aboutsummaryrefslogtreecommitdiff
path: root/net
AgeCommit message (Collapse)AuthorFilesLines
2013-02-27mac80211: convert to idr_alloc()Tejun Heo2-16/+4
Convert to the much saner new idr interface. Signed-off-by: Tejun Heo <[email protected]> Acked-by: Johannes Berg <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2013-02-27net/9p: convert to idr_alloc()Tejun Heo1-11/+6
Convert to the much saner new idr interface. Signed-off-by: Tejun Heo <[email protected]> Cc: Eric Van Hensbergen <[email protected]> Cc: Ron Minnich <[email protected]> Cc: Latchesar Ionkov <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2013-02-27net/sctp: Validate parameter size for SCTP_GET_ASSOC_STATSGuenter Roeck1-3/+3
Building sctp may fail with: In function ‘copy_from_user’, inlined from ‘sctp_getsockopt_assoc_stats’ at net/sctp/socket.c:5656:20: arch/x86/include/asm/uaccess_32.h:211:26: error: call to ‘copy_from_user_overflow’ declared with attribute error: copy_from_user() buffer size is not provably correct if built with W=1 due to a missing parameter size validation before the call to copy_from_user. Signed-off-by: Guenter Roeck <[email protected]> Acked-by: Vlad Yasevich <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2013-02-27irda: small read beyond end of array in debug codeDan Carpenter1-2/+5
charset comes from skb->data. It's a number in the 0-255 range. If we have debugging turned on then this could cause a read beyond the end of the array. Signed-off-by: Dan Carpenter <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2013-02-27nl80211: remove channel width and extended capa advertisingJohannes Berg2-23/+1
This is another case of data increasing the size of the wiphy information significantly with a new feature, for now remove this as well. Signed-off-by: Johannes Berg <[email protected]>
2013-02-26Merge branch 'for-linus' of ↵Linus Torvalds10-29/+28
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs pile (part one) from Al Viro: "Assorted stuff - cleaning namei.c up a bit, fixing ->d_name/->d_parent locking violations, etc. The most visible changes here are death of FS_REVAL_DOT (replaced with "has ->d_weak_revalidate()") and a new helper getting from struct file to inode. Some bits of preparation to xattr method interface changes. Misc patches by various people sent this cycle *and* ocfs2 fixes from several cycles ago that should've been upstream right then. PS: the next vfs pile will be xattr stuff." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (46 commits) saner proc_get_inode() calling conventions proc: avoid extra pde_put() in proc_fill_super() fs: change return values from -EACCES to -EPERM fs/exec.c: make bprm_mm_init() static ocfs2/dlm: use GFP_ATOMIC inside a spin_lock ocfs2: fix possible use-after-free with AIO ocfs2: Fix oops in ocfs2_fast_symlink_readpage() code path get_empty_filp()/alloc_file() leave both ->f_pos and ->f_version zero target: writev() on single-element vector is pointless export kernel_write(), convert open-coded instances fs: encode_fh: return FILEID_INVALID if invalid fid_type kill f_vfsmnt vfs: kill FS_REVAL_DOT by adding a d_weak_revalidate dentry op nfsd: handle vfs_getattr errors in acl protocol switch vfs_getattr() to struct path default SET_PERSONALITY() in linux/elf.h ceph: prepopulate inodes only when request is aborted d_hash_and_lookup(): export, switch open-coded instances 9p: switch v9fs_set_create_acl() to inode+fid, do it before d_instantiate() 9p: split dropping the acls from v9fs_set_create_acl() ...
2013-02-26libceph: add support for HASHPSPOOL pool flagSage Weil1-13/+26
The legacy behavior adds the pgid seed and pool together as the input for CRUSH. That is problematic because each pool's PGs end up mapping to the same OSDs: 1.5 == 2.4 == 3.3 == ... Instead, if the HASHPSPOOL flag is set, we has the ps and pool together and feed that into CRUSH. This ensures that two adjacent pools will map to an independent pseudorandom set of OSDs. Advertise our support for this via a protocol feature flag. Signed-off-by: Sage Weil <[email protected]> Reviewed-by: Alex Elder <[email protected]>
2013-02-26libceph: update osd request/reply encodingSage Weil2-77/+174
Use the new version of the encoding for osd requests and replies. In the process, update the way we are tracking request ops and reply lengths and results in the struct ceph_osd_request. Update the rbd and fs/ceph users appropriately. The main changes are: - we keep pointers into the request memory for fields we need to update each time the request is sent out over the wire - we keep information about the result in an array in the request struct where the users can easily get at it. Signed-off-by: Sage Weil <[email protected]> Reviewed-by: Alex Elder <[email protected]>
2013-02-26libceph: calculate placement based on the internal data typesSage Weil2-17/+12
Instead of using the old ceph_object_layout struct, update our internal ceph_calc_object_layout method to use the ceph_pg type. This allows us to pass the full 32-bit precision of the pgid.seed to the callers. It also allows some callers to avoid reaching into the request structures for the struct ceph_object_layout fields. Signed-off-by: Sage Weil <[email protected]> Reviewed-by: Alex Elder <[email protected]>
2013-02-26ceph: update support for PGID64, PGPOOL3, OSDENC protocol featuresSage Weil3-83/+91
Support (and require) the PGID64, PGPOOL3, and OSDENC protocol features. These have been present in ceph.git since v0.42, Feb 2012. Require these features to simplify support; nobody is running older userspace. Note that the new request and reply encoding is still not in place, so the new code is not yet functional. Signed-off-by: Sage Weil <[email protected]> Reviewed-by: Alex Elder <[email protected]>
2013-02-26libceph: decode into cpu-native ceph_pg typeSage Weil3-42/+50
Always decode data into our cpu-native ceph_pg type that has the correct field widths. Limit any remaining uses of ceph_pg_v1 to dealing with the legacy protocol. Signed-off-by: Sage Weil <[email protected]> Reviewed-by: Alex Elder <[email protected]>
2013-02-26libceph: rename ceph_pg -> ceph_pg_v1Sage Weil2-10/+10
Rename the old version this type to distinguish it from the new version. Signed-off-by: Sage Weil <[email protected]> Reviewed-by: Alex Elder <[email protected]>
2013-02-26Merge branch 'master' of git://1984.lsi.us.es/nfDavid S. Miller1-1/+2
Pablo Neira Ayuso says: ==================== The following patchset contains two bugfixes for netfilter/ipset via Jozsef Kadlecsik, they are: * Fix timeout corruption if sets are resized, by Josh Hunt. * Fix bogus error report if the flag nomatch is set, from Jozsef. ==================== Signed-off-by: David S. Miller <[email protected]>
2013-02-26mac80211: Fix crash due to un-canceled work-itemsBen Greear1-0/+11
Some mlme work structs are not cancelled on disassociation nor interface deletion, which leads to them running after the memory has been freed There is not a clean way to cancel these in the disassociation logic because they must be canceled outside of the ifmgd->mtx lock, so just cancel them in mgd_stop logic that tears down the station. This fixes the crashes we see in 3.7.9+. The crash stack trace itself isn't so helpful, but this warning gives more useful info: WARNING: at /home/greearb/git/linux-3.7.dev.y/lib/debugobjects.c:261 debug_print_object+0x7c/0x8d() ODEBUG: free active (active state 0) object type: work_struct hint: ieee80211_sta_monitor_work+0x0/0x14 [mac80211] Modules linked in: [...] Pid: 14743, comm: iw Tainted: G C O 3.7.9+ #11 Call Trace: [<ffffffff81087ef8>] warn_slowpath_common+0x80/0x98 [<ffffffff81087fa4>] warn_slowpath_fmt+0x41/0x43 [<ffffffff812a2608>] debug_print_object+0x7c/0x8d [<ffffffff812a2bca>] debug_check_no_obj_freed+0x95/0x1c3 [<ffffffff8114cc69>] slab_free_hook+0x70/0x79 [<ffffffff8114ea3e>] kfree+0x62/0xb7 [<ffffffff8149f465>] netdev_release+0x39/0x3e [<ffffffff8136ad67>] device_release+0x52/0x8a [<ffffffff812937db>] kobject_release+0x121/0x158 [<ffffffff81293612>] kobject_put+0x4c/0x50 [<ffffffff8148f0d7>] netdev_run_todo+0x25c/0x27e Cc: [email protected] Signed-off-by: Ben Greear <[email protected]> Signed-off-by: Johannes Berg <[email protected]>
2013-02-26mac80211: stop timers before canceling work itemsBen Greear1-5/+9
Re-order the quiesce code so that timers are always stopped before work-items are flushed. This was not the problem I saw, but I think it may still be more correct. Signed-off-by: Ben Greear <[email protected]> Signed-off-by: Johannes Berg <[email protected]>
2013-02-26mac80211: fix monitor mode channel reportingFelix Fietkau1-3/+9
When not using channel contexts with only monitor mode interfaces being active, report local->monitor_chandef to userspace. Signed-off-by: Felix Fietkau <[email protected]> Signed-off-by: Johannes Berg <[email protected]>
2013-02-26mac80211: fix idle handling in monitor modeFelix Fietkau1-1/+1
When the driver does not want a monitor mode VIF, no channel context is allocated for it. This causes ieee80211_recalc_idle to put the hardware into idle mode if only a monitor mode is active, breaking injection. Fix this by checking local->monitors in addition to active channel contexts. Signed-off-by: Felix Fietkau <[email protected]> Signed-off-by: Johannes Berg <[email protected]>
2013-02-26mac80211: Ensure off-channel frames don't get queuedSeth Forshee1-25/+31
Commit 6c17b77b67587b9f9e3070fb89fe98cef3187131 (mac80211: Fix tx queue handling during scans) contains a bug that causes off-channel frames to get queued when they should be handed down to the driver for transmit. Prevent this from happening. Reported-by: Fabio Rossi <[email protected]> Signed-off-by: Seth Forshee <[email protected]> Signed-off-by: Johannes Berg <[email protected]>
2013-02-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds8-45/+75
Pull networking fixes from David Miller: 1) ping_err() ICMP error handler looks at wrong ICMP header, from Li Wei. 2) TCP socket hash function on ipv6 is too weak, from Eric Dumazet. 3) netif_set_xps_queue() forgets to drop mutex on errors, fix from Alexander Duyck. 4) sum_frag_mem_limit() can deadlock due to lack of BH disabling, fix from Eric Dumazet. 5) TCP SYN data is miscalculated in tcp_send_syn_data(), because the amount of TCP option space was not taken into account properly in this code path. Fix from yuchung Cheng. 6) MLX4 driver allocates device queues with the wrong size, from Kleber Sacilotto. 7) sock_diag can access past the end of the sock_diag_handlers[] array, from Mathias Krause. 8) vlan_set_encap_proto() makes incorrect assumptions about where skb->data points, rework the logic so that it works regardless of where skb->data happens to be. From Jesse Gross. 9) Fix gianfar build failure with NET_POLL enabled, from Paul Gortmaker. 10) Fix Ipv4 ID setting and checksum calculations in GRE driver, from Pravin B Shelar. 11) bgmac driver does: int i; for (i = 0; ...; ...) { ... for (i = 0; ...; ...) { effectively corrupting the outer loop index, use a seperate variable for the inner loops. From Rafał Miłecki. 12) Fix suspend bugs in smsc95xx driver, from Ming Lei. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (35 commits) usbnet: smsc95xx: rename FEATURE_AUTOSUSPEND usbnet: smsc95xx: fix broken runtime suspend usbnet: smsc95xx: fix suspend failure bgmac: fix indexing of 2nd level loops b43: Fix lockdep splat on module unload Revert "ip_gre: propogate target device GSO capability to the tunnel device" IP_GRE: Fix GRE_CSUM case. VXLAN: Use tunnel_ip_select_ident() for tunnel IP-Identification. IP_GRE: Fix IP-Identification. net/pasemi: Fix missing coding style vmxnet3: fix ethtool ring buffer size setting vmxnet3: make local function static bnx2x: remove dead code and make local funcs static gianfar: fix compile fail for NET_POLL=y due to struct packing vlan: adjust vlan_set_encap_proto() for its callers sock_diag: Simplify sock_diag_handlers[] handling in __sock_diag_rcv_msg sock_diag: Fix out-of-bounds access to sock_diag_handlers[] vxlan: remove depends on CONFIG_EXPERIMENTAL mlx4_en: fix allocation of CPU affinity reverse-map mlx4_en: fix allocation of device tx_cq ...
2013-02-26Merge tag 'rdma-for-linus' of ↵Linus Torvalds1-10/+10
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband Pull infiniband update from Roland Dreier: "Main batch of InfiniBand/RDMA changes for 3.9: - SRP error handling fixes from Bart Van Assche - Implementation of memory windows for mlx4 from Shani Michaeli - Lots of cxgb4 HW driver fixes from Vipul Pandya - Make iSER work for virtual functions, other fixes from Or Gerlitz - Fix for bug in qib HW driver from Mike Marciniszyn - IPoIB fixes from me, Itai Garbi, Shlomo Pongratz, Yan Burman - Various cleanups and warning fixes from Julia Lawall, Paul Bolle, Wei Yongjun" * tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (41 commits) IB/mlx4: Advertise MW support IB/mlx4: Support memory window binding mlx4: Implement memory windows allocation and deallocation mlx4_core: Enable memory windows in {INIT, QUERY}_HCA mlx4_core: Disable memory windows for virtual functions IPoIB: Free ipoib neigh on path record failure so path rec queries are retried IB/srp: Fail I/O requests if the transport is offline IB/srp: Avoid endless SCSI error handling loop IB/srp: Avoid sending a task management function needlessly IB/srp: Track connection state properly IB/mlx4: Remove redundant NULL check before kfree IB/mlx4: Fix compiler warning about uninitialized 'vlan' variable IB/mlx4: Convert is_xxx variables in build_mlx_header() to bool IB/iser: Enable iser when FMRs are not supported IB/iser: Avoid error prints on EAGAIN registration failures IB/iser: Use proper define for the commands per LUN value advertised to SCSI ML IB/uverbs: Implement memory windows support in uverbs IB/core: Add "type 2" memory windows support mlx4_core: Propagate MR deregistration failures to caller mlx4_core: Rename MPT-related functions to have mpt_ prefix ...
2013-02-26Merge branch 'next' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds1-4/+4
Pull slave-dmaengine updates from Vinod Koul: "This is fairly big pull by my standards as I had missed last merge window. So we have the support for device tree for slave-dmaengine, large updates to dw_dmac driver from Andy for reusing on different architectures. Along with this we have fixes on bunch of the drivers" Fix up trivial conflicts, usually due to #include line movement next to each other. * 'next' of git://git.infradead.org/users/vkoul/slave-dma: (111 commits) Revert "ARM: SPEAr13xx: Pass DW DMAC platform data from DT" ARM: dts: pl330: Add #dma-cells for generic dma binding support DMA: PL330: Register the DMA controller with the generic DMA helpers DMA: PL330: Add xlate function DMA: PL330: Add new pl330 filter for DT case. dma: tegra20-apb-dma: remove unnecessary assignment edma: do not waste memory for dma_mask dma: coh901318: set residue only if dma is in progress dma: coh901318: avoid unbalanced locking dmaengine.h: remove redundant else keyword dma: of-dma: protect list write operation by spin_lock dmaengine: ste_dma40: do not remove descriptors for cyclic transfers dma: of-dma.c: fix memory leakage dw_dmac: apply default dma_mask if needed dmaengine: ioat - fix spare sparse complain dmaengine: move drivers/of/dma.c -> drivers/dma/of-dma.c ioatdma: fix race between updating ioat->head and IOAT_COMPLETION_PENDING dw_dmac: add support for Lynxpoint DMA controllers dw_dmac: return proper residue value dw_dmac: fill individual length of descriptor ...
2013-02-26get_empty_filp()/alloc_file() leave both ->f_pos and ->f_version zeroAl Viro1-1/+0
Signed-off-by: Al Viro <[email protected]>
2013-02-25Merge branch 'for-linus' of ↵Linus Torvalds9-91/+170
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace Pull user namespace and namespace infrastructure changes from Eric W Biederman: "This set of changes starts with a few small enhnacements to the user namespace. reboot support, allowing more arbitrary mappings, and support for mounting devpts, ramfs, tmpfs, and mqueuefs as just the user namespace root. I do my best to document that if you care about limiting your unprivileged users that when you have the user namespace support enabled you will need to enable memory control groups. There is a minor bug fix to prevent overflowing the stack if someone creates way too many user namespaces. The bulk of the changes are a continuation of the kuid/kgid push down work through the filesystems. These changes make using uids and gids typesafe which ensures that these filesystems are safe to use when multiple user namespaces are in use. The filesystems converted for 3.9 are ceph, 9p, afs, ocfs2, gfs2, ncpfs, nfs, nfsd, and cifs. The changes for these filesystems were a little more involved so I split the changes into smaller hopefully obviously correct changes. XFS is the only filesystem that remains. I was hoping I could get that in this release so that user namespace support would be enabled with an allyesconfig or an allmodconfig but it looks like the xfs changes need another couple of days before it they are ready." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (93 commits) cifs: Enable building with user namespaces enabled. cifs: Convert struct cifs_ses to use a kuid_t and a kgid_t cifs: Convert struct cifs_sb_info to use kuids and kgids cifs: Modify struct smb_vol to use kuids and kgids cifs: Convert struct cifsFileInfo to use a kuid cifs: Convert struct cifs_fattr to use kuid and kgids cifs: Convert struct tcon_link to use a kuid. cifs: Modify struct cifs_unix_set_info_args to hold a kuid_t and a kgid_t cifs: Convert from a kuid before printing current_fsuid cifs: Use kuids and kgids SID to uid/gid mapping cifs: Pass GLOBAL_ROOT_UID and GLOBAL_ROOT_GID to keyring_alloc cifs: Use BUILD_BUG_ON to validate uids and gids are the same size cifs: Override unmappable incoming uids and gids nfsd: Enable building with user namespaces enabled. nfsd: Properly compare and initialize kuids and kgids nfsd: Store ex_anon_uid and ex_anon_gid as kuids and kgids nfsd: Modify nfsd4_cb_sec to use kuids and kgids nfsd: Handle kuids and kgids in the nfs4acl to posix_acl conversion nfsd: Convert nfsxdr to use kuids and kgids nfsd: Convert nfs3xdr to use kuids and kgids ...
2013-02-26mac80211: fix the problem of forwarding from DS to DS in MeshChun-Yeow Yeoh1-1/+16
Unicast frame with unknown forwarding information always trigger the path discovery assuming destination is always located inside the MBSS. This patch allows the forwarding to look for mesh gate if path discovery inside the MBSS has failed. Reported-by: Cedric Voncken <[email protected]> Signed-off-by: Chun-Yeow Yeoh <[email protected]> Signed-off-by: Johannes Berg <[email protected]>
2013-02-26nl80211: remove TCP WoWLAN informationJohannes Berg1-45/+0
Just like the radar information, the TCP WoWLAN capability data can increase the wiphy information and make it too big. Remove the TCP WoWLAN information; no driver supports it and new userspace tools will be required as well. Signed-off-by: Johannes Berg <[email protected]>
2013-02-26nl80211: remove radar informationJohannes Berg1-13/+3
The wiphy information is getting very close to being too much for a typical netlink dump message and adding the radar attributes to channels and interface combinations can push it over the limit, which means userspace gets no information whatsoever. Therefore, remove these again for now, no driver actually supports radar detection anyway and a modified userspace is required as well. We're working on a solution that will allow userspace to request splitting the information across multiple netlink messages, which will allow us to add this back. Cc: Simon Wunderlich <[email protected]> Signed-off-by: Johannes Berg <[email protected]>
2013-02-26mac80211: fix tim_lock lockingJohannes Berg1-2/+2
The ieee80211_beacon_add_tim() function might be called by drivers with BHs enabled, which causes a potential deadlock if TX happens at the same time and attempts to lock the tim_lock as well. Use spin_lock_bh to fix it. Signed-off-by: Johannes Berg <[email protected]>
2013-02-25libceph: use a do..while loop in con_work()Alex Elder1-41/+42
This just converts a manually-implemented loop into a do..while loop in con_work(). It also moves handling of EAGAIN inside the blocks where it's already been determined an error code was returned. Also update a few dout() calls near the affected code for consistency. Signed-off-by: Alex Elder <[email protected]> Reviewed-by: Josh Durgin <[email protected]>
2013-02-25libceph: use a flag to indicate a fault has occurredAlex Elder1-12/+12
This just rearranges the logic in con_work() a little bit so that a flag is used to indicate a fault has occurred. This allows both the fault and non-fault case to be handled the same way and avoids a couple of nearly consecutive gotos. Signed-off-by: Alex Elder <[email protected]> Reviewed-by: Josh Durgin <[email protected]>
2013-02-25libceph: separate non-locked fault handlingAlex Elder1-19/+23
An error occurring on a ceph connection is treated as a fault, causing the connection to be reset. The initial part of this fault handling has to be done while holding the connection mutex, but it must then be dropped for the last part. Separate the part of this fault handling that executes without the lock into its own function, con_fault_finish(). Move the call to this new function, as well as call that drops the connection mutex, into ceph_fault(). Rename that function con_fault() to reflect that it's only handling the connection part of the fault handling. The motivation for this was a warning from sparse about the locking being done here. Rearranging things this way keeps all the mutex manipulation within ceph_fault(), and this stops sparse from complaining. This partially resolves: http://tracker.ceph.com/issues/4184 Reported-by: Fengguang Wu <[email protected]> Signed-off-by: Alex Elder <[email protected]> Reviewed-by: Josh Durgin <[email protected]>
2013-02-25libceph: encapsulate connection backoffAlex Elder1-13/+24
Collect the code that tests for and implements a backoff delay for a ceph connection into a new function, ceph_backoff(). Make the debug output messages in that part of the code report things consistently by reporting a message in the socket closed case, and by making the one for PREOPEN state report the connection pointer like the rest. Signed-off-by: Alex Elder <[email protected]> Reviewed-by: Josh Durgin <[email protected]>
2013-02-25libceph: eliminate sparse warningsAlex Elder3-5/+6
Eliminate most of the problems in the libceph code that cause sparse to issue warnings. - Convert functions that are never referenced externally to have static scope. - Pass NULL rather than 0 for a pointer argument in one spot in ceph_monc_delete_snapid() This partially resolves: http://tracker.ceph.com/issues/4184 Reported-by: Fengguang Wu <[email protected]> Signed-off-by: Alex Elder <[email protected]> Reviewed-by: Josh Durgin <[email protected]>
2013-02-25libceph: define connection flag helpersAlex Elder1-29/+78
Define and use functions that encapsulate operations performed on a connection's flags. This resolves: http://tracker.ceph.com/issues/4234 Signed-off-by: Alex Elder <[email protected]> Reviewed-by: Josh Durgin <[email protected]>
2013-02-25Revert "ip_gre: propogate target device GSO capability to the tunnel device"Pravin B Shelar1-8/+2
This reverts commit eb6b9a8cad65e820b145547844b108117cece3a0. Above commit limits GSO capability of gre device to just TSO, but software GRE-GSO is capable of handling all GSO capabilities. This patch also fixes following panic which reverted commit introduced:- BUG: unable to handle kernel NULL pointer dereference at 00000000000000a2 IP: [<ffffffffa0680fd1>] ipgre_tunnel_bind_dev+0x161/0x1f0 [ip_gre] PGD 42bc19067 PUD 42bca9067 PMD 0 Oops: 0000 [#1] SMP Pid: 2636, comm: ip Tainted: GF 3.8.0+ #83 Dell Inc. PowerEdge R620/0KCKR5 RIP: 0010:[<ffffffffa0680fd1>] [<ffffffffa0680fd1>] ipgre_tunnel_bind_dev+0x161/0x1f0 [ip_gre] RSP: 0018:ffff88042bfcb708 EFLAGS: 00010246 RAX: 00000000000005b6 RBX: ffff88042d2fa000 RCX: 0000000000000044 RDX: 0000000000000018 RSI: 0000000000000078 RDI: 0000000000000060 RBP: ffff88042bfcb748 R08: 0000000000000018 R09: 000000000000000c R10: 0000000000000020 R11: 000000000101010a R12: ffff88042d2fa800 R13: 0000000000000000 R14: ffff88042d2fa800 R15: ffff88042cd7f650 FS: 00007fa784f55700(0000) GS:ffff88043fd20000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000000000a2 CR3: 000000042d8b9000 CR4: 00000000000407e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process ip (pid: 2636, threadinfo ffff88042bfca000, task ffff88042d142a80) Stack: 0000000100000000 002f000000000000 0a01010100000000 000000000b010101 ffff88042d2fa800 ffff88042d2fa000 ffff88042bfcb858 ffff88042f418c00 ffff88042bfcb798 ffffffffa068199a ffff88042bfcb798 ffff88042d2fa830 Call Trace: [<ffffffffa068199a>] ipgre_newlink+0xca/0x160 [ip_gre] [<ffffffff8143b692>] rtnl_newlink+0x532/0x5f0 [<ffffffff8143b2fc>] ? rtnl_newlink+0x19c/0x5f0 [<ffffffff81438978>] rtnetlink_rcv_msg+0x2c8/0x340 [<ffffffff814386b0>] ? rtnetlink_rcv+0x40/0x40 [<ffffffff814560f9>] netlink_rcv_skb+0xa9/0xd0 [<ffffffff81438695>] rtnetlink_rcv+0x25/0x40 [<ffffffff81455ddc>] netlink_unicast+0x1ac/0x230 [<ffffffff81456a45>] netlink_sendmsg+0x265/0x380 [<ffffffff814138c0>] sock_sendmsg+0xb0/0xe0 [<ffffffff8141141e>] ? move_addr_to_kernel+0x4e/0x90 [<ffffffff81420445>] ? verify_iovec+0x85/0xf0 [<ffffffff81414ffd>] __sys_sendmsg+0x3fd/0x420 [<ffffffff8114b701>] ? handle_mm_fault+0x251/0x3b0 [<ffffffff8114f39f>] ? vma_link+0xcf/0xe0 [<ffffffff81415239>] sys_sendmsg+0x49/0x90 [<ffffffff814ffd19>] system_call_fastpath+0x16/0x1b CC: Dmitry Kravkov <[email protected]> Signed-off-by: Pravin B Shelar <[email protected]> Acked-by: Dmitry Kravkov <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2013-02-25IP_GRE: Fix GRE_CSUM case.Pravin B Shelar1-4/+8
commit "ip_gre: allow CSUM capable devices to handle packets" aa0e51cdda005cd37e2, broke GRE_CSUM case. GRE_CSUM needs checksum computed for inner packet. Therefore csum-calculation can not be offloaded if tunnel device requires GRE_CSUM. Following patch fixes it by computing inner packet checksum for GRE_CSUM type, for all other type of GRE devices csum is offloaded. CC: Dmitry Kravkov <[email protected]> Signed-off-by: Pravin B Shelar <[email protected]> Acked-by: Dmitry Kravkov <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2013-02-25IP_GRE: Fix IP-Identification.Pravin B Shelar2-3/+6
GRE-GSO generates ip fragments with id 0,2,3,4... for every GSO packet, which is not correct. Following patch fixes it by setting ip-header id unique id of fragments are allowed. As Eric Dumazet suggested it is optimized by using inner ip-header whenever inner packet is ipv4. Signed-off-by: Pravin B Shelar <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2013-02-23net: change type of virtio_chan->p9_max_pagesZhang Yanfei1-1/+1
This member of struct virtio_chan is calculated from nr_free_buffer_pages so change its type to unsigned long in case of overflow. Signed-off-by: Zhang Yanfei <[email protected]> Cc: David Miller <[email protected]> Cc: Eric Van Hensbergen <[email protected]> Cc: Ron Minnich <[email protected]> Cc: Latchesar Ionkov <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2013-02-23net/core: apply pm_runtime_set_memalloc_noio on network devicesMing Lei1-0/+5
Deadlock might be caused by allocating memory with GFP_KERNEL in runtime_resume and runtime_suspend callback of network devices in iSCSI situation, so mark network devices and its ancestor as 'memalloc_noio' with the introduced pm_runtime_set_memalloc_noio(). Signed-off-by: Ming Lei <[email protected]> Cc: "David S. Miller" <[email protected]> Cc: Eric Dumazet <[email protected]> Cc: David Decotigny <[email protected]> Cc: Tom Herbert <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jens Axboe <[email protected]> Cc: Minchan Kim <[email protected]> Cc: Alan Stern <[email protected]> Cc: Oliver Neukum <[email protected]> Cc: Jiri Kosina <[email protected]> Cc: Mel Gorman <[email protected]> Cc: KAMEZAWA Hiroyuki <[email protected]> Cc: Michal Hocko <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: "Rafael J. Wysocki" <[email protected]> Cc: Greg KH <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2013-02-23sock_diag: Simplify sock_diag_handlers[] handling in __sock_diag_rcv_msgMathias Krause1-17/+7
The sock_diag_lock_handler() and sock_diag_unlock_handler() actually make the code less readable. Get rid of them and make the lock usage and access to sock_diag_handlers[] clear on the first sight. Signed-off-by: Mathias Krause <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2013-02-23sock_diag: Fix out-of-bounds access to sock_diag_handlers[]Mathias Krause1-0/+3
Userland can send a netlink message requesting SOCK_DIAG_BY_FAMILY with a family greater or equal then AF_MAX -- the array size of sock_diag_handlers[]. The current code does not test for this condition therefore is vulnerable to an out-of-bound access opening doors for a privilege escalation. Signed-off-by: Mathias Krause <[email protected]> Acked-by: Eric Dumazet <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2013-02-22fs: Preserve error code in get_empty_filp(), part 2Anatol Pomozov1-2/+2
Allocating a file structure in function get_empty_filp() might fail because of several reasons: - not enough memory for file structures - operation is not allowed - user is over its limit Currently the function returns NULL in all cases and we loose the exact reason of the error. All callers of get_empty_filp() assume that the function can fail with ENFILE only. Return error through pointer. Change all callers to preserve this error code. [AV: cleaned up a bit, carved the get_empty_filp() part out into a separate commit (things remaining here deal with alloc_file()), removed pipe(2) behaviour change] Signed-off-by: Anatol Pomozov <[email protected]> Reviewed-by: "Theodore Ts'o" <[email protected]> Signed-off-by: Al Viro <[email protected]>
2013-02-22new helper: file_inode(file)Al Viro9-26/+26
Signed-off-by: Al Viro <[email protected]>
2013-02-22SUNRPC: Don't start the retransmission timer when out of socket spaceTrond Myklebust1-1/+5
If the socket is full, we're better off just waiting until it empties, or until the connection is broken. The reason why we generally don't want to time out is that the call to xprt->ops->release_xprt() will trigger a connection reset, which isn't helpful... Let's make an exception for soft RPC calls, since they have to provide timeout guarantees. Signed-off-by: Trond Myklebust <[email protected]> Cc: [email protected]
2013-02-22tcp: fix SYN-data space mis-accountingYuchung Cheng1-7/+11
In fast open the sender unncessarily reduces the space available for data in SYN by 12 bytes. This is because in the sender incorrectly reserves space for TS option twice in tcp_send_syn_data(): tcp_mtu_to_mss() already accounts for TS option space. But it further reserves MAX_TCP_OPTION_SPACE when computing the payload space. Signed-off-by: Yuchung Cheng <[email protected]> Acked-by: Eric Dumazet <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2013-02-22sock: only define socket limit if mem cgroup configuredstephen hemminger1-0/+2
The mem cgroup socket limit is only used if the config option is enabled. Found with sparse Signed-off-by: Stephen Hemminger <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2013-02-22net: Fix locking bug in netif_set_xps_queueAlexander Duyck1-1/+3
Smatch found a locking bug in netif_set_xps_queue in which we were not releasing the lock in the case of an allocation failure. This change corrects that so that we release the xps_map_mutex before returning -ENOMEM in the case of an allocation failure. Signed-off-by: Alexander Duyck <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2013-02-22ipv4: fix error handling in icmp_protocol.Li Wei2-1/+24
Now we handle icmp errors in each transport protocol's err_handler, for icmp protocols, that is ping_err. Since this handler only care of those icmp errors triggered by echo request, errors triggered by echo reply(which sent by kernel) are sliently ignored. So wrap ping_err() with icmp_err() to deal with those icmp errors. Signed-off-by: Li Wei <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2013-02-21Merge branch 'for-linus' of ↵Linus Torvalds1-1/+4
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 update from Martin Schwidefsky: "The most prominent change in this patch set is the software dirty bit patch for s390. It removes __HAVE_ARCH_PAGE_TEST_AND_CLEAR_DIRTY and the page_test_and_clear_dirty primitive which makes the common memory management code a bit less obscure. Heiko fixed most of the PCI related fallout, more often than not missing GENERIC_HARDIRQS dependencies. Notable is one of the 3270 patches which adds an export to tty_io to be able to resize a tty. The rest is the usual bunch of cleanups and bug fixes." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (42 commits) s390/module: Add missing R_390_NONE relocation type drivers/gpio: add missing GENERIC_HARDIRQ dependency drivers/input: add couple of missing GENERIC_HARDIRQS dependencies s390/cleanup: rename SPP to LPP s390/mm: implement software dirty bits s390/mm: Fix crst upgrade of mmap with MAP_FIXED s390/linker skript: discard exit.data at runtime drivers/media: add missing GENERIC_HARDIRQS dependency s390/bpf,jit: add vlan tag support drivers/net,AT91RM9200: add missing GENERIC_HARDIRQS dependency iucv: fix kernel panic at reboot s390/Kconfig: sort list of arch selected config options phylib: remove !S390 dependeny from Kconfig uio: remove !S390 dependency from Kconfig dasd: fix sysfs cleanup in dasd_generic_remove s390/pci: fix hotplug module init s390/pci: cleanup clp page allocation s390/pci: cleanup clp inline assembly s390/perf: cpum_cf: fallback to software sampling events s390/mm: provide PAGE_SHARED define ...
2013-02-21Merge branch 'for-linus' of ↵Linus Torvalds4-4/+4
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial tree from Jiri Kosina: "Assorted tiny fixes queued in trivial tree" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (22 commits) DocBook: update EXPORT_SYMBOL entry to point at export.h Documentation: update top level 00-INDEX file with new additions ARM: at91/ide: remove unsused at91-ide Kconfig entry percpu_counter.h: comment code for better readability x86, efi: fix comment typo in head_32.S IB: cxgb3: delay freeing mem untill entirely done with it net: mvneta: remove unneeded version.h include time: x86: report_lost_ticks doesn't exist any more pcmcia: avoid static analysis complaint about use-after-free fs/jfs: Fix typo in comment : 'how may' -> 'how many' of: add missing documentation for of_platform_populate() btrfs: remove unnecessary cur_trans set before goto loop in join_transaction sound: soc: Fix typo in sound/codecs treewide: Fix typo in various drivers btrfs: fix comment typos Update ibmvscsi module name in Kconfig. powerpc: fix typo (utilties -> utilities) of: fix spelling mistake in comment h8300: Fix home page URL in h8300/README xtensa: Fix home page URL in Kconfig ...
2013-02-21Merge branch 'akpm' (incoming from Andrew)Linus Torvalds1-1/+1
Merge misc patches from Andrew Morton: - Florian has vanished so I appear to have become fbdev maintainer again :( - Joel and Mark are distracted to welcome to the new OCFS2 maintainer - The backlight queue - Small core kernel changes - lib/ updates - The rtc queue - Various random bits * akpm: (164 commits) rtc: rtc-davinci: use devm_*() functions rtc: rtc-max8997: use devm_request_threaded_irq() rtc: rtc-max8907: use devm_request_threaded_irq() rtc: rtc-da9052: use devm_request_threaded_irq() rtc: rtc-wm831x: use devm_request_threaded_irq() rtc: rtc-tps80031: use devm_request_threaded_irq() rtc: rtc-lp8788: use devm_request_threaded_irq() rtc: rtc-coh901331: use devm_clk_get() rtc: rtc-vt8500: use devm_*() functions rtc: rtc-tps6586x: use devm_request_threaded_irq() rtc: rtc-imxdi: use devm_clk_get() rtc: rtc-cmos: use dev_warn()/dev_dbg() instead of printk()/pr_debug() rtc: rtc-pcf8583: use dev_warn() instead of printk() rtc: rtc-sun4v: use pr_warn() instead of printk() rtc: rtc-vr41xx: use dev_info() instead of printk() rtc: rtc-rs5c313: use pr_err() instead of printk() rtc: rtc-at91rm9200: use dev_dbg()/dev_err() instead of printk()/pr_debug() rtc: rtc-rs5c372: use dev_dbg()/dev_warn() instead of printk()/pr_debug() rtc: rtc-ds2404: use dev_err() instead of printk() rtc: rtc-efi: use dev_err()/dev_warn()/pr_err() instead of printk() ...