aboutsummaryrefslogtreecommitdiff
path: root/net/mac80211/ieee80211_i.h
AgeCommit message (Collapse)AuthorFilesLines
2012-07-13Revert "mac80211: refactor virtual monitor code"Johannes Berg1-4/+0
This reverts commit 870d37fc22f3e40f9f23e06c581c8538fc16a2f0. This code doesn't work as cfg80211 will call set_monitor_enabled at the wrong time and it doesn't seem to be possible to fix this. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-12mac80211: add time synchronisation with BSS for assocJohannes Berg1-0/+2
Some drivers (iwlegacy, iwlwifi and rt2x00) today use the bss_conf.last_tsf value. By itself though that value is completely worthless since it may be ancient. What really is needed is synchronisation between some device time and the TSF. To clarify this, rename bss_conf.last_tsf to sync_tsf and add sync_device_ts which is obtained from rx_status which gets a new field device_timestamp for this purpose. This is intentionally not using the mactime field since that is used for other things and in IBSS is expected to sync with the IBSS's TSF which isn't necessarily true for the device timestamp. Also, since we have the information and it's useful even before the connection has been established, give all the timing details to the driver before authenticating. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-12mac80211: redesign scan RXJohannes Berg1-5/+1
Scan receive is rather inefficient when there are multiple virtual interfaces. We iterate all of the virtual interfaces and then notify cfg80211 about each beacon many times. Redesign scan RX to happen before everything else. Then we can also get rid of IEEE80211_RX_IN_SCAN since we don't have to accept frames into the RX handlers for scanning or scheduled scanning any more. Overall, this simplifies the code. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-12mac80211: track scheduled scan virtual interfaceJohannes Berg1-1/+1
Instead of tracking whether or not we're in a scheduled scan, track the virtual interface (sdata) in an RCU-protected pointer to make it usable from RX to check the MAC address. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-12mac80211: make scan_sdata pointer usable with RCUJohannes Berg1-1/+1
Making the scan_sdata pointer usable with RCU makes it possible to dereference it in the RX path to see if a received frame actually matches the interface that is scanning. This is just preparations, making the pointer __rcu. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-12cfg80211: use wireless_dev for interface managementJohannes Berg1-1/+1
In order to be able to create P2P Device wdevs, move the virtual interface management over to wireless_dev structures. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-09cfg80211: use wdev in mgmt-tx/ROC APIsJohannes Berg1-0/+6
The management frame and remain-on-channel APIs will be needed in the P2P device abstraction, so move them over to the new wdev-based APIs. Userspace can still use both the interface index and wdev identifier for them so it's backward compatible, but for the P2P Device wdev it will be able to use the wdev identifier only. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-02mac80211: include VHT capability IE in probe requestsMahesh Palivela1-0/+2
Insert the VHT capability IE into probe requests. Signed-off-by: Mahesh Palivela <maheshp@posedge.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-29mac80211: refactor virtual monitor codeMichal Kazior1-0/+4
Use cfg80211 the new .set_monitor_enabled instead of tracking it inside mac80211. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-28mac80211: don't expose ieee80211_add_srates_ie()Johannes Berg1-0/+4
This and ieee80211_add_ext_srates_ie() aren't exported, so can't be used by drivers anyway, but there's also no reason that they should be so make them private to mac80211 and use sdata instead of vif arguments. Acked-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-26mac80211: make __ieee80211_recalc_idle staticJohannes Berg1-1/+0
Since it's not called from any file outside where it's defined, the function can be static if moved up in the file before the callers. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-24mac80211: clean up debuggingJohannes Berg1-0/+1
There are a few things that make the logging and debugging in mac80211 less useful than it should be right now: * a lot of messages should be pr_info, not pr_debug * wholesale use of pr_debug makes it require *both* Kconfig and dynamic configuration * there are still a lot of ifdefs * the style is very inconsistent, sometimes the sdata->name is printed in front Clean up everything, introducing new macros and separating out the station MLME debugging into a new Kconfig symbol. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-20mac80211: Track auth frame registrations on IBSS ifacesWill Hawkins1-0/+1
Track userspace registrations for authentication frames received on an IBSS interface. This field will be used to decide whether or not to send "open system" authentication frames when a new station joins an adhoc network. Signed-off-by: Will Hawkins <hawkinsw@opentechinstitute.org> [redesign the code flow a bit] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-20mac80211: save wmm_acm per sdataYoni Divinsky1-1/+3
Save and configure the wmm_acm per sdata, rather than per hardware. If wmm_acm is saved per hardware when running two interfaces simultaneously on the same hardware one interface's wmm policy will be affected by the other interface. Signed-off-by: Yoni Divinsky <yoni.divinsky@ti.com> Signed-off-by: Luciano Coelho <coelho@ti.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-18mac80211: set only VO as a U-APSD enabled ACArik Nemtsov1-4/+7
Some APs experience problems when working with U-APSD. Decrease the probability of that happening by using legacy mode for all ACs but VO. The AP that caused us troubles was a Cisco 4410N. It ignores our setting, and always treats non-VO ACs as legacy. Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-18mac80211: stop Rx during HW reconfigArik Nemtsov1-0/+3
While HW reconfig is in progress, drop all incoming Rx. This prevents incoming packets from changing the internal state of the driver or calling callbacks of the low level driver while it is in inconsistent state. Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-06mac80211: unify SW/offload remain-on-channelJohannes Berg1-65/+24
Redesign all the off-channel code, getting rid of the generic off-channel work concept, replacing it with a simple remain-on-channel list. This fixes a number of small issues with the ROC implementation: * offloaded remain-on-channel couldn't be queued, now we can queue it as well, if needed * in iwlwifi (the only user) offloaded ROC is mutually exclusive with scanning, use the new queue to handle that case -- I expect that it will later depend on a HW flag The bigger issue though is that there's a bad bug in the current implementation: if we get a mgmt TX request while HW roc is active, and this new request has a wait time, we actually schedule a software ROC instead since we can't guarantee the existing offloaded ROC will still be that long. To fix this, the queuing mechanism was needed. The queuing mechanism for offloaded ROC isn't yet optimal, ideally we should add API to have the HW extend the ROC if needed. We could add that later but for now use a software implementation. Overall, this unifies the behaviour between the offloaded and software-implemented case as much as possible. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-05mac80211: simplify association HT parametersJohannes Berg1-1/+2
Instead of passing around the entire HT information IE, extract only the HT parameters field and disable HT if the HT information IE isn't present and well- formed. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-14Merge branch 'master' of ↵David S. Miller1-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next
2012-05-09mac80211: Convert compare_ether_addr to ether_addr_equalJoe Perches1-1/+1
Use the new bool function ether_addr_equal to add some clarity and reduce the likelihood for misuse of compare_ether_addr for sorting. Done via cocci script: $ cat compare_ether_addr.cocci @@ expression a,b; @@ - !compare_ether_addr(a, b) + ether_addr_equal(a, b) @@ expression a,b; @@ - compare_ether_addr(a, b) + !ether_addr_equal(a, b) @@ expression a,b; @@ - !ether_addr_equal(a, b) == 0 + ether_addr_equal(a, b) @@ expression a,b; @@ - !ether_addr_equal(a, b) != 0 + !ether_addr_equal(a, b) @@ expression a,b; @@ - ether_addr_equal(a, b) == 0 + !ether_addr_equal(a, b) @@ expression a,b; @@ - ether_addr_equal(a, b) != 0 + ether_addr_equal(a, b) @@ expression a,b; @@ - !!ether_addr_equal(a, b) + ether_addr_equal(a, b) Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-08mac80211: Advertise HT protection mode in IEsAshok Nagarajan1-1/+2
Signed-off-by: Ashok Nagarajan <ashok@cozybit.com> Reviewed-by: Thomas Pedersen <thomas@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-1/+1
Conflicts: drivers/net/ethernet/intel/e1000e/param.c drivers/net/wireless/iwlwifi/iwl-agn-rx.c drivers/net/wireless/iwlwifi/iwl-trans-pcie-rx.c drivers/net/wireless/iwlwifi/iwl-trans.h Resolved the iwlwifi conflict with mainline using 3-way diff posted by John Linville and Stephen Rothwell. In 'net' we added a bug fix to make iwlwifi report a more accurate skb->truesize but this conflicted with RX path changes that happened meanwhile in net-next. In e1000e a conflict arose in the validation code for settings of adapter->itr. 'net-next' had more sophisticated logic so that logic was used. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-24mac80211: rename AP variable num_sta_authorized to num_mcast_staFelix Fietkau1-1/+1
It is only used to test for BSS multicast receivers. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-24mac80211: call ieee80211_mgd_stop() on interface stopEliad Peller1-1/+1
ieee80211_mgd_teardown() is called on netdev removal, which occurs after the vif was already removed from the low-level driver, resulting in the following warning: [ 4809.014734] ------------[ cut here ]------------ [ 4809.019861] WARNING: at net/mac80211/driver-ops.h:12 ieee80211_bss_info_change_notify+0x200/0x2c8 [mac80211]() [ 4809.030388] wlan0: Failed check-sdata-in-driver check, flags: 0x4 [ 4809.036862] Modules linked in: wlcore_sdio(-) wl12xx wlcore mac80211 cfg80211 [last unloaded: cfg80211] [ 4809.046849] [<c001bd4c>] (unwind_backtrace+0x0/0x12c) [ 4809.055937] [<c047cf1c>] (dump_stack+0x20/0x24) [ 4809.065385] [<c003e334>] (warn_slowpath_common+0x5c/0x74) [ 4809.075589] [<c003e408>] (warn_slowpath_fmt+0x40/0x48) [ 4809.088291] [<bf033630>] (ieee80211_bss_info_change_notify+0x200/0x2c8 [mac80211]) [ 4809.102844] [<bf067f84>] (ieee80211_destroy_auth_data+0x80/0xa4 [mac80211]) [ 4809.116276] [<bf068004>] (ieee80211_mgd_teardown+0x5c/0x74 [mac80211]) [ 4809.129331] [<bf043f18>] (ieee80211_teardown_sdata+0xb0/0xd8 [mac80211]) [ 4809.141595] [<c03b5e58>] (rollback_registered_many+0x228/0x2f0) [ 4809.153056] [<c03b5f48>] (unregister_netdevice_many+0x28/0x50) [ 4809.165696] [<bf041ea8>] (ieee80211_remove_interfaces+0xb4/0xdc [mac80211]) [ 4809.179151] [<bf032174>] (ieee80211_unregister_hw+0x50/0xf0 [mac80211]) [ 4809.191043] [<bf0bebb4>] (wlcore_remove+0x5c/0x7c [wlcore]) [ 4809.201491] [<c02c6918>] (platform_drv_remove+0x24/0x28) [ 4809.212029] [<c02c4d50>] (__device_release_driver+0x8c/0xcc) [ 4809.222738] [<c02c4e84>] (device_release_driver+0x30/0x3c) [ 4809.233099] [<c02c4258>] (bus_remove_device+0x10c/0x128) [ 4809.242620] [<c02c26f8>] (device_del+0x11c/0x17c) [ 4809.252150] [<c02c6de0>] (platform_device_del+0x28/0x68) [ 4809.263051] [<bf0df49c>] (wl1271_remove+0x3c/0x50 [wlcore_sdio]) [ 4809.273590] [<c03806b0>] (sdio_bus_remove+0x48/0xf8) [ 4809.283754] [<c02c4d50>] (__device_release_driver+0x8c/0xcc) [ 4809.293729] [<c02c4e2c>] (driver_detach+0x9c/0xc4) [ 4809.303163] [<c02c3d7c>] (bus_remove_driver+0xc4/0xf4) [ 4809.312973] [<c02c5a98>] (driver_unregister+0x70/0x7c) [ 4809.323220] [<c03809c4>] (sdio_unregister_driver+0x24/0x2c) [ 4809.334213] [<bf0df458>] (wl1271_exit+0x14/0x1c [wlcore_sdio]) [ 4809.344930] [<c009b1a4>] (sys_delete_module+0x228/0x2a8) [ 4809.354734] ---[ end trace 515290ccf5feb522 ]--- Rename ieee80211_mgd_teardown() to ieee80211_mgd_stop(), and call it on ieee80211_do_stop(). Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-23mac80211: Support on-channel scan option.Ben Greear1-0/+3
This based on an idea posted by Stanislaw Gruszka, though I accept full blame for the implementation! This has been tested with ath9k. The idea is to let users scan on the current operating channel without interrupting normal traffic more than absolutely necessary (changing power level might reset some hardware, for instance). Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-13mac80211: remove ieee80211_rx_bss_getMohammed Shafi Shajakhan1-3/+0
its not used where, while we directly obtain ieee80211_bss's pointer in ibss.c by calling cfg80211_get_bss Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-13mac80211: remove hw.conf.channel usage where possibleMichal Kazior1-1/+1
Removes hw.conf.channel usage from the following functions: * ieee80211_mandatory_rates * ieee80211_sta_get_rates * ieee80211_frame_duration * ieee80211_rts_duration * ieee80211_ctstoself_duration This is in preparation for multi-channel operation. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-13mac80211: do not scan and monitor connection in parallelStanislaw Gruszka1-0/+1
Before we send probes in connection monitoring we check if scan is not pending. But we do that check without locking. Fix that and also do not start scan if connection monitoring is in progress. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-11mac80211: add improved HW queue controlJohannes Berg1-0/+1
mac80211 currently only supports one hardware queue per AC. This is already problematic for off-channel uses since if we go off channel while the BE queue is full and then try to send an off-channel frame the frame will never go out. This will become worse when we support multi-channel since then a queue on one channel might be full, but we have to stop the software queue for all channels. That is obviously not desirable. To address this problem allow drivers to register more hardware queues, and allow them to map them to virtual interfaces. When they stop a hardware queue the corresponding AC software queues on the correct interfaces will be stopped as well. Additionally, there's an off-channel queue to solve that problem and a per-interface after-DTIM beacon queue. This allows drivers to manage software queues closer to how the hardware works. Currently, there's a limit of 16 hardware queues. This may or may not be sufficient, we can adjust it as needed. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-11mac80211: add explicit monitor interface if neededJohannes Berg1-0/+3
The queue mapping redesign that I'm planning to do will break pure injection unless we handle monitor interfaces explicitly. One possible option would be to have the driver tell mac80211 about monitor mode queues etc., but that would duplicate the API since we already need to have queue assignments handled per virtual interface. So in order to solve this, have a virtual monitor interface that is added whenever all active vifs are monitors. We could also use the state of one of the monitor interfaces, but managing that would be complicated, so allocate separate state. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-11mac80211: Modify sta_get_rates to give basic ratesAshok Nagarajan1-1/+1
Signed-off-by: Ashok Nagarajan <ashok@cozybit.com> Signed-off-by: Thomas Pedersen <thomas@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-10mac80211: Implement mesh synchronization frameworkJavier Cardona1-0/+23
This patch adds MBSS extensible synchronization framework (Sec. 13.13.2 of IEEE Std. 802.11-2012). The framework is implemented via an ops table which defines the following functions: rx_bcn_presp() - this is called every time a mesh beacon is received. adjust_tbtt() - this is called immediately before a beacon is about to be transmitted. The default neighbor offset synchronization defined in the standard is implemented. We also provide template functions for vendor specific methods. When neighbor offset synchronization is active (which is the default) mesh neighbors in the same MBSS will track timing offsets to each other and compensate clock drift. In our tests we observed that this mesh synchronization implementation successfully corrected drifts between stations of ~2PPM while introducing a jitter of ~20us. It is also possible to test this framework on mac80211_hwsim simulated phys to see how it behaves under different topologies, over poor links, etc. Signed-off-by: Marco Porsch <marco.porsch@s2005.tu-chemnitz.de> Signed-off-by: Pavel Zubarev <pavel.zubarev@gmail.com> Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-10mac80211: refuse TX queue configuration on non-QoS HWJohannes Berg1-1/+1
Drivers that don't support QoS also don't support setting up their ACs, catch that early. While at it, remove the input check since cfg80211 does it now. Also fix up the restart code to not try to set up the queues in this case. Finally also change the tx_conf array to have IEEE80211_NUM_ACS entries instead of # of queues since that's what it really needs. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-10mac80211: remove queue stop on rate control updateJohannes Berg1-1/+0
We currently stop the queue when changing the rate control between 20/40 MHz in the BSS. This seems to have been necessary when we actually changed the channel, but now that we just update the station it doesn't seem right any more. Remove it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-10mac80211: remove channel type argument from rate_updateJohannes Berg1-5/+0
The channel type argument to the rate_update() callback isn't really the correct way to give the rate control algorithm about the desired RX bandwidth of the peer. Remove this argument, and instead update the STA capabilities with 20/40 appropriately. The SMPS update done by this callback works in the same way, so this makes the callback cleaner. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-10mac80211: set HT channel before associationJohannes Berg1-7/+3
Changing the channel type during operation is confusing to some drivers and will be hard to handle in multi-channel scenarios. Instead of changing the channel, set it to the right HT channel before authenticating/associating and don't change it -- just update the 20/40 MHz restrictions in rate control as needed when changed by the AP. This also fixes a problem that Paul missed in his fix for the "regulatory makes us deaf" issue -- when we couldn't use 40 MHz we still associated saying we were using 40 MHz, which could in similarly broken APs make us never even connect successfully. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-10mac80211: inline ieee80211_add_pending_skbsJohannes Berg1-2/+5
This is a trivial wrapper function, inline it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-09mac80211: optimize aggregation session timeout handlingFelix Fietkau1-1/+2
Calling mod_timer from the rx/tx hotpath is somewhat expensive, and the timeout doesn't need to be so precise. Switch to a different strategy: Schedule the timer initially, store jiffies of all last rx/tx activity which would previously modify the timer, and let the timer re-arm itself after checking the last rx/tx timestamp. Make the session timers deferrable to avoid causing extra wakeups on systems running on battery. This visibly reduces CPU load under high network load on small embedded systems. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-09wireless: rename ht_info to ht_operationJohannes Berg1-7/+6
Since some of the HT code pre-dates 802.11n-2009 some names are wrong. The one that bothers me most is that "HT operation" is called "HT information" in our code and that causes confusion. Rename "HT information" to "HT operation" and also the control_chan field to primary_chan to match the name used in the spec. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Acked-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-15mac80211: make uapsd_* keys per-vifEliad Peller1-14/+14
uapsd_queues and uapsd_max_sp_len are relevant only for managed interfaces, and can be configured differently for each vif. Move them from the local struct to sdata->u.mgd, and update the debugfs functions accordingly. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-13mac80211: Don't let regulatory make us deafPaul Stewart1-0/+3
When regulatory information changes our HT behavior (e.g, when we get a country code from the AP we have just associated with), we should use this information to change the power with which we transmit, and what channels we transmit. Sometimes the channel parameters we derive from regulatory information contradicts the parameters we used in association. For example, we could have associated specifying HT40, but the regulatory rules we apply may forbid HT40 operation. In the situation above, we should reconfigure ourselves to transmit in HT20 only, however it makes no sense for us to disable receive in HT40, since if we associated with these parameters, the AP has every reason to expect we can and will receive packets this way. The code in mac80211 does not have the capability of sending the appropriate action frames to signal a change in HT behaviour so the AP has no clue we can no longer receive frames encoded this way. In some broken AP implementations, this can leave us effectively deaf if the AP never retries in lower HT rates. This change breaks up the channel_type parameter in the ieee80211_enable_ht function into a separate receive and transmit part. It honors the channel flags set by regulatory in order to configure the rate control algorithm, but uses the capability flags to configure the channel on the radio, since these were used in association to set the AP's transmit rate. Signed-off-by: Paul Stewart <pstew@chromium.org> Cc: Sam Leffler <sleffler@chromium.org> Cc: Johannes Berg <johannes@sipsolutions.net> Reviewed-by: Luis R Rodriguez <mcgrof@frijolero.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-12mac80211: simplify wmm check during associationJohannes Berg1-1/+1
Instead of setting assoc_data->wmm_used solely based on the BSS also take into account our own capabilities and later check those. Also rename "wmm_used" and "uapsd_used" to just "wmm" and "uapsd". Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-12mac80211: remove tx_syncJohannes Berg1-1/+0
When the station state callback was added, this was no longer needed in theory. With the iwlwifi changes to remove use of it landing, we can kill the entire tx-sync framework again, RIP. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-07mac80211: Filter duplicate IE idsPaul Stewart1-0/+41
mac80211 is lenient with respect to reception of corrupted beacons. Even if the frame is corrupted as a whole, the available IE elements are still passed back and accepted, sometimes replacing legitimate data. It is unknown to what extent this "feature" is made use of, but it is clear that in some cases, this is detrimental. One such case is reported in http://crosbug.com/26832 where an AP corrupts its beacons but not its probe responses. One approach would be to completely reject frames with invaid data (for example, if the last tag extends beyond the end of the enclosing PDU). The enclosed approach is much more conservative: we simply prevent later IEs from overwriting the state from previous ones. This approach hopes that there might be some salient data in the IE stream before the corruption, and seeks to at least prevent that data from being overwritten. This approach will fix the case above. Further, we flag element structures that contain data we think might be corrupted, so that as we fill the mac80211 BSS structure, we try not to replace data from an un-corrupted probe response with that of a corrupted beacon, for example. Short of any statistics gathering in the various forms of AP breakage, it's not possible to ascertain the side effects of more stringent discarding of data. Signed-off-by: Paul Stewart <pstew@chromium.org> Cc: Sam Leffler <sleffler@chromium.org> Cc: Eliad Peller <eliad@wizery.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-05mac80211: combine QoS with other BSS changesJohannes Berg1-1/+2
When associating and particularly when disassociating there's no need to notify the driver about changes with multiple calls to bss_info_changed, we should combine the QoS enabling/disabling into the same call as otherwise the driver could get confused about QoS suddenly getting disabled while connected. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-05mac80211: use 16 bit alignment for the if_ibss bssid fieldFelix Fietkau1-1/+1
Several MAC address comparison functions assume 16 bit alignment for pointers passed to them. Since the addition of the control_port field, alignment for the IBSS bssid was off by one, causing a severe performance hit on architectures without efficient unaligned access (e.g. MIPS). Signed-off-by: Felix Fietkau <nbd@openwrt.org> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-29cfg80211: remove cookies from callbacksJohannes Berg1-4/+2
In "cfg80211: no cookies in cfg80211_send_XXX()" Holger Schurig removed the cookies in the calls from mac80211 to cfg80211, but the ones in the other direction were left in. Remove them now. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-27mac80211: remove local_to_hwJohannes Berg1-6/+0
That's a lot longer than open-coding it and doesn't really add value, so just remove it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-27mac80211: fix auth/assoc data & timer leakJohannes Berg1-0/+1
When removing an interface while it is in the process of authenticating or associating, we leak the auth_data or assoc_data, and leave the timer pending. The timer then crashes the system when it fires as its data is gone. Fix this by explicitly deleting all the data when the interface is removed. This uncovered another bug -- this problem should have been detected by the sta_info_flush() warning but that function doesn't ever return non-zero, I'll fix that in a separate patch. Reported-by: Hieu Nguyen <hieux.c.nguyen@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-22cfg80211: restructure AP/GO mode APIJohannes Berg1-1/+1
The AP/GO mode API isn't very clearly defined, it has "set beacon" and "new beacon" etc. Modify the API to the following: * start AP -- all settings * change beacon -- new beacon data * stop AP -- stop AP mode operation This also reflects in the nl80211 API, rename the commands there correspondingly (but keep the old names for compatibility.) Overall, this makes it much clearer what's going on in the API. Kalle developed the ath6kl changes, I created the rest of the patch. Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
Powered by cgit, Gruvboxed by Blaster4385.