| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sschmidt/wpan-next
Stefan Schmidt says:
====================
==
One of the biggest cycles for ieee802154 in a long time. We are landing the
first pieces of a big enhancements in managing PAN's. We might have another pull
request ready for this cycle later on, but I want to get this one out first.
Miquel Raynal added support for sending frames synchronously as a dependency
to handle MLME commands. Also introducing more filtering levels to match with
the needs of a device when scanning or operating as a pan coordinator.
To support development and testing the hwsim driver for ieee802154 was also
enhanced for the new filtering levels and to update the PIB attributes.
Alexander Aring fixed quite a few bugs spotted during reviewing changes. He
also added support for TRAC in the atusb driver to have better failure
handling if the firmware provides the needed information.
Jilin Yuan fixed a comment with a repeated word in it.
==================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Marc Kleine-Budde says:
====================
this is a pull request of 29 patches for net-next/master.
The first patch is by Daniel S. Trevitz and adds documentation for
switchable termination resistors.
Zhang Changzhong's patch fixes a debug output in the j13939 stack.
Oliver Hartkopp finally removes the pch_can driver, which is
superseded by the generic c_can driver.
Gustavo A. R. Silva replaces a zero-length array with
DECLARE_FLEX_ARRAY() in the ucan driver.
Kees Cook's patch removes a no longer needed silencing of
"-Warray-bounds" warnings for the kvaser_usb driver.
The next 2 patches target the m_can driver. The first is by me cleans
up the LEC error handling, the second is by Vivek Yadav and extends
the LEC error handling to the data phase of CAN-FD frames.
The next 9 patches all target the gs_usb driver. The first 5 patches
are by me and improve the Kconfig prompt and help text, set
netdev->dev_id to distinguish multi CAN channel devices, allow
loopback and listen only at the same time, and clean up the
gs_can_open() function a bit. The remaining 4 patches are by Jeroen
Hofstee and add support for 2 new features: Bus Error Reporting and
Get State.
Jimmy Assarsson and Anssi Hannula contribute 10 patches for the
kvaser_usb driver. They first add Listen Only and Bus Error Reporting
support, handle CMD_ERROR_EVENT errors, improve CAN state handling,
restart events, and configuration of the bit timing parameters.
Another patch by me which fixes the indention in the m_can driver.
A patch by Dongliang Mu cleans up the ucan_disconnect() function in
the ucan driver.
The last patch by Biju Das is for the rcan_canfd driver and cleans up
the reset handling.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
One of the worst offenders of "fake flexible arrays" is struct sockaddr,
as it is the classic example of why GCC and Clang have been traditionally
forced to treat all trailing arrays as fake flexible arrays: in the
distant misty past, sa_data became too small, and code started just
treating it as a flexible array, even though it was fixed-size. The
special case by the compiler is specifically that sizeof(sa->sa_data)
and FORTIFY_SOURCE (which uses __builtin_object_size(sa->sa_data, 1))
do not agree (14 and -1 respectively), which makes FORTIFY_SOURCE treat
it as a flexible array.
However, the coming -fstrict-flex-arrays compiler flag will remove
these special cases so that FORTIFY_SOURCE can gain coverage over all
the trailing arrays in the kernel that are _not_ supposed to be treated
as a flexible array. To deal with this change, convert sa_data to a true
flexible array. To keep the structure size the same, move sa_data into
a union with a newly introduced sa_data_min with the original size. The
result is that FORTIFY_SOURCE can continue to have no idea how large
sa_data may actually be, but anything using sizeof(sa->sa_data) must
switch to sizeof(sa->sa_data_min).
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Pavel Begunkov <asml.silence@gmail.com>
Cc: David Ahern <dsahern@kernel.org>
Cc: Dylan Yudaken <dylany@fb.com>
Cc: Yajun Deng <yajun.deng@linux.dev>
Cc: Petr Machata <petrm@nvidia.com>
Cc: Hangbin Liu <liuhangbin@gmail.com>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: syzbot <syzkaller@googlegroups.com>
Cc: Willem de Bruijn <willemb@google.com>
Cc: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20221018095503.never.671-kees@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
mptcp_setsockopt_sol_tcp_defer() was doing the same thing as
mptcp_setsockopt_first_sf_only() except for the returned code in case of
error.
Ignoring the error is needed to mimic how TCP_DEFER_ACCEPT is handled
when used with "plain" TCP sockets.
The specific function for TCP_DEFER_ACCEPT can be replaced by the new
mptcp_setsockopt_first_sf_only() helper and errors can be ignored to
stay compatible with TCP. A bit of cleanup.
Suggested-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The goal of this socket option is to configure MPTCP + TFO without
cookie per socket.
It was already possible to enable TFO without a cookie per netns by
setting net.ipv4.tcp_fastopen sysctl knob to the right value. Per route
was also supported by setting 'fastopen_no_cookie' option. This patch
adds a per socket support like it is possible to do with TCP thanks to
TCP_FASTOPEN_NO_COOKIE socket option.
The only thing to do here is to relay the request to the first subflow
like it is already done for TCP_FASTOPEN_CONNECT.
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
There are other socket options that need to act only on the first
subflow, e.g. all TCP_FASTOPEN* socket options.
This is similar to the getsockopt version.
In the next commit, this new mptcp_setsockopt_first_sf_only() helper is
used by other another option.
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Kazuho Oku reported that setsockopt(SO_INCOMING_CPU) does not work
with setsockopt(SO_REUSEPORT) since v4.6.
With the combination of SO_REUSEPORT and SO_INCOMING_CPU, we could
build a highly efficient server application.
setsockopt(SO_INCOMING_CPU) associates a CPU with a TCP listener
or UDP socket, and then incoming packets processed on the CPU will
likely be distributed to the socket. Technically, a socket could
even receive packets handled on another CPU if no sockets in the
reuseport group have the same CPU receiving the flow.
The logic exists in compute_score() so that a socket will get a higher
score if it has the same CPU with the flow. However, the score gets
ignored after the blamed two commits, which introduced a faster socket
selection algorithm for SO_REUSEPORT.
This patch introduces a counter of sockets with SO_INCOMING_CPU in
a reuseport group to check if we should iterate all sockets to find
a proper one. We increment the counter when
* calling listen() if the socket has SO_INCOMING_CPU and SO_REUSEPORT
* enabling SO_INCOMING_CPU if the socket is in a reuseport group
Also, we decrement it when
* detaching a socket out of the group to apply SO_INCOMING_CPU to
migrated TCP requests
* disabling SO_INCOMING_CPU if the socket is in a reuseport group
When the counter reaches 0, we can get back to the O(1) selection
algorithm.
The overall changes are negligible for the non-SO_INCOMING_CPU case,
and the only notable thing is that we have to update sk_incomnig_cpu
under reuseport_lock. Otherwise, the race prevents transitioning to
the O(n) algorithm and results in the wrong socket selection.
cpu1 (setsockopt) cpu2 (listen)
+-----------------+ +-------------+
lock_sock(sk1) lock_sock(sk2)
reuseport_update_incoming_cpu(sk1, val)
.
| /* set CPU as 0 */
|- WRITE_ONCE(sk1->incoming_cpu, val)
|
| spin_lock_bh(&reuseport_lock)
| reuseport_grow(sk2, reuse)
| .
| |- more_socks_size = reuse->max_socks * 2U;
| |- if (more_socks_size > U16_MAX &&
| | reuse->num_closed_socks)
| | .
| | |- RCU_INIT_POINTER(sk1->sk_reuseport_cb, NULL);
| | `- __reuseport_detach_closed_sock(sk1, reuse)
| | .
| | `- reuseport_put_incoming_cpu(sk1, reuse)
| | .
| | | /* Read shutdown()ed sk1's sk_incoming_cpu
| | | * without lock_sock().
| | | */
| | `- if (sk1->sk_incoming_cpu >= 0)
| | .
| | | /* decrement not-yet-incremented
| | | * count, which is never incremented.
| | | */
| | `- __reuseport_put_incoming_cpu(reuse);
| |
| `- spin_lock_bh(&reuseport_lock)
|
|- spin_lock_bh(&reuseport_lock)
|
|- reuse = rcu_dereference_protected(sk1->sk_reuseport_cb, ...)
|- if (!reuse)
| .
| | /* Cannot increment reuse->incoming_cpu. */
| `- goto out;
|
`- spin_unlock_bh(&reuseport_lock)
Fixes: e32ea7e74727 ("soreuseport: fast reuseport UDP socket selection")
Fixes: c125e80b8868 ("soreuseport: fast reuseport TCP socket selection")
Reported-by: Kazuho Oku <kazuhooku@gmail.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add support for skbedit queue mapping action on receive
side. This is supported only in hardware, so the skip_sw
flag is enforced. This enables offloading filters for
receive queue selection in the hardware using the
skbedit action. Traffic arrives on the Rx queue requested
in the skbedit action parameter. A new tc action flag
TCA_ACT_FLAGS_AT_INGRESS is introduced to identify the
traffic direction the action queue_mapping is requested
on during filter addition. This is used to disallow
offloading the skbedit queue mapping action on transmit
side.
Example:
$tc filter add dev $IFACE ingress protocol ip flower dst_ip $DST_IP\
action skbedit queue_mapping $rxq_id skip_sw
Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
Signed-off-by: Amritha Nambiar <amritha.nambiar@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
include/linux/net.h
a5ef058dc4d9 ("net: introduce and use custom sockopt socket flag")
e993ffe3da4b ("net: flag sockets supporting msghdr originated zerocopy")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bpf.
The net-memcg fix stands out, the rest is very run-off-the-mill. Maybe
I'm biased.
Current release - regressions:
- eth: fman: re-expose location of the MAC address to userspace,
apparently some udev scripts depended on the exact value
Current release - new code bugs:
- bpf:
- wait for busy refill_work when destroying bpf memory allocator
- allow bpf_user_ringbuf_drain() callbacks to return 1
- fix dispatcher patchable function entry to 5 bytes nop
Previous releases - regressions:
- net-memcg: avoid stalls when under memory pressure
- tcp: fix indefinite deferral of RTO with SACK reneging
- tipc: fix a null-ptr-deref in tipc_topsrv_accept
- eth: macb: specify PHY PM management done by MAC
- tcp: fix a signed-integer-overflow bug in tcp_add_backlog()
Previous releases - always broken:
- eth: amd-xgbe: SFP fixes and compatibility improvements
Misc:
- docs: netdev: offer performance feedback to contributors"
* tag 'net-6.1-rc3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (37 commits)
net-memcg: avoid stalls when under memory pressure
tcp: fix indefinite deferral of RTO with SACK reneging
tcp: fix a signed-integer-overflow bug in tcp_add_backlog()
net: lantiq_etop: don't free skb when returning NETDEV_TX_BUSY
net: fix UAF issue in nfqnl_nf_hook_drop() when ops_init() failed
docs: netdev: offer performance feedback to contributors
kcm: annotate data-races around kcm->rx_wait
kcm: annotate data-races around kcm->rx_psock
net: fman: Use physical address for userspace interfaces
net/mlx5e: Cleanup MACsec uninitialization routine
atlantic: fix deadlock at aq_nic_stop
nfp: only clean `sp_indiff` when application firmware is unloaded
amd-xgbe: add the bit rate quirk for Molex cables
amd-xgbe: fix the SFP compliance codes check for DAC cables
amd-xgbe: enable PLL_CTL for fixed PHY modes only
amd-xgbe: use enums for mailbox cmd and sub_cmds
amd-xgbe: Yellow carp devices do not need rrc
bpf: Use __llist_del_all() whenever possbile during memory draining
bpf: Wait for busy refill_work when destroying bpf memory allocator
MAINTAINERS: add keyword match on PTP
...
|
|
This commit fixes a bug that can cause a TCP data sender to repeatedly
defer RTOs when encountering SACK reneging.
The bug is that when we're in fast recovery in a scenario with SACK
reneging, every time we get an ACK we call tcp_check_sack_reneging()
and it can note the apparent SACK reneging and rearm the RTO timer for
srtt/2 into the future. In some SACK reneging scenarios that can
happen repeatedly until the receive window fills up, at which point
the sender can't send any more, the ACKs stop arriving, and the RTO
fires at srtt/2 after the last ACK. But that can take far too long
(O(10 secs)), since the connection is stuck in fast recovery with a
low cwnd that cannot grow beyond ssthresh, even if more bandwidth is
available.
This fix changes the logic in tcp_check_sack_reneging() to only rearm
the RTO timer if data is cumulatively ACKed, indicating forward
progress. This avoids this kind of nearly infinite loop of RTO timer
re-arming. In addition, this meets the goals of
tcp_check_sack_reneging() in handling Windows TCP behavior that looks
temporarily like SACK reneging but is not really.
Many thanks to Jakub Kicinski and Neil Spring, who reported this issue
and provided critical packet traces that enabled root-causing this
issue. Also, many thanks to Jakub Kicinski for testing this fix.
Fixes: 5ae344c949e7 ("tcp: reduce spurious retransmits due to transient SACK reneging")
Reported-by: Jakub Kicinski <kuba@kernel.org>
Reported-by: Neil Spring <ntspring@fb.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Cc: Yuchung Cheng <ycheng@google.com>
Tested-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20221021170821.1093930-1-ncardwell.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The type of sk_rcvbuf and sk_sndbuf in struct sock is int, and
in tcp_add_backlog(), the variable limit is caculated by adding
sk_rcvbuf, sk_sndbuf and 64 * 1024, it may exceed the max value
of int and overflow. This patch reduces the limit budget by
halving the sndbuf to solve this issue since ACK packets are much
smaller than the payload.
Fixes: c9c3321257e1 ("tcp: add tcp_add_backlog()")
Signed-off-by: Lu Wei <luwei32@huawei.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
skb_pp_recycle() is only used by skb_free_head() in
skbuff.c, so move it to skbuff.c.
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The parameter 'msg' has never been used by __sock_cmsg_send, so we can remove it
safely.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: xu xin <xu.xin16@zte.com.cn>
Reviewed-by: Zhang Yunkai <zhang.yunkai@zte.com.cn>
Acked-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When the ops_init() interface is invoked to initialize the net, but
ops->init() fails, data is released. However, the ptr pointer in
net->gen is invalid. In this case, when nfqnl_nf_hook_drop() is invoked
to release the net, invalid address access occurs.
The process is as follows:
setup_net()
ops_init()
data = kzalloc(...) ---> alloc "data"
net_assign_generic() ---> assign "date" to ptr in net->gen
...
ops->init() ---> failed
...
kfree(data); ---> ptr in net->gen is invalid
...
ops_exit_list()
...
nfqnl_nf_hook_drop()
*q = nfnl_queue_pernet(net) ---> q is invalid
The following is the Call Trace information:
BUG: KASAN: use-after-free in nfqnl_nf_hook_drop+0x264/0x280
Read of size 8 at addr ffff88810396b240 by task ip/15855
Call Trace:
<TASK>
dump_stack_lvl+0x8e/0xd1
print_report+0x155/0x454
kasan_report+0xba/0x1f0
nfqnl_nf_hook_drop+0x264/0x280
nf_queue_nf_hook_drop+0x8b/0x1b0
__nf_unregister_net_hook+0x1ae/0x5a0
nf_unregister_net_hooks+0xde/0x130
ops_exit_list+0xb0/0x170
setup_net+0x7ac/0xbd0
copy_net_ns+0x2e6/0x6b0
create_new_namespaces+0x382/0xa50
unshare_nsproxy_namespaces+0xa6/0x1c0
ksys_unshare+0x3a4/0x7e0
__x64_sys_unshare+0x2d/0x40
do_syscall_64+0x35/0x80
entry_SYSCALL_64_after_hwframe+0x46/0xb0
</TASK>
Allocated by task 15855:
kasan_save_stack+0x1e/0x40
kasan_set_track+0x21/0x30
__kasan_kmalloc+0xa1/0xb0
__kmalloc+0x49/0xb0
ops_init+0xe7/0x410
setup_net+0x5aa/0xbd0
copy_net_ns+0x2e6/0x6b0
create_new_namespaces+0x382/0xa50
unshare_nsproxy_namespaces+0xa6/0x1c0
ksys_unshare+0x3a4/0x7e0
__x64_sys_unshare+0x2d/0x40
do_syscall_64+0x35/0x80
entry_SYSCALL_64_after_hwframe+0x46/0xb0
Freed by task 15855:
kasan_save_stack+0x1e/0x40
kasan_set_track+0x21/0x30
kasan_save_free_info+0x2a/0x40
____kasan_slab_free+0x155/0x1b0
slab_free_freelist_hook+0x11b/0x220
__kmem_cache_free+0xa4/0x360
ops_init+0xb9/0x410
setup_net+0x5aa/0xbd0
copy_net_ns+0x2e6/0x6b0
create_new_namespaces+0x382/0xa50
unshare_nsproxy_namespaces+0xa6/0x1c0
ksys_unshare+0x3a4/0x7e0
__x64_sys_unshare+0x2d/0x40
do_syscall_64+0x35/0x80
entry_SYSCALL_64_after_hwframe+0x46/0xb0
Fixes: f875bae06533 ("net: Automatically allocate per namespace data.")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit ffa84b5ffb37 ("net: add netns refcount tracker to struct sock")
added a tracker to sockets, but did not track kernel sockets.
We still have syzbot reports hinting about netns being destroyed
while some kernel TCP sockets had not been dismantled.
This patch tracks kernel sockets, and adds a ref_tracker_dir_print()
call to net_free() right before the netns is freed.
Normally, each layer is responsible for properly releasing its
kernel sockets before last call to net_free().
This debugging facility is enabled with CONFIG_NET_NS_REFCNT_TRACKER=y
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Tested-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
kcm->rx_psock can be read locklessly in kcm_rfree().
Annotate the read and writes accordingly.
syzbot reported:
BUG: KCSAN: data-race in kcm_rcv_strparser / kcm_rfree
write to 0xffff88810784e3d0 of 1 bytes by task 1823 on cpu 1:
reserve_rx_kcm net/kcm/kcmsock.c:283 [inline]
kcm_rcv_strparser+0x250/0x3a0 net/kcm/kcmsock.c:363
__strp_recv+0x64c/0xd20 net/strparser/strparser.c:301
strp_recv+0x6d/0x80 net/strparser/strparser.c:335
tcp_read_sock+0x13e/0x5a0 net/ipv4/tcp.c:1703
strp_read_sock net/strparser/strparser.c:358 [inline]
do_strp_work net/strparser/strparser.c:406 [inline]
strp_work+0xe8/0x180 net/strparser/strparser.c:415
process_one_work+0x3d3/0x720 kernel/workqueue.c:2289
worker_thread+0x618/0xa70 kernel/workqueue.c:2436
kthread+0x1a9/0x1e0 kernel/kthread.c:376
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:306
read to 0xffff88810784e3d0 of 1 bytes by task 17869 on cpu 0:
kcm_rfree+0x121/0x220 net/kcm/kcmsock.c:181
skb_release_head_state+0x8e/0x160 net/core/skbuff.c:841
skb_release_all net/core/skbuff.c:852 [inline]
__kfree_skb net/core/skbuff.c:868 [inline]
kfree_skb_reason+0x5c/0x260 net/core/skbuff.c:891
kfree_skb include/linux/skbuff.h:1216 [inline]
kcm_recvmsg+0x226/0x2b0 net/kcm/kcmsock.c:1161
____sys_recvmsg+0x16c/0x2e0
___sys_recvmsg net/socket.c:2743 [inline]
do_recvmmsg+0x2f1/0x710 net/socket.c:2837
__sys_recvmmsg net/socket.c:2916 [inline]
__do_sys_recvmmsg net/socket.c:2939 [inline]
__se_sys_recvmmsg net/socket.c:2932 [inline]
__x64_sys_recvmmsg+0xde/0x160 net/socket.c:2932
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x2b/0x70 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
value changed: 0x01 -> 0x00
Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 17869 Comm: syz-executor.2 Not tainted 6.1.0-rc1-syzkaller-00010-gbb1a1146467a-dirty #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/22/2022
Fixes: ab7ac4eb9832 ("kcm: Kernel Connection Multiplexor module")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
kcm->rx_psock can be read locklessly in kcm_rfree().
Annotate the read and writes accordingly.
We do the same for kcm->rx_wait in the following patch.
syzbot reported:
BUG: KCSAN: data-race in kcm_rfree / unreserve_rx_kcm
write to 0xffff888123d827b8 of 8 bytes by task 2758 on cpu 1:
unreserve_rx_kcm+0x72/0x1f0 net/kcm/kcmsock.c:313
kcm_rcv_strparser+0x2b5/0x3a0 net/kcm/kcmsock.c:373
__strp_recv+0x64c/0xd20 net/strparser/strparser.c:301
strp_recv+0x6d/0x80 net/strparser/strparser.c:335
tcp_read_sock+0x13e/0x5a0 net/ipv4/tcp.c:1703
strp_read_sock net/strparser/strparser.c:358 [inline]
do_strp_work net/strparser/strparser.c:406 [inline]
strp_work+0xe8/0x180 net/strparser/strparser.c:415
process_one_work+0x3d3/0x720 kernel/workqueue.c:2289
worker_thread+0x618/0xa70 kernel/workqueue.c:2436
kthread+0x1a9/0x1e0 kernel/kthread.c:376
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:306
read to 0xffff888123d827b8 of 8 bytes by task 5859 on cpu 0:
kcm_rfree+0x14c/0x220 net/kcm/kcmsock.c:181
skb_release_head_state+0x8e/0x160 net/core/skbuff.c:841
skb_release_all net/core/skbuff.c:852 [inline]
__kfree_skb net/core/skbuff.c:868 [inline]
kfree_skb_reason+0x5c/0x260 net/core/skbuff.c:891
kfree_skb include/linux/skbuff.h:1216 [inline]
kcm_recvmsg+0x226/0x2b0 net/kcm/kcmsock.c:1161
____sys_recvmsg+0x16c/0x2e0
___sys_recvmsg net/socket.c:2743 [inline]
do_recvmmsg+0x2f1/0x710 net/socket.c:2837
__sys_recvmmsg net/socket.c:2916 [inline]
__do_sys_recvmmsg net/socket.c:2939 [inline]
__se_sys_recvmmsg net/socket.c:2932 [inline]
__x64_sys_recvmmsg+0xde/0x160 net/socket.c:2932
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x2b/0x70 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
value changed: 0xffff88812971ce00 -> 0x0000000000000000
Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 5859 Comm: syz-executor.3 Not tainted 6.0.0-syzkaller-12189-g19d17ab7c68b-dirty #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/22/2022
Fixes: ab7ac4eb9832 ("kcm: Kernel Connection Multiplexor module")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When the receiver process and the BH runs on different cores,
udp_rmem_release() experience a cache miss while accessing sk_rcvbuf,
as the latter shares the same cacheline with sk_forward_alloc, written
by the BH.
With this patch, UDP tracks the rcvbuf value and its update via custom
SOL_SOCKET socket options, and copies the forward memory threshold value
used by udp_rmem_release() in a different cacheline, already accessed by
the above function and uncontended.
Since the UDP socket init operation grown a bit, factor out the common
code between v4 and v6 in a shared helper.
Overall the above give a 10% peek throughput increase under UDP flood.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We will soon introduce custom setsockopt for UDP sockets, too.
Instead of doing even more complex arbitrary checks inside
sock_use_custom_sol_socket(), add a new socket flag and set it
for the relevant socket types (currently only MPTCP).
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add support for 800Gbps speed, link modes of 100Gbps per lane.
As mentioned in slide 21 in IEEE documentation [1], all adopted 802.3df
copper and optical PMDs baselines using 100G/lane will be supported.
Add the relevant PMDs which are mentioned in slide 5 in IEEE
documentation [1] and were approved on 10-2022 [2]:
BP - KR8
Cu Cable - CR8
MMF 50m - VR8
MMF 100m - SR8
SMF 500m - DR8
SMF 2km - DR8-2
[1]: https://www.ieee802.org/3/df/public/22_10/22_1004/shrikhande_3df_01a_221004.pdf
[2]: https://ieee802.org/3/df/KeyMotions_3df_221005.pdf
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We can reuse the unlock label above and need not repeat the same code.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The last user of inet6_destroy_sock() is its wrapper inet6_cleanup_sock().
Let's rename inet6_destroy_sock() to inet6_cleanup_sock().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
After commit d38afeec26ed ("tcp/udp: Call inet6_destroy_sock()
in IPv6 sk->sk_destruct()."), we call inet6_destroy_sock() in
sk->sk_destruct() by setting inet6_sock_destruct() to it to make
sure we do not leak inet6-specific resources.
SCTP sets its own sk->sk_destruct() in the sctp_init_sock(), and
SCTPv6 socket reuses it as the init function.
To call inet6_sock_destruct() from SCTPv6 sk->sk_destruct(), we
set sctp_v6_destruct_sock() in a new init function.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
After commit d38afeec26ed ("tcp/udp: Call inet6_destroy_sock()
in IPv6 sk->sk_destruct()."), we call inet6_destroy_sock() in
sk->sk_destruct() by setting inet6_sock_destruct() to it to make
sure we do not leak inet6-specific resources.
DCCP sets its own sk->sk_destruct() in the dccp_init_sock(), and
DCCPv6 socket shares it by calling the same init function via
dccp_v6_init_sock().
To call inet6_sock_destruct() from DCCPv6 sk->sk_destruct(), we
export it and set dccp_v6_sk_destruct() in the init function.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
After commit d38afeec26ed ("tcp/udp: Call inet6_destroy_sock()
in IPv6 sk->sk_destruct()."), we call inet6_destroy_sock() in
sk->sk_destruct() by setting inet6_sock_destruct() to it to make
sure we do not leak inet6-specific resources.
Now we can remove unnecessary inet6_destroy_sock() calls in
sk->sk_prot->destroy().
DCCP and SCTP have their own sk->sk_destruct() function, so we
change them separately in the following patches.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We now have a fine grained filtering information so let's ensure proper
filtering in scan mode, which means that only beacons are processed.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/r/20221019134423.877169-4-miquel.raynal@bootlin.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
|
|
Pull io_uring follow-up from Jens Axboe:
"Currently the zero-copy has automatic fallback to normal transmit, and
it was decided that it'd be cleaner to return an error instead if the
socket type doesn't support it.
Zero-copy does work with UDP and TCP, it's more of a future proofing
kind of thing (eg for samba)"
* tag 'io_uring-6.1-2022-10-22' of git://git.kernel.dk/linux:
io_uring/net: fail zc sendmsg when unsupported by socket
io_uring/net: fail zc send when unsupported by socket
net: flag sockets supporting msghdr originated zerocopy
|
|
We need an efficient way in io_uring to check whether a socket supports
zerocopy with msghdr provided ubuf_info. Add a new flag into the struct
socket flags fields.
Cc: <stable@vger.kernel.org> # 6.0
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/3dafafab822b1c66308bb58a0ac738b1e3f53f74.1666346426.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
ethnl_default_dump_one() passes NULL as info.
It's correct not to set extack during dump, as we should just
silently skip interfaces which can't provide the information.
Reported-by: syzbot+81c4b4bbba6eea2cfcae@syzkaller.appspotmail.com
Fixes: 18ff0bcda6d1 ("ethtool: add interface to interact with Ethernet Power Equipment")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
After commit 178ca044aa60 ("sctp: Make sctp_enqueue_event tak an
skb list."), skb_list cannot be NULL.
Detected using the static analysis tool - Svace.
Signed-off-by: Alexey Kodanev <aleksei.kodanev@bell-sw.com>
Reviewed-by: Xin Long <lucien.xin@gmail.com>
Link: https://lore.kernel.org/r/20221019180735.161388-3-aleksei.kodanev@bell-sw.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
After commit 013b96ec6461 ("sctp: Pass sk_buff_head explicitly to
sctp_ulpq_tail_event().") there is one more unneeded check of
skb_list for NULL.
Detected using the static analysis tool - Svace.
Signed-off-by: Alexey Kodanev <aleksei.kodanev@bell-sw.com>
Reviewed-by: Xin Long <lucien.xin@gmail.com>
Link: https://lore.kernel.org/r/20221019180735.161388-2-aleksei.kodanev@bell-sw.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
'&asoc->ulpq' passed to sctp_ulpq_init() as the first argument,
then sctp_qlpq_init() initializes it and eventually returns the
address of the struct member back. Therefore, in this case, the
return pointer cannot be NULL.
Moreover, it seems sctp_ulpq_init() has always been used only in
sctp_association_init(), so there's really no need to return ulpq
anymore.
Detected using the static analysis tool - Svace.
Signed-off-by: Alexey Kodanev <aleksei.kodanev@bell-sw.com>
Reviewed-by: Xin Long <lucien.xin@gmail.com>
Link: https://lore.kernel.org/r/20221019180735.161388-1-aleksei.kodanev@bell-sw.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
syzbot found a crash in tipc_topsrv_accept:
KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f]
Workqueue: tipc_rcv tipc_topsrv_accept
RIP: 0010:kernel_accept+0x22d/0x350 net/socket.c:3487
Call Trace:
<TASK>
tipc_topsrv_accept+0x197/0x280 net/tipc/topsrv.c:460
process_one_work+0x991/0x1610 kernel/workqueue.c:2289
worker_thread+0x665/0x1080 kernel/workqueue.c:2436
kthread+0x2e4/0x3a0 kernel/kthread.c:376
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:306
It was caused by srv->listener that might be set to null by
tipc_topsrv_stop() in net .exit whereas it's still used in
tipc_topsrv_accept() worker.
srv->listener is protected by srv->idr_lock in tipc_topsrv_stop(), so add
a check for srv->listener under srv->idr_lock in tipc_topsrv_accept() to
avoid the null-ptr-deref. To ensure the lsock is not released during the
tipc_topsrv_accept(), move sock_release() after tipc_topsrv_work_stop()
where it's waiting until the tipc_topsrv_accept worker to be done.
Note that sk_callback_lock is used to protect sk->sk_user_data instead of
srv->listener, and it should check srv in tipc_topsrv_listener_data_ready()
instead. This also ensures that no more tipc_topsrv_accept worker will be
started after tipc_conn_close() is called in tipc_topsrv_stop() where it
sets sk->sk_user_data to null.
Fixes: 0ef897be12b8 ("tipc: separate topology server listener socket from subcsriber sockets")
Reported-by: syzbot+c5ce866a8d30f4be0651@syzkaller.appspotmail.com
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Jon Maloy <jmaloy@redhat.com>
Link: https://lore.kernel.org/r/4eee264380c409c61c6451af1059b7fb271a7e7b.1666120790.git.lucien.xin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
No conflicts.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from netfilter.
Current release - regressions:
- revert "net: fix cpu_max_bits_warn() usage in
netif_attrmask_next{,_and}"
- revert "net: sched: fq_codel: remove redundant resource cleanup in
fq_codel_init()"
- dsa: uninitialized variable in dsa_slave_netdevice_event()
- eth: sunhme: uninitialized variable in happy_meal_init()
Current release - new code bugs:
- eth: octeontx2: fix resource not freed after malloc
Previous releases - regressions:
- sched: fix return value of qdisc ingress handling on success
- sched: fix race condition in qdisc_graft()
- udp: update reuse->has_conns under reuseport_lock.
- tls: strp: make sure the TCP skbs do not have overlapping data
- hsr: avoid possible NULL deref in skb_clone()
- tipc: fix an information leak in tipc_topsrv_kern_subscr
- phylink: add mac_managed_pm in phylink_config structure
- eth: i40e: fix DMA mappings leak
- eth: hyperv: fix a RX-path warning
- eth: mtk: fix memory leaks
Previous releases - always broken:
- sched: cake: fix null pointer access issue when cake_init() fails"
* tag 'net-6.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (43 commits)
net: phy: dp83822: disable MDI crossover status change interrupt
net: sched: fix race condition in qdisc_graft()
net: hns: fix possible memory leak in hnae_ae_register()
wwan_hwsim: fix possible memory leak in wwan_hwsim_dev_new()
sfc: include vport_id in filter spec hash and equal()
genetlink: fix kdoc warnings
selftests: add selftest for chaining of tc ingress handling to egress
net: Fix return value of qdisc ingress handling on success
net: sched: sfb: fix null pointer access issue when sfb_init() fails
Revert "net: sched: fq_codel: remove redundant resource cleanup in fq_codel_init()"
net: sched: cake: fix null pointer access issue when cake_init() fails
ethernet: marvell: octeontx2 Fix resource not freed after malloc
netfilter: nf_tables: relax NFTA_SET_ELEM_KEY_END set flags requirements
netfilter: rpfilter/fib: Set ->flowic_uid correctly for user namespaces.
ionic: catch NULL pointer issue on reconfig
net: hsr: avoid possible NULL deref in skb_clone()
bnxt_en: fix memory leak in bnxt_nvm_test()
ip6mr: fix UAF issue in ip6mr_sk_done() when addrconf_init_net() failed
udp: Update reuse->has_conns under reuseport_lock.
net: ethernet: mediatek: ppe: Remove the unused function mtk_foe_entry_usable()
...
|
|
We had one syzbot report [1] in syzbot queue for a while.
I was waiting for more occurrences and/or a repro but
Dmitry Vyukov spotted the issue right away.
<quoting Dmitry>
qdisc_graft() drops reference to qdisc in notify_and_destroy
while it's still assigned to dev->qdisc
</quoting>
Indeed, RCU rules are clear when replacing a data structure.
The visible pointer (dev->qdisc in this case) must be updated
to the new object _before_ RCU grace period is started
(qdisc_put(old) in this case).
[1]
BUG: KASAN: use-after-free in __tcf_qdisc_find.part.0+0xa3a/0xac0 net/sched/cls_api.c:1066
Read of size 4 at addr ffff88802065e038 by task syz-executor.4/21027
CPU: 0 PID: 21027 Comm: syz-executor.4 Not tainted 6.0.0-rc3-syzkaller-00363-g7726d4c3e60b #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/26/2022
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106
print_address_description mm/kasan/report.c:317 [inline]
print_report.cold+0x2ba/0x719 mm/kasan/report.c:433
kasan_report+0xb1/0x1e0 mm/kasan/report.c:495
__tcf_qdisc_find.part.0+0xa3a/0xac0 net/sched/cls_api.c:1066
__tcf_qdisc_find net/sched/cls_api.c:1051 [inline]
tc_new_tfilter+0x34f/0x2200 net/sched/cls_api.c:2018
rtnetlink_rcv_msg+0x955/0xca0 net/core/rtnetlink.c:6081
netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2501
netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline]
netlink_unicast+0x543/0x7f0 net/netlink/af_netlink.c:1345
netlink_sendmsg+0x917/0xe10 net/netlink/af_netlink.c:1921
sock_sendmsg_nosec net/socket.c:714 [inline]
sock_sendmsg+0xcf/0x120 net/socket.c:734
____sys_sendmsg+0x6eb/0x810 net/socket.c:2482
___sys_sendmsg+0x110/0x1b0 net/socket.c:2536
__sys_sendmsg+0xf3/0x1c0 net/socket.c:2565
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7f5efaa89279
Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f5efbc31168 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00007f5efab9bf80 RCX: 00007f5efaa89279
RDX: 0000000000000000 RSI: 0000000020000140 RDI: 0000000000000005
RBP: 00007f5efaae32e9 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 00007f5efb0cfb1f R14: 00007f5efbc31300 R15: 0000000000022000
</TASK>
Allocated by task 21027:
kasan_save_stack+0x1e/0x40 mm/kasan/common.c:38
kasan_set_track mm/kasan/common.c:45 [inline]
set_alloc_info mm/kasan/common.c:437 [inline]
____kasan_kmalloc mm/kasan/common.c:516 [inline]
____kasan_kmalloc mm/kasan/common.c:475 [inline]
__kasan_kmalloc+0xa9/0xd0 mm/kasan/common.c:525
kmalloc_node include/linux/slab.h:623 [inline]
kzalloc_node include/linux/slab.h:744 [inline]
qdisc_alloc+0xb0/0xc50 net/sched/sch_generic.c:938
qdisc_create_dflt+0x71/0x4a0 net/sched/sch_generic.c:997
attach_one_default_qdisc net/sched/sch_generic.c:1152 [inline]
netdev_for_each_tx_queue include/linux/netdevice.h:2437 [inline]
attach_default_qdiscs net/sched/sch_generic.c:1170 [inline]
dev_activate+0x760/0xcd0 net/sched/sch_generic.c:1229
__dev_open+0x393/0x4d0 net/core/dev.c:1441
__dev_change_flags+0x583/0x750 net/core/dev.c:8556
rtnl_configure_link+0xee/0x240 net/core/rtnetlink.c:3189
rtnl_newlink_create net/core/rtnetlink.c:3371 [inline]
__rtnl_newlink+0x10b8/0x17e0 net/core/rtnetlink.c:3580
rtnl_newlink+0x64/0xa0 net/core/rtnetlink.c:3593
rtnetlink_rcv_msg+0x43a/0xca0 net/core/rtnetlink.c:6090
netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2501
netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline]
netlink_unicast+0x543/0x7f0 net/netlink/af_netlink.c:1345
netlink_sendmsg+0x917/0xe10 net/netlink/af_netlink.c:1921
sock_sendmsg_nosec net/socket.c:714 [inline]
sock_sendmsg+0xcf/0x120 net/socket.c:734
____sys_sendmsg+0x6eb/0x810 net/socket.c:2482
___sys_sendmsg+0x110/0x1b0 net/socket.c:2536
__sys_sendmsg+0xf3/0x1c0 net/socket.c:2565
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Freed by task 21020:
kasan_save_stack+0x1e/0x40 mm/kasan/common.c:38
kasan_set_track+0x21/0x30 mm/kasan/common.c:45
kasan_set_free_info+0x20/0x30 mm/kasan/generic.c:370
____kasan_slab_free mm/kasan/common.c:367 [inline]
____kasan_slab_free+0x166/0x1c0 mm/kasan/common.c:329
kasan_slab_free include/linux/kasan.h:200 [inline]
slab_free_hook mm/slub.c:1754 [inline]
slab_free_freelist_hook+0x8b/0x1c0 mm/slub.c:1780
slab_free mm/slub.c:3534 [inline]
kfree+0xe2/0x580 mm/slub.c:4562
rcu_do_batch kernel/rcu/tree.c:2245 [inline]
rcu_core+0x7b5/0x1890 kernel/rcu/tree.c:2505
__do_softirq+0x1d3/0x9c6 kernel/softirq.c:571
Last potentially related work creation:
kasan_save_stack+0x1e/0x40 mm/kasan/common.c:38
__kasan_record_aux_stack+0xbe/0xd0 mm/kasan/generic.c:348
call_rcu+0x99/0x790 kernel/rcu/tree.c:2793
qdisc_put+0xcd/0xe0 net/sched/sch_generic.c:1083
notify_and_destroy net/sched/sch_api.c:1012 [inline]
qdisc_graft+0xeb1/0x1270 net/sched/sch_api.c:1084
tc_modify_qdisc+0xbb7/0x1a00 net/sched/sch_api.c:1671
rtnetlink_rcv_msg+0x43a/0xca0 net/core/rtnetlink.c:6090
netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2501
netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline]
netlink_unicast+0x543/0x7f0 net/netlink/af_netlink.c:1345
netlink_sendmsg+0x917/0xe10 net/netlink/af_netlink.c:1921
sock_sendmsg_nosec net/socket.c:714 [inline]
sock_sendmsg+0xcf/0x120 net/socket.c:734
____sys_sendmsg+0x6eb/0x810 net/socket.c:2482
___sys_sendmsg+0x110/0x1b0 net/socket.c:2536
__sys_sendmsg+0xf3/0x1c0 net/socket.c:2565
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Second to last potentially related work creation:
kasan_save_stack+0x1e/0x40 mm/kasan/common.c:38
__kasan_record_aux_stack+0xbe/0xd0 mm/kasan/generic.c:348
kvfree_call_rcu+0x74/0x940 kernel/rcu/tree.c:3322
neigh_destroy+0x431/0x630 net/core/neighbour.c:912
neigh_release include/net/neighbour.h:454 [inline]
neigh_cleanup_and_release+0x1f8/0x330 net/core/neighbour.c:103
neigh_del net/core/neighbour.c:225 [inline]
neigh_remove_one+0x37d/0x460 net/core/neighbour.c:246
neigh_forced_gc net/core/neighbour.c:276 [inline]
neigh_alloc net/core/neighbour.c:447 [inline]
___neigh_create+0x18b5/0x29a0 net/core/neighbour.c:642
ip6_finish_output2+0xfb8/0x1520 net/ipv6/ip6_output.c:125
__ip6_finish_output net/ipv6/ip6_output.c:195 [inline]
ip6_finish_output+0x690/0x1160 net/ipv6/ip6_output.c:206
NF_HOOK_COND include/linux/netfilter.h:296 [inline]
ip6_output+0x1ed/0x540 net/ipv6/ip6_output.c:227
dst_output include/net/dst.h:451 [inline]
NF_HOOK include/linux/netfilter.h:307 [inline]
NF_HOOK include/linux/netfilter.h:301 [inline]
mld_sendpack+0xa09/0xe70 net/ipv6/mcast.c:1820
mld_send_cr net/ipv6/mcast.c:2121 [inline]
mld_ifc_work+0x71c/0xdc0 net/ipv6/mcast.c:2653
process_one_work+0x991/0x1610 kernel/workqueue.c:2289
worker_thread+0x665/0x1080 kernel/workqueue.c:2436
kthread+0x2e4/0x3a0 kernel/kthread.c:376
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:306
The buggy address belongs to the object at ffff88802065e000
which belongs to the cache kmalloc-1k of size 1024
The buggy address is located 56 bytes inside of
1024-byte region [ffff88802065e000, ffff88802065e400)
The buggy address belongs to the physical page:
page:ffffea0000819600 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x20658
head:ffffea0000819600 order:3 compound_mapcount:0 compound_pincount:0
flags: 0xfff00000010200(slab|head|node=0|zone=1|lastcpupid=0x7ff)
raw: 00fff00000010200 0000000000000000 dead000000000001 ffff888011841dc0
raw: 0000000000000000 0000000000100010 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
page_owner tracks the page as allocated
page last allocated via order 3, migratetype Unmovable, gfp_mask 0xd20c0(__GFP_IO|__GFP_FS|__GFP_NOWARN|__GFP_NORETRY|__GFP_COMP|__GFP_NOMEMALLOC), pid 3523, tgid 3523 (sshd), ts 41495190986, free_ts 41417713212
prep_new_page mm/page_alloc.c:2532 [inline]
get_page_from_freelist+0x109b/0x2ce0 mm/page_alloc.c:4283
__alloc_pages+0x1c7/0x510 mm/page_alloc.c:5515
alloc_pages+0x1a6/0x270 mm/mempolicy.c:2270
alloc_slab_page mm/slub.c:1824 [inline]
allocate_slab+0x27e/0x3d0 mm/slub.c:1969
new_slab mm/slub.c:2029 [inline]
___slab_alloc+0x7f1/0xe10 mm/slub.c:3031
__slab_alloc.constprop.0+0x4d/0xa0 mm/slub.c:3118
slab_alloc_node mm/slub.c:3209 [inline]
__kmalloc_node_track_caller+0x2f2/0x380 mm/slub.c:4955
kmalloc_reserve net/core/skbuff.c:358 [inline]
__alloc_skb+0xd9/0x2f0 net/core/skbuff.c:430
alloc_skb_fclone include/linux/skbuff.h:1307 [inline]
tcp_stream_alloc_skb+0x38/0x580 net/ipv4/tcp.c:861
tcp_sendmsg_locked+0xc36/0x2f80 net/ipv4/tcp.c:1325
tcp_sendmsg+0x2b/0x40 net/ipv4/tcp.c:1483
inet_sendmsg+0x99/0xe0 net/ipv4/af_inet.c:819
sock_sendmsg_nosec net/socket.c:714 [inline]
sock_sendmsg+0xcf/0x120 net/socket.c:734
sock_write_iter+0x291/0x3d0 net/socket.c:1108
call_write_iter include/linux/fs.h:2187 [inline]
new_sync_write fs/read_write.c:491 [inline]
vfs_write+0x9e9/0xdd0 fs/read_write.c:578
ksys_write+0x1e8/0x250 fs/read_write.c:631
page last free stack trace:
reset_page_owner include/linux/page_owner.h:24 [inline]
free_pages_prepare mm/page_alloc.c:1449 [inline]
free_pcp_prepare+0x5e4/0xd20 mm/page_alloc.c:1499
free_unref_page_prepare mm/page_alloc.c:3380 [inline]
free_unref_page+0x19/0x4d0 mm/page_alloc.c:3476
__unfreeze_partials+0x17c/0x1a0 mm/slub.c:2548
qlink_free mm/kasan/quarantine.c:168 [inline]
qlist_free_all+0x6a/0x170 mm/kasan/quarantine.c:187
kasan_quarantine_reduce+0x180/0x200 mm/kasan/quarantine.c:294
__kasan_slab_alloc+0xa2/0xc0 mm/kasan/common.c:447
kasan_slab_alloc include/linux/kasan.h:224 [inline]
slab_post_alloc_hook mm/slab.h:727 [inline]
slab_alloc_node mm/slub.c:3243 [inline]
slab_alloc mm/slub.c:3251 [inline]
__kmem_cache_alloc_lru mm/slub.c:3258 [inline]
kmem_cache_alloc+0x267/0x3b0 mm/slub.c:3268
kmem_cache_zalloc include/linux/slab.h:723 [inline]
alloc_buffer_head+0x20/0x140 fs/buffer.c:2974
alloc_page_buffers+0x280/0x790 fs/buffer.c:829
create_empty_buffers+0x2c/0xee0 fs/buffer.c:1558
ext4_block_write_begin+0x1004/0x1530 fs/ext4/inode.c:1074
ext4_da_write_begin+0x422/0xae0 fs/ext4/inode.c:2996
generic_perform_write+0x246/0x560 mm/filemap.c:3738
ext4_buffered_write_iter+0x15b/0x460 fs/ext4/file.c:270
ext4_file_write_iter+0x44a/0x1660 fs/ext4/file.c:679
call_write_iter include/linux/fs.h:2187 [inline]
new_sync_write fs/read_write.c:491 [inline]
vfs_write+0x9e9/0xdd0 fs/read_write.c:578
Fixes: af356afa010f ("net_sched: reintroduce dev->qdisc for use by sch_api")
Reported-by: syzbot <syzkaller@googlegroups.com>
Diagnosed-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20221018203258.2793282-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Round up allocations with kmalloc_size_roundup() so that openvswitch's
use of ksize() is always accurate and no special handling of the memory
is needed by KASAN, UBSAN_BOUNDS, nor FORTIFY_SOURCE.
Cc: Pravin B Shelar <pshelar@ovn.org>
Cc: dev@openvswitch.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20221018090628.never.537-kees@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
1) Missing flowi uid field in nft_fib expression, from Guillaume Nault.
This is broken since the creation of the fib expression.
2) Relax sanity check to fix bogus EINVAL error when deleting elements
belonging set intervals. Broken since 6.0-rc.
* git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nf_tables: relax NFTA_SET_ELEM_KEY_END set flags requirements
netfilter: rpfilter/fib: Set ->flowic_uid correctly for user namespaces.
====================
Link: https://lore.kernel.org/r/20221019065225.1006344-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use "%s" instead of "%p" to print function name in debug info.
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/all/1664520728-4644-1-git-send-email-zhangchangzhong@huawei.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Currently qdisc ingress handling (sch_handle_ingress()) doesn't
set a return value and it is left to the old return value of
the caller (__netif_receive_skb_core()) which is RX drop, so if
the packet is consumed, caller will stop and return this value
as if the packet was dropped.
This causes a problem in the kernel tcp stack when having a
egress tc rule forwarding to a ingress tc rule.
The tcp stack sending packets on the device having the egress rule
will see the packets as not successfully transmitted (although they
actually were), will not advance it's internal state of sent data,
and packets returning on such tcp stream will be dropped by the tcp
stack with reason ack-of-unsent-data. See reproduction in [0] below.
Fix that by setting the return value to RX success if
the packet was handled successfully.
[0] Reproduction steps:
$ ip link add veth1 type veth peer name peer1
$ ip link add veth2 type veth peer name peer2
$ ifconfig peer1 5.5.5.6/24 up
$ ip netns add ns0
$ ip link set dev peer2 netns ns0
$ ip netns exec ns0 ifconfig peer2 5.5.5.5/24 up
$ ifconfig veth2 0 up
$ ifconfig veth1 0 up
#ingress forwarding veth1 <-> veth2
$ tc qdisc add dev veth2 ingress
$ tc qdisc add dev veth1 ingress
$ tc filter add dev veth2 ingress prio 1 proto all flower \
action mirred egress redirect dev veth1
$ tc filter add dev veth1 ingress prio 1 proto all flower \
action mirred egress redirect dev veth2
#steal packet from peer1 egress to veth2 ingress, bypassing the veth pipe
$ tc qdisc add dev peer1 clsact
$ tc filter add dev peer1 egress prio 20 proto ip flower \
action mirred ingress redirect dev veth1
#run iperf and see connection not running
$ iperf3 -s&
$ ip netns exec ns0 iperf3 -c 5.5.5.6 -i 1
#delete egress rule, and run again, now should work
$ tc filter del dev peer1 egress
$ ip netns exec ns0 iperf3 -c 5.5.5.6 -i 1
Fixes: f697c3e8b35c ("[NET]: Avoid unnecessary cloning for ingress filtering")
Signed-off-by: Paul Blakey <paulb@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Before creating a new MDB entry, br_multicast_new_group() will call
br_mdb_ip_get() to see if one exists and return it if so.
Therefore, simply call br_multicast_new_group() and omit the call to
br_mdb_ip_get().
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
IGMPv3 / MLDv2 Membership Reports are only processed from the data path
with softIRQ disabled, so there is no need to call spin_lock_bh(). Use
spin_lock() instead.
This is consistent with how other IGMP / MLD packets are processed.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When the default qdisc is sfb, if the qdisc of dev_queue fails to be
inited during mqprio_init(), sfb_reset() is invoked to clear resources.
In this case, the q->qdisc is NULL, and it will cause gpf issue.
The process is as follows:
qdisc_create_dflt()
sfb_init()
tcf_block_get() --->failed, q->qdisc is NULL
...
qdisc_put()
...
sfb_reset()
qdisc_reset(q->qdisc) --->q->qdisc is NULL
ops = qdisc->ops
The following is the Call Trace information:
general protection fault, probably for non-canonical address
0xdffffc0000000003: 0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000018-0x000000000000001f]
RIP: 0010:qdisc_reset+0x2b/0x6f0
Call Trace:
<TASK>
sfb_reset+0x37/0xd0
qdisc_reset+0xed/0x6f0
qdisc_destroy+0x82/0x4c0
qdisc_put+0x9e/0xb0
qdisc_create_dflt+0x2c3/0x4a0
mqprio_init+0xa71/0x1760
qdisc_create+0x3eb/0x1000
tc_modify_qdisc+0x408/0x1720
rtnetlink_rcv_msg+0x38e/0xac0
netlink_rcv_skb+0x12d/0x3a0
netlink_unicast+0x4a2/0x740
netlink_sendmsg+0x826/0xcc0
sock_sendmsg+0xc5/0x100
____sys_sendmsg+0x583/0x690
___sys_sendmsg+0xe8/0x160
__sys_sendmsg+0xbf/0x160
do_syscall_64+0x35/0x80
entry_SYSCALL_64_after_hwframe+0x46/0xb0
RIP: 0033:0x7f2164122d04
</TASK>
Fixes: e13e02a3c68d ("net_sched: SFB flow scheduler")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
fq_codel_init()"
This reverts commit 494f5063b86cd6e972cb41a27e083c9a3664319d.
When the default qdisc is fq_codel, if the qdisc of dev_queue fails to be
inited during mqprio_init(), fq_codel_reset() is invoked to clear
resources. In this case, the flow is NULL, and it will cause gpf issue.
The process is as follows:
qdisc_create_dflt()
fq_codel_init()
...
q->flows_cnt = 1024;
...
q->flows = kvcalloc(...) --->failed, q->flows is NULL
...
qdisc_put()
...
fq_codel_reset()
...
flow = q->flows + i --->q->flows is NULL
The following is the Call Trace information:
general protection fault, probably for non-canonical address
0xdffffc0000000001: 0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f]
RIP: 0010:fq_codel_reset+0x14d/0x350
Call Trace:
<TASK>
qdisc_reset+0xed/0x6f0
qdisc_destroy+0x82/0x4c0
qdisc_put+0x9e/0xb0
qdisc_create_dflt+0x2c3/0x4a0
mqprio_init+0xa71/0x1760
qdisc_create+0x3eb/0x1000
tc_modify_qdisc+0x408/0x1720
rtnetlink_rcv_msg+0x38e/0xac0
netlink_rcv_skb+0x12d/0x3a0
netlink_unicast+0x4a2/0x740
netlink_sendmsg+0x826/0xcc0
sock_sendmsg+0xc5/0x100
____sys_sendmsg+0x583/0x690
___sys_sendmsg+0xe8/0x160
__sys_sendmsg+0xbf/0x160
do_syscall_64+0x35/0x80
entry_SYSCALL_64_after_hwframe+0x46/0xb0
RIP: 0033:0x7fd272b22d04
</TASK>
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When the default qdisc is cake, if the qdisc of dev_queue fails to be
inited during mqprio_init(), cake_reset() is invoked to clear
resources. In this case, the tins is NULL, and it will cause gpf issue.
The process is as follows:
qdisc_create_dflt()
cake_init()
q->tins = kvcalloc(...) --->failed, q->tins is NULL
...
qdisc_put()
...
cake_reset()
...
cake_dequeue_one()
b = &q->tins[...] --->q->tins is NULL
The following is the Call Trace information:
general protection fault, probably for non-canonical address
0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
RIP: 0010:cake_dequeue_one+0xc9/0x3c0
Call Trace:
<TASK>
cake_reset+0xb1/0x140
qdisc_reset+0xed/0x6f0
qdisc_destroy+0x82/0x4c0
qdisc_put+0x9e/0xb0
qdisc_create_dflt+0x2c3/0x4a0
mqprio_init+0xa71/0x1760
qdisc_create+0x3eb/0x1000
tc_modify_qdisc+0x408/0x1720
rtnetlink_rcv_msg+0x38e/0xac0
netlink_rcv_skb+0x12d/0x3a0
netlink_unicast+0x4a2/0x740
netlink_sendmsg+0x826/0xcc0
sock_sendmsg+0xc5/0x100
____sys_sendmsg+0x583/0x690
___sys_sendmsg+0xe8/0x160
__sys_sendmsg+0xbf/0x160
do_syscall_64+0x35/0x80
entry_SYSCALL_64_after_hwframe+0x46/0xb0
RIP: 0033:0x7f89e5122d04
</TASK>
Fixes: 046f6fd5daef ("sched: Add Common Applications Kept Enhanced (cake) qdisc")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Otherwise EINVAL is bogusly reported to userspace when deleting a set
element. NFTA_SET_ELEM_KEY_END does not need to be set in case of:
- insertion: if not present, start key is used as end key.
- deletion: only start key needs to be specified, end key is ignored.
Hence, relax the sanity check.
Fixes: 88cccd908d51 ("netfilter: nf_tables: NFTA_SET_ELEM_KEY_END requires concat and interval flags")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Currently netfilter's rpfilter and fib modules implicitely initialise
->flowic_uid with 0. This is normally the root UID. However, this isn't
the case in user namespaces, where user ID 0 is mapped to a different
kernel UID. By initialising ->flowic_uid with sock_net_uid(), we get
the root UID of the user namespace, thus keeping the same behaviour
whether or not we're running in a user namepspace.
Note, this is similar to commit 8bcfd0925ef1 ("ipv4: add missing
initialization for flowi4_uid"), which fixed the rp_filter sysctl.
Fixes: 622ec2c9d524 ("net: core: add UID to flows, rules, and routes")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
syzbot got a crash [1] in skb_clone(), caused by a bug
in hsr_get_untagged_frame().
When/if create_stripped_skb_hsr() returns NULL, we must
not attempt to call skb_clone().
While we are at it, replace a WARN_ONCE() by netdev_warn_once().
[1]
general protection fault, probably for non-canonical address 0xdffffc000000000f: 0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000078-0x000000000000007f]
CPU: 1 PID: 754 Comm: syz-executor.0 Not tainted 6.0.0-syzkaller-02734-g0326074ff465 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/22/2022
RIP: 0010:skb_clone+0x108/0x3c0 net/core/skbuff.c:1641
Code: 93 02 00 00 49 83 7c 24 28 00 0f 85 e9 00 00 00 e8 5d 4a 29 fa 4c 8d 75 7e 48 b8 00 00 00 00 00 fc ff df 4c 89 f2 48 c1 ea 03 <0f> b6 04 02 4c 89 f2 83 e2 07 38 d0 7f 08 84 c0 0f 85 9e 01 00 00
RSP: 0018:ffffc90003ccf4e0 EFLAGS: 00010207
RAX: dffffc0000000000 RBX: ffffc90003ccf5f8 RCX: ffffc9000c24b000
RDX: 000000000000000f RSI: ffffffff8751cb13 RDI: 0000000000000000
RBP: 0000000000000000 R08: 00000000000000f0 R09: 0000000000000140
R10: fffffbfff181d972 R11: 0000000000000000 R12: ffff888161fc3640
R13: 0000000000000a20 R14: 000000000000007e R15: ffffffff8dc5f620
FS: 00007feb621e4700(0000) GS:ffff8880b9b00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007feb621e3ff8 CR3: 00000001643a9000 CR4: 00000000003506e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
hsr_get_untagged_frame+0x4e/0x610 net/hsr/hsr_forward.c:164
hsr_forward_do net/hsr/hsr_forward.c:461 [inline]
hsr_forward_skb+0xcca/0x1d50 net/hsr/hsr_forward.c:623
hsr_handle_frame+0x588/0x7c0 net/hsr/hsr_slave.c:69
__netif_receive_skb_core+0x9fe/0x38f0 net/core/dev.c:5379
__netif_receive_skb_one_core+0xae/0x180 net/core/dev.c:5483
__netif_receive_skb+0x1f/0x1c0 net/core/dev.c:5599
netif_receive_skb_internal net/core/dev.c:5685 [inline]
netif_receive_skb+0x12f/0x8d0 net/core/dev.c:5744
tun_rx_batched+0x4ab/0x7a0 drivers/net/tun.c:1544
tun_get_user+0x2686/0x3a00 drivers/net/tun.c:1995
tun_chr_write_iter+0xdb/0x200 drivers/net/tun.c:2025
call_write_iter include/linux/fs.h:2187 [inline]
new_sync_write fs/read_write.c:491 [inline]
vfs_write+0x9e9/0xdd0 fs/read_write.c:584
ksys_write+0x127/0x250 fs/read_write.c:637
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Fixes: f266a683a480 ("net/hsr: Better frame dispatch")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20221017165928.2150130-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The function ip6gre_tnl_addr_conflict() is defined in the ip6_gre.c file,
but not called elsewhere, so delete this unused function.
net/ipv6/ip6_gre.c:887:20: warning: unused function 'ip6gre_tnl_addr_conflict'.
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2419
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Link: https://lore.kernel.org/r/20221017093540.26806-1-jiapeng.chong@linux.alibaba.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|