aboutsummaryrefslogtreecommitdiff
path: root/net/bluetooth/mgmt.c
AgeCommit message (Collapse)AuthorFilesLines
2021-10-29Bluetooth: hci_sync: Convert MGMT_OP_SSPBrian Gix1-78/+72
mgmt-tester paths: Set SSP on - Success 2 Set Device ID - SSP off and Power on Signed-off-by: Brian Gix <brian.gix@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-10-29Bluetooth: hci_sync: Convert adv_expireBrian Gix1-14/+19
mgmt-test paths: Set Advertising on - Appearance 1 Set Advertising on - Local name 1 Set Advertising on - Name + Appear 1 Set Local Name - Success 2 Set Local Name - Success 3 Add Advertising - Success (Empty ScRsp) Add Advertising - Success (ScRsp appear) Add Advertising - Invalid Params (ScRsp appear long) Add Advertising - Success (Complete name) Add Advertising - Success (Shortened name) Add Advertising - Success (Short name) Add Advertising - Success (Name + data) Add Advertising - Invalid Params (Name + data) Add Advertising - Success (Name+data+appear) Set appearance - BR/EDR LE Set appearance - LE only Add Ext Advertising - Success (Empty ScRsp) Add Ext Advertising - Success (ScRsp appear) Add Ext Advertising - Invalid Params (ScRsp appear long) Add Ext Advertising - Success (Complete name) Add Ext Advertising - Success (Shortened name) Add Ext Advertising - Success (Short name) Add Ext Advertising - Success (Name + data) Add Ext Advertising - Invalid Params (Name + data) Add Ext Advertising - Success (Name+data+appear) Signed-off-by: Brian Gix <brian.gix@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-10-29Bluetooth: hci_sync: Convert MGMT_OP_SET_ADVERTISINGBrian Gix1-55/+48
mgmt-test paths: Set powered on - Privacy and Advertising Set Advertising on - Success 2 Set Advertising on - Appearance 1 Set Advertising on - Local name 1 Set Advertising on - Name + Appear 1 Add Advertising - Success 4 Add Advertising - Success 5 Add Ext Advertising - Success 4 Add Ext Advertising - Success 5 Signed-off-by: Brian Gix <brian.gix@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-10-29Bluetooth: hci_sync: Convert MGMT_OP_SET_PHY_CONFIGURATIONBrian Gix1-50/+66
mgmt-test paths: Set PHY 2m Success Set PHY coded Succcess Set PHY 1m 2m coded Succcess Set PHY 2m tx success Set PHY 2m rx success Set PHY Invalid Param Start Discovery - (2m, Scan Param) Start Discovery - (coded, Scan Param) Start Discovery - (1m, 2m, coded, Scan Param) Signed-off-by: Brian Gix <brian.gix@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-10-29Bluetooth: hci_sync: Convert MGMT_OP_SET_LOCAL_NAMEBrian Gix1-33/+32
Uses existing *_sync functions, but made hci_update_name_sync non-static. mgmt-test paths: Set Advertising on - Local name 1 Set Advertising on - Name + Appear 1 Set Local Name - Success 1 Set Local Name - Success 2 Set Local Name - Success 3 Add Advertising - Success (Empty ScRsp) Add Advertising - Success (Complete name) Add Advertising - Success (Shortened name) Add Advertising - Success (Short name) Add Advertising - Success (Name + data) Add Advertising - Invalid Params (Name + data) Add Advertising - Success (Name+data+appear) Read Ext Controller Info 3 Read Ext Controller Info 4 Read Ext Controller Info 5 Add Ext Advertising - Success (Empty ScRsp) Add Ext Advertising - Success (Complete name) Add Ext Advertising - Success (Shortened name) Add Ext Advertising - Success (Short name) Add Ext Advertising - Success (Name + data) Add Ext Advertising - Invalid Params (Name + data) Add Ext Advertising - Success (Name+data+appear) Signed-off-by: Brian Gix <brian.gix@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-10-29Bluetooth: hci_sync: Convert MGMT_OP_READ_LOCAL_OOB_EXT_DATABrian Gix1-17/+20
Uses existing *_sync functions mgmt-test paths: Read Local OOB Ext Data - Invalid index Read Local OOB Ext Data - Legacy pairing Read Local OOB Ext Data - Success SSP Read Local OOB Ext Data - Success SC Signed-off-by: Brian Gix <brian.gix@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-10-29Bluetooth: hci_sync: Convert MGMT_OP_READ_LOCAL_OOB_DATABrian Gix1-26/+46
New functions: hci_read_local_oob_data_sync This function requires all of the data from the cmd cmplt event to be passed up to the caller via the skb. mgmt-tester paths: Read Local OOB Data - Not powered Read Local OOB Data - Legacy pairing Read Local OOB Data - Success SSP Read Local OOB Data - Success SC Signed-off-by: Brian Gix <brian.gix@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-10-29Bluetooth: hci_sync: Convert MGMT_OP_SET_LEBrian Gix1-42/+43
Uses: hci_disable_advertising_sync hci_remove_ext_adv_instance_sync hci_write_le_host_supported_sync hci_setup_ext_adv_instance_sync hci_update_scan_rsp_data_sync Signed-off-by: Brian Gix <brian.gix@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-10-29Bluetooth: hci_sync: Convert MGMT_OP_GET_CLOCK_INFOBrian Gix1-70/+51
Synchronous version of MGMT_OP_GET_CLOCK_INFO. Signed-off-by: Brian Gix <brian.gix@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-10-29Bluetooth: hci_sync: Convert MGMT_OP_SET_SECURE_CONNBrian Gix1-34/+32
Synchronous version of MGMT_OP_SET_SECURE_CONN. Signed-off-by: Brian Gix <brian.gix@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-10-29Bluetooth: hci_sync: Convert MGMT_OP_GET_CONN_INFOBrian Gix1-90/+58
Synchronous version of MGMT_OP_GET_CONN_INFO Implements: hci_read_rssi_sync hci_read_tx_power_sync Signed-off-by: Brian Gix <brian.gix@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-10-29Bluetooth: hci_sync: Enable synch'd set_bredrBrian Gix1-37/+35
Uses previously written: hci_write_fast_connectable_sync hci_update_scan_sync hci_update_adv_data_sync Signed-off-by: Brian Gix <brian.gix@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-10-29Bluetooth: hci_sync: Convert MGMT_OP_SET_FAST_CONNECTABLEBrian Gix1-40/+30
This creates a synchronized Write Fast Connectable call and attaches it to the MGMT_OP_SET_FAST_CONNECTABLE management opcode. Signed-off-by: Brian Gix <brian.gix@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-10-29Bluetooth: hci_sync: Convert MGMT_OP_START_DISCOVERYLuiz Augusto von Dentz1-30/+75
This make use of hci_cmd_sync_queue for MGMT_OP_START_DISCOVERY, MGMT_OP_START_SERVICE_DISCOVERY and MGMT_OP_STOP_DISCOVERY to use hci_cmd_sync_queue so they no longer depend on hdev->discov_update work to send any commands. Tested with: tools/mgmt-tester -s "Start Discovery" Test Summary ------------ Start Discovery - Not powered 1 Passed Start Discovery - Invalid parameters 1 Passed Start Discovery - Not supported 1 Passed Start Discovery - Success 1 Passed Start Discovery - Success 2 Passed Start Discovery - Power Off 1 Passed Start Discovery BREDR LE - (Ext Scan Enable) Passed Start Discovery LE - (Ext Scan Enable) Passed Start Discovery LE - (Ext Scan Param) Passed Start Discovery - (2m, Scan Param) Passed Start Discovery - (coded, Scan Param) Passed Start Discovery - (1m, 2m, coded, Scan Param) Passed LL Privacy - Start Discovery 1 (Disable RL) Passed LL Privacy - Start Discovery 2 (Disable RL) Passed Total: 14, Passed: 14 (100.0%), Failed: 0, Not Run: 0 tools/mgmt-tester -s "Start Service" Test Summary ------------ Start Service Discovery - Not powered 1 Passed Start Service Discovery - Invalid parameters 1 Passed Start Service Discovery - Not supported 1 Passed Start Service Discovery - Success 1 Passed Start Service Discovery - Success 2 Passed Total: 5, Passed: 5 (100.0%), Failed: 0, Not Run: 0 tools/mgmt-tester -s "Stop Discovery" Test Summary ------------ Stop Discovery - Success 1 Passed Stop Discovery - BR/EDR (Inquiry) Success 1 Passed Stop Discovery - Rejected 1 Passed Stop Discovery - Invalid parameters 1 Passed Stop Discovery - (Ext Scan Disable) Passed Total: 5, Passed: 5 (100.0%), Failed: 0, Not Run: 0 Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-10-29Bluetooth: hci_sync: Convert MGMT_SET_POWEREDLuiz Augusto von Dentz1-82/+63
This make use of hci_cmd_sync_queue when MGMT_SET_POWERED is used so all commands are run within hdev->cmd_sync_work instead of hdev->power_on_work and hdev->power_off_work. In addition to that the power on sequence now takes into account if local IRK needs to be programmed in the resolving list. Tested with: tools/mgmt-tester -s "Set powered" Test Summary ------------ Set powered on - Success Passed Set powered on - Invalid parameters 1 Passed Set powered on - Invalid parameters 2 Passed Set powered on - Invalid parameters 3 Passed Set powered on - Invalid index Passed Set powered on - Privacy and Advertising Passed Set powered off - Success Passed Set powered off - Class of Device Passed Set powered off - Invalid parameters 1 Passed Set powered off - Invalid parameters 2 Passed Set powered off - Invalid parameters 3 Passed Total: 11, Passed: 11 (100.0%), Failed: 0, Not Run: 0 Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-10-29Bluetooth: hci_sync: Rework background scanLuiz Augusto von Dentz1-4/+4
This replaces the use of hci_update_background_scan with hci_update_passive_scan which runs from cmd_work_sync and deal properly with resolving list when LL privacy is enabled. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-10-29Bluetooth: hci_sync: Enable advertising when LL privacy is enabledLuiz Augusto von Dentz1-36/+3
This enables advertising when LL privacy is enabled and changes the command sequence when resolving list is updated to also account for when advertising is enabled using the following sequence: If there are devices to scan: Disable Scanning -> Update Accept List -> use_ll_privacy((Disable Advertising) -> Disable Resolving List -> Update Resolving List -> Enable Resolving List -> (Enable Advertising)) -> Enable Scanning Otherwise: Disable Scanning Errors during the Update Accept List stage are handled gracefully by restoring any previous state (e.g. advertising) and disabling the use of accept list as either accept list or resolving list could not be updated. Tested with: mgmt-tester -s "LL Privacy" Test Summary ------------ LL Privacy - Add Device 1 (Add to WL) Passed LL Privacy - Add Device 2 (Add to RL) Passed LL Privacy - Add Device 3 (Enable RL) Passed LL Privacy - Add Device 4 (2 Devices to WL) Passed LL Privacy - Add Device 5 (2 Devices to RL) Passed LL Privacy - Add Device 6 (RL is full) Passed LL Privacy - Add Device 7 (WL is full) Passed LL Privacy - Add Device 8 (Disable Adv) Passed LL Privacy - Add Device 9 (Multi Adv) Passed LL Privacy - Add Device 10 (Multi Dev and Multi Adv) Passed LL Privacy - Remove Device 1 (Remove from WL) Passed LL Privacy - Remove Device 2 (Remove from RL) Passed LL Privacy - Remove Device 3 (Disable RL) Passed LL Privacy - Remove Device 4 (Disable Adv) Passed LL Privacy - Remove Device 5 (Multi Adv) Passed LL Privacy - Start Discovery 1 (Disable RL) Passed LL Privacy - Start Discovery 2 (Disable RL) Passed Total: 18, Passed: 18 (100.0%), Failed: 0, Not Run: 0 Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-10-29Bluetooth: hci_sync: Make use of hci_cmd_sync_queue set 3Luiz Augusto von Dentz1-4/+15
This make use of hci_cmd_sync_queue for the following MGMT commands: Add Device Remove Device Tested with: mgmt-tester -s "Add Device" Test Summary ------------ Add Device - Invalid Params 1 Passed Add Device - Invalid Params 2 Passed Add Device - Invalid Params 3 Passed Add Device - Invalid Params 4 Passed Add Device - Success 1 Passed Add Device - Success 2 Passed Add Device - Success 3 Passed Add Device - Success 4 Passed Add Device - Success 5 Passed Add Device - Success 6 - Add to whitelist Passed Add Device - Success 7 - Add to resolv list Passed Add Device - Success 8 - Enable resolv list Passed Total: 12, Passed: 12 (100.0%), Failed: 0, Not Run: 0 Overall execution time: 0.209 seconds mgmt-tester -s "Remove Device" Test Summary ------------ Remove Device - Invalid Params 1 Passed Remove Device - Invalid Params 2 Passed Remove Device - Invalid Params 3 Passed Remove Device - Success 1 Passed Remove Device - Success 2 Passed Remove Device - Success 3 Passed Remove Device - Success 4 Passed Remove Device - Success 5 Passed Remove Device - Success 6 - All Devices Passed Remove Device - Success 7 - Remove from whitelist Passed Remove Device - Success 8 - Remove from resolv list Passed Total: 11, Passed: 11 (100.0%), Failed: 0, Not Run: 0 Overall execution time: 4.26 seconds Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-10-29Bluetooth: hci_sync: Make use of hci_cmd_sync_queue set 2Luiz Augusto von Dentz1-202/+189
This make use of hci_cmd_sync_queue for the following MGMT commands: Add Advertising Remove Advertising Add Extended Advertising Parameters Add Extended Advertising Data mgmt-tester -s "Add Advertising" Test Summary ------------ Add Advertising - Failure: LE off Passed Add Advertising - Invalid Params 1 (AD too long) Passed Add Advertising - Invalid Params 2 (Malformed len) Passed Add Advertising - Invalid Params 3 (Malformed len) Passed Add Advertising - Invalid Params 4 (Malformed len) Passed Add Advertising - Invalid Params 5 (AD too long) Passed Add Advertising - Invalid Params 6 (ScRsp too long) Passed Add Advertising - Invalid Params 7 (Malformed len) Passed Add Advertising - Invalid Params 8 (Malformed len) Passed Add Advertising - Invalid Params 9 (Malformed len) Passed Add Advertising - Invalid Params 10 (ScRsp too long) Passed Add Advertising - Rejected (Timeout, !Powered) Passed Add Advertising - Success 1 (Powered, Add Adv Inst) Passed Add Advertising - Success 2 (!Powered, Add Adv Inst) Passed Add Advertising - Success 3 (!Powered, Adv Enable) Passed Add Advertising - Success 4 (Set Adv on override) Passed Add Advertising - Success 5 (Set Adv off override) Passed Add Advertising - Success 6 (Scan Rsp Dta, Adv ok) Passed Add Advertising - Success 7 (Scan Rsp Dta, Scan ok) Passed Add Advertising - Success 8 (Connectable Flag) Passed Add Advertising - Success 9 (General Discov Flag) Passed Add Advertising - Success 10 (Limited Discov Flag) Passed Add Advertising - Success 11 (Managed Flags) Passed Add Advertising - Success 12 (TX Power Flag) Passed Add Advertising - Success 13 (ADV_SCAN_IND) Passed Add Advertising - Success 14 (ADV_NONCONN_IND) Passed Add Advertising - Success 15 (ADV_IND) Passed Add Advertising - Success 16 (Connectable -> on) Passed Add Advertising - Success 17 (Connectable -> off) Passed Add Advertising - Success 18 (Power -> off, Remove) Passed Add Advertising - Success 19 (Power -> off, Keep) Passed Add Advertising - Success 20 (Add Adv override) Passed Add Advertising - Success 21 (Timeout expires) Passed Add Advertising - Success 22 (LE -> off, Remove) Passed Add Advertising - Success (Empty ScRsp) Passed Add Advertising - Success (ScRsp only) Passed Add Advertising - Invalid Params (ScRsp too long) Passed Add Advertising - Success (ScRsp appear) Passed Add Advertising - Invalid Params (ScRsp appear long) Passed Add Advertising - Success (Appear is null) Passed Add Advertising - Success (Name is null) Passed Add Advertising - Success (Complete name) Passed Add Advertising - Success (Shortened name) Passed Add Advertising - Success (Short name) Passed Add Advertising - Success (Name + data) Passed Add Advertising - Invalid Params (Name + data) Passed Add Advertising - Success (Name+data+appear) Passed Total: 47, Passed: 47 (100.0%), Failed: 0, Not Run: 0 Overall execution time: 2.17 seconds mgmt-tester -s "Remove Advertising" Test Summary ------------ Remove Advertising - Invalid Params 1 Passed Remove Advertising - Success 1 Passed Remove Advertising - Success 2 Passed Total: 3, Passed: 3 (100.0%), Failed: 0, Not Run: 0 Overall execution time: 0.0585 seconds mgmt-tester -s "Ext Adv MGMT Params" Test Summary: ------------ Ext Adv MGMT Params - Unpowered Passed Ext Adv MGMT Params - Invalid parameters Passed Ext Adv MGMT Params - Success Passed Ext Adv MGMT Params - (5.0) Success Passed Total: 4, Passed: 4 (100.0%), Failed: 0, Not Run: 0 Overall execution time: 0.0746 seconds mgmt-tester -s "Ext Adv MGMT -" Test Summary ------------ Ext Adv MGMT - Data set without Params Passed Ext Adv MGMT - AD Data (5.0) Invalid parameters Passed Ext Adv MGMT - AD Data (5.0) Success Passed Ext Adv MGMT - AD Scan Response (5.0) Success Passed Total: 4, Passed: 4 (100.0%), Failed: 0, Not Run: 0 Overall execution time: 0.0805 seconds Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-10-29Bluetooth: hci_sync: Make use of hci_cmd_sync_queue set 1Luiz Augusto von Dentz1-99/+93
This make use of hci_cmd_sync_queue for the following MGMT commands: Set Device Class Set Device ID Add UUID Remove UUID tools/mgmt-tester -s "Set Device Class" Test Summary ------------ Set Device Class - Success 1 Passed Set Device Class - Success 2 Passed Set Device Class - Invalid parameters 1 Passed Total: 3, Passed: 3 (100.0%), Failed: 0, Not Run: 0 Overall execution time: 0.0599 seconds tools/mgmt-tester -s "Set Device ID" Test Summary ------------ Set Device ID - Success 1 Passed Set Device ID - Success 2 Passed Set Device ID - Disable Passed Set Device ID - Power off and Power on Passed Set Device ID - SSP off and Power on Passed Set Device ID - Invalid Parameter Passed Total: 6, Passed: 6 (100.0%), Failed: 0, Not Run: 0 Overall execution time: 0.107 seconds tools/mgmt-tester -s "Add UUID" Test Summary ------------ Add UUID - UUID-16 1 Passed Add UUID - UUID-16 multiple 1 Passed Add UUID - UUID-16 partial 1 Passed Add UUID - UUID-32 1 Passed Add UUID - UUID-32 multiple 1 Passed Add UUID - UUID-32 partial 1 Passed Add UUID - UUID-128 1 Passed Add UUID - UUID-128 multiple 1 Passed Add UUID - UUID-128 partial 1 Passed Add UUID - UUID mix Passed Total: 10, Passed: 10 (100.0%), Failed: 0, Not Run: 0 Overall execution time: 0.198 seconds tools/mgmt-tester -s "Remove UUID" Test Summary ------------ Remove UUID - Success 1 Passed Remove UUID - All UUID - Success 2 Passed Remove UUID - Power Off - Success 3 Passed Remove UUID - Power Off and On - Success 4 Passed Remove UUID - Not Exist - Invalid Params 1 Passed Total: 5, Passed: 5 (100.0%), Failed: 0, Not Run: 0 Overall execution time: 0.0908 seconds Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-10-07Bluetooth: mgmt: Fix Experimental Feature Changed eventTedd Ho-Jeong An1-6/+9
This patch fixes the controller index in the Experimental Features Changed event for the offload_codec and the quality_report features to use the actual hdev index instead of non-controller index(0xffff) so the client can receive the event and know which controller the event is for. Fixes: ad93315183285 ("Bluetooth: Add offload feature under experimental flag") Fixes: ae7d925b5c043 ("Bluetooth: Support the quality report events") Signed-off-by: Tedd Ho-Jeong An <tedd.an@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-09-28Bluetooth: Fix handling of experimental feature for codec offloadMarcel Holtmann1-13/+4
The existence of the experimental feature identifiy is the indication that it is supported or not. No extra flag needed and the initial flag should define if a feature is enabled or not. This is actually defined in the management API definition. Fixes: ad93315183285 ("Bluetooth: Add offload feature under experimental flag") Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2021-09-28Bluetooth: Fix handling of experimental feature for quality reportsMarcel Holtmann1-11/+4
The existence of the experimental feature identifiy is the indication that it is supported or not. No extra flag needed and the initial flag should define if a feature is enabled or not. This is actually defined in the management API definition. Fixes: ae7d925b5c043 ("Bluetooth: Support the quality report events") Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2021-09-28Bluetooth: Fix wrong opcode when LL privacy enabledYun-Hao Chung1-1/+1
The returned opcode of command status of remove_adv is wrong when LL privacy is enabled. Signed-off-by: Yun-Hao Chung <howardchung@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-09-21Bluetooth: eir: Move EIR/Adv Data functions to its own fileLuiz Augusto von Dentz1-1/+2
This moves functions manipulating EIR/Adv Data to its own file so it can be reused by other files. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-09-07Bluetooth: Add offload feature under experimental flagKiran K1-1/+99
Allow user level process to enable / disable codec offload feature through mgmt interface. By default offload codec feature is disabled. Signed-off-by: Kiran K <kiran.k@intel.com> Reviewed-by: Chethan T N <chethan.tumkur.narayan@intel.com> Reviewed-by: Srivatsa Ravishankar <ravishankar.srivatsa@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2021-08-30Bluetooth: Support the quality report eventsJoseph Hwang1-1/+108
This patch allows a user space process to enable/disable the quality report events dynamically through the set experimental feature mgmt interface. Since the quality report feature needs to invoke the callback function provided by the driver, i.e., hdev->set_quality_report, a valid controller index is required. Reviewed-by: Miao-chen Chou <mcchou@chromium.org> Signed-off-by: Joseph Hwang <josephsih@chromium.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2021-08-30Bluetooth: refactor set_exp_feature with a feature tableJoseph Hwang1-106/+142
This patch refactors the set_exp_feature with a feature table consisting of UUIDs and the corresponding callback functions. In this way, a new experimental feature setting function can be simply added with its UUID and callback function. Signed-off-by: Joseph Hwang <josephsih@chromium.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2021-08-30Bluetooth: mgmt: Disallow legacy MGMT_OP_READ_LOCAL_OOB_EXT_DATABrian Gix1-0/+5
Legacy (v2.0) controllers do not support Extended OOB Data used by SSP. Signed-off-by: Brian Gix <brian.gix@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2021-08-19Bluetooth: mgmt: Pessimize compile-time bounds-checkKees Cook1-1/+1
After gaining __alloc_size hints, GCC thinks it can reach a memcpy() with eir_len == 0 (since it can't see into the rewrite of status). Instead, check eir_len == 0, avoiding this future warning: In function 'eir_append_data', inlined from 'read_local_oob_ext_data_complete' at net/bluetooth/mgmt.c:7210:12: ./include/linux/fortify-string.h:54:29: warning: '__builtin_memcpy' offset 5 is out of the bounds [0, 3] [-Warray-bounds] ... net/bluetooth/hci_request.h:133:2: note: in expansion of macro 'memcpy' 133 | memcpy(&eir[eir_len], data, data_len); | ^~~~~~ Cc: Marcel Holtmann <marcel@holtmann.org> Cc: Johan Hedberg <johan.hedberg@gmail.com> Cc: Luiz Augusto von Dentz <luiz.dentz@gmail.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: linux-bluetooth@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-07-28Bluetooth: mgmt: Fix wrong opcode in the response for add_adv cmdTedd Ho-Jeong An1-1/+1
This patch fixes the MGMT add_advertising command repsones with the wrong opcode when it is trying to return the not supported error. Fixes: cbbdfa6f33198 ("Bluetooth: Enable controller RPA resolution using Experimental feature") Signed-off-by: Tedd Ho-Jeong An <tedd.an@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2021-06-26Bluetooth: Increment management interface revisionMarcel Holtmann1-1/+1
Increment the mgmt revision due to recent changes. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2021-06-26Bluetooth: use inclusive language when filtering devicesArchie Pusaka1-7/+7
This patch replaces some non-inclusive terms based on the appropriate language mapping table compiled by the Bluetooth SIG: https://specificationrefs.bluetooth.com/language-mapping/Appropriate_Language_Mapping_Table.pdf Specifically, these terms are replaced: blacklist -> reject list whitelist -> accept list Signed-off-by: Archie Pusaka <apusaka@chromium.org> Reviewed-by: Miao-chen Chou <mcchou@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-06-26Bluetooth: mgmt: Use the correct print formatKai Ye1-8/+8
According to Documentation/core-api/printk-formats.rst, Use the correct print format. Printing an unsigned int value should use %u instead of %d. Otherwise printk() might end up displaying negative numbers. Signed-off-by: Kai Ye <yekai13@huawei.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-06-26Bluetooth: use inclusive language in commentsArchie Pusaka1-1/+1
This patch replaces some non-inclusive terms based on the appropriate language mapping table compiled by the Bluetooth SIG: https://specificationrefs.bluetooth.com/language-mapping/Appropriate_Language_Mapping_Table.pdf Specifically, these terms are replaced: slave -> peripheral blacklisted -> blocked Signed-off-by: Archie Pusaka <apusaka@chromium.org> Reviewed-by: Miao-chen Chou <mcchou@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-06-26Bluetooth: use inclusive language in SMPArchie Pusaka1-5/+5
This patch replaces some non-inclusive terms based on the appropriate language mapping table compiled by the Bluetooth SIG: https://specificationrefs.bluetooth.com/language-mapping/Appropriate_Language_Mapping_Table.pdf Specifically, these terms are replaced: master -> initiator slave -> responder Signed-off-by: Archie Pusaka <apusaka@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-06-26Bluetooth: mgmt: Fix slab-out-of-bounds in tlv_data_is_validLuiz Augusto von Dentz1-0/+3
This fixes parsing of LTV entries when the length is 0. Found with: tools/mgmt-tester -s "Add Advertising - Success (ScRsp only)" Add Advertising - Success (ScRsp only) - run Sending Add Advertising (0x003e) Test condition added, total 1 [ 11.004577] ================================================================== [ 11.005292] BUG: KASAN: slab-out-of-bounds in tlv_data_is_valid+0x87/0xe0 [ 11.005984] Read of size 1 at addr ffff888002c695b0 by task mgmt-tester/87 [ 11.006711] [ 11.007176] [ 11.007429] Allocated by task 87: [ 11.008151] [ 11.008438] The buggy address belongs to the object at ffff888002c69580 [ 11.008438] which belongs to the cache kmalloc-64 of size 64 [ 11.010526] The buggy address is located 48 bytes inside of [ 11.010526] 64-byte region [ffff888002c69580, ffff888002c695c0) [ 11.012423] The buggy address belongs to the page: [ 11.013291] [ 11.013544] Memory state around the buggy address: [ 11.014359] ffff888002c69480: fa fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc [ 11.015453] ffff888002c69500: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc [ 11.016232] >ffff888002c69580: 00 00 00 00 00 00 fc fc fc fc fc fc fc fc fc fc [ 11.017010] ^ [ 11.017547] ffff888002c69600: 00 00 00 00 00 00 fc fc fc fc fc fc fc fc fc fc [ 11.018296] ffff888002c69680: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc [ 11.019116] ================================================================== Fixes: 2bb36870e8cb2 ("Bluetooth: Unify advertising instance flags check") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-06-26Bluetooth: mgmt: Fix the command returns garbage parameter valueTedd Ho-Jeong An1-0/+2
When the Get Device Flags command fails, it returns the error status with the parameters filled with the garbage values. Although the parameters are not used, it is better to fill with zero than the random values. Signed-off-by: Tedd Ho-Jeong An <tedd.an@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-06-26Bluetooth: Fix the HCI to MGMT status conversion tableYu Liu1-0/+3
0x2B, 0x31 and 0x33 are reserved for future use but were not present in the HCI to MGMT conversion table, this caused the conversion to be incorrect for the HCI status code greater than 0x2A. Reviewed-by: Miao-chen Chou <mcchou@chromium.org> Signed-off-by: Yu Liu <yudiliu@google.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-06-26Bluetooth: Return whether a connection is outboundYu Liu1-1/+5
When an MGMT_EV_DEVICE_CONNECTED event is reported back to the user space we will set the flags to tell if the established connection is outbound or not. This is useful for the user space to log better metrics and error messages. Reviewed-by: Miao-chen Chou <mcchou@chromium.org> Reviewed-by: Alain Michaud <alainm@chromium.org> Signed-off-by: Yu Liu <yudiliu@google.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-06-02Bluetooth: Fix spelling mistakesZheng Yongjun1-1/+1
Fix some spelling mistakes in comments: udpate ==> update retreive ==> retrieve accidentially ==> accidentally correspondig ==> corresponding adddress ==> address estabilish ==> establish commplete ==> complete Unkown ==> Unknown triggerd ==> triggered transtion ==> transition Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-08Bluetooth: Allow Microsoft extension to indicate curve validationMarcel Holtmann1-1/+4
Some controllers don't support the Simple Pairing Options feature that can indicate the support for P-192 and P-256 public key validation. However they might support the Microsoft vendor extension that can indicate the validiation capability as well. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2021-04-06Bluetooth: Do not set cur_adv_instance in adv param MGMT requestDaniel Winkler1-1/+0
We set hdev->cur_adv_instance in the adv param MGMT request to allow the callback to the hci param request to set the tx power to the correct instance. Now that the callbacks use the advertising handle from the hci request (as they should), this workaround is no longer necessary. Furthermore, this change resolves a race condition that is more prevalent when using the extended advertising MGMT calls - if hdev->cur_adv_instance is set in the params request, then when the data request is called, we believe our new instance is already active. This treats it as an update and immediately schedules the instance with the controller, which has a potential race with the software rotation adv update. By not setting hdev->cur_adv_instance too early, the new instance is queued as it should be, to be used when the rotation comes around again. This change is tested on harrison peak to confirm that it resolves the race condition on registration, and that there is no regression in single- and multi-advertising automated tests. Reviewed-by: Miao-chen Chou <mcchou@chromium.org> Signed-off-by: Daniel Winkler <danielwinkler@google.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-03-26Bluetooth: Increment management interface revisionMarcel Holtmann1-1/+1
Increment the mgmt revision due to recent changes. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2021-03-26Bluetooth: Move the advertisement monitor events to correct listMarcel Holtmann1-2/+2
The list of trusted events should contain the advertisement monitor events and not the untrusted one, so move entries to the correct list. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2021-03-26Bluetooth: Add missing entries for PHY configuration commandsMarcel Holtmann1-0/+2
The list of supported mgmt commands for PHY configuration is missing, so just add them. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2021-03-26Bluetooth: Fix wrong opcode error for read advertising featuresMarcel Holtmann1-1/+1
The read advertising features error handling returns false the opcode for the set advertising command. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2021-03-26Bluetooth: Fix mgmt status for LL Privacy experimental featureMarcel Holtmann1-1/+1
The return error when trying to change the setting when a controller is powered up, shall be MGMT_STATUS_REJECTED. However instead now the error MGMT_STATUS_NOT_POWERED is used which is exactly the opposite. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2021-03-03Bluetooth: Allow scannable adv with extended MGMT APIsDaniel Winkler1-0/+1
An issue was found, where if a bluetooth client requests a broadcast advertisement with scan response data, it will not be properly registered with the controller. This is because at the time that the hci_cp_le_set_scan_param structure is created, the scan response will not yet have been received since it comes in a second MGMT call. With empty scan response, the request defaults to a non-scannable PDU type. On some controllers, the subsequent scan response request will fail due to incorrect PDU type, and others will succeed and not use the scan response. This fix allows the advertising parameters MGMT call to include a flag to let the kernel know whether a scan response will be coming, so that the correct PDU type is used in the first place. A bluetoothd change is also incoming to take advantage of it. To test this, I created a broadcast advertisement with scan response data and registered it on the hatch chromebook. Without this change, the request fails, and with it will succeed. Reviewed-by: Alain Michaud <alainm@chromium.org> Reviewed-by: Sonny Sasaka <sonnysasaka@chromium.org> Reviewed-by: Miao-chen Chou <mcchou@chromium.org> Signed-off-by: Daniel Winkler <danielwinkler@google.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-02-03Bluetooth: Fix crash in mgmt_add_adv_patterns_monitor_completeHoward Chung1-1/+1
If hci_add_adv_monitor is a pending command(e.g. forward to msft_add_monitor_pattern), it is possible that mgmt_add_adv_patterns_monitor_complete gets called before cmd->user_data gets set, which will cause a crash when we try to get the moniter handle through cmd->user_data in mgmt_add_adv_patterns_monitor_complete. This moves the cmd->user_data assignment earlier than hci_add_adv_monitor. RIP: 0010:mgmt_add_adv_patterns_monitor_complete+0x82/0x187 [bluetooth] Code: 1e bf 03 00 00 00 be 52 00 00 00 4c 89 ea e8 9e e4 02 00 49 89 c6 48 85 c0 0f 84 06 01 00 00 48 89 5d b8 4c 89 fb 4d 8b 7e 30 <41> 0f b7 47 18 66 89 45 c0 45 84 e4 75 5a 4d 8b 56 28 48 8d 4d c8 RSP: 0018:ffffae81807dbcb8 EFLAGS: 00010286 RAX: ffff91c4bdf723c0 RBX: 0000000000000000 RCX: ffff91c4e5da5b80 RDX: ffff91c405680000 RSI: 0000000000000052 RDI: ffff91c49d654c00 RBP: ffffae81807dbd00 R08: ffff91c49fb157e0 R09: ffff91c49fb157e0 R10: 000000000002a4f0 R11: ffffffffc0819cfd R12: 0000000000000000 R13: ffff91c405680000 R14: ffff91c4bdf723c0 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff91c4ea300000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000018 CR3: 0000000133612002 CR4: 00000000003606e0 Call Trace: ? msft_le_monitor_advertisement_cb+0x111/0x141 [bluetooth] hci_event_packet+0x425e/0x631c [bluetooth] ? printk+0x59/0x73 ? __switch_to_asm+0x41/0x70 ? msft_le_set_advertisement_filter_enable_cb+0xa6/0xa6 [bluetooth] ? bt_dbg+0xb4/0xbb [bluetooth] ? __switch_to_asm+0x41/0x70 hci_rx_work+0x101/0x319 [bluetooth] process_one_work+0x257/0x506 worker_thread+0x10d/0x284 kthread+0x14c/0x154 ? process_one_work+0x506/0x506 ? kthread_blkcg+0x2c/0x2c ret_from_fork+0x1f/0x40 Reviewed-by: Miao-chen Chou <mcchou@chromium.org> Reviewed-by: Manish Mandlik <mmandlik@chromium.org> Reviewed-by: Archie Pusaka <apusaka@chromium.org> Signed-off-by: Howard Chung <howardchung@google.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Powered by cgit, Gruvboxed by Blaster4385.