| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The HCI_BREDR naming is confusing since it actually stands for Primary
Bluetooth Controller. Which is a term that has been used in the latest
standard. However from a legacy point of view there only really have
been Basic Rate (BR) and Enhanced Data Rate (EDR). Recent versions of
Bluetooth introduced Low Energy (LE) and made this terminology a little
bit confused since Dual Mode Controllers include BR/EDR and LE. To
simplify this the name HCI_PRIMARY stands for the Primary Controller
which can be a single mode or dual mode controller.
Signed-off-by: Marcel Holtmann <[email protected]>
Signed-off-by: Johan Hedberg <[email protected]>
|
|
The controller device attributes are not used and expose no valuable
information.
Signed-off-by: Marcel Holtmann <[email protected]>
Signed-off-by: Johan Hedberg <[email protected]>
|
|
The connection link attributes are not used and expose no valuable
information.
Signed-off-by: Marcel Holtmann <[email protected]>
Signed-off-by: Johan Hedberg <[email protected]>
|
|
When we introduced GSO support, if using auth the auth chunk was being
left queued on the packet even after the final segment was generated.
Later on sctp_transmit_packet it calls sctp_packet_reset, which zeroed
the packet len while not accounting for this left-over. This caused more
space to be used the next packet due to the chunk still being queued,
but space which wasn't allocated as its size wasn't accounted.
The fix is to only queue it back when we know that we are going to
generate another segment.
Fixes: 90017accff61 ("sctp: Add GSO support")
Signed-off-by: Marcelo Ricardo Leitner <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
The routing table of every switch in a tree is currently initialized to
all zeros. This is an issue since 0 is a valid port number.
Add a DSA_RTABLE_NONE=-1 constant to initialize the signed values of the
routing table pointing to other switches.
This fixes the device mapping of the mv88e6xxx driver where the port
pointing to the switch itself and to non-existent switches was wrongly
configured to be 0. It is now set to the expected 0xf value.
Signed-off-by: Vivien Didelot <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211
Johannes Berg says:
====================
Two more fixes:
* handle allocation failures in new(ish) A-MSDU decapsulation
* don't leak memory on nl80211 ACL parse errors
====================
Signed-off-by: David S. Miller <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
David Howells says:
====================
rxrpc: Improve conn/call lookup and fix call number generation [ver #3]
I've fixed a couple of patch descriptions and excised the patch that
duplicated the connections list for reconsideration at a later date.
For reference, the excised patch is sitting on the rxrpc-experimental
branch of my git tree, based on top of the rxrpc-rewrite branch. Diffing
it against yesterday's tag shows no differences.
Would you prefer the patch set to be emailed afresh instead of a git-pull
request?
David
---
Here's the next part of the AF_RXRPC rewrite. The two main purposes of
this set are to fix the call number handling and to make use of RCU when
looking up the connection or call to pass a received packet to.
Important changes in this set include:
(1) Avoidance of placing stack data into SG lists in rxkad so that kernel
stacks can become vmalloc'd (Herbert Xu).
(2) Calls cease pinning the connection they used as soon as possible,
which allows the connection to be discarded sooner and allows the call
channel on that connection to be reused earlier.
(3) Make each call channel on a connection have a separate and independent
call number space rather than having a shared number space for the
connection. Call numbers should increment monotonically per channel
on the client, and the server should ignore a call with a lower call
number for that channel than the latest it has seen. The RESPONSE
packet sets the minimum values of each call ID counter on a
connection.
(4) Look up calls by indexing the channel array on a connection rather
than by keeping calls in an rbtree on that connection. Also look up
calls using the channel array rather than using a hashtable.
The call hashtable can then be removed.
(5) Call terminal statuses are cached in the channel array for the last
call. It is assumed that if we the server have seen call N, then the
client no longer cares about call N-1 on the same channel.
This will allow retransmission of the terminal status in future
without the need to keep the rxrpc_call struct around.
(6) Peer lookups are moved out of common connection handling code and into
service connection handling code as client connections (a) must point
to a peer before they can be used and (b) are looked up by a
machine-unique connection ID directly, so we only need to look up the
peer first if we're going to deal with a service call.
(7) The reference count on a connection is held elevated by 1 whilst it is
alive (ie. idle unused connections have a refcount of 1). The reaper
will attempt to change the refcount from 1->0 and skip if this cannot
be done, whilst look ups only increment the refcount if it's non-zero.
This makes the implementation of RCU lookups easier as we don't have
to get a ref on the connection or a lock on the connection list to
prevent a connection being reaped whilst we're contemplating queueing
a packet that initiates a new service call upon it.
If we need to get a connection, but there's a dead connection in the
tree, we use rb_replace_node() to replace the dead one with a new one.
(8) Use a seqlock to validate the walk over the service connection rbtree
attached to a peer when it's being walked in RCU mode.
(9) Make the incoming call/connection packet handling code use RCU mode
and locks and make it only take a reference if the call/connection
gets queued on a workqueue.
The intention is that the next set will introduce the connection lifetime
management and capacity limits to prevent clients from overloading the
server.
There are some fixes too:
(1) Verifying that a packet coming in to a client connection came from the
expected source.
(2) Fix handling of connection failure in client call creation where we
don't reinitialise the list linkage block and a second attempt to
unlink the failed connection oopses and also we don't set the state
correctly, which causes an assertion failure.
(3) New service calls were being added to the socket's accept queue under
the wrong lock.
Changes:
(V2) In rxrpc_find_service_conn_rcu() initialised the sequence number to 0.
Fixed the RCU handling in conn_service.c by introducing and using
rb_replace_node_rcu() as an RCU-safe alternative in
rxrpc_publish_service_conn().
Modified and used rcu_dereference_raw() to avoid RCU sparse warnings
in rxrpc_find_service_conn_rcu().
Added in some missing RCU dereference wrappers. It seems to be
necessary to turn on CONFIG_PROVE_RCU_REPEATEDLY as well as
CONFIG_SPARSE_RCU_POINTER to get the static __rcu annotation checking
to happen.
Fixed some other sparse warnings, including a missing ntohs() in
jumbo packet processing.
(V3) Fixed some commit descriptions.
Excised the patch that duplicated the connection list to separate out
the procfs list for reconsideration at a later date.
====================
Signed-off-by: David S. Miller <[email protected]>
|
|
hfsc_sched is huge (size: 920, cachelines: 15), but we can get it to 14
cachelines by placing level after filter_cnt (covering 4 byte hole) and
reducing period/nactive/flags to u32 (period is just a counter,
incremented when class becomes active -- 2**32 is plenty for this
purpose, also, long is only 32bit wide on 32bit platforms anyway).
cl_vtperiod is exported to userspace via tc_hfsc_stats, but its period
member is already u32, so no precision is lost there either.
Cc: Michal Soltys <[email protected]>
Signed-off-by: Florian Westphal <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
We need to compute timeout.expires - jiffies, not the other way around.
Add a helper, another patch can then later change more places in
conntrack code where we currently open-code this.
Will allow us to only change one place later when we remove per-ct timer.
Signed-off-by: Florian Westphal <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>
|
|
When receiving neighbour information with short address option field we
should check the complete range of invalid short addresses and set it to
one invalid address setting which is the unspecified address. This
address is also used when by creating at first a new neighbour entry to
indicate no short address is set.
Signed-off-by: Alexander Aring <[email protected]>
Signed-off-by: Marcel Holtmann <[email protected]>
|
|
The RIOT-OS stack does send intra-pan frames but don't set the intra pan
flag inside the mac header. It seems this is valid frame addressing but
inefficient. Anyway this patch adds a new function for intra pan
addressing, doesn't matter if intra pan flag or source and destination
are the same. The newly introduction function will be used to check on
intra pan addressing for 6lowpan.
Signed-off-by: Alexander Aring <[email protected]>
Signed-off-by: Marcel Holtmann <[email protected]>
|
|
If recvmsg is called with a destination buffer that is too small to
receive the contents of skb in its entirety, the return value from
recvmsg was inconsistent with common SOCK_SEQPACKET or SOCK_DGRAM
semantics.
If destination buffer provided by userspace is too small (e.g. len <
copied), then MSG_TRUNC flag is set and copied is returned. Instead, it
should return the length of the message, which is consistent with how
other datagram based sockets act. Quoting 'man recv':
"All three calls return the length of the message on successful comple‐
tion. If a message is too long to fit in the supplied buffer, excess
bytes may be discarded depending on the type of socket the message is
received from."
and
"MSG_TRUNC (since Linux 2.2)
For raw (AF_PACKET), Internet datagram (since Linux
2.4.27/2.6.8), netlink (since Linux 2.6.22), and UNIX datagram
(since Linux 3.4) sockets: return the real length of the packet
or datagram, even when it was longer than the passed buffer."
Signed-off-by: Denis Kenzior <[email protected]>
Signed-off-by: Marcel Holtmann <[email protected]>
|
|
If recvmsg is called with a destination buffer that is too small to
receive the contents of skb in its entirety, the return value from
recvmsg was inconsistent with common SOCK_SEQPACKET or SOCK_DGRAM
semantics.
If destination buffer provided by userspace is too small (e.g. len <
copied), then MSG_TRUNC flag is set and copied is returned. Instead, it
should return the length of the message, which is consistent with how
other datagram based sockets act. Quoting 'man recv':
"All three calls return the length of the message on successful comple‐
tion. If a message is too long to fit in the supplied buffer, excess
bytes may be discarded depending on the type of socket the message is
received from."
and
"MSG_TRUNC (since Linux 2.2)
For raw (AF_PACKET), Internet datagram (since Linux
2.4.27/2.6.8), netlink (since Linux 2.6.22), and UNIX datagram
(since Linux 3.4) sockets: return the real length of the packet
or datagram, even when it was longer than the passed buffer."
Signed-off-by: Denis Kenzior <[email protected]>
Signed-off-by: Marcel Holtmann <[email protected]>
|
|
This patch reverts commit f9d1ce8f81eb ("ieee802154: fix netns settings").
The lowpan interface need to be created inside the net namespace where
the wpan interface is available. The wpan namespace can be changed only
by nl802154 before. Without this patch it's not possible to create a
lowpan interface for a wpan interface which isn't inside init_net
namespace.
Cc: Nicolas Dichtel <[email protected]>
Reviewed-by: Stefan Schmidt <[email protected]>
Signed-off-by: Alexander Aring <[email protected]>
Signed-off-by: Marcel Holtmann <[email protected]>
|
|
This patch adds netns support for 802.15.4 subsystem. Most parts are
copy&pasted from wireless subsystem, it has the identically userspace
API.
Cc: Nicolas Dichtel <[email protected]>
Reviewed-by: Stefan Schmidt <[email protected]>
Signed-off-by: Alexander Aring <[email protected]>
Signed-off-by: Marcel Holtmann <[email protected]>
|
|
This patch adds a missing check to handle short address parsing for
802.15.4 6LoWPAN only.
Signed-off-by: Alexander Aring <[email protected]>
Reviewed-by: Stefan Schmidt <[email protected]>
Signed-off-by: Marcel Holtmann <[email protected]>
|
|
This patch removes a double unlock case to accessing neighbour private
data.
Reported-by: Dan Carpenter <[email protected]>
Signed-off-by: Alexander Aring <[email protected]>
Reviewed-by: Stefan Schmidt <[email protected]>
Signed-off-by: Marcel Holtmann <[email protected]>
|
|
SMP does ECB crypto on stack buffers. This is complicated and
fragile, and it will not work if the stack is virtually allocated.
Switch to the crypto_cipher interface, which is simpler and safer.
Signed-off-by: Andy Lutomirski <[email protected]>
Acked-by: Herbert Xu <[email protected]>
Acked-by: Johan Hedberg <[email protected]>
Tested-by: Johan Hedberg <[email protected]>
Signed-off-by: Marcel Holtmann <[email protected]>
|
|
Some users observed that "least connection" distribution algorithm doesn't
handle well bursts of TCP connections from reconnecting clients after
a node or network failure.
This is because the algorithm counts active connection as worth 256
inactive ones where for TCP, "active" only means TCP connections in
ESTABLISHED state. In case of a connection burst, new connections are
handled before previous ones have finished the three way handshaking so
that all are still counted as "inactive", i.e. cheap ones. The become
"active" quickly but at that time, all of them are already assigned to one
real server (or few), resulting in highly unbalanced distribution.
Address this by counting the "pre-established" states as "active".
Signed-off-by: Michal Kubecek <[email protected]>
Acked-by: Julian Anastasov <[email protected]>
Signed-off-by: Simon Horman <[email protected]>
|
|
When using HEAD from
https://git.kernel.org/cgit/utils/kernel/ipvsadm/ipvsadm.git/,
the command:
ipvsadm --start-daemon backup --mcast-interface eth0.60 \
--mcast-group ff02::1:81
fails with the error message:
Argument list too long
whereas both:
ipvsadm --start-daemon master --mcast-interface eth0.60 \
--mcast-group ff02::1:81
and:
ipvsadm --start-daemon backup --mcast-interface eth0.60 \
--mcast-group 224.0.0.81
are successful.
The error message "Argument list too long" isn't helpful. The error occurs
because an IPv6 address is given in backup mode.
The error is in make_receive_sock() in net/netfilter/ipvs/ip_vs_sync.c,
since it fails to set the interface on the address or the socket before
calling inet6_bind() (via sock->ops->bind), where the test
'if (!sk->sk_bound_dev_if)' failed.
Setting sock->sk->sk_bound_dev_if on the socket before calling
inet6_bind() resolves the issue.
Fixes: d33288172e72 ("ipvs: add more mcast parameters for the sync daemon")
Signed-off-by: Quentin Armitage <[email protected]>
Acked-by: Julian Anastasov <[email protected]>
Signed-off-by: Simon Horman <[email protected]>
|
|
Pinned timers must carry the pinned attribute in the timer structure
itself, so convert the code to the new API.
No functional change.
Signed-off-by: Thomas Gleixner <[email protected]>
Reviewed-by: Frederic Weisbecker <[email protected]>
Cc: Arjan van de Ven <[email protected]>
Cc: Chris Mason <[email protected]>
Cc: Eric Dumazet <[email protected]>
Cc: George Spelvin <[email protected]>
Cc: Josh Triplett <[email protected]>
Cc: Len Brown <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Paul E. McKenney <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Rik van Riel <[email protected]>
Cc: [email protected]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next
Johannes Berg says:
====================
One more set of new features:
* beacon report (for radio measurement) support in cfg80211/mac80211
* hwsim: allow wmediumd in namespaces
* mac80211: extend 160MHz workaround to CSA IEs
* mesh: properly encrypt group-addressed privacy action frames
* mesh: allow setting peer AID
* first steps for MU-MIMO monitor mode
* along with various other cleanups and improvements
====================
Signed-off-by: David S. Miller <[email protected]>
|
|
into next
|
|
Conflicts:
drivers/net/ethernet/mellanox/mlx5/core/en.h
drivers/net/ethernet/mellanox/mlx5/core/en_main.c
drivers/net/usb/r8152.c
All three conflicts were overlapping changes.
Signed-off-by: David S. Miller <[email protected]>
|
|
Pablo Neira Ayuso says:
====================
Netfilter updates for net-next
The following patchset contains Netfilter updates for net-next,
they are:
1) Don't use userspace datatypes in bridge netfilter code, from
Tobin Harding.
2) Iterate only once over the expectation table when removing the
helper module, instead of once per-netns, from Florian Westphal.
3) Extra sanitization in xt_hook_ops_alloc() to return error in case
we ever pass zero hooks, xt_hook_ops_alloc():
4) Handle NFPROTO_INET from the logging core infrastructure, from
Liping Zhang.
5) Autoload loggers when TRACE target is used from rules, this doesn't
change the behaviour in case the user already selected nfnetlink_log
as preferred way to print tracing logs, also from Liping Zhang.
6) Conntrack slabs with SLAB_HWCACHE_ALIGN to allow rearranging fields
by cache lines, increases the size of entries in 11% per entry.
From Florian Westphal.
7) Skip zone comparison if CONFIG_NF_CONNTRACK_ZONES=n, from Florian.
8) Remove useless defensive check in nf_logger_find_get() from Shivani
Bhardwaj.
9) Remove zone extension as place it in the conntrack object, this is
always include in the hashing and we expect more intensive use of
zones since containers are in place. Also from Florian Westphal.
10) Owner match now works from any namespace, from Eric Bierdeman.
11) Make sure we only reply with TCP reset to TCP traffic from
nf_reject_ipv4, patch from Liping Zhang.
12) Introduce --nflog-size to indicate amount of network packet bytes
that are copied to userspace via log message, from Vishwanath Pai.
This obsoletes --nflog-range that has never worked, it was designed
to achieve this but it has never worked.
13) Introduce generic macros for nf_tables object generation masks.
14) Use generation mask in table, chain and set objects in nf_tables.
This allows fixes interferences with ongoing preparation phase of
the commit protocol and object listings going on at the same time.
This update is introduced in three patches, one per object.
15) Check if the object is active in the next generation for element
deactivation in the rbtree implementation, given that deactivation
happens from the commit phase path we have to observe the future
status of the object.
16) Support for deletion of just added elements in the hash set type.
17) Allow to resize hashtable from /proc entry, not only from the
obscure /sys entry that maps to the module parameter, from Florian
Westphal.
18) Get rid of NFT_BASECHAIN_DISABLED, this code is not exercised
anymore since we tear down the ruleset whenever the netdevice
goes away.
19) Support for matching inverted set lookups, from Arturo Borrero.
20) Simplify the iptables_mangle_hook() by removing a superfluous
extra branch.
21) Introduce ether_addr_equal_masked() and use it from the netfilter
codebase, from Joe Perches.
22) Remove references to "Use netfilter MARK value as routing key"
from the Netfilter Kconfig description given that this toggle
doesn't exists already for 10 years, from Moritz Sichert.
23) Introduce generic NF_INVF() and use it from the xtables codebase,
from Joe Perches.
24) Setting logger to NONE via /proc was not working unless explicit
nul-termination was included in the string. This fixes seems to
leave the former behaviour there, so we don't break backward.
====================
Signed-off-by: David S. Miller <[email protected]>
|
|
Speedy join only works when the received packet is either broadcast or an
4addr unicast packet. Thus packets converted from broadcast to unicast via
the gateway handling code have to be converted to 4addr packets to allow
the receiving gateway server to add the sender address as temporary entry
to the translation table.
Not doing it will make the batman-adv gateway server drop the DHCP response
in many situations because it doesn't yet have the TT entry for the
destination of the DHCP response.
Fixes: 371351731e9c ("batman-adv: change interface_rx to get orig node")
Signed-off-by: Sven Eckelmann <[email protected]>
Acked-by: Antonio Quartulli <[email protected]>
Signed-off-by: Marek Lindner <[email protected]>
Signed-off-by: Simon Wunderlich <[email protected]>
|
|
Previously, mesh power management functionality works only with kernel
MPM. Because user space MPM did not report mesh peer AID to kernel,
the kernel could not identify the bit in TIM element. So this patch
adds mesh peer AID setting API.
Signed-off-by: Masashi Honma <[email protected]>
Signed-off-by: Johannes Berg <[email protected]>
|
|
Continuing the workaround implemented in commit 23665aaf9170
("mac80211: Interoperability workaround for 80+80 and 160 MHz channels")
use the same code to parse the Wide Bandwidth Channel Switch element
by converting to VHT Operation element since the spec also just refers
to that for parsing semantics, particularly with the workaround.
While at it, remove some dead code - the IEEE80211_STA_DISABLE_40MHZ
flag can never be set at this point since it's checked earlier and the
wide_bw_chansw_ie pointer is set to NULL if it's set.
Signed-off-by: Johannes Berg <[email protected]>
|
|
Rather than reporting the scan as having completed, report it as
being aborted.
Signed-off-by: Johannes Berg <[email protected]>
|
|
Add the following to support beacon report radio measurement
with the measurement mode field set to passive or active:
1. Propagate the required scan duration to the device
2. Report the scan start time (in terms of TSF)
3. Report each BSS's detection time (also in terms of TSF)
TSF times refer to the BSS that the interface that requested the
scan is connected to.
Signed-off-by: Assaf Krauss <[email protected]>
Signed-off-by: Avraham Stern <[email protected]>
[changed ath9k/10k, at76c59x-usb, iwlegacy, wl1251 and wlcore to match
the new API]
Signed-off-by: Luca Coelho <[email protected]>
Signed-off-by: Johannes Berg <[email protected]>
|
|
Beacon report radio measurement requires reporting observed BSSs
on the channels specified in the beacon request. If the measurement
mode is set to passive or active, it requires actually performing a
scan (passive or active, accordingly), and reporting the time that
the scan was started and the time each beacon/probe was received
(both in terms of TSF of the BSS of the requesting AP). If the
request mode is table, this information is optional.
In addition, the radio measurement request specifies the channel
dwell time for the measurement.
In order to use scan for beacon report when the mode is active or
passive, add a parameter to scan request that specifies the
channel dwell time, and add scan start time and beacon received time
to scan results information.
Supporting beacon report is required for Multi Band Operation (MBO).
Signed-off-by: Assaf Krauss <[email protected]>
Signed-off-by: David Spinadel <[email protected]>
Signed-off-by: Avraham Stern <[email protected]>
Signed-off-by: Luca Coelho <[email protected]>
Signed-off-by: Johannes Berg <[email protected]>
|
|
add API to support VHT MU-MIMO air sniffer.
in MU-MIMO there are parallel frames on the air while the HW
has only one RX.
add the capability to sniff one of the MU-MIMO parallel frames by
giving the sniffer additional information so it'll know which
of the parallel frames it shall follow.
Add attribute - NL80211_ATTR_MU_MIMO_GROUP_DATA - for getting
a MU-MIMO groupID in order to monitor packets from that group
using VHT MU-MIMO.
And add attribute -NL80211_ATTR_MU_MIMO_FOLLOW_ADDR - for passing
MAC address to monitor mode.
that option will be used by VHT MU-MIMO air sniffer to follow a
station according to it's MAC address using VHT MU-MIMO.
Signed-off-by: Aviya Erenfeld <[email protected]>
Signed-off-by: Luca Coelho <[email protected]>
Signed-off-by: Johannes Berg <[email protected]>
|
|
The current implementation of handling ADDBA Request while a session
is already active with the peer is wrong - in case the peer is using
the existing session's dialog token this should be treated as update
to the session, which can update the timeout value.
We don't really have a good way of supporting that, so reject, but
implement the required behaviour in the spec of "Even if the updated
ADDBA Request frame is not accepted, the original Block ACK setup
remains active." (802.11-2012 10.5.4)
Signed-off-by: Johannes Berg <[email protected]>
|
|
Handle the case when dev_alloc_skb returns NULL.
Cc: [email protected]
Fixes: 2b67f944f88c2 ("cfg80211: reuse existing page fragments in A-MSDU rx")
Signed-off-by: Gregory Greenman <[email protected]>
Signed-off-by: Luca Coelho <[email protected]>
Signed-off-by: Johannes Berg <[email protected]>
|
|
No support for pbss results in a memory leak for the acl_data
(if parse_acl_data succeeds). Fix this by moving the ACL parsing later.
Cc: [email protected]
Fixes: 34d505193bd10 ("cfg80211: basic support for PBSS network type")
Signed-off-by: Purushottam Kushwaha <[email protected]>
Signed-off-by: Johannes Berg <[email protected]>
|
|
The call hash table is now no longer used as calls are looked up directly
by channel slot on the connection, so kill it off.
Signed-off-by: David Howells <[email protected]>
|
|
Move to using RCU access to a peer's service connection tree when routing
an incoming packet. This is done using a seqlock to trigger retrying of
the tree walk if a change happened.
Further, we no longer get a ref on the connection looked up in the
data_ready handler unless we queue the connection's work item - and then
only if the refcount > 0.
Note that I'm avoiding the use of a hash table for service connections
because each service connection is addressed by a 62-bit number
(constructed from epoch and connection ID >> 2) that would allow the client
to engage in bucket stuffing, given knowledge of the hash algorithm.
Peers, however, are hashed as the network address is less controllable by
the client. The total number of peers will also be limited in a future
commit.
Signed-off-by: David Howells <[email protected]>
|
|
Move the peer lookup done in input.c by data_ready into
rxrpc_find_connection().
Signed-off-by: David Howells <[email protected]>
|
|
Prune the contents of the rxrpc_conn_proto struct. Most of the fields aren't
used anymore.
Signed-off-by: David Howells <[email protected]>
|
|
Overhaul the usage count accounting for the rxrpc_connection struct to make
it easier to implement RCU access from the data_ready handler.
The problem is that currently we're using a lock to prevent the garbage
collector from trying to clean up a connection that we're contemplating
unidling. We could just stick incoming packets on the connection we find,
but we've then got a problem that we may race when dispatching a work item
to process it as we need to give that a ref to prevent the rxrpc_connection
struct from disappearing in the meantime.
Further, incoming packets may get discarded if attached to an
rxrpc_connection struct that is going away. Whilst this is not a total
disaster - the client will presumably resend - it would delay processing of
the call. This would affect the AFS client filesystem's service manager
operation.
To this end:
(1) We now maintain an extra count on the connection usage count whilst it
is on the connection list. This mean it is not in use when its
refcount is 1.
(2) When trying to reuse an old connection, we only increment the refcount
if it is greater than 0. If it is 0, we replace it in the tree with a
new candidate connection.
(3) Two connection flags are added to indicate whether or not a connection
is in the local's client connection tree (used by sendmsg) or the
peer's service connection tree (used by data_ready). This makes sure
that we don't try and remove a connection if it got replaced.
The flags are tested under lock with the removal operation to prevent
the reaper from killing the rxrpc_connection struct whilst someone
else is trying to effect a replacement.
This could probably be alleviated by using memory barriers between the
flag set/test and the rb_tree ops. The rb_tree op would still need to
be under the lock, however.
(4) When trying to reap an old connection, we try to flip the usage count
from 1 to 0. If it's not 1 at that point, then it must've come back
to life temporarily and we ignore it.
Signed-off-by: David Howells <[email protected]>
|
|
Move the lookup of a peer from a call that's being accepted into the
function that creates a new incoming connection. This will allow us to
avoid incrementing the peer's usage count in some cases in future.
Note that I haven't bother to integrate rxrpc_get_addr_from_skb() with
rxrpc_extract_addr_from_skb() as I'm going to delete the former in the very
near future.
Signed-off-by: David Howells <[email protected]>
|
|
Split the service-specific connection code out into into its own file. The
client-specific code has already been split out. This will leave just the
common code in the original file.
Signed-off-by: David Howells <[email protected]>
|
|
Split the client-specific connection code out into its own file. It will
behave somewhat differently from the service-specific connection code, so
it makes sense to separate them.
Signed-off-by: David Howells <[email protected]>
|
|
Each channel on a connection has a separate, independent number space from
which to allocate callNumber values. It is entirely possible, for example,
to have a connection with four active calls, each with call number 1.
Note that the callNumber values for any particular channel don't have to
start at 1, but they are supposed to increment monotonically for that
channel from a client's perspective and may not be reused once the call
number is transmitted (until the epoch cycles all the way back round).
Currently, however, call numbers are allocated on a per-connection basis
and, further, are held in an rb-tree. The rb-tree is redundant as the four
channel pointers in the rxrpc_connection struct are entirely capable of
pointing to all the calls currently in progress on a connection.
To this end, make the following changes:
(1) Handle call number allocation independently per channel.
(2) Get rid of the conn->calls rb-tree. This is overkill as a connection
may have a maximum of four calls in progress at any one time. Use the
pointers in the channels[] array instead, indexed by the channel
number from the packet.
(3) For each channel, save the result of the last call that was in
progress on that channel in conn->channels[] so that the final ACK or
ABORT packet can be replayed if necessary. Any call earlier than that
is just ignored. If we've seen the next call number in a packet, the
last one is most definitely defunct.
(4) When generating a RESPONSE packet for a connection, the call number
counter for each channel must be included in it.
(5) When parsing a RESPONSE packet for a connection, the call number
counters contained therein should be used to set the minimum expected
call numbers on each channel.
To do in future commits:
(1) Replay terminal packets based on the last call stored in
conn->channels[].
(2) Connections should be retired before the callNumber space on any
channel runs out.
(3) A server is expected to disregard or reject any new incoming call that
has a call number less than the current call number counter. The call
number counter for that channel must be advanced to the new call
number.
Note that the server cannot just require that the next call that it
sees on a channel be exactly the call number counter + 1 because then
there's a scenario that could cause a problem: The client transmits a
packet to initiate a connection, the network goes out, the server
sends an ACK (which gets lost), the client sends an ABORT (which also
gets lost); the network then reconnects, the client then reuses the
call number for the next call (it doesn't know the server already saw
the call number), but the server thinks it already has the first
packet of this call (it doesn't know that the client doesn't know that
it saw the call number the first time).
Signed-off-by: David Howells <[email protected]>
|
|
The socket's accept queue (socket->acceptq) should be accessed under
socket->call_lock, not under the connection lock.
Signed-off-by: David Howells <[email protected]>
|
|
Add RCU destruction for connections and calls as the RCU lookup from the
transport socket data_ready handler is going to come along shortly.
Whilst we're at it, move the cleanup workqueue flushing and RCU barrierage
into the destruction code for the objects that need it (locals and
connections) and add the extra RCU barrier required for connection cleanup.
Signed-off-by: David Howells <[email protected]>
|
|
When a call is disconnected, clear the call's pointer to the connection and
release the associated ref on that connection. This means that the call no
longer pins the connection and the connection can be discarded even before
the call is.
As the code currently stands, the call struct is effectively pinned by
userspace until userspace has enacted a recvmsg() to retrieve the final
call state as sk_buffs on the receive queue pin the call to which they're
related because:
(1) The rxrpc_call struct contains the userspace ID that recvmsg() has to
include in the control message buffer to indicate which call is being
referred to. This ID must remain valid until the terminal packet is
completely read and must be invalidated immediately at that point as
userspace is entitled to immediately reuse it.
(2) The final ACK to the reply to a client call isn't sent until the last
data packet is entirely read (it's probably worth altering this in
future to be send the ACK as soon as all the data has been received).
This change requires a bit of rearrangement to make sure that the call
isn't going to try and access the connection again after protocol
completion:
(1) Delete the error link earlier when we're releasing the call. Possibly
network errors should be distributed via connections at the cost of
adding in an access to the rxrpc_connection struct.
(2) Remove the call from the connection's call tree before disconnecting
the call. The call tree needs to be removed anyway and incoming
packets delivered by channel pointer instead.
(3) The release call event should be considered last after all other
events have been processed so that we don't need access to the
connection again.
(4) Move the channel_lock taking from rxrpc_release_call() to
rxrpc_disconnect_call() where it will be required in future.
Signed-off-by: David Howells <[email protected]>
|
|
If rxrpc_connect_call() fails during the creation of a client connection,
there are two bugs that we can hit that need fixing:
(1) The call state should be moved to RXRPC_CALL_DEAD before the call
cleanup phase is invoked. If not, this can cause an assertion failure
later.
(2) call->link should be reinitialised after being deleted in
rxrpc_new_client_call() - which otherwise leads to a failure later
when the call cleanup attempts to delete the link again.
Signed-off-by: David Howells <[email protected]>
|
|
Rather than calling rxrpc_get_connection() manually before calling
rxrpc_queue_conn(), do it inside the queue wrapper.
This allows us to do some important fixes:
(1) If the usage count is 0, do nothing. This prevents connections from
being reanimated once they're dead.
(2) If rxrpc_queue_work() fails because the work item is already queued,
retract the usage count increment which would otherwise be lost.
(3) Don't take a ref on the connection in the work function. By passing
the ref through the work item, this is unnecessary. Doing it in the
work function is too late anyway. Previously, connection-directed
packets held a ref on the connection, but that's not really the best
idea.
And another useful changes:
(*) Don't need to take a refcount on the connection in the data_ready
handler unless we invoke the connection's work item. We're using RCU
there so that's otherwise redundant.
Signed-off-by: David Howells <[email protected]>
|
|
Check that the client conns cache is empty before module removal and bug if
not, listing any offending connections that are still present. Unfortunately,
if there are connections still around, then the transport socket is still
unexpectedly open and active, so we can't just unallocate the connections.
Signed-off-by: David Howells <[email protected]>
|