>
|
|
This macro creates an array of kernel's `struct phy_driver` and
registers it. This also corresponds to the kernel's
`MODULE_DEVICE_TABLE` macro, which embeds the information for module
loading into the module binary file.
A PHY driver should use this macro.
Signed-off-by: FUJITA Tomonori <[email protected]>
Reviewed-by: Alice Ryhl <[email protected]>
Reviewed-by: Benno Lossin <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Reviewed-by: Trevor Gross <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
This patch adds abstractions to implement network PHY drivers; the
driver registration and bindings for some of callback functions in
struct phy_driver and many genphy_ functions.
This feature is enabled with CONFIG_RUST_PHYLIB_ABSTRACTIONS=y.
This patch enables unstable const_maybe_uninit_zeroed feature for
kernel crate to enable unsafe code to handle a constant value with
uninitialized data. With the feature, the abstractions can initialize
a phy_driver structure with zero easily; instead of initializing all
the members by hand. It's supposed to be stable in the not so distant
future.
Link: https://github.com/rust-lang/rust/pull/116218
Signed-off-by: FUJITA Tomonori <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Reviewed-by: Alice Ryhl <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Traits marked with `#[vtable]` need to provide default implementations
for optional functions. The C side represents these with `NULL` in the
vtable, so the default functions are never actually called. We do not
want to replicate the default behavior from C in Rust, because that is
not maintainable. Therefore we should use `build_error` in those default
implementations. The error message for that is provided at
`kernel::error::VTABLE_DEFAULT_ERROR`.
Signed-off-by: Benno Lossin <[email protected]>
Reviewed-by: Martin Rodriguez Reboredo <[email protected]>
Reviewed-by: Andreas Hindborg <[email protected]>
Reviewed-by: Alice Ryhl <[email protected]>
Reviewed-by: Finn Behrens <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
[ Wrapped paragraph to 80 as requested and capitalized sentence. ]
Signed-off-by: Miguel Ojeda <[email protected]>
|
|
Currently, for `const`s that bindgen doesn't recognise, we define a
helper constant with
const <TYPE> BINDINGS_<NAME> = <NAME>;
in `bindings_helper.h` and then we put
pub const <NAME>: <TYPE> = BINDINGS_<NAME>;
in `bindings/lib.rs`. This is fine since we currently only have 3
constants that are defined this way, but is going to be more annoying
when more constants are added since every new constant needs to be
defined in two places.
This patch changes the way we define constant helpers to
const <TYPE> RUST_CONST_HELPER_<NAME> = <NAME>;
and then use `sed` to postprocess Rust code generated by bindgen to
remove the distinct prefix, so users of the `bindings` crate can refer
to the name directly.
Reviewed-by: Benno Lossin <[email protected]>
Reviewed-by: Andreas Hindborg <[email protected]>
Reviewed-by: Martin Rodriguez Reboredo <[email protected]>
Signed-off-by: Gary Guo <[email protected]>
Reviewed-by: Alice Ryhl <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
[ Reworded for typos. ]
Signed-off-by: Miguel Ojeda <[email protected]>
|
|
Make it possible to use a `CString` with the `pr_*` macros directly. That
is, instead of:
pr_debug!("trying to open {:?}\n", &*filename);
we can now write:
pr_debug!("trying to open {:?}\n", filename);
Signed-off-by: Asahi Lina <[email protected]>
Reviewed-by: Alice Ryhl <[email protected]>
Reviewed-by: Benno Lossin <[email protected]>
Reviewed-by: Martin Rodriguez Reboredo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
[ Reworded to use Alice's commit message as discussed. ]
Signed-off-by: Miguel Ojeda <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq
Pull workqueue rust bindings from Tejun Heo:
"Add rust bindings to allow rust code to schedule work items on
workqueues.
While the current bindings don't cover all of the workqueue API, it
provides enough for basic usage and can be expanded as needed"
* tag 'wq-for-6.7-rust-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
rust: workqueue: add examples
rust: workqueue: add `try_spawn` helper method
rust: workqueue: implement `WorkItemPointer` for pointer types
rust: workqueue: add helper for defining work_struct fields
rust: workqueue: define built-in queues
rust: workqueue: add low-level workqueue bindings
rust: sync: add `Arc::{from_raw, into_raw}`
|
|
Pull rust updates from Miguel Ojeda:
"A small one compared to the previous one in terms of features. In
terms of lines, as usual, the 'alloc' version upgrade accounts for
most of them.
Toolchain and infrastructure:
- Upgrade to Rust 1.73.0
This time around, due to how the kernel and Rust schedules have
aligned, there are two upgrades in fact. They contain the fixes for
a few issues we reported to the Rust project.
In addition, a few cleanups indicated by the upgraded compiler or
possible thanks to it. For instance, the compiler now detects
redundant explicit links.
- A couple changes to the Rust 'Makefile' so that it can be used with
toybox tools, allowing Rust to be used in the Android kernel build.
x86:
- Enable IBT if enabled in C
Documentation:
- Add "The Rust experiment" section to the Rust index page
MAINTAINERS:
- Add Maintainer Entry Profile field ('P:').
- Update our 'W:' field to point to the webpage we have been building
this year"
* tag 'rust-6.7' of https://github.com/Rust-for-Linux/linux:
docs: rust: add "The Rust experiment" section
x86: Enable IBT in Rust if enabled in C
rust: Use grep -Ev rather than relying on GNU grep
rust: Use awk instead of recent xargs
rust: upgrade to Rust 1.73.0
rust: print: use explicit link in documentation
rust: task: remove redundant explicit link
rust: kernel: remove `#[allow(clippy::new_ret_no_self)]`
MAINTAINERS: add Maintainer Entry Profile field for Rust
MAINTAINERS: update Rust webpage
rust: upgrade to Rust 1.72.1
rust: arc: add explicit `drop()` around `Box::from_raw()`
|
|
The future `rustdoc` in the Rust 1.73.0 upgrade requires an explicit
link for `pr_info!`:
error: unresolved link to `pr_info`
--> rust/kernel/print.rs:395:63
|
395 | /// Use only when continuing a previous `pr_*!` macro (e.g. [`pr_info!`]).
| ^^^^^^^^ no item named `pr_info` in scope
|
= note: `macro_rules` named `pr_info` exists in this crate, but it is not in scope at this link's location
= note: `-D rustdoc::broken-intra-doc-links` implied by `-D warnings`
Thus do so to avoid a broken link while upgrading.
Reviewed-by: Alice Ryhl <[email protected]>
Reviewed-by: Vincenzo Palazzo <[email protected]>
Reviewed-by: Finn Behrens <[email protected]>
Reviewed-by: Martin Rodriguez Reboredo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Miguel Ojeda <[email protected]>
|
|
Starting with Rust 1.73.0, `rustdoc` detects redundant explicit
links with its new lint `redundant_explicit_links` [1]:
error: redundant explicit link target
--> rust/kernel/task.rs:85:21
|
85 | /// [`current`](crate::current) macro because it is safe.
| --------- ^^^^^^^^^^^^^^ explicit target is redundant
| |
| because label contains path that resolves to same destination
|
= note: when a link's destination is not specified,
the label is used to resolve intra-doc links
= note: `-D rustdoc::redundant-explicit-links` implied by `-D warnings`
help: remove explicit link target
|
85 | /// [`current`] macro because it is safe.
In order to avoid the warning in the compiler upgrade commit,
make it an intra-doc link as the tool suggests.
Link: https://github.com/rust-lang/rust/pull/113167 [1]
Reviewed-by: Finn Behrens <[email protected]>
Reviewed-by: Alice Ryhl <[email protected]>
Reviewed-by: Martin Rodriguez Reboredo <[email protected]>
Reviewed-by: Vincenzo Palazzo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Miguel Ojeda <[email protected]>
|
|
This patch fixes a trivial markdown style nit in the `SAFETY` comment.
Signed-off-by: Manmohan Shukla <[email protected]>
Reviewed-by: Alice Ryhl <[email protected]>
Reviewed-by: Jianguo Bao <[email protected]>
Reviewed-by: Vincenzo Palazzo <[email protected]>
Reviewed-by: Finn Behrens <[email protected]>
Reviewed-by: Benno Lossin <[email protected]>
Reviewed-by: Andreas Hindborg <[email protected]>
Fixes: c7e20faa5fca ("rust: error: Add Error::to_ptr()")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Miguel Ojeda <[email protected]>
|
|
A mistake was made and the description of `ECHILD` is wrong (it reuses
the description of `ENOEXEC`). This fixes it to reflect what's in
`errno-base.h`.
Signed-off-by: Wedson Almeida Filho <[email protected]>
Reviewed-by: Martin Rodriguez Reboredo <[email protected]>
Reviewed-by: Trevor Gross <[email protected]>
Reviewed-by: Finn Behrens <[email protected]>
Reviewed-by: Alice Ryhl <[email protected]>
Fixes: 266def2a0f5b ("rust: error: add codes from `errno-base.h`")
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
[ Use the plural, as noticed by Benno. ]
Signed-off-by: Miguel Ojeda <[email protected]>
|
|
Clippy triggered a false positive on its `new_ret_no_self` lint
when using the `pin_init!` macro. Since Rust 1.67.0, that does
not happen anymore, since Clippy learnt to not warn about
`-> impl Trait<Self>` [1][2].
The kernel nowadays uses Rust 1.72.1, thus remove the `#[allow]`.
Signed-off-by: Gary Guo <[email protected]>
Reviewed-by: Alice Ryhl <[email protected]>
Reviewed-by: Benno Lossin <[email protected]>
Reviewed-by: Finn Behrens <[email protected]>
Reviewed-by: Martin Rodriguez Reboredo <[email protected]>
Link: https://github.com/rust-lang/rust-clippy/issues/7344 [1]
Link: https://github.com/rust-lang/rust-clippy/pull/9733 [2]
Link: https://lore.kernel.org/r/[email protected]
[ Reworded slightly and added a couple `Link`s. ]
Signed-off-by: Miguel Ojeda <[email protected]>
|
|
`Box::from_raw()` is `#[must_use]`, which means the result cannot
go unused.
In Rust 1.71.0, this was not detected because the block expression
swallows the diagnostic [1]:
unsafe { Box::from_raw(self.ptr.as_ptr()) };
It would have been detected, however, if the line had been instead:
unsafe { Box::from_raw(self.ptr.as_ptr()); }
i.e. the semicolon being inside the `unsafe` block, rather than
outside.
In Rust 1.72.0, the compiler started warning about this [2], so
without this patch we will get:
error: unused return value of `alloc::boxed::Box::<T>::from_raw` that must be used
--> rust/kernel/sync/arc.rs:302:22
|
302 | unsafe { Box::from_raw(self.ptr.as_ptr()) };
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
= note: call `drop(Box::from_raw(ptr))` if you intend to drop the `Box`
= note: `-D unused-must-use` implied by `-D warnings`
help: use `let _ = ...` to ignore the resulting value
|
302 | unsafe { let _ = Box::from_raw(self.ptr.as_ptr()); };
| +++++++ +
Thus add an add an explicit `drop()` as the `#[must_use]`'s
annotation suggests (instead of the more general help line).
Link: https://github.com/rust-lang/rust/issues/104253 [1]
Link: https://github.com/rust-lang/rust/pull/112529 [2]
Reviewed-by: Martin Rodriguez Reboredo <[email protected]>
Reviewed-by: Gary Guo <[email protected]>
Reviewed-by: Alice Ryhl <[email protected]>
Reviewed-by: Andreas Hindborg <[email protected]>
Reviewed-by: Björn Roy Baron <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Miguel Ojeda <[email protected]>
|
|
This adds two examples of how to use the workqueue. The first example
shows how to use it when you only have one `work_struct` field, and the
second example shows how to use it when you have multiple `work_struct`
fields.
Signed-off-by: Alice Ryhl <[email protected]>
Reviewed-by: Martin Rodriguez Reboredo <[email protected]>
Reviewed-by: Gary Guo <[email protected]>
Reviewed-by: "Andreas Hindborg (Samsung)" <[email protected]>
Reviewed-by: Benno Lossin <[email protected]>
Reviewed-by: Boqun Feng <[email protected]>
Signed-off-by: Tejun Heo <[email protected]>
|
|
This adds a convenience method that lets you spawn a closure for
execution on a workqueue. This will be the most convenient way to use
workqueues, but it is fallible because it needs to allocate memory.
Co-developed-by: Gary Guo <[email protected]>
Signed-off-by: Gary Guo <[email protected]>
Signed-off-by: Alice Ryhl <[email protected]>
Reviewed-by: Martin Rodriguez Reboredo <[email protected]>
Reviewed-by: "Andreas Hindborg (Samsung)" <[email protected]>
Reviewed-by: Benno Lossin <[email protected]>
Reviewed-by: Boqun Feng <[email protected]>
Signed-off-by: Tejun Heo <[email protected]>
|
|
This implements the `WorkItemPointer` trait for the pointer types that
you are likely to use the workqueue with. The `Arc` type is for
reference counted objects, and the `Pin<Box<T>>` type is for objects
where the caller has exclusive ownership of the object.
Co-developed-by: Gary Guo <[email protected]>
Signed-off-by: Gary Guo <[email protected]>
Signed-off-by: Alice Ryhl <[email protected]>
Reviewed-by: Martin Rodriguez Reboredo <[email protected]>
Reviewed-by: "Andreas Hindborg (Samsung)" <[email protected]>
Reviewed-by: Benno Lossin <[email protected]>
Reviewed-by: Boqun Feng <[email protected]>
Signed-off-by: Tejun Heo <[email protected]>
|
|
The main challenge with defining `work_struct` fields is making sure
that the function pointer stored in the `work_struct` is appropriate for
the work item type it is embedded in. It needs to know the offset of the
`work_struct` field being used (even if there are several!) so that it
can do a `container_of`, and it needs to know the type of the work item
so that it can call into the right user-provided code. All of this needs
to happen in a way that provides a safe API to the user, so that users
of the workqueue cannot mix up the function pointers.
There are three important pieces that are relevant when doing this:
* The pointer type.
* The work item struct. This is what the pointer points at.
* The `work_struct` field. This is a field of the work item struct.
This patch introduces a separate trait for each piece. The pointer type
is given a `WorkItemPointer` trait, which pointer types need to
implement to be usable with the workqueue. This trait will be
implemented for `Arc` and `Box` in a later patch in this patchset.
Implementing this trait is unsafe because this is where the
`container_of` operation happens, but user-code will not need to
implement it themselves.
The work item struct should then implement the `WorkItem` trait. This
trait is where user-code specifies what they want to happen when a work
item is executed. It also specifies what the correct pointer type is.
Finally, to make the work item struct know the offset of its
`work_struct` field, we use a trait called `HasWork<T, ID>`. If a type
implements this trait, then the type declares that, at the given offset,
there is a field of type `Work<T, ID>`. The trait is marked unsafe
because the OFFSET constant must be correct, but we provide an
`impl_has_work!` macro that can safely implement `HasWork<T>` on a type.
The macro expands to something that only compiles if the specified field
really has the type `Work<T>`. It is used like this:
```
struct MyWorkItem {
work_field: Work<MyWorkItem, 1>,
}
impl_has_work! {
impl HasWork<MyWorkItem, 1> for MyWorkItem { self.work_field }
}
```
Note that since the `Work` type is annotated with an id, you can have
several `work_struct` fields by using a different id for each one.
Co-developed-by: Gary Guo <[email protected]>
Signed-off-by: Gary Guo <[email protected]>
Signed-off-by: Alice Ryhl <[email protected]>
Reviewed-by: Benno Lossin <[email protected]>
Reviewed-by: Martin Rodriguez Reboredo <[email protected]>
Reviewed-by: Andreas Hindborg <[email protected]>
Reviewed-by: Boqun Feng <[email protected]>
Signed-off-by: Tejun Heo <[email protected]>
|
|
We provide these methods because it lets us access these queues from
Rust without using unsafe code.
These methods return `&'static Queue`. References annotated with the
'static lifetime are used when the referent will stay alive forever.
That is ok for these queues because they are global variables and cannot
be destroyed.
Signed-off-by: Wedson Almeida Filho <[email protected]>
Co-developed-by: Alice Ryhl <[email protected]>
Signed-off-by: Alice Ryhl <[email protected]>
Reviewed-by: Martin Rodriguez Reboredo <[email protected]>
Reviewed-by: Gary Guo <[email protected]>
Reviewed-by: "Andreas Hindborg (Samsung)" <[email protected]>
Reviewed-by: Benno Lossin <[email protected]>
Reviewed-by: Boqun Feng <[email protected]>
Signed-off-by: Tejun Heo <[email protected]>
|
|
Define basic low-level bindings to a kernel workqueue. The API defined
here can only be used unsafely. Later commits will provide safe
wrappers.
Co-developed-by: Gary Guo <[email protected]>
Signed-off-by: Gary Guo <[email protected]>
Signed-off-by: Alice Ryhl <[email protected]>
Reviewed-by: Martin Rodriguez Reboredo <[email protected]>
Reviewed-by: "Andreas Hindborg (Samsung)" <[email protected]>
Reviewed-by: Benno Lossin <[email protected]>
Reviewed-by: Boqun Feng <[email protected]>
Signed-off-by: Tejun Heo <[email protected]>
|
|
These methods can be used to turn an `Arc` into a raw pointer and back,
in a way that preserves the metadata for fat pointers.
This is done using the unstable ptr_metadata feature [1]. However, it
could also be done using the unstable pointer_byte_offsets feature [2],
which is likely to have a shorter path to stabilization than
ptr_metadata.
Link: https://github.com/rust-lang/rust/issues/81513 [1]
Link: https://github.com/rust-lang/rust/issues/96283 [2]
Signed-off-by: Wedson Almeida Filho <[email protected]>
Co-developed-by: Alice Ryhl <[email protected]>
Signed-off-by: Alice Ryhl <[email protected]>
Reviewed-by: Gary Guo <[email protected]>
Reviewed-by: Martin Rodriguez Reboredo <[email protected]>
Reviewed-by: Benno Lossin <[email protected]>
Reviewed-by: Andreas Hindborg <[email protected]>
Reviewed-by: Boqun Feng <[email protected]>
Signed-off-by: Tejun Heo <[email protected]>
|
|
Pull rust updates from Miguel Ojeda:
"In terms of lines, most changes this time are on the pinned-init API
and infrastructure. While we have a Rust version upgrade, and thus a
bunch of changes from the vendored 'alloc' crate as usual, this time
those do not account for many lines.
Toolchain and infrastructure:
- Upgrade to Rust 1.71.1. This is the second such upgrade, which is a
smaller jump compared to the last time.
This version allows us to remove the '__rust_*' allocator functions
-- the compiler now generates them as expected, thus now our
'KernelAllocator' is used.
It also introduces the 'offset_of!' macro in the standard library
(as an unstable feature) which we will need soon. So far, we were
using a declarative macro as a prerequisite in some not-yet-landed
patch series, which did not support sub-fields (i.e. nested
structs):
#[repr(C)]
struct S {
a: u16,
b: (u8, u8),
}
assert_eq!(offset_of!(S, b.1), 3);
- Upgrade to bindgen 0.65.1. This is the first time we upgrade its
version.
Given it is a fairly big jump, it comes with a fair number of
improvements/changes that affect us, such as a fix needed to
support LLVM 16 as well as proper support for '__noreturn' C
functions, which are now mapped to return the '!' type in Rust:
void __noreturn f(void); // C
pub fn f() -> !; // Rust
- 'scripts/rust_is_available.sh' improvements and fixes.
This series takes care of all the issues known so far and adds a
few new checks to cover for even more cases, plus adds some more
help texts. All this together will hopefully make problematic
setups easier to identify and to be solved by users building the
kernel.
In addition, it adds a test suite which covers all branches of the
shell script, as well as tests for the issues found so far.
- Support rust-analyzer for out-of-tree modules too.
- Give 'cfg's to rust-analyzer for the 'core' and 'alloc' crates.
- Drop 'scripts/is_rust_module.sh' since it is not needed anymore.
Macros crate:
- New 'paste!' proc macro.
This macro is a more flexible version of 'concat_idents!': it
allows the resulting identifier to be used to declare new items and
it allows to transform the identifiers before concatenating them,
e.g.
let x_1 = 42;
paste!(let [<x _2>] = [<x _1>];);
assert!(x_1 == x_2);
The macro is then used for several of the pinned-init API changes
in this pull.
Pinned-init API:
- Make '#[pin_data]' compatible with conditional compilation of
fields, allowing to write code like:
#[pin_data]
pub struct Foo {
#[cfg(CONFIG_BAR)]
a: Bar,
#[cfg(not(CONFIG_BAR))]
a: Baz,
}
- New '#[derive(Zeroable)]' proc macro for the 'Zeroable' trait,
which allows 'unsafe' implementations for structs where every field
implements the 'Zeroable' trait, e.g.:
#[derive(Zeroable)]
pub struct DriverData {
id: i64,
buf_ptr: *mut u8,
len: usize,
}
- Add '..Zeroable::zeroed()' syntax to the 'pin_init!' macro for
zeroing all other fields, e.g.:
pin_init!(Buf {
buf: [1; 64],
..Zeroable::zeroed()
});
- New '{,pin_}init_array_from_fn()' functions to create array
initializers given a generator function, e.g.:
let b: Box<[usize; 1_000]> = Box::init::<Error>(
init_array_from_fn(|i| i)
).unwrap();
assert_eq!(b.len(), 1_000);
assert_eq!(b[123], 123);
- New '{,pin_}chain' methods for '{,Pin}Init<T, E>' that allow to
execute a closure on the value directly after initialization, e.g.:
let foo = init!(Foo {
buf <- init::zeroed()
}).chain(|foo| {
foo.setup();
Ok(())
});
- Support arbitrary paths in init macros, instead of just identifiers
and generic types.
- Implement the 'Zeroable' trait for the 'UnsafeCell<T>' and
'Opaque<T>' types.
- Make initializer values inaccessible after initialization.
- Make guards in the init macros hygienic.
'allocator' module:
- Use 'krealloc_aligned()' in 'KernelAllocator::alloc' preventing
misaligned allocations when the Rust 1.71.1 upgrade is applied
later in this pull.
The equivalent fix for the previous compiler version (where
'KernelAllocator' is not yet used) was merged into 6.5 already,
which added the 'krealloc_aligned()' function used here.
- Implement 'KernelAllocator::{realloc, alloc_zeroed}' for
performance, using 'krealloc_aligned()' too, which forwards the
call to the C API.
'types' module:
- Make 'Opaque' be '!Unpin', removing the need to add a
'PhantomPinned' field to Rust structs that contain C structs which
must not be moved.
- Make 'Opaque' use 'UnsafeCell' as the outer type, rather than
inner.
Documentation:
- Suggest obtaining the source code of the Rust's 'core' library
using the tarball instead of the repository.
MAINTAINERS:
- Andreas and Alice, from Samsung and Google respectively, are
joining as reviewers of the "RUST" entry.
As well as a few other minor changes and cleanups"
* tag 'rust-6.6' of https://github.com/Rust-for-Linux/linux: (42 commits)
rust: init: update expanded macro explanation
rust: init: add `{pin_}chain` functions to `{Pin}Init<T, E>`
rust: init: make `PinInit<T, E>` a supertrait of `Init<T, E>`
rust: init: implement `Zeroable` for `UnsafeCell<T>` and `Opaque<T>`
rust: init: add support for arbitrary paths in init macros
rust: init: add functions to create array initializers
rust: init: add `..Zeroable::zeroed()` syntax for zeroing all missing fields
rust: init: make initializer values inaccessible after initializing
rust: init: wrap type checking struct initializers in a closure
rust: init: make guards in the init macros hygienic
rust: add derive macro for `Zeroable`
rust: init: make `#[pin_data]` compatible with conditional compilation of fields
rust: init: consolidate init macros
docs: rust: clarify what 'rustup override' does
docs: rust: update instructions for obtaining 'core' source
docs: rust: add command line to rust-analyzer section
scripts: generate_rust_analyzer: provide `cfg`s for `core` and `alloc`
rust: bindgen: upgrade to 0.65.1
rust: enable `no_mangle_with_rust_abi` Clippy lint
rust: upgrade to Rust 1.71.1
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kunit updates from Shuah Khan:
- add support for running Rust documentation tests as KUnit tests
- make init, str, sync, types doctests compilable/testable
- add support for attributes API which include speed, modules
attributes, ability to filter and report attributes
- add support for marking tests slow using attributes API
- add attributes API documentation
- fix a wild-memory-access bug in kunit_filter_suites() and a possible
memory leak in kunit_filter_suites()
- add support for counting number of test suites in a module, list
action to kunit test modules, and test filtering on module tests
* tag 'linux-kselftest-kunit-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (25 commits)
kunit: fix struct kunit_attr header
kunit: replace KUNIT_TRIGGER_STATIC_STUB maro with KUNIT_STATIC_STUB_REDIRECT
kunit: Allow kunit test modules to use test filtering
kunit: Make 'list' action available to kunit test modules
kunit: Report the count of test suites in a module
kunit: fix uninitialized variables bug in attributes filtering
kunit: fix possible memory leak in kunit_filter_suites()
kunit: fix wild-memory-access bug in kunit_filter_suites()
kunit: Add documentation of KUnit test attributes
kunit: add tests for filtering attributes
kunit: time: Mark test as slow using test attributes
kunit: memcpy: Mark tests as slow using test attributes
kunit: tool: Add command line interface to filter and report attributes
kunit: Add ability to filter attributes
kunit: Add module attribute
kunit: Add speed attribute
kunit: Add test attributes API structure
MAINTAINERS: add Rust KUnit files to the KUnit entry
rust: support running Rust documentation tests as KUnit ones
rust: types: make doctests compilable/testable
...
|