| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Before commit f10d3d9df49d ("nexthop: Make nexthop bucket dump more
efficient"), rtm_dump_nexthop_bucket_nh() returned a non-zero return
code for each resilient nexthop group whose buckets it dumped,
regardless if it encountered an error or not.
This meant that the sentinel ('dd->ctx->nh.idx') used by the function
that walked the different nexthops could not be used as a sentinel for
the bucket dump, as otherwise buckets from the same group would be
dumped over and over again.
This was dealt with by adding another sentinel ('dd->ctx->done_nh_idx')
that was incremented by rtm_dump_nexthop_bucket_nh() after successfully
dumping all the buckets from a given group.
After the previously mentioned commit this sentinel is no longer
necessary since the function no longer returns a non-zero return code
when successfully dumping all the buckets from a given group.
Remove this sentinel and simplify the code.
Signed-off-by: Ido Schimmel <[email protected]>
Reviewed-by: Petr Machata <[email protected]>
Reviewed-by: David Ahern <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The NEXT-C-SID mechanism described in [1] offers the possibility of
encoding several SRv6 segments within a single 128 bit SID address. Such
a SID address is called a Compressed SID (C-SID) container. In this way,
the length of the SID List can be drastically reduced.
A SID instantiated with the NEXT-C-SID flavor considers an IPv6 address
logically structured in three main blocks: i) Locator-Block; ii)
Locator-Node Function; iii) Argument.
C-SID container
+------------------------------------------------------------------+
| Locator-Block |Loc-Node| Argument |
| |Function| |
+------------------------------------------------------------------+
<--------- B -----------> <- NF -> <------------- A --------------->
(i) The Locator-Block can be any IPv6 prefix available to the provider;
(ii) The Locator-Node Function represents the node and the function to
be triggered when a packet is received on the node;
(iii) The Argument carries the remaining C-SIDs in the current C-SID
container.
This patch leverages the NEXT-C-SID mechanism previously introduced in the
Linux SRv6 subsystem [2] to support SID compression capabilities in the
SRv6 End.X behavior [3].
An SRv6 End.X behavior with NEXT-C-SID flavor works as an End.X behavior
but it is capable of processing the compressed SID List encoded in C-SID
containers.
An SRv6 End.X behavior with NEXT-C-SID flavor can be configured to support
user-provided Locator-Block and Locator-Node Function lengths. In this
implementation, such lengths must be evenly divisible by 8 (i.e. must be
byte-aligned), otherwise the kernel informs the user about invalid
values with a meaningful error code and message through netlink_ext_ack.
If Locator-Block and/or Locator-Node Function lengths are not provided
by the user during configuration of an SRv6 End.X behavior instance with
NEXT-C-SID flavor, the kernel will choose their default values i.e.,
32-bit Locator-Block and 16-bit Locator-Node Function.
[1] - https://datatracker.ietf.org/doc/html/draft-ietf-spring-srv6-srh-compression
[2] - https://lore.kernel.org/all/[email protected]/
[3] - https://datatracker.ietf.org/doc/html/rfc8986#name-endx-l3-cross-connect
Signed-off-by: Andrea Mayer <[email protected]>
Reviewed-by: Hangbin Liu <[email protected]>
Reviewed-by: David Ahern <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Move from register_net_sysctl to register_net_sysctl_sz for all the
networking related files. Do this while making sure to mirror the NULL
assignments with a table_size of zero for the unprivileged users.
We need to move to the new function in preparation for when we change
SIZE_MAX to ARRAY_SIZE() in the register_net_sysctl macro. Failing to do
so would erroneously allow ARRAY_SIZE() to be called on a pointer. We
hold off the SIZE_MAX to ARRAY_SIZE change until we have migrated all
the relevant net sysctl registering functions to register_net_sysctl_sz
in subsequent commits.
An additional size function was added to the following files in order to
calculate the size of an array that is defined in another file:
include/net/ipv6.h
net/ipv6/icmp.c
net/ipv6/route.c
net/ipv6/sysctl_net_ipv6.c
Signed-off-by: Joel Granados <[email protected]>
Signed-off-by: Luis Chamberlain <[email protected]>
|
|
Move from register_net_sysctl to register_net_sysctl_sz for all the
netfilter related files. Do this while making sure to mirror the NULL
assignments with a table_size of zero for the unprivileged users.
We need to move to the new function in preparation for when we change
SIZE_MAX to ARRAY_SIZE() in the register_net_sysctl macro. Failing to do
so would erroneously allow ARRAY_SIZE() to be called on a pointer. We
hold off the SIZE_MAX to ARRAY_SIZE change until we have migrated all
the relevant net sysctl registering functions to register_net_sysctl_sz
in subsequent commits.
Acked-by: Julian Anastasov <[email protected]>
Signed-off-by: Joel Granados <[email protected]>
Signed-off-by: Luis Chamberlain <[email protected]>
|
|
Move from register_net_sysctl to register_net_sysctl_sz and pass the
ARRAY_SIZE of the ctl_table array that was used to create the table
variable. We need to move to the new function in preparation for when we
change SIZE_MAX to ARRAY_SIZE() in the register_net_sysctl macro.
Failing to do so would erroneously allow ARRAY_SIZE() to be called on a
pointer. We hold off the SIZE_MAX to ARRAY_SIZE change until we have
migrated all the relevant net sysctl registering functions to
register_net_sysctl_sz in subsequent commits.
Signed-off-by: Joel Granados <[email protected]>
Signed-off-by: Luis Chamberlain <[email protected]>
|
|
This commit adds size to the register_net_sysctl indirection function to
facilitate the removal of the sentinel elements (last empty markers)
from the ctl_table arrays. Though we don't actually remove any sentinels
in this commit, register_net_sysctl* now has the capability of
forwarding table_size for when that happens.
We create a new function register_net_sysctl_sz with an extra size
argument. A macro replaces the existing register_net_sysctl. The size in
the macro is SIZE_MAX instead of ARRAY_SIZE to avoid compilation errors
while we systematically migrate to register_net_sysctl_sz. Will change
to ARRAY_SIZE in subsequent commits.
Care is taken to add table_size to the stopping criteria in such a way
that when we remove the empty sentinel element, it will continue
stopping in the last element of the ctl_table array.
Signed-off-by: Joel Granados <[email protected]>
Suggested-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Luis Chamberlain <[email protected]>
|
|
This commit adds table_size to register_sysctl in preparation for the
removal of the sentinel elements in the ctl_table arrays (last empty
markers). And though we do *not* remove any sentinels in this commit, we
set things up by either passing the table_size explicitly or using
ARRAY_SIZE on the ctl_table arrays.
We replace the register_syctl function with a macro that will add the
ARRAY_SIZE to the new register_sysctl_sz function. In this way the
callers that are already using an array of ctl_table structs do not
change. For the callers that pass a ctl_table array pointer, we pass the
table_size to register_sysctl_sz instead of the macro.
Signed-off-by: Joel Granados <[email protected]>
Suggested-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Luis Chamberlain <[email protected]>
|
|
We make these changes in order to prepare __register_sysctl_table and
its callers for when we remove the sentinel element (empty element at
the end of ctl_table arrays). We don't actually remove any sentinels in
this commit, but we *do* make sure to use ARRAY_SIZE so the table_size
is available when the removal occurs.
We add a table_size argument to __register_sysctl_table and adjust
callers, all of which pass ctl_table pointers and need an explicit call
to ARRAY_SIZE. We implement a size calculation in register_net_sysctl in
order to forward the size of the array pointer received from the network
register calls.
The new table_size argument does not yet have any effect in the
init_header call which is still dependent on the sentinel's presence.
table_size *does* however drive the `kzalloc` allocation in
__register_sysctl_table with no adverse effects as the allocated memory
is either one element greater than the calculated ctl_table array (for
the calls in ipc_sysctl.c, mq_sysctl.c and ucount.c) or the exact size
of the calculated ctl_table array (for the call from sysctl_net.c and
register_sysctl). This approach will allows us to "just" remove the
sentinel without further changes to __register_sysctl_table as
table_size will represent the exact size for all the callers at that
point.
Signed-off-by: Joel Granados <[email protected]>
Signed-off-by: Luis Chamberlain <[email protected]>
|
|
Do not allow to insert elements from datapath to objects maps.
Fixes: 8aeff920dcc9 ("netfilter: nf_tables: add stateful object reference to set elements")
Signed-off-by: Pablo Neira Ayuso <[email protected]>
Signed-off-by: Florian Westphal <[email protected]>
|
|
Use maybe_get_net() since GC workqueue might race with netns exit path.
Fixes: 5f68718b34a5 ("netfilter: nf_tables: GC transaction API to avoid race with control plane")
Signed-off-by: Pablo Neira Ayuso <[email protected]>
Signed-off-by: Florian Westphal <[email protected]>
|
|
exit path
Netlink event path is missing a synchronization point with GC
transactions. Add GC sequence number update to netns release path and
netlink event path, any GC transaction losing race will be discarded.
Fixes: 5f68718b34a5 ("netfilter: nf_tables: GC transaction API to avoid race with control plane")
Signed-off-by: Pablo Neira Ayuso <[email protected]>
Signed-off-by: Florian Westphal <[email protected]>
|
|
When two threads run proc_do_sync_threshold() in parallel,
data races could happen between the two memcpy():
Thread-1 Thread-2
memcpy(val, valp, sizeof(val));
memcpy(valp, val, sizeof(val));
This race might mess up the (struct ctl_table *) table->data,
so we add a mutex lock to serialize them.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Link: https://lore.kernel.org/netdev/[email protected]/
Signed-off-by: Sishuai Gong <[email protected]>
Acked-by: Simon Horman <[email protected]>
Acked-by: Julian Anastasov <[email protected]>
Signed-off-by: Florian Westphal <[email protected]>
|
|
In SCTP protocol, it is using the same timer (T2 timer) for SHUTDOWN and
SHUTDOWN_ACK retransmission. However in sctp conntrack the default timeout
value for SCTP_CONNTRACK_SHUTDOWN_ACK_SENT state is 3 secs while it's 300
msecs for SCTP_CONNTRACK_SHUTDOWN_SEND/RECV state.
As Paolo Valerio noticed, this might cause unwanted expiration of the ct
entry. In my test, with 1s tc netem delay set on the NAT path, after the
SHUTDOWN is sent, the sctp ct entry enters SCTP_CONNTRACK_SHUTDOWN_SEND
state. However, due to 300ms (too short) delay, when the SHUTDOWN_ACK is
sent back from the peer, the sctp ct entry has expired and been deleted,
and then the SHUTDOWN_ACK has to be dropped.
Also, it is confusing these two sysctl options always show 0 due to all
timeout values using sec as unit:
net.netfilter.nf_conntrack_sctp_timeout_shutdown_recd = 0
net.netfilter.nf_conntrack_sctp_timeout_shutdown_sent = 0
This patch fixes it by also using 3 secs for sctp shutdown send and recv
state in sctp conntrack, which is also RTO.initial value in SCTP protocol.
Note that the very short time value for SCTP_CONNTRACK_SHUTDOWN_SEND/RECV
was probably used for a rare scenario where SHUTDOWN is sent on 1st path
but SHUTDOWN_ACK is replied on 2nd path, then a new connection started
immediately on 1st path. So this patch also moves from SHUTDOWN_SEND/RECV
to CLOSE when receiving INIT in the ORIGINAL direction.
Fixes: 9fb9cbb1082d ("[NETFILTER]: Add nf_conntrack subsystem.")
Reported-by: Paolo Valerio <[email protected]>
Signed-off-by: Xin Long <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Signed-off-by: Florian Westphal <[email protected]>
|
|
nftables selftests fail:
run-tests.sh testcases/sets/0044interval_overlap_0
Expected: 0-2 . 0-3, got:
W: [FAILED] ./testcases/sets/0044interval_overlap_0: got 1
Insertion must ignore duplicate but expired entries.
Moreover, there is a strange asymmetry in nft_pipapo_activate:
It refetches the current element, whereas the other ->activate callbacks
(bitmap, hash, rhash, rbtree) use elem->priv.
Same for .remove: other set implementations take elem->priv,
nft_pipapo_remove fetches elem->priv, then does a relookup,
remove this.
I suspect this was the reason for the change that prompted the
removal of the expired check in pipapo_get() in the first place,
but skipping exired elements there makes no sense to me, this helper
is used for normal get requests, insertions (duplicate check)
and deactivate callback.
In first two cases expired elements must be skipped.
For ->deactivate(), this gets called for DELSETELEM, so it
seems to me that expired elements should be skipped as well, i.e.
delete request should fail with -ENOENT error.
Fixes: 24138933b97b ("netfilter: nf_tables: don't skip expired elements during walk")
Signed-off-by: Florian Westphal <[email protected]>
|
|
When flushing, individual set elements are disabled in the next
generation via the ->flush callback.
Catchall elements are not disabled. This is incorrect and may lead to
double-deactivations of catchall elements which then results in memory
leaks:
WARNING: CPU: 1 PID: 3300 at include/net/netfilter/nf_tables.h:1172 nft_map_deactivate+0x549/0x730
CPU: 1 PID: 3300 Comm: nft Not tainted 6.5.0-rc5+ #60
RIP: 0010:nft_map_deactivate+0x549/0x730
[..]
? nft_map_deactivate+0x549/0x730
nf_tables_delset+0xb66/0xeb0
(the warn is due to nft_use_dec() detecting underflow).
Fixes: aaa31047a6d2 ("netfilter: nftables: add catch-all set element support")
Reported-by: lonial con <[email protected]>
Signed-off-by: Florian Westphal <[email protected]>
|
|
Jakub Kicinski says:
We've got some new kdoc warnings here:
net/netfilter/nft_set_pipapo.c:1557: warning: Function parameter or member '_set' not described in 'pipapo_gc'
net/netfilter/nft_set_pipapo.c:1557: warning: Excess function parameter 'set' description in 'pipapo_gc'
include/net/netfilter/nf_tables.h:577: warning: Function parameter or member 'dead' not described in 'nft_set'
Fixes: 5f68718b34a5 ("netfilter: nf_tables: GC transaction API to avoid race with control plane")
Fixes: f6c383b8c31a ("netfilter: nf_tables: adapt set backend to use GC transaction API")
Reported-by: Jakub Kicinski <[email protected]>
Closes: https://lore.kernel.org/netdev/[email protected]/
Signed-off-by: Florian Westphal <[email protected]>
|
|
->abort invocation may cause splat on debug kernels:
WARNING: suspicious RCU usage
net/netfilter/nft_set_pipapo.c:1697 suspicious rcu_dereference_check() usage!
[..]
rcu_scheduler_active = 2, debug_locks = 1
1 lock held by nft/133554: [..] (nft_net->commit_mutex){+.+.}-{3:3}, at: nf_tables_valid_genid
[..]
lockdep_rcu_suspicious+0x1ad/0x260
nft_pipapo_abort+0x145/0x180
__nf_tables_abort+0x5359/0x63d0
nf_tables_abort+0x24/0x40
nfnetlink_rcv+0x1a0a/0x22c0
netlink_unicast+0x73c/0x900
netlink_sendmsg+0x7f0/0xc20
____sys_sendmsg+0x48d/0x760
Transaction mutex is held, so parallel updates are not possible.
Switch to _protected and check mutex is held for lockdep enabled builds.
Fixes: 212ed75dc5fb ("netfilter: nf_tables: integrate pipapo into commit protocol")
Signed-off-by: Florian Westphal <[email protected]>
|
|
We had a number of bugs in the past because developers forgot
to fully test dumps, which pass NULL as info to .prepare_data.
.prepare_data implementations would try to access info->extack
leading to a null-deref.
Now that dumps and notifications can access struct genl_info
we can pass it in, and remove the info null checks.
Reviewed-by: Vladimir Oltean <[email protected]>
Tested-by: Vladimir Oltean <[email protected]> # pause
Reviewed-by: Jiri Pirko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Pass struct genl_info directly instead of its members.
Reviewed-by: Jiri Pirko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Use the just added APIs to make the code simpler.
Reviewed-by: Jiri Pirko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Having family in struct genl_info is quite useful. It cuts
down the number of arguments which need to be passed to
helpers which already take struct genl_info.
Reviewed-by: Jiri Pirko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Since dumps carry struct genl_info now, use the attrs pointer
from genl_info and remove the one in struct genl_dumpit_info.
Reviewed-by: Johannes Berg <[email protected]>
Reviewed-by: Miquel Raynal <[email protected]>
Reviewed-by: Jiri Pirko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Netlink GET implementations must currently juggle struct genl_info
and struct netlink_callback, depending on whether they were called
from doit or dumpit.
Add genl_info to the dump state and populate the fields.
This way implementations can simply pass struct genl_info around.
Reviewed-by: Jiri Pirko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Only three families use info->userhdr today and going forward
we discourage using fixed headers in new families.
So having the pointer to user header in struct genl_info
is an overkill. Compute the header pointer at runtime.
Reviewed-by: Johannes Berg <[email protected]>
Reviewed-by: Jiri Pirko <[email protected]>
Reviewed-by: Aaron Conole <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
struct netlink_callback has a const nlh pointer, make the
pointer in struct genl_info const as well, to make copying
between the two easier.
Reviewed-by: Jiri Pirko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Add helpers which take/release the genl mutex based
on family->parallel_ops. Remove the separation between
handling of ops in locked and parallel families.
Future patches would make the duplicated code grow even more.
Reviewed-by: Johannes Berg <[email protected]>
Reviewed-by: Jiri Pirko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
In the real workload, I encountered an issue which could cause the RTO
timer to retransmit the skb per 1ms with linear option enabled. The amount
of lost-retransmitted skbs can go up to 1000+ instantly.
The root cause is that if the icsk_rto happens to be zero in the 6th round
(which is the TCP_THIN_LINEAR_RETRIES value), then it will always be zero
due to the changed calculation method in tcp_retransmit_timer() as follows:
icsk->icsk_rto = min(icsk->icsk_rto << 1, TCP_RTO_MAX);
Above line could be converted to
icsk->icsk_rto = min(0 << 1, TCP_RTO_MAX) = 0
Therefore, the timer expires so quickly without any doubt.
I read through the RFC 6298 and found that the RTO value can be rounded
up to a certain value, in Linux, say TCP_RTO_MIN as default, which is
regarded as the lower bound in this patch as suggested by Eric.
Fixes: 36e31b0af587 ("net: TCP thin linear timeouts")
Suggested-by: Eric Dumazet <[email protected]>
Signed-off-by: Jason Xing <[email protected]>
Reviewed-by: Eric Dumazet <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
svc_tcp_sendmsg used to factor in the xdr->page_base when sending pages,
but commit 5df5dd03a8f7 ("sunrpc: Use sendmsg(MSG_SPLICE_PAGES) rather
then sendpage") dropped that part of the handling. Fix it by setting
the bv_offset of the first bvec.
Fixes: 5df5dd03a8f7 ("sunrpc: Use sendmsg(MSG_SPLICE_PAGES) rather then sendpage")
Signed-off-by: Jeff Layton <[email protected]>
Signed-off-by: Chuck Lever <[email protected]>
|
|
Allow user to pass port index for health reporter dump request.
Re-generate the related code.
Signed-off-by: Jiri Pirko <[email protected]>
Acked-by: Jakub Kicinski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Introduce a possibility for devlink object to expose attributes it
supports for selection of dumped objects.
Use this by health reporter to indicate it supports port index based
selection of dump objects. Implement this selection mechanism in
devlink_nl_cmd_health_reporter_get_dump_one()
Example:
$ devlink health
pci/0000:08:00.0:
reporter fw
state healthy error 0 recover 0 auto_dump true
reporter fw_fatal
state healthy error 0 recover 0 grace_period 60000 auto_recover true auto_dump true
reporter vnic
state healthy error 0 recover 0
pci/0000:08:00.0/32768:
reporter vnic
state healthy error 0 recover 0
pci/0000:08:00.0/32769:
reporter vnic
state healthy error 0 recover 0
pci/0000:08:00.0/32770:
reporter vnic
state healthy error 0 recover 0
pci/0000:08:00.1:
reporter fw
state healthy error 0 recover 0 auto_dump true
reporter fw_fatal
state healthy error 0 recover 0 grace_period 60000 auto_recover true auto_dump true
reporter vnic
state healthy error 0 recover 0
pci/0000:08:00.1/98304:
reporter vnic
state healthy error 0 recover 0
pci/0000:08:00.1/98305:
reporter vnic
state healthy error 0 recover 0
pci/0000:08:00.1/98306:
reporter vnic
state healthy error 0 recover 0
$ devlink health show pci/0000:08:00.0
pci/0000:08:00.0:
reporter fw
state healthy error 0 recover 0 auto_dump true
reporter fw_fatal
state healthy error 0 recover 0 grace_period 60000 auto_recover true auto_dump true
reporter vnic
state healthy error 0 recover 0
pci/0000:08:00.0/32768:
reporter vnic
state healthy error 0 recover 0
pci/0000:08:00.0/32769:
reporter vnic
state healthy error 0 recover 0
pci/0000:08:00.0/32770:
reporter vnic
state healthy error 0 recover 0
$ devlink health show pci/0000:08:00.0/32768
pci/0000:08:00.0/32768:
reporter vnic
state healthy error 0 recover 0
The last command is possible because of this patch.
Signed-off-by: Jiri Pirko <[email protected]>
Acked-by: Jakub Kicinski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
instance attributes
Extend per-instance dump command definitions to accept instance
attributes. Allow parsing of devlink handle attributes so they could
be used for instance selection.
Re-generate the related code.
Signed-off-by: Jiri Pirko <[email protected]>
Acked-by: Jakub Kicinski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
For SFs, one devlink instance per SF is created. There might be
thousands of these on a single host. When a user needs to know port
handle for specific SF, he needs to dump all devlink ports on the host
which does not scale good.
Allow user to pass devlink handle attributes alongside the dump command
and dump only objects which are under selected devlink instance.
Example:
$ devlink port show
auxiliary/mlx5_core.eth.0/65535: type eth netdev eth2 flavour physical port 0 splittable false
auxiliary/mlx5_core.eth.1/131071: type eth netdev eth3 flavour physical port 1 splittable false
$ devlink port show auxiliary/mlx5_core.eth.0
auxiliary/mlx5_core.eth.0/65535: type eth netdev eth2 flavour physical port 0 splittable false
$ devlink port show auxiliary/mlx5_core.eth.1
auxiliary/mlx5_core.eth.1/131071: type eth netdev eth3 flavour physical port 1 splittable false
Signed-off-by: Jiri Pirko <[email protected]>
Acked-by: Jakub Kicinski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
As the commands are already defined in split ops, remove them
from small ops.
Signed-off-by: Jiri Pirko <[email protected]>
Acked-by: Jakub Kicinski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Remove the duplicate temporary netlink callback prototype as the
generated ones are already in place.
Signed-off-by: Jiri Pirko <[email protected]>
Acked-by: Jakub Kicinski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Add the definitions for the commands that do per-instance dump
and re-generate the related code.
Signed-off-by: Jiri Pirko <[email protected]>
Acked-by: Jakub Kicinski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
In order to easily set NLM_F_DUMP_FILTERED for partial dumps, pass the
flags as an arg of dump_one() callback. Currently, it is always
NLM_F_MULTI.
Signed-off-by: Jiri Pirko <[email protected]>
Acked-by: Jakub Kicinski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Introduce dumpit callbacks for generated split ops. Have them
as a thin wrapper around iteration function and allow to pass dump_one()
function pointer directly without need to store in devlink_cmd structs.
Note that the function prototypes are temporary until the generated ones
will replace them in a follow-up patch.
Signed-off-by: Jiri Pirko <[email protected]>
Acked-by: Jakub Kicinski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Rename netlink doit callback functions for the commands that do
implement per-instance dump to match the generated names that are going
to be introduce in the follow-up patch.
Note that the function prototypes are temporary until the generated ones
will replace them in a follow-up patch.
Signed-off-by: Jiri Pirko <[email protected]>
Acked-by: Jakub Kicinski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Define port handling helpers what don't rely on internal_flags.
Have __devlink_nl_pre_doit() to accept the flags as a function arg and
make devlink_nl_pre_doit() a wrapper helper function calling it.
Introduce new helpers devlink_nl_pre_doit_port() and
devlink_nl_pre_doit_port_optional() to be used by split ops in follow-up
patch.
Note that the function prototypes are temporary until the generated ones
will replace them in a follow-up patch.
Signed-off-by: Jiri Pirko <[email protected]>
Acked-by: Jakub Kicinski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
No need to give the rate any special treatment in netlink attributes
parsing, as unlike for ports, there is only a couple of commands
benefiting from that.
Remove DEVLINK_NL_FLAG_NEED_RATE*, make pre_doit() callback simpler
by moving the rate attributes parsing to rate_*_doit() ops.
Signed-off-by: Jiri Pirko <[email protected]>
Acked-by: Jakub Kicinski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
No need to give the linecards any special treatment in netlink attribute
parsing, as unlike for ports, there is only a couple of commands
benefiting from that.
Remove DEVLINK_NL_FLAG_NEED_LINECARD, make pre_doit() callback simpler
by moving the linecard attribute parsing to linecard_[gs]et_doit() ops.
Signed-off-by: Jiri Pirko <[email protected]>
Acked-by: Jakub Kicinski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
This code was only used in the past for the sysfs interface. But since
this was replace with netlink, it was never executed. The function pointer
was only checked to figure out whether the limit 255 (B.A.T.M.A.N. IV) or
2**32-1 (B.A.T.M.A.N. V) should be used as limit.
So instead of keeping the function pointer, just store the limits directly
in struct batadv_algo_gw_ops.
Signed-off-by: Sven Eckelmann <[email protected]>
Signed-off-by: Simon Wunderlich <[email protected]>
|
|
The batadv_netlink_notify_*() functions are not used by any other source
file. Just keep them local to netlink.c to get informed by the compiler
when they are not used anymore.
Signed-off-by: Sven Eckelmann <[email protected]>
Signed-off-by: Simon Wunderlich <[email protected]>
|
|
This function is no longer used since the sysfs support was removed from
batman-adv.
Signed-off-by: Sven Eckelmann <[email protected]>
Signed-off-by: Simon Wunderlich <[email protected]>
|
|
This reverts commit 718cb09aaa6fa78cc8124e9517efbc6c92665384.
The commit triggers multiple syzbot issues, probably due to possibility of
manually creating VLAN 0 on netdevice which will cause the code to delete
it since it can't distinguish such VLAN from implicit VLAN 0 automatically
created for devices with NETIF_F_HW_VLAN_CTAG_FILTER feature.
Reported-by: [email protected]
Closes: https://lore.kernel.org/all/[email protected]/
Reported-by: [email protected]
Closes: https://lore.kernel.org/all/[email protected]/
Reported-by: [email protected]
Closes: https://lore.kernel.org/all/[email protected]/
Fixes: 718cb09aaa6f ("vlan: Fix VLAN 0 memory leak")
Signed-off-by: Vlad Buslov <[email protected]>
Reviewed-by: Ido Schimmel <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Use drop reasons from include/net/dropreason-core.h when a reasonable
candidate exists.
Acked-by: Aaron Conole <[email protected]>
Signed-off-by: Adrian Moreno <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
By using an independent drop reason it makes it easy to distinguish
between QoS-triggered or flow-triggered drop.
Acked-by: Aaron Conole <[email protected]>
Signed-off-by: Adrian Moreno <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
From: Eric Garver <[email protected]>
This adds an explicit drop action. This is used by OVS to drop packets
for which it cannot determine what to do. An explicit action in the
kernel allows passing the reason _why_ the packet is being dropped or
zero to indicate no particular error happened (i.e: OVS intentionally
dropped the packet).
Since the error codes coming from userspace mean nothing for the kernel,
we squash all of them into only two drop reasons:
- OVS_DROP_EXPLICIT_WITH_ERROR to indicate a non-zero value was passed
- OVS_DROP_EXPLICIT to indicate a zero value was passed (no error)
e.g. trace all OVS dropped skbs
# perf trace -e skb:kfree_skb --filter="reason >= 0x30000"
[..]
106.023 ping/2465 skb:kfree_skb(skbaddr: 0xffffa0e8765f2000, \
location:0xffffffffc0d9b462, protocol: 2048, reason: 196611)
reason: 196611 --> 0x30003 (OVS_DROP_EXPLICIT)
Also, this patch allows ovs-dpctl.py to add explicit drop actions as:
"drop" -> implicit empty-action drop
"drop(0)" -> explicit non-error action drop
"drop(42)" -> explicit error action drop
Signed-off-by: Eric Garver <[email protected]>
Co-developed-by: Adrian Moreno <[email protected]>
Signed-off-by: Adrian Moreno <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Add a drop reason for packets that are dropped because an action
returns a non-zero error code.
Acked-by: Aaron Conole <[email protected]>
Signed-off-by: Adrian Moreno <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Create a new drop reason subsystem for openvswitch and add the first
drop reason to represent last-action drops.
Last-action drops happen when a flow has an empty action list or there
is no action that consumes the packet (output, userspace, recirc, etc).
It is the most common way in which OVS drops packets.
Implementation-wise, most of these skb-consuming actions already call
"consume_skb" internally and return directly from within the
do_execute_actions() loop so with minimal changes we can assume that
any skb that exits the loop normally is a packet drop.
Signed-off-by: Adrian Moreno <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|