aboutsummaryrefslogtreecommitdiff
path: root/net
AgeCommit message (Collapse)AuthorFilesLines
2020-11-14netlabel: fix an uninitialized warning in netlbl_unlabel_staticlist()Paul Moore1-1/+1
Static checking revealed that a previous fix to netlbl_unlabel_staticlist() leaves a stack variable uninitialized, this patches fixes that. Fixes: 866358ec331f ("netlabel: fix our progress tracking in netlbl_unlabel_staticlist()") Reported-by: Dan Carpenter <[email protected]> Signed-off-by: Paul Moore <[email protected]> Reviewed-by: James Morris <[email protected]> Link: https://lore.kernel.org/r/160530304068.15651.18355773009751195447.stgit@sifl Signed-off-by: Jakub Kicinski <[email protected]>
2020-11-14sctp: change to hold/put transport for proto_unreach_timerXin Long3-5/+5
A call trace was found in Hangbin's Codenomicon testing with debug kernel: [ 2615.981988] ODEBUG: free active (active state 0) object type: timer_list hint: sctp_generate_proto_unreach_event+0x0/0x3a0 [sctp] [ 2615.995050] WARNING: CPU: 17 PID: 0 at lib/debugobjects.c:328 debug_print_object+0x199/0x2b0 [ 2616.095934] RIP: 0010:debug_print_object+0x199/0x2b0 [ 2616.191533] Call Trace: [ 2616.194265] <IRQ> [ 2616.202068] debug_check_no_obj_freed+0x25e/0x3f0 [ 2616.207336] slab_free_freelist_hook+0xeb/0x140 [ 2616.220971] kfree+0xd6/0x2c0 [ 2616.224293] rcu_do_batch+0x3bd/0xc70 [ 2616.243096] rcu_core+0x8b9/0xd00 [ 2616.256065] __do_softirq+0x23d/0xacd [ 2616.260166] irq_exit+0x236/0x2a0 [ 2616.263879] smp_apic_timer_interrupt+0x18d/0x620 [ 2616.269138] apic_timer_interrupt+0xf/0x20 [ 2616.273711] </IRQ> This is because it holds asoc when transport->proto_unreach_timer starts and puts asoc when the timer stops, and without holding transport the transport could be freed when the timer is still running. So fix it by holding/putting transport instead for proto_unreach_timer in transport, just like other timers in transport. v1->v2: - Also use sctp_transport_put() for the "out_unlock:" path in sctp_generate_proto_unreach_event(), as Marcelo noticed. Fixes: 50b5d6ad6382 ("sctp: Fix a race between ICMP protocol unreachable and connect()") Reported-by: Hangbin Liu <[email protected]> Signed-off-by: Xin Long <[email protected]> Acked-by: Marcelo Ricardo Leitner <[email protected]> Link: https://lore.kernel.org/r/102788809b554958b13b95d33440f5448113b8d6.1605331373.git.lucien.xin@gmail.com Signed-off-by: Jakub Kicinski <[email protected]>
2020-11-14vsock: forward all packets to the host when no H2G is registeredStefano Garzarella1-1/+1
Before commit c0cfa2d8a788 ("vsock: add multi-transports support"), if a G2H transport was loaded (e.g. virtio transport), every packets was forwarded to the host, regardless of the destination CID. The H2G transports implemented until then (vhost-vsock, VMCI) always responded with an error, if the destination CID was not VMADDR_CID_HOST. From that commit, we are using the remote CID to decide which transport to use, so packets with remote CID > VMADDR_CID_HOST(2) are sent only through H2G transport. If no H2G is available, packets are discarded directly in the guest. Some use cases (e.g. Nitro Enclaves [1]) rely on the old behaviour to implement sibling VMs communication, so we restore the old behavior when no H2G is registered. It will be up to the host to discard packets if the destination is not the right one. As it was already implemented before adding multi-transport support. Tested with nested QEMU/KVM by me and Nitro Enclaves by Andra. [1] Documentation/virt/ne_overview.rst Cc: Jorgen Hansen <[email protected]> Cc: Dexuan Cui <[email protected]> Fixes: c0cfa2d8a788 ("vsock: add multi-transports support") Reported-by: Andra Paraschiv <[email protected]> Tested-by: Andra Paraschiv <[email protected]> Signed-off-by: Stefano Garzarella <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2020-11-13ipv6: Fix error path to cancel the meseageZhang Qilong1-2/+6
genlmsg_cancel() needs to be called in the error path of inet6_fill_ifmcaddr and inet6_fill_ifacaddr to cancel the message. Fixes: 6ecf4c37eb3e ("ipv6: enable IFA_TARGET_NETNSID for RTM_GETADDR") Reported-by: Hulk Robot <[email protected]> Signed-off-by: Zhang Qilong <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2020-11-13net: Exempt multicast addresses from five-second neighbor lifetimeJeff Dike3-0/+15
Commit 58956317c8de ("neighbor: Improve garbage collection") guarantees neighbour table entries a five-second lifetime. Processes which make heavy use of multicast can fill the neighour table with multicast addresses in five seconds. At that point, neighbour entries can't be GC-ed because they aren't five seconds old yet, the kernel log starts to fill up with "neighbor table overflow!" messages, and sends start to fail. This patch allows multicast addresses to be thrown out before they've lived out their five seconds. This makes room for non-multicast addresses and makes messages to all addresses more reliable in these circumstances. Fixes: 58956317c8de ("neighbor: Improve garbage collection") Signed-off-by: Jeff Dike <[email protected]> Reviewed-by: David Ahern <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2020-11-13Merge tag 'mac80211-for-net-2020-11-13' of ↵Jakub Kicinski5-43/+20
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== A handful of fixes: * a use-after-free fix in rfkill * a memory leak fix in the mac80211 TX status path * some rate scaling fixes * a fix for the often-reported (by syzbot) sleeping in atomic issue with mac80211's station removal * tag 'mac80211-for-net-2020-11-13' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211: mac80211: free sta in sta_info_insert_finish() on errors mac80211: minstrel: fix tx status processing corner case mac80211: minstrel: remove deferred sampling code mac80211: fix memory leak on filtered powersave frames rfkill: Fix use-after-free in rfkill_resume() ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2020-11-13mac80211: free sta in sta_info_insert_finish() on errorsJohannes Berg1-10/+4
If sta_info_insert_finish() fails, we currently keep the station around and free it only in the caller, but there's only one such caller and it always frees it immediately. As syzbot found, another consequence of this split is that we can put things that sleep only into __cleanup_single_sta() and not in sta_info_free(), but this is the only place that requires such of sta_info_free() now. Change this to free the station in sta_info_insert_finish(), in which case we can still sleep. This will also let us unify the cleanup code later. Cc: [email protected] Fixes: dcd479e10a05 ("mac80211: always wind down STA state") Reported-by: [email protected] Reported-by: [email protected] Reported-by: [email protected] Reported-by: [email protected] Reported-by: [email protected] Reported-by: [email protected] Link: https://lore.kernel.org/r/20201112112201.ee6b397b9453.I9c31d667a0ea2151441cc64ed6613d36c18a48e0@changeid Signed-off-by: Johannes Berg <[email protected]>
2020-11-12net: x25: Increase refcnt of "struct x25_neigh" in x25_rx_call_requestXie He1-0/+1
The x25_disconnect function in x25_subr.c would decrease the refcount of "x25->neighbour" (struct x25_neigh) and reset this pointer to NULL. However, the x25_rx_call_request function in af_x25.c, which is called when we receive a connection request, does not increase the refcount when it assigns the pointer. Fix this issue by increasing the refcount of "struct x25_neigh" in x25_rx_call_request. This patch fixes frequent kernel crashes when using AF_X25 sockets. Fixes: 4becb7ee5b3d ("net/x25: Fix x25_neigh refcnt leak when x25 disconnect") Cc: Martin Schiller <[email protected]> Signed-off-by: Xie He <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2020-11-12net/ncsi: Fix netlink registrationJoel Stanley3-27/+3
If a user unbinds and re-binds a NC-SI aware driver the kernel will attempt to register the netlink interface at runtime. The structure is marked __ro_after_init so registration fails spectacularly at this point. # echo 1e660000.ethernet > /sys/bus/platform/drivers/ftgmac100/unbind # echo 1e660000.ethernet > /sys/bus/platform/drivers/ftgmac100/bind ftgmac100 1e660000.ethernet: Read MAC address 52:54:00:12:34:56 from chip ftgmac100 1e660000.ethernet: Using NCSI interface 8<--- cut here --- Unable to handle kernel paging request at virtual address 80a8f858 pgd = 8c768dd6 [80a8f858] *pgd=80a0841e(bad) Internal error: Oops: 80d [#1] SMP ARM CPU: 0 PID: 116 Comm: sh Not tainted 5.10.0-rc3-next-20201111-00003-gdd25b227ec1e #51 Hardware name: Generic DT based system PC is at genl_register_family+0x1f8/0x6d4 LR is at 0xff26ffff pc : [<8073f930>] lr : [<ff26ffff>] psr: 20000153 sp : 8553bc80 ip : 81406244 fp : 8553bd04 r10: 8085d12c r9 : 80a8f73c r8 : 85739000 r7 : 00000017 r6 : 80a8f860 r5 : 80c8ab98 r4 : 80a8f858 r3 : 00000000 r2 : 00000000 r1 : 81406130 r0 : 00000017 Flags: nzCv IRQs on FIQs off Mode SVC_32 ISA ARM Segment none Control: 00c5387d Table: 85524008 DAC: 00000051 Process sh (pid: 116, stack limit = 0x1f1988d6) ... Backtrace: [<8073f738>] (genl_register_family) from [<80860ac0>] (ncsi_init_netlink+0x20/0x48) r10:8085d12c r9:80c8fb0c r8:85739000 r7:00000000 r6:81218000 r5:85739000 r4:8121c000 [<80860aa0>] (ncsi_init_netlink) from [<8085d740>] (ncsi_register_dev+0x1b0/0x210) r5:8121c400 r4:8121c000 [<8085d590>] (ncsi_register_dev) from [<805a8060>] (ftgmac100_probe+0x6e0/0x778) r10:00000004 r9:80950228 r8:8115bc10 r7:8115ab00 r6:9eae2c24 r5:813b6f88 r4:85739000 [<805a7980>] (ftgmac100_probe) from [<805355ec>] (platform_drv_probe+0x58/0xa8) r9:80c76bb0 r8:00000000 r7:80cd4974 r6:80c76bb0 r5:8115bc10 r4:00000000 [<80535594>] (platform_drv_probe) from [<80532d58>] (really_probe+0x204/0x514) r7:80cd4974 r6:00000000 r5:80cd4868 r4:8115bc10 Jakub pointed out that ncsi_register_dev is obviously broken, because there is only one family so it would never work if there was more than one ncsi netdev. Fix the crash by registering the netlink family once on boot, and drop the code to unregister it. Fixes: 955dc68cb9b2 ("net/ncsi: Add generic netlink family") Signed-off-by: Joel Stanley <[email protected]> Reviewed-by: Samuel Mendoza-Jonas <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2020-11-12Merge tag 'net-5.10-rc4' of ↵Linus Torvalds15-28/+86
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Current release - regressions: - arm64: dts: fsl-ls1028a-kontron-sl28: specify in-band mode for ENETC Current release - bugs in new features: - mptcp: provide rmem[0] limit offset to fix oops Previous release - regressions: - IPv6: Set SIT tunnel hard_header_len to zero to fix path MTU calculations - lan743x: correctly handle chips with internal PHY - bpf: Don't rely on GCC __attribute__((optimize)) to disable GCSE - mlx5e: Fix VXLAN port table synchronization after function reload Previous release - always broken: - bpf: Zero-fill re-used per-cpu map element - fix out-of-order UDP packets when forwarding with UDP GSO fraglists turned on: - fix UDP header access on Fast/frag0 UDP GRO - fix IP header access and skb lookup on Fast/frag0 UDP GRO - ethtool: netlink: add missing netdev_features_change() call - net: Update window_clamp if SOCK_RCVBUF is set - igc: Fix returning wrong statistics - ch_ktls: fix multiple leaks and corner cases in Chelsio TLS offload - tunnels: Fix off-by-one in lower MTU bounds for ICMP/ICMPv6 replies - r8169: disable hw csum for short packets on all chip versions - vrf: Fix fast path output packet handling with async Netfilter rules" * tag 'net-5.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (65 commits) lan743x: fix use of uninitialized variable net: udp: fix IP header access and skb lookup on Fast/frag0 UDP GRO net: udp: fix UDP header access on Fast/frag0 UDP GRO devlink: Avoid overwriting port attributes of registered port vrf: Fix fast path output packet handling with async Netfilter rules cosa: Add missing kfree in error path of cosa_write net: switch to the kernel.org patchwork instance ch_ktls: stop the txq if reaches threshold ch_ktls: tcb update fails sometimes ch_ktls/cxgb4: handle partial tag alone SKBs ch_ktls: don't free skb before sending FIN ch_ktls: packet handling prior to start marker ch_ktls: Correction in middle record handling ch_ktls: missing handling of header alone ch_ktls: Correction in trimmed_len calculation cxgb4/ch_ktls: creating skbs causes panic ch_ktls: Update cheksum information ch_ktls: Correction in finding correct length cxgb4/ch_ktls: decrypted bit is not enough net/x25: Fix null-ptr-deref in x25_connect ...
2020-11-12net: udp: fix IP header access and skb lookup on Fast/frag0 UDP GROAlexander Lobakin2-4/+30
udp{4,6}_lib_lookup_skb() use ip{,v6}_hdr() to get IP header of the packet. While it's probably OK for non-frag0 paths, this helpers will also point to junk on Fast/frag0 GRO when all headers are located in frags. As a result, sk/skb lookup may fail or give wrong results. To support both GRO modes, skb_gro_network_header() might be used. To not modify original functions, add private versions of udp{4,6}_lib_lookup_skb() only to perform correct sk lookups on GRO. Present since the introduction of "application-level" UDP GRO in 4.7-rc1. Misc: replace totally unneeded ternaries with plain ifs. Fixes: a6024562ffd7 ("udp: Add GRO functions to UDP socket") Suggested-by: Willem de Bruijn <[email protected]> Cc: Eric Dumazet <[email protected]> Signed-off-by: Alexander Lobakin <[email protected]> Acked-by: Willem de Bruijn <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2020-11-12net: udp: fix UDP header access on Fast/frag0 UDP GROAlexander Lobakin1-1/+1
UDP GRO uses udp_hdr(skb) in its .gro_receive() callback. While it's probably OK for non-frag0 paths (when all headers or even the entire frame are already in skb head), this inline points to junk when using Fast GRO (napi_gro_frags() or napi_gro_receive() with only Ethernet header in skb head and all the rest in the frags) and breaks GRO packet compilation and the packet flow itself. To support both modes, skb_gro_header_fast() + skb_gro_header_slow() are typically used. UDP even has an inline helper that makes use of them, udp_gro_udphdr(). Use that instead of troublemaking udp_hdr() to get rid of the out-of-order delivers. Present since the introduction of plain UDP GRO in 5.0-rc1. Fixes: e20cf8d3f1f7 ("udp: implement GRO for plain UDP sockets.") Cc: Eric Dumazet <[email protected]> Signed-off-by: Alexander Lobakin <[email protected]> Acked-by: Willem de Bruijn <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2020-11-12devlink: Avoid overwriting port attributes of registered portParav Pandit1-2/+6
Cited commit in fixes tag overwrites the port attributes for the registered port. Avoid such error by checking registered flag before setting attributes. Fixes: 71ad8d55f8e5 ("devlink: Replace devlink_port_attrs_set parameters with a struct") Signed-off-by: Parav Pandit <[email protected]> Reviewed-by: Jiri Pirko <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2020-11-12mac80211: minstrel: fix tx status processing corner caseFelix Fietkau1-1/+1
Some drivers fill the status rate list without setting the rate index after the final rate to -1. minstrel_ht already deals with this, but minstrel doesn't, which causes it to get stuck at the lowest rate on these drivers. Fix this by checking the count as well. Cc: [email protected] Fixes: cccf129f820e ("mac80211: add the 'minstrel' rate control algorithm") Signed-off-by: Felix Fietkau <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Johannes Berg <[email protected]>
2020-11-12mac80211: minstrel: remove deferred sampling codeFelix Fietkau2-22/+4
Deferring sampling attempts to the second stage has some bad interactions with drivers that process the rate table in hardware and use the probe flag to indicate probing packets (e.g. most mt76 drivers). On affected drivers it can lead to probing not working at all. If the link conditions turn worse, it might not be such a good idea to do a lot of sampling for lower rates in this case. Fix this by simply skipping the sample attempt instead of deferring it, but keep the checks that would allow it to be sampled if it was skipped too often, but only if it has less than 95% success probability. Also ensure that IEEE80211_TX_CTL_RATE_CTRL_PROBE is set for all probing packets. Cc: [email protected] Fixes: cccf129f820e ("mac80211: add the 'minstrel' rate control algorithm") Signed-off-by: Felix Fietkau <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Johannes Berg <[email protected]>
2020-11-12mac80211: fix memory leak on filtered powersave framesFelix Fietkau1-10/+8
After the status rework, ieee80211_tx_status_ext is leaking un-acknowledged packets for stations in powersave mode. To fix this, move the code handling those packets from __ieee80211_tx_status into ieee80211_tx_status_ext Reported-by: Tobias Waldvogel <[email protected]> Fixes: 3318111cf63d ("mac80211: reduce duplication in tx status functions") Signed-off-by: Felix Fietkau <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Johannes Berg <[email protected]>
2020-11-12rfkill: Fix use-after-free in rfkill_resume()Claire Chang1-0/+3
If a device is getting removed or reprobed during resume, use-after-free might happen. For example, h5_btrtl_resume() schedules a work queue for device reprobing, which of course requires removal first. If the removal happens in parallel with the device_resume() and wins the race to acquire device_lock(), removal may remove the device from the PM lists and all, but device_resume() is already running and will continue when the lock can be acquired, thus calling rfkill_resume(). During this, if rfkill_set_block() is then called after the corresponding *_unregister() and kfree() are called, there will be an use-after-free in hci_rfkill_set_block(): BUG: KASAN: use-after-free in hci_rfkill_set_block+0x58/0xc0 [bluetooth] ... Call trace: dump_backtrace+0x0/0x154 show_stack+0x20/0x2c dump_stack+0xbc/0x12c print_address_description+0x88/0x4b0 __kasan_report+0x144/0x168 kasan_report+0x10/0x18 check_memory_region+0x19c/0x1ac __kasan_check_write+0x18/0x24 hci_rfkill_set_block+0x58/0xc0 [bluetooth] rfkill_set_block+0x9c/0x120 rfkill_resume+0x34/0x70 dpm_run_callback+0xf0/0x1f4 device_resume+0x210/0x22c Fix this by checking rfkill->registered in rfkill_resume(). device_del() in rfkill_unregister() requires device_lock() and the whole rfkill_resume() is also protected by the same lock via device_resume(), we can make sure either the rfkill->registered is false before rfkill_resume() starts or the rfkill device won't be unregistered before rfkill_resume() returns. As async_resume() holds a reference to the device, at this level there can be no use-after-free; only in the user that doesn't expect this scenario. Fixes: 8589086f4efd ("Bluetooth: hci_h5: Turn off RTL8723BS on suspend, reprobe on resume") Signed-off-by: Claire Chang <[email protected]> Link: https://lore.kernel.org/r/[email protected] [edit commit message for clarity and add more info provided later] Signed-off-by: Johannes Berg <[email protected]>
2020-11-11net/x25: Fix null-ptr-deref in x25_connectMartin Schiller1-1/+1
This fixes a regression for blocking connects introduced by commit 4becb7ee5b3d ("net/x25: Fix x25_neigh refcnt leak when x25 disconnect"). The x25->neighbour is already set to "NULL" by x25_disconnect() now, while a blocking connect is waiting in x25_wait_for_connection_establishment(). Therefore x25->neighbour must not be accessed here again and x25->state is also already set to X25_STATE_0 by x25_disconnect(). Fixes: 4becb7ee5b3d ("net/x25: Fix x25_neigh refcnt leak when x25 disconnect") Signed-off-by: Martin Schiller <[email protected]> Reviewed-by: Xie He <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2020-11-11tipc: fix memory leak in tipc_topsrv_start()Wang Hai1-2/+8
kmemleak report a memory leak as follows: unreferenced object 0xffff88810a596800 (size 512): comm "ip", pid 21558, jiffies 4297568990 (age 112.120s) hex dump (first 32 bytes): 00 00 00 00 ad 4e ad de ff ff ff ff 00 00 00 00 .....N.......... ff ff ff ff ff ff ff ff 00 83 60 b0 ff ff ff ff ..........`..... backtrace: [<0000000022bbe21f>] tipc_topsrv_init_net+0x1f3/0xa70 [<00000000fe15ddf7>] ops_init+0xa8/0x3c0 [<00000000138af6f2>] setup_net+0x2de/0x7e0 [<000000008c6807a3>] copy_net_ns+0x27d/0x530 [<000000006b21adbd>] create_new_namespaces+0x382/0xa30 [<00000000bb169746>] unshare_nsproxy_namespaces+0xa1/0x1d0 [<00000000fe2e42bc>] ksys_unshare+0x39c/0x780 [<0000000009ba3b19>] __x64_sys_unshare+0x2d/0x40 [<00000000614ad866>] do_syscall_64+0x56/0xa0 [<00000000a1b5ca3c>] entry_SYSCALL_64_after_hwframe+0x44/0xa9 'srv' is malloced in tipc_topsrv_start() but not free before leaving from the error handling cases. We need to free it. Fixes: 5c45ab24ac77 ("tipc: make struct tipc_server private for server.c") Reported-by: Hulk Robot <[email protected]> Signed-off-by: Wang Hai <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2020-11-10net/af_iucv: fix null pointer dereference on shutdownUrsula Braun1-1/+2
syzbot reported the following KASAN finding: BUG: KASAN: nullptr-dereference in iucv_send_ctrl+0x390/0x3f0 net/iucv/af_iucv.c:385 Read of size 2 at addr 000000000000021e by task syz-executor907/519 CPU: 0 PID: 519 Comm: syz-executor907 Not tainted 5.9.0-syzkaller-07043-gbcf9877ad213 #0 Hardware name: IBM 3906 M04 701 (KVM/Linux) Call Trace: [<00000000c576af60>] unwind_start arch/s390/include/asm/unwind.h:65 [inline] [<00000000c576af60>] show_stack+0x180/0x228 arch/s390/kernel/dumpstack.c:135 [<00000000c9dcd1f8>] __dump_stack lib/dump_stack.c:77 [inline] [<00000000c9dcd1f8>] dump_stack+0x268/0x2f0 lib/dump_stack.c:118 [<00000000c5fed016>] print_address_description.constprop.0+0x5e/0x218 mm/kasan/report.c:383 [<00000000c5fec82a>] __kasan_report mm/kasan/report.c:517 [inline] [<00000000c5fec82a>] kasan_report+0x11a/0x168 mm/kasan/report.c:534 [<00000000c98b5b60>] iucv_send_ctrl+0x390/0x3f0 net/iucv/af_iucv.c:385 [<00000000c98b6262>] iucv_sock_shutdown+0x44a/0x4c0 net/iucv/af_iucv.c:1457 [<00000000c89d3a54>] __sys_shutdown+0x12c/0x1c8 net/socket.c:2204 [<00000000c89d3b70>] __do_sys_shutdown net/socket.c:2212 [inline] [<00000000c89d3b70>] __s390x_sys_shutdown+0x38/0x48 net/socket.c:2210 [<00000000c9e36eac>] system_call+0xe0/0x28c arch/s390/kernel/entry.S:415 There is nothing to shutdown if a connection has never been established. Besides that iucv->hs_dev is not yet initialized if a socket is in IUCV_OPEN state and iucv->path is not yet initialized if socket is in IUCV_BOUND state. So, just skip the shutdown calls for a socket in these states. Fixes: eac3731bd04c ("[S390]: Add AF_IUCV socket support") Fixes: 82492a355fac ("af_iucv: add shutdown for HS transport") Reviewed-by: Vasily Gorbik <[email protected]> Signed-off-by: Ursula Braun <[email protected]> [jwi: correct one Fixes tag] Signed-off-by: Julian Wiedmann <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2020-11-10net: Update window_clamp if SOCK_RCVBUF is setMao Wenan2-4/+15
When net.ipv4.tcp_syncookies=1 and syn flood is happened, cookie_v4_check or cookie_v6_check tries to redo what tcp_v4_send_synack or tcp_v6_send_synack did, rsk_window_clamp will be changed if SOCK_RCVBUF is set, which will make rcv_wscale is different, the client still operates with initial window scale and can overshot granted window, the client use the initial scale but local server use new scale to advertise window value, and session work abnormally. Fixes: e88c64f0a425 ("tcp: allow effective reduction of TCP's rcv-buffer via setsockopt") Signed-off-by: Mao Wenan <[email protected]> Signed-off-by: Eric Dumazet <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2020-11-10netlabel: fix our progress tracking in netlbl_unlabel_staticlist()Paul Moore1-5/+12
The current NetLabel code doesn't correctly keep track of the netlink dump state in some cases, in particular when multiple interfaces with large configurations are loaded. The problem manifests itself by not reporting the full configuration to userspace, even though it is loaded and active in the kernel. This patch fixes this by ensuring that the dump state is properly reset when necessary inside the netlbl_unlabel_staticlist() function. Fixes: 8cc44579d1bd ("NetLabel: Introduce static network labels for unlabeled connections") Signed-off-by: Paul Moore <[email protected]> Link: https://lore.kernel.org/r/160484450633.3752.16512718263560813473.stgit@sifl Signed-off-by: Jakub Kicinski <[email protected]>
2020-11-10net: xfrm: fix memory leak in xfrm_user_policy()Yu Kuai1-1/+3
if xfrm_get_translator() failed, xfrm_user_policy() return without freeing 'data', which is allocated in memdup_sockptr(). Fixes: 96392ee5a13b ("xfrm/compat: Translate 32-bit user_policy from sockptr") Reported-by: Hulk Robot <[email protected]> Signed-off-by: Yu Kuai <[email protected]> Signed-off-by: Steffen Klassert <[email protected]>
2020-11-09mptcp: provide rmem[0] limitPaolo Abeni1-0/+1
The mptcp proto struct currently does not provide the required limit for forward memory scheduling. Under pressure sk_rmem_schedule() will unconditionally try to use such field and will oops. Address the issue inheriting the tcp limit, as we already do for the wmem one. Fixes: 9c3f94e1681b ("mptcp: add missing memory scheduling in the rx path") Signed-off-by: Paolo Abeni <[email protected]> Reviewed-by: Matthieu Baerts <[email protected]> Link: https://lore.kernel.org/r/37af798bd46f402fb7c79f57ebbdd00614f5d7fa.1604861097.git.pabeni@redhat.com Signed-off-by: Jakub Kicinski <[email protected]>
2020-11-09ethtool: netlink: add missing netdev_features_change() callAlexander Lobakin1-1/+1
After updating userspace Ethtool from 5.7 to 5.9, I noticed that NETDEV_FEAT_CHANGE is no more raised when changing netdev features through Ethtool. That's because the old Ethtool ioctl interface always calls netdev_features_change() at the end of user request processing to inform the kernel that our netdevice has some features changed, but the new Netlink interface does not. Instead, it just notifies itself with ETHTOOL_MSG_FEATURES_NTF. Replace this ethtool_notify() call with netdev_features_change(), so the kernel will be aware of any features changes, just like in case with the ioctl interface. This does not omit Ethtool notifications, as Ethtool itself listens to NETDEV_FEAT_CHANGE and drops ETHTOOL_MSG_FEATURES_NTF on it (net/ethtool/netlink.c:ethnl_netdev_event()). From v1 [1]: - dropped extra new line as advised by Jakub; - no functional changes. [1] https://lore.kernel.org/netdev/[email protected] Fixes: 0980bfcd6954 ("ethtool: set netdev features with FEATURES_SET request") Signed-off-by: Alexander Lobakin <[email protected]> Reviewed-by: Michal Kubecek <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2020-11-09tunnels: Fix off-by-one in lower MTU bounds for ICMP/ICMPv6 repliesStefano Brivio1-2/+2
Jianlin reports that a bridged IPv6 VXLAN endpoint, carrying IPv6 packets over a link with a PMTU estimation of exactly 1350 bytes, won't trigger ICMPv6 Packet Too Big replies when the encapsulated datagrams exceed said PMTU value. VXLAN over IPv6 adds 70 bytes of overhead, so an ICMPv6 reply indicating 1280 bytes as inner MTU would be legitimate and expected. This comes from an off-by-one error I introduced in checks added as part of commit 4cb47a8644cc ("tunnels: PMTU discovery support for directly bridged IP packets"), whose purpose was to prevent sending ICMPv6 Packet Too Big messages with an MTU lower than the smallest permissible IPv6 link MTU, i.e. 1280 bytes. In iptunnel_pmtud_check_icmpv6(), avoid triggering a reply only if the advertised MTU would be less than, and not equal to, 1280 bytes. Also fix the analogous comparison for IPv4, that is, skip the ICMP reply only if the resulting MTU is strictly less than 576 bytes. This becomes apparent while running the net/pmtu.sh bridged VXLAN or GENEVE selftests with adjusted lower-link MTU values. Using e.g. GENEVE, setting ll_mtu to the values reported below, in the test_pmtu_ipvX_over_bridged_vxlanY_or_geneveY_exception() test function, we can see failures on the following tests: test | ll_mtu -------------------------------|-------- pmtu_ipv4_br_geneve4_exception | 626 pmtu_ipv6_br_geneve4_exception | 1330 pmtu_ipv6_br_geneve6_exception | 1350 owing to the different tunneling overheads implied by the corresponding configurations. Reported-by: Jianlin Shi <[email protected]> Fixes: 4cb47a8644cc ("tunnels: PMTU discovery support for directly bridged IP packets") Signed-off-by: Stefano Brivio <[email protected]> Link: https://lore.kernel.org/r/4f5fc2f33bfdf8409549fafd4f952b008bf04d63.1604681709.git.sbrivio@redhat.com Signed-off-by: Jakub Kicinski <[email protected]>
2020-11-09IPv6: Set SIT tunnel hard_header_len to zeroOliver Herms1-2/+0
Due to the legacy usage of hard_header_len for SIT tunnels while already using infrastructure from net/ipv4/ip_tunnel.c the calculation of the path MTU in tnl_update_pmtu is incorrect. This leads to unnecessary creation of MTU exceptions for any flow going over a SIT tunnel. As SIT tunnels do not have a header themsevles other than their transport (L3, L2) headers we're leaving hard_header_len set to zero as tnl_update_pmtu is already taking care of the transport headers sizes. This will also help avoiding unnecessary IPv6 GC runs and spinlock contention seen when using SIT tunnels and for more than net.ipv6.route.gc_thresh flows. Fixes: c54419321455 ("GRE: Refactor GRE tunneling code.") Signed-off-by: Oliver Herms <[email protected]> Acked-by: Willem de Bruijn <[email protected]> Link: https://lore.kernel.org/r/20201103104133.GA1573211@tws Signed-off-by: Jakub Kicinski <[email protected]>
2020-11-09Merge tag 'nfsd-5.10-1' of git://linux-nfs.org/~bfields/linuxLinus Torvalds1-4/+5
Pull nfsd fixes from Bruce Fields: "This is mainly server-to-server copy and fallout from Chuck's 5.10 rpc refactoring" * tag 'nfsd-5.10-1' of git://linux-nfs.org/~bfields/linux: net/sunrpc: fix useless comparison in proc_do_xprt() net/sunrpc: return 0 on attempt to write to "transports" NFSD: fix missing refcount in nfsd4_copy by nfsd4_do_async_copy NFSD: Fix use-after-free warning when doing inter-server copy NFSD: MKNOD should return NFSERR_BADTYPE instead of NFSERR_INVAL SUNRPC: Fix general protection fault in trace_rpc_xdr_overflow() NFSD: NFSv3 PATHCONF Reply is improperly formed
2020-11-09xfrm/compat: Don't allocate memory with __GFP_ZERODmitry Safonov1-1/+1
32-bit to 64-bit messages translator zerofies needed paddings in the translation, the rest is the actual payload. Don't allocate zero pages as they are not needed. Fixes: 5106f4a8acff ("xfrm/compat: Add 32=>64-bit messages translator") Signed-off-by: Dmitry Safonov <[email protected]> Signed-off-by: Steffen Klassert <[email protected]>
2020-11-09xfrm/compat: memset(0) 64-bit padding at right placeDmitry Safonov1-1/+1
32-bit messages translated by xfrm_compat can have attributes attached. For all, but XFRMA_SA, XFRMA_POLICY the size of payload is the same in 32-bit UABI and 64-bit UABI. For XFRMA_SA (struct xfrm_usersa_info) and XFRMA_POLICY (struct xfrm_userpolicy_info) it's only tail-padding that is present in 64-bit payload, but not in 32-bit. The proper size for destination nlattr is already calculated by xfrm_user_rcv_calculate_len64() and allocated with kvmalloc(). xfrm_attr_cpy32() copies 32-bit copy_len into 64-bit attribute translated payload, zero-filling possible padding for SA/POLICY. Due to a typo, *pos already has 64-bit payload size, in a result next memset(0) is called on the memory after the translated attribute, not on the tail-padding of it. Fixes: 5106f4a8acff ("xfrm/compat: Add 32=>64-bit messages translator") Reported-by: [email protected] Signed-off-by: Dmitry Safonov <[email protected]> Signed-off-by: Steffen Klassert <[email protected]>
2020-11-09xfrm/compat: Translate by copying XFRMA_UNSPEC attributeDmitry Safonov1-0/+1
xfrm_xlate32() translates 64-bit message provided by kernel to be sent for 32-bit listener (acknowledge or monitor). Translator code doesn't expect XFRMA_UNSPEC attribute as it doesn't know its payload. Kernel never attaches such attribute, but a user can. I've searched if any opensource does it and the answer is no. Nothing on github and google finds only tfcproject that has such code commented-out. What will happen if a user sends a netlink message with XFRMA_UNSPEC attribute? Ipsec code ignores this attribute. But if there is a monitor-process or 32-bit user requested ack - kernel will try to translate such message and will hit WARN_ONCE() in xfrm_xlate64_attr(). Deal with XFRMA_UNSPEC by copying the attribute payload with xfrm_nla_cpy(). In result, the default switch-case in xfrm_xlate64_attr() becomes an unused code. Leave those 3 lines in case a new xfrm attribute will be added. Fixes: 5461fc0c8d9f ("xfrm/compat: Add 64=>32-bit messages translator") Reported-by: [email protected] Signed-off-by: Dmitry Safonov <[email protected]> Signed-off-by: Steffen Klassert <[email protected]>
2020-11-08net/sunrpc: fix useless comparison in proc_do_xprt()Dan Carpenter1-3/+4
In the original code, the "if (*lenp < 0)" check didn't work because "*lenp" is unsigned. Fortunately, the memory_read_from_buffer() call will never fail in this context so it doesn't affect runtime. Signed-off-by: Dan Carpenter <[email protected]> Signed-off-by: J. Bruce Fields <[email protected]>
2020-11-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfJakub Kicinski2-3/+7
Alexei Starovoitov says: ==================== pull-request: bpf 2020-11-06 1) Pre-allocated per-cpu hashmap needs to zero-fill reused element, from David. 2) Tighten bpf_lsm function check, from KP. 3) Fix bpftool attaching to flow dissector, from Lorenz. 4) Use -fno-gcse for the whole kernel/bpf/core.c instead of function attribute, from Ard. * git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: bpf: Update verification logic for LSM programs bpf: Zero-fill re-used per-cpu map element bpf: BPF_PRELOAD depends on BPF_SYSCALL tools/bpftool: Fix attaching flow dissector libbpf: Fix possible use after free in xsk_socket__delete libbpf: Fix null dereference in xsk_socket__delete libbpf, hashmap: Fix undefined behavior in hash_bits bpf: Don't rely on GCC __attribute__((optimize)) to disable GCSE tools, bpftool: Remove two unused variables. tools, bpftool: Avoid array index warnings. xsk: Fix possible memory leak at socket close bpf: Add struct bpf_redir_neigh forward declaration to BPF helper defs samples/bpf: Set rlimit for memlock to infinity in all samples bpf: Fix -Wshadow warnings selftest/bpf: Fix profiler test using CO-RE relocation for enums ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2020-11-06net/sunrpc: return 0 on attempt to write to "transports"Dan Carpenter1-1/+1
You can't write to this file because the permissions are 0444. But it sort of looked like you could do a write and it would result in a read. Then it looked like proc_sys_call_handler() just ignored it. Which is confusing. It's more clear if the "write" just returns zero. Also, the "lenp" pointer is never NULL so that check can be removed. Signed-off-by: Dan Carpenter <[email protected]> Signed-off-by: J. Bruce Fields <[email protected]>
2020-11-06Merge tag 'net-5.10-rc3' of ↵Linus Torvalds38-126/+239
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Networking fixes for 5.10-rc3, including fixes from wireless, can, and netfilter subtrees. Current merge window - bugs in new features: - can: isotp: isotp_rcv_cf(): enable RX timeout handling in listen-only mode Previous releases - regressions: - mac80211: - don't require VHT elements for HE on 2.4 GHz - fix regression where EAPOL frames were sent in plaintext - netfilter: - ipset: Update byte and packet counters regardless of whether they match - ip_tunnel: fix over-mtu packet send by allowing fragmenting even if inner packet has IP_DF (don't fragment) set in its header (when TUNNEL_DONT_FRAGMENT flag is not set on the tunnel dev) - net: fec: fix MDIO probing for some FEC hardware blocks - ip6_tunnel: set inner ipproto before ip6_tnl_encap to un-break gso support - sctp: Fix COMM_LOST/CANT_STR_ASSOC err reporting on big-endian platforms, sparse-related fix used the wrong integer size Previous releases - always broken: - netfilter: use actual socket sk rather than skb sk when routing harder - r8169: work around short packet hw bug on RTL8125 by padding frames - net: ethernet: ti: cpsw: disable PTPv1 hw timestamping advertisement, the hardware does not support it - chelsio/chtls: fix always leaking ctrl_skb and another leak caused by a race condition - fix drivers incorrectly writing into skbs on TX: - cadence: force nonlinear buffers to be cloned - gianfar: Account for Tx PTP timestamp in the skb headroom - gianfar: Replace skb_realloc_headroom with skb_cow_head for PTP - can: flexcan: - remove FLEXCAN_QUIRK_DISABLE_MECR quirk for LS1021A - add ECC initialization for VF610 and LX2160A - flexcan_remove(): disable wakeup completely - can: fix packet echo functionality: - peak_canfd: fix echo management when loopback is on - make sure skbs are not freed in IRQ context in case they need to be dropped - always clone the skbs to make sure they have a reference on the socket, and prevent it from disappearing - fix real payload length return value for RTR frames - can: j1939: return failure on bind if netdev is down, rather than waiting indefinitely Misc: - IPv6: reply ICMP error if the first fragment don't include all headers to improve compliance with RFC 8200" * tag 'net-5.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (66 commits) ionic: check port ptr before use r8169: work around short packet hw bug on RTL8125 net: openvswitch: silence suspicious RCU usage warning chelsio/chtls: fix always leaking ctrl_skb chelsio/chtls: fix memory leaks caused by a race can: flexcan: flexcan_remove(): disable wakeup completely can: flexcan: add ECC initialization for VF610 can: flexcan: add ECC initialization for LX2160A can: flexcan: remove FLEXCAN_QUIRK_DISABLE_MECR quirk for LS1021A can: mcp251xfd: remove unneeded break can: mcp251xfd: mcp251xfd_regmap_nocrc_read(): fix semicolon.cocci warnings can: mcp251xfd: mcp251xfd_regmap_crc_read(): increase severity of CRC read error messages can: peak_canfd: pucan_handle_can_rx(): fix echo management when loopback is on can: peak_usb: peak_usb_get_ts_time(): fix timestamp wrapping can: peak_usb: add range checking in decode operations can: xilinx_can: handle failure cases of pm_runtime_get_sync can: ti_hecc: ti_hecc_probe(): add missed clk_disable_unprepare() in error path can: isotp: padlen(): make const array static, makes object smaller can: isotp: isotp_rcv_cf(): enable RX timeout handling in listen-only mode can: isotp: Explain PDU in CAN_ISOTP help text ...
2020-11-04Merge tag 'linux-can-fixes-for-5.10-20201103' of ↵Jakub Kicinski4-16/+27
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2020-11-03 The first two patches are by Oleksij Rempel and they add a generic can-controller Device Tree yaml binding and convert the text based binding of the flexcan driver to a yaml based binding. Zhang Changzhong's patch fixes a remove_proc_entry warning in the AF_CAN core. A patch by me fixes a kfree_skb() call from IRQ context in the rx-offload helper. Vincent Mailhol contributes a patch to prevent a call to kfree_skb() in hard IRQ context in can_get_echo_skb(). Oliver Hartkopp's patch fixes the length calculation for RTR CAN frames in the __can_get_echo_skb() helper. Oleksij Rempel's patch fixes a use-after-free that shows up with j1939 in can_create_echo_skb(). Yegor Yefremov contributes 4 patches to enhance the j1939 documentation. Zhang Changzhong's patch fixes a hanging task problem in j1939_sk_bind() if the netdev is down. Then there are three patches for the newly added CAN_ISOTP protocol. Geert Uytterhoeven enhances the kconfig help text. Oliver Hartkopp's patch adds missing RX timeout handling in listen-only mode and Colin Ian King's patch decreases the generated object code by 926 bytes. Zhang Changzhong contributes a patch for the ti_hecc driver that fixes the error path in the probe function. Navid Emamdoost's patch for the xilinx_can driver fixes the error handling in case of failing pm_runtime_get_sync(). There are two patches for the peak_usb driver. Dan Carpenter adds range checking in decode operations and Stephane Grosjean's patch fixes a timestamp wrapping problem. Stephane Grosjean's patch for th peak_canfd driver fixes echo management if loopback is on. The next three patches all target the mcp251xfd driver. The first one is by me and it increased the severity of CRC read error messages. The kernel test robot removes an unneeded semicolon and Tom Rix removes unneeded break in several switch-cases. The last 4 patches are by Joakim Zhang and target the flexcan driver, the first three fix ECC related device specific quirks for the LS1021A, LX2160A and the VF610 SoC. The last patch disable wakeup completely upon driver remove. * tag 'linux-can-fixes-for-5.10-20201103' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can: (27 commits) can: flexcan: flexcan_remove(): disable wakeup completely can: flexcan: add ECC initialization for VF610 can: flexcan: add ECC initialization for LX2160A can: flexcan: remove FLEXCAN_QUIRK_DISABLE_MECR quirk for LS1021A can: mcp251xfd: remove unneeded break can: mcp251xfd: mcp251xfd_regmap_nocrc_read(): fix semicolon.cocci warnings can: mcp251xfd: mcp251xfd_regmap_crc_read(): increase severity of CRC read error messages can: peak_canfd: pucan_handle_can_rx(): fix echo management when loopback is on can: peak_usb: peak_usb_get_ts_time(): fix timestamp wrapping can: peak_usb: add range checking in decode operations can: xilinx_can: handle failure cases of pm_runtime_get_sync can: ti_hecc: ti_hecc_probe(): add missed clk_disable_unprepare() in error path can: isotp: padlen(): make const array static, makes object smaller can: isotp: isotp_rcv_cf(): enable RX timeout handling in listen-only mode can: isotp: Explain PDU in CAN_ISOTP help text can: j1939: j1939_sk_bind(): return failure if netdev is down can: j1939: use backquotes for code samples can: j1939: swap addr and pgn in the send example can: j1939: fix syntax and spelling can: j1939: rename jacd tool ... ==================== Link: https://lore.kernel.org/r/<[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2020-11-04Merge branch 'master' of ↵Jakub Kicinski4-11/+13
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec Steffen Klassert says: ==================== 1) Fix packet receiving of standard IP tunnels when the xfrm_interface module is installed. From Xin Long. 2) Fix a race condition between spi allocating and hash list resizing. From zhuoliang zhang. ==================== Signed-off-by: Jakub Kicinski <[email protected]>
2020-11-03net: openvswitch: silence suspicious RCU usage warningEelco Chaudron2-8/+8
Silence suspicious RCU usage warning in ovs_flow_tbl_masks_cache_resize() by replacing rcu_dereference() with rcu_dereference_ovsl(). In addition, when creating a new datapath, make sure it's configured under the ovs_lock. Fixes: 9bf24f594c6a ("net: openvswitch: make masks cache size configurable") Reported-by: [email protected] Signed-off-by: Eelco Chaudron <[email protected]> Link: https://lore.kernel.org/r/160439190002.56943.1418882726496275961.stgit@ebuild Signed-off-by: Jakub Kicinski <[email protected]>
2020-11-03can: isotp: padlen(): make const array static, makes object smallerColin Ian King1-8/+10
Don't populate the const array plen on the stack but instead it static. Makes the object code smaller by 926 bytes. Before: text data bss dec hex filename 26531 1943 64 28538 6f7a net/can/isotp.o After: text data bss dec hex filename 25509 2039 64 27612 6bdc net/can/isotp.o (gcc version 10.2.0) Signed-off-by: Colin Ian King <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Marc Kleine-Budde <[email protected]>
2020-11-03can: isotp: isotp_rcv_cf(): enable RX timeout handling in listen-only modeOliver Hartkopp1-4/+4
As reported by Thomas Wagner: https://github.com/hartkopp/can-isotp/issues/34 the timeout handling for data frames is not enabled when the isotp socket is used in listen-only mode (sockopt CAN_ISOTP_LISTEN_MODE). This mode is enabled by the isotpsniffer application which therefore became inconsistend with the strict rx timeout rules when running the isotp protocol in the operational mode. This patch fixes this inconsistency by moving the return condition for the listen-only mode behind the timeout handling code. Reported-by: Thomas Wagner <[email protected]> Signed-off-by: Oliver Hartkopp <[email protected]> Fixes: e057dd3fc20f ("can: add ISO 15765-2:2016 transport protocol") Link: https://github.com/hartkopp/can-isotp/issues/34 Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Marc Kleine-Budde <[email protected]>
2020-11-03can: isotp: Explain PDU in CAN_ISOTP help textGeert Uytterhoeven1-2/+3
The help text for the CAN_ISOTP config symbol uses the acronym "PDU". However, this acronym is not explained here, nor in Documentation/networking/can.rst. Expand the acronym to make it easier for users to decide if they need to enable the CAN_ISOTP option or not. Signed-off-by: Geert Uytterhoeven <[email protected]> Link: https://lore.kernel.org/r/[email protected] Acked-by: Oliver Hartkopp <[email protected]> Signed-off-by: Marc Kleine-Budde <[email protected]>
2020-11-03can: j1939: j1939_sk_bind(): return failure if netdev is downZhang Changzhong1-0/+6
When a netdev down event occurs after a successful call to j1939_sk_bind(), j1939_netdev_notify() can handle it correctly. But if the netdev already in down state before calling j1939_sk_bind(), j1939_sk_release() will stay in wait_event_interruptible() blocked forever. Because in this case, j1939_netdev_notify() won't be called and j1939_tp_txtimer() won't call j1939_session_cancel() or other function to clear session for ENETDOWN error, this lead to mismatch of j1939_session_get/put() and jsk->skb_pending will never decrease to zero. To reproduce it use following commands: 1. ip link add dev vcan0 type vcan 2. j1939acd -r 100,80-120 1122334455667788 vcan0 3. presses ctrl-c and thread will be blocked forever This patch adds check for ndev->flags in j1939_sk_bind() to avoid this kind of situation and return with -ENETDOWN. Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol") Signed-off-by: Zhang Changzhong <[email protected]> Link: https://lore.kernel.org/r/[email protected] Acked-by: Oleksij Rempel <[email protected]> Signed-off-by: Marc Kleine-Budde <[email protected]>
2020-11-03can: proc: can_remove_proc(): silence remove_proc_entry warningZhang Changzhong1-2/+4
If can_init_proc() fail to create /proc/net/can directory, can_remove_proc() will trigger a warning: WARNING: CPU: 6 PID: 7133 at fs/proc/generic.c:672 remove_proc_entry+0x17b0 Kernel panic - not syncing: panic_on_warn set ... Fix to return early from can_remove_proc() if can proc_dir does not exists. Signed-off-by: Zhang Changzhong <[email protected]> Link: https://lore.kernel.org/r/[email protected] Fixes: 8e8cda6d737d ("can: initial support for network namespaces") Acked-by: Oliver Hartkopp <[email protected]> Signed-off-by: Marc Kleine-Budde <[email protected]>
2020-11-03mptcp: token: fix unititialized variableDavide Caratti1-1/+1
gcc complains about use of uninitialized 'num'. Fix it by doing the first assignment of 'num' when the variable is declared. Fixes: 96d890daad05 ("mptcp: add msk interations helper") Signed-off-by: Davide Caratti <[email protected]> Acked-by: Paolo Abeni <[email protected]> Link: https://lore.kernel.org/r/49e20da5d467a73414d4294a8bd35e2cb1befd49.1604308087.git.dcaratti@redhat.com Signed-off-by: Jakub Kicinski <[email protected]>
2020-11-02sctp: Fix COMM_LOST/CANT_STR_ASSOC err reporting on big-endian platformsPetr Malat1-2/+2
Commit 978aa0474115 ("sctp: fix some type cast warnings introduced since very beginning")' broke err reading from sctp_arg, because it reads the value as 32-bit integer, although the value is stored as 16-bit integer. Later this value is passed to the userspace in 16-bit variable, thus the user always gets 0 on big-endian platforms. Fix it by reading the __u16 field of sctp_arg union, as reading err field would produce a sparse warning. Fixes: 978aa0474115 ("sctp: fix some type cast warnings introduced since very beginning") Signed-off-by: Petr Malat <[email protected]> Acked-by: Marcelo Ricardo Leitner <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2020-11-02Merge tag 'mac80211-for-net-2020-10-30' of ↵Jakub Kicinski8-48/+93
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== A couple of fixes, for * HE on 2.4 GHz * a few issues syzbot found, but we have many more reports :-( * a regression in nl80211-transported EAPOL frames which had affected a number of users, from Mathy * kernel-doc markings in mac80211, from Mauro * a format argument in reg.c, from Ye Bin ==================== Signed-off-by: Jakub Kicinski <[email protected]>
2020-10-31Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfJakub Kicinski13-30/+52
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for net: 1) Incorrect netlink report logic in flowtable and genID. 2) Add a selftest to check that wireguard passes the right sk to ip_route_me_harder, from Jason A. Donenfeld. 3) Pass the actual sk to ip_route_me_harder(), also from Jason. 4) Missing expression validation of updates via nft --check. 5) Update byte and packet counters regardless of whether they match, from Stefano Brivio. ==================== Signed-off-by: Jakub Kicinski <[email protected]>
2020-10-31ip_tunnel: fix over-mtu packet send fail without TUNNEL_DONT_FRAGMENT flagswenxu1-3/+0
The tunnel device such as vxlan, bareudp and geneve in the lwt mode set the outer df only based TUNNEL_DONT_FRAGMENT. And this was also the behavior for gre device before switching to use ip_md_tunnel_xmit in commit 962924fa2b7a ("ip_gre: Refactor collect metatdata mode tunnel xmit to ip_md_tunnel_xmit") When the ip_gre in lwt mode xmit with ip_md_tunnel_xmi changed the rule and make the discrepancy between handling of DF by different tunnels. So in the ip_md_tunnel_xmit should follow the same rule like other tunnels. Fixes: cfc7381b3002 ("ip_tunnel: add collect_md mode to IPIP tunnel") Signed-off-by: wenxu <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2020-10-31Merge tag 'flexible-array-conversions-5.10-rc2' of ↵Linus Torvalds2-3/+4
git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux Pull more flexible-array member conversions from Gustavo A. R. Silva: "Replace zero-length arrays with flexible-array members" * tag 'flexible-array-conversions-5.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux: printk: ringbuffer: Replace zero-length array with flexible-array member net/smc: Replace zero-length array with flexible-array member net/mlx5: Replace zero-length array with flexible-array member mei: hw: Replace zero-length array with flexible-array member gve: Replace zero-length array with flexible-array member Bluetooth: btintel: Replace zero-length array with flexible-array member scsi: target: tcmu: Replace zero-length array with flexible-array member ima: Replace zero-length array with flexible-array member enetc: Replace zero-length array with flexible-array member fs: Replace zero-length array with flexible-array member Bluetooth: Replace zero-length array with flexible-array member params: Replace zero-length array with flexible-array member tracepoint: Replace zero-length array with flexible-array member platform/chrome: cros_ec_proto: Replace zero-length array with flexible-array member platform/chrome: cros_ec_commands: Replace zero-length array with flexible-array member mailbox: zynqmp-ipi-message: Replace zero-length array with flexible-array member dmaengine: ti-cppi5: Replace zero-length array with flexible-array member
2020-10-31IPv6: reply ICMP error if the first fragment don't include all headersHangbin Liu2-2/+39
Based on RFC 8200, Section 4.5 Fragment Header: - If the first fragment does not include all headers through an Upper-Layer header, then that fragment should be discarded and an ICMP Parameter Problem, Code 3, message should be sent to the source of the fragment, with the Pointer field set to zero. Checking each packet header in IPv6 fast path will have performance impact, so I put the checking in ipv6_frag_rcv(). As the packet may be any kind of L4 protocol, I only checked some common protocols' header length and handle others by (offset + 1) > skb->len. Also use !(frag_off & htons(IP6_OFFSET)) to catch atomic fragments (fragmented packet with only one fragment). When send ICMP error message, if the 1st truncated fragment is ICMP message, icmp6_send() will break as is_ineligible() return true. So I added a check in is_ineligible() to let fragment packet with nexthdr ICMP but no ICMP header return false. Signed-off-by: Hangbin Liu <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.