aboutsummaryrefslogtreecommitdiff
path: root/net
AgeCommit message (Collapse)AuthorFilesLines
2016-03-03net: ipv6: Fix refcnt on host routesDavid Ahern1-5/+3
Andrew and Ying Huang's test robot both reported usage count problems that trace back to the 'keep address on ifdown' patch. >From Andrew: We execute CRIU test on linux-next. On the current linux-next kernel they hangs on creating a network namespace. The kernel log contains many massages like this: [ 1036.122108] unregister_netdevice: waiting for lo to become free. Usage count = 2 [ 1046.165156] unregister_netdevice: waiting for lo to become free. Usage count = 2 [ 1056.210287] unregister_netdevice: waiting for lo to become free. Usage count = 2 I tried to revert this patch and the bug disappeared. Here is a set of commands to reproduce this bug: [root@linux-next-test linux-next]# uname -a Linux linux-next-test 4.5.0-rc6-next-20160301+ #3 SMP Wed Mar 2 17:32:18 UTC 2016 x86_64 x86_64 x86_64 GNU/Linux [root@linux-next-test ~]# unshare -n [root@linux-next-test ~]# ip link set up dev lo [root@linux-next-test ~]# ip a 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever [root@linux-next-test ~]# logout [root@linux-next-test ~]# unshare -n ----- The problem is a change made to RTM_DELADDR case in __ipv6_ifa_notify that was added in an early version of the offending patch and is no longer needed. Fixes: f1705ec197e7 ("net: ipv6: Make address flushing on ifdown optional") Cc: Andrey Wagin <[email protected]> Cc: Ying Huang <[email protected]> Signed-off-by: David Ahern <[email protected]> Tested-by: Jeremiah Mahler <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-03-03net: mellanox: add DEVLINK dependenciesArnd Bergmann1-0/+9
The new NET_DEVLINK infrastructure can be a loadable module, but the drivers using it might be built-in, which causes link errors like: drivers/net/built-in.o: In function `mlx4_load_one': :(.text+0x2fbfda): undefined reference to `devlink_port_register' :(.text+0x2fc084): undefined reference to `devlink_port_unregister' drivers/net/built-in.o: In function `mlxsw_sx_port_remove': :(.text+0x33a03a): undefined reference to `devlink_port_type_clear' :(.text+0x33a04e): undefined reference to `devlink_port_unregister' There are multiple ways to avoid this: a) add 'depends on NET_DEVLINK || !NET_DEVLINK' dependencies for each user b) use 'select NET_DEVLINK' from each driver that uses it and hide the symbol in Kconfig. c) make NET_DEVLINK a 'bool' option so we don't have to list it as a dependency, and rely on the APIs to be stubbed out when it is disabled d) use IS_REACHABLE() rather than IS_ENABLED() to check for NET_DEVLINK in include/net/devlink.h This implements a variation of approach a) by adding an intermediate symbol that drivers can depend on, and changes the three drivers using it. Signed-off-by: Arnd Bergmann <[email protected]> Fixes: 09d4d087cd48 ("mlx4: Implement devlink interface") Fixes: c4745500e988 ("mlxsw: Implement devlink interface") Acked-by: Jiri Pirko <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-03-03ipv6: re-enable fragment header matching in ipv6_find_hdrFlorian Westphal1-1/+5
When ipv6_find_hdr is used to find a fragment header (caller specifies target NEXTHDR_FRAGMENT) we erronously return -ENOENT for all fragments with nonzero offset. Before commit 9195bb8e381d, when target was specified, we did not enter the exthdr walk loop as nexthdr == target so this used to work. Now we do (so we can skip empty route headers). When we then stumble upon a frag with nonzero frag_off we must return -ENOENT ("header not found") only if the caller did not specifically request NEXTHDR_FRAGMENT. This allows nfables exthdr expression to match ipv6 fragments, e.g. via nft add rule ip6 filter input frag frag-off gt 0 Fixes: 9195bb8e381d ("ipv6: improve ipv6_find_hdr() to skip empty routing headers") Signed-off-by: Florian Westphal <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-03-03tipc: Revert "tipc: use existing sk_write_queue for outgoing packet chain"Parthasarathy Bhuvaragan1-14/+19
reverts commit 94153e36e709e ("tipc: use existing sk_write_queue for outgoing packet chain") In Commit 94153e36e709e, we assume that we fill & empty the socket's sk_write_queue within the same lock_sock() session. This is not true if the link is congested. During congestion, the socket lock is released while we wait for the congestion to cease. This implementation causes a nullptr exception, if the user space program has several threads accessing the same socket descriptor. Consider two threads of the same program performing the following: Thread1 Thread2 -------------------- ---------------------- Enter tipc_sendmsg() Enter tipc_sendmsg() lock_sock() lock_sock() Enter tipc_link_xmit(), ret=ELINKCONG spin on socket lock.. sk_wait_event() : release_sock() grab socket lock : Enter tipc_link_xmit(), ret=0 : release_sock() Wakeup after congestion lock_sock() skb = skb_peek(pktchain); !! TIPC_SKB_CB(skb)->wakeup_pending = tsk->link_cong; In this case, the second thread transmits the buffers belonging to both thread1 and thread2 successfully. When the first thread wakeup after the congestion it assumes that the pktchain is intact and operates on the skb's in it, which leads to the following exception: [2102.439969] BUG: unable to handle kernel NULL pointer dereference at 00000000000000d0 [2102.440074] IP: [<ffffffffa005f330>] __tipc_link_xmit+0x2b0/0x4d0 [tipc] [2102.440074] PGD 3fa3f067 PUD 3fa6b067 PMD 0 [2102.440074] Oops: 0000 [#1] SMP [2102.440074] CPU: 2 PID: 244 Comm: sender Not tainted 3.12.28 #1 [2102.440074] RIP: 0010:[<ffffffffa005f330>] [<ffffffffa005f330>] __tipc_link_xmit+0x2b0/0x4d0 [tipc] [...] [2102.440074] Call Trace: [2102.440074] [<ffffffff8163f0b9>] ? schedule+0x29/0x70 [2102.440074] [<ffffffffa006a756>] ? tipc_node_unlock+0x46/0x170 [tipc] [2102.440074] [<ffffffffa005f761>] tipc_link_xmit+0x51/0xf0 [tipc] [2102.440074] [<ffffffffa006d8ae>] tipc_send_stream+0x11e/0x4f0 [tipc] [2102.440074] [<ffffffff8106b150>] ? __wake_up_sync+0x20/0x20 [2102.440074] [<ffffffffa006dc9c>] tipc_send_packet+0x1c/0x20 [tipc] [2102.440074] [<ffffffff81502478>] sock_sendmsg+0xa8/0xd0 [2102.440074] [<ffffffff81507895>] ? release_sock+0x145/0x170 [2102.440074] [<ffffffff815030d8>] ___sys_sendmsg+0x3d8/0x3e0 [2102.440074] [<ffffffff816426ae>] ? _raw_spin_unlock+0xe/0x10 [2102.440074] [<ffffffff81115c2a>] ? handle_mm_fault+0x6ca/0x9d0 [2102.440074] [<ffffffff8107dd65>] ? set_next_entity+0x85/0xa0 [2102.440074] [<ffffffff816426de>] ? _raw_spin_unlock_irq+0xe/0x20 [2102.440074] [<ffffffff8107463c>] ? finish_task_switch+0x5c/0xc0 [2102.440074] [<ffffffff8163ea8c>] ? __schedule+0x34c/0x950 [2102.440074] [<ffffffff81504e12>] __sys_sendmsg+0x42/0x80 [2102.440074] [<ffffffff81504e62>] SyS_sendmsg+0x12/0x20 [2102.440074] [<ffffffff8164aed2>] system_call_fastpath+0x16/0x1b In this commit, we maintain the skb list always in the stack. Signed-off-by: Parthasarathy Bhuvaragan <[email protected]> Acked-by: Ying Xue <[email protected]> Acked-by: Jon Maloy <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-03-03Merge branch 'for-upstream' of ↵David S. Miller10-62/+753
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next Johan Hedberg says: ==================== pull request: bluetooth-next 2016-03-01 Here's our main set of Bluetooth & 802.15.4 patches for the 4.6 kernel. - New Bluetooth HCI driver for Intel/AG6xx controllers - New Broadcom ACPI IDs - LED trigger support for indicating Bluetooth powered state - Various fixes in mac802154, 6lowpan and related drivers - New USB IDs for AR3012 Bluetooth controllers Please let me know if there are any issues pulling. Thanks. ==================== Signed-off-by: David S. Miller <[email protected]>
2016-03-03mld, igmp: Fix reserved tailroom calculationBenjamin Poirier2-4/+2
The current reserved_tailroom calculation fails to take hlen and tlen into account. skb: [__hlen__|__data____________|__tlen___|__extra__] ^ ^ head skb_end_offset In this representation, hlen + data + tlen is the size passed to alloc_skb. "extra" is the extra space made available in __alloc_skb because of rounding up by kmalloc. We can reorder the representation like so: [__hlen__|__data____________|__extra__|__tlen___] ^ ^ head skb_end_offset The maximum space available for ip headers and payload without fragmentation is min(mtu, data + extra). Therefore, reserved_tailroom = data + extra + tlen - min(mtu, data + extra) = skb_end_offset - hlen - min(mtu, skb_end_offset - hlen - tlen) = skb_tailroom - min(mtu, skb_tailroom - tlen) ; after skb_reserve(hlen) Compare the second line to the current expression: reserved_tailroom = skb_end_offset - min(mtu, skb_end_offset) and we can see that hlen and tlen are not taken into account. The min() in the third line can be expanded into: if mtu < skb_tailroom - tlen: reserved_tailroom = skb_tailroom - mtu else: reserved_tailroom = tlen Depending on hlen, tlen, mtu and the number of multicast address records, the current code may output skbs that have less tailroom than dev->needed_tailroom or it may output more skbs than needed because not all space available is used. Fixes: 4c672e4b ("ipv6: mld: fix add_grhead skb_over_panic for devs with large MTUs") Signed-off-by: Benjamin Poirier <[email protected]> Acked-by: Hannes Frederic Sowa <[email protected]> Acked-by: Daniel Borkmann <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-03-02net/ipv4: remove left over dead codeEric Engestrom1-7/+0
8cc785f6f429c2a3fb81745dc142cbd72a462c4a ("net: ipv4: make the ping /proc code AF-independent") removed the code using it, but renamed this variable instead of removing it. Signed-off-by: Eric Engestrom <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-03-02net/rtnetlink: remove dead codeEric Engestrom1-9/+0
3b766cd832328fcb87db3507e7b98cf42f21689d ("net/core: Add reading VF statistics through the PF netdevice") added that variable but it's never been used. Signed-off-by: Eric Engestrom <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-03-02RDS: IB: Support Fastreg MR (FRMR) memory registration modeAvinash Repaka6-5/+422
Fastreg MR(FRMR) is another method with which one can register memory to HCA. Some of the newer HCAs supports only fastreg mr mode, so we need to add support for it to have RDS functional on them. Signed-off-by: Santosh Shilimkar <[email protected]> Signed-off-by: Avinash Repaka <[email protected]> Signed-off-by: Santosh Shilimkar <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-03-02RDS: IB: allocate extra space on queues for FRMR support[email protected]2-4/+16
Fastreg MR(FRMR) memory registration and invalidation makes use of work request and completion queues for its operation. Patch allocates extra queue space towards these operation(s). Signed-off-by: Santosh Shilimkar <[email protected]> Signed-off-by: Santosh Shilimkar <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-03-02RDS: IB: add Fastreg MR (FRMR) detection support[email protected]3-0/+15
Discovere Fast Memmory Registration support using IB device IB_DEVICE_MEM_MGT_EXTENSIONS. Certain HCA might support just FRMR or FMR or both FMR and FRWR. In case both mr type are supported, default FMR is used. Default MR is still kept as FMR against what everyone else is following. Default will be changed to FRMR once the RDS performance with FRMR is comparable with FMR. The work is in progress for the same. Signed-off-by: Santosh Shilimkar <[email protected]> Signed-off-by: Santosh Shilimkar <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-03-02RDS: IB: add mr reused stats[email protected]3-1/+10
Add MR reuse statistics to RDS IB transport. Signed-off-by: Santosh Shilimkar <[email protected]> Signed-off-by: Santosh Shilimkar <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-03-02RDS: IB: handle the RDMA CM time wait event[email protected]1-0/+8
Drop the RDS connection on RDMA_CM_EVENT_TIMEWAIT_EXIT so that it can reconnect and resume. While testing fastreg, this error happened in couple of tests but was getting un-noticed. Signed-off-by: Santosh Shilimkar <[email protected]> Signed-off-by: Santosh Shilimkar <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-03-02RDS: IB: add connection info to ibmr[email protected]1-8/+9
Preperatory patch for FRMR support. From connection info, we can retrieve cm_id which contains qp handled needed for work request posting. We also need to drop the RDS connection on QP error states where connection handle becomes useful. Signed-off-by: Santosh Shilimkar <[email protected]> Signed-off-by: Santosh Shilimkar <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-03-02RDS: IB: move FMR code to its own file[email protected]3-106/+134
No functional change. Signed-off-by: Santosh Shilimkar <[email protected]> Signed-off-by: Santosh Shilimkar <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-03-02RDS: IB: create struct rds_ib_fmr[email protected]3-13/+29
Keep fmr related filed in its own struct. Fastreg MR structure will be added to the union. Signed-off-by: Santosh Shilimkar <[email protected]> Signed-off-by: Santosh Shilimkar <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-03-02RDS: IB: Re-organise ibmr code[email protected]6-347/+422
No functional changes. This is in preperation towards adding fastreg memory resgitration support. Signed-off-by: Santosh Shilimkar <[email protected]> Signed-off-by: Santosh Shilimkar <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-03-02RDS: IB: Remove the RDS_IB_SEND_OP dependency[email protected]3-20/+29
This helps to combine asynchronous fastreg MR completion handler with send completion handler. No functional change. Signed-off-by: Santosh Shilimkar <[email protected]> Signed-off-by: Santosh Shilimkar <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-03-02RDS: Add support for SO_TIMESTAMP for incoming messages[email protected]3-2/+45
The SO_TIMESTAMP generates time stamp for each incoming RDS messages User app can enable it by using SO_TIMESTAMP setsocketopt() at SOL_SOCKET level. CMSG data of cmsg type SO_TIMESTAMP contains the time stamp in struct timeval format. Reviewed-by: Sowmini Varadhan <[email protected]> Signed-off-by: Santosh Shilimkar <[email protected]> Signed-off-by: Santosh Shilimkar <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-03-02RDS: Drop stale iWARP RDMA transport[email protected]13-4611/+6
RDS iWarp support code has become stale and non testable. As indicated earlier, am dropping the support for it. If new iWarp user(s) shows up in future, we can adapat the RDS IB transprt for the special RDMA READ sink case. iWarp needs an MR for the RDMA READ sink. Signed-off-by: Santosh Shilimkar <[email protected]> Signed-off-by: Santosh Shilimkar <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-03-02netfilter: nft_masq: support port rangePablo Neira Ayuso3-13/+52
Complete masquerading support by allowing port range selection. Signed-off-by: Pablo Neira Ayuso <[email protected]>
2016-03-02netfilter: bridge: register hooks only when bridge interface is addedFlorian Westphal1-3/+65
This moves bridge hooks to a register-when-needed scheme. We use a device notifier to register the 'call-iptables' netfilter hooks only once a bridge gets added. This means that if the initial namespace uses a bridge, newly created network namespaces no longer get the PRE_ROUTING ipt_sabotage hook. It will registered in that network namespace once a bridge is created within that namespace. A few modules still use global hooks: - conntrack - bridge PF_BRIDGE hooks - IPVS - CLUSTER match (deprecated) - SYNPROXY As long as these modules are not loaded/used, a new network namespace has empty hook list and NF_HOOK() will boil down to single list_empty test even if initial namespace does stateless packet filtering. Signed-off-by: Florian Westphal <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]>
2016-03-02netfilter: xtables: don't hook tables by defaultFlorian Westphal15-206/+357
delay hook registration until the table is being requested inside a namespace. Historically, a particular table (iptables mangle, ip6tables filter, etc) was registered on module load. When netns support was added to iptables only the ip/ip6tables ruleset was made namespace aware, not the actual hook points. This means f.e. that when ipt_filter table/module is loaded on a system, then each namespace on that system has an (empty) iptables filter ruleset. In other words, if a namespace sends a packet, such skb is 'caught' by netfilter machinery and fed to hooking points for that table (i.e. INPUT, FORWARD, etc). Thanks to Eric Biederman, hooks are no longer global, but per namespace. This means that we can avoid allocation of empty ruleset in a namespace and defer hook registration until we need the functionality. We register a tables hook entry points ONLY in the initial namespace. When an iptables get/setockopt is issued inside a given namespace, we check if the table is found in the per-namespace list. If not, we attempt to find it in the initial namespace, and, if found, create an empty default table in the requesting namespace and register the needed hooks. Hook points are destroyed only once namespace is deleted, there is no 'usage count' (it makes no sense since there is no 'remove table' operation in xtables api). Signed-off-by: Florian Westphal <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]>
2016-03-02netfilter: xtables: prepare for on-demand hook registerFlorian Westphal14-76/+92
This change prepares for upcoming on-demand xtables hook registration. We change the protoypes of the register/unregister functions. A followup patch will then add nf_hook_register/unregister calls to the iptables one. Once a hook is registered packets will be picked up, so all assignments of the form net->ipv4.iptable_$table = new_table have to be moved to ip(6)t_register_table, else we can see NULL net->ipv4.iptable_$table later. This patch doesn't change functionality; without this the actual change simply gets too big. Signed-off-by: Florian Westphal <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]>
2016-03-02netfilter: nf_defrag_ipv4: Drop redundant ip_send_check()Joe Stringer1-3/+1
Since commit 0848f6428ba3 ("inet: frags: fix defragmented packet's IP header for af_packet"), ip_send_check() would be called twice for defragmentation that occurs from netfilter ipv4 defrag hooks. Remove the extra call. Signed-off-by: Joe Stringer <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]>
2016-03-02Merge tag 'ipvs-for-v4.6' of ↵Pablo Neira Ayuso2-17/+8
https://git.kernel.org/pub/scm/linux/kernel/git/horms/ipvs-next into HEAD Simon Horman says: ==================== please consider these cleanups for IPVS for v4.6. * Arnd Bergmann has resolved a bunch of unused variable warnings and; * Yannick Brosseau has removed a noisy debug message ==================== Signed-off-by: Pablo Neira Ayuso <[email protected]>
2016-03-02batman-adv: clarify CFG80211 dependencyArnd Bergmann1-1/+1
The driver calls cfg80211_get_station, which may be part of a module, so we must not enable BATMAN_ADV_BATMAN_V if BATMAN_ADV=y and CFG80211=m: net/built-in.o: In function `batadv_v_elp_get_throughput': (text+0x5c62c): undefined reference to `cfg80211_get_station' This clarifies the dependency to cover all combinations. Signed-off-by: Arnd Bergmann <[email protected]> Fixes: c833484e5f38 ("batman-adv: ELP - compute the metric based on the estimated throughput") Acked-by: Antonio Quartulli <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-03-02Merge tag 'mac80211-for-davem-2016-03-02' of ↵David S. Miller3-11/+30
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== Here are a few more fixes for the current cycle: * check GCMP encryption vs. fragmentation properly; we'd found this problem quite a while ago but waited for the 802.11 spec to be updated * fix RTS/CTS logic in minstrel_ht * fix RX of certain public action frames in AP mode * add mac80211_hwsim to MAC80211 in MAINTAINERS, this helps the kbuild robot pick up the right tree for it ==================== Signed-off-by: David S. Miller <[email protected]>
2016-03-01Merge tag 'batman-adv-for-davem' of git://git.open-mesh.org/linux-mergeDavid S. Miller22-36/+2173
Antonio Quartulli says: ==================== batman-adv 20160229 this is our (hopefully) latest batch of patches intended for net-next. With this patchset we finally introduce B.A.T.M.A.N. V: the latest version of our routing protocol. Technical documentation describing the protocol in more detail can be found in our wiki[1][2][3][4]. For what concerns this pull request, you can find the high level description right below. [1] https://www.open-mesh.org/projects/batman-adv/wiki/BATMAN_V [2] https://www.open-mesh.org/projects/batman-adv/wiki/OGMv2 [3] https://www.open-mesh.org/projects/batman-adv/wiki/ELP [4] https://www.open-mesh.org/projects/batman-adv/wiki/BATMAN_V_Tests ... With this patchset we finally introduce our new routing protocol: B.A.T.M.A.N. V. Its implementation started quite some years ago, but due to the big changes being introduced it took a while to be discussed, designed, worked, re-worked, tested and debugged (well, we're never done with the latest). The entire operation has basically been a team work involving all the core contributors together with other people interested in the project. The new protocol is divided into two main subcomponents, called respectively ELP and OGMv2. The former is in charge of dealing with the neighbour discovery and link quality estimation, while the latter implements the algorithm that spreads the metrics around the network and computes optimal paths. The biggest change introduced with B.A.T.M.A.N. V is the new metric: the protocol won't rely on packet loss anymore, but it will use the estimated throughput extracted directly from the wifi driver (when available) by querying cfg80211. Batman-adv will also send some unicast probing packets when an interface is not used for payload traffic to make sure that such values are current. The new protocol can be compiled-in or not like other features we have and when selected will pull in CFG80211 as dependency for the reason described above. Thanks to the big work brought up in the past by Marek Lindner, batman-adv can easily deal several protocol implementations, therefore compiling in this new version does not exclude the older. This means that the user is offered the option to choose the protocol when creating the mesh interface (default is the old one to keep backward compatibility). Along with the protocol there are some sysfs knobs that are introduced to fine tune some of its behaviours, but users are recommended to keep the default values unless they know what they are doing. The last patch is about advertising our own patchwork platform (thanks to Sven Eckelmann for having set that up!) in the MAINTAINERS file. ==================== Signed-off-by: David S. Miller <[email protected]>
2016-03-01net: pktgen: use reset to set mac headerZhang Shengju1-2/+2
Since offset is zero, it's not necessary to use set function. Signed-off-by: Zhang Shengju <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-03-01sch_mqprio: Fix build with older gcc.David S. Miller1-1/+1
CC [M] net/sched/sch_mqprio.o net/sched/sch_mqprio.c: In function ?mqprio_init?: net/sched/sch_mqprio.c:145: error: unknown field ?tc? specified in initializer net/sched/sch_mqprio.c:145: warning: missing braces around initializer net/sched/sch_mqprio.c:145: warning: (near initialization for ?tc.<anonymous>?) make[2]: *** [net/sched/sch_mqprio.o] Error 1 make[1]: *** [net/sched] Error 2 make: *** [net] Error 2 Several people reported this, surround the unnamed union member initialization with braces to fix. Signed-off-by: David S. Miller <[email protected]>
2016-03-01net: remove skb_sender_cpu_clear()WANG Cong8-14/+0
After commit 52bd2d62ce67 ("net: better skb->sender_cpu and skb->napi_id cohabitation") skb_sender_cpu_clear() becomes empty and can be removed. Cc: Eric Dumazet <[email protected]> Signed-off-by: Cong Wang <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-03-01sctp: sctp_remaddr_seq_show use the wrong variable to dump transport infoXin Long1-5/+5
Now in sctp_remaddr_seq_show(), we use variable *tsp to get the param *v. but *tsp is also used to traversal transport_addr_list, which will cover the previous value, and make sctp_transport_put work on the wrong transport. So fix it by adding a new variable to get the param *v. Fixes: fba4c330c5b9 ("sctp: hold transport before we access t->asoc in sctp proc") Signed-off-by: Xin Long <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-03-01sctp: lack the check for ports in sctp_v6_cmp_addrXin Long1-0/+2
As the member .cmp_addr of sctp_af_inet6, sctp_v6_cmp_addr should also check the port of addresses, just like sctp_v4_cmp_addr, cause it's invoked by sctp_cmp_addr_exact(). Now sctp_v6_cmp_addr just check the port when two addresses have different family, and lack the port check for two ipv6 addresses. that will make sctp_hash_cmp() cannot work well. so fix it by adding ports comparison in sctp_v6_cmp_addr(). Signed-off-by: Xin Long <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-03-01net: ipv6/l3mdev: Move host route on saved address if necessaryDavid Ahern1-0/+26
Commit f1705ec197e70 allows IPv6 addresses to be retained on a link down. The address can have a cached host route which can point to the wrong FIB table if the L3 enslavement is changed (e.g., route can point to local table instead of VRF table if device is added to an L3 domain). On link up check the table of the cached host route against the FIB table associated with the device and correct if needed. Signed-off-by: David Ahern <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-03-01net: sctp: Convert log timestamps to be y2038 safeDeepa Dinamani1-5/+5
SCTP probe log timestamps use struct timespec which is not y2038 safe. Use struct timespec64 which is 2038 safe instead. Use monotonic time instead of real time as only time differences are logged. Signed-off-by: Deepa Dinamani <[email protected]> Reviewed-by: Arnd Bergmann <[email protected]> Acked-by: Neil Horman <[email protected]> Cc: Vlad Yasevich <[email protected]> Cc: Neil Horman <[email protected]> Cc: "David S. Miller" <[email protected]> Cc: [email protected] Signed-off-by: David S. Miller <[email protected]>
2016-03-01net: ipv4: tcp_probe: Replace timespec with timespec64Deepa Dinamani1-4/+4
TCP probe log timestamps use struct timespec which is not y2038 safe. Even though timespec might be good enough here as it is used to represent delta time, the plan is to get rid of all uses of timespec in the kernel. Replace with struct timespec64 which is y2038 safe. Prints still use unsigned long format and type. Signed-off-by: Deepa Dinamani <[email protected]> Reviewed-by: Arnd Bergmann <[email protected]> Cc: "David S. Miller" <[email protected]> Cc: Alexey Kuznetsov <[email protected]> Cc: James Morris <[email protected]> Cc: Hideaki YOSHIFUJI <[email protected]> Cc: Patrick McHardy <[email protected]> Acked-by: YOSHIFUJI Hideaki <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-03-01net: ipv4: Convert IP network timestamps to be y2038 safeDeepa Dinamani3-12/+33
ICMP timestamp messages and IP source route options require timestamps to be in milliseconds modulo 24 hours from midnight UT format. Add inet_current_timestamp() function to support this. The function returns the required timestamp in network byte order. Timestamp calculation is also changed to call ktime_get_real_ts64() which uses struct timespec64. struct timespec64 is y2038 safe. Previously it called getnstimeofday() which uses struct timespec. struct timespec is not y2038 safe. Signed-off-by: Deepa Dinamani <[email protected]> Cc: "David S. Miller" <[email protected]> Cc: Alexey Kuznetsov <[email protected]> Cc: Hideaki YOSHIFUJI <[email protected]> Cc: James Morris <[email protected]> Cc: Patrick McHardy <[email protected]> Acked-by: YOSHIFUJI Hideaki <[email protected]> Acked-by: Arnd Bergmann <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-03-01Support to encoding decoding skb prio on IFE actionJamal Hadi Salim3-0/+82
Example usage: Set the skb priority using skbedit then allow it to be encoded sudo tc qdisc add dev $ETH root handle 1: prio sudo tc filter add dev $ETH parent 1: protocol ip prio 10 \ u32 match ip protocol 1 0xff flowid 1:2 \ action skbedit prio 17 \ action ife encode \ allow prio \ dst 02:15:15:15:15:15 Note: You dont need the skbedit action if you are already encoding the skb priority earlier. A zero skb priority will not be sent Alternative hard code static priority of decimal 33 (unlike skbedit) then mark of 0x12 every time the filter matches sudo $TC filter add dev $ETH parent 1: protocol ip prio 10 \ u32 match ip protocol 1 0xff flowid 1:2 \ action ife encode \ type 0xDEAD \ use prio 33 \ use mark 0x12 \ dst 02:15:15:15:15:15 Signed-off-by: Jamal Hadi Salim <[email protected]> Acked-by: Cong Wang <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-03-01Support to encoding decoding skb mark on IFE actionJamal Hadi Salim3-0/+85
Example usage: Set the skb using skbedit then allow it to be encoded sudo tc qdisc add dev $ETH root handle 1: prio sudo tc filter add dev $ETH parent 1: protocol ip prio 10 \ u32 match ip protocol 1 0xff flowid 1:2 \ action skbedit mark 17 \ action ife encode \ allow mark \ dst 02:15:15:15:15:15 Note: You dont need the skbedit action if you are already encoding the skb mark earlier. A zero skb mark, when seen, will not be encoded. Alternative hard code static mark of 0x12 every time the filter matches sudo $TC filter add dev $ETH parent 1: protocol ip prio 10 \ u32 match ip protocol 1 0xff flowid 1:2 \ action ife encode \ type 0xDEAD \ use mark 0x12 \ dst 02:15:15:15:15:15 Signed-off-by: Jamal Hadi Salim <[email protected]> Acked-by: Cong Wang <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-03-01introduce IFE actionJamal Hadi Salim3-0/+883
This action allows for a sending side to encapsulate arbitrary metadata which is decapsulated by the receiving end. The sender runs in encoding mode and the receiver in decode mode. Both sender and receiver must specify the same ethertype. At some point we hope to have a registered ethertype and we'll then provide a default so the user doesnt have to specify it. For now we enforce the user specify it. Lets show example usage where we encode icmp from a sender towards a receiver with an skbmark of 17; both sender and receiver use ethertype of 0xdead to interop. YYYY: Lets start with Receiver-side policy config: xxx: add an ingress qdisc sudo tc qdisc add dev $ETH ingress xxx: any packets with ethertype 0xdead will be subjected to ife decoding xxx: we then restart the classification so we can match on icmp at prio 3 sudo $TC filter add dev $ETH parent ffff: prio 2 protocol 0xdead \ u32 match u32 0 0 flowid 1:1 \ action ife decode reclassify xxx: on restarting the classification from above if it was an icmp xxx: packet, then match it here and continue to the next rule at prio 4 xxx: which will match based on skb mark of 17 sudo tc filter add dev $ETH parent ffff: prio 3 protocol ip \ u32 match ip protocol 1 0xff flowid 1:1 \ action continue xxx: match on skbmark of 0x11 (decimal 17) and accept sudo tc filter add dev $ETH parent ffff: prio 4 protocol ip \ handle 0x11 fw flowid 1:1 \ action ok xxx: Lets show the decoding policy sudo tc -s filter ls dev $ETH parent ffff: protocol 0xdead xxx: filter pref 2 u32 filter pref 2 u32 fh 800: ht divisor 1 filter pref 2 u32 fh 800::800 order 2048 key ht 800 bkt 0 flowid 1:1 (rule hit 0 success 0) match 00000000/00000000 at 0 (success 0 ) action order 1: ife decode action reclassify index 1 ref 1 bind 1 installed 14 sec used 14 sec type: 0x0 Metadata: allow mark allow hash allow prio allow qmap Action statistics: Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 xxx: Observe that above lists all metadatum it can decode. Typically these submodules will already be compiled into a monolithic kernel or loaded as modules YYYY: Lets show the sender side now .. xxx: Add an egress qdisc on the sender netdev sudo tc qdisc add dev $ETH root handle 1: prio xxx: xxx: Match all icmp packets to 192.168.122.237/24, then xxx: tag the packet with skb mark of decimal 17, then xxx: Encode it with: xxx: ethertype 0xdead xxx: add skb->mark to whitelist of metadatum to send xxx: rewrite target dst MAC address to 02:15:15:15:15:15 xxx: sudo $TC filter add dev $ETH parent 1: protocol ip prio 10 u32 \ match ip dst 192.168.122.237/24 \ match ip protocol 1 0xff \ flowid 1:2 \ action skbedit mark 17 \ action ife encode \ type 0xDEAD \ allow mark \ dst 02:15:15:15:15:15 xxx: Lets show the encoding policy sudo tc -s filter ls dev $ETH parent 1: protocol ip xxx: filter pref 10 u32 filter pref 10 u32 fh 800: ht divisor 1 filter pref 10 u32 fh 800::800 order 2048 key ht 800 bkt 0 flowid 1:2 (rule hit 0 success 0) match c0a87aed/ffffffff at 16 (success 0 ) match 00010000/00ff0000 at 8 (success 0 ) action order 1: skbedit mark 17 index 6 ref 1 bind 1 Action statistics: Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 action order 2: ife encode action pipe index 3 ref 1 bind 1 dst MAC: 02:15:15:15:15:15 type: 0xDEAD Metadata: allow mark Action statistics: Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 xxx: test by sending ping from sender to destination Signed-off-by: Jamal Hadi Salim <[email protected]> Acked-by: Cong Wang <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-03-01Merge tag 'mac80211-next-for-davem-2016-02-26' of ↵David S. Miller40-687/+1096
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg says: ==================== Here's another round of updates for -next: * big A-MSDU RX performance improvement (avoid linearize of paged RX) * rfkill changes: cleanups, documentation, platform properties * basic PBSS support in cfg80211 * MU-MIMO action frame processing support * BlockAck reordering & duplicate detection offload support * various cleanups & little fixes ==================== Signed-off-by: David S. Miller <[email protected]>
2016-03-01bridge: mcast: add support for more router port information dumpingNikolay Aleksandrov1-2/+14
Allow for more multicast router port information to be dumped such as timer and type attributes. For that that purpose we need to extend the MDBA_ROUTER_PORT attribute similar to how it was done for the mdb entries recently. The new format is thus: [MDBA_ROUTER_PORT] = { <- nested attribute u32 ifindex <- router port ifindex for user-space compatibility [MDBA_ROUTER_PATTR attributes] } This way it remains compatible with older users (they'll simply retrieve the u32 in the beginning) and new users can parse the remaining attributes. It would also allow to add future extensions to the router port without breaking compatibility. Signed-off-by: Nikolay Aleksandrov <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-03-01bridge: mcast: add support for temporary port routerNikolay Aleksandrov1-2/+19
Add support for a temporary router port which doesn't depend only on the incoming query. It can be refreshed if set to the same value, which is a no-op for the rest. Signed-off-by: Nikolay Aleksandrov <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-03-01bridge: mcast: do nothing if port's multicast_router is set to the same valNikolay Aleksandrov1-1/+4
This is needed for the upcoming temporary port router. There's no point to go through the logic if the value is the same. Signed-off-by: Nikolay Aleksandrov <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-03-01bridge: mcast: use names for the different multicast_router typesNikolay Aleksandrov1-28/+33
Using raw values makes it difficult to extend and also understand the code, give them names and do explicit per-option manipulation in br_multicast_set_port_router. Signed-off-by: Nikolay Aleksandrov <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-03-01net: dsa: support VLAN filtering switchdev attrVivien Didelot1-0/+21
When a user explicitly requests VLAN filtering with something like: # echo 1 > /sys/class/net/<bridge>/bridge/vlan_filtering Switchdev propagates a SWITCHDEV_ATTR_ID_BRIDGE_VLAN_FILTERING port attribute. Add support for it in the DSA layer with a new port_vlan_filtering function to let drivers toggle 802.1Q filtering on user demand. Signed-off-by: Vivien Didelot <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-03-01Introduce devlink infrastructureJiri Pirko3-0/+746
Introduce devlink infrastructure for drivers to register and expose to userspace via generic Netlink interface. There are two basic objects defined: devlink - one instance for every "parent device", for example switch ASIC devlink port - one instance for every physical port of the device. This initial portion implements basic get/dump of objects to userspace. Also, port splitter and port type setting is implemented. Signed-off-by: Jiri Pirko <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-03-01svcrdma: Use new CQ API for RPC-over-RDMA server send CQsChuck Lever4-175/+114
Calling ib_poll_cq() to sort through WCs during a completion is a common pattern amongst RDMA consumers. Since commit 14d3a3b2498e ("IB: add a proper completion queue abstraction"), WC sorting can be handled by the IB core. By converting to this new API, svcrdma is made a better neighbor to other RDMA consumers, as it allows the core to schedule the delivery of completions more fairly amongst all active consumers. This new API also aims each completion at a function that is specific to the WR's opcode. Thus the ctxt->wr_op field and the switch in process_context is replaced by a set of methods that handle each completion type. Because each ib_cqe carries a pointer to a completion method, the core can now post operations on a consumer's QP, and handle the completions itself. The server's rdma_stat_sq_poll and rdma_stat_sq_prod metrics are no longer updated. As a clean up, the cq_event_handler, the dto_tasklet, and all associated locking is removed, as they are no longer referenced or used. Signed-off-by: Chuck Lever <[email protected]> Tested-by: Steve Wise <[email protected]> Signed-off-by: J. Bruce Fields <[email protected]>
2016-03-01svcrdma: Use new CQ API for RPC-over-RDMA server receive CQsChuck Lever1-90/+39
Calling ib_poll_cq() to sort through WCs during a completion is a common pattern amongst RDMA consumers. Since commit 14d3a3b2498e ("IB: add a proper completion queue abstraction"), WC sorting can be handled by the IB core. By converting to this new API, svcrdma is made a better neighbor to other RDMA consumers, as it allows the core to schedule the delivery of completions more fairly amongst all active consumers. Because each ib_cqe carries a pointer to a completion method, the core can now post operations on a consumer's QP, and handle the completions itself. svcrdma receive completions no longer use the dto_tasklet. Each polled Receive WC is now handled individually in soft IRQ context. The server transport's rdma_stat_rq_poll and rdma_stat_rq_prod metrics are no longer updated. Signed-off-by: Chuck Lever <[email protected]> Signed-off-by: J. Bruce Fields <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.