aboutsummaryrefslogtreecommitdiff
path: root/net
AgeCommit message (Collapse)AuthorFilesLines
2022-04-28hv_sock: Add validation for untrusted Hyper-V valuesAndrea Parri (Microsoft)1-2/+8
For additional robustness in the face of Hyper-V errors or malicious behavior, validate all values that originate from packets that Hyper-V has sent to the guest in the host-to-guest ring buffer. Ensure that invalid values cannot cause data being copied out of the bounds of the source buffer in hvs_stream_dequeue(). Signed-off-by: Andrea Parri (Microsoft) <[email protected]> Reviewed-by: Michael Kelley <[email protected]> Reviewed-by: Stefano Garzarella <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Wei Liu <[email protected]>
2022-04-28hv_sock: Copy packets sent by Hyper-V out of the ring bufferAndrea Parri (Microsoft)1-2/+7
Pointers to VMbus packets sent by Hyper-V are used by the hv_sock driver within the guest VM. Hyper-V can send packets with erroneous values or modify packet fields after they are processed by the guest. To defend against these scenarios, copy the incoming packet after validating its length and offset fields using hv_pkt_iter_{first,next}(). Use HVS_PKT_LEN(HVS_MTU_SIZE) to initialize the buffer which holds the copies of the incoming packets. In this way, the packet can no longer be modified by the host. Signed-off-by: Andrea Parri (Microsoft) <[email protected]> Reviewed-by: Michael Kelley <[email protected]> Reviewed-by: Stefano Garzarella <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Wei Liu <[email protected]>
2022-04-28hv_sock: Check hv_pkt_iter_first_raw()'s return valueAndrea Parri (Microsoft)1-0/+2
The function returns NULL if the ring buffer doesn't contain enough readable bytes to constitute a packet descriptor. The ring buffer's write_index is in memory which is shared with the Hyper-V host, an erroneous or malicious host could thus change its value and overturn the result of hvs_stream_has_data(). Signed-off-by: Andrea Parri (Microsoft) <[email protected]> Reviewed-by: Michael Kelley <[email protected]> Reviewed-by: Stefano Garzarella <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Wei Liu <[email protected]>
2022-04-28netfilter: nft_socket: only do sk lookups when indev is availableFlorian Westphal1-14/+38
Check if the incoming interface is available and NFT_BREAK in case neither skb->sk nor input device are set. Because nf_sk_lookup_slow*() assume packet headers are in the 'in' direction, use in postrouting is not going to yield a meaningful result. Same is true for the forward chain, so restrict the use to prerouting, input and output. Use in output work if a socket is already attached to the skb. Fixes: 554ced0a6e29 ("netfilter: nf_tables: add support for native socket matching") Reported-and-tested-by: Topi Miettinen <[email protected]> Signed-off-by: Florian Westphal <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]>
2022-04-28net: make sure net_rx_action() calls skb_defer_free_flush()Eric Dumazet1-1/+2
I missed a stray return; in net_rx_action(), which very well is taken whenever trigger_rx_softirq() has been called on a cpu that is no longer receiving network packets, or receiving too few of them. Fixes: 68822bdf76f1 ("net: generalize skb freeing deferral to per-cpu lists") Signed-off-by: Eric Dumazet <[email protected]> Reported-by: Ido Schimmel <[email protected]> Tested-by: Ido Schimmel <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Abeni <[email protected]>
2022-04-28Merge tag 'for-net-2022-04-27' of ↵Paolo Abeni3-42/+81
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth Luiz Augusto von Dentz says: ==================== bluetooth pull request for net: - Fix regression causing some HCI events to be discarded when they shouldn't. * tag 'for-net-2022-04-27' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth: Bluetooth: hci_sync: Cleanup hci_conn if it cannot be aborted Bluetooth: hci_event: Fix creating hci_conn object on error status Bluetooth: hci_event: Fix checking for invalid handle on error status ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Abeni <[email protected]>
2022-04-27Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextJakub Kicinski8-29/+81
Daniel Borkmann says: ==================== pull-request: bpf-next 2022-04-27 We've added 85 non-merge commits during the last 18 day(s) which contain a total of 163 files changed, 4499 insertions(+), 1521 deletions(-). The main changes are: 1) Teach libbpf to enhance BPF verifier log with human-readable and relevant information about failed CO-RE relocations, from Andrii Nakryiko. 2) Add typed pointer support in BPF maps and enable it for unreferenced pointers (via probe read) and referenced ones that can be passed to in-kernel helpers, from Kumar Kartikeya Dwivedi. 3) Improve xsk to break NAPI loop when rx queue gets full to allow for forward progress to consume descriptors, from Maciej Fijalkowski & Björn Töpel. 4) Fix a small RCU read-side race in BPF_PROG_RUN routines which dereferenced the effective prog array before the rcu_read_lock, from Stanislav Fomichev. 5) Implement BPF atomic operations for RV64 JIT, and add libbpf parsing logic for USDT arguments under riscv{32,64}, from Pu Lehui. 6) Implement libbpf parsing of USDT arguments under aarch64, from Alan Maguire. 7) Enable bpftool build for musl and remove nftw with FTW_ACTIONRETVAL usage so it can be shipped under Alpine which is musl-based, from Dominique Martinet. 8) Clean up {sk,task,inode} local storage trace RCU handling as they do not need to use call_rcu_tasks_trace() barrier, from KP Singh. 9) Improve libbpf API documentation and fix error return handling of various API functions, from Grant Seltzer. 10) Enlarge offset check for bpf_skb_{load,store}_bytes() helpers given data length of frags + frag_list may surpass old offset limit, from Liu Jian. 11) Various improvements to prog_tests in area of logging, test execution and by-name subtest selection, from Mykola Lysenko. 12) Simplify map_btf_id generation for all map types by moving this process to build time with help of resolve_btfids infra, from Menglong Dong. 13) Fix a libbpf bug in probing when falling back to legacy bpf_probe_read*() helpers; the probing caused always to use old helpers, from Runqing Yang. 14) Add support for ARCompact and ARCv2 platforms for libbpf's PT_REGS tracing macros, from Vladimir Isaev. 15) Cleanup BPF selftests to remove old & unneeded rlimit code given kernel switched to memcg-based memory accouting a while ago, from Yafang Shao. 16) Refactor of BPF sysctl handlers to move them to BPF core, from Yan Zhu. 17) Fix BPF selftests in two occasions to work around regressions caused by latest LLVM to unblock CI until their fixes are worked out, from Yonghong Song. 18) Misc cleanups all over the place, from various others. * https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (85 commits) selftests/bpf: Add libbpf's log fixup logic selftests libbpf: Fix up verifier log for unguarded failed CO-RE relos libbpf: Simplify bpf_core_parse_spec() signature libbpf: Refactor CO-RE relo human description formatting routine libbpf: Record subprog-resolved CO-RE relocations unconditionally selftests/bpf: Add CO-RE relos and SEC("?...") to linked_funcs selftests libbpf: Avoid joining .BTF.ext data with BPF programs by section name libbpf: Fix logic for finding matching program for CO-RE relocation libbpf: Drop unhelpful "program too large" guess libbpf: Fix anonymous type check in CO-RE logic bpf: Compute map_btf_id during build time selftests/bpf: Add test for strict BTF type check selftests/bpf: Add verifier tests for kptr selftests/bpf: Add C tests for kptr libbpf: Add kptr type tag macros to bpf_helpers.h bpf: Make BTF type match stricter for release arguments bpf: Teach verifier about kptr_get kfunc helpers bpf: Wire up freeing of referenced kptr bpf: Populate pairs of btf_id and destructor kfunc in btf bpf: Adapt copy_map_value for multiple offset case ... ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2022-04-27tls: Skip tls_append_frag on zero copy sizeMaxim Mikityanskiy1-5/+7
Calling tls_append_frag when max_open_record_len == record->len might add an empty fragment to the TLS record if the call happens to be on the page boundary. Normally tls_append_frag coalesces the zero-sized fragment to the previous one, but not if it's on page boundary. If a resync happens then, the mlx5 driver posts dump WQEs in tx_post_resync_dump, and the empty fragment may become a data segment with byte_count == 0, which will confuse the NIC and lead to a CQE error. This commit fixes the described issue by skipping tls_append_frag on zero size to avoid adding empty fragments. The fix is not in the driver, because an empty fragment is hardly the desired behavior. Fixes: e8f69799810c ("net/tls: Add generic NIC offload infrastructure") Signed-off-by: Maxim Mikityanskiy <[email protected]> Reviewed-by: Tariq Toukan <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2022-04-27Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfJakub Kicinski4-11/+32
Daniel Borkmann says: ==================== pull-request: bpf 2022-04-27 We've added 5 non-merge commits during the last 20 day(s) which contain a total of 6 files changed, 34 insertions(+), 12 deletions(-). The main changes are: 1) Fix xsk sockets when rx and tx are separately bound to the same umem, also fix xsk copy mode combined with busy poll, from Maciej Fijalkowski. 2) Fix BPF tunnel/collect_md helpers with bpf_xmit lwt hook usage which triggered a crash due to invalid metadata_dst access, from Eyal Birger. 3) Fix release of page pool in XDP live packet mode, from Toke Høiland-Jørgensen. 4) Fix potential NULL pointer dereference in kretprobes, from Adam Zabrocki. (Masami & Steven preferred this small fix to be routed via bpf tree given it's follow-up fix to Masami's rethook work that went via bpf earlier, too.) * https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: xsk: Fix possible crash when multiple sockets are created kprobes: Fix KRETPROBES when CONFIG_KRETPROBE_ON_RETHOOK is set bpf, lwt: Fix crash when using bpf_skb_set_tunnel_key() from bpf_xmit lwt hook bpf: Fix release of page_pool in BPF_PROG_RUN in test runner xsk: Fix l2fwd for copy mode + busy poll combo ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2022-04-27netfilter: conntrack: fix udp offload timeout sysctlVolodymyr Mytnyk1-1/+1
`nf_flowtable_udp_timeout` sysctl option is available only if CONFIG_NFT_FLOW_OFFLOAD enabled. But infra for this flow offload UDP timeout was added under CONFIG_NF_FLOW_TABLE config option. So, if you have CONFIG_NFT_FLOW_OFFLOAD disabled and CONFIG_NF_FLOW_TABLE enabled, the `nf_flowtable_udp_timeout` is not present in sysfs. Please note, that TCP flow offload timeout sysctl option is present even CONFIG_NFT_FLOW_OFFLOAD is disabled. I suppose it was a typo in commit that adds UDP flow offload timeout and CONFIG_NF_FLOW_TABLE should be used instead. Fixes: 975c57504da1 ("netfilter: conntrack: Introduce udp offload timeout configuration") Signed-off-by: Volodymyr Mytnyk <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]>
2022-04-27netfilter: nf_conntrack_tcp: re-init for syn packets onlyFlorian Westphal1-15/+6
Jaco Kroon reported tcp problems that Eric Dumazet and Neal Cardwell pinpointed to nf_conntrack tcp_in_window() bug. tcp trace shows following sequence: I > R Flags [S], seq 3451342529, win 62580, options [.. tfo [|tcp]> R > I Flags [S.], seq 2699962254, ack 3451342530, win 65535, options [..] R > I Flags [P.], seq 1:89, ack 1, [..] Note 3rd ACK is from responder to initiator so following branch is taken: } else if (((state->state == TCP_CONNTRACK_SYN_SENT && dir == IP_CT_DIR_ORIGINAL) || (state->state == TCP_CONNTRACK_SYN_RECV && dir == IP_CT_DIR_REPLY)) && after(end, sender->td_end)) { ... because state == TCP_CONNTRACK_SYN_RECV and dir is REPLY. This causes the scaling factor to be reset to 0: window scale option is only present in syn(ack) packets. This in turn makes nf_conntrack mark valid packets as out-of-window. This was always broken, it exists even in original commit where window tracking was added to ip_conntrack (nf_conntrack predecessor) in 2.6.9-rc1 kernel. Restrict to 'tcph->syn', just like the 3rd condtional added in commit 82b72cb94666 ("netfilter: conntrack: re-init state for retransmitted syn-ack"). Upon closer look, those conditionals/branches can be merged: Because earlier checks prevent syn-ack from showing up in original direction, the 'dir' checks in the conditional quoted above are redundant, remove them. Return early for pure syn retransmitted in reply direction (simultaneous open). Fixes: 9fb9cbb1082d ("[NETFILTER]: Add nf_conntrack subsystem.") Reported-by: Jaco Kroon <[email protected]> Signed-off-by: Florian Westphal <[email protected]> Acked-by: Jozsef Kadlecsik <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]>
2022-04-27mptcp: reset subflow when MP_FAIL doesn't respondGeliang Tang4-0/+68
This patch adds a new msk->flags bit MPTCP_FAIL_NO_RESPONSE, then reuses sk_timer to trigger a check if we have not received a response from the peer after sending MP_FAIL. If the peer doesn't respond properly, reset the subflow. Signed-off-by: Geliang Tang <[email protected]> Signed-off-by: Mat Martineau <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-04-27mptcp: add MP_FAIL response supportGeliang Tang3-1/+12
This patch adds a new struct member mp_fail_response_expect in struct mptcp_subflow_context to support MP_FAIL response. In the single subflow with checksum error and contiguous data special case, a MP_FAIL is sent in response to another MP_FAIL. Signed-off-by: Geliang Tang <[email protected]> Signed-off-by: Mat Martineau <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-04-27mptcp: add data lock for sk timersGeliang Tang1-0/+12
mptcp_data_lock() needs to be held when manipulating the msk retransmit_timer or the sk sk_timer. This patch adds the data lock for the both timers. Signed-off-by: Geliang Tang <[email protected]> Signed-off-by: Mat Martineau <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-04-27mptcp: use mptcp_stop_timerGeliang Tang1-2/+2
Use the helper mptcp_stop_timer() instead of using sk_stop_timer() to stop icsk_retransmit_timer directly. Signed-off-by: Geliang Tang <[email protected]> Signed-off-by: Mat Martineau <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-04-26net: Use this_cpu_inc() to increment net->core_statsSebastian Andrzej Siewior1-9/+5
The macro dev_core_stats_##FIELD##_inc() disables preemption and invokes netdev_core_stats_alloc() to return a per-CPU pointer. netdev_core_stats_alloc() will allocate memory on its first invocation which breaks on PREEMPT_RT because it requires non-atomic context for memory allocation. This can be avoided by enabling preemption in netdev_core_stats_alloc() assuming the caller always disables preemption. It might be better to replace local_inc() with this_cpu_inc() now that dev_core_stats_##FIELD##_inc() gained a preempt-disable section and does not rely on already disabled preemption. This results in less instructions on x86-64: local_inc: | incl %gs:__preempt_count(%rip) # __preempt_count | movq 488(%rdi), %rax # _1->core_stats, _22 | testq %rax, %rax # _22 | je .L585 #, | add %gs:this_cpu_off(%rip), %rax # this_cpu_off, tcp_ptr__ | .L586: | testq %rax, %rax # _27 | je .L587 #, | incq (%rax) # _6->a.counter | .L587: | decl %gs:__preempt_count(%rip) # __preempt_count this_cpu_inc(), this patch: | movq 488(%rdi), %rax # _1->core_stats, _5 | testq %rax, %rax # _5 | je .L591 #, | .L585: | incq %gs:(%rax) # _18->rx_dropped Use unsigned long as type for the counter. Use this_cpu_inc() to increment the counter. Use a plain read of the counter. Signed-off-by: Sebastian Andrzej Siewior <[email protected]> Reviewed-by: Eric Dumazet <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2022-04-26net: tls: fix async vs NIC crypto offloadJakub Kicinski1-0/+2
When NIC takes care of crypto (or the record has already been decrypted) we forget to update darg->async. ->async is supposed to mean whether record is async capable on input and whether record has been queued for async crypto on output. Reported-by: Gal Pressman <[email protected]> Fixes: 3547a1f9d988 ("tls: rx: use async as an in-out argument") Tested-by: Gal Pressman <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2022-04-26net: generalize skb freeing deferral to per-cpu listsEric Dumazet7-32/+82
Logic added in commit f35f821935d8 ("tcp: defer skb freeing after socket lock is released") helped bulk TCP flows to move the cost of skbs frees outside of critical section where socket lock was held. But for RPC traffic, or hosts with RFS enabled, the solution is far from being ideal. For RPC traffic, recvmsg() has to return to user space right after skb payload has been consumed, meaning that BH handler has no chance to pick the skb before recvmsg() thread. This issue is more visible with BIG TCP, as more RPC fit one skb. For RFS, even if BH handler picks the skbs, they are still picked from the cpu on which user thread is running. Ideally, it is better to free the skbs (and associated page frags) on the cpu that originally allocated them. This patch removes the per socket anchor (sk->defer_list) and instead uses a per-cpu list, which will hold more skbs per round. This new per-cpu list is drained at the end of net_action_rx(), after incoming packets have been processed, to lower latencies. In normal conditions, skbs are added to the per-cpu list with no further action. In the (unlikely) cases where the cpu does not run net_action_rx() handler fast enough, we use an IPI to raise NET_RX_SOFTIRQ on the remote cpu. Also, we do not bother draining the per-cpu list from dev_cpu_dead() This is because skbs in this list have no requirement on how fast they should be freed. Note that we can add in the future a small per-cpu cache if we see any contention on sd->defer_lock. Tested on a pair of hosts with 100Gbit NIC, RFS enabled, and /proc/sys/net/ipv4/tcp_rmem[2] tuned to 16MB to work around page recycling strategy used by NIC driver (its page pool capacity being too small compared to number of skbs/pages held in sockets receive queues) Note that this tuning was only done to demonstrate worse conditions for skb freeing for this particular test. These conditions can happen in more general production workload. 10 runs of one TCP_STREAM flow Before: Average throughput: 49685 Mbit. Kernel profiles on cpu running user thread recvmsg() show high cost for skb freeing related functions (*) 57.81% [kernel] [k] copy_user_enhanced_fast_string (*) 12.87% [kernel] [k] skb_release_data (*) 4.25% [kernel] [k] __free_one_page (*) 3.57% [kernel] [k] __list_del_entry_valid 1.85% [kernel] [k] __netif_receive_skb_core 1.60% [kernel] [k] __skb_datagram_iter (*) 1.59% [kernel] [k] free_unref_page_commit (*) 1.16% [kernel] [k] __slab_free 1.16% [kernel] [k] _copy_to_iter (*) 1.01% [kernel] [k] kfree (*) 0.88% [kernel] [k] free_unref_page 0.57% [kernel] [k] ip6_rcv_core 0.55% [kernel] [k] ip6t_do_table 0.54% [kernel] [k] flush_smp_call_function_queue (*) 0.54% [kernel] [k] free_pcppages_bulk 0.51% [kernel] [k] llist_reverse_order 0.38% [kernel] [k] process_backlog (*) 0.38% [kernel] [k] free_pcp_prepare 0.37% [kernel] [k] tcp_recvmsg_locked (*) 0.37% [kernel] [k] __list_add_valid 0.34% [kernel] [k] sock_rfree 0.34% [kernel] [k] _raw_spin_lock_irq (*) 0.33% [kernel] [k] __page_cache_release 0.33% [kernel] [k] tcp_v6_rcv (*) 0.33% [kernel] [k] __put_page (*) 0.29% [kernel] [k] __mod_zone_page_state 0.27% [kernel] [k] _raw_spin_lock After patch: Average throughput: 73076 Mbit. Kernel profiles on cpu running user thread recvmsg() looks better: 81.35% [kernel] [k] copy_user_enhanced_fast_string 1.95% [kernel] [k] _copy_to_iter 1.95% [kernel] [k] __skb_datagram_iter 1.27% [kernel] [k] __netif_receive_skb_core 1.03% [kernel] [k] ip6t_do_table 0.60% [kernel] [k] sock_rfree 0.50% [kernel] [k] tcp_v6_rcv 0.47% [kernel] [k] ip6_rcv_core 0.45% [kernel] [k] read_tsc 0.44% [kernel] [k] _raw_spin_lock_irqsave 0.37% [kernel] [k] _raw_spin_lock 0.37% [kernel] [k] native_irq_return_iret 0.33% [kernel] [k] __inet6_lookup_established 0.31% [kernel] [k] ip6_protocol_deliver_rcu 0.29% [kernel] [k] tcp_rcv_established 0.29% [kernel] [k] llist_reverse_order v2: kdoc issue (kernel bots) do not defer if (alloc_cpu == smp_processor_id()) (Paolo) replace the sk_buff_head with a single-linked list (Jakub) add a READ_ONCE()/WRITE_ONCE() for the lockless read of sd->defer_list Signed-off-by: Eric Dumazet <[email protected]> Acked-by: Paolo Abeni <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2022-04-26bpf: Compute map_btf_id during build timeMenglong Dong3-12/+9
For now, the field 'map_btf_id' in 'struct bpf_map_ops' for all map types are computed during vmlinux-btf init: btf_parse_vmlinux() -> btf_vmlinux_map_ids_init() It will lookup the btf_type according to the 'map_btf_name' field in 'struct bpf_map_ops'. This process can be done during build time, thanks to Jiri's resolve_btfids. selftest of map_ptr has passed: $96 map_ptr:OK Summary: 1/0 PASSED, 0 SKIPPED, 0 FAILED Reported-by: kernel test robot <[email protected]> Signed-off-by: Menglong Dong <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]>
2022-04-26Bluetooth: hci_sync: Cleanup hci_conn if it cannot be abortedLuiz Augusto von Dentz3-18/+38
This attempts to cleanup the hci_conn if it cannot be aborted as otherwise it would likely result in having the controller and host stack out of sync with respect to connection handle. Signed-off-by: Luiz Augusto von Dentz <[email protected]> Signed-off-by: Marcel Holtmann <[email protected]>
2022-04-26Bluetooth: hci_event: Fix creating hci_conn object on error statusLuiz Augusto von Dentz1-0/+12
It is useless to create a hci_conn object if on error status as the result would be it being freed in the process and anyway it is likely the result of controller and host stack being out of sync. Signed-off-by: Luiz Augusto von Dentz <[email protected]> Signed-off-by: Marcel Holtmann <[email protected]>
2022-04-26Bluetooth: hci_event: Fix checking for invalid handle on error statusLuiz Augusto von Dentz1-29/+36
Commit d5ebaa7c5f6f6 introduces checks for handle range (e.g HCI_CONN_HANDLE_MAX) but controllers like Intel AX200 don't seem to respect the valid range int case of error status: > HCI Event: Connect Complete (0x03) plen 11 Status: Page Timeout (0x04) Handle: 65535 Address: 94:DB:56:XX:XX:XX (Sony Home Entertainment& Sound Products Inc) Link type: ACL (0x01) Encryption: Disabled (0x00) [1644965.827560] Bluetooth: hci0: Ignoring HCI_Connection_Complete for invalid handle Because of it is impossible to cleanup the connections properly since the stack would attempt to cancel the connection which is no longer in progress causing the following trace: < HCI Command: Create Connection Cancel (0x01|0x0008) plen 6 Address: 94:DB:56:XX:XX:XX (Sony Home Entertainment& Sound Products Inc) = bluetoothd: src/profile.c:record_cb() Unable to get Hands-Free Voice gateway SDP record: Connection timed out > HCI Event: Command Complete (0x0e) plen 10 Create Connection Cancel (0x01|0x0008) ncmd 1 Status: Unknown Connection Identifier (0x02) Address: 94:DB:56:XX:XX:XX (Sony Home Entertainment& Sound Products Inc) < HCI Command: Create Connection Cancel (0x01|0x0008) plen 6 Address: 94:DB:56:XX:XX:XX (Sony Home Entertainment& Sound Products Inc) Fixes: d5ebaa7c5f6f6 ("Bluetooth: hci_event: Ignore multiple conn complete events") Signed-off-by: Luiz Augusto von Dentz <[email protected]> Signed-off-by: Marcel Holtmann <[email protected]>
2022-04-26xsk: Fix possible crash when multiple sockets are createdMaciej Fijalkowski2-4/+25
Fix a crash that happens if an Rx only socket is created first, then a second socket is created that is Tx only and bound to the same umem as the first socket and also the same netdev and queue_id together with the XDP_SHARED_UMEM flag. In this specific case, the tx_descs array page pool was not created by the first socket as it was an Rx only socket. When the second socket is bound it needs this tx_descs array of this shared page pool as it has a Tx component, but unfortunately it was never allocated, leading to a crash. Note that this array is only used for zero-copy drivers using the batched Tx APIs, currently only ice and i40e. [ 5511.150360] BUG: kernel NULL pointer dereference, address: 0000000000000008 [ 5511.158419] #PF: supervisor write access in kernel mode [ 5511.164472] #PF: error_code(0x0002) - not-present page [ 5511.170416] PGD 0 P4D 0 [ 5511.173347] Oops: 0002 [#1] PREEMPT SMP PTI [ 5511.178186] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G E 5.18.0-rc1+ #97 [ 5511.187245] Hardware name: Intel Corp. GRANTLEY/GRANTLEY, BIOS GRRFCRB1.86B.0276.D07.1605190235 05/19/2016 [ 5511.198418] RIP: 0010:xsk_tx_peek_release_desc_batch+0x198/0x310 [ 5511.205375] Code: c0 83 c6 01 84 c2 74 6d 8d 46 ff 23 07 44 89 e1 48 83 c0 14 48 c1 e1 04 48 c1 e0 04 48 03 47 10 4c 01 c1 48 8b 50 08 48 8b 00 <48> 89 51 08 48 89 01 41 80 bd d7 00 00 00 00 75 82 48 8b 19 49 8b [ 5511.227091] RSP: 0018:ffffc90000003dd0 EFLAGS: 00010246 [ 5511.233135] RAX: 0000000000000000 RBX: ffff88810c8da600 RCX: 0000000000000000 [ 5511.241384] RDX: 000000000000003c RSI: 0000000000000001 RDI: ffff888115f555c0 [ 5511.249634] RBP: ffffc90000003e08 R08: 0000000000000000 R09: ffff889092296b48 [ 5511.257886] R10: 0000ffffffffffff R11: ffff889092296800 R12: 0000000000000000 [ 5511.266138] R13: ffff88810c8db500 R14: 0000000000000040 R15: 0000000000000100 [ 5511.274387] FS: 0000000000000000(0000) GS:ffff88903f800000(0000) knlGS:0000000000000000 [ 5511.283746] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 5511.290389] CR2: 0000000000000008 CR3: 00000001046e2001 CR4: 00000000003706f0 [ 5511.298640] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 5511.306892] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 5511.315142] Call Trace: [ 5511.317972] <IRQ> [ 5511.320301] ice_xmit_zc+0x68/0x2f0 [ice] [ 5511.324977] ? ktime_get+0x38/0xa0 [ 5511.328913] ice_napi_poll+0x7a/0x6a0 [ice] [ 5511.333784] __napi_poll+0x2c/0x160 [ 5511.337821] net_rx_action+0xdd/0x200 [ 5511.342058] __do_softirq+0xe6/0x2dd [ 5511.346198] irq_exit_rcu+0xb5/0x100 [ 5511.350339] common_interrupt+0xa4/0xc0 [ 5511.354777] </IRQ> [ 5511.357201] <TASK> [ 5511.359625] asm_common_interrupt+0x1e/0x40 [ 5511.364466] RIP: 0010:cpuidle_enter_state+0xd2/0x360 [ 5511.370211] Code: 49 89 c5 0f 1f 44 00 00 31 ff e8 e9 00 7b ff 45 84 ff 74 12 9c 58 f6 c4 02 0f 85 72 02 00 00 31 ff e8 02 0c 80 ff fb 45 85 f6 <0f> 88 11 01 00 00 49 63 c6 4c 2b 2c 24 48 8d 14 40 48 8d 14 90 49 [ 5511.391921] RSP: 0018:ffffffff82a03e60 EFLAGS: 00000202 [ 5511.397962] RAX: ffff88903f800000 RBX: 0000000000000001 RCX: 000000000000001f [ 5511.406214] RDX: 0000000000000000 RSI: ffffffff823400b9 RDI: ffffffff8234c046 [ 5511.424646] RBP: ffff88810a384800 R08: 000005032a28c046 R09: 0000000000000008 [ 5511.443233] R10: 000000000000000b R11: 0000000000000006 R12: ffffffff82bcf700 [ 5511.461922] R13: 000005032a28c046 R14: 0000000000000001 R15: 0000000000000000 [ 5511.480300] cpuidle_enter+0x29/0x40 [ 5511.494329] do_idle+0x1c7/0x250 [ 5511.507610] cpu_startup_entry+0x19/0x20 [ 5511.521394] start_kernel+0x649/0x66e [ 5511.534626] secondary_startup_64_no_verify+0xc3/0xcb [ 5511.549230] </TASK> Detect such case during bind() and allocate this memory region via newly introduced xp_alloc_tx_descs(). Also, use kvcalloc instead of kcalloc as for other buffer pool allocations, so that it matches the kvfree() from xp_destroy(). Fixes: d1bc532e99be ("i40e: xsk: Move tmp desc array from driver to pool") Signed-off-by: Maciej Fijalkowski <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Acked-by: Magnus Karlsson <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2022-04-26net/af_packet: add VLAN support for AF_PACKET SOCK_RAW GSOHangbin Liu1-5/+13
Currently, the kernel drops GSO VLAN tagged packet if it's created with socket(AF_PACKET, SOCK_RAW, 0) plus virtio_net_hdr. The reason is AF_PACKET doesn't adjust the skb network header if there is a VLAN tag. Then after virtio_net_hdr_set_proto() called, the skb->protocol will be set to ETH_P_IP/IPv6. And in later inet/ipv6_gso_segment() the skb is dropped as network header position is invalid. Let's handle VLAN packets by adjusting network header position in packet_parse_headers(). The adjustment is safe and does not affect the later xmit as tap device also did that. In packet_snd(), packet_parse_headers() need to be moved before calling virtio_net_hdr_set_proto(), so we can set correct skb->protocol and network header first. There is no need to update tpacket_snd() as it calls packet_parse_headers() in tpacket_fill_skb(), which is already before calling virtio_net_hdr_* functions. skb->no_fcs setting is also moved upper to make all skb settings together and keep consistency with function packet_sendmsg_spkt(). Signed-off-by: Hangbin Liu <[email protected]> Acked-by: Willem de Bruijn <[email protected]> Acked-by: Michael S. Tsirkin <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Abeni <[email protected]>
2022-04-26mctp: defer the kfree of object mdev->addrsLin Ma1-1/+1
The function mctp_unregister() reclaims the device's relevant resource when a netcard detaches. However, a running routine may be unaware of this and cause the use-after-free of the mdev->addrs object. The race condition can be demonstrated below cleanup thread another thread | unregister_netdev() | mctp_sendmsg() ... | ... mctp_unregister() | rt = mctp_route_lookup() ... | mctl_local_output() kfree(mdev->addrs) | ... | saddr = rt->dev->addrs[0]; | An attacker can adopt the (recent provided) mtcpserial driver with pty to fake the device detaching and use the userfaultfd to increase the race success chance (in mctp_sendmsg). The KASan report for such a POC is shown below: [ 86.051955] ================================================================== [ 86.051955] BUG: KASAN: use-after-free in mctp_local_output+0x4e9/0xb7d [ 86.051955] Read of size 1 at addr ffff888005f298c0 by task poc/295 [ 86.051955] [ 86.051955] Call Trace: [ 86.051955] <TASK> [ 86.051955] dump_stack_lvl+0x33/0x42 [ 86.051955] print_report.cold.13+0xb2/0x6b3 [ 86.051955] ? preempt_schedule_irq+0x57/0x80 [ 86.051955] ? mctp_local_output+0x4e9/0xb7d [ 86.051955] kasan_report+0xa5/0x120 [ 86.051955] ? mctp_local_output+0x4e9/0xb7d [ 86.051955] mctp_local_output+0x4e9/0xb7d [ 86.051955] ? mctp_dev_set_key+0x79/0x79 [ 86.051955] ? copyin+0x38/0x50 [ 86.051955] ? _copy_from_iter+0x1b6/0xf20 [ 86.051955] ? sysvec_apic_timer_interrupt+0x97/0xb0 [ 86.051955] ? asm_sysvec_apic_timer_interrupt+0x12/0x20 [ 86.051955] ? mctp_local_output+0x1/0xb7d [ 86.051955] mctp_sendmsg+0x64d/0xdb0 [ 86.051955] ? mctp_sk_close+0x20/0x20 [ 86.051955] ? __fget_light+0x2fd/0x4f0 [ 86.051955] ? mctp_sk_close+0x20/0x20 [ 86.051955] sock_sendmsg+0xdd/0x110 [ 86.051955] __sys_sendto+0x1cc/0x2a0 [ 86.051955] ? __ia32_sys_getpeername+0xa0/0xa0 [ 86.051955] ? new_sync_write+0x335/0x550 [ 86.051955] ? alloc_file+0x22f/0x500 [ 86.051955] ? __ip_do_redirect+0x820/0x1820 [ 86.051955] ? vfs_write+0x44d/0x7b0 [ 86.051955] ? vfs_write+0x44d/0x7b0 [ 86.051955] ? fput_many+0x15/0x120 [ 86.051955] ? ksys_write+0x155/0x1b0 [ 86.051955] ? __ia32_sys_read+0xa0/0xa0 [ 86.051955] __x64_sys_sendto+0xd8/0x1b0 [ 86.051955] ? exit_to_user_mode_prepare+0x2f/0x120 [ 86.051955] ? syscall_exit_to_user_mode+0x12/0x20 [ 86.051955] do_syscall_64+0x3a/0x80 [ 86.051955] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 86.051955] RIP: 0033:0x7f82118a56b3 [ 86.051955] RSP: 002b:00007ffdb154b110 EFLAGS: 00000293 ORIG_RAX: 000000000000002c [ 86.051955] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f82118a56b3 [ 86.051955] RDX: 0000000000000010 RSI: 00007f8211cd4000 RDI: 0000000000000007 [ 86.051955] RBP: 00007ffdb154c1d0 R08: 00007ffdb154b164 R09: 000000000000000c [ 86.051955] R10: 0000000000000000 R11: 0000000000000293 R12: 000055d779800db0 [ 86.051955] R13: 00007ffdb154c2b0 R14: 0000000000000000 R15: 0000000000000000 [ 86.051955] </TASK> [ 86.051955] [ 86.051955] Allocated by task 295: [ 86.051955] kasan_save_stack+0x1c/0x40 [ 86.051955] __kasan_kmalloc+0x84/0xa0 [ 86.051955] mctp_rtm_newaddr+0x242/0x610 [ 86.051955] rtnetlink_rcv_msg+0x2fd/0x8b0 [ 86.051955] netlink_rcv_skb+0x11c/0x340 [ 86.051955] netlink_unicast+0x439/0x630 [ 86.051955] netlink_sendmsg+0x752/0xc00 [ 86.051955] sock_sendmsg+0xdd/0x110 [ 86.051955] __sys_sendto+0x1cc/0x2a0 [ 86.051955] __x64_sys_sendto+0xd8/0x1b0 [ 86.051955] do_syscall_64+0x3a/0x80 [ 86.051955] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 86.051955] [ 86.051955] Freed by task 301: [ 86.051955] kasan_save_stack+0x1c/0x40 [ 86.051955] kasan_set_track+0x21/0x30 [ 86.051955] kasan_set_free_info+0x20/0x30 [ 86.051955] __kasan_slab_free+0x104/0x170 [ 86.051955] kfree+0x8c/0x290 [ 86.051955] mctp_dev_notify+0x161/0x2c0 [ 86.051955] raw_notifier_call_chain+0x8b/0xc0 [ 86.051955] unregister_netdevice_many+0x299/0x1180 [ 86.051955] unregister_netdevice_queue+0x210/0x2f0 [ 86.051955] unregister_netdev+0x13/0x20 [ 86.051955] mctp_serial_close+0x6d/0xa0 [ 86.051955] tty_ldisc_kill+0x31/0xa0 [ 86.051955] tty_ldisc_hangup+0x24f/0x560 [ 86.051955] __tty_hangup.part.28+0x2ce/0x6b0 [ 86.051955] tty_release+0x327/0xc70 [ 86.051955] __fput+0x1df/0x8b0 [ 86.051955] task_work_run+0xca/0x150 [ 86.051955] exit_to_user_mode_prepare+0x114/0x120 [ 86.051955] syscall_exit_to_user_mode+0x12/0x20 [ 86.051955] do_syscall_64+0x46/0x80 [ 86.051955] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 86.051955] [ 86.051955] The buggy address belongs to the object at ffff888005f298c0 [ 86.051955] which belongs to the cache kmalloc-8 of size 8 [ 86.051955] The buggy address is located 0 bytes inside of [ 86.051955] 8-byte region [ffff888005f298c0, ffff888005f298c8) [ 86.051955] [ 86.051955] The buggy address belongs to the physical page: [ 86.051955] flags: 0x100000000000200(slab|node=0|zone=1) [ 86.051955] raw: 0100000000000200 dead000000000100 dead000000000122 ffff888005c42280 [ 86.051955] raw: 0000000000000000 0000000080660066 00000001ffffffff 0000000000000000 [ 86.051955] page dumped because: kasan: bad access detected [ 86.051955] [ 86.051955] Memory state around the buggy address: [ 86.051955] ffff888005f29780: 00 fc fc fc fc 00 fc fc fc fc 00 fc fc fc fc 00 [ 86.051955] ffff888005f29800: fc fc fc fc 00 fc fc fc fc 00 fc fc fc fc 00 fc [ 86.051955] >ffff888005f29880: fc fc fc fb fc fc fc fc fa fc fc fc fc fa fc fc [ 86.051955] ^ [ 86.051955] ffff888005f29900: fc fc 00 fc fc fc fc 00 fc fc fc fc 00 fc fc fc [ 86.051955] ffff888005f29980: fc 00 fc fc fc fc 00 fc fc fc fc 00 fc fc fc fc [ 86.051955] ================================================================== To this end, just like the commit e04480920d1e ("Bluetooth: defer cleanup of resources in hci_unregister_dev()") this patch defers the destructive kfree(mdev->addrs) in mctp_unregister to the mctp_dev_put, where the refcount of mdev is zero and the entire device is reclaimed. This prevents the use-after-free because the sendmsg thread holds the reference of mdev in the mctp_route object. Fixes: 583be982d934 (mctp: Add device handling and netlink interface) Signed-off-by: Lin Ma <[email protected]> Acked-by: Jeremy Kerr <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Abeni <[email protected]>
2022-04-25selftests/bpf: Add test for strict BTF type checkKumar Kartikeya Dwivedi1-1/+21
Ensure that the edge case where first member type was matched successfully even if it didn't match BTF type of register is caught and rejected by the verifier. Signed-off-by: Kumar Kartikeya Dwivedi <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2022-04-25selftests/bpf: Add verifier tests for kptrKumar Kartikeya Dwivedi1-5/+40
Reuse bpf_prog_test functions to test the support for PTR_TO_BTF_ID in BPF map case, including some tests that verify implementation sanity and corner cases. Signed-off-by: Kumar Kartikeya Dwivedi <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2022-04-25bpf: Tag argument to be released in bpf_func_protoKumar Kartikeya Dwivedi1-1/+1
Add a new type flag for bpf_arg_type that when set tells verifier that for a release function, that argument's register will be the one for which meta.ref_obj_id will be set, and which will then be released using release_reference. To capture the regno, introduce a new field release_regno in bpf_call_arg_meta. This would be required in the next patch, where we may either pass NULL or a refcounted pointer as an argument to the release function bpf_kptr_xchg. Just releasing only when meta.ref_obj_id is set is not enough, as there is a case where the type of argument needed matches, but the ref_obj_id is set to 0. Hence, we must enforce that whenever meta.ref_obj_id is zero, the register that is to be released can only be NULL for a release function. Since we now indicate whether an argument is to be released in bpf_func_proto itself, is_release_function helper has lost its utitlity, hence refactor code to work without it, and just rely on meta.release_regno to know when to release state for a ref_obj_id. Still, the restriction of one release argument and only one ref_obj_id passed to BPF helper or kfunc remains. This may be lifted in the future. Signed-off-by: Kumar Kartikeya Dwivedi <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2022-04-25net: mac802154: Create an error helper for asynchronous offloading errorsMiquel Raynal1-0/+6
A few drivers do the full transmit operation asynchronously, which means that a bus error that happens when forwarding the packet to the transmitter or a timeout happening when offloading the request to the transmitter will not be reported immediately. The solution in this case is to call this new helper to free the necessary resources, restart the queue and always return the same generic TRAC error code: IEEE802154_SYSTEM_ERROR. Suggested-by: Alexander Aring <[email protected]> Signed-off-by: Miquel Raynal <[email protected]> Acked-by: Alexander Aring <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Stefan Schmidt <[email protected]>
2022-04-25net: mac802154: Create an offloaded transmission error helperMiquel Raynal1-0/+11
So far there is only a helper for successful transmissions, which led device drivers to implement their own handling in case of error. Unfortunately, we really need all the drivers to give the hand back to the core once they are done in order to be able to build a proper synchronous API. So let's create a _xmit_error() helper and take this opportunity to fill the new device-global field storing Tx statuses. Suggested-by: Alexander Aring <[email protected]> Signed-off-by: Miquel Raynal <[email protected]> Acked-by: Alexander Aring <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Stefan Schmidt <[email protected]>
2022-04-25net: mac802154: Save a global error code on transmissionsMiquel Raynal2-1/+6
So far no error is returned from a failing transmission. However it might sometimes be useful, and particularly easy to use during sync transfers (for certain MLME commands). Let's create an internal variable for that, global to the device. Right now only success are registered, which is rather useless, but soon we will have more situations filling this field. Signed-off-by: Miquel Raynal <[email protected]> Acked-by: Alexander Aring <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Stefan Schmidt <[email protected]>
2022-04-25net/smc: Fix slab-out-of-bounds issue in fallbackWen Gu2-23/+59
syzbot reported a slab-out-of-bounds/use-after-free issue, which was caused by accessing an already freed smc sock in fallback-specific callback functions of clcsock. This patch fixes the issue by restoring fallback-specific callback functions to original ones and resetting clcsock sk_user_data to NULL before freeing smc sock. Meanwhile, this patch introduces sk_callback_lock to make the access and assignment to sk_user_data mutually exclusive. Reported-by: [email protected] Fixes: 341adeec9ada ("net/smc: Forward wakeup to smc socket waitqueue after fallback") Link: https://lore.kernel.org/r/[email protected]/ Signed-off-by: Wen Gu <[email protected]> Acked-by: Karsten Graul <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2022-04-25net/smc: Only save the original clcsock callback functionsWen Gu3-20/+67
Both listen and fallback process will save the current clcsock callback functions and establish new ones. But if both of them happen, the saved callback functions will be overwritten. So this patch introduces some helpers to ensure that only save the original callback functions of clcsock. Fixes: 341adeec9ada ("net/smc: Forward wakeup to smc socket waitqueue after fallback") Signed-off-by: Wen Gu <[email protected]> Acked-by: Karsten Graul <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2022-04-25tcp: make sure treq->af_specific is initializedEric Dumazet2-2/+9
syzbot complained about a recent change in TCP stack, hitting a NULL pointer [1] tcp request sockets have an af_specific pointer, which was used before the blamed change only for SYNACK generation in non SYNCOOKIE mode. tcp requests sockets momentarily created when third packet coming from client in SYNCOOKIE mode were not using treq->af_specific. Make sure this field is populated, in the same way normal TCP requests sockets do in tcp_conn_request(). [1] TCP: request_sock_TCPv6: Possible SYN flooding on port 20002. Sending cookies. Check SNMP counters. general protection fault, probably for non-canonical address 0xdffffc0000000001: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f] CPU: 1 PID: 3695 Comm: syz-executor864 Not tainted 5.18.0-rc3-syzkaller-00224-g5fd1fe4807f9 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:tcp_create_openreq_child+0xe16/0x16b0 net/ipv4/tcp_minisocks.c:534 Code: 48 c1 ea 03 80 3c 02 00 0f 85 e5 07 00 00 4c 8b b3 28 01 00 00 48 b8 00 00 00 00 00 fc ff df 49 8d 7e 08 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 c9 07 00 00 48 8b 3c 24 48 89 de 41 ff 56 08 48 RSP: 0018:ffffc90000de0588 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: ffff888076490330 RCX: 0000000000000100 RDX: 0000000000000001 RSI: ffffffff87d67ff0 RDI: 0000000000000008 RBP: ffff88806ee1c7f8 R08: 0000000000000000 R09: 0000000000000000 R10: ffffffff87d67f00 R11: 0000000000000000 R12: ffff88806ee1bfc0 R13: ffff88801b0e0368 R14: 0000000000000000 R15: 0000000000000000 FS: 00007f517fe58700(0000) GS:ffff8880b9d00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007ffcead76960 CR3: 000000006f97b000 CR4: 00000000003506e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <IRQ> tcp_v6_syn_recv_sock+0x199/0x23b0 net/ipv6/tcp_ipv6.c:1267 tcp_get_cookie_sock+0xc9/0x850 net/ipv4/syncookies.c:207 cookie_v6_check+0x15c3/0x2340 net/ipv6/syncookies.c:258 tcp_v6_cookie_check net/ipv6/tcp_ipv6.c:1131 [inline] tcp_v6_do_rcv+0x1148/0x13b0 net/ipv6/tcp_ipv6.c:1486 tcp_v6_rcv+0x3305/0x3840 net/ipv6/tcp_ipv6.c:1725 ip6_protocol_deliver_rcu+0x2e9/0x1900 net/ipv6/ip6_input.c:422 ip6_input_finish+0x14c/0x2c0 net/ipv6/ip6_input.c:464 NF_HOOK include/linux/netfilter.h:307 [inline] NF_HOOK include/linux/netfilter.h:301 [inline] ip6_input+0x9c/0xd0 net/ipv6/ip6_input.c:473 dst_input include/net/dst.h:461 [inline] ip6_rcv_finish net/ipv6/ip6_input.c:76 [inline] NF_HOOK include/linux/netfilter.h:307 [inline] NF_HOOK include/linux/netfilter.h:301 [inline] ipv6_rcv+0x27f/0x3b0 net/ipv6/ip6_input.c:297 __netif_receive_skb_one_core+0x114/0x180 net/core/dev.c:5405 __netif_receive_skb+0x24/0x1b0 net/core/dev.c:5519 process_backlog+0x3a0/0x7c0 net/core/dev.c:5847 __napi_poll+0xb3/0x6e0 net/core/dev.c:6413 napi_poll net/core/dev.c:6480 [inline] net_rx_action+0x8ec/0xc60 net/core/dev.c:6567 __do_softirq+0x29b/0x9c2 kernel/softirq.c:558 invoke_softirq kernel/softirq.c:432 [inline] __irq_exit_rcu+0x123/0x180 kernel/softirq.c:637 irq_exit_rcu+0x5/0x20 kernel/softirq.c:649 sysvec_apic_timer_interrupt+0x93/0xc0 arch/x86/kernel/apic/apic.c:1097 Fixes: 5b0b9e4c2c89 ("tcp: md5: incorrect tcp_header_len for incoming connections") Signed-off-by: Eric Dumazet <[email protected]> Cc: Francesco Ruggeri <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-04-25net: dsa: remove unused headersMarcin Wojtas1-9/+0
Reduce a number of included headers to a necessary minimum. Signed-off-by: Marcin Wojtas <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-04-25tcp: fix potential xmit stalls caused by TCP_NOTSENT_LOWATEric Dumazet2-1/+12
I had this bug sitting for too long in my pile, it is time to fix it. Thanks to Doug Porter for reminding me of it! We had various attempts in the past, including commit 0cbe6a8f089e ("tcp: remove SOCK_QUEUE_SHRUNK"), but the issue is that TCP stack currently only generates EPOLLOUT from input path, when tp->snd_una has advanced and skb(s) cleaned from rtx queue. If a flow has a big RTT, and/or receives SACKs, it is possible that the notsent part (tp->write_seq - tp->snd_nxt) reaches 0 and no more data can be sent until tp->snd_una finally advances. What is needed is to also check if POLLOUT needs to be generated whenever tp->snd_nxt is advanced, from output path. This bug triggers more often after an idle period, as we do not receive ACK for at least one RTT. tcp_notsent_lowat could be a fraction of what CWND and pacing rate would allow to send during this RTT. In a followup patch, I will remove the bogus call to tcp_chrono_stop(sk, TCP_CHRONO_SNDBUF_LIMITED) from tcp_check_space(). Fact that we have decided to generate an EPOLLOUT does not mean the application has immediately refilled the transmit queue. This optimistic call might have been the reason the bug seemed not too serious. Tested: 200 ms rtt, 1% packet loss, 32 MB tcp_rmem[2] and tcp_wmem[2] $ echo 500000 >/proc/sys/net/ipv4/tcp_notsent_lowat $ cat bench_rr.sh SUM=0 for i in {1..10} do V=`netperf -H remote_host -l30 -t TCP_RR -- -r 10000000,10000 -o LOCAL_BYTES_SENT | egrep -v "MIGRATED|Bytes"` echo $V SUM=$(($SUM + $V)) done echo SUM=$SUM Before patch: $ bench_rr.sh 130000000 80000000 140000000 140000000 140000000 140000000 130000000 40000000 90000000 110000000 SUM=1140000000 After patch: $ bench_rr.sh 430000000 590000000 530000000 450000000 450000000 350000000 450000000 490000000 480000000 460000000 SUM=4680000000 # This is 410 % of the value before patch. Fixes: c9bee3b7fdec ("tcp: TCP_NOTSENT_LOWAT socket option") Signed-off-by: Eric Dumazet <[email protected]> Reported-by: Doug Porter <[email protected]> Cc: Soheil Hassas Yeganeh <[email protected]> Cc: Neal Cardwell <[email protected]> Acked-by: Soheil Hassas Yeganeh <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-04-25arp: fix unused variable warnning when CONFIG_PROC_FS=nYajun Deng1-5/+2
net/ipv4/arp.c:1412:36: warning: unused variable 'arp_seq_ops' [-Wunused-const-variable] Add #ifdef CONFIG_PROC_FS for 'arp_seq_ops'. Fixes: e968b1b3e9b8 ("arp: Remove #ifdef CONFIG_PROC_FS") Reported-by: kernel test robot <[email protected]> Signed-off-by: Yajun Deng <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-04-25net: dsa: flood multicast to CPU when slave has IFF_PROMISCVladimir Oltean1-1/+1
Certain DSA switches can eliminate flooding to the CPU when none of the ports have the IFF_ALLMULTI or IFF_PROMISC flags set. This is done by synthesizing a call to dsa_port_bridge_flags() for the CPU port, a call which normally comes from the bridge driver via switchdev. The bridge port flags and IFF_PROMISC|IFF_ALLMULTI have slightly different semantics, and due to inattention/lack of proper testing, the IFF_PROMISC flag allows unknown unicast to be flooded to the CPU, but not unknown multicast. This must be fixed by setting both BR_FLOOD (unicast) and BR_MCAST_FLOOD in the synthesized dsa_port_bridge_flags() call, since IFF_PROMISC means that packets should not be filtered regardless of their MAC DA. Fixes: 7569459a52c9 ("net: dsa: manage flooding on the CPU ports") Signed-off-by: Vladimir Oltean <[email protected]> Reviewed-by: Florian Fainelli <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-04-25ip_gre, ip6_gre: Fix race condition on o_seqno in collect_md modePeilin Ye2-6/+7
As pointed out by Jakub Kicinski, currently using TUNNEL_SEQ in collect_md mode is racy for [IP6]GRE[TAP] devices. Consider the following sequence of events: 1. An [IP6]GRE[TAP] device is created in collect_md mode using "ip link add ... external". "ip" ignores "[o]seq" if "external" is specified, so TUNNEL_SEQ is off, and the device is marked as NETIF_F_LLTX (i.e. it uses lockless TX); 2. Someone sets TUNNEL_SEQ on outgoing skb's, using e.g. bpf_skb_set_tunnel_key() in an eBPF program attached to this device; 3. gre_fb_xmit() or __gre6_xmit() processes these skb's: gre_build_header(skb, tun_hlen, flags, protocol, tunnel_id_to_key32(tun_info->key.tun_id), (flags & TUNNEL_SEQ) ? htonl(tunnel->o_seqno++) : 0); ^^^^^^^^^^^^^^^^^ Since we are not using the TX lock (&txq->_xmit_lock), multiple CPUs may try to do this tunnel->o_seqno++ in parallel, which is racy. Fix it by making o_seqno atomic_t. As mentioned by Eric Dumazet in commit b790e01aee74 ("ip_gre: lockless xmit"), making o_seqno atomic_t increases "chance for packets being out of order at receiver" when NETIF_F_LLTX is on. Maybe a better fix would be: 1. Do not ignore "oseq" in external mode. Users MUST specify "oseq" if they want the kernel to allow sequencing of outgoing packets; 2. Reject all outgoing TUNNEL_SEQ packets if the device was not created with "oseq". Unfortunately, that would break userspace. We could now make [IP6]GRE[TAP] devices always NETIF_F_LLTX, but let us do it in separate patches to keep this fix minimal. Suggested-by: Jakub Kicinski <[email protected]> Fixes: 77a5196a804e ("gre: add sequence number for collect md mode.") Signed-off-by: Peilin Ye <[email protected]> Acked-by: William Tu <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-04-25ip6_gre: Make o_seqno start from 0 in native modePeilin Ye1-6/+5
For IP6GRE and IP6GRETAP devices, currently o_seqno starts from 1 in native mode. According to RFC 2890 2.2., "The first datagram is sent with a sequence number of 0." Fix it. It is worth mentioning that o_seqno already starts from 0 in collect_md mode, see the "if (tunnel->parms.collect_md)" clause in __gre6_xmit(), where tunnel->o_seqno is passed to gre_build_header() before getting incremented. Fixes: c12b395a4664 ("gre: Support GRE over IPv6") Signed-off-by: Peilin Ye <[email protected]> Acked-by: William Tu <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-04-25ip_gre: Make o_seqno start from 0 in native modePeilin Ye1-5/+3
For GRE and GRETAP devices, currently o_seqno starts from 1 in native mode. According to RFC 2890 2.2., "The first datagram is sent with a sequence number of 0." Fix it. It is worth mentioning that o_seqno already starts from 0 in collect_md mode, see gre_fb_xmit(), where tunnel->o_seqno is passed to gre_build_header() before getting incremented. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Peilin Ye <[email protected]> Acked-by: William Tu <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-04-25net/smc: sync err code when tcp connection was refusedliuyacan1-0/+2
In the current implementation, when TCP initiates a connection to an unavailable [ip,port], ECONNREFUSED will be stored in the TCP socket, but SMC will not. However, some apps (like curl) use getsockopt(,,SO_ERROR,,) to get the error information, which makes them miss the error message and behave strangely. Fixes: 50717a37db03 ("net/smc: nonblocking connect rework") Signed-off-by: liuyacan <[email protected]> Reviewed-by: Tony Lu <[email protected]> Acked-by: Karsten Graul <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-04-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nfDavid S. Miller4-4/+14
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for net: 1) Fix incorrect printing of memory size of IPVS connection hash table, from Pengcheng Yang. 2) Fix spurious EEXIST errors in nft_set_rbtree. 3) Remove leftover empty flowtable file, from Rongguang Wei. 4) Fix ip6_route_me_harder() with vrf driver, from Martin Willi. ==================== Signed-off-by: David S. Miller <[email protected]>
2022-04-25devlink: introduce line card device info infrastructureJiri Pirko1-1/+70
Extend the line card info message with information (e.g., FW version) about devices found on the line card. Example: $ devlink lc info pci/0000:01:00.0 lc 8 pci/0000:01:00.0: lc 8 versions: fixed: hw.revision 0 running: ini.version 4 devices: device 0 versions: running: fw 19.2010.1310 device 1 versions: running: fw 19.2010.1310 device 2 versions: running: fw 19.2010.1310 device 3 versions: running: fw 19.2010.1310 Signed-off-by: Jiri Pirko <[email protected]> Signed-off-by: Ido Schimmel <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-04-25devlink: introduce line card info get messageJiri Pirko1-4/+126
Allow the driver to provide per line card info get op to fill-up info, similar to the "devlink dev info". Example: $ devlink lc info pci/0000:01:00.0 lc 8 pci/0000:01:00.0: lc 8 versions: fixed: hw.revision 0 running: ini.version 4 Signed-off-by: Jiri Pirko <[email protected]> Signed-off-by: Ido Schimmel <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-04-25devlink: introduce line card devices supportJiri Pirko1-1/+103
Line card can contain one or more devices that makes sense to make visible to the user. For example, this can be a gearbox with flash memory, which could be updated. Provide the driver possibility to attach such devices to a line card and expose those to user. Example: $ devlink lc show pci/0000:01:00.0 lc 8 pci/0000:01:00.0: lc 8 state active type 16x100G supported_types: 16x100G devices: device 0 device 1 device 2 device 3 Signed-off-by: Jiri Pirko <[email protected]> Signed-off-by: Ido Schimmel <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-04-25netfilter: Update ip6_route_me_harder to consider L3 domainMartin Willi1-2/+8
The commit referenced below fixed packet re-routing if Netfilter mangles a routing key property of a packet and the packet is routed in a VRF L3 domain. The fix, however, addressed IPv4 re-routing, only. This commit applies the same behavior for IPv6. While at it, untangle the nested ternary operator to make the code more readable. Fixes: 6d8b49c3a3a3 ("netfilter: Update ip_route_me_harder to consider L3 domain") Cc: [email protected] Signed-off-by: Martin Willi <[email protected]> Reviewed-by: David Ahern <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]>
2022-04-25libceph: disambiguate cluster/pool full log messageIlya Dryomov1-1/+5
Signed-off-by: Ilya Dryomov <[email protected]>
2022-04-25netfilter: flowtable: Remove the empty fileRongguang Wei1-0/+0
CONFIG_NF_FLOW_TABLE_IPV4 is already removed and the real user is also removed(nf_flow_table_ipv4.c is empty). Fixes: c42ba4290b2147aa ("netfilter: flowtable: remove ipv4/ipv6 modules") Signed-off-by: Pablo Neira Ayuso <[email protected]>
2022-04-24net: add __sys_socket_file()Jens Axboe1-10/+42
This works like __sys_socket(), except instead of allocating and returning a socket fd, it just returns the file associated with the socket. No fd is installed into the process file table. This is similar to do_accept(), and allows io_uring to use this without instantiating a file descriptor in the process file table. Signed-off-by: Jens Axboe <[email protected]> Acked-by: David S. Miller <[email protected]> Link: https://lore.kernel.org/r/[email protected]
Powered by cgit, Gruvboxed by Blaster4385.