| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
A null pointer reference issue can be triggered when the response of a
stream reconf request arrives after the timer is triggered, such as:
send Incoming SSN Reset Request --->
CPU0:
reconf timer is triggered,
go to the handler code before hold sk lock
<--- reply with Outgoing SSN Reset Request
CPU1:
process Outgoing SSN Reset Request,
and set asoc->strreset_chunk to NULL
CPU0:
continue the handler code, hold sk lock,
and try to hold asoc->strreset_chunk, crash!
In Ying Xu's testing, the call trace is:
[ ] BUG: kernel NULL pointer dereference, address: 0000000000000010
[ ] RIP: 0010:sctp_chunk_hold+0xe/0x40 [sctp]
[ ] Call Trace:
[ ] <IRQ>
[ ] sctp_sf_send_reconf+0x2c/0x100 [sctp]
[ ] sctp_do_sm+0xa4/0x220 [sctp]
[ ] sctp_generate_reconf_event+0xbd/0xe0 [sctp]
[ ] call_timer_fn+0x26/0x130
This patch is to fix it by returning from the timer handler if asoc
strreset_chunk is already set to NULL.
Fixes: 7b9438de0cd4 ("sctp: add stream reconf timer")
Reported-by: Ying Xu <[email protected]>
Signed-off-by: Xin Long <[email protected]>
Acked-by: Marcelo Ricardo Leitner <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
This patch adds a new mib named MPTCP_MIB_INFINITEMAPTX, increase it
when a infinite mapping has been sent out.
Signed-off-by: Geliang Tang <[email protected]>
Signed-off-by: Mat Martineau <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
This patch adds the infinite mapping receiving logic. When the infinite
mapping is received, set the map_data_len of the subflow to 0.
In subflow_check_data_avail(), only reset the subflow when the map_data_len
of the subflow is non-zero.
Suggested-by: Paolo Abeni <[email protected]>
Signed-off-by: Geliang Tang <[email protected]>
Signed-off-by: Mat Martineau <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
This patch adds the infinite mapping sending logic.
Add a new flag send_infinite_map in struct mptcp_subflow_context. Set
it true when a single contiguous subflow is in use and the
allow_infinite_fallback flag is true in mptcp_pm_mp_fail_received().
In mptcp_sendmsg_frag(), if this flag is true, call the new function
mptcp_update_infinite_map() to set the infinite mapping.
Add a new flag infinite_map in struct mptcp_ext, set it true in
mptcp_update_infinite_map(), and check this flag in a new helper
mptcp_check_infinite_map().
In mptcp_update_infinite_map(), set data_len to 0, and clear the
send_infinite_map flag, then do fallback.
In mptcp_established_options(), use the helper mptcp_check_infinite_map()
to let the infinite mapping DSS can be sent out in the fallback mode.
Suggested-by: Paolo Abeni <[email protected]>
Signed-off-by: Geliang Tang <[email protected]>
Signed-off-by: Mat Martineau <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
This patch adds a new member allow_infinite_fallback in mptcp_sock,
which is initialized to 'true' when the connection begins and is set
to 'false' on any retransmit or successful MP_JOIN. Only do infinite
mapping fallback if there is a single subflow AND there have been no
retransmissions AND there have never been any MP_JOINs.
Suggested-by: Paolo Abeni <[email protected]>
Signed-off-by: Geliang Tang <[email protected]>
Signed-off-by: Mat Martineau <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
This patch adds the fallback check in subflow_check_data_avail(). Only
do the fallback when the msk hasn't fallen back yet.
Suggested-by: Paolo Abeni <[email protected]>
Signed-off-by: Geliang Tang <[email protected]>
Signed-off-by: Mat Martineau <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
When a bad checksum is detected and a single subflow is in use, don't
send RST + MP_FAIL, send data_ack + MP_FAIL instead.
So invoke tcp_send_active_reset() only when mptcp_has_another_subflow()
is true.
Signed-off-by: Geliang Tang <[email protected]>
Signed-off-by: Mat Martineau <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
If an ACK (s)acks multiple skbs, we favor the information
from the most recently sent skb by choosing the skb with
the highest prior_delivered count. But in the interval
between receiving ACKs, we send multiple skbs with the same
prior_delivered, because the tp->delivered only changes
when we receive an ACK.
We used RACK's solution, copying tcp_rack_sent_after() as
tcp_skb_sent_after() helper to determine "which packet was
sent last?". Later, we will use tcp_skb_sent_after() instead
in RACK.
Fixes: b9f64820fb22 ("tcp: track data delivery rate for a TCP connection")
Signed-off-by: Pengcheng Yang <[email protected]>
Cc: Paolo Abeni <[email protected]>
Acked-by: Neal Cardwell <[email protected]>
Tested-by: Neal Cardwell <[email protected]>
Reviewed-by: Eric Dumazet <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
br_vlan_group() can return NULL and thus return value must be checked
to avoid dereferencing a NULL pointer.
Fixes: 6284c723d9b9 ("net: bridge: mst: Notify switchdev drivers of VLAN MSTI migrations")
Signed-off-by: Clément Léger <[email protected]>
Acked-by: Nikolay Aleksandrov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
In tcp_create_openreq_child we adjust tcp_header_len for md5 using the
remote address in newsk. But that address is still 0 in newsk at this
point, and it is only set later by the callers (tcp_v[46]_syn_recv_sock).
Use the address from the request socket instead.
Fixes: cfb6eeb4c860 ("[TCP]: MD5 Signature Option (RFC2385) support.")
Signed-off-by: Francesco Ruggeri <[email protected]>
Reviewed-by: Eric Dumazet <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
xmit_check_hhlen() observes the dst for getting the device hard header
length to make sure a modified packet can fit. When a helper which changes
the dst - such as bpf_skb_set_tunnel_key() - is called as part of the
xmit program the accessed dst is no longer valid.
This leads to the following splat:
BUG: kernel NULL pointer dereference, address: 00000000000000de
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: 0000 [#1] PREEMPT SMP PTI
CPU: 0 PID: 798 Comm: ping Not tainted 5.18.0-rc2+ #103
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014
RIP: 0010:bpf_xmit+0xfb/0x17f
Code: c6 c0 4d cd 8e 48 c7 c7 7d 33 f0 8e e8 42 09 fb ff 48 8b 45 58 48 8b 95 c8 00 00 00 48 2b 95 c0 00 00 00 48 83 e0 fe 48 8b 00 <0f> b7 80 de 00 00 00 39 c2 73 22 29 d0 b9 20 0a 00 00 31 d2 48 89
RSP: 0018:ffffb148c0bc7b98 EFLAGS: 00010282
RAX: 0000000000000000 RBX: 0000000000240008 RCX: 0000000000000000
RDX: 0000000000000010 RSI: 00000000ffffffea RDI: 00000000ffffffff
RBP: ffff922a828a4e00 R08: ffffffff8f1350e8 R09: 00000000ffffdfff
R10: ffffffff8f055100 R11: ffffffff8f105100 R12: 0000000000000000
R13: ffff922a828a4e00 R14: 0000000000000040 R15: 0000000000000000
FS: 00007f414e8f0080(0000) GS:ffff922afdc00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000000000de CR3: 0000000002d80006 CR4: 0000000000370ef0
Call Trace:
<TASK>
lwtunnel_xmit.cold+0x71/0xc8
ip_finish_output2+0x279/0x520
? __ip_finish_output.part.0+0x21/0x130
Fix by fetching the device hard header length before running the BPF code.
Fixes: 3a0af8fd61f9 ("bpf: BPF for lightweight tunnel infrastructure")
Signed-off-by: Eyal Birger <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
A relocated task must release its previous transport.
Fixes: 82ee41b85cef1 ("SUNRPC don't resend a task on an offlined transport")
Signed-off-by: Olga Kornievskaia <[email protected]>
Signed-off-by: Trond Myklebust <[email protected]>
|
|
deletion
This patch fixes spurious EEXIST errors.
Extend d2df92e98a34 ("netfilter: nft_set_rbtree: handle element
re-addition after deletion") to deal with elements with same end flags
in the same transation.
Reset the overlap flag as described by 7c84d41416d8 ("netfilter:
nft_set_rbtree: Detect partial overlaps on insertion").
Fixes: 7c84d41416d8 ("netfilter: nft_set_rbtree: Detect partial overlaps on insertion")
Fixes: d2df92e98a34 ("netfilter: nft_set_rbtree: handle element re-addition after deletion")
Signed-off-by: Pablo Neira Ayuso <[email protected]>
Reviewed-by: Stefano Brivio <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>
|
|
The device_node pointer is returned by of_parse_phandle() with refcount
incremented. We should use of_node_put() on it when done.
of_node_put() will check for NULL value.
Fixes: a20f997010c4 ("net: dsa: Don't instantiate phylink for CPU/DSA ports unless needed")
Signed-off-by: Miaoqian Lin <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
All the *_redirect() and *_update_pmtu() functions initialise their
struct flowi4 variable with either __build_flow_key() or
build_sk_flow_key(). When sk is provided, these functions use
RT_CONN_FLAGS() to set ->flowi4_tos and always use RT_SCOPE_UNIVERSE
for ->flowi4_scope. Then they rely on ip_rt_fix_tos() to adjust the
scope based on the RTO_ONLINK bit and to mask the tos with
IPTOS_RT_MASK.
This patch modifies __build_flow_key() and build_sk_flow_key() to
properly initialise ->flowi4_tos and ->flowi4_scope, so that the
ICMP redirects and PMTU handlers don't need an extra call to
ip_rt_fix_tos() before doing a fib lookup. That is, we:
* Drop RT_CONN_FLAGS(): use ip_sock_rt_tos() and ip_sock_rt_scope()
instead, so that we don't have to rely on ip_rt_fix_tos() to adjust
the scope anymore.
* Apply IPTOS_RT_MASK to the tos, so that we don't need
ip_rt_fix_tos() to do it for us.
* Drop the ip_rt_fix_tos() calls that now become useless.
The only remaining ip_rt_fix_tos() caller is ip_route_output_key_hash()
which needs it as long as external callers still use the RTO_ONLINK
flag.
Note:
This patch also drops some useless RT_TOS() calls as IPTOS_RT_MASK is
a stronger mask.
Signed-off-by: Guillaume Nault <[email protected]>
Reviewed-by: David Ahern <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Now that ip_rt_fix_tos() doesn't reset ->flowi4_scope unconditionally,
we don't have to rely on the RTO_ONLINK bit to properly set the scope
of a flowi4 structure. We can just set ->flowi4_scope explicitly and
avoid using RTO_ONLINK in ->flowi4_tos.
This patch converts callers of ip_route_connect(). Instead of setting
the tos parameter with RT_CONN_FLAGS(sk), as all callers do, we can:
1- Drop the tos parameter from ip_route_connect(): its value was
entirely based on sk, which is also passed as parameter.
2- Set ->flowi4_scope depending on the SOCK_LOCALROUTE socket option
instead of always initialising it with RT_SCOPE_UNIVERSE (let's
define ip_sock_rt_scope() for this purpose).
3- Avoid overloading ->flowi4_tos with RTO_ONLINK: since the scope is
now properly initialised, we don't need to tell ip_rt_fix_tos() to
adjust ->flowi4_scope for us. So let's define ip_sock_rt_tos(),
which is the same as RT_CONN_FLAGS() but without the RTO_ONLINK
bit overload.
Note:
In the original ip_route_connect() code, __ip_route_output_key()
might clear the RTO_ONLINK bit of fl4->flowi4_tos (because of
ip_rt_fix_tos()). Therefore flowi4_update_output() had to reuse the
original tos variable. Now that we don't set RTO_ONLINK any more,
this is not a problem and we can use fl4->flowi4_tos in
flowi4_update_output().
Signed-off-by: Guillaume Nault <[email protected]>
Reviewed-by: David Ahern <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
All callers already initialise ->flowi4_scope with RT_SCOPE_UNIVERSE,
either by manual field assignment, memset(0) of the whole structure or
implicit structure initialisation of on-stack variables
(RT_SCOPE_UNIVERSE actually equals 0).
Therefore, we don't need to always initialise ->flowi4_scope in
ip_rt_fix_tos(). We only need to reduce the scope to RT_SCOPE_LINK when
the special RTO_ONLINK flag is present in the tos.
This will allow some code simplification, like removing
ip_rt_fix_tos(). Also, the long term idea is to remove RTO_ONLINK
entirely by properly initialising ->flowi4_scope, instead of
overloading ->flowi4_tos with a special flag. Eventually, this will
allow to convert ->flowi4_tos to dscp_t.
Signed-off-by: Guillaume Nault <[email protected]>
Reviewed-by: David Ahern <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
This patch replaces some sk_ipv6only tests with ipv6_only_sock().
Signed-off-by: Kuniyuki Iwashima <[email protected]>
Reviewed-by: David Ahern <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Since commit 9fe516ba3fb2 ("inet: move ipv6only in sock_common"),
ipv6_only_sock() and __ipv6_only_sock() are the same macro. Let's
remove the one.
Signed-off-by: Kuniyuki Iwashima <[email protected]>
Reviewed-by: David Ahern <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
This reverts commit b6177d3240a4
ip-link command is testing kernel capability by sending a RTM_NEWLINK
request, without any argument. It accepts everything in reply, except
EOPNOTSUPP and EINVAL (functions iplink_have_newlink / accept_msg)
So we must keep compatiblity here, invalid empty message should not
return EINVAL
Signed-off-by: Florent Fourcot <[email protected]>
Tested-by: Guillaume Nault <[email protected]>
Reviewed-by: Eric Dumazet <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Fix mistake in the original patch where limits were specified but the
handler didn't take care of the limits.
Signed-off-by: Arun Ajith S <[email protected]>
Reviewed-by: David Ahern <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
remove unnecessary void* type castings.
Signed-off-by: Yu Zhe <[email protected]>
[[email protected]: Fix missing const in batadv_choose* functions]
Signed-off-by: Sven Eckelmann <[email protected]>
Signed-off-by: Simon Wunderlich <[email protected]>
|
|
This version will contain all the (major or even only minor) changes for
Linux 5.19.
The version number isn't a semantic version number with major and minor
information. It is just encoding the year of the expected publishing as
Linux -rc1 and the number of published versions this year (starting at 0).
Signed-off-by: Simon Wunderlich <[email protected]>
|
|
drivers/net/ethernet/microchip/lan966x/lan966x_main.c
d08ed852560e ("net: lan966x: Make sure to release ptp interrupt")
c8349639324a ("net: lan966x: Add FDMA functionality")
Signed-off-by: Paolo Abeni <[email protected]>
|
|
Both pskb_may_pull() and skb_clone_writable()'s length parameters are of
type unsigned int already. Therefore, change this function's write_len
param to unsigned int type.
Signed-off-by: Liu Jian <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Song Liu <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
The data length of skb frags + frag_list may be greater than 0xffff, and
skb_header_pointer can not handle negative offset. So, here INT_MAX is used
to check the validity of offset. Add the same change to the related function
skb_store_bytes.
Fixes: 05c74e5e53f6 ("bpf: add bpf_skb_load_bytes helper")
Signed-off-by: Liu Jian <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Song Liu <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Before this patch the existence of vlan filters was conditional on the vlan
protocol being matched in the tc rule. For example, the following rule:
tc filter add dev eth1 ingress flower vlan_prio 5
was illegal because vlan protocol (e.g. 802.1q) does not appear in the rule.
Remove the above restriction by looking at the num_of_vlans filter to
allow further matching on vlan attributes. The following rule becomes
legal as a result of this commit:
tc filter add dev eth1 ingress flower num_of_vlans 1 vlan_prio 5
because having num_of_vlans==1 implies that the packet is single tagged.
Change is_vlan_key helper to look at the number of vlans in addition to
the vlan ethertype. The outcome of this change is that outer (e.g. vlan_prio)
and inner (e.g. cvlan_prio) tag vlan filters require the number of vlan
tags to be greater then 0 and 1 accordingly.
As a result of is_vlan_key change, the ethertype may be set to 0 when
matching on the number of vlans. Update fl_set_key_vlan to avoid setting
key, mask vlan_tpid for the 0 ethertype.
Signed-off-by: Boris Sukholitko <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
These are bookkeeping parts of the new num_of_vlans filter.
Defines, dump, load and set are being done here.
Signed-off-by: Boris Sukholitko <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Our customers in the fiber telecom world have network configurations
where they would like to control their traffic according to the number
of tags appearing in the packet.
For example, TR247 GPON conformance test suite specification mostly
talks about untagged, single, double tagged packets and gives lax
guidelines on the vlan protocol vs. number of vlan tags.
This is different from the common IT networks where 802.1Q and 802.1ad
protocols are usually describe single and double tagged packet. GPON
configurations that we work with have arbitrary mix the above protocols
and number of vlan tags in the packet.
The goal is to make the following TC commands possible:
tc filter add dev eth1 ingress flower \
num_of_vlans 1 vlan_prio 5 action drop
From our logs, we have redirect rules such that:
tc filter add dev $GPON ingress flower num_of_vlans $N \
action mirred egress redirect dev $DEV
where N can range from 0 to 3 and $DEV is the function of $N.
Also there are rules setting skb mark based on the number of vlans:
tc filter add dev $GPON ingress flower num_of_vlans $N vlan_prio \
$P action skbedit mark $M
This new dissector allows extracting the number of vlan tags existing in
the packet.
Signed-off-by: Boris Sukholitko <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Whitespace only.
Signed-off-by: Boris Sukholitko <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
There are somewhat repetitive ethertype checks in fl_set_key. Refactor
them into is_vlan_key helper function.
To make the changes clearer, avoid touching identation levels. This is
the job for the next patch in the series.
Signed-off-by: Boris Sukholitko <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
A cross-chip notifier with "targeted_match=true" is one that matches
only the local port of the switch that emitted it. In other words,
passing through the cross-chip notifier layer serves no purpose.
Eliminate this concept by calling directly ds->ops->port_change_mtu
instead of emitting a targeted cross-chip notifier. This leaves the
DSA_NOTIFIER_MTU event being emitted only for MTU updates on the CPU
port, which need to be reflected also across all DSA links.
Signed-off-by: Vladimir Oltean <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
We can get a hold of the "ds" pointer directly from "dp", no need for
the dsa_slave_priv.
Signed-off-by: Vladimir Oltean <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
We could retrieve the cpu_dp pointer directly from the "dp" we already
have, no need to resort to dsa_to_port(ds, port).
This change also removes the need for an "int port", so that is also
deleted.
Signed-off-by: Vladimir Oltean <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Use the more conventional iterator over user ports instead of explicitly
ignoring them, and use the more conventional name "other_dp" instead of
"dp_iter", for readability.
Signed-off-by: Vladimir Oltean <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
To determine whether a given port should react to the port targeted by
the notifier, dsa_port_host_vlan_match() and dsa_port_host_address_match()
look at the positioning of the switch port currently executing the
notifier relative to the switch port for which the notifier was emitted.
To maintain stylistic compatibility with the other match functions from
switch.c, the host address and host VLAN match functions take the
notifier information about targeted port, switch and tree indices as
argument. However, these functions only use that information to retrieve
the struct dsa_port *targeted_dp, which is an invariant for the outer
loop that calls them. So it makes more sense to calculate the targeted
dp only once, and pass it to them as argument.
But furthermore, the targeted dp is actually known at the time the call
to dsa_port_notify() is made. It is just that we decide to only save the
indices of the port, switch and tree in the notifier structure, just to
retrace our steps and find the dp again using dsa_switch_find() and
dsa_to_port().
But both the above functions are relatively expensive, since they need
to iterate through lists. It appears more straightforward to make all
notifiers just pass the targeted dp inside their info structure, and
have the code that needs the indices to look at info->dp->index instead
of info->port, or info->dp->ds->index instead of info->sw_index, or
info->dp->ds->dst->index instead of info->tree_index.
For the sake of consistency, all cross-chip notifiers are converted to
pass the "dp" directly.
Signed-off-by: Vladimir Oltean <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
In dsa_port_switchdev_unsync_attrs() there is a comment that resetting
the VLAN filtering isn't done where it is expected. And since commit
108dc8741c20 ("net: dsa: Avoid cross-chip syncing of VLAN filtering"),
there is no reason to handle this in switch.c either.
Therefore, move the logic to port.c, and adapt it slightly to the data
structures and naming conventions from there.
Signed-off-by: Vladimir Oltean <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
bpf_{sk,task,inode}_storage_free() do not need to use
call_rcu_tasks_trace as no BPF program should be accessing the owner
as it's being destroyed. The only other reader at this point is
bpf_local_storage_map_free() which uses normal RCU.
The only path that needs trace RCU are:
* bpf_local_storage_{delete,update} helpers
* map_{delete,update}_elem() syscalls
Fixes: 0fe4b381a59e ("bpf: Allow bpf_local_storage to be used by sleepable programs")
Signed-off-by: KP Singh <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Acked-by: Martin KaFai Lau <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
netlink_dump() is allocating an skb, reserves space in it
but forgets to reset network header.
This allows a BPF program, invoked later from sk_filter()
to access uninitialized kernel memory from the reserved
space.
Theorically mac header reset could be omitted, because
it is set to a special initial value.
bpf_internal_load_pointer_neg_helper calls skb_mac_header()
without checking skb_mac_header_was_set().
Relying on skb->len not being too big seems fragile.
We also could add a sanity check in bpf_internal_load_pointer_neg_helper()
to avoid surprises in the future.
syzbot report was:
BUG: KMSAN: uninit-value in ___bpf_prog_run+0xa22b/0xb420 kernel/bpf/core.c:1637
___bpf_prog_run+0xa22b/0xb420 kernel/bpf/core.c:1637
__bpf_prog_run32+0x121/0x180 kernel/bpf/core.c:1796
bpf_dispatcher_nop_func include/linux/bpf.h:784 [inline]
__bpf_prog_run include/linux/filter.h:626 [inline]
bpf_prog_run include/linux/filter.h:633 [inline]
__bpf_prog_run_save_cb+0x168/0x580 include/linux/filter.h:756
bpf_prog_run_save_cb include/linux/filter.h:770 [inline]
sk_filter_trim_cap+0x3bc/0x8c0 net/core/filter.c:150
sk_filter include/linux/filter.h:905 [inline]
netlink_dump+0xe0c/0x16c0 net/netlink/af_netlink.c:2276
netlink_recvmsg+0x1129/0x1c80 net/netlink/af_netlink.c:2002
sock_recvmsg_nosec net/socket.c:948 [inline]
sock_recvmsg net/socket.c:966 [inline]
sock_read_iter+0x5a9/0x630 net/socket.c:1039
do_iter_readv_writev+0xa7f/0xc70
do_iter_read+0x52c/0x14c0 fs/read_write.c:786
vfs_readv fs/read_write.c:906 [inline]
do_readv+0x432/0x800 fs/read_write.c:943
__do_sys_readv fs/read_write.c:1034 [inline]
__se_sys_readv fs/read_write.c:1031 [inline]
__x64_sys_readv+0xe5/0x120 fs/read_write.c:1031
do_syscall_x64 arch/x86/entry/common.c:51 [inline]
do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:81
entry_SYSCALL_64_after_hwframe+0x44/0xae
Uninit was stored to memory at:
___bpf_prog_run+0x96c/0xb420 kernel/bpf/core.c:1558
__bpf_prog_run32+0x121/0x180 kernel/bpf/core.c:1796
bpf_dispatcher_nop_func include/linux/bpf.h:784 [inline]
__bpf_prog_run include/linux/filter.h:626 [inline]
bpf_prog_run include/linux/filter.h:633 [inline]
__bpf_prog_run_save_cb+0x168/0x580 include/linux/filter.h:756
bpf_prog_run_save_cb include/linux/filter.h:770 [inline]
sk_filter_trim_cap+0x3bc/0x8c0 net/core/filter.c:150
sk_filter include/linux/filter.h:905 [inline]
netlink_dump+0xe0c/0x16c0 net/netlink/af_netlink.c:2276
netlink_recvmsg+0x1129/0x1c80 net/netlink/af_netlink.c:2002
sock_recvmsg_nosec net/socket.c:948 [inline]
sock_recvmsg net/socket.c:966 [inline]
sock_read_iter+0x5a9/0x630 net/socket.c:1039
do_iter_readv_writev+0xa7f/0xc70
do_iter_read+0x52c/0x14c0 fs/read_write.c:786
vfs_readv fs/read_write.c:906 [inline]
do_readv+0x432/0x800 fs/read_write.c:943
__do_sys_readv fs/read_write.c:1034 [inline]
__se_sys_readv fs/read_write.c:1031 [inline]
__x64_sys_readv+0xe5/0x120 fs/read_write.c:1031
do_syscall_x64 arch/x86/entry/common.c:51 [inline]
do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:81
entry_SYSCALL_64_after_hwframe+0x44/0xae
Uninit was created at:
slab_post_alloc_hook mm/slab.h:737 [inline]
slab_alloc_node mm/slub.c:3244 [inline]
__kmalloc_node_track_caller+0xde3/0x14f0 mm/slub.c:4972
kmalloc_reserve net/core/skbuff.c:354 [inline]
__alloc_skb+0x545/0xf90 net/core/skbuff.c:426
alloc_skb include/linux/skbuff.h:1158 [inline]
netlink_dump+0x30f/0x16c0 net/netlink/af_netlink.c:2242
netlink_recvmsg+0x1129/0x1c80 net/netlink/af_netlink.c:2002
sock_recvmsg_nosec net/socket.c:948 [inline]
sock_recvmsg net/socket.c:966 [inline]
sock_read_iter+0x5a9/0x630 net/socket.c:1039
do_iter_readv_writev+0xa7f/0xc70
do_iter_read+0x52c/0x14c0 fs/read_write.c:786
vfs_readv fs/read_write.c:906 [inline]
do_readv+0x432/0x800 fs/read_write.c:943
__do_sys_readv fs/read_write.c:1034 [inline]
__se_sys_readv fs/read_write.c:1031 [inline]
__x64_sys_readv+0xe5/0x120 fs/read_write.c:1031
do_syscall_x64 arch/x86/entry/common.c:51 [inline]
do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:81
entry_SYSCALL_64_after_hwframe+0x44/0xae
CPU: 0 PID: 3470 Comm: syz-executor751 Not tainted 5.17.0-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Fixes: db65a3aaf29e ("netlink: Trim skb to alloc size to avoid MSG_TRUNC")
Fixes: 9063e21fb026 ("netlink: autosize skb lengthes")
Signed-off-by: Eric Dumazet <[email protected]>
Reported-by: syzbot <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Paolo Abeni <[email protected]>
|
|
A request without interface name/interface index/interface group cannot
work. We should return EINVAL
Signed-off-by: Florent Fourcot <[email protected]>
Signed-off-by: Brian Baboch <[email protected]>
Reviewed-by: Jakub Kicinski <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
If IFLA_ALT_IFNAME is set and given interface is not found,
we should return ENODEV and be consistent with IFLA_IFNAME
behaviour
This commit extends feature of commit 76c9ac0ee878,
"net: rtnetlink: add possibility to use alternative names as message handle"
CC: Jiri Pirko <[email protected]>
Signed-off-by: Florent Fourcot <[email protected]>
Signed-off-by: Brian Baboch <[email protected]>
Reviewed-by: Jakub Kicinski <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
buffer called "ifname" given in function rtnl_dev_get
is always valid when called by setlink/newlink,
but contains only empty string when IFLA_IFNAME is not given. So
IFLA_ALT_IFNAME is always ignored
This patch fixes rtnl_dev_get function with a remove of ifname argument,
and move ifname copy in do_setlink when required.
It extends feature of commit 76c9ac0ee878,
"net: rtnetlink: add possibility to use alternative names as message
handle""
CC: Jiri Pirko <[email protected]>
Signed-off-by: Florent Fourcot <[email protected]>
Signed-off-by: Brian Baboch <[email protected]>
Reviewed-by: Jakub Kicinski <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
When the interface does not exist, and a group is given, the given
parameters are being set to all interfaces of the given group. The given
IFNAME/ALT_IF_NAME are being ignored in that case.
That can be dangerous since a typo (or a deleted interface) can produce
weird side effects for caller:
Case 1:
IFLA_IFNAME=valid_interface
IFLA_GROUP=1
MTU=1234
Case 1 will update MTU and group of the given interface "valid_interface".
Case 2:
IFLA_IFNAME=doesnotexist
IFLA_GROUP=1
MTU=1234
Case 2 will update MTU of all interfaces in group 1. IFLA_IFNAME is
ignored in this case
This behaviour is not consistent and dangerous. In order to fix this issue,
we now return ENODEV when the given IFNAME does not exist.
Signed-off-by: Florent Fourcot <[email protected]>
Signed-off-by: Brian Baboch <[email protected]>
Reviewed-by: Jakub Kicinski <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
This patch allows users to pick queue_mapping, range
from A to B. Then we can load balance packets from A
to B tx queue. The range is an unsigned 16bit value
in decimal format.
$ tc filter ... action skbedit queue_mapping skbhash A B
"skbedit queue_mapping QUEUE_MAPPING" (from "man 8 tc-skbedit")
is enhanced with flags: SKBEDIT_F_TXQ_SKBHASH
+----+ +----+ +----+
| P1 | | P2 | | Pn |
+----+ +----+ +----+
| | |
+-----------+-----------+
|
| clsact/skbedit
| MQ
v
+-----------+-----------+
| q0 | qn | qm
v v v
HTB/FQ FIFO ... FIFO
For example:
If P1 sends out packets to different Pods on other host, and
we want distribute flows from qn - qm. Then we can use skb->hash
as hash.
setup commands:
$ NETDEV=eth0
$ ip netns add n1
$ ip link add ipv1 link $NETDEV type ipvlan mode l2
$ ip link set ipv1 netns n1
$ ip netns exec n1 ifconfig ipv1 2.2.2.100/24 up
$ tc qdisc add dev $NETDEV clsact
$ tc filter add dev $NETDEV egress protocol ip prio 1 \
flower skip_hw src_ip 2.2.2.100 action skbedit queue_mapping skbhash 2 6
$ tc qdisc add dev $NETDEV handle 1: root mq
$ tc qdisc add dev $NETDEV parent 1:1 handle 2: htb
$ tc class add dev $NETDEV parent 2: classid 2:1 htb rate 100kbit
$ tc class add dev $NETDEV parent 2: classid 2:2 htb rate 200kbit
$ tc qdisc add dev $NETDEV parent 1:2 tbf rate 100mbit burst 100mb latency 1
$ tc qdisc add dev $NETDEV parent 1:3 pfifo
$ tc qdisc add dev $NETDEV parent 1:4 pfifo
$ tc qdisc add dev $NETDEV parent 1:5 pfifo
$ tc qdisc add dev $NETDEV parent 1:6 pfifo
$ tc qdisc add dev $NETDEV parent 1:7 pfifo
$ ip netns exec n1 iperf3 -c 2.2.2.1 -i 1 -t 10 -P 10
pick txqueue from 2 - 6:
$ ethtool -S $NETDEV | grep -i tx_queue_[0-9]_bytes
tx_queue_0_bytes: 42
tx_queue_1_bytes: 0
tx_queue_2_bytes: 11442586444
tx_queue_3_bytes: 7383615334
tx_queue_4_bytes: 3981365579
tx_queue_5_bytes: 3983235051
tx_queue_6_bytes: 6706236461
tx_queue_7_bytes: 42
tx_queue_8_bytes: 0
tx_queue_9_bytes: 0
txqueues 2 - 6 are mapped to classid 1:3 - 1:7
$ tc -s class show dev $NETDEV
...
class mq 1:3 root leaf 8002:
Sent 11949133672 bytes 7929798 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
class mq 1:4 root leaf 8003:
Sent 7710449050 bytes 5117279 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
class mq 1:5 root leaf 8004:
Sent 4157648675 bytes 2758990 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
class mq 1:6 root leaf 8005:
Sent 4159632195 bytes 2759990 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
class mq 1:7 root leaf 8006:
Sent 7003169603 bytes 4646912 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
...
Cc: Jamal Hadi Salim <[email protected]>
Cc: Cong Wang <[email protected]>
Cc: Jiri Pirko <[email protected]>
Cc: "David S. Miller" <[email protected]>
Cc: Jakub Kicinski <[email protected]>
Cc: Jonathan Lemon <[email protected]>
Cc: Eric Dumazet <[email protected]>
Cc: Alexander Lobakin <[email protected]>
Cc: Paolo Abeni <[email protected]>
Cc: Talal Ahmad <[email protected]>
Cc: Kevin Hao <[email protected]>
Cc: Ilias Apalodimas <[email protected]>
Cc: Kees Cook <[email protected]>
Cc: Kumar Kartikeya Dwivedi <[email protected]>
Cc: Antoine Tenart <[email protected]>
Cc: Wei Wang <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Signed-off-by: Tonghao Zhang <[email protected]>
Reviewed-by: Jamal Hadi Salim <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
This patch fixes issue:
* If we install tc filters with act_skbedit in clsact hook.
It doesn't work, because netdev_core_pick_tx() overwrites
queue_mapping.
$ tc filter ... action skbedit queue_mapping 1
And this patch is useful:
* We can use FQ + EDT to implement efficient policies. Tx queues
are picked by xps, ndo_select_queue of netdev driver, or skb hash
in netdev_core_pick_tx(). In fact, the netdev driver, and skb
hash are _not_ under control. xps uses the CPUs map to select Tx
queues, but we can't figure out which task_struct of pod/containter
running on this cpu in most case. We can use clsact filters to classify
one pod/container traffic to one Tx queue. Why ?
In containter networking environment, there are two kinds of pod/
containter/net-namespace. One kind (e.g. P1, P2), the high throughput
is key in these applications. But avoid running out of network resource,
the outbound traffic of these pods is limited, using or sharing one
dedicated Tx queues assigned HTB/TBF/FQ Qdisc. Other kind of pods
(e.g. Pn), the low latency of data access is key. And the traffic is not
limited. Pods use or share other dedicated Tx queues assigned FIFO Qdisc.
This choice provides two benefits. First, contention on the HTB/FQ Qdisc
lock is significantly reduced since fewer CPUs contend for the same queue.
More importantly, Qdisc contention can be eliminated completely if each
CPU has its own FIFO Qdisc for the second kind of pods.
There must be a mechanism in place to support classifying traffic based on
pods/container to different Tx queues. Note that clsact is outside of Qdisc
while Qdisc can run a classifier to select a sub-queue under the lock.
In general recording the decision in the skb seems a little heavy handed.
This patch introduces a per-CPU variable, suggested by Eric.
The xmit.skip_txqueue flag is firstly cleared in __dev_queue_xmit().
- Tx Qdisc may install that skbedit actions, then xmit.skip_txqueue flag
is set in qdisc->enqueue() though tx queue has been selected in
netdev_tx_queue_mapping() or netdev_core_pick_tx(). That flag is cleared
firstly in __dev_queue_xmit(), is useful:
- Avoid picking Tx queue with netdev_tx_queue_mapping() in next netdev
in such case: eth0 macvlan - eth0.3 vlan - eth0 ixgbe-phy:
For example, eth0, macvlan in pod, which root Qdisc install skbedit
queue_mapping, send packets to eth0.3, vlan in host. In __dev_queue_xmit() of
eth0.3, clear the flag, does not select tx queue according to skb->queue_mapping
because there is no filters in clsact or tx Qdisc of this netdev.
Same action taked in eth0, ixgbe in Host.
- Avoid picking Tx queue for next packet. If we set xmit.skip_txqueue
in tx Qdisc (qdisc->enqueue()), the proper way to clear it is clearing it
in __dev_queue_xmit when processing next packets.
For performance reasons, use the static key. If user does not config the NET_EGRESS,
the patch will not be compiled.
+----+ +----+ +----+
| P1 | | P2 | | Pn |
+----+ +----+ +----+
| | |
+-----------+-----------+
|
| clsact/skbedit
| MQ
v
+-----------+-----------+
| q0 | q1 | qn
v v v
HTB/FQ HTB/FQ ... FIFO
Cc: Jamal Hadi Salim <[email protected]>
Cc: Cong Wang <[email protected]>
Cc: Jiri Pirko <[email protected]>
Cc: "David S. Miller" <[email protected]>
Cc: Jakub Kicinski <[email protected]>
Cc: Jonathan Lemon <[email protected]>
Cc: Eric Dumazet <[email protected]>
Cc: Alexander Lobakin <[email protected]>
Cc: Paolo Abeni <[email protected]>
Cc: Talal Ahmad <[email protected]>
Cc: Kevin Hao <[email protected]>
Cc: Ilias Apalodimas <[email protected]>
Cc: Kees Cook <[email protected]>
Cc: Kumar Kartikeya Dwivedi <[email protected]>
Cc: Antoine Tenart <[email protected]>
Cc: Wei Wang <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Suggested-by: Eric Dumazet <[email protected]>
Signed-off-by: Tonghao Zhang <[email protected]>
Acked-by: Jamal Hadi Salim <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
The memory size of ip_vs_conn_tab changed after we use hlist
instead of list.
Fixes: 731109e78415 ("ipvs: use hlist instead of list")
Signed-off-by: Pengcheng Yang <[email protected]>
Acked-by: Julian Anastasov <[email protected]>
Acked-by: Simon Horman <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>
|
|
In case the checksum calculation is offloaded to the DSA master network
interface, it will include the switch trailing tag. As soon as the switch strips
that tag on egress, the calculated checksum is wrong.
Therefore, add the checksum calculation to the tagger (if required) before
adding the switch tag. This way, the hellcreek code works with all DSA master
interfaces regardless of their declared feature set.
Fixes: 01ef09caad66 ("net: dsa: Add tag handling for Hirschmann Hellcreek switches")
Signed-off-by: Kurt Kanzenbach <[email protected]>
Reviewed-by: Florian Fainelli <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Paolo Abeni <[email protected]>
|
|
In order to properly inform user about relationship between port and
line card, introduce a driver API to set line card for a port. Use this
information to extend port devlink netlink message by line card index
and also include the line card index into phys_port_name and by that
into a netdevice name.
Signed-off-by: Jiri Pirko <[email protected]>
Signed-off-by: Ido Schimmel <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Allow driver to mark a line card as active. Expose this state to the
userspace over devlink netlink interface with proper notifications.
'active' state means that line card was plugged in after
being provisioned.
Signed-off-by: Jiri Pirko <[email protected]>
Signed-off-by: Ido Schimmel <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
In order to be able to configure all needed stuff on a port/netdevice
of a line card without the line card being present, introduce line card
provisioning. Basically by setting a type, provisioning process will
start and driver is supposed to create a placeholder for instances
(ports/netdevices) for a line card type.
Allow the user to query the supported line card types over line card
get command. Then implement two netlink command SET to allow user to
set/unset the card type.
On the driver API side, add provision/unprovision ops and supported
types array to be advertised. Upon provision op call, the driver should
take care of creating the instances for the particular line card type.
Introduce provision_set/clear() functions to be called by the driver
once the provisioning/unprovisioning is done on its side. These helpers
are not to be called directly due to the async nature of provisioning.
Example:
$ devlink port # No ports are listed
$ devlink lc
pci/0000:01:00.0:
lc 1 state unprovisioned
supported_types:
16x100G
lc 2 state unprovisioned
supported_types:
16x100G
lc 3 state unprovisioned
supported_types:
16x100G
lc 4 state unprovisioned
supported_types:
16x100G
lc 5 state unprovisioned
supported_types:
16x100G
lc 6 state unprovisioned
supported_types:
16x100G
lc 7 state unprovisioned
supported_types:
16x100G
lc 8 state unprovisioned
supported_types:
16x100G
$ devlink lc set pci/0000:01:00.0 lc 8 type 16x100G
$ devlink lc show pci/0000:01:00.0 lc 8
pci/0000:01:00.0:
lc 8 state active type 16x100G
supported_types:
16x100G
$ devlink port
pci/0000:01:00.0/0: type notset flavour cpu port 0 splittable false
pci/0000:01:00.0/53: type eth netdev enp1s0nl8p1 flavour physical lc 8 port 1 splittable true lanes 4
pci/0000:01:00.0/54: type eth netdev enp1s0nl8p2 flavour physical lc 8 port 2 splittable true lanes 4
pci/0000:01:00.0/55: type eth netdev enp1s0nl8p3 flavour physical lc 8 port 3 splittable true lanes 4
pci/0000:01:00.0/56: type eth netdev enp1s0nl8p4 flavour physical lc 8 port 4 splittable true lanes 4
pci/0000:01:00.0/57: type eth netdev enp1s0nl8p5 flavour physical lc 8 port 5 splittable true lanes 4
pci/0000:01:00.0/58: type eth netdev enp1s0nl8p6 flavour physical lc 8 port 6 splittable true lanes 4
pci/0000:01:00.0/59: type eth netdev enp1s0nl8p7 flavour physical lc 8 port 7 splittable true lanes 4
pci/0000:01:00.0/60: type eth netdev enp1s0nl8p8 flavour physical lc 8 port 8 splittable true lanes 4
pci/0000:01:00.0/61: type eth netdev enp1s0nl8p9 flavour physical lc 8 port 9 splittable true lanes 4
pci/0000:01:00.0/62: type eth netdev enp1s0nl8p10 flavour physical lc 8 port 10 splittable true lanes 4
pci/0000:01:00.0/63: type eth netdev enp1s0nl8p11 flavour physical lc 8 port 11 splittable true lanes 4
pci/0000:01:00.0/64: type eth netdev enp1s0nl8p12 flavour physical lc 8 port 12 splittable true lanes 4
pci/0000:01:00.0/125: type eth netdev enp1s0nl8p13 flavour physical lc 8 port 13 splittable true lanes 4
pci/0000:01:00.0/126: type eth netdev enp1s0nl8p14 flavour physical lc 8 port 14 splittable true lanes 4
pci/0000:01:00.0/127: type eth netdev enp1s0nl8p15 flavour physical lc 8 port 15 splittable true lanes 4
pci/0000:01:00.0/128: type eth netdev enp1s0nl8p16 flavour physical lc 8 port 16 splittable true lanes 4
$ devlink lc set pci/0000:01:00.0 lc 8 notype
Signed-off-by: Jiri Pirko <[email protected]>
Signed-off-by: Ido Schimmel <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|