aboutsummaryrefslogtreecommitdiff
path: root/net
AgeCommit message (Collapse)AuthorFilesLines
2013-10-17tcp: remove the sk_can_gso() check from tcp_set_skb_tso_segs()Eric Dumazet1-2/+1
sk_can_gso() should only be used as a hint in tcp_sendmsg() to build GSO packets in the first place. (As a performance hint) Once we have GSO packets in write queue, we can not decide they are no longer GSO only because flow now uses a route which doesn't handle TSO/GSO. Core networking stack handles the case very well for us, all we need is keeping track of packet counts in MSS terms, regardless of segmentation done later (in GSO or hardware) Right now, if tcp_fragment() splits a GSO packet in two parts, @left and @right, and route changed through a non GSO device, both @left and @right have pcount set to 1, which is wrong, and leads to incorrect packet_count tracking. This problem was added in commit d5ac99a648 ("[TCP]: skb pcount with MTU discovery") Signed-off-by: Eric Dumazet <[email protected]> Signed-off-by: Neal Cardwell <[email protected]> Signed-off-by: Yuchung Cheng <[email protected]> Reported-by: Maciej Żenczykowski <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2013-10-17tcp: must unclone packets before mangling themEric Dumazet1-3/+6
TCP stack should make sure it owns skbs before mangling them. We had various crashes using bnx2x, and it turned out gso_size was cleared right before bnx2x driver was populating TC descriptor of the _previous_ packet send. TCP stack can sometime retransmit packets that are still in Qdisc. Of course we could make bnx2x driver more robust (using ACCESS_ONCE(shinfo->gso_size) for example), but the bug is TCP stack. We have identified two points where skb_unclone() was needed. This patch adds a WARN_ON_ONCE() to warn us if we missed another fix of this kind. Kudos to Neal for finding the root cause of this bug. Its visible using small MSS. Signed-off-by: Eric Dumazet <[email protected]> Signed-off-by: Neal Cardwell <[email protected]> Cc: Yuchung Cheng <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2013-10-17Merge branch 'for-davem' of ↵David S. Miller10-5/+43
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless John W. Linville says: ==================== Please pull this batch of fixes intended for the 3.12 stream! For the mac80211 bits, Johannes says: "Jouni fixes a remain-on-channel vs. scan bug, and Felix fixes client TX probing on VLANs." And also: "This time I have two fixes from Emmanuel for RF-kill issues, and fixed two issues reported by Evan Huus and Thomas Lindroth respectively." On top of those... Avinash Patil adds a couple of mwifiex fixes to properly inform cfg80211 about some different types of disconnects, avoiding WARNINGs. Mark Cave-Ayland corrects a pointer arithmetic problem in rtlwifi, avoiding incorrect automatic gain calculations. Solomon Peachy sends a cw1200 fix for locking around calls to cw1200_irq_handler, addressing "lost interrupt" problems. Please let me know if there are problems! ==================== Signed-off-by: David S. Miller <[email protected]>
2013-10-17tcp: fix incorrect ca_state in tail loss probeYuchung Cheng1-1/+1
On receiving an ACK that covers the loss probe sequence, TLP immediately sets the congestion state to Open, even though some packets are not recovered and retransmisssion are on the way. The later ACks may trigger a WARN_ON check in step D of tcp_fastretrans_alert(), e.g., https://bugzilla.redhat.com/show_bug.cgi?id=989251 The fix is to follow the similar procedure in recovery by calling tcp_try_keep_open(). The sender switches to Open state if no packets are retransmissted. Otherwise it goes to Disorder and let subsequent ACKs move the state to Recovery or Open. Reported-By: Michael Sterrett <[email protected]> Tested-By: Dormando <[email protected]> Signed-off-by: Yuchung Cheng <[email protected]> Acked-by: Neal Cardwell <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2013-10-17sctp: Perform software checksum if packet has to be fragmented.Vlad Yasevich1-1/+1
IP/IPv6 fragmentation knows how to compute only TCP/UDP checksum. This causes problems if SCTP packets has to be fragmented and ipsummed has been set to PARTIAL due to checksum offload support. This condition can happen when retransmitting after MTU discover, or when INIT or other control chunks are larger then MTU. Check for the rare fragmentation condition in SCTP and use software checksum calculation in this case. CC: Fan Du <[email protected]> Signed-off-by: Vlad Yasevich <[email protected]> Acked-by: Neil Horman <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2013-10-17sctp: Use software crc32 checksum when xfrm transform will happen.Fan Du1-1/+2
igb/ixgbe have hardware sctp checksum support, when this feature is enabled and also IPsec is armed to protect sctp traffic, ugly things happened as xfrm_output checks CHECKSUM_PARTIAL to do checksum operation(sum every thing up and pack the 16bits result in the checksum field). The result is fail establishment of sctp communication. Cc: Neil Horman <[email protected]> Cc: Steffen Klassert <[email protected]> Signed-off-by: Fan Du <[email protected]> Signed-off-by: Vlad Yasevich <[email protected]> Acked-by: Neil Horman <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2013-10-16openvswitch: fix vport-netdev unregisterAlexei Starovoitov3-5/+19
The combination of two commits: commit 8e4e1713e4 ("openvswitch: Simplify datapath locking.") commit 2537b4dd0a ("openvswitch:: link upper device for port devices") introduced a bug where upper_dev wasn't unlinked upon netdev_unregister notification The following steps: modprobe openvswitch ovs-dpctl add-dp test ip tuntap add dev tap1 mode tap ovs-dpctl add-if test tap1 ip tuntap del dev tap1 mode tap are causing multiple warnings: [ 62.747557] gre: GRE over IPv4 demultiplexor driver [ 62.749579] openvswitch: Open vSwitch switching datapath [ 62.755087] device test entered promiscuous mode [ 62.765911] device tap1 entered promiscuous mode [ 62.766033] IPv6: ADDRCONF(NETDEV_UP): tap1: link is not ready [ 62.769017] ------------[ cut here ]------------ [ 62.769022] WARNING: CPU: 1 PID: 3267 at net/core/dev.c:5501 rollback_registered_many+0x20f/0x240() [ 62.769023] Modules linked in: openvswitch gre vxlan ip_tunnel libcrc32c ip6table_filter ip6_tables ebtable_nat ebtables nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack xt_CHECKSUM iptable_mangle ipt_REJECT xt_tcpudp iptable_filter ip_tables x_tables bridge stp llc vhost_net macvtap macvlan vhost kvm_intel kvm dm_crypt iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi hid_generic mxm_wmi eeepc_wmi asus_wmi sparse_keymap dm_multipath psmouse serio_raw usbhid hid parport_pc ppdev firewire_ohci lpc_ich firewire_core e1000e crc_itu_t binfmt_misc igb dca ptp pps_core mac_hid wmi lp parport i2o_config i2o_block video [ 62.769051] CPU: 1 PID: 3267 Comm: ip Not tainted 3.12.0-rc3+ #60 [ 62.769052] Hardware name: System manufacturer System Product Name/P8Z77 WS, BIOS 3007 07/26/2012 [ 62.769053] 0000000000000009 ffff8807f25cbd28 ffffffff8175e575 0000000000000006 [ 62.769055] 0000000000000000 ffff8807f25cbd68 ffffffff8105314c ffff8807f25cbd58 [ 62.769057] ffff8807f2634000 ffff8807f25cbdc8 ffff8807f25cbd88 ffff8807f25cbdc8 [ 62.769059] Call Trace: [ 62.769062] [<ffffffff8175e575>] dump_stack+0x55/0x76 [ 62.769065] [<ffffffff8105314c>] warn_slowpath_common+0x8c/0xc0 [ 62.769067] [<ffffffff8105319a>] warn_slowpath_null+0x1a/0x20 [ 62.769069] [<ffffffff8162a04f>] rollback_registered_many+0x20f/0x240 [ 62.769071] [<ffffffff8162a101>] rollback_registered+0x31/0x40 [ 62.769073] [<ffffffff8162a488>] unregister_netdevice_queue+0x58/0x90 [ 62.769075] [<ffffffff8154f900>] __tun_detach+0x140/0x340 [ 62.769077] [<ffffffff8154fb36>] tun_chr_close+0x36/0x60 [ 62.769080] [<ffffffff811bddaf>] __fput+0xff/0x260 [ 62.769082] [<ffffffff811bdf5e>] ____fput+0xe/0x10 [ 62.769084] [<ffffffff8107b515>] task_work_run+0xb5/0xe0 [ 62.769087] [<ffffffff810029b9>] do_notify_resume+0x59/0x80 [ 62.769089] [<ffffffff813a41fe>] ? trace_hardirqs_on_thunk+0x3a/0x3f [ 62.769091] [<ffffffff81770f5a>] int_signal+0x12/0x17 [ 62.769093] ---[ end trace 838756c62e156ffb ]--- [ 62.769481] ------------[ cut here ]------------ [ 62.769485] WARNING: CPU: 1 PID: 92 at fs/sysfs/inode.c:325 sysfs_hash_and_remove+0xa9/0xb0() [ 62.769486] sysfs: can not remove 'master', no directory [ 62.769486] Modules linked in: openvswitch gre vxlan ip_tunnel libcrc32c ip6table_filter ip6_tables ebtable_nat ebtables nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack xt_CHECKSUM iptable_mangle ipt_REJECT xt_tcpudp iptable_filter ip_tables x_tables bridge stp llc vhost_net macvtap macvlan vhost kvm_intel kvm dm_crypt iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi hid_generic mxm_wmi eeepc_wmi asus_wmi sparse_keymap dm_multipath psmouse serio_raw usbhid hid parport_pc ppdev firewire_ohci lpc_ich firewire_core e1000e crc_itu_t binfmt_misc igb dca ptp pps_core mac_hid wmi lp parport i2o_config i2o_block video [ 62.769514] CPU: 1 PID: 92 Comm: kworker/1:2 Tainted: G W 3.12.0-rc3+ #60 [ 62.769515] Hardware name: System manufacturer System Product Name/P8Z77 WS, BIOS 3007 07/26/2012 [ 62.769518] Workqueue: events ovs_dp_notify_wq [openvswitch] [ 62.769519] 0000000000000009 ffff880807ad3ac8 ffffffff8175e575 0000000000000006 [ 62.769521] ffff880807ad3b18 ffff880807ad3b08 ffffffff8105314c ffff880807ad3b28 [ 62.769523] 0000000000000000 ffffffff81a87a1f ffff8807f2634000 ffff880037038500 [ 62.769525] Call Trace: [ 62.769528] [<ffffffff8175e575>] dump_stack+0x55/0x76 [ 62.769529] [<ffffffff8105314c>] warn_slowpath_common+0x8c/0xc0 [ 62.769531] [<ffffffff81053236>] warn_slowpath_fmt+0x46/0x50 [ 62.769533] [<ffffffff8123e7e9>] sysfs_hash_and_remove+0xa9/0xb0 [ 62.769535] [<ffffffff81240e96>] sysfs_remove_link+0x26/0x30 [ 62.769538] [<ffffffff81631ef7>] __netdev_adjacent_dev_remove+0xf7/0x150 [ 62.769540] [<ffffffff81632037>] __netdev_adjacent_dev_unlink_lists+0x27/0x50 [ 62.769542] [<ffffffff8163213a>] __netdev_adjacent_dev_unlink_neighbour+0x3a/0x50 [ 62.769544] [<ffffffff8163218d>] netdev_upper_dev_unlink+0x3d/0x140 [ 62.769548] [<ffffffffa033c2db>] netdev_destroy+0x4b/0x80 [openvswitch] [ 62.769550] [<ffffffffa033b696>] ovs_vport_del+0x46/0x60 [openvswitch] [ 62.769552] [<ffffffffa0335314>] ovs_dp_detach_port+0x44/0x60 [openvswitch] [ 62.769555] [<ffffffffa0336574>] ovs_dp_notify_wq+0xb4/0x150 [openvswitch] [ 62.769557] [<ffffffff81075c28>] process_one_work+0x1d8/0x6a0 [ 62.769559] [<ffffffff81075bc8>] ? process_one_work+0x178/0x6a0 [ 62.769562] [<ffffffff8107659b>] worker_thread+0x11b/0x370 [ 62.769564] [<ffffffff81076480>] ? rescuer_thread+0x350/0x350 [ 62.769566] [<ffffffff8107f44a>] kthread+0xea/0xf0 [ 62.769568] [<ffffffff8107f360>] ? flush_kthread_worker+0x150/0x150 [ 62.769570] [<ffffffff81770bac>] ret_from_fork+0x7c/0xb0 [ 62.769572] [<ffffffff8107f360>] ? flush_kthread_worker+0x150/0x150 [ 62.769573] ---[ end trace 838756c62e156ffc ]--- [ 62.769574] ------------[ cut here ]------------ [ 62.769576] WARNING: CPU: 1 PID: 92 at fs/sysfs/inode.c:325 sysfs_hash_and_remove+0xa9/0xb0() [ 62.769577] sysfs: can not remove 'upper_test', no directory [ 62.769577] Modules linked in: openvswitch gre vxlan ip_tunnel libcrc32c ip6table_filter ip6_tables ebtable_nat ebtables nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack xt_CHECKSUM iptable_mangle ipt_REJECT xt_tcpudp iptable_filter ip_tables x_tables bridge stp llc vhost_net macvtap macvlan vhost kvm_intel kvm dm_crypt iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi hid_generic mxm_wmi eeepc_wmi asus_wmi sparse_keymap dm_multipath psmouse serio_raw usbhid hid parport_pc ppdev firewire_ohci lpc_ich firewire_core e1000e crc_itu_t binfmt_misc igb dca ptp pps_core mac_hid wmi lp parport i2o_config i2o_block video [ 62.769603] CPU: 1 PID: 92 Comm: kworker/1:2 Tainted: G W 3.12.0-rc3+ #60 [ 62.769604] Hardware name: System manufacturer System Product Name/P8Z77 WS, BIOS 3007 07/26/2012 [ 62.769606] Workqueue: events ovs_dp_notify_wq [openvswitch] [ 62.769607] 0000000000000009 ffff880807ad3ac8 ffffffff8175e575 0000000000000006 [ 62.769609] ffff880807ad3b18 ffff880807ad3b08 ffffffff8105314c ffff880807ad3b58 [ 62.769611] 0000000000000000 ffff880807ad3bd9 ffff8807f2634000 ffff880037038500 [ 62.769613] Call Trace: [ 62.769615] [<ffffffff8175e575>] dump_stack+0x55/0x76 [ 62.769617] [<ffffffff8105314c>] warn_slowpath_common+0x8c/0xc0 [ 62.769619] [<ffffffff81053236>] warn_slowpath_fmt+0x46/0x50 [ 62.769621] [<ffffffff8123e7e9>] sysfs_hash_and_remove+0xa9/0xb0 [ 62.769622] [<ffffffff81240e96>] sysfs_remove_link+0x26/0x30 [ 62.769624] [<ffffffff81631f22>] __netdev_adjacent_dev_remove+0x122/0x150 [ 62.769627] [<ffffffff81632037>] __netdev_adjacent_dev_unlink_lists+0x27/0x50 [ 62.769629] [<ffffffff8163213a>] __netdev_adjacent_dev_unlink_neighbour+0x3a/0x50 [ 62.769631] [<ffffffff8163218d>] netdev_upper_dev_unlink+0x3d/0x140 [ 62.769633] [<ffffffffa033c2db>] netdev_destroy+0x4b/0x80 [openvswitch] [ 62.769636] [<ffffffffa033b696>] ovs_vport_del+0x46/0x60 [openvswitch] [ 62.769638] [<ffffffffa0335314>] ovs_dp_detach_port+0x44/0x60 [openvswitch] [ 62.769640] [<ffffffffa0336574>] ovs_dp_notify_wq+0xb4/0x150 [openvswitch] [ 62.769642] [<ffffffff81075c28>] process_one_work+0x1d8/0x6a0 [ 62.769644] [<ffffffff81075bc8>] ? process_one_work+0x178/0x6a0 [ 62.769646] [<ffffffff8107659b>] worker_thread+0x11b/0x370 [ 62.769648] [<ffffffff81076480>] ? rescuer_thread+0x350/0x350 [ 62.769650] [<ffffffff8107f44a>] kthread+0xea/0xf0 [ 62.769652] [<ffffffff8107f360>] ? flush_kthread_worker+0x150/0x150 [ 62.769654] [<ffffffff81770bac>] ret_from_fork+0x7c/0xb0 [ 62.769656] [<ffffffff8107f360>] ? flush_kthread_worker+0x150/0x150 [ 62.769657] ---[ end trace 838756c62e156ffd ]--- [ 62.769724] device tap1 left promiscuous mode This patch also affects moving devices between net namespaces. OVS used to ignore netns move notifications which caused problems. Like: ovs-dpctl add-if test tap1 ip link set tap1 netns 3512 and then removing tap1 inside the namespace will cause hang on missing dev_put. With this patch OVS will detach dev upon receiving netns move event. Signed-off-by: Alexei Starovoitov <[email protected]> Signed-off-by: Jesse Gross <[email protected]>
2013-10-15Merge branch 'master' of ↵John W. Linville10-5/+43
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
2013-10-14Merge branch 'for-john' of ↵John W. Linville6-3/+35
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211
2013-10-14mac80211: fix crash if bitrate calculation goes wrongJohannes Berg1-0/+4
If a frame's timestamp is calculated, and the bitrate calculation goes wrong and returns zero, the system will attempt to divide by zero and crash. Catch this case and print the rate information that the driver reported when this happens. Cc: [email protected] Reported-by: Thomas Lindroth <[email protected]> Signed-off-by: Johannes Berg <[email protected]>
2013-10-14wireless: radiotap: fix parsing buffer overrunJohannes Berg1-1/+6
When parsing an invalid radiotap header, the parser can overrun the buffer that is passed in because it doesn't correctly check 1) the minimum radiotap header size 2) the space for extended bitmaps The first issue doesn't affect any in-kernel user as they all check the minimum size before calling the radiotap function. The second issue could potentially affect the kernel if an skb is passed in that consists only of the radiotap header with a lot of extended bitmaps that extend past the SKB. In that case a read-only buffer overrun by at most 4 bytes is possible. Fix this by adding the appropriate checks to the parser. Cc: [email protected] Reported-by: Evan Huus <[email protected]> Signed-off-by: Johannes Berg <[email protected]>
2013-10-11ipv6: Initialize ip6_tnl.hlen in gre tunnel even if no route is foundOussama Ghorbel1-2/+1
The ip6_tnl.hlen (gre and ipv6 headers length) is independent from the outgoing interface, so it would be better to initialize it even when no route is found, otherwise its value will be zero. While I'm not sure if this could happen in real life, but doing that will avoid to call the skb_push function with a zero in ip6gre_header function. Suggested-by: Hannes Frederic Sowa <[email protected]> Signed-off-by: Oussama Ghorbel <[email protected]> Acked-by: Hannes Frederic Sowa <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2013-10-11netem: free skb's in tree on resetstephen hemminger1-0/+16
Netem can leak memory because packets get stored in red-black tree and it is not cleared on reset. Reported by: Сергеев Сергей <[email protected]> Signed-off-by: Stephen Hemminger <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2013-10-11netem: update backlog after dropstephen hemminger1-0/+1
When packet is dropped from rb-tree netem the backlog statistic should also be updated. Reported-by: Сергеев Сергей <[email protected]> Signed-off-by: Stephen Hemminger <[email protected]> Acked-by: Eric Dumazet <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2013-10-11l2tp: must disable bh before calling l2tp_xmit_skb()Eric Dumazet1-0/+4
François Cachereul made a very nice bug report and suspected the bh_lock_sock() / bh_unlok_sock() pair used in l2tp_xmit_skb() from process context was not good. This problem was added by commit 6af88da14ee284aaad6e4326da09a89191ab6165 ("l2tp: Fix locking in l2tp_core.c"). l2tp_eth_dev_xmit() runs from BH context, so we must disable BH from other l2tp_xmit_skb() users. [ 452.060011] BUG: soft lockup - CPU#1 stuck for 23s! [accel-pppd:6662] [ 452.061757] Modules linked in: l2tp_ppp l2tp_netlink l2tp_core pppoe pppox ppp_generic slhc ipv6 ext3 mbcache jbd virtio_balloon xfs exportfs dm_mod virtio_blk ata_generic virtio_net floppy ata_piix libata virtio_pci virtio_ring virtio [last unloaded: scsi_wait_scan] [ 452.064012] CPU 1 [ 452.080015] BUG: soft lockup - CPU#2 stuck for 23s! [accel-pppd:6643] [ 452.080015] CPU 2 [ 452.080015] [ 452.080015] Pid: 6643, comm: accel-pppd Not tainted 3.2.46.mini #1 Bochs Bochs [ 452.080015] RIP: 0010:[<ffffffff81059f6c>] [<ffffffff81059f6c>] do_raw_spin_lock+0x17/0x1f [ 452.080015] RSP: 0018:ffff88007125fc18 EFLAGS: 00000293 [ 452.080015] RAX: 000000000000aba9 RBX: ffffffff811d0703 RCX: 0000000000000000 [ 452.080015] RDX: 00000000000000ab RSI: ffff8800711f6896 RDI: ffff8800745c8110 [ 452.080015] RBP: ffff88007125fc18 R08: 0000000000000020 R09: 0000000000000000 [ 452.080015] R10: 0000000000000000 R11: 0000000000000280 R12: 0000000000000286 [ 452.080015] R13: 0000000000000020 R14: 0000000000000240 R15: 0000000000000000 [ 452.080015] FS: 00007fdc0cc24700(0000) GS:ffff8800b6f00000(0000) knlGS:0000000000000000 [ 452.080015] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 452.080015] CR2: 00007fdb054899b8 CR3: 0000000074404000 CR4: 00000000000006a0 [ 452.080015] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 452.080015] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 452.080015] Process accel-pppd (pid: 6643, threadinfo ffff88007125e000, task ffff8800b27e6dd0) [ 452.080015] Stack: [ 452.080015] ffff88007125fc28 ffffffff81256559 ffff88007125fc98 ffffffffa01b2bd1 [ 452.080015] ffff88007125fc58 000000000000000c 00000000029490d0 0000009c71dbe25e [ 452.080015] 000000000000005c 000000080000000e 0000000000000000 ffff880071170600 [ 452.080015] Call Trace: [ 452.080015] [<ffffffff81256559>] _raw_spin_lock+0xe/0x10 [ 452.080015] [<ffffffffa01b2bd1>] l2tp_xmit_skb+0x189/0x4ac [l2tp_core] [ 452.080015] [<ffffffffa01c2d36>] pppol2tp_sendmsg+0x15e/0x19c [l2tp_ppp] [ 452.080015] [<ffffffff811c7872>] __sock_sendmsg_nosec+0x22/0x24 [ 452.080015] [<ffffffff811c83bd>] sock_sendmsg+0xa1/0xb6 [ 452.080015] [<ffffffff81254e88>] ? __schedule+0x5c1/0x616 [ 452.080015] [<ffffffff8103c7c6>] ? __dequeue_signal+0xb7/0x10c [ 452.080015] [<ffffffff810bbd21>] ? fget_light+0x75/0x89 [ 452.080015] [<ffffffff811c8444>] ? sockfd_lookup_light+0x20/0x56 [ 452.080015] [<ffffffff811c9b34>] sys_sendto+0x10c/0x13b [ 452.080015] [<ffffffff8125cac2>] system_call_fastpath+0x16/0x1b [ 452.080015] Code: 81 48 89 e5 72 0c 31 c0 48 81 ff 45 66 25 81 0f 92 c0 5d c3 55 b8 00 01 00 00 48 89 e5 f0 66 0f c1 07 0f b6 d4 38 d0 74 06 f3 90 <8a> 07 eb f6 5d c3 90 90 55 48 89 e5 9c 58 0f 1f 44 00 00 5d c3 [ 452.080015] Call Trace: [ 452.080015] [<ffffffff81256559>] _raw_spin_lock+0xe/0x10 [ 452.080015] [<ffffffffa01b2bd1>] l2tp_xmit_skb+0x189/0x4ac [l2tp_core] [ 452.080015] [<ffffffffa01c2d36>] pppol2tp_sendmsg+0x15e/0x19c [l2tp_ppp] [ 452.080015] [<ffffffff811c7872>] __sock_sendmsg_nosec+0x22/0x24 [ 452.080015] [<ffffffff811c83bd>] sock_sendmsg+0xa1/0xb6 [ 452.080015] [<ffffffff81254e88>] ? __schedule+0x5c1/0x616 [ 452.080015] [<ffffffff8103c7c6>] ? __dequeue_signal+0xb7/0x10c [ 452.080015] [<ffffffff810bbd21>] ? fget_light+0x75/0x89 [ 452.080015] [<ffffffff811c8444>] ? sockfd_lookup_light+0x20/0x56 [ 452.080015] [<ffffffff811c9b34>] sys_sendto+0x10c/0x13b [ 452.080015] [<ffffffff8125cac2>] system_call_fastpath+0x16/0x1b [ 452.064012] [ 452.064012] Pid: 6662, comm: accel-pppd Not tainted 3.2.46.mini #1 Bochs Bochs [ 452.064012] RIP: 0010:[<ffffffff81059f6e>] [<ffffffff81059f6e>] do_raw_spin_lock+0x19/0x1f [ 452.064012] RSP: 0018:ffff8800b6e83ba0 EFLAGS: 00000297 [ 452.064012] RAX: 000000000000aaa9 RBX: ffff8800b6e83b40 RCX: 0000000000000002 [ 452.064012] RDX: 00000000000000aa RSI: 000000000000000a RDI: ffff8800745c8110 [ 452.064012] RBP: ffff8800b6e83ba0 R08: 000000000000c802 R09: 000000000000001c [ 452.064012] R10: ffff880071096c4e R11: 0000000000000006 R12: ffff8800b6e83b18 [ 452.064012] R13: ffffffff8125d51e R14: ffff8800b6e83ba0 R15: ffff880072a589c0 [ 452.064012] FS: 00007fdc0b81e700(0000) GS:ffff8800b6e80000(0000) knlGS:0000000000000000 [ 452.064012] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 452.064012] CR2: 0000000000625208 CR3: 0000000074404000 CR4: 00000000000006a0 [ 452.064012] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 452.064012] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 452.064012] Process accel-pppd (pid: 6662, threadinfo ffff88007129a000, task ffff8800744f7410) [ 452.064012] Stack: [ 452.064012] ffff8800b6e83bb0 ffffffff81256559 ffff8800b6e83bc0 ffffffff8121c64a [ 452.064012] ffff8800b6e83bf0 ffffffff8121ec7a ffff880072a589c0 ffff880071096c62 [ 452.064012] 0000000000000011 ffffffff81430024 ffff8800b6e83c80 ffffffff8121f276 [ 452.064012] Call Trace: [ 452.064012] <IRQ> [ 452.064012] [<ffffffff81256559>] _raw_spin_lock+0xe/0x10 [ 452.064012] [<ffffffff8121c64a>] spin_lock+0x9/0xb [ 452.064012] [<ffffffff8121ec7a>] udp_queue_rcv_skb+0x186/0x269 [ 452.064012] [<ffffffff8121f276>] __udp4_lib_rcv+0x297/0x4ae [ 452.064012] [<ffffffff8121c178>] ? raw_rcv+0xe9/0xf0 [ 452.064012] [<ffffffff8121f4a7>] udp_rcv+0x1a/0x1c [ 452.064012] [<ffffffff811fe385>] ip_local_deliver_finish+0x12b/0x1a5 [ 452.064012] [<ffffffff811fe54e>] ip_local_deliver+0x53/0x84 [ 452.064012] [<ffffffff811fe1d0>] ip_rcv_finish+0x2bc/0x2f3 [ 452.064012] [<ffffffff811fe78f>] ip_rcv+0x210/0x269 [ 452.064012] [<ffffffff8101911e>] ? kvm_clock_get_cycles+0x9/0xb [ 452.064012] [<ffffffff811d88cd>] __netif_receive_skb+0x3a5/0x3f7 [ 452.064012] [<ffffffff811d8eba>] netif_receive_skb+0x57/0x5e [ 452.064012] [<ffffffff811cf30f>] ? __netdev_alloc_skb+0x1f/0x3b [ 452.064012] [<ffffffffa0049126>] virtnet_poll+0x4ba/0x5a4 [virtio_net] [ 452.064012] [<ffffffff811d9417>] net_rx_action+0x73/0x184 [ 452.064012] [<ffffffffa01b2cc2>] ? l2tp_xmit_skb+0x27a/0x4ac [l2tp_core] [ 452.064012] [<ffffffff810343b9>] __do_softirq+0xc3/0x1a8 [ 452.064012] [<ffffffff81013b56>] ? ack_APIC_irq+0x10/0x12 [ 452.064012] [<ffffffff81256559>] ? _raw_spin_lock+0xe/0x10 [ 452.064012] [<ffffffff8125e0ac>] call_softirq+0x1c/0x26 [ 452.064012] [<ffffffff81003587>] do_softirq+0x45/0x82 [ 452.064012] [<ffffffff81034667>] irq_exit+0x42/0x9c [ 452.064012] [<ffffffff8125e146>] do_IRQ+0x8e/0xa5 [ 452.064012] [<ffffffff8125676e>] common_interrupt+0x6e/0x6e [ 452.064012] <EOI> [ 452.064012] [<ffffffff810b82a1>] ? kfree+0x8a/0xa3 [ 452.064012] [<ffffffffa01b2cc2>] ? l2tp_xmit_skb+0x27a/0x4ac [l2tp_core] [ 452.064012] [<ffffffffa01b2c25>] ? l2tp_xmit_skb+0x1dd/0x4ac [l2tp_core] [ 452.064012] [<ffffffffa01c2d36>] pppol2tp_sendmsg+0x15e/0x19c [l2tp_ppp] [ 452.064012] [<ffffffff811c7872>] __sock_sendmsg_nosec+0x22/0x24 [ 452.064012] [<ffffffff811c83bd>] sock_sendmsg+0xa1/0xb6 [ 452.064012] [<ffffffff81254e88>] ? __schedule+0x5c1/0x616 [ 452.064012] [<ffffffff8103c7c6>] ? __dequeue_signal+0xb7/0x10c [ 452.064012] [<ffffffff810bbd21>] ? fget_light+0x75/0x89 [ 452.064012] [<ffffffff811c8444>] ? sockfd_lookup_light+0x20/0x56 [ 452.064012] [<ffffffff811c9b34>] sys_sendto+0x10c/0x13b [ 452.064012] [<ffffffff8125cac2>] system_call_fastpath+0x16/0x1b [ 452.064012] Code: 89 e5 72 0c 31 c0 48 81 ff 45 66 25 81 0f 92 c0 5d c3 55 b8 00 01 00 00 48 89 e5 f0 66 0f c1 07 0f b6 d4 38 d0 74 06 f3 90 8a 07 <eb> f6 5d c3 90 90 55 48 89 e5 9c 58 0f 1f 44 00 00 5d c3 55 48 [ 452.064012] Call Trace: [ 452.064012] <IRQ> [<ffffffff81256559>] _raw_spin_lock+0xe/0x10 [ 452.064012] [<ffffffff8121c64a>] spin_lock+0x9/0xb [ 452.064012] [<ffffffff8121ec7a>] udp_queue_rcv_skb+0x186/0x269 [ 452.064012] [<ffffffff8121f276>] __udp4_lib_rcv+0x297/0x4ae [ 452.064012] [<ffffffff8121c178>] ? raw_rcv+0xe9/0xf0 [ 452.064012] [<ffffffff8121f4a7>] udp_rcv+0x1a/0x1c [ 452.064012] [<ffffffff811fe385>] ip_local_deliver_finish+0x12b/0x1a5 [ 452.064012] [<ffffffff811fe54e>] ip_local_deliver+0x53/0x84 [ 452.064012] [<ffffffff811fe1d0>] ip_rcv_finish+0x2bc/0x2f3 [ 452.064012] [<ffffffff811fe78f>] ip_rcv+0x210/0x269 [ 452.064012] [<ffffffff8101911e>] ? kvm_clock_get_cycles+0x9/0xb [ 452.064012] [<ffffffff811d88cd>] __netif_receive_skb+0x3a5/0x3f7 [ 452.064012] [<ffffffff811d8eba>] netif_receive_skb+0x57/0x5e [ 452.064012] [<ffffffff811cf30f>] ? __netdev_alloc_skb+0x1f/0x3b [ 452.064012] [<ffffffffa0049126>] virtnet_poll+0x4ba/0x5a4 [virtio_net] [ 452.064012] [<ffffffff811d9417>] net_rx_action+0x73/0x184 [ 452.064012] [<ffffffffa01b2cc2>] ? l2tp_xmit_skb+0x27a/0x4ac [l2tp_core] [ 452.064012] [<ffffffff810343b9>] __do_softirq+0xc3/0x1a8 [ 452.064012] [<ffffffff81013b56>] ? ack_APIC_irq+0x10/0x12 [ 452.064012] [<ffffffff81256559>] ? _raw_spin_lock+0xe/0x10 [ 452.064012] [<ffffffff8125e0ac>] call_softirq+0x1c/0x26 [ 452.064012] [<ffffffff81003587>] do_softirq+0x45/0x82 [ 452.064012] [<ffffffff81034667>] irq_exit+0x42/0x9c [ 452.064012] [<ffffffff8125e146>] do_IRQ+0x8e/0xa5 [ 452.064012] [<ffffffff8125676e>] common_interrupt+0x6e/0x6e [ 452.064012] <EOI> [<ffffffff810b82a1>] ? kfree+0x8a/0xa3 [ 452.064012] [<ffffffffa01b2cc2>] ? l2tp_xmit_skb+0x27a/0x4ac [l2tp_core] [ 452.064012] [<ffffffffa01b2c25>] ? l2tp_xmit_skb+0x1dd/0x4ac [l2tp_core] [ 452.064012] [<ffffffffa01c2d36>] pppol2tp_sendmsg+0x15e/0x19c [l2tp_ppp] [ 452.064012] [<ffffffff811c7872>] __sock_sendmsg_nosec+0x22/0x24 [ 452.064012] [<ffffffff811c83bd>] sock_sendmsg+0xa1/0xb6 [ 452.064012] [<ffffffff81254e88>] ? __schedule+0x5c1/0x616 [ 452.064012] [<ffffffff8103c7c6>] ? __dequeue_signal+0xb7/0x10c [ 452.064012] [<ffffffff810bbd21>] ? fget_light+0x75/0x89 [ 452.064012] [<ffffffff811c8444>] ? sockfd_lookup_light+0x20/0x56 [ 452.064012] [<ffffffff811c9b34>] sys_sendto+0x10c/0x13b [ 452.064012] [<ffffffff8125cac2>] system_call_fastpath+0x16/0x1b Reported-by: François Cachereul <[email protected]> Tested-by: François Cachereul <[email protected]> Signed-off-by: Eric Dumazet <[email protected]> Cc: James Chapman <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2013-10-11vti: get rid of nf mark rule in preroutingChristophe Gouault1-3/+11
This patch fixes and improves the use of vti interfaces (while lightly changing the way of configuring them). Currently: - it is necessary to identify and mark inbound IPsec packets destined to each vti interface, via netfilter rules in the mangle table at prerouting hook. - the vti module cannot retrieve the right tunnel in input since commit b9959fd3: vti tunnels all have an i_key, but the tunnel lookup is done with flag TUNNEL_NO_KEY, so there no chance to retrieve them. - the i_key is used by the outbound processing as a mark to lookup for the right SP and SA bundle. This patch uses the o_key to store the vti mark (instead of i_key) and enables: - to avoid the need for previously marking the inbound skbuffs via a netfilter rule. - to properly retrieve the right tunnel in input, only based on the IPsec packet outer addresses. - to properly perform an inbound policy check (using the tunnel o_key as a mark). - to properly perform an outbound SPD and SAD lookup (using the tunnel o_key as a mark). - to keep the current mark of the skbuff. The skbuff mark is neither used nor changed by the vti interface. Only the vti interface o_key is used. SAs have a wildcard mark. SPs have a mark equal to the vti interface o_key. The vti interface must be created as follows (i_key = 0, o_key = mark): ip link add vti1 mode vti local 1.1.1.1 remote 2.2.2.2 okey 1 The SPs attached to vti1 must be created as follows (mark = vti1 o_key): ip xfrm policy add dir out mark 1 tmpl src 1.1.1.1 dst 2.2.2.2 \ proto esp mode tunnel ip xfrm policy add dir in mark 1 tmpl src 2.2.2.2 dst 1.1.1.1 \ proto esp mode tunnel The SAs are created with the default wildcard mark. There is no distinction between global vs. vti SAs. Just their addresses will possibly link them to a vti interface: ip xfrm state add src 1.1.1.1 dst 2.2.2.2 proto esp spi 1000 mode tunnel \ enc "cbc(aes)" "azertyuiopqsdfgh" ip xfrm state add src 2.2.2.2 dst 1.1.1.1 proto esp spi 2000 mode tunnel \ enc "cbc(aes)" "sqbdhgqsdjqjsdfh" To avoid matching "global" (not vti) SPs in vti interfaces, global SPs should no use the default wildcard mark, but explicitly match mark 0. To avoid a double SPD lookup in input and output (in global and vti SPDs), the NOPOLICY and NOXFRM options should be set on the vti interfaces: echo 1 > /proc/sys/net/ipv4/conf/vti1/disable_policy echo 1 > /proc/sys/net/ipv4/conf/vti1/disable_xfrm The outgoing traffic is steered to vti1 by a route via the vti interface: ip route add 192.168.0.0/16 dev vti1 The incoming IPsec traffic is steered to vti1 because its outer addresses match the vti1 tunnel configuration. Signed-off-by: Christophe Gouault <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2013-10-11bridge: update mdb expiration timer upon reports.Vlad Yasevich1-1/+8
commit 9f00b2e7cf241fa389733d41b615efdaa2cb0f5b bridge: only expire the mdb entry when query is received changed the mdb expiration timer to be armed only when QUERY is received. Howerver, this causes issues in an environment where the multicast server socket comes and goes very fast while a client is trying to send traffic to it. The root cause is a race where a sequence of LEAVE followed by REPORT messages can race against QUERY messages generated in response to LEAVE. The QUERY ends up starting the expiration timer, and that timer can potentially expire after the new REPORT message has been received signaling the new join operation. This leads to a significant drop in multicast traffic and possible complete stall. The solution is to have REPORT messages update the expiration timer on entries that already exist. CC: Cong Wang <[email protected]> CC: Herbert Xu <[email protected]> CC: Stephen Hemminger <[email protected]> Signed-off-by: Vlad Yasevich <[email protected]> Acked-by: Herbert Xu <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2013-10-10Merge branch 'for-john' of ↵John W. Linville4-2/+8
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211
2013-10-09Merge branch 'master' of ↵David S. Miller9-42/+59
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec Steffen Klassert says: ==================== 1) We used the wrong netlink attribute to verify the lenght of the replay window on async events. Fix this by using the right netlink attribute. 2) Policy lookups can not match the output interface on forwarding. Add the needed informations to the flow informations. 3) We update the pmtu when we receive a ICMPV6_DEST_UNREACH message on IPsec with ipv6. This is wrong and leads to strange fragmented packets, only ICMPV6_PKT_TOOBIG messages should update the pmtu. Fix this by removing the ICMPV6_DEST_UNREACH check from the IPsec protocol error handlers. 4) The legacy IPsec anti replay mechanism supports anti replay windows up to 32 packets. If a user requests for a bigger anti replay window, we use 32 packets but pretend that we use the requested window size. Fix from Fan Du. 5) If asynchronous events are enabled and replay_maxdiff is set to zero, we generate an async event for every received packet instead of checking whether a timeout occurred. Fix from Thomas Egerer. 6) Policies need a refcount when the state resolution timer is armed. Otherwise the timer can fire after the policy is deleted. 7) We might dreference a NULL pointer if the hold_queue is empty, add a check to avoid this. ==================== Signed-off-by: David S. Miller <[email protected]>
2013-10-09net: secure_seq: Fix warning when CONFIG_IPV6 and CONFIG_INET are not selectedFabio Estevam1-0/+2
net_secret() is only used when CONFIG_IPV6 or CONFIG_INET are selected. Building a defconfig with both of these symbols unselected (Using the ARM at91sam9rl_defconfig, for example) leads to the following build warning: $ make at91sam9rl_defconfig # # configuration written to .config # $ make net/core/secure_seq.o scripts/kconfig/conf --silentoldconfig Kconfig CHK include/config/kernel.release CHK include/generated/uapi/linux/version.h CHK include/generated/utsrelease.h make[1]: `include/generated/mach-types.h' is up to date. CALL scripts/checksyscalls.sh CC net/core/secure_seq.o net/core/secure_seq.c:17:13: warning: 'net_secret_init' defined but not used [-Wunused-function] Fix this warning by protecting the definition of net_secret() with these symbols. Reported-by: Olof Johansson <[email protected]> Signed-off-by: Fabio Estevam <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2013-10-09cfg80211: don't add p2p device while in RFKILLEmmanuel Grumbach2-2/+3
Since P2P device doesn't have a netdev associated to it, we cannot prevent the user to start it when in RFKILL. So refuse to even add it when in RFKILL. Signed-off-by: Emmanuel Grumbach <[email protected]> Signed-off-by: Johannes Berg <[email protected]>
2013-10-09mac80211: correctly close cancelled scansEmmanuel Grumbach2-0/+22
__ieee80211_scan_completed is called from a worker. This means that the following flow is possible. * driver calls ieee80211_scan_completed * mac80211 cancels the scan (that is already complete) * __ieee80211_scan_completed runs When scan_work will finally run, it will see that the scan hasn't been aborted and might even trigger another scan on another band. This leads to a situation where cfg80211's scan is not done and no further scan can be issued. Fix this by setting a new flag when a HW scan is being cancelled so that no other scan will be triggered. Cc: [email protected] Signed-off-by: Emmanuel Grumbach <[email protected]> Signed-off-by: Johannes Berg <[email protected]>
2013-10-09Merge tag 'v3.12-rc4' into sched/coreIngo Molnar63-453/+640
Merge Linux v3.12-rc4 to fix a conflict and also to refresh the tree before applying more scheduler patches. Conflicts: arch/avr32/include/asm/Kbuild Signed-off-by: Ingo Molnar <[email protected]>
2013-10-08pkt_sched: fq: fix non TCP flows pacingEric Dumazet2-11/+10
Steinar reported FQ pacing was not working for UDP flows. It looks like the initial sk->sk_pacing_rate value of 0 was a wrong choice. We should init it to ~0U (unlimited) Then, TCA_FQ_FLOW_DEFAULT_RATE should be removed because it makes no real sense. The default rate is really unlimited, and we need to avoid a zero divide. Reported-by: Steinar H. Gunderson <[email protected]> Signed-off-by: Eric Dumazet <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2013-10-08net: vlan: fix nlmsg size calculation in vlan_get_size()Marc Kleine-Budde1-1/+1
This patch fixes the calculation of the nlmsg size, by adding the missing nla_total_size(). Cc: Patrick McHardy <[email protected]> Signed-off-by: Marc Kleine-Budde <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2013-10-08pkt_sched: fq: fix typo for initial_quantumEric Dumazet1-1/+1
TCA_FQ_INITIAL_QUANTUM should set q->initial_quantum Signed-off-by: Eric Dumazet <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2013-10-08ipv6: Fix the upper MTU limit in GRE tunnelOussama Ghorbel1-2/+1
Unlike ipv4, the struct member hlen holds the length of the GRE and ipv6 headers. This length is also counted in dev->hard_header_len. Perhaps, it's more clean to modify the hlen to count only the GRE header without ipv6 header as the variable name suggest, but the simple way to fix this without regression risk is simply modify the calculation of the limit in ip6gre_tunnel_change_mtu function. Verified in kernel version v3.11. Signed-off-by: Oussama Ghorbel <[email protected]> Acked-by: Hannes Frederic Sowa <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2013-10-08l2tp: Fix build warning with ipv6 disabled.David S. Miller1-5/+8
net/l2tp/l2tp_core.c: In function ‘l2tp_verify_udp_checksum’: net/l2tp/l2tp_core.c:499:22: warning: unused variable ‘tunnel’ [-Wunused-variable] Create a helper "l2tp_tunnel()" to facilitate this, and as a side effect get rid of a bunch of unnecessary void pointer casts. Signed-off-by: David S. Miller <[email protected]>
2013-10-086lowpan: Sync default hardware address of lowpan links to their wpanAlan Ott1-0/+3
When a lowpan link to a wpan device is created, set the hardware address of the lowpan link to that of the wpan device. Signed-off-by: Alan Ott <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2013-10-086lowpan: Only make 6lowpan links to IEEE802154 devicesAlan Ott1-0/+2
Refuse to create 6lowpan links if the actual hardware interface is of any type other than ARPHRD_IEEE802154. Signed-off-by: Alan Ott <[email protected]> Suggested-by: Alexander Aring <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2013-10-08xfrm: check for a vaild skb in xfrm_policy_queue_processSteffen Klassert1-0/+4
We might dreference a NULL pointer if the hold_queue is empty, so add a check to avoid this. Bug was introduced with git commit a0073fe18 ("xfrm: Add a state resolution packet queue") Signed-off-by: Steffen Klassert <[email protected]>
2013-10-08xfrm: Add refcount handling to queued policiesSteffen Klassert1-7/+17
We need to ensure that policies can't go away as long as the hold timer is armed, so take a refcont when we arm the timer and drop one if we delete it. Bug was introduced with git commit a0073fe18 ("xfrm: Add a state resolution packet queue") Signed-off-by: Steffen Klassert <[email protected]>
2013-10-07net: Update the sysctl permissions handler to test effective uid/gidEric W. Biederman1-2/+2
On Tue, 20 Aug 2013 11:40:04 -0500 Eric Sandeen <[email protected]> wrote: > This was brought up in a Red Hat bug (which may be marked private, I'm sorry): > > Bug 987055 - open O_WRONLY succeeds on some root owned files in /proc for process running with unprivileged EUID > > "On RHEL7 some of the files in /proc can be opened for writing by an unprivileged EUID." > > The flaw existed upstream as well last I checked. > > This commit in kernel v3.8 caused the regression: > > commit cff109768b2d9c03095848f4cd4b0754117262aa > Author: Eric W. Biederman <[email protected]> > Date: Fri Nov 16 03:03:01 2012 +0000 > > net: Update the per network namespace sysctls to be available to the network namespace owner > > - Allow anyone with CAP_NET_ADMIN rights in the user namespace of the > the netowrk namespace to change sysctls. > - Allow anyone the uid of the user namespace root the same > permissions over the network namespace sysctls as the global root. > - Allow anyone with gid of the user namespace root group the same > permissions over the network namespace sysctl as the global root group. > > Signed-off-by: "Eric W. Biederman" <[email protected]> > Signed-off-by: David S. Miller <[email protected]> > > because it changed /sys/net's special permission handler to test current_uid, not > current_euid; same for current_gid/current_egid. > > So in this case, root cannot drop privs via set[ug]id, and retains all privs > in this codepath. Modify the code to use current_euid(), and in_egroup_p, as in done in fs/proc/proc_sysctl.c:test_perm() Cc: [email protected] Reviewed-by: Eric Sandeen <[email protected]> Reported-by: Eric Sandeen <[email protected]> Signed-off-by: "Eric W. Biederman" <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2013-10-07ipv4: fix ineffective source address selectionJiri Benc1-1/+1
When sending out multicast messages, the source address in inet->mc_addr is ignored and rewritten by an autoselected one. This is caused by a typo in commit 813b3b5db831 ("ipv4: Use caller's on-stack flowi as-is in output route lookups"). Signed-off-by: Jiri Benc <[email protected]> Acked-by: Eric Dumazet <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2013-10-07net: fix unsafe set_memory_rw from softirqAlexei Starovoitov1-4/+4
on x86 system with net.core.bpf_jit_enable = 1 sudo tcpdump -i eth1 'tcp port 22' causes the warning: [ 56.766097] Possible unsafe locking scenario: [ 56.766097] [ 56.780146] CPU0 [ 56.786807] ---- [ 56.793188] lock(&(&vb->lock)->rlock); [ 56.799593] <Interrupt> [ 56.805889] lock(&(&vb->lock)->rlock); [ 56.812266] [ 56.812266] *** DEADLOCK *** [ 56.812266] [ 56.830670] 1 lock held by ksoftirqd/1/13: [ 56.836838] #0: (rcu_read_lock){.+.+..}, at: [<ffffffff8118f44c>] vm_unmap_aliases+0x8c/0x380 [ 56.849757] [ 56.849757] stack backtrace: [ 56.862194] CPU: 1 PID: 13 Comm: ksoftirqd/1 Not tainted 3.12.0-rc3+ #45 [ 56.868721] Hardware name: System manufacturer System Product Name/P8Z77 WS, BIOS 3007 07/26/2012 [ 56.882004] ffffffff821944c0 ffff88080bbdb8c8 ffffffff8175a145 0000000000000007 [ 56.895630] ffff88080bbd5f40 ffff88080bbdb928 ffffffff81755b14 0000000000000001 [ 56.909313] ffff880800000001 ffff880800000000 ffffffff8101178f 0000000000000001 [ 56.923006] Call Trace: [ 56.929532] [<ffffffff8175a145>] dump_stack+0x55/0x76 [ 56.936067] [<ffffffff81755b14>] print_usage_bug+0x1f7/0x208 [ 56.942445] [<ffffffff8101178f>] ? save_stack_trace+0x2f/0x50 [ 56.948932] [<ffffffff810cc0a0>] ? check_usage_backwards+0x150/0x150 [ 56.955470] [<ffffffff810ccb52>] mark_lock+0x282/0x2c0 [ 56.961945] [<ffffffff810ccfed>] __lock_acquire+0x45d/0x1d50 [ 56.968474] [<ffffffff810cce6e>] ? __lock_acquire+0x2de/0x1d50 [ 56.975140] [<ffffffff81393bf5>] ? cpumask_next_and+0x55/0x90 [ 56.981942] [<ffffffff810cef72>] lock_acquire+0x92/0x1d0 [ 56.988745] [<ffffffff8118f52a>] ? vm_unmap_aliases+0x16a/0x380 [ 56.995619] [<ffffffff817628f1>] _raw_spin_lock+0x41/0x50 [ 57.002493] [<ffffffff8118f52a>] ? vm_unmap_aliases+0x16a/0x380 [ 57.009447] [<ffffffff8118f52a>] vm_unmap_aliases+0x16a/0x380 [ 57.016477] [<ffffffff8118f44c>] ? vm_unmap_aliases+0x8c/0x380 [ 57.023607] [<ffffffff810436b0>] change_page_attr_set_clr+0xc0/0x460 [ 57.030818] [<ffffffff810cfb8d>] ? trace_hardirqs_on+0xd/0x10 [ 57.037896] [<ffffffff811a8330>] ? kmem_cache_free+0xb0/0x2b0 [ 57.044789] [<ffffffff811b59c3>] ? free_object_rcu+0x93/0xa0 [ 57.051720] [<ffffffff81043d9f>] set_memory_rw+0x2f/0x40 [ 57.058727] [<ffffffff8104e17c>] bpf_jit_free+0x2c/0x40 [ 57.065577] [<ffffffff81642cba>] sk_filter_release_rcu+0x1a/0x30 [ 57.072338] [<ffffffff811108e2>] rcu_process_callbacks+0x202/0x7c0 [ 57.078962] [<ffffffff81057f17>] __do_softirq+0xf7/0x3f0 [ 57.085373] [<ffffffff81058245>] run_ksoftirqd+0x35/0x70 cannot reuse jited filter memory, since it's readonly, so use original bpf insns memory to hold work_struct defer kfree of sk_filter until jit completed freeing tested on x86_64 and i386 Signed-off-by: Alexei Starovoitov <[email protected]> Acked-by: Eric Dumazet <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2013-10-07ipv6: Allow the MTU of ipip6 tunnel to be set below 1280Oussama Ghorbel1-2/+10
The (inner) MTU of a ipip6 (IPv4-in-IPv6) tunnel cannot be set below 1280, which is the minimum MTU in IPv6. However, there should be no IPv6 on the tunnel interface at all, so the IPv6 rules should not apply. More info at https://bugzilla.kernel.org/show_bug.cgi?id=15530 This patch allows to check the minimum MTU for ipv6 tunnel according to these rules: -In case the tunnel is configured with ipip6 mode the minimum MTU is 68. -In case the tunnel is configured with ip6ip6 or any mode the minimum MTU is 1280. Signed-off-by: Oussama Ghorbel <[email protected]> Acked-by: Hannes Frederic Sowa <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2013-10-07netif_set_xps_queue: make cpu mask constMichael S. Tsirkin1-1/+2
virtio wants to pass in cpumask_of(cpu), make parameter const to avoid build warnings. Signed-off-by: Michael S. Tsirkin <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2013-10-06net: Update the sysctl permissions handler to test effective uid/gidEric W. Biederman1-2/+2
Modify the code to use current_euid(), and in_egroup_p, as in done in fs/proc/proc_sysctl.c:test_perm() Cc: [email protected] Reviewed-by: Eric Sandeen <[email protected]> Reported-by: Eric Sandeen <[email protected]> Signed-off-by: "Eric W. Biederman" <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2013-10-04tcp: do not forget FIN in tcp_shifted_skb()Eric Dumazet1-1/+4
Yuchung found following problem : There are bugs in the SACK processing code, merging part in tcp_shift_skb_data(), that incorrectly resets or ignores the sacked skbs FIN flag. When a receiver first SACK the FIN sequence, and later throw away ofo queue (e.g., sack-reneging), the sender will stop retransmitting the FIN flag, and hangs forever. Following packetdrill test can be used to reproduce the bug. $ cat sack-merge-bug.pkt `sysctl -q net.ipv4.tcp_fack=0` // Establish a connection and send 10 MSS. 0.000 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3 +.000 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0 +.000 bind(3, ..., ...) = 0 +.000 listen(3, 1) = 0 +.050 < S 0:0(0) win 32792 <mss 1000,sackOK,nop,nop,nop,wscale 7> +.000 > S. 0:0(0) ack 1 <mss 1460,nop,nop,sackOK,nop,wscale 6> +.001 < . 1:1(0) ack 1 win 1024 +.000 accept(3, ..., ...) = 4 +.100 write(4, ..., 12000) = 12000 +.000 shutdown(4, SHUT_WR) = 0 +.000 > . 1:10001(10000) ack 1 +.050 < . 1:1(0) ack 2001 win 257 +.000 > FP. 10001:12001(2000) ack 1 +.050 < . 1:1(0) ack 2001 win 257 <sack 10001:11001,nop,nop> +.050 < . 1:1(0) ack 2001 win 257 <sack 10001:12002,nop,nop> // SACK reneg +.050 < . 1:1(0) ack 12001 win 257 +0 %{ print "unacked: ",tcpi_unacked }% +5 %{ print "" }% First, a typo inverted left/right of one OR operation, then code forgot to advance end_seq if the merged skb carried FIN. Bug was added in 2.6.29 by commit 832d11c5cd076ab ("tcp: Try to restore large SKBs while SACK processing") Signed-off-by: Eric Dumazet <[email protected]> Signed-off-by: Yuchung Cheng <[email protected]> Acked-by: Neal Cardwell <[email protected]> Cc: Ilpo Järvinen <[email protected]> Acked-by: Ilpo Järvinen <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2013-10-04sched/wait: Make the __wait_event*() interface more friendlyPeter Zijlstra2-8/+4
Change all __wait_event*() implementations to match the corresponding wait_event*() signature for convenience. In particular this does away with the weird 'ret' logic. Since there are __wait_event*() users this requires we update them too. Reviewed-by: Oleg Nesterov <[email protected]> Signed-off-by: Peter Zijlstra <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Ingo Molnar <[email protected]>
2013-10-03Merge branch 'for-davem' of ↵David S. Miller5-14/+22
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless John W. Linville says: ==================== Here is another batch of fixes intended for the 3.12 stream... For the mac80211 bits, Johannes says: "This time I have two fixes for IBSS (including one for wext, hah), a fix for extended rates IEs, an active monitor checking fix and a sysfs registration race fix." On top of those... Amitkumar Karwar brings an mwifiex fix for an interrupt loss issue w/ SDIO devices. The problem was due to a command timeout issue introduced by an earlier patch. Felix Fietkau a stall in the ath9k driver. This patch fixes the regression introduced in the commit "ath9k: use software queues for un-aggregated data packets". Stanislaw Gruszka reverts an rt2x00 patch that was found to cause connection problems with some devices. ==================== Signed-off-by: David S. Miller <[email protected]>
2013-10-03net: heap overflow in __audit_sockaddr()Dan Carpenter2-4/+22
We need to cap ->msg_namelen or it leads to a buffer overflow when we to the memcpy() in __audit_sockaddr(). It requires CAP_AUDIT_CONTROL to exploit this bug. The call tree is: ___sys_recvmsg() move_addr_to_user() audit_sockaddr() __audit_sockaddr() Reported-by: Jüri Aedla <[email protected]> Signed-off-by: Dan Carpenter <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2013-10-03Merge branch 'master' of ↵John W. Linville5-14/+22
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
2013-10-03Merge tag 'batman-adv-fix-for-davem' of git://git.open-mesh.org/linux-mergeDavid S. Miller3-16/+31
Included change: - fix multi soft-interfaces setups with Network Coding enabled by registering the CODED packet type once only (instead of once per soft-if) Signed-off-by: David S. Miller <[email protected]>
2013-10-02l2tp: fix kernel panic when using IPv4-mapped IPv6 addressesFrançois Cachereul2-4/+26
IPv4 mapped addresses cause kernel panic. The patch juste check whether the IPv6 address is an IPv4 mapped address. If so, use IPv4 API instead of IPv6. [ 940.026915] general protection fault: 0000 [#1] [ 940.026915] Modules linked in: l2tp_ppp l2tp_netlink l2tp_core pppox ppp_generic slhc loop psmouse [ 940.026915] CPU: 0 PID: 3184 Comm: memcheck-amd64- Not tainted 3.11.0+ #1 [ 940.026915] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2007 [ 940.026915] task: ffff880007130e20 ti: ffff88000737e000 task.ti: ffff88000737e000 [ 940.026915] RIP: 0010:[<ffffffff81333780>] [<ffffffff81333780>] ip6_xmit+0x276/0x326 [ 940.026915] RSP: 0018:ffff88000737fd28 EFLAGS: 00010286 [ 940.026915] RAX: c748521a75ceff48 RBX: ffff880000c30800 RCX: 0000000000000000 [ 940.026915] RDX: ffff88000075cc4e RSI: 0000000000000028 RDI: ffff8800060e5a40 [ 940.026915] RBP: ffff8800060e5a40 R08: 0000000000000000 R09: ffff88000075cc90 [ 940.026915] R10: 0000000000000000 R11: 0000000000000000 R12: ffff88000737fda0 [ 940.026915] R13: 0000000000000000 R14: 0000000000002000 R15: ffff880005d3b580 [ 940.026915] FS: 00007f163dc5e800(0000) GS:ffffffff81623000(0000) knlGS:0000000000000000 [ 940.026915] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 940.026915] CR2: 00000004032dc940 CR3: 0000000005c25000 CR4: 00000000000006f0 [ 940.026915] Stack: [ 940.026915] ffff88000075cc4e ffffffff81694e90 ffff880000c30b38 0000000000000020 [ 940.026915] 11000000523c4bac ffff88000737fdb4 0000000000000000 ffff880000c30800 [ 940.026915] ffff880005d3b580 ffff880000c30b38 ffff8800060e5a40 0000000000000020 [ 940.026915] Call Trace: [ 940.026915] [<ffffffff81356cc3>] ? inet6_csk_xmit+0xa4/0xc4 [ 940.026915] [<ffffffffa0038535>] ? l2tp_xmit_skb+0x503/0x55a [l2tp_core] [ 940.026915] [<ffffffff812b8d3b>] ? pskb_expand_head+0x161/0x214 [ 940.026915] [<ffffffffa003e91d>] ? pppol2tp_xmit+0xf2/0x143 [l2tp_ppp] [ 940.026915] [<ffffffffa00292e0>] ? ppp_channel_push+0x36/0x8b [ppp_generic] [ 940.026915] [<ffffffffa00293fe>] ? ppp_write+0xaf/0xc5 [ppp_generic] [ 940.026915] [<ffffffff8110ead4>] ? vfs_write+0xa2/0x106 [ 940.026915] [<ffffffff8110edd6>] ? SyS_write+0x56/0x8a [ 940.026915] [<ffffffff81378ac0>] ? system_call_fastpath+0x16/0x1b [ 940.026915] Code: 00 49 8b 8f d8 00 00 00 66 83 7c 11 02 00 74 60 49 8b 47 58 48 83 e0 fe 48 8b 80 18 01 00 00 48 85 c0 74 13 48 8b 80 78 02 00 00 <48> ff 40 28 41 8b 57 68 48 01 50 30 48 8b 54 24 08 49 c7 c1 51 [ 940.026915] RIP [<ffffffff81333780>] ip6_xmit+0x276/0x326 [ 940.026915] RSP <ffff88000737fd28> [ 940.057945] ---[ end trace be8aba9a61c8b7f3 ]--- [ 940.058583] Kernel panic - not syncing: Fatal exception in interrupt Signed-off-by: François CACHEREUL <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2013-10-02net: do not call sock_put() on TIMEWAIT socketsEric Dumazet2-2/+2
commit 3ab5aee7fe84 ("net: Convert TCP & DCCP hash tables to use RCU / hlist_nulls") incorrectly used sock_put() on TIMEWAIT sockets. We should instead use inet_twsk_put() Signed-off-by: Eric Dumazet <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2013-10-02tcp: Always set options to 0 before calling tcp_established_optionsAndi Kleen1-0/+2
tcp_established_options assumes opts->options is 0 before calling, as it read modify writes it. For the tcp_current_mss() case the opts structure is not zeroed, so this can be done with uninitialized values. This is ok, because ->options is not read in this path. But it's still better to avoid the operation on the uninitialized field. This shuts up a static code analyzer, and presumably may help the optimizer. Cc: [email protected] Signed-off-by: Andi Kleen <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2013-10-02unix_diag: fix info leakMathias Krause1-0/+1
When filling the netlink message we miss to wipe the pad field, therefore leak one byte of heap memory to userland. Fix this by setting pad to 0. Signed-off-by: Mathias Krause <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2013-10-02netfilter: ipt_ULOG: fix info leaksMathias Krause1-6/+1
The ulog messages leak heap bytes by the means of padding bytes and incompletely filled string arrays. Fix those by memset(0)'ing the whole struct before filling it. Signed-off-by: Mathias Krause <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]>
2013-10-02netfilter: ebt_ulog: fix info leaksMathias Krause1-6/+3
The ulog messages leak heap bytes by the means of padding bytes and incompletely filled string arrays. Fix those by memset(0)'ing the whole struct before filling it. Signed-off-by: Mathias Krause <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.