| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
After the previous patches, at GRO time, skb->slow_gro is
usually 0, unless the packets comes from some H/W offload
slowpath or tunnel.
We can optimize the GRO code assuming !skb->slow_gro is likely.
This remove multiple conditionals in the most common path, at the
price of an additional one when we hit the above "slow-paths".
Signed-off-by: Paolo Abeni <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Similar to the previous one, but tracking the
active_extensions field status.
Signed-off-by: Paolo Abeni <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
We need to check up->dirmask to avoid shift-out-of-bounce bug,
since up->dirmask comes from userspace.
Also, added XFRM_USERPOLICY_DIRMASK_MAX constant to uapi to inform
user-space that up->dirmask has maximum possible value
Fixes: 2d151d39073a ("xfrm: Add possibility to set the default to block if we have no policy")
Reported-and-tested-by: [email protected]
Signed-off-by: Pavel Skripkin <[email protected]>
Signed-off-by: Steffen Klassert <[email protected]>
|
|
Daniel Borkmann says:
====================
pull-request: bpf 2021-07-29
The following pull-request contains BPF updates for your *net* tree.
We've added 9 non-merge commits during the last 14 day(s) which contain
a total of 20 files changed, 446 insertions(+), 138 deletions(-).
The main changes are:
1) Fix UBSAN out-of-bounds splat for showing XDP link fdinfo, from Lorenz Bauer.
2) Fix insufficient Spectre v4 mitigation in BPF runtime, from Daniel Borkmann,
Piotr Krysiuk and Benedict Schlueter.
3) Batch of fixes for BPF sockmap found under stress testing, from John Fastabend.
====================
Signed-off-by: David S. Miller <[email protected]>
|
|
This patch fixes the MGMT add_advertising command repsones with the
wrong opcode when it is trying to return the not supported error.
Fixes: cbbdfa6f33198 ("Bluetooth: Enable controller RPA resolution using Experimental feature")
Signed-off-by: Tedd Ho-Jeong An <[email protected]>
Signed-off-by: Luiz Augusto von Dentz <[email protected]>
|
|
syzbot is hitting might_sleep() warning at hci_sock_dev_event()
due to calling lock_sock() with rw spinlock held [1].
It seems that history of this locking problem is a trial and error.
Commit b40df5743ee8aed8 ("[PATCH] bluetooth: fix socket locking in
hci_sock_dev_event()") in 2.6.21-rc4 changed bh_lock_sock() to lock_sock()
as an attempt to fix lockdep warning.
Then, commit 4ce61d1c7a8ef4c1 ("[BLUETOOTH]: Fix locking in
hci_sock_dev_event().") in 2.6.22-rc2 changed lock_sock() to
local_bh_disable() + bh_lock_sock_nested() as an attempt to fix
sleep in atomic context warning.
Then, commit 4b5dd696f81b210c ("Bluetooth: Remove local_bh_disable() from
hci_sock.c") in 3.3-rc1 removed local_bh_disable().
Then, commit e305509e678b3a4a ("Bluetooth: use correct lock to prevent UAF
of hdev object") in 5.13-rc5 again changed bh_lock_sock_nested() to
lock_sock() as an attempt to fix CVE-2021-3573.
This difficulty comes from current implementation that
hci_sock_dev_event(HCI_DEV_UNREG) is responsible for dropping all
references from sockets because hci_unregister_dev() immediately reclaims
resources as soon as returning from hci_sock_dev_event(HCI_DEV_UNREG).
But the history suggests that hci_sock_dev_event(HCI_DEV_UNREG) was not
doing what it should do.
Therefore, instead of trying to detach sockets from device, let's accept
not detaching sockets from device at hci_sock_dev_event(HCI_DEV_UNREG),
by moving actual cleanup of resources from hci_unregister_dev() to
hci_release_dev() which is called by bt_host_release when all references
to this unregistered device (which is a kobject) are gone.
Link: https://syzkaller.appspot.com/bug?extid=a5df189917e79d5e59c9 [1]
Reported-by: syzbot <[email protected]>
Signed-off-by: Tetsuo Handa <[email protected]>
Tested-by: syzbot <[email protected]>
Fixes: e305509e678b3a4a ("Bluetooth: use correct lock to prevent UAF of hdev object")
Signed-off-by: Luiz Augusto von Dentz <[email protected]>
|
|
Currently the following script:
1. ip link add br0 type bridge vlan_filtering 1 && ip link set br0 up
2. ip link set swp2 up && ip link set swp2 master br0
3. ip link set swp3 up && ip link set swp3 master br0
4. ip link set swp4 up && ip link set swp4 master br0
5. bridge vlan del dev swp2 vid 1
6. bridge vlan del dev swp3 vid 1
7. ip link set swp4 nomaster
8. ip link set swp3 nomaster
produces the following output:
[ 641.010738] sja1105 spi0.1: port 2 failed to delete 00:1f:7b:63:02:48 vid 1 from fdb: -2
[ swp2, swp3 and br0 all have the same MAC address, the one listed above ]
In short, this happens because the number of FDB entry additions
notified to switchdev is unbalanced with the number of deletions.
At step 1, the bridge has a random MAC address. At step 2, the
br_fdb_replay of swp2 receives this initial MAC address. Then the bridge
inherits the MAC address of swp2 via br_fdb_change_mac_address(), and it
notifies switchdev (only swp2 at this point) of the deletion of the
random MAC address and the addition of 00:1f:7b:63:02:48 as a local FDB
entry with fdb->dst == swp2, in VLANs 0 and the default_pvid (1).
During step 7:
del_nbp
-> br_fdb_delete_by_port(br, p, vid=0, do_all=1);
-> fdb_delete_local(br, p, f);
br_fdb_delete_by_port() deletes all entries towards the ports,
regardless of vid, because do_all is 1.
fdb_delete_local() has logic to migrate local FDB entries deleted from
one port to another port which shares the same MAC address and is in the
same VLAN, or to the bridge device itself. This migration happens
without notifying switchdev of the deletion on the old port and the
addition on the new one, just fdb->dst is changed and the added_by_user
flag is cleared.
In the example above, the del_nbp(swp4) causes the
"addr 00:1f:7b:63:02:48 vid 1" local FDB entry with fdb->dst == swp4
that existed up until then to be migrated directly towards the bridge
(fdb->dst == NULL). This is because it cannot be migrated to any of the
other ports (swp2 and swp3 are not in VLAN 1).
After the migration to br0 takes place, swp4 requests a deletion replay
of all FDB entries. Since the "addr 00:1f:7b:63:02:48 vid 1" entry now
point towards the bridge, a deletion of it is replayed. There was just
a prior addition of this address, so the switchdev driver deletes this
entry.
Then, the del_nbp(swp3) at step 8 triggers another br_fdb_replay, and
switchdev is notified again to delete "addr 00:1f:7b:63:02:48 vid 1".
But it can't because it no longer has it, so it returns -ENOENT.
There are other possibilities to trigger this issue, but this is by far
the simplest to explain.
To fix this, we must avoid the situation where the addition of an FDB
entry is notified to switchdev as a local entry on a port, and the
deletion is notified on the bridge itself.
Considering that the 2 types of FDB entries are completely equivalent
and we cannot have the same MAC address as a local entry on 2 bridge
ports, or on a bridge port and pointing towards the bridge at the same
time, it makes sense to hide away from switchdev completely the fact
that a local FDB entry is associated with a given bridge port at all.
Just say that it points towards the bridge, it should make no difference
whatsoever to the switchdev driver and should even lead to a simpler
overall implementation, will less cases to handle.
This also avoids any modification at all to the core bridge driver, just
what is reported to switchdev changes. With the local/permanent entries
on bridge ports being already reported to user space, it is hard to
believe that the bridge behavior can change in any backwards-incompatible
way such as making all local FDB entries point towards the bridge.
Signed-off-by: Vladimir Oltean <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Currently when a switchdev port joins a bridge, we replay all FDB
entries pointing towards that port or towards the bridge.
However, this is insufficient in certain situations:
(a) DSA, through its assisted_learning_on_cpu_port logic, snoops
dynamically learned FDB entries on foreign interfaces.
These are FDB entries that are pointing neither towards the newly
joined switchdev port, nor towards the bridge. So these addresses
would be missed when joining a bridge where a foreign interface has
already learned some addresses, and they would also linger on if the
DSA port leaves the bridge before the foreign interface forgets them.
None of this happens if we replay the entire FDB when the port joins.
(b) There is a desire to treat local FDB entries on a port (i.e. the
port's termination MAC address) identically to FDB entries pointing
towards the bridge itself. More details on the reason behind this in
the next patch. The point is that this cannot be done given the
current structure of br_fdb_replay() in this situation:
ip link set swp0 master br0 # br0 inherits its MAC address from swp0
ip link set swp1 master br0
What is desirable is that when swp1 joins the bridge, br_fdb_replay()
also notifies swp1 of br0's MAC address, but this won't in fact
happen because the MAC address of br0 does not have fdb->dst == NULL
(it doesn't point towards the bridge), but it has fdb->dst == swp0.
So our current logic makes it impossible for that address to be
replayed. But if we dump the entire FDB instead of just the entries
with fdb->dst == swp1 and fdb->dst == NULL, then the inherited MAC
address of br0 will be replayed too, which is what we need.
A natural question arises: say there is an FDB entry to be replayed,
like a MAC address dynamically learned on a foreign interface that
belongs to a bridge where no switchdev port has joined yet. If 10
switchdev ports belonging to the same driver join this bridge, one by
one, won't every port get notified 10 times of the foreign FDB entry,
amounting to a total of 100 notifications for this FDB entry in the
switchdev driver?
Well, yes, but this is where the "void *ctx" argument for br_fdb_replay
is useful: every port of the switchdev driver is notified whenever any
other port requests an FDB replay, but because the replay was initiated
by a different port, its context is different from the initiating port's
context, so it ignores those replays.
So the foreign FDB entry will be installed only 10 times, once per port.
This is done so that the following 4 code paths are always well balanced:
(a) addition of foreign FDB entry is replayed when port joins bridge
(b) deletion of foreign FDB entry is replayed when port leaves bridge
(c) addition of foreign FDB entry is notified to all ports currently in bridge
(c) deletion of foreign FDB entry is notified to all ports currently in bridge
Signed-off-by: Vladimir Oltean <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
unix_gc() assumes that candidate sockets can never gain an external
reference (i.e. be installed into an fd) while the unix_gc_lock is
held. Except for MSG_PEEK this is guaranteed by modifying inflight
count under the unix_gc_lock.
MSG_PEEK does not touch any variable protected by unix_gc_lock (file
count is not), yet it needs to be serialized with garbage collection.
Do this by locking/unlocking unix_gc_lock:
1) increment file count
2) lock/unlock barrier to make sure incremented file count is visible
to garbage collection
3) install file into fd
This is a lock barrier (unlike smp_mb()) that ensures that garbage
collection is run completely before or completely after the barrier.
Cc: <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Miklos Szeredi <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Currently, when doing rate limiting using the tc-police(8) action, the
easiest way is to simply drop the packets which exceed or conform the
configured bandwidth limit. Add a new option to tc-skbmod(8), so that
users may use the ECN [1] extension to explicitly inform the receiver
about the congestion instead of dropping packets "on the floor".
The 2 least significant bits of the Traffic Class field in IPv4 and IPv6
headers are used to represent different ECN states [2]:
0b00: "Non ECN-Capable Transport", Non-ECT
0b10: "ECN Capable Transport", ECT(0)
0b01: "ECN Capable Transport", ECT(1)
0b11: "Congestion Encountered", CE
As an example:
$ tc filter add dev eth0 parent 1: protocol ip prio 10 \
matchall action skbmod ecn
Doing the above marks all ECT(0) and ECT(1) packets as CE. It does NOT
affect Non-ECT or non-IP packets. In the tc-police scenario mentioned
above, users may pipe a tc-police action and a tc-skbmod "ecn" action
together to achieve ECN-based rate limiting.
For TCP connections, upon receiving a CE packet, the receiver will respond
with an ECE packet, asking the sender to reduce their congestion window.
However ECN also works with other L4 protocols e.g. DCCP and SCTP [2], and
our implementation does not touch or care about L4 headers.
The updated tc-skbmod SYNOPSIS looks like the following:
tc ... action skbmod { set SETTABLE | swap SWAPPABLE | ecn } ...
Only one of "set", "swap" or "ecn" shall be used in a single tc-skbmod
command. Trying to use more than one of them at a time is considered
undefined behavior; pipe multiple tc-skbmod commands together instead.
"set" and "swap" only affect Ethernet packets, while "ecn" only affects
IPv{4,6} packets.
It is also worth mentioning that, in theory, the same effect could be
achieved by piping a "police" action and a "bpf" action using the
bpf_skb_ecn_set_ce() helper, but this requires eBPF programming from the
user, thus impractical.
Depends on patch "net/sched: act_skbmod: Skip non-Ethernet packets".
[1] https://datatracker.ietf.org/doc/html/rfc3168
[2] https://en.wikipedia.org/wiki/Explicit_Congestion_Notification
Reviewed-by: Cong Wang <[email protected]>
Signed-off-by: Peilin Ye <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
using same source and destination ip/port for flow hash calculation
within the two directions.
Signed-off-by: zhang kai <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Both registered flag and devlink pointer are set at the same time
and indicate the same thing - devlink/devlink_port are ready. Instead
of checking ->registered use devlink pointer as an indication.
Signed-off-by: Leon Romanovsky <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
As Ben Hutchings noticed, this check should have been inverted: the call
returns true in case of success.
Reported-by: Ben Hutchings <[email protected]>
Fixes: 0c5dc070ff3d ("sctp: validate from_addr_param return")
Signed-off-by: Marcelo Ricardo Leitner <[email protected]>
Reviewed-by: Xin Long <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
If backlog handler is running during a tear down operation we may enqueue
data on the ingress msg queue while tear down is trying to free it.
sk_psock_backlog()
sk_psock_handle_skb()
skb_psock_skb_ingress()
sk_psock_skb_ingress_enqueue()
sk_psock_queue_msg(psock,msg)
spin_lock(ingress_lock)
sk_psock_zap_ingress()
_sk_psock_purge_ingerss_msg()
_sk_psock_purge_ingress_msg()
-- free ingress_msg list --
spin_unlock(ingress_lock)
spin_lock(ingress_lock)
list_add_tail(msg,ingress_msg) <- entry on list with no one
left to free it.
spin_unlock(ingress_lock)
To fix we only enqueue from backlog if the ENABLED bit is set. The tear
down logic clears the bit with ingress_lock set so we wont enqueue the
msg in the last step.
Fixes: 799aa7f98d53 ("skmsg: Avoid lock_sock() in sk_psock_backlog()")
Signed-off-by: John Fastabend <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Acked-by: Jakub Sitnicki <[email protected]>
Acked-by: Martin KaFai Lau <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Its possible if a socket is closed and the receive thread is under memory
pressure it may have cached a skb. We need to ensure these skbs are
free'd along with the normal ingress_skb queue.
Before 799aa7f98d53 ("skmsg: Avoid lock_sock() in sk_psock_backlog()") tear
down and backlog processing both had sock_lock for the common case of
socket close or unhash. So it was not possible to have both running in
parrallel so all we would need is the kfree in those kernels.
But, latest kernels include the commit 799aa7f98d5e and this requires a
bit more work. Without the ingress_lock guarding reading/writing the
state->skb case its possible the tear down could run before the state
update causing it to leak memory or worse when the backlog reads the state
it could potentially run interleaved with the tear down and we might end up
free'ing the state->skb from tear down side but already have the reference
from backlog side. To resolve such races we wrap accesses in ingress_lock
on both sides serializing tear down and backlog case. In both cases this
only happens after an EAGAIN error case so having an extra lock in place
is likely fine. The normal path will skip the locks.
Note, we check state->skb before grabbing lock. This works because
we can only enqueue with the mutex we hold already. Avoiding a race
on adding state->skb after the check. And if tear down path is running
that is also fine if the tear down path then removes state->skb we
will simply set skb=NULL and the subsequent goto is skipped. This
slight complication avoids locking in normal case.
With this fix we no longer see this warning splat from tcp side on
socket close when we hit the above case with redirect to ingress self.
[224913.935822] WARNING: CPU: 3 PID: 32100 at net/core/stream.c:208 sk_stream_kill_queues+0x212/0x220
[224913.935841] Modules linked in: fuse overlay bpf_preload x86_pkg_temp_thermal intel_uncore wmi_bmof squashfs sch_fq_codel efivarfs ip_tables x_tables uas xhci_pci ixgbe mdio xfrm_algo xhci_hcd wmi
[224913.935897] CPU: 3 PID: 32100 Comm: fgs-bench Tainted: G I 5.14.0-rc1alu+ #181
[224913.935908] Hardware name: Dell Inc. Precision 5820 Tower/002KVM, BIOS 1.9.2 01/24/2019
[224913.935914] RIP: 0010:sk_stream_kill_queues+0x212/0x220
[224913.935923] Code: 8b 83 20 02 00 00 85 c0 75 20 5b 5d 41 5c 41 5d 41 5e 41 5f c3 48 89 df e8 2b 11 fe ff eb c3 0f 0b e9 7c ff ff ff 0f 0b eb ce <0f> 0b 5b 5d 41 5c 41 5d 41 5e 41 5f c3 90 0f 1f 44 00 00 41 57 41
[224913.935932] RSP: 0018:ffff88816271fd38 EFLAGS: 00010206
[224913.935941] RAX: 0000000000000ae8 RBX: ffff88815acd5240 RCX: dffffc0000000000
[224913.935948] RDX: 0000000000000003 RSI: 0000000000000ae8 RDI: ffff88815acd5460
[224913.935954] RBP: ffff88815acd5460 R08: ffffffff955c0ae8 R09: fffffbfff2e6f543
[224913.935961] R10: ffffffff9737aa17 R11: fffffbfff2e6f542 R12: ffff88815acd5390
[224913.935967] R13: ffff88815acd5480 R14: ffffffff98d0c080 R15: ffffffff96267500
[224913.935974] FS: 00007f86e6bd1700(0000) GS:ffff888451cc0000(0000) knlGS:0000000000000000
[224913.935981] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[224913.935988] CR2: 000000c0008eb000 CR3: 00000001020e0005 CR4: 00000000003706e0
[224913.935994] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[224913.936000] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[224913.936007] Call Trace:
[224913.936016] inet_csk_destroy_sock+0xba/0x1f0
[224913.936033] __tcp_close+0x620/0x790
[224913.936047] tcp_close+0x20/0x80
[224913.936056] inet_release+0x8f/0xf0
[224913.936070] __sock_release+0x72/0x120
[224913.936083] sock_close+0x14/0x20
Fixes: a136678c0bdbb ("bpf: sk_msg, zap ingress queue on psock down")
Signed-off-by: John Fastabend <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Acked-by: Jakub Sitnicki <[email protected]>
Acked-by: Martin KaFai Lau <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
We don't want strparser to run and pass skbs into skmsg handlers when
the psock is null. We just sk_drop them in this case. When removing
a live socket from map it means extra drops that we do not need to
incur. Move the zap below strparser close to avoid this condition.
This way we stop the stream parser first stopping it from processing
packets and then delete the psock.
Fixes: a136678c0bdbb ("bpf: sk_msg, zap ingress queue on psock down")
Signed-off-by: John Fastabend <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Acked-by: Jakub Sitnicki <[email protected]>
Acked-by: Martin KaFai Lau <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Syzbot reported warning in netlbl_cipsov4_add(). The
problem was in too big doi_def->map.std->lvl.local_size
passed to kcalloc(). Since this value comes from userpace there is
no need to warn if value is not correct.
The same problem may occur with other kcalloc() calls in
this function, so, I've added __GFP_NOWARN flag to all
kcalloc() calls there.
Reported-and-tested-by: [email protected]
Fixes: 96cb8e3313c7 ("[NetLabel]: CIPSOv4 and Unlabeled packet integration")
Acked-by: Paul Moore <[email protected]>
Signed-off-by: Pavel Skripkin <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
All other user triggered operations are gone from ndo_ioctl, so move
the SIOCBOND family into a custom operation as well.
The .ndo_ioctl() helper is no longer called by the dev_ioctl.c code now,
but there are still a few definitions in obsolete wireless drivers as well
as the appletalk and ieee802154 layers to call SIOCSIFADDR/SIOCGIFADDR
helpers from inside the kernel.
Cc: Jay Vosburgh <[email protected]>
Cc: Veaceslav Falico <[email protected]>
Cc: Andy Gospodarek <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Working towards obsoleting the .ndo_do_ioctl operation entirely,
stop passing the SIOCBRADDIF/SIOCBRDELIF device ioctl commands
into this callback.
My first attempt was to add another ndo_siocbr() callback, but
as there is only a single driver that takes these commands and
there is already a hook mechanism to call directly into this
driver, extend this hook instead, and use it for both the
deviceless and the device specific ioctl commands.
Cc: Roopa Prabhu <[email protected]>
Cc: Nikolay Aleksandrov <[email protected]>
Cc: [email protected]
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Some drivers that use SIOCDEVPRIVATE ioctl commands modify
the ifreq structure and expect it to be passed back to user
space, which has never really happened for compat mode
because the calling these drivers through ndo_do_ioctl
requires overwriting the ifr_data pointer.
Now that all drivers are converted to ndo_siocdevprivate,
change it to handle this correctly in both compat and
native mode.
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
In order to further reduce the scope of ndo_do_ioctl(), move
out the SIOCWANDEV handling into a new network device operation
function.
Adjust the prototype to only pass the if_settings sub-structure
in place of the ifreq, and remove the redundant 'cmd' argument
in the process.
Cc: Krzysztof Halasa <[email protected]>
Cc: "Jan \"Yenya\" Kasprzak" <[email protected]>
Cc: Kevin Curtis <[email protected]>
Cc: Zhao Qiang <[email protected]>
Cc: Martin Schiller <[email protected]>
Cc: Jiri Slaby <[email protected]>
Cc: [email protected]
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Most users of ndo_do_ioctl are ethernet drivers that implement
the MII commands SIOCGMIIPHY/SIOCGMIIREG/SIOCSMIIREG, or hardware
timestamping with SIOCSHWTSTAMP/SIOCGHWTSTAMP.
Separate these from the few drivers that use ndo_do_ioctl to
implement SIOCBOND, SIOCBR and SIOCWANDEV commands.
This is a purely cosmetic change intended to help readers find
their way through the implementation.
Cc: Doug Ledford <[email protected]>
Cc: Jason Gunthorpe <[email protected]>
Cc: Jay Vosburgh <[email protected]>
Cc: Veaceslav Falico <[email protected]>
Cc: Andy Gospodarek <[email protected]>
Cc: Andrew Lunn <[email protected]>
Cc: Vivien Didelot <[email protected]>
Cc: Florian Fainelli <[email protected]>
Cc: Vladimir Oltean <[email protected]>
Cc: Leon Romanovsky <[email protected]>
Cc: [email protected]
Signed-off-by: Arnd Bergmann <[email protected]>
Acked-by: Jason Gunthorpe <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
The compat handlers for SIOCDEVPRIVATE are incorrect for any driver that
passes data as part of struct ifreq rather than as an ifr_data pointer, or
that passes data back this way, since the compat_ifr_data_ioctl() helper
overwrites the ifr_data pointer and does not copy anything back out.
Since all drivers using devprivate commands are now converted to the
new .ndo_siocdevprivate callback, fix this by adding the missing piece
and passing the pointer separately the whole way.
This further unifies the native and compat logic for socket ioctls,
as the new code now passes the correct pointer as well as the correct
data for both native and compat ioctls.
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
The various ipv4 and ipv6 tunnel drivers each implement a set
of 12 SIOCDEVPRIVATE commands for managing tunnels. These
all work correctly in compat mode.
Move them over to the new .ndo_siocdevprivate operation.
Cc: Hideaki YOSHIFUJI <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Steffen Klassert <[email protected]>
Cc: Herbert Xu <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
phonet has a single private ioctl that is broken in compat
mode on big-endian machines today because the data returned
from it is never copied back to user space.
Move it over to the ndo_siocdevprivate callback, which also
fixes the compat issue.
Cc: Remi Denis-Courmont <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
Acked-by: Rémi Denis-Courmont <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
The bridge driver has an old set of ioctls using the SIOCDEVPRIVATE
namespace that have never worked in compat mode and are explicitly
forbidden already.
Move them over to ndo_siocdevprivate and fix compat mode for these,
because we can.
Cc: Roopa Prabhu <[email protected]>
Cc: Nikolay Aleksandrov <[email protected]>
Cc: [email protected]
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
SIOCDEVPRIVATE ioctl commands are mainly used in really old
drivers, and they have a number of problems:
- They hide behind the normal .ndo_do_ioctl function that
is also used for other things in modern drivers, so it's
hard to spot a driver that actually uses one of these
- Since drivers use a number different calling conventions,
it is impossible to support compat mode for them in
a generic way.
- With all drivers using the same 16 commands codes, there
is no way to introspect the data being passed through
things like strace.
Add a new net_device_ops callback pointer, to address the
first two of these. Separating them from .ndo_do_ioctl
makes it easy to grep for drivers with a .ndo_siocdevprivate
callback, and the unwieldy name hopefully makes it easier
to spot in code review.
By passing the ifreq structure and the ifr_data pointer
separately, it is no longer necessary to overload these,
and the driver can use either one for a given command.
Cc: Cong Wang <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Previously, a DSACK could expand the RACK reordering window when no
reordering has been seen, and/or when the DSACK was due to an
unnecessary TLP retransmit (rather than a spurious fast recovery due
to reordering). This could result in unnecessarily growing the RACK
reordering window and thus unnecessarily delaying RACK-based fast
recovery episodes.
To avoid these issues, this commit tightens the conditions under which
a DSACK triggers the RACK reordering window to grow, so that a
connection only expands its RACK reordering window if:
(a) reordering has been seen in the connection
(b) a DSACKed range does not match the most recent TLP retransmit
Signed-off-by: Neal Cardwell <[email protected]>
Acked-by: Yuchung Cheng <[email protected]>
Acked-by: Priyaranjan Jha <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Previously TLP is considered spurious if the sender receives any
DSACK during a TLP episode. This patch further checks the DSACK
sequences match the TLP's to improve accuracy.
Signed-off-by: Yuchung Cheng <[email protected]>
Acked-by: Neal Cardwell <[email protected]>
Acked-by: Priyaranjan Jha <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
This patch addresses the following problems:
- priv can never be NULL, so this part of the check is useless
- if the loop ran through the whole list, priv->client is invalid and
it is more appropriate and sufficient to check for the end of
list_for_each_entry loop condition.
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Harshvardhan Jha <[email protected]>
Reviewed-by: Stefano Stabellini <[email protected]>
Tested-by: Stefano Stabellini <[email protected]>
Cc: <[email protected]>
Signed-off-by: Dominique Martinet <[email protected]>
|
|
This ensures we don't leak the sysfs file if we failed to
allocate chan->vc_wq during probe.
Link: http://lkml.kernel.org/r/[email protected]
Fixes: 86c8437383ac ("net/9p: Add sysfs mount_tag file for virtio 9P device")
Signed-off-by: Xie Yongji <[email protected]>
Signed-off-by: Dominique Martinet <[email protected]>
|
|
Syzbot reported skb_over_panic() in llc_pdu_init_as_xid_cmd(). The
problem was in wrong LCC header manipulations.
Syzbot's reproducer tries to send XID packet. llc_ui_sendmsg() is
doing following steps:
1. skb allocation with size = len + header size
len is passed from userpace and header size
is 3 since addr->sllc_xid is set.
2. skb_reserve() for header_len = 3
3. filling all other space with memcpy_from_msg()
Ok, at this moment we have fully loaded skb, only headers needs to be
filled.
Then code comes to llc_sap_action_send_xid_c(). This function pushes 3
bytes for LLC PDU header and initializes it. Then comes
llc_pdu_init_as_xid_cmd(). It initalizes next 3 bytes *AFTER* LLC PDU
header and call skb_push(skb, 3). This looks wrong for 2 reasons:
1. Bytes rigth after LLC header are user data, so this function
was overwriting payload.
2. skb_push(skb, 3) call can cause skb_over_panic() since
all free space was filled in llc_ui_sendmsg(). (This can
happen is user passed 686 len: 686 + 14 (eth header) + 3 (LLC
header) = 703. SKB_DATA_ALIGN(703) = 704)
So, in this patch I added 2 new private constansts: LLC_PDU_TYPE_U_XID
and LLC_PDU_LEN_U_XID. LLC_PDU_LEN_U_XID is used to correctly reserve
header size to handle LLC + XID case. LLC_PDU_TYPE_U_XID is used by
llc_pdu_header_init() function to push 6 bytes instead of 3. And finally
I removed skb_push() call from llc_pdu_init_as_xid_cmd().
This changes should not affect other parts of LLC, since after
all steps we just transmit buffer.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-and-tested-by: [email protected]
Signed-off-by: Pavel Skripkin <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
fix incorrect type in argument 1 (different address spaces)
../net/openvswitch/datapath.c:169:17: warning: incorrect type in argument 1 (different address spaces)
../net/openvswitch/datapath.c:169:17: expected void const *
../net/openvswitch/datapath.c:169:17: got struct dp_nlsk_pids [noderef] __rcu *upcall_portids
Found at: https://patchwork.kernel.org/project/netdevbpf/patch/[email protected]/#24285159
Signed-off-by: Mark Gray <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Signed-off-by: Mark Gray <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Add the case when nlh is NULL in nlmsg_report(),
so that the caller doesn't need to deal with this case.
Signed-off-by: Yajun Deng <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
put_tty_driver() is an alias for tty_driver_kref_put(). There is no need
for two exported identical functions, therefore switch all users of
old put_tty_driver() to new tty_driver_kref_put() and remove the former
for good.
Cc: Richard Henderson <[email protected]>
Cc: Ivan Kokshaysky <[email protected]>
Cc: Matt Turner <[email protected]>
Cc: Geert Uytterhoeven <[email protected]>
Cc: Jeff Dike <[email protected]>
Cc: Richard Weinberger <[email protected]>
Cc: Anton Ivanov <[email protected]>
Cc: Chris Zankel <[email protected]>
Cc: Max Filippov <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Cc: Samuel Iglesias Gonsalvez <[email protected]>
Cc: Jens Taprogge <[email protected]>
Cc: Karsten Keil <[email protected]>
Cc: Scott Branden <[email protected]>
Cc: Ulf Hansson <[email protected]>
Cc: "David S. Miller" <[email protected]>
Cc: Jakub Kicinski <[email protected]>
Cc: Heiko Carstens <[email protected]>
Cc: Vasily Gorbik <[email protected]>
Cc: Christian Borntraeger <[email protected]>
Cc: David Lin <[email protected]>
Cc: Johan Hovold <[email protected]>
Cc: Alex Elder <[email protected]>
Cc: Jiri Slaby <[email protected]>
Cc: Laurentiu Tudor <[email protected]>
Cc: Jiri Kosina <[email protected]>
Cc: David Sterba <[email protected]>
Cc: Shawn Guo <[email protected]>
Cc: Sascha Hauer <[email protected]>
Cc: Pengutronix Kernel Team <[email protected]>
Cc: Fabio Estevam <[email protected]>
Cc: NXP Linux Team <[email protected]>
Cc: Oliver Neukum <[email protected]>
Cc: Felipe Balbi <[email protected]>
Cc: Mathias Nyman <[email protected]>
Cc: Marcel Holtmann <[email protected]>
Cc: Johan Hedberg <[email protected]>
Cc: Luiz Augusto von Dentz <[email protected]>
Acked-by: Alex Elder <[email protected]>
Acked-by: Christian Borntraeger <[email protected]>
Acked-by: Max Filippov <[email protected]>
Acked-by: David Sterba <[email protected]>
Acked-by: Samuel Iglesias Gonsálvez <[email protected]>
Signed-off-by: Jiri Slaby <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
alloc_tty_driver was deprecated by tty_alloc_driver in commit
7f0bc6a68ed9 (TTY: pass flags to alloc_tty_driver) in 2012.
I never got into eliminating alloc_tty_driver until now. So we still
have two functions for allocating drivers which might be confusing. So
get rid of alloc_tty_driver uses to eliminate it for good in the next
patch.
Note we need to switch return value checking as tty_alloc_driver uses
ERR_PTR. And flags are now a parameter of tty_alloc_driver.
Cc: Richard Henderson <[email protected]>(odd fixer:ALPHA PORT)
Cc: Ivan Kokshaysky <[email protected]>
Cc: Matt Turner <[email protected]>
Cc: Geert Uytterhoeven <[email protected]>
Cc: "James E.J. Bottomley" <[email protected]>
Cc: Helge Deller <[email protected]>
Cc: Jeff Dike <[email protected]>
Cc: Richard Weinberger <[email protected]>
Cc: Anton Ivanov <[email protected]>
Cc: Chris Zankel <[email protected]>
Cc: Max Filippov <[email protected]>
Cc: Samuel Iglesias Gonsalvez <[email protected]>
Cc: Jens Taprogge <[email protected]>
Cc: Karsten Keil <[email protected]>
Cc: Ulf Hansson <[email protected]>
Cc: "David S. Miller" <[email protected]>
Cc: Jakub Kicinski <[email protected]>
Cc: Heiko Carstens <[email protected]>
Cc: Vasily Gorbik <[email protected]>
Cc: Christian Borntraeger <[email protected]>
Cc: Laurentiu Tudor <[email protected]>
Cc: Jiri Kosina <[email protected]>
Cc: David Sterba <[email protected]>
Cc: Shawn Guo <[email protected]>
Cc: Sascha Hauer <[email protected]>
Cc: Oliver Neukum <[email protected]>
Cc: Felipe Balbi <[email protected]>
Cc: Johan Hovold <[email protected]>
Cc: Marcel Holtmann <[email protected]>
Cc: Johan Hedberg <[email protected]>
Cc: Luiz Augusto von Dentz <[email protected]>
Acked-by: Samuel Iglesias Gonsálvez <[email protected]>
Acked-by: Max Filippov <[email protected]>
Acked-by: David Sterba <[email protected]>
Acked-by: Christian Borntraeger <[email protected]>
Signed-off-by: Jiri Slaby <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
In the cited commit, copy_to_user() got called with the wrong pointer,
instead of passing the actual buffer ptr to copy from, a pointer to
the pointer got passed, which causes a buffer overflow calltrace to pop
up when executing "ethtool -x ethX".
Fix ethtool_rxnfc_copy_to_user() to use the rxnfc pointer as passed
to the function, instead of a pointer to it.
This fixes below call trace:
[ 15.533533] ------------[ cut here ]------------
[ 15.539007] Buffer overflow detected (8 < 192)!
[ 15.544110] WARNING: CPU: 3 PID: 1801 at include/linux/thread_info.h:200 copy_overflow+0x15/0x20
[ 15.549308] Modules linked in:
[ 15.551449] CPU: 3 PID: 1801 Comm: ethtool Not tainted 5.14.0-rc2+ #1058
[ 15.553919] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
[ 15.558378] RIP: 0010:copy_overflow+0x15/0x20
[ 15.560648] Code: e9 7c ff ff ff b8 a1 ff ff ff eb c4 66 0f 1f 84 00 00 00 00 00 55 48 89 f2 89 fe 48 c7 c7 88 55 78 8a 48 89 e5 e8 06 5c 1e 00 <0f> 0b 5d c3 0f 1f 80 00 00 00 00 0f 1f 44 00 00 55 48 89 e5 41 55
[ 15.565114] RSP: 0018:ffffad49c0523bd0 EFLAGS: 00010286
[ 15.566231] RAX: 0000000000000000 RBX: 00000000000000c0 RCX: 0000000000000000
[ 15.567616] RDX: 0000000000000001 RSI: ffffffff8a7912e7 RDI: 00000000ffffffff
[ 15.569050] RBP: ffffad49c0523bd0 R08: ffffffff8ab2ae28 R09: 00000000ffffdfff
[ 15.570534] R10: ffffffff8aa4ae40 R11: ffffffff8aa4ae40 R12: 0000000000000000
[ 15.571899] R13: 00007ffd4cc2a230 R14: ffffad49c0523c00 R15: 0000000000000000
[ 15.573584] FS: 00007f538112f740(0000) GS:ffff96d5bdd80000(0000) knlGS:0000000000000000
[ 15.575639] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 15.577092] CR2: 00007f5381226d40 CR3: 0000000013542000 CR4: 00000000001506e0
[ 15.578929] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 15.580695] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 15.582441] Call Trace:
[ 15.582970] ethtool_rxnfc_copy_to_user+0x30/0x46
[ 15.583815] ethtool_get_rxnfc.cold+0x23/0x2b
[ 15.584584] dev_ethtool+0x29c/0x25f0
[ 15.585286] ? security_netlbl_sid_to_secattr+0x77/0xd0
[ 15.586728] ? do_set_pte+0xc4/0x110
[ 15.587349] ? _raw_spin_unlock+0x18/0x30
[ 15.588118] ? __might_sleep+0x49/0x80
[ 15.588956] dev_ioctl+0x2c1/0x490
[ 15.589616] sock_ioctl+0x18e/0x330
[ 15.591143] __x64_sys_ioctl+0x41c/0x990
[ 15.591823] ? irqentry_exit_to_user_mode+0x9/0x20
[ 15.592657] ? irqentry_exit+0x33/0x40
[ 15.593308] ? exc_page_fault+0x32f/0x770
[ 15.593877] ? exit_to_user_mode_prepare+0x3c/0x130
[ 15.594775] do_syscall_64+0x35/0x80
[ 15.595397] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 15.596037] RIP: 0033:0x7f5381226d4b
[ 15.596492] Code: 0f 1e fa 48 8b 05 3d b1 0c 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 0f 1f 44 00 00 f3 0f 1e fa b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 0d b1 0c 00 f7 d8 64 89 01 48
[ 15.598743] RSP: 002b:00007ffd4cc2a1f8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
[ 15.599804] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f5381226d4b
[ 15.600795] RDX: 00007ffd4cc2a350 RSI: 0000000000008946 RDI: 0000000000000003
[ 15.601712] RBP: 00007ffd4cc2a340 R08: 00007ffd4cc2a350 R09: 0000000000000001
[ 15.602751] R10: 00007f538128a990 R11: 0000000000000246 R12: 0000000000000000
[ 15.603882] R13: 00007ffd4cc2a350 R14: 00007ffd4cc2a4b0 R15: 0000000000000000
[ 15.605042] ---[ end trace 325cf185e2795048 ]---
Fixes: dd98d2895de6 ("ethtool: improve compat ioctl handling")
Reported-by: Shannon Nelson <[email protected]>
CC: Arnd Bergmann <[email protected]>
CC: Christoph Hellwig <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
Tested-by: Shannon Nelson <[email protected]>
Acked-by: Arnd Bergmann <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Fix the following out-of-bounds warnings:
net/core/flow_dissector.c: In function '__skb_flow_dissect':
>> net/core/flow_dissector.c:1104:4: warning: 'memcpy' offset [24, 39] from the object at '<unknown>' is out of the bounds of referenced subobject 'saddr' with type 'struct in6_addr' at offset 8 [-Warray-bounds]
1104 | memcpy(&key_addrs->v6addrs, &iph->saddr,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1105 | sizeof(key_addrs->v6addrs));
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from include/linux/ipv6.h:5,
from net/core/flow_dissector.c:6:
include/uapi/linux/ipv6.h:133:18: note: subobject 'saddr' declared here
133 | struct in6_addr saddr;
| ^~~~~
>> net/core/flow_dissector.c:1059:4: warning: 'memcpy' offset [16, 19] from the object at '<unknown>' is out of the bounds of referenced subobject 'saddr' with type 'unsigned int' at offset 12 [-Warray-bounds]
1059 | memcpy(&key_addrs->v4addrs, &iph->saddr,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1060 | sizeof(key_addrs->v4addrs));
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from include/linux/ip.h:17,
from net/core/flow_dissector.c:5:
include/uapi/linux/ip.h:103:9: note: subobject 'saddr' declared here
103 | __be32 saddr;
| ^~~~~
The problem is that the original code is trying to copy data into a
couple of struct members adjacent to each other in a single call to
memcpy(). So, the compiler legitimately complains about it. As these
are just a couple of members, fix this by copying each one of them in
separate calls to memcpy().
This helps with the ongoing efforts to globally enable -Warray-bounds
and get us closer to being able to tighten the FORTIFY_SOURCE routines
on memcpy().
Link: https://github.com/KSPP/linux/issues/109
Reported-by: kernel test robot <[email protected]>
Link: https://lore.kernel.org/lkml/[email protected]/
Signed-off-by: Gustavo A. R. Silva <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Fix the following out-of-bounds warning:
In function 'ip_copy_addrs',
inlined from '__ip_queue_xmit' at net/ipv4/ip_output.c:517:2:
net/ipv4/ip_output.c:449:2: warning: 'memcpy' offset [40, 43] from the object at 'fl' is out of the bounds of referenced subobject 'saddr' with type 'unsigned int' at offset 36 [-Warray-bounds]
449 | memcpy(&iph->saddr, &fl4->saddr,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
450 | sizeof(fl4->saddr) + sizeof(fl4->daddr));
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
The problem is that the original code is trying to copy data into a
couple of struct members adjacent to each other in a single call to
memcpy(). This causes a legitimate compiler warning because memcpy()
overruns the length of &iph->saddr and &fl4->saddr. As these are just
a couple of struct members, fix this by using direct assignments,
instead of memcpy().
This helps with the ongoing efforts to globally enable -Warray-bounds
and get us closer to being able to tighten the FORTIFY_SOURCE routines
on memcpy().
Link: https://github.com/KSPP/linux/issues/109
Reported-by: kernel test robot <[email protected]>
Link: https://lore.kernel.org/lkml/[email protected]/
Signed-off-by: Gustavo A. R. Silva <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
port from"
This reverts commit cc1939e4b3aaf534fb2f3706820012036825731c.
Currently 2 classes of DSA drivers are able to send/receive packets
directly through the DSA master:
- drivers with DSA_TAG_PROTO_NONE
- sja1105
Now that sja1105 has gained the ability to perform traffic termination
even under the tricky case (VLAN-aware bridge), and that is much more
functional (we can perform VLAN-aware bridging with foreign interfaces),
there is no reason to keep this code in the receive path of the network
core. So delete it.
Signed-off-by: Vladimir Oltean <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
The main desire for having this feature in sja1105 is to support network
stack termination for traffic coming from a VLAN-aware bridge.
For sja1105, offloading the bridge data plane means sending packets
as-is, with the proper VLAN tag, to the chip. The chip will look up its
FDB and forward them to the correct destination port.
But we support bridge data plane offload even for VLAN-unaware bridges,
and the implementation there is different. In fact, VLAN-unaware
bridging is governed by tag_8021q, so it makes sense to have the
.bridge_fwd_offload_add() implementation fully within tag_8021q.
The key difference is that we only support 1 VLAN-aware bridge, but we
support multiple VLAN-unaware bridges. So we need to make sure that the
forwarding domain is not crossed by packets injected from the stack.
For this, we introduce the concept of a tag_8021q TX VLAN for bridge
forwarding offload. As opposed to the regular TX VLANs which contain
only 2 ports (the user port and the CPU port), a bridge data plane TX
VLAN is "multicast" (or "imprecise"): it contains all the ports that are
part of a certain bridge, and the hardware will select where the packet
goes within this "imprecise" forwarding domain.
Each VLAN-unaware bridge has its own "imprecise" TX VLAN, so we make use
of the unique "bridge_num" provided by DSA for the data plane offload.
We use the same 3 bits from the tag_8021q VLAN ID format to encode this
bridge number.
Note that these 3 bit positions have been used before for sub-VLANs in
best-effort VLAN filtering mode. The difference is that for best-effort,
the sub-VLANs were only valid on RX (and it was documented that the
sub-VLAN field needed to be transmitted as zero). Whereas for the bridge
data plane offload, these 3 bits are only valid on TX.
Signed-off-by: Vladimir Oltean <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
This is already common knowledge by now, but the sja1105 does not have
hardware support for DSA tagging for data plane packets, and tag_8021q
sets up a unique pvid per port, transmitted as VLAN-tagged towards the
CPU, for the source port to be decoded nonetheless.
When the port is part of a VLAN-aware bridge, the pvid committed to
hardware is taken from the bridge and not from tag_8021q, so we need to
work with that the best we can.
Configure the switches to send all packets to the CPU as VLAN-tagged
(even ones that were originally untagged on the wire) and make use of
dsa_untag_bridge_pvid() to get rid of it before we send those packets up
the network stack.
With the classified VLAN used by hardware known to the tagger, we first
peek at the VID in an attempt to figure out if the packet was received
from a VLAN-unaware port (standalone or under a VLAN-unaware bridge),
case in which we can continue to call dsa_8021q_rcv(). If that is not
the case, the packet probably came from a VLAN-aware bridge. So we call
the DSA helper that finds for us a "designated bridge port" - one that
is a member of the VLAN ID from the packet, and is in the proper STP
state - basically these are all checks performed by br_handle_frame() in
the software RX data path.
The bridge will accept the packet as valid even if the source port was
maybe wrong. So it will maybe learn the MAC SA of the packet on the
wrong port, and its software FDB will be out of sync with the hardware
FDB. So replies towards this same MAC DA will not work, because the
bridge will send towards a different netdev.
This is where the bridge data plane offload ("imprecise TX") added by
the next patch comes in handy. The software FDB is wrong, true, but the
hardware FDB isn't, and by offloading the bridge forwarding plane we
have a chance to right a wrong, and have the hardware look up the FDB
for us for the reply packet. So it all cancels out.
Signed-off-by: Vladimir Oltean <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Introduce a brother of br_vlan_get_info() which is protected by the RCU
mechanism, as opposed to br_vlan_get_info() which relies on taking the
write-side rtnl_mutex.
This is needed for drivers which need to find out whether a bridge port
has a VLAN configured or not. For example, certain DSA switches might
not offer complete source port identification to the CPU on RX, just the
VLAN in which the packet was received. Based on this VLAN, we cannot set
an accurate skb->dev ingress port, but at least we can configure one
that behaves the same as the correct one would (this is possible because
DSA sets skb->offload_fwd_mark = 1).
When we look at the bridge RX handler (br_handle_frame), we see that
what matters regarding skb->dev is the VLAN ID and the port STP state.
So we need to select an skb->dev that has the same bridge VLAN as the
packet we're receiving, and is in the LEARNING or FORWARDING STP state.
The latter is easy, but for the former, we should somehow keep a shadow
list of the bridge VLANs on each port, and a lookup table between VLAN
ID and the 'designated port for imprecise RX'. That is rather
complicated to keep in sync properly (the designated port per VLAN needs
to be updated on the addition and removal of a VLAN, as well as on the
join/leave events of the bridge on that port).
So, to avoid all that complexity, let's just iterate through our finite
number of ports and ask the bridge, for each packet: "do you have this
VLAN configured on this port?".
Cc: Roopa Prabhu <[email protected]>
Cc: Nikolay Aleksandrov <[email protected]>
Cc: Ido Schimmel <[email protected]>
Cc: Jiri Pirko <[email protected]>
Signed-off-by: Vladimir Oltean <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
br_vlan_filter_toggle
SWITCHDEV_ATTR_ID_BRIDGE_VLAN_FILTERING is notified by the bridge from
two places:
- nbp_vlan_init(), during bridge port creation
- br_vlan_filter_toggle(), during a netlink/sysfs/ioctl change requested
by user space
If a switchdev driver uses br_vlan_enabled(br_dev) inside its handler
for the SWITCHDEV_ATTR_ID_BRIDGE_VLAN_FILTERING attribute notifier,
different things will be seen depending on whether the bridge calls from
the first path or the second:
- in nbp_vlan_init(), br_vlan_enabled() reflects the current state of
the bridge
- in br_vlan_filter_toggle(), br_vlan_enabled() reflects the past state
of the bridge
This can lead in some cases to complications in driver implementation,
which can be avoided if these could reliably use br_vlan_enabled().
Nothing seems to depend on this behavior, and it seems overall more
straightforward for br_vlan_enabled() to return the proper value even
during the SWITCHDEV_ATTR_ID_BRIDGE_VLAN_FILTERING notifier, so
temporarily enable the bridge option, then revert it if the switchdev
notifier failed.
Cc: Roopa Prabhu <[email protected]>
Cc: Nikolay Aleksandrov <[email protected]>
Cc: Ido Schimmel <[email protected]>
Cc: Jiri Pirko <[email protected]>
Signed-off-by: Vladimir Oltean <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next
linux-can-next-for-5.15-20210725
Marc Kleine-Budde says:
====================
pull-request: can-next 2021-07-25
this is a pull request of 46 patches for net-next/master.
The first 6 patches target the CAN J1939 protocol. One is from
gushengxian, fixing a grammatical error, 5 are by me fixing a checkpatch
warning, make use of the fallthrough pseudo-keyword, and use
consistent variable naming.
The next 3 patches target the rx-offload helper, are by me and improve
the performance and fix the local softirq work pending error, when
napi_schedule() is called from threaded IRQ context.
The next 3 patches are by Vincent Mailhol and me update the CAN
bittiming and transmitter delay compensation, the documentation for
the struct can_tdc is fixed, clear data_bittiming if FD mode is turned
off and a redundant check is removed.
Followed by 4 patches targeting the m_can driver. Faiz Abbas's patches
add support for CAN PHY via the generic phy subsystem. Yang Yingliang
converts the driver to use devm_platform_ioremap_resource_byname().
And a patch by me which removes the unused support for custom bit
timing.
Andy Shevchenko contributes 2 patches for the mcp251xfd driver to
prepare the driver for ACPI support. A patch by me adds support for
shared IRQ handlers.
Zhen Lei contributes 3 patches to convert the esd_usb2, janz-ican3 and
the at91_can driver to make use of the DEVICE_ATTR_RO/RW() macros.
The next 8 patches are by Peng Li and provide general cleanups for the
at91_can driver.
The next 7 patches target the peak driver. Frist 2 cleanup patches by
me for the peak_pci driver, followed by Stephane Grosjean' patch to
print the name and firmware version of the detected hardware. The
peak_usb driver gets a cleanup patch, loopback and one-shot mode and
an upgrading of the bus state change handling in Stephane Grosjean's
patches.
Vincent Mailhol provides 6 cleanup patches for the etas_es58x driver.
In the last 3 patches Angelo Dureghello add support for the mcf5441x
SoC to the flexcan driver.
====================
Signed-off-by: David S. Miller <[email protected]>
|
|
sctp_inet6addr_event deletes 'addr' from 'local_addr_list' when setting
netdev down, but it is possible to delete the incorrect entry (match
the first one with the same ipaddr, but the different 'ifindex'), if
there are some netdevs with the same 'local-link' ipaddr added already.
It should delete the entry depending on 'sin6_addr' and 'sin6_scope_id'
both. otherwise, the endpoint will call 'sctp_sf_ootb' if it can't find
the according association when receives 'heartbeat', and finally will
reply 'abort'.
For example:
1.when linux startup
the entries in local_addr_list:
ifindex:35 addr:fe80::40:43ff:fe80:0 (eths0.201)
ifindex:36 addr:fe80::40:43ff:fe80:0 (eths0.209)
ifindex:37 addr:fe80::40:43ff:fe80:0 (eths0.210)
the route table:
local fe80::40:43ff:fe80:0 dev eths0.201
local fe80::40:43ff:fe80:0 dev eths0.209
local fe80::40:43ff:fe80:0 dev eths0.210
2.after 'ifconfig eths0.209 down'
the entries in local_addr_list:
ifindex:36 addr:fe80::40:43ff:fe80:0 (eths0.209)
ifindex:37 addr:fe80::40:43ff:fe80:0 (eths0.210)
the route table:
local fe80::40:43ff:fe80:0 dev eths0.201
local fe80::40:43ff:fe80:0 dev eths0.210
3.asoc not found for src:[fe80::40:43ff:fe80:0]:37381 dst:[:1]:53335
::1->fe80::40:43ff:fe80:0 HEARTBEAT
fe80::40:43ff:fe80:0->::1 ABORT
Signed-off-by: Chen Shen <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
The list_for_each_entry() iterator, "pos" in this code, can never be
NULL so the warning will never be printed.
Signed-off-by: Harshvardhan Jha <[email protected]>
Signed-off-by: Steffen Klassert <[email protected]>
|
|
This patch is to introduce last_rtx_chunks into sctp_transport to detect
if there's any packet retransmission/loss happened by checking against
asoc's rtx_data_chunks in sctp_transport_pl_send().
If there is, namely, transport->last_rtx_chunks != asoc->rtx_data_chunks,
the pmtu probe will be sent out. Otherwise, increment the pl.raise_count
and return when it's in Search Complete state.
With this patch, if in Search Complete state, which is a long period, it
doesn't need to keep probing the current pmtu unless there's data packet
loss. This will save quite some traffic.
v1->v2:
- add the missing Fixes tag.
Fixes: 0dac127c0557 ("sctp: do black hole detection in search complete state")
Signed-off-by: Xin Long <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
This patch does 3 things:
- make sctp_transport_pl_send() and sctp_transport_pl_recv()
return bool type to decide if more probe is needed to send.
- pr_debug() only when probe is really needed to send.
- count pl.raise_count in sctp_transport_pl_send() instead of
sctp_transport_pl_recv(), and it's only incremented for the
1st probe for the same size.
These are preparations for the next patch to make probes happen
only when there's packet loss in Search Complete state.
Signed-off-by: Xin Long <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|