| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The following commands produce a backtrace and return an error but the xfrm
interface is created (in the wrong netns):
$ ip netns add foo
$ ip netns add bar
$ ip -n foo netns set bar 0
$ ip -n foo link add xfrmi0 link-netnsid 0 type xfrm dev lo if_id 23
RTNETLINK answers: Invalid argument
$ ip -n bar link ls xfrmi0
2: xfrmi0@lo: <NOARP,M-DOWN> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
link/none 00:00:00:00:00:00 brd 00:00:00:00:00:00
Here is the backtrace:
[ 79.879174] WARNING: CPU: 0 PID: 1178 at net/core/dev.c:8172 rollback_registered_many+0x86/0x3c1
[ 79.880260] Modules linked in: xfrm_interface nfsv3 nfs_acl auth_rpcgss nfsv4 nfs lockd grace sunrpc fscache button parport_pc parport serio_raw evdev pcspkr loop ext4 crc16 mbcache jbd2 crc32c_generic ide_cd_mod ide_gd_mod cdrom ata_$
eneric ata_piix libata scsi_mod 8139too piix psmouse i2c_piix4 ide_core 8139cp mii i2c_core floppy
[ 79.883698] CPU: 0 PID: 1178 Comm: ip Not tainted 5.2.0-rc6+ #106
[ 79.884462] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014
[ 79.885447] RIP: 0010:rollback_registered_many+0x86/0x3c1
[ 79.886120] Code: 01 e8 d7 7d c6 ff 0f 0b 48 8b 45 00 4c 8b 20 48 8d 58 90 49 83 ec 70 48 8d 7b 70 48 39 ef 74 44 8a 83 d0 04 00 00 84 c0 75 1f <0f> 0b e8 61 cd ff ff 48 b8 00 01 00 00 00 00 ad de 48 89 43 70 66
[ 79.888667] RSP: 0018:ffffc900015ab740 EFLAGS: 00010246
[ 79.889339] RAX: ffff8882353e5700 RBX: ffff8882353e56a0 RCX: ffff8882353e5710
[ 79.890174] RDX: ffffc900015ab7e0 RSI: ffffc900015ab7e0 RDI: ffff8882353e5710
[ 79.891029] RBP: ffffc900015ab7e0 R08: ffffc900015ab7e0 R09: ffffc900015ab7e0
[ 79.891866] R10: ffffc900015ab7a0 R11: ffffffff82233fec R12: ffffc900015ab770
[ 79.892728] R13: ffffffff81eb7ec0 R14: ffff88822ed6cf00 R15: 00000000ffffffea
[ 79.893557] FS: 00007ff350f31740(0000) GS:ffff888237a00000(0000) knlGS:0000000000000000
[ 79.894581] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 79.895317] CR2: 00000000006c8580 CR3: 000000022c272000 CR4: 00000000000006f0
[ 79.896137] Call Trace:
[ 79.896464] unregister_netdevice_many+0x12/0x6c
[ 79.896998] __rtnl_newlink+0x6e2/0x73b
[ 79.897446] ? __kmalloc_node_track_caller+0x15e/0x185
[ 79.898039] ? pskb_expand_head+0x5f/0x1fe
[ 79.898556] ? stack_access_ok+0xd/0x2c
[ 79.899009] ? deref_stack_reg+0x12/0x20
[ 79.899462] ? stack_access_ok+0xd/0x2c
[ 79.899927] ? stack_access_ok+0xd/0x2c
[ 79.900404] ? __module_text_address+0x9/0x4f
[ 79.900910] ? is_bpf_text_address+0x5/0xc
[ 79.901390] ? kernel_text_address+0x67/0x7b
[ 79.901884] ? __kernel_text_address+0x1a/0x25
[ 79.902397] ? unwind_get_return_address+0x12/0x23
[ 79.903122] ? __cmpxchg_double_slab.isra.37+0x46/0x77
[ 79.903772] rtnl_newlink+0x43/0x56
[ 79.904217] rtnetlink_rcv_msg+0x200/0x24c
In fact, each time a xfrm interface was created, a netdev was allocated
by __rtnl_newlink()/rtnl_create_link() and then another one by
xfrmi_newlink()/xfrmi_create(). Only the second one was registered, it's
why the previous commands produce a backtrace: dev_change_net_namespace()
was called on a netdev with reg_state set to NETREG_UNINITIALIZED (the
first one).
CC: Lorenzo Colitti <[email protected]>
CC: Benedict Wong <[email protected]>
CC: Steffen Klassert <[email protected]>
CC: Shannon Nelson <[email protected]>
CC: Antony Antony <[email protected]>
CC: Eyal Birger <[email protected]>
Fixes: f203b76d7809 ("xfrm: Add virtual xfrm interfaces")
Reported-by: Julien Floret <[email protected]>
Signed-off-by: Nicolas Dichtel <[email protected]>
Signed-off-by: Steffen Klassert <[email protected]>
|
|
syzbot reported following spat:
BUG: KASAN: use-after-free in __write_once_size include/linux/compiler.h:221
BUG: KASAN: use-after-free in hlist_del_rcu include/linux/rculist.h:455
BUG: KASAN: use-after-free in xfrm_hash_rebuild+0xa0d/0x1000 net/xfrm/xfrm_policy.c:1318
Write of size 8 at addr ffff888095e79c00 by task kworker/1:3/8066
Workqueue: events xfrm_hash_rebuild
Call Trace:
__write_once_size include/linux/compiler.h:221 [inline]
hlist_del_rcu include/linux/rculist.h:455 [inline]
xfrm_hash_rebuild+0xa0d/0x1000 net/xfrm/xfrm_policy.c:1318
process_one_work+0x814/0x1130 kernel/workqueue.c:2269
Allocated by task 8064:
__kmalloc+0x23c/0x310 mm/slab.c:3669
kzalloc include/linux/slab.h:742 [inline]
xfrm_hash_alloc+0x38/0xe0 net/xfrm/xfrm_hash.c:21
xfrm_policy_init net/xfrm/xfrm_policy.c:4036 [inline]
xfrm_net_init+0x269/0xd60 net/xfrm/xfrm_policy.c:4120
ops_init+0x336/0x420 net/core/net_namespace.c:130
setup_net+0x212/0x690 net/core/net_namespace.c:316
The faulting address is the address of the old chain head,
free'd by xfrm_hash_resize().
In xfrm_hash_rehash(), chain heads get re-initialized without
any hlist_del_rcu:
for (i = hmask; i >= 0; i--)
INIT_HLIST_HEAD(odst + i);
Then, hlist_del_rcu() gets called on the about to-be-reinserted policy
when iterating the per-net list of policies.
hlist_del_rcu() will then make chain->first be nonzero again:
static inline void __hlist_del(struct hlist_node *n)
{
struct hlist_node *next = n->next; // address of next element in list
struct hlist_node **pprev = n->pprev;// location of previous elem, this
// can point at chain->first
WRITE_ONCE(*pprev, next); // chain->first points to next elem
if (next)
next->pprev = pprev;
Then, when we walk chainlist to find insertion point, we may find a
non-empty list even though we're supposedly reinserting the first
policy to an empty chain.
To fix this first unlink all exact and inexact policies instead of
zeroing the list heads.
Add the commands equivalent to the syzbot reproducer to xfrm_policy.sh,
without fix KASAN catches the corruption as it happens, SLUB poisoning
detects it a bit later.
Reported-by: [email protected]
Fixes: 1548bc4e0512 ("xfrm: policy: delete inexact policies from inexact list on hash rebuild")
Signed-off-by: Florian Westphal <[email protected]>
Signed-off-by: Steffen Klassert <[email protected]>
|
|
Fix minimum encryption key size check so that HCI_MIN_ENC_KEY_SIZE is
also allowed as stated in the comment.
This bug caused connection problems with devices having maximum
encryption key size of 7 octets (56-bit).
Fixes: 693cd8ce3f88 ("Bluetooth: Fix regression with minimum encryption key size alignment")
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=203997
Signed-off-by: Matias Karhumaa <[email protected]>
Cc: [email protected]
Signed-off-by: Marcel Holtmann <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Both tipc_udp_enable and tipc_udp_disable are called under rtnl_lock,
ub->ubsock could never be NULL in tipc_udp_disable and cleanup_bearer,
so remove the check.
Also remove the one in tipc_udp_enable by adding "free" label.
Signed-off-by: Xin Long <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
In commit ee28906fd7a1 ("ipv4: Dump route exceptions if requested") I
added a counter of per-node dumped routes (including actual routes and
exceptions), analogous to the existing counter for dumped nodes. Dumping
exceptions means we need to also keep track of how many routes are dumped
for each node: this would be just one route per node, without exceptions.
When netlink strict checking is not enabled, we dump both routes and
exceptions at the same time: the RTM_F_CLONED flag is not used as a
filter. In this case, the per-node counter 'i_fa' is incremented by one
to track the single dumped route, then also incremented by one for each
exception dumped, and then stored as netlink callback argument as skip
counter, 's_fa', to be used when a partial dump operation restarts.
The per-node counter needs to be increased by one also when we skip a
route (exception) due to a previous non-zero skip counter, because it
needs to match the existing skip counter, if we are dumping both routes
and exceptions. I missed this, and only incremented the counter, for
regular routes, if the previous skip counter was zero. This means that,
in case of a mixed dump, partial dump operations after the first one
will start with a mismatching skip counter value, one less than expected.
This means in turn that the first exception for a given node is skipped
every time a partial dump operation restarts, if netlink strict checking
is not enabled (iproute < 5.0).
It turns out I didn't repeat the test in its final version, commit
de755a85130e ("selftests: pmtu: Introduce list_flush_ipv4_exception test
case"), which also counts the number of route exceptions returned, with
iproute2 versions < 5.0 -- I was instead using the equivalent of the IPv6
test as it was before commit b964641e9925 ("selftests: pmtu: Make
list_flush_ipv6_exception test more demanding").
Always increment the per-node counter by one if we previously dumped
a regular route, so that it matches the current skip counter.
Fixes: ee28906fd7a1 ("ipv4: Dump route exceptions if requested")
Signed-off-by: Stefano Brivio <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Dereference wr->next /before/ the memory backing wr has been
released. This issue was found by code inspection. It is not
expected to be a significant problem because it is in an error
path that is almost never executed.
Fixes: 7c8d9e7c8863 ("xprtrdma: Move Receive posting to ... ")
Signed-off-by: Chuck Lever <[email protected]>
Signed-off-by: Anna Schumaker <[email protected]>
|
|
If sendmsg() or sendmmsg() is called on a connected socket that hasn't had
bind() called on it, then an oops will occur when the kernel tries to
connect the call because no local endpoint has been allocated.
Fix this by implicitly binding the socket if it is in the
RXRPC_CLIENT_UNBOUND state, just like it does for the RXRPC_UNBOUND state.
Further, the state should be transitioned to RXRPC_CLIENT_BOUND after this
to prevent further attempts to bind it.
This can be tested with:
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <sys/socket.h>
#include <arpa/inet.h>
#include <linux/rxrpc.h>
static const unsigned char inet6_addr[16] = {
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, -1, -1, 0xac, 0x14, 0x14, 0xaa
};
int main(void)
{
struct sockaddr_rxrpc srx;
struct cmsghdr *cm;
struct msghdr msg;
unsigned char control[16];
int fd;
memset(&srx, 0, sizeof(srx));
srx.srx_family = 0x21;
srx.srx_service = 0;
srx.transport_type = AF_INET;
srx.transport_len = 0x1c;
srx.transport.sin6.sin6_family = AF_INET6;
srx.transport.sin6.sin6_port = htons(0x4e22);
srx.transport.sin6.sin6_flowinfo = htons(0x4e22);
srx.transport.sin6.sin6_scope_id = htons(0xaa3b);
memcpy(&srx.transport.sin6.sin6_addr, inet6_addr, 16);
cm = (struct cmsghdr *)control;
cm->cmsg_len = CMSG_LEN(sizeof(unsigned long));
cm->cmsg_level = SOL_RXRPC;
cm->cmsg_type = RXRPC_USER_CALL_ID;
*(unsigned long *)CMSG_DATA(cm) = 0;
msg.msg_name = NULL;
msg.msg_namelen = 0;
msg.msg_iov = NULL;
msg.msg_iovlen = 0;
msg.msg_control = control;
msg.msg_controllen = cm->cmsg_len;
msg.msg_flags = 0;
fd = socket(AF_RXRPC, SOCK_DGRAM, AF_INET);
connect(fd, (struct sockaddr *)&srx, sizeof(srx));
sendmsg(fd, &msg, 0);
return 0;
}
Leading to the following oops:
BUG: kernel NULL pointer dereference, address: 0000000000000018
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
...
RIP: 0010:rxrpc_connect_call+0x42/0xa01
...
Call Trace:
? mark_held_locks+0x47/0x59
? __local_bh_enable_ip+0xb6/0xba
rxrpc_new_client_call+0x3b1/0x762
? rxrpc_do_sendmsg+0x3c0/0x92e
rxrpc_do_sendmsg+0x3c0/0x92e
rxrpc_sendmsg+0x16b/0x1b5
sock_sendmsg+0x2d/0x39
___sys_sendmsg+0x1a4/0x22a
? release_sock+0x19/0x9e
? reacquire_held_locks+0x136/0x160
? release_sock+0x19/0x9e
? find_held_lock+0x2b/0x6e
? __lock_acquire+0x268/0xf73
? rxrpc_connect+0xdd/0xe4
? __local_bh_enable_ip+0xb6/0xba
__sys_sendmsg+0x5e/0x94
do_syscall_64+0x7d/0x1bf
entry_SYSCALL_64_after_hwframe+0x49/0xbe
Fixes: 2341e0775747 ("rxrpc: Simplify connect() implementation and simplify sendmsg() op")
Reported-by: [email protected]
Signed-off-by: David Howells <[email protected]>
Reviewed-by: Marc Dionne <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
With gcc 4.1:
net/rxrpc/output.c: In function ‘rxrpc_send_data_packet’:
net/rxrpc/output.c:338: warning: ‘ret’ may be used uninitialized in this function
Indeed, if the first jump to the send_fragmentable label is made, and
the address family is not handled in the switch() statement, ret will be
used uninitialized.
Fix this by BUG()'ing as is done in other places in rxrpc where internal
support for future address families will need adding. It should not be
possible to reach this normally as the address families are checked
up-front.
Fixes: 5a924b8951f835b5 ("rxrpc: Don't store the rxrpc header in the Tx queue sk_buffs")
Reported-by: Geert Uytterhoeven <[email protected]>
Signed-off-by: David Howells <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Don't cache eth dest pointer before calling pskb_may_pull.
Fixes: cf0f02d04a83 ("[BRIDGE]: use llc for receiving STP packets")
Signed-off-by: Nikolay Aleksandrov <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
We would cache ether dst pointer on input in br_handle_frame_finish but
after the neigh suppress code that could lead to a stale pointer since
both ipv4 and ipv6 suppress code do pskb_may_pull. This means we have to
always reload it after the suppress code so there's no point in having
it cached just retrieve it directly.
Fixes: 057658cb33fbf ("bridge: suppress arp pkts on BR_NEIGH_SUPPRESS ports")
Fixes: ed842faeb2bd ("bridge: suppress nd pkts on BR_NEIGH_SUPPRESS ports")
Signed-off-by: Nikolay Aleksandrov <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
We get a pointer to the ipv6 hdr in br_ip6_multicast_query but we may
call pskb_may_pull afterwards and end up using a stale pointer.
So use the header directly, it's just 1 place where it's needed.
Fixes: 08b202b67264 ("bridge br_multicast: IPv6 MLD support.")
Signed-off-by: Nikolay Aleksandrov <[email protected]>
Tested-by: Martin Weinelt <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
We take a pointer to grec prior to calling pskb_may_pull and use it
afterwards to get nsrcs so record nsrcs before the pull when handling
igmp3 and we get a pointer to nsrcs and call pskb_may_pull when handling
mld2 which again could lead to reading 2 bytes out-of-bounds.
==================================================================
BUG: KASAN: use-after-free in br_multicast_rcv+0x480c/0x4ad0 [bridge]
Read of size 2 at addr ffff8880421302b4 by task ksoftirqd/1/16
CPU: 1 PID: 16 Comm: ksoftirqd/1 Tainted: G OE 5.2.0-rc6+ #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014
Call Trace:
dump_stack+0x71/0xab
print_address_description+0x6a/0x280
? br_multicast_rcv+0x480c/0x4ad0 [bridge]
__kasan_report+0x152/0x1aa
? br_multicast_rcv+0x480c/0x4ad0 [bridge]
? br_multicast_rcv+0x480c/0x4ad0 [bridge]
kasan_report+0xe/0x20
br_multicast_rcv+0x480c/0x4ad0 [bridge]
? br_multicast_disable_port+0x150/0x150 [bridge]
? ktime_get_with_offset+0xb4/0x150
? __kasan_kmalloc.constprop.6+0xa6/0xf0
? __netif_receive_skb+0x1b0/0x1b0
? br_fdb_update+0x10e/0x6e0 [bridge]
? br_handle_frame_finish+0x3c6/0x11d0 [bridge]
br_handle_frame_finish+0x3c6/0x11d0 [bridge]
? br_pass_frame_up+0x3a0/0x3a0 [bridge]
? virtnet_probe+0x1c80/0x1c80 [virtio_net]
br_handle_frame+0x731/0xd90 [bridge]
? select_idle_sibling+0x25/0x7d0
? br_handle_frame_finish+0x11d0/0x11d0 [bridge]
__netif_receive_skb_core+0xced/0x2d70
? virtqueue_get_buf_ctx+0x230/0x1130 [virtio_ring]
? do_xdp_generic+0x20/0x20
? virtqueue_napi_complete+0x39/0x70 [virtio_net]
? virtnet_poll+0x94d/0xc78 [virtio_net]
? receive_buf+0x5120/0x5120 [virtio_net]
? __netif_receive_skb_one_core+0x97/0x1d0
__netif_receive_skb_one_core+0x97/0x1d0
? __netif_receive_skb_core+0x2d70/0x2d70
? _raw_write_trylock+0x100/0x100
? __queue_work+0x41e/0xbe0
process_backlog+0x19c/0x650
? _raw_read_lock_irq+0x40/0x40
net_rx_action+0x71e/0xbc0
? __switch_to_asm+0x40/0x70
? napi_complete_done+0x360/0x360
? __switch_to_asm+0x34/0x70
? __switch_to_asm+0x40/0x70
? __schedule+0x85e/0x14d0
__do_softirq+0x1db/0x5f9
? takeover_tasklets+0x5f0/0x5f0
run_ksoftirqd+0x26/0x40
smpboot_thread_fn+0x443/0x680
? sort_range+0x20/0x20
? schedule+0x94/0x210
? __kthread_parkme+0x78/0xf0
? sort_range+0x20/0x20
kthread+0x2ae/0x3a0
? kthread_create_worker_on_cpu+0xc0/0xc0
ret_from_fork+0x35/0x40
The buggy address belongs to the page:
page:ffffea0001084c00 refcount:0 mapcount:-128 mapping:0000000000000000 index:0x0
flags: 0xffffc000000000()
raw: 00ffffc000000000 ffffea0000cfca08 ffffea0001098608 0000000000000000
raw: 0000000000000000 0000000000000003 00000000ffffff7f 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff888042130180: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ffff888042130200: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> ffff888042130280: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
^
ffff888042130300: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ffff888042130380: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
==================================================================
Disabling lock debugging due to kernel taint
Fixes: bc8c20acaea1 ("bridge: multicast: treat igmpv3 report with INCLUDE and no sources as a leave")
Reported-by: Martin Weinelt <[email protected]>
Signed-off-by: Nikolay Aleksandrov <[email protected]>
Tested-by: Martin Weinelt <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Fixes: 30846090a746 ("xfrm: policy: add sequence count to sync with hash resize")
Cc: Florian Westphal <[email protected]>
Cc: Steffen Klassert <[email protected]>
Signed-off-by: Cong Wang <[email protected]>
Signed-off-by: Steffen Klassert <[email protected]>
|
|
Use blackhole_netdev instead of 'lo' device with lower MTU when marking
dst "dead".
Signed-off-by: Mahesh Bandewar <[email protected]>
Tested-by: Michael Chan <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Commit 86029d10af18 ("tls: zero the crypto information from tls_context
before freeing") added memzero_explicit() calls to clear the key material
before freeing struct tls_context, but it missed tls_device.c has its
own way of freeing this structure. Replace the missing free.
Fixes: 86029d10af18 ("tls: zero the crypto information from tls_context before freeing")
Signed-off-by: Jakub Kicinski <[email protected]>
Reviewed-by: Dirk van der Merwe <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Neither drivers nor the tls offload code currently supports TLS
version 1.3. Check the TLS version when installing connection
state. TLS 1.3 will just fallback to the kernel crypto for now.
Fixes: 130b392c6cd6 ("net: tls: Add tls 1.3 support")
Signed-off-by: Jakub Kicinski <[email protected]>
Reviewed-by: Dirk van der Merwe <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Add get_fill_size() routine used to calculate the action size
when building a batch of events.
Signed-off-by: Roman Mashak <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Similarly, other callers of idr_get_next_ul() suffer the same
overflow bug as they don't handle it properly either.
Introduce idr_for_each_entry_continue_ul() to help these callers
iterate from a given ID.
cls_flower needs more care here because it still has overflow when
does arg->cookie++, we have to fold its nested loops into one
and remove the arg->cookie++.
Fixes: 01683a146999 ("net: sched: refactor flower walk to iterate over idr")
Fixes: 12d6066c3b29 ("net/mlx5: Add flow counters idr")
Reported-by: Li Shuang <[email protected]>
Cc: Davide Caratti <[email protected]>
Cc: Vlad Buslov <[email protected]>
Cc: Chris Mi <[email protected]>
Cc: Matthew Wilcox <[email protected]>
Signed-off-by: Cong Wang <[email protected]>
Tested-by: Davide Caratti <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
idr_for_each_entry_ul() is buggy as it can't handle overflow
case correctly. When we have an ID == UINT_MAX, it becomes an
infinite loop. This happens when running on 32-bit CPU where
unsigned long has the same size with unsigned int.
There is no better way to fix this than casting it to a larger
integer, but we can't just 64 bit integer on 32 bit CPU. Instead
we could just use an additional integer to help us to detect this
overflow case, that is, adding a new parameter to this macro.
Fortunately tc action is its only user right now.
Fixes: 65a206c01e8e ("net/sched: Change act_api and act_xxx modules to use IDR")
Reported-by: Li Shuang <[email protected]>
Tested-by: Davide Caratti <[email protected]>
Cc: Matthew Wilcox <[email protected]>
Cc: Chris Mi <[email protected]>
Signed-off-by: Cong Wang <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
The macro TIPC_BC_RETR_LIM is always used in combination with 'jiffies',
so we can just as well perform the addition in the macro itself. This
way, we get a few shorter code lines and one less line break.
Signed-off-by: Jon Maloy <[email protected]>
Acked-by: Ying Xue <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
This patch moves the flush of works after vdev->config->del_vqs(vdev),
because we need to be sure that no workers run before to free the
'vsock' object.
Since we stopped the workers using the [tx|rx|event]_run flags,
we are sure no one is accessing the device while we are calling
vdev->config->reset(vdev), so we can safely move the workers' flush.
Before the vdev->config->del_vqs(vdev), workers can be scheduled
by VQ callbacks, so we must flush them after del_vqs(), to avoid
use-after-free of 'vsock' object.
Suggested-by: Michael S. Tsirkin <[email protected]>
Signed-off-by: Stefano Garzarella <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Before to call vdev->config->reset(vdev) we need to be sure that
no one is accessing the device, for this reason, we add new variables
in the struct virtio_vsock to stop the workers during the .remove().
This patch also add few comments before vdev->config->reset(vdev)
and vdev->config->del_vqs(vdev).
Suggested-by: Stefan Hajnoczi <[email protected]>
Suggested-by: Michael S. Tsirkin <[email protected]>
Signed-off-by: Stefano Garzarella <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Some callbacks used by the upper layers can run while we are in the
.remove(). A potential use-after-free can happen, because we free
the_virtio_vsock without knowing if the callbacks are over or not.
To solve this issue we move the assignment of the_virtio_vsock at the
end of .probe(), when we finished all the initialization, and at the
beginning of .remove(), before to release resources.
For the same reason, we do the same also for the vdev->priv.
We use RCU to be sure that all callbacks that use the_virtio_vsock
ended before freeing it. This is not required for callbacks that
use vdev->priv, because after the vdev->config->del_vqs() we are sure
that they are ended and will no longer be invoked.
We also take the mutex during the .remove() to avoid that .probe() can
run while we are resetting the device.
Signed-off-by: Stefano Garzarella <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
/proc/sys/net/ipv6/flowlabel_reflect assumes written value to be in the
range of 0 to 3. Use proc_dointvec_minmax instead of proc_dointvec.
Fixes: 323a53c41292 ("ipv6: tcp: enable flowlabel reflection in some RST packets")
Signed-off-by: Eiichi Tsukata <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
When user has configured a large number of virtual netdev, such
as 4K vlans, the carrier on/off operation of the real netdev
will also cause it's virtual netdev's link state to be processed
in linkwatch. Currently, the processing is done in a work queue,
which may cause rtnl locking starvation problem and worker
starvation problem for other work queue, such as irqfd_inject wq.
This patch releases the cpu when link watch worker has processed
a fixed number of netdev' link watch event, and schedule the
work queue again when there is still link watch event remaining.
Signed-off-by: Yunsheng Lin <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
It allocates the extended area for outbound streams only on sendmsg
calls, if they are not yet allocated. When using the priority
stream scheduler, this initialization may imply into a subsequent
allocation, which may fail. In this case, it was aborting the stream
scheduler initialization but leaving the ->ext pointer (allocated) in
there, thus in a partially initialized state. On a subsequent call to
sendmsg, it would notice the ->ext pointer in there, and trip on
uninitialized stuff when trying to schedule the data chunk.
The fix is undo the ->ext initialization if the stream scheduler
initialization fails and avoid the partially initialized state.
Although syzkaller bisected this to commit 4ff40b86262b ("sctp: set
chunk transport correctly when it's a new asoc"), this bug was actually
introduced on the commit I marked below.
Reported-by: [email protected]
Fixes: 5bbbbe32a431 ("sctp: introduce stream scheduler foundations")
Tested-by: Xin Long <[email protected]>
Signed-off-by: Marcelo Ricardo Leitner <[email protected]>
Acked-by: Neil Horman <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
When the skb is associated with a new sock, just assigning
it to skb->sk is not sufficient, we have to set its destructor
to free the sock properly too.
Reported-by: [email protected]
Signed-off-by: Cong Wang <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Avoid the situation where an IPV6 only flag is applied to an IPv4 address:
# ip addr add 192.0.2.1/24 dev dummy0 nodad home mngtmpaddr noprefixroute
# ip -4 addr show dev dummy0
2: dummy0: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default qlen 1000
inet 192.0.2.1/24 scope global noprefixroute dummy0
valid_lft forever preferred_lft forever
Or worse, by sending a malicious netlink command:
# ip -4 addr show dev dummy0
2: dummy0: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default qlen 1000
inet 192.0.2.1/24 scope global nodad optimistic dadfailed home tentative mngtmpaddr noprefixroute stable-privacy dummy0
valid_lft forever preferred_lft forever
Signed-off-by: Matteo Croce <[email protected]>
Reviewed-by: David Ahern <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Extend flowlabel_reflect bitmask to allow conditional
reflection of incoming flowlabels in echo replies.
Note this has precedence against auto flowlabels.
Add flowlabel_reflect enum to replace hard coded
values.
Signed-off-by: Eric Dumazet <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
esp4_get_mtu and esp6_get_mtu are exactly the same, the only difference
is a single sizeof() (ipv4 vs. ipv6 header).
Merge both into xfrm_state_mtu() and remove the indirection.
Signed-off-by: Florian Westphal <[email protected]>
Signed-off-by: Steffen Klassert <[email protected]>
|
|
Skbs may have their checksum value populated by HW. If this is a checksum
calculated over the entire packet then the CHECKSUM_COMPLETE field is
marked. Changes to the data pointer on the skb throughout the network
stack still try to maintain this complete csum value if it is required
through functions such as skb_postpush_rcsum.
The MPLS actions in Open vSwitch modify a CHECKSUM_COMPLETE value when
changes are made to packet data without a push or a pull. This occurs when
the ethertype of the MAC header is changed or when MPLS lse fields are
modified.
The modification is carried out using the csum_partial function to get the
csum of a buffer and add it into the larger checksum. The buffer is an
inversion of the data to be removed followed by the new data. Because the
csum is calculated over 16 bits and these values align with 16 bits, the
effect is the removal of the old value from the CHECKSUM_COMPLETE and
addition of the new value.
However, the csum fed into the function and the outcome of the
calculation are also inverted. This would only make sense if it was the
new value rather than the old that was inverted in the input buffer.
Fix the issue by removing the bit inverts in the csum_partial calculation.
The bug was verified and the fix tested by comparing the folded value of
the updated CHECKSUM_COMPLETE value with the folded value of a full
software checksum calculation (reset skb->csum to 0 and run
skb_checksum_complete(skb)). Prior to the fix the outcomes differed but
after they produce the same result.
Fixes: 25cd9ba0abc0 ("openvswitch: Add basic MPLS support to kernel")
Fixes: bc7cc5999fd3 ("openvswitch: update checksum in {push,pop}_mpls")
Signed-off-by: John Hurley <[email protected]>
Reviewed-by: Jakub Kicinski <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Acked-by: Pravin B Shelar <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5e-updates-2019-06-28
This series adds some misc updates for mlx5e driver
1) Allow adding the same mac more than once in MPFS table
2) Move to HW checksumming advertising
3) Report netdevice MPLS features
4) Correct physical port name of the PF representor
5) Reduce stack usage in mlx5_eswitch_termtbl_create
6) Refresh TIR improvement for representors
7) Expose same physical switch_id for all representors
====================
Signed-off-by: David S. Miller <[email protected]>
|
|
im->tomb and/or im->sources might not be NULL, but we
currently overwrite their values blindly.
Using swap() will make sure the following call to kfree_pmc(pmc)
will properly free the psf structures.
Tested with the C repro provided by syzbot, which basically does :
socket(PF_INET, SOCK_DGRAM, IPPROTO_IP) = 3
setsockopt(3, SOL_IP, IP_ADD_MEMBERSHIP, "\340\0\0\2\177\0\0\1\0\0\0\0", 12) = 0
ioctl(3, SIOCSIFFLAGS, {ifr_name="lo", ifr_flags=0}) = 0
setsockopt(3, SOL_IP, IP_MSFILTER, "\340\0\0\2\177\0\0\1\1\0\0\0\1\0\0\0\377\377\377\377", 20) = 0
ioctl(3, SIOCSIFFLAGS, {ifr_name="lo", ifr_flags=IFF_UP}) = 0
exit_group(0) = ?
BUG: memory leak
unreferenced object 0xffff88811450f140 (size 64):
comm "softirq", pid 0, jiffies 4294942448 (age 32.070s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 ff ff ff ff 00 00 00 00 ................
00 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00 ................
backtrace:
[<00000000c7bad083>] kmemleak_alloc_recursive include/linux/kmemleak.h:43 [inline]
[<00000000c7bad083>] slab_post_alloc_hook mm/slab.h:439 [inline]
[<00000000c7bad083>] slab_alloc mm/slab.c:3326 [inline]
[<00000000c7bad083>] kmem_cache_alloc_trace+0x13d/0x280 mm/slab.c:3553
[<000000009acc4151>] kmalloc include/linux/slab.h:547 [inline]
[<000000009acc4151>] kzalloc include/linux/slab.h:742 [inline]
[<000000009acc4151>] ip_mc_add1_src net/ipv4/igmp.c:1976 [inline]
[<000000009acc4151>] ip_mc_add_src+0x36b/0x400 net/ipv4/igmp.c:2100
[<000000004ac14566>] ip_mc_msfilter+0x22d/0x310 net/ipv4/igmp.c:2484
[<0000000052d8f995>] do_ip_setsockopt.isra.0+0x1795/0x1930 net/ipv4/ip_sockglue.c:959
[<000000004ee1e21f>] ip_setsockopt+0x3b/0xb0 net/ipv4/ip_sockglue.c:1248
[<0000000066cdfe74>] udp_setsockopt+0x4e/0x90 net/ipv4/udp.c:2618
[<000000009383a786>] sock_common_setsockopt+0x38/0x50 net/core/sock.c:3126
[<00000000d8ac0c94>] __sys_setsockopt+0x98/0x120 net/socket.c:2072
[<000000001b1e9666>] __do_sys_setsockopt net/socket.c:2083 [inline]
[<000000001b1e9666>] __se_sys_setsockopt net/socket.c:2080 [inline]
[<000000001b1e9666>] __x64_sys_setsockopt+0x26/0x30 net/socket.c:2080
[<00000000420d395e>] do_syscall_64+0x76/0x1a0 arch/x86/entry/common.c:301
[<000000007fd83a4b>] entry_SYSCALL_64_after_hwframe+0x44/0xa9
Fixes: 24803f38a5c0 ("igmp: do not remove igmp souce list info when set link down")
Signed-off-by: Eric Dumazet <[email protected]>
Cc: Hangbin Liu <[email protected]>
Reported-by: [email protected]
Signed-off-by: David S. Miller <[email protected]>
|
|
Allow em_ipt to use addrtype for matching. Restrict the use only to
revision 1 which has IPv6 support. Since it's a NFPROTO_UNSPEC xt match
we use the user-specified nfproto for matching, in case it's unspecified
both v4/v6 will be matched by the rule.
v2: no changes, was patch 5 in v1
Signed-off-by: Nikolay Aleksandrov <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
If we dump NFPROTO_UNSPEC as nfproto user-space libxtables can't handle
it and would exit with an error like:
"libxtables: unhandled NFPROTO in xtables_set_nfproto"
In order to avoid the error return the user-specified nfproto. If we
don't record it then the match family is used which can be
NFPROTO_UNSPEC. Even if we add support to mask NFPROTO_UNSPEC in
iproute2 we have to be compatible with older versions which would be
also be allowed to add NFPROTO_UNSPEC matches (e.g. addrtype after the
last patch).
v3: don't use the user nfproto for matching, only for dumping the rule,
also don't allow the nfproto to be unspecified (explained above)
v2: adjust changes to missing patch, was patch 04 in v1
Signed-off-by: Nikolay Aleksandrov <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Set the family based on the packet if it's unspecified otherwise
protocol-neutral matches will have wrong information (e.g. NFPROTO_UNSPEC).
In preparation for using NFPROTO_UNSPEC xt matches.
v2: set the nfproto only when unspecified
Suggested-by: Eyal Birger <[email protected]>
Signed-off-by: Nikolay Aleksandrov <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Restrict matching only to ip/ipv6 traffic and make sure we can use the
headers, otherwise matches will be attempted on any protocol which can
be unexpected by the xt matches. Currently policy supports only ipv4/6.
Signed-off-by: Nikolay Aleksandrov <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
netfilter did not expect that skb_dst_force() can cause skb to lose its
dst entry.
I got a bug report with a skb->dst NULL dereference in netfilter
output path. The backtrace contains nf_reinject(), so the dst might have
been cleared when skb got queued to userspace.
Other users were fixed via
if (skb_dst(skb)) {
skb_dst_force(skb);
if (!skb_dst(skb))
goto handle_err;
}
But I think its preferable to make the 'dst might be cleared' part
of the function explicit.
In netfilter case, skb with a null dst is expected when queueing in
prerouting hook, so drop skb for the other hooks.
v2:
v1 of this patch returned true in case skb had no dst entry.
Eric said:
Say if we have two skb_dst_force() calls for some reason
on the same skb, only the first one will return false.
This now returns false even when skb had no dst, as per Erics
suggestion, so callers might need to check skb_dst() first before
skb_dst_force().
Signed-off-by: Florian Westphal <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Now when sctp_connect() is called with a wrong sa_family, it binds
to a port but doesn't set bp->port, then sctp_get_af_specific will
return NULL and sctp_connect() returns -EINVAL.
Then if sctp_bind() is called to bind to another port, the last
port it has bound will leak due to bp->port is NULL by then.
sctp_connect() doesn't need to bind ports, as later __sctp_connect
will do it if bp->port is NULL. So remove it from sctp_connect().
While at it, remove the unnecessary sockaddr.sa_family len check
as it's already done in sctp_inet_connect.
Fixes: 644fbdeacf1d ("sctp: fix the issue that flags are ignored when using kernel_connect")
Reported-by: [email protected]
Signed-off-by: Xin Long <[email protected]>
Acked-by: Marcelo Ricardo Leitner <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Pull two more NFS client fixes from Anna Schumaker:
"These are both stable fixes.
One to calculate the correct client message length in the case of
partial transmissions. And the other to set the proper TCP timeout for
flexfiles"
* tag 'nfs-for-5.2-4' of git://git.linux-nfs.org/projects/anna/linux-nfs:
NFS/flexfiles: Use the correct TCP timeout for flexfiles I/O
SUNRPC: Fix up calculation of client message length
|
|
For dependencies in next patches.
Resolve conflicts:
- Use uverbs_get_cleared_udata() with new cq allocation flow
- Continue to delete nes despite SPDX conflict
- Resolve list appends in mlx5_command_str()
- Use u16 for vport_rule stuff
- Resolve list appends in struct ib_client
Signed-off-by: Jason Gunthorpe <[email protected]>
|
|
The bpf_redirect_map() helper used by XDP programs doesn't return any
indication of whether it can successfully redirect to the map index it was
given. Instead, BPF programs have to track this themselves, leading to
programs using duplicate maps to track which entries are populated in the
devmap.
This patch fixes this by moving the map lookup into the bpf_redirect_map()
helper, which makes it possible to return failure to the eBPF program. The
lower bits of the flags argument is used as the return code, which means
that existing users who pass a '0' flag argument will get XDP_ABORTED.
With this, a BPF program can check the return code from the helper call and
react by, for instance, substituting a different redirect. This works for
any type of map used for redirect.
Signed-off-by: Toke Høiland-Jørgensen <[email protected]>
Acked-by: Jonathan Lemon <[email protected]>
Acked-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
|
|
The bpf_redirect_info struct has an 'ifindex' member which was named back
when the redirects could only target egress interfaces. Now that we can
also redirect to sockets and CPUs, this is a bit misleading, so rename the
member to tgt_index.
Reorder the struct members so we can have 'tgt_index' and 'tgt_value' next
to each other in a subsequent patch.
Signed-off-by: Toke Høiland-Jørgensen <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
|
|
The socket map uses a linked list instead of a bitmap to keep track of
which entries to flush. Do the same for devmap and cpumap, as this means we
don't have to care about the map index when enqueueing things into the
map (and so we can cache the map lookup).
Signed-off-by: Toke Høiland-Jørgensen <[email protected]>
Acked-by: Jonathan Lemon <[email protected]>
Acked-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux
Misc updates from mlx5-next branch:
1) E-Switch vport metadata support for source vport matching
2) Convert mkey_table to XArray
3) Shared IRQs and to use single IRQ for all async EQs
Signed-off-by: Saeed Mahameed <[email protected]>
|
|
When the taprio qdisc is running in "txtime offload" mode, it will
set the launchtime value (in skb->tstamp) for all the packets which do
not have the SO_TXTIME socket option. But, the TCP packets already have
this value set and it indicates the earliest departure time represented
in CLOCK_MONOTONIC clock.
We need to respect the timestamp set by the TCP subsystem. So, convert
this time to the clock which taprio is using and ensure that the packet
is not transmitted before the deadline set by TCP.
Signed-off-by: Vedang Patel <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Later in this series we will need to transform from
CLOCK_MONOTONIC (used in TCP) to the clock reference used in TAPRIO.
Signed-off-by: Vinicius Costa Gomes <[email protected]>
Signed-off-by: Vedang Patel <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Currently, we are seeing non-critical packets being transmitted outside of
their timeslice. We can confirm that the packets are being dequeued at the
right time. So, the delay is induced in the hardware side. The most likely
reason is the hardware queues are starving the lower priority queues.
In order to improve the performance of taprio, we will be making use of the
txtime feature provided by the ETF qdisc. For all the packets which do not
have the SO_TXTIME option set, taprio will set the transmit timestamp (set
in skb->tstamp) in this mode. TAPrio Qdisc will ensure that the transmit
time for the packet is set to when the gate is open. If SO_TXTIME is set,
the TAPrio qdisc will validate whether the timestamp (in skb->tstamp)
occurs when the gate corresponding to skb's traffic class is open.
Following two parameters added to support this mode:
- flags: used to enable txtime-assist mode. Will also be used to enable
other modes (like hardware offloading) later.
- txtime-delay: This indicates the minimum time it will take for the packet
to hit the wire. This is useful in determining whether we can transmit
the packet in the remaining time if the gate corresponding to the packet is
currently open.
An example configuration for enabling txtime-assist:
tc qdisc replace dev eth0 parent root handle 100 taprio \\
num_tc 3 \\
map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \\
queues 1@0 1@0 1@0 \\
base-time 1558653424279842568 \\
sched-entry S 01 300000 \\
sched-entry S 02 300000 \\
sched-entry S 04 400000 \\
flags 0x1 \\
txtime-delay 40000 \\
clockid CLOCK_TAI
tc qdisc replace dev $IFACE parent 100:1 etf skip_sock_check \\
offload delta 200000 clockid CLOCK_TAI
Note that all the traffic classes are mapped to the same queue. This is
only possible in taprio when txtime-assist is enabled. Also, note that the
ETF Qdisc is enabled with offload mode set.
In this mode, if the packet's traffic class is open and the complete packet
can be transmitted, taprio will try to transmit the packet immediately.
This will be done by setting skb->tstamp to current_time + the time delta
indicated in the txtime-delay parameter. This parameter indicates the time
taken (in software) for packet to reach the network adapter.
If the packet cannot be transmitted in the current interval or if the
packet's traffic is not currently transmitting, the skb->tstamp is set to
the next available timestamp value. This is tracked in the next_launchtime
parameter in the struct sched_entry.
The behaviour w.r.t admin and oper schedules is not changed from what is
present in software mode.
The transmit time is already known in advance. So, we do not need the HR
timers to advance the schedule and wakeup the dequeue side of taprio. So,
HR timer won't be run when this mode is enabled.
Signed-off-by: Vedang Patel <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Remove inline directive from length_to_duration(). We will let the compiler
make the decisions.
Signed-off-by: Vedang Patel <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
cycle time for a particular schedule is calculated only when it is first
installed. So, it makes sense to just calculate it once right after the
'cycle_time' parameter has been parsed and store it in cycle_time.
Signed-off-by: Vedang Patel <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|