aboutsummaryrefslogtreecommitdiff
path: root/net
AgeCommit message (Collapse)AuthorFilesLines
2014-05-29net, sunrpc: suppress allocation warning in rpc_malloc()David Rientjes1-2/+3
rpc_malloc() allocates with GFP_NOWAIT without making any attempt at reclaim so it easily fails when low on memory. This ends up spamming the kernel log: SLAB: Unable to allocate memory on node 0 (gfp=0x4000) cache: kmalloc-8192, object size: 8192, order: 1 node 0: slabs: 207/207, objs: 207/207, free: 0 rekonq: page allocation failure: order:1, mode:0x204000 CPU: 2 PID: 14321 Comm: rekonq Tainted: G O 3.15.0-rc3-12.gfc9498b-desktop+ #6 Hardware name: System manufacturer System Product Name/M4A785TD-V EVO, BIOS 2105 07/23/2010 0000000000000000 ffff880010ff17d0 ffffffff815e693c 0000000000204000 ffff880010ff1858 ffffffff81137bd2 0000000000000000 0000001000000000 ffff88011ffebc38 0000000000000001 0000000000204000 ffff88011ffea000 Call Trace: [<ffffffff815e693c>] dump_stack+0x4d/0x6f [<ffffffff81137bd2>] warn_alloc_failed+0xd2/0x140 [<ffffffff8113be19>] __alloc_pages_nodemask+0x7e9/0xa30 [<ffffffff811824a8>] kmem_getpages+0x58/0x140 [<ffffffff81183de6>] fallback_alloc+0x1d6/0x210 [<ffffffff81183be3>] ____cache_alloc_node+0x123/0x150 [<ffffffff81185953>] __kmalloc+0x203/0x490 [<ffffffffa06b0ee2>] rpc_malloc+0x32/0xa0 [sunrpc] [<ffffffffa06a6999>] call_allocate+0xb9/0x170 [sunrpc] [<ffffffffa06b19d8>] __rpc_execute+0x88/0x460 [sunrpc] [<ffffffffa06b2da9>] rpc_execute+0x59/0xc0 [sunrpc] [<ffffffffa06a932b>] rpc_run_task+0x6b/0x90 [sunrpc] [<ffffffffa077b5c1>] nfs4_call_sync_sequence+0x51/0x80 [nfsv4] [<ffffffffa077d45d>] _nfs4_do_setattr+0x1ed/0x280 [nfsv4] [<ffffffffa0782a72>] nfs4_do_setattr+0x72/0x180 [nfsv4] [<ffffffffa078334c>] nfs4_proc_setattr+0xbc/0x140 [nfsv4] [<ffffffffa074a7e8>] nfs_setattr+0xd8/0x240 [nfs] [<ffffffff811baa71>] notify_change+0x231/0x380 [<ffffffff8119cf5c>] chmod_common+0xfc/0x120 [<ffffffff8119df80>] SyS_chmod+0x40/0x90 [<ffffffff815f4cfd>] system_call_fastpath+0x1a/0x1f ... If the allocation fails, simply return NULL and avoid spamming the kernel log. Reported-by: Marc Dietrich <[email protected]> Signed-off-by: David Rientjes <[email protected]> Signed-off-by: Trond Myklebust <[email protected]>
2014-05-28mac80211: set new interfaces as idle upon initAvraham Stern1-0/+1
Mark new interfaces as idle to allow operations that require that interfaces are idle to take place. Interface types that are always not idle (like AP interfaces) will be set as not idle when they are assigned a channel context. Signed-off-by: Avraham Stern <[email protected]> Signed-off-by: Emmanuel Grumbach<[email protected]> Signed-off-by: Johannes Berg <[email protected]>
2014-05-28mac80211: reduce packet loss notifications under loadFelix Fietkau1-6/+19
During strong signal fluctuations under high throughput, few consecutive failed A-MPDU transmissions can easily trigger packet loss notification, and thus (in AP mode) client disconnection. Reduce the number of false positives by checking the A-MPDU status flag and treating a failed A-MPDU as a single packet. Signed-off-by: Felix Fietkau <[email protected]> Signed-off-by: Johannes Berg <[email protected]>
2014-05-28mac80211: don't check netdev state for debugfs read/writeArik Nemtsov1-4/+2
Doing so will lead to an oops for a p2p-dev interface, since it has no netdev. Cc: [email protected] Signed-off-by: Arik Nemtsov <[email protected]> Signed-off-by: Emmanuel Grumbach <[email protected]> Signed-off-by: Johannes Berg <[email protected]>
2014-05-28mac80211: fix a memory leak on sta rate selection tableFelix Fietkau1-0/+1
If the rate control algorithm uses a selection table, it is leaked when the station is destroyed - fix that. Signed-off-by: Felix Fietkau <[email protected]> Reported-by: Christophe Prévotaux <[email protected]> Fixes: 0d528d85c519 ("mac80211: improve the rate control API") Cc: [email protected] # v3.10+ [add commit log entry, remove pointless NULL check] Signed-off-by: Johannes Berg <[email protected]>
2014-05-27Merge branch 'master' of ↵John W. Linville46-653/+1570
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem
2014-05-27Merge branch 'master' of ↵John W. Linville4-16/+36
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless
2014-05-27regdb: Generalize the mW to dBm power conversion[email protected]1-12/+2
Generalize the power conversion from mW to dBm using log. This should fix the below compilation error for country NO which adds a new power value 2000mW which is not handled earlier. CC [M] net/wireless/wext-sme.o CC [M] net/wireless/regdb.o net/wireless/regdb.c:1130:1: error: Unknown undeclared here (not in a function) net/wireless/regdb.c:1130:9: error: expected } before power make[2]: *** [net/wireless/regdb.o] Error 1 make[1]: *** [net/wireless] Error 2 make: *** [net] Error 2 Reported-By: John Walker <[email protected]> Signed-off-by: Chaitanya T K <[email protected]> Acked-by: John W. Linville <[email protected]> [remove unneeded parentheses, fix rounding by using %.0f] Signed-off-by: Johannes Berg <[email protected]>
2014-05-27mac80211: fix IBSS join by initializing last_scan_completedKrzysztof Hałasa1-0/+1
Without this fix, freshly rebooted Linux creates a new IBSS instead of joining an existing one. Only when jiffies counter overflows after 5 minutes the IBSS can be successfully joined. Signed-off-by: Krzysztof Hałasa <[email protected]> [edit commit message slightly] Cc: [email protected] Signed-off-by: Johannes Berg <[email protected]>
2014-05-26cfg80211: send events when devices are added/removedJohannes Berg3-7/+22
We're currently sending NEW_WIPHY events for renames (which is a bit odd, but now can't be changed), but also send them for really new devices that register. Also send DEL_WIPHY events when a device is removed, the event ID for this was already reserved. Signed-off-by: Johannes Berg <[email protected]>
2014-05-26mac80211: fix virtual monitor interface additionEmmanuel Grumbach1-0/+1
Since the commit below, cfg80211_chandef_dfs_required() will warn if it gets a an NL80211_IFTYPE_UNSPECIFIED iftype as explicitely written in the commit log. When an virtual monitor interface is added, its type is set in ieee80211_sub_if_data.vif.type, but not in ieee80211_sub_if_data.wdev.iftype which is passed to cfg80211_chandef_dfs_required() hence resulting in the following warning: WARNING: CPU: 1 PID: 21265 at net/wireless/chan.c:376 cfg80211_chandef_dfs_required+0xbc/0x130 [cfg80211]() Modules linked in: [...] CPU: 1 PID: 21265 Comm: ifconfig Tainted: G W O 3.13.11+ #12 Hardware name: Dell Inc. Latitude E6410/0667CC, BIOS A01 03/05/2010 0000000000000009 ffff88008f5fdb08 ffffffff817d4219 ffff88008f5fdb50 ffff88008f5fdb40 ffffffff8106f57d 0000000000000000 0000000000000000 ffff880081062fb8 ffff8800810604e0 0000000000000001 ffff88008f5fdba0 Call Trace: [<ffffffff817d4219>] dump_stack+0x4d/0x66 [<ffffffff8106f57d>] warn_slowpath_common+0x7d/0xa0 [<ffffffff8106f5ec>] warn_slowpath_fmt+0x4c/0x50 [<ffffffffa04ea4ec>] cfg80211_chandef_dfs_required+0xbc/0x130 [cfg80211] [<ffffffffa06b1024>] ieee80211_vif_use_channel+0x94/0x500 [mac80211] [<ffffffffa0684e6b>] ieee80211_add_virtual_monitor+0x1ab/0x5c0 [mac80211] [<ffffffffa0686ae5>] ieee80211_do_open+0xe75/0x1580 [mac80211] [<ffffffffa0687259>] ieee80211_open+0x69/0x70 [mac80211] [snip] Fixes: 00ec75fc5a64 ("cfg80211: pass the actual iftype when calling cfg80211_chandef_dfs_required()") Signed-off-by: Emmanuel Grumbach <[email protected]> Acked-by: Luciano Coelho <[email protected]> Signed-off-by: Johannes Berg <[email protected]>
2014-05-26mac80211: add a single-transaction driver op to switch contextsLuciano Coelho2-0/+138
In some cases, when the driver is already using all the channel contexts it can handle at once, we have to do an in-place switch (ie. we cannot afford using an extra context temporarily for the transaction). But some drivers may not support switching the channel context assigned to a vif on the fly (ie. without unassigning and assigning it) while others may only work if the context is changed on the fly, without unassigning it first. To allow these different scenarios, add a new driver operation that let's the driver decide how to handle an in-place switch. Signed-off-by: Luciano Coelho <[email protected]> Signed-off-by: Johannes Berg <[email protected]>
2014-05-26netfilter: bridge: fix Kconfig unmet dependenciesPablo Neira2-6/+3
Before f5efc69 ("netfilter: nf_tables: Add meta expression key for bridge interface name"), the entire net/bridge/netfilter/ directory depended on BRIDGE_NF_EBTABLES, ie. on ebtables. However, that directory already contained the nf_tables bridge extension that we should allow to compile separately. In f5efc69, we tried to generalize this by using CONFIG_BRIDGE_NETFILTER which was not a good idea since this option already existed and it is dedicated to enable the Netfilter bridge IP/ARP filtering. Let's try to fix this mess by: 1) making net/bridge/netfilter/ dependent on the toplevel CONFIG_NETFILTER option, just like we do with the net/netfilter and net/ipv{4,6}/netfilter/ directories. 2) Changing 'selects' to 'depends on' NETFILTER_XTABLES for BRIDGE_NF_EBTABLES. I believe this problem was already before f5efc69: warning: (BRIDGE_NF_EBTABLES) selects NETFILTER_XTABLES which has unmet direct dependencies (NET && INET && NETFILTER) 3) Fix ebtables/nf_tables bridge dependencies by making NF_TABLES_BRIDGE and BRIDGE_NF_EBTABLES dependent on BRIDGE and NETFILTER: warning: (NF_TABLES_BRIDGE && BRIDGE_NF_EBTABLES) selects BRIDGE_NETFILTER which has unmet direct dependencies (NET && BRIDGE && NETFILTER && INET && NETFILTER_ADVANCED) net/built-in.o: In function `br_parse_ip_options': br_netfilter.c:(.text+0x4a5ba): undefined reference to `ip_options_compile' br_netfilter.c:(.text+0x4a5ed): undefined reference to `ip_options_rcv_srr' net/built-in.o: In function `br_nf_pre_routing_finish': br_netfilter.c:(.text+0x4a8a4): undefined reference to `ip_route_input_noref' br_netfilter.c:(.text+0x4a987): undefined reference to `ip_route_output_flow' make: *** [vmlinux] Error 1 Reported-by: Jim Davis <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2014-05-26ipvs: Fix panic due to non-linear skbPeter Christensen1-5/+10
Receiving a ICMP response to an IPIP packet in a non-linear skb could cause a kernel panic in __skb_pull. The problem was introduced in commit f2edb9f7706dcb2c0d9a362b2ba849efe3a97f5e ("ipvs: implement passive PMTUD for IPIP packets"). Signed-off-by: Peter Christensen <[email protected]> Acked-by: Julian Anastasov <[email protected]> Signed-off-by: Simon Horman <[email protected]>
2014-05-26NFC: nfc_sock_link() can be staticFengguang Wu1-2/+2
CC: Hiren Tandel <[email protected]> CC: Samuel Ortiz <[email protected]> Signed-off-by: Fengguang Wu <[email protected]> Signed-off-by: Samuel Ortiz <[email protected]>
2014-05-26NFC: digital: digital_in_send_attrib_req() can be staticFengguang Wu1-1/+1
CC: "Mark A. Greer" <[email protected]> CC: Samuel Ortiz <[email protected]> Signed-off-by: Fengguang Wu <[email protected]> Signed-off-by: Samuel Ortiz <[email protected]>
2014-05-26NFC: digital: Randomize poll cyclesThierry Escande1-2/+4
This change adds some entropy to polling cycles, choosing the next polling rf technology randomly. This reflects the change done in the pn533 driver, avoiding possible infinite loop for devices that export 2 targets on 2 different modulations. If the first target is not readable, we will stay in an error loop for ever. Signed-off-by: Thierry Escande <[email protected]> Signed-off-by: Samuel Ortiz <[email protected]>
2014-05-26NFC: digital: Return proper error code when sending ATR_REQThierry Escande1-3/+2
The error code returned by digital_in_send_cmd() was not returned by digital_in_send_atr_req(). Signed-off-by: Thierry Escande <[email protected]> Signed-off-by: Samuel Ortiz <[email protected]>
2014-05-24tipc: Don't reset the timeout when restartingArnaldo Carvalho de Melo1-3/+5
As it may then take longer than what the user specified using setsockopt(SO_RCVTIMEO). Signed-off-by: Arnaldo Carvalho de Melo <[email protected]> Signed-off-by: Jon Maloy <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2014-05-24Merge branch 'for-davem' of ↵David S. Miller1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless John W. Linville says: ==================== pull request: wireless 2014-05-23 I have two more fixes intended for the 3.15 stream... For the iwlwifi one, Emmanuel says: "A race has been discovered in the beacon filtering code. Since the fix is too big for 3.15, I disable here the feature." For the bluetooth one, Gustavo says: "This pull request contains a very important fix for 3.15. Here we fix the permissions of a debugfs file that would otherwise allow unauthorized users to write content to it." Please let me know if there are problems! ==================== Signed-off-by: David S. Miller <[email protected]>
2014-05-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller40-173/+420
Conflicts: drivers/net/bonding/bond_alb.c drivers/net/ethernet/altera/altera_msgdma.c drivers/net/ethernet/altera/altera_sgdma.c net/ipv6/xfrm6_output.c Several cases of overlapping changes. The xfrm6_output.c has a bug fix which overlaps the renaming of skb->local_df to skb->ignore_df. In the Altera TSE driver cases, the register access cleanups in net-next overlapped with bug fixes done in net. Similarly a bug fix to send ALB packets in the bonding driver using the right source address overlaps with cleanups in net-next. Signed-off-by: David S. Miller <[email protected]>
2014-05-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds57-297/+556
Pull networking fixes from David Miller: "It looks like a sizeble collection but this is nearly 3 weeks of bug fixing while you were away. 1) Fix crashes over IPSEC tunnels with NAT, the latter can reroute the packet through a non-IPSEC protected path and the code has to be able to handle SKBs attached to routes lacking an attached xfrm state. From Steffen Klassert. 2) Fix OOPSs in ipv4 and ipv6 ipsec layers for unsupported sub-protocols, also from Steffen Klassert. 3) Set local_df on fragmented netfilter skbs otherwise we won't be able to forward successfully, from Florian Westphal. 4) cdc_mbim ipv6 neighbour code does __vlan_find_dev_deep without holding RCU lock, from Bjorn Mork. 5) local_df test in ip_may_fragment is inverted, from Florian Westphal. 6) jme driver doesn't check for DMA mapping failures, from Neil Horman. 7) qlogic driver doesn't calculate number of TX queues properly, from Shahed Shaikh. 8) fib_info_cnt can drift irreversibly positive if we fail to allocate the fi->fib_metrics array, from Sergey Popovich. 9) Fix use after free in ip6_route_me_harder(), also from Sergey Popovich. 10) When SYSCTL is disabled, we don't handle local_port_range and ping_group_range defaults properly at all, from Cong Wang. 11) Unaccelerated VLAN tagged frames improperly handled by cdc_mbim driver, fix from Bjorn Mork. 12) cassini driver needs nested lock annotations for TX locking, from Emil Goode. 13) On init error ipv6 VTI driver can unregister pernet ops twice, oops. Fix from Mahtias Krause. 14) If macvlan device is down, don't propagate IFF_ALLMULTI changes, from Peter Christensen. 15) Missing NULL pointer check while parsing netlink config options in ip6_tnl_validate(). From Susant Sahani. 16) Fix handling of neighbour entries during ipv6 router reachability probing, from Duan Jiong. 17) x86 and s390 JIT address randomization has some address calculation bugs leading to crashes, from Alexei Starovoitov and Heiko Carstens. 18) Clear up those uglies with nop patching and net_get_random_once(), from Hannes Frederic Sowa. 19) Option length miscalculated in ip6_append_data(), fix also from Hannes Frederic Sowa. 20) A while ago we fixed a race during device unregistry when a namespace went down, turns out there is a second place that needs similar protection. From Cong Wang. 21) In the new Altera TSE driver multicast filtering isn't working, disable it and just use promisc mode until the cause is found. From Vince Bridgers. 22) When we disable router enabling in ipv6 we have to flush the cached routes explicitly, from Duan Jiong. 23) NBMA tunnels should not cache routes on the tunnel object because the key is variable, from Timo Teräs. 24) With stacked devices GRO information in skb->cb[] can be not setup properly, make sure it is in all code paths. From Eric Dumazet. 25) Really fix stacked vlan locking, multiple levels of nesting with intervening non-vlan devices are possible. From Vlad Yasevich. 26) Fallback ipip tunnel device's mtu is not setup properly, from Steffen Klassert. 27) The packet scheduler's tcindex filter can crash because we structure copy objects with list_head's inside, oops. From Cong Wang. 28) Fix CHECKSUM_COMPLETE handling for ipv6 GRE tunnels, from Eric Dumazet. 29) In some configurations 'itag' in __mkroute_input() can end up being used uninitialized because of how fib_validate_source() works. Fix it by explitly initializing itag to zero like all the other fib_validate_source() callers do, from Li RongQing" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (116 commits) batman: fix a bogus warning from batadv_is_on_batman_iface() ipv4: initialise the itag variable in __mkroute_input bonding: Send ALB learning packets using the right source bonding: Don't assume 802.1Q when sending alb learning packets. net: doc: Update references to skb->rxhash stmmac: Remove unbalanced clk_disable call ipv6: gro: fix CHECKSUM_COMPLETE support net_sched: fix an oops in tcindex filter can: peak_pci: prevent use after free at netdev removal ip_tunnel: Initialize the fallback device properly vlan: Fix build error wth vlan_get_encap_level() can: c_can: remove obsolete STRICT_FRAME_ORDERING Kconfig option MAINTAINERS: Pravin Shelar is Open vSwitch maintainer. bnx2x: Convert return 0 to return rc bonding: Fix alb mode to only use first level vlans. bonding: Fix stacked device detection in arp monitoring macvlan: Fix lockdep warnings with stacked macvlan devices vlan: Fix lockdep warning with stacked vlan devices. net: Allow for more then a single subclass for netif_addr_lock net: Find the nesting level of a given device by type. ...
2014-05-23net: filter: let unattached filters use sock_fprog_kernDaniel Borkmann4-6/+7
The sk_unattached_filter_create() API is used by BPF filters that are not directly attached or related to sockets, and are used in team, ptp, xt_bpf, cls_bpf, etc. As such all users do their own internal managment of obtaining filter blocks and thus already have them in kernel memory and set up before calling into sk_unattached_filter_create(). As a result, due to __user annotation in sock_fprog, sparse triggers false positives (incorrect type in assignment [different address space]) when filters are set up before passing them to sk_unattached_filter_create(). Therefore, let sk_unattached_filter_create() API use sock_fprog_kern to overcome this issue. Signed-off-by: Daniel Borkmann <[email protected]> Acked-by: Alexei Starovoitov <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2014-05-23net: filter: remove DL macroDaniel Borkmann1-94/+99
Lets get rid of this macro. After commit 5bcfedf06f7f ("net: filter: simplify label names from jump-table"), labels have become more readable due to omission of BPF_ prefix but at the same time more generic, so that things like `git grep -n` would not find them. As a middle path, lets get rid of the DL macro as it's not strictly needed and would otherwise just hide the full name. Signed-off-by: Daniel Borkmann <[email protected]> Acked-by: Alexei Starovoitov <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2014-05-23l2tp: Add support for zero IPv6 checksumsTom Herbert3-2/+18
Added new L2TP configuration options to allow TX and RX of zero checksums in IPv6. Default is not to use them. Signed-off-by: Tom Herbert <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2014-05-23net: Make enabling of zero UDP6 csums more restrictiveTom Herbert2-5/+23
RFC 6935 permits zero checksums to be used in IPv6 however this is recommended only for certain tunnel protocols, it does not make checksums completely optional like they are in IPv4. This patch restricts the use of IPv6 zero checksums that was previously intoduced. no_check6_tx and no_check6_rx have been added to control the use of checksums in UDP6 RX and TX path. The normal sk_no_check_{rx,tx} settings are not used (this avoids ambiguity when dealing with a dual stack socket). A helper function has been added (udp_set_no_check6) which can be called by tunnel impelmentations to all zero checksums (send on the socket, and accept them as valid). Signed-off-by: Tom Herbert <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2014-05-23net: Split sk_no_check into sk_no_check_{rx,tx}Tom Herbert10-15/+16
Define separate fields in the sock structure for configuring disabling checksums in both TX and RX-- sk_no_check_tx and sk_no_check_rx. The SO_NO_CHECK socket option only affects sk_no_check_tx. Also, removed UDP_CSUM_* defines since they are no longer necessary. Signed-off-by: Tom Herbert <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2014-05-23net: Eliminate no_check from protoswTom Herbert13-23/+0
It doesn't seem like an protocols are setting anything other than the default, and allowing to arbitrarily disable checksums for a whole protocol seems dangerous. This can be done on a per socket basis. Signed-off-by: Tom Herbert <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2014-05-23sunrpc: Remove sk_no_check settingTom Herbert1-3/+0
Setting sk_no_check to UDP_CSUM_NORCV seems to have no effect. Signed-off-by: Tom Herbert <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2014-05-23net-next:v4: Add support to configure SR-IOV VF minimum and maximum Tx rate ↵Sucheta Chakraborty1-6/+32
through ip tool. o min_tx_rate puts lower limit on the VF bandwidth. VF is guaranteed to have a bandwidth of at least this value. max_tx_rate puts cap on the VF bandwidth. VF can have a bandwidth of up to this value. o A new handler set_vf_rate for attr IFLA_VF_RATE has been introduced which takes 4 arguments: netdev, VF number, min_tx_rate, max_tx_rate o ndo_set_vf_rate replaces ndo_set_vf_tx_rate handler. o Drivers that currently implement ndo_set_vf_tx_rate should now call ndo_set_vf_rate instead and reject attempt to set a minimum bandwidth greater than 0 for IFLA_VF_TX_RATE when IFLA_VF_RATE is not yet implemented by driver. o If user enters only one of either min_tx_rate or max_tx_rate, then, userland should read back the other value from driver and set both for IFLA_VF_RATE. Drivers that have not yet implemented IFLA_VF_RATE should always return min_tx_rate as 0 when read from ip tool. o If both IFLA_VF_TX_RATE and IFLA_VF_RATE options are specified, then IFLA_VF_RATE should override. o Idea is to have consistent display of rate values to user. o Usage example: - ./ip link set p4p1 vf 0 rate 900 ./ip link show p4p1 32: p4p1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT qlen 1000 link/ether 00:0e:1e:08:b0:f0 brd ff:ff:ff:ff:ff:ff vf 0 MAC 3e:a0:ca:bd:ae:5a, tx rate 900 (Mbps), max_tx_rate 900Mbps vf 1 MAC f6:c6:7c:3f:3d:6c vf 2 MAC 56:32:43:98:d7:71 vf 3 MAC d6:be:c3:b5:85:ff vf 4 MAC ee:a9:9a:1e:19:14 vf 5 MAC 4a:d0:4c:07:52:18 vf 6 MAC 3a:76:44:93:62:f9 vf 7 MAC 82:e9:e7:e3:15:1a ./ip link set p4p1 vf 0 max_tx_rate 300 min_tx_rate 200 ./ip link show p4p1 32: p4p1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT qlen 1000 link/ether 00:0e:1e:08:b0:f0 brd ff:ff:ff:ff:ff:ff vf 0 MAC 3e:a0:ca:bd:ae:5a, tx rate 300 (Mbps), max_tx_rate 300Mbps, min_tx_rate 200Mbps vf 1 MAC f6:c6:7c:3f:3d:6c vf 2 MAC 56:32:43:98:d7:71 vf 3 MAC d6:be:c3:b5:85:ff vf 4 MAC ee:a9:9a:1e:19:14 vf 5 MAC 4a:d0:4c:07:52:18 vf 6 MAC 3a:76:44:93:62:f9 vf 7 MAC 82:e9:e7:e3:15:1a ./ip link set p4p1 vf 0 max_tx_rate 600 rate 300 ./ip link show p4p1 32: p4p1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT qlen 1000 link/ether 00:0e:1e:08:b0:f brd ff:ff:ff:ff:ff:ff vf 0 MAC 3e:a0:ca:bd:ae:5, tx rate 600 (Mbps), max_tx_rate 600Mbps, min_tx_rate 200Mbps vf 1 MAC f6:c6:7c:3f:3d:6c vf 2 MAC 56:32:43:98:d7:71 vf 3 MAC d6:be:c3:b5:85:ff vf 4 MAC ee:a9:9a:1e:19:14 vf 5 MAC 4a:d0:4c:07:52:18 vf 6 MAC 3a:76:44:93:62:f9 vf 7 MAC 82:e9:e7:e3:15:1a Signed-off-by: Sucheta Chakraborty <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2014-05-23Bluetooth: Clearly distinguish mgmt LTK type from authenticated propertyJohan Hedberg1-3/+16
On the mgmt level we have a key type parameter which currently accepts two possible values: 0x00 for unauthenticated and 0x01 for authenticated. However, in the internal struct smp_ltk representation we have an explicit "authenticated" boolean value. To make this distinction clear, add defines for the possible mgmt values and do conversion to and from the internal authenticated value. Signed-off-by: Johan Hedberg <[email protected]> Signed-off-by: Marcel Holtmann <[email protected]>
2014-05-23Merge branch 'master' of ↵John W. Linville1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
2014-05-22openvswitch: Simplify genetlink code.Pravin B Shelar1-95/+90
Following patch get rid of struct genl_family_and_ops which is redundant due to changes to struct genl_family. Signed-off-by: Kyle Mestery <[email protected]> Acked-by: Kyle Mestery <[email protected]> Signed-off-by: Pravin B Shelar <[email protected]>
2014-05-22openvswitch: Minimize ovs_flow_cmd_new|set critical sections.Jarno Rajahalme1-76/+116
Signed-off-by: Jarno Rajahalme <[email protected]> Signed-off-by: Pravin B Shelar <[email protected]>
2014-05-22openvswitch: Split ovs_flow_cmd_new_or_set().Jarno Rajahalme1-44/+116
Following patch will be easier to reason about with separate ovs_flow_cmd_new() and ovs_flow_cmd_set() functions. Signed-off-by: Jarno Rajahalme <[email protected]> Signed-off-by: Pravin B Shelar <[email protected]>
2014-05-22openvswitch: Minimize ovs_flow_cmd_del critical section.Jarno Rajahalme1-25/+28
ovs_flow_cmd_del() now allocates reply (if needed) after the flow has already been removed from the flow table. If the reply allocation fails, a netlink error is signaled with netlink_set_err(), as is already done in ovs_flow_cmd_new_or_set() in the similar situation. Signed-off-by: Jarno Rajahalme <[email protected]> Signed-off-by: Pravin B Shelar <[email protected]>
2014-05-22openvswitch: Reduce locking requirements.Jarno Rajahalme1-25/+29
Reduce and clarify locking requirements for ovs_flow_cmd_alloc_info(), ovs_flow_cmd_fill_info() and ovs_flow_cmd_build_info(). A datapath pointer is available only when holding a lock. Change ovs_flow_cmd_fill_info() and ovs_flow_cmd_build_info() to take a dp_ifindex directly, rather than a datapath pointer that is then (only) used to get the dp_ifindex. This is useful, since the dp_ifindex is available even when the datapath pointer is not, both before and after taking a lock, which makes further critical section reduction possible. Make ovs_flow_cmd_alloc_info() take an 'acts' argument instead a 'flow' pointer. This allows some future patches to do the allocation before acquiring the flow pointer. The locking requirements after this patch are: ovs_flow_cmd_alloc_info(): May be called without locking, must not be called while holding the RCU read lock (due to memory allocation). If 'acts' belong to a flow in the flow table, however, then the caller must hold ovs_mutex. ovs_flow_cmd_fill_info(): Either ovs_mutex or RCU read lock must be held. ovs_flow_cmd_build_info(): This calls both of the above, so the caller must hold ovs_mutex. Signed-off-by: Jarno Rajahalme <[email protected]> Signed-off-by: Pravin B Shelar <[email protected]>
2014-05-22openvswitch: Fix ovs_flow_stats_get/clear RCU dereference.Jarno Rajahalme2-7/+9
For ovs_flow_stats_get() using ovsl_dereference() was wrong, since flow dumps call this with RCU read lock. ovs_flow_stats_clear() is always called with ovs_mutex, so can use ovsl_dereference(). Also, make the ovs_flow_stats_get() 'flow' argument const to make later patches cleaner. Signed-off-by: Jarno Rajahalme <[email protected]> Signed-off-by: Pravin B Shelar <[email protected]>
2014-05-22openvswitch: Fix typo.Jarno Rajahalme1-1/+1
Incorrect struct name was confusing, even though otherwise inconsequental. Signed-off-by: Jarno Rajahalme <[email protected]> Signed-off-by: Pravin B Shelar <[email protected]>
2014-05-22openvswitch: Minimize dp and vport critical sections.Jarno Rajahalme1-108/+110
Move most memory allocations away from the ovs_mutex critical sections. vport allocations still happen while the lock is taken, as changing that would require major refactoring. Also, vports are created very rarely so it should not matter. Change ovs_dp_cmd_get() now only takes the rcu_read_lock(), rather than ovs_lock(), as nothing need to be changed. This was done by ovs_vport_cmd_get() already. Signed-off-by: Jarno Rajahalme <[email protected]> Signed-off-by: Pravin B Shelar <[email protected]>
2014-05-22openvswitch: Make flow mask removal symmetric.Jarno Rajahalme1-19/+25
Masks are inserted when flows are inserted to the table, so it is logical to correspondingly remove masks when flows are removed from the table, in ovs_flow_table_remove(). This allows ovs_flow_free() to be called without locking, which will be used by later patches. Signed-off-by: Jarno Rajahalme <[email protected]> Signed-off-by: Pravin B Shelar <[email protected]>
2014-05-22openvswitch: Build flow cmd netlink reply only if needed.Jarno Rajahalme1-22/+48
Use netlink_has_listeners() and NLM_F_ECHO flag to determine if a reply is needed or not for OVS_FLOW_CMD_NEW, OVS_FLOW_CMD_SET, or OVS_FLOW_CMD_DEL. Currently, OVS userspace does not request a reply for OVS_FLOW_CMD_NEW, but usually does for OVS_FLOW_CMD_DEL, as stats may have changed. Signed-off-by: Jarno Rajahalme <[email protected]> Signed-off-by: Pravin B Shelar <[email protected]>
2014-05-22openvswitch: Clarify locking.Jarno Rajahalme2-7/+9
Remove unnecessary locking from functions that are always called with appropriate locking. Signed-off-by: Jarno Rajahalme <[email protected]> Signed-off-by: Thomas Graf <[email protected]> Signed-off-by: Pravin B Shelar <[email protected]>
2014-05-22openvswitch: Avoid assigning a NULL pointer to flow actions.Jarno Rajahalme1-6/+8
Flow SET can accept an empty set of actions, with the intended semantics of leaving existing actions unmodified. This seems to have been brokin after OVS 1.7, as we have assigned the flow's actions pointer to NULL in this case, but we never check for the NULL pointer later on. This patch restores the intended behavior and documents it in the include/linux/openvswitch.h. Signed-off-by: Jarno Rajahalme <[email protected]> Signed-off-by: Pravin B Shelar <[email protected]>
2014-05-22openvswitch: Compact sw_flow_key.Jarno Rajahalme3-123/+62
Minimize padding in sw_flow_key and move 'tp' top the main struct. These changes simplify code when accessing the transport port numbers and the tcp flags, and makes the sw_flow_key 8 bytes smaller on 64-bit systems (128->120 bytes). These changes also make the keys for IPv4 packets to fit in one cache line. There is a valid concern for safety of packing the struct ovs_key_ipv4_tunnel, as it would be possible to take the address of the tun_id member as a __be64 * which could result in unaligned access in some systems. However: - sw_flow_key itself is 64-bit aligned, so the tun_id within is always 64-bit aligned. - We never make arrays of ovs_key_ipv4_tunnel (which would force every second tun_key to be misaligned). - We never take the address of the tun_id in to a __be64 *. - Whereever we use struct ovs_key_ipv4_tunnel outside the sw_flow_key, it is in stack (on tunnel input functions), where compiler has full control of the alignment. Signed-off-by: Jarno Rajahalme <[email protected]> Signed-off-by: Pravin B Shelar <[email protected]>
2014-05-22batman: fix a bogus warning from batadv_is_on_batman_iface()Cong Wang1-1/+1
batman tries to search dev->iflink to check if it's a batman interface, but ->iflink could be 0, which is not a valid ifindex. It should just avoid iflink == 0 case. Reported-by: Jet Chen <[email protected]> Tested-by: Jet Chen <[email protected]> Cc: David S. Miller <[email protected]> Cc: Steffen Klassert <[email protected]> Cc: Antonio Quartulli <[email protected]> Cc: Marek Lindner <[email protected]> Signed-off-by: Cong Wang <[email protected]> Signed-off-by: Cong Wang <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2014-05-22Merge branch 'master' of ↵David S. Miller5-130/+43
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next Steffen Klassert says: ==================== pull request (net-next): ipsec-next 2014-05-22 This is the last ipsec pull request before I leave for a three weeks vacation tomorrow. David, can you please take urgent ipsec patches directly into net/net-next during this time? I'll continue to run the ipsec/ipsec-next trees as soon as I'm back. 1) Simplify the xfrm audit handling, from Tetsuo Handa. 2) Codingstyle cleanup for xfrm_output, from abian Frederick. Please pull or let me know if there are problems. ==================== Signed-off-by: David S. Miller <[email protected]>
2014-05-22SUNRPC: track whether a request is coming from a loop-back interface.NeilBrown2-0/+18
If an incoming NFS request is coming from the local host, then nfsd will need to perform some special handling. So detect that possibility and make the source visible in rq_local. Signed-off-by: NeilBrown <[email protected]> Signed-off-by: J. Bruce Fields <[email protected]>
2014-05-22ipv4: initialise the itag variable in __mkroute_inputLi RongQing1-1/+1
the value of itag is a random value from stack, and may not be initiated by fib_validate_source, which called fib_combine_itag if CONFIG_IP_ROUTE_CLASSID is not set This will make the cached dst uncertainty Signed-off-by: Li RongQing <[email protected]> Acked-by: Alexei Starovoitov <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2014-05-22SUNRPC: Fix a module reference leak in svc_handle_xprtTrond Myklebust1-0/+2
If the accept() call fails, we need to put the module reference. Signed-off-by: Trond Myklebust <[email protected]> Cc: [email protected] Signed-off-by: J. Bruce Fields <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.