| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
This exported fn is unused, and will not be needed. Lets dump it.
The export was added to let drm control pr_debugs, as part of using
them to avoid drm_debug_enabled overheads. But its better to just
implement the drm.debug bitmap interface, then its available for
everyone.
Fixes: a2d375eda771 ("dyndbg: refine export, rename to dynamic_debug_exec_queries()")
Fixes: 4c0d77828d4f ("dyndbg: export ddebug_exec_queries")
Acked-by: Jason Baron <[email protected]>
Acked-by: Daniel Vetter <[email protected]>
Signed-off-by: Jim Cromie <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Provide a simple module to allow testing DYNAMIC_DEBUG behavior. It
calls do_prints() from module-init, and with a sysfs-node.
dmesg -C
dmesg -w &
modprobe test_dynamic_debug dyndbg=+p
echo 1 > /sys/module/dynamic_debug/parameters/verbose
cat /sys/module/test_dynamic_debug/parameters/do_prints
echo module test_dynamic_debug +mftl > /proc/dynamic_debug/control
echo junk > /sys/module/test_dynamic_debug/parameters/do_prints
Acked-by: Jason Baron <[email protected]>
Acked-by: Daniel Vetter <[email protected]>
Signed-off-by: Jim Cromie <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
dyndbg's control-parser: ddebug_parse_query(), requires that search
terms: module, func, file, lineno, are used only once in a query; a
thing cannot be named both foo and bar.
The cited commit added an overriding module modname, taken from the
module loader, which is authoritative. So it set query.module 1st,
which disallowed its use in the query-string.
But now, its useful to allow a module-load to enable classes across a
whole (or part of) a subsystem at once.
# enable (dynamic-debug in) drm only
modprobe drm dyndbg="class DRM_UT_CORE +p"
# get drm_helper too
modprobe drm dyndbg="class DRM_UT_CORE module drm* +p"
# get everything that knows DRM_UT_CORE
modprobe drm dyndbg="class DRM_UT_CORE module * +p"
# also for boot-args:
drm.dyndbg="class DRM_UT_CORE module * +p"
So convert the override into a default, by filling it only when/after
the query-string omitted the module.
NB: the query class FOO handling is forthcoming.
Fixes: 8e59b5cfb9a6 dynamic_debug: add modname arg to exec_query callchain
Acked-by: Jason Baron <[email protected]>
Acked-by: Daniel Vetter <[email protected]>
Signed-off-by: Jim Cromie <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
`cat control` currently does octal escape, so '\n' becomes "\012".
Change this to display as "\n" instead, which reads much cleaner.
:#> head -n7 /proc/dynamic_debug/control
# filename:lineno [module]function flags format
init/main.c:1179 [main]initcall_blacklist =_ "blacklisting initcall %s\n"
init/main.c:1218 [main]initcall_blacklisted =_ "initcall %s blacklisted\n"
init/main.c:1424 [main]run_init_process =_ " with arguments:\n"
init/main.c:1426 [main]run_init_process =_ " %s\n"
init/main.c:1427 [main]run_init_process =_ " with environment:\n"
init/main.c:1429 [main]run_init_process =_ " %s\n"
Acked-by: Jason Baron <[email protected]>
Acked-by: Daniel Vetter <[email protected]>
Signed-off-by: Jim Cromie <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Walk the module's vector of callsites backwards; ie N..0. This
"corrects" the backwards appearance of a module's prdbg vector when
walked 0..N. I think this is due to linker mechanics, which I'm
inclined to treat as immutable, and the order is fixable in display.
No functional changes.
Combined with previous commit, which reversed tables-list, we get:
:#> head -n7 /proc/dynamic_debug/control
# filename:lineno [module]function flags format
init/main.c:1179 [main]initcall_blacklist =_ "blacklisting initcall %s\012"
init/main.c:1218 [main]initcall_blacklisted =_ "initcall %s blacklisted\012"
init/main.c:1424 [main]run_init_process =_ " with arguments:\012"
init/main.c:1426 [main]run_init_process =_ " %s\012"
init/main.c:1427 [main]run_init_process =_ " with environment:\012"
init/main.c:1429 [main]run_init_process =_ " %s\012"
Acked-by: Jason Baron <[email protected]>
Acked-by: Daniel Vetter <[email protected]>
Signed-off-by: Jim Cromie <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
/proc/dynamic_debug/control walks the prdbg catalog in "reverse",
fix this by adding new ddebug_tables to tail of list.
This puts init/main.c entries 1st, which looks more than coincidental.
no functional changes.
Acked-by: Jason Baron <[email protected]>
Acked-by: Daniel Vetter <[email protected]>
Signed-off-by: Jim Cromie <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
print "old => new" flag values to the info("change") message.
no functional change.
Acked-by: Jason Baron <[email protected]>
Acked-by: Daniel Vetter <[email protected]>
Signed-off-by: Jim Cromie <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
In https://lore.kernel.org/lkml/[email protected]/
Vincent's patch commented on, and worked around, a bug toggling
static_branch's, when a 2nd PRINTK-ish flag was added. The bug
results in a premature static_branch_disable when the 1st of 2 flags
was disabled.
The cited commit computed newflags, but then in the JUMP_LABEL block,
failed to use that result, instead using just one of the terms in it.
Using newflags instead made the code work properly.
This is Vincents test-case, reduced. It needs the 2nd flag to
demonstrate the bug, but it's explanatory here.
pt_test() {
echo 5 > /sys/module/dynamic_debug/verbose
site="module tcp" # just one callsite
echo " $site =_ " > /proc/dynamic_debug/control # clear it
# A B ~A ~B
for flg in +T +p "-T #broke here" -p; do
echo " $site $flg " > /proc/dynamic_debug/control
done;
# A B ~B ~A
for flg in +T +p "-p #broke here" -T; do
echo " $site $flg " > /proc/dynamic_debug/control
done
}
pt_test
Fixes: 84da83a6ffc0 dyndbg: combine flags & mask into a struct, simplify with it
CC: [email protected]
Acked-by: Jason Baron <[email protected]>
Acked-by: Daniel Vetter <[email protected]>
Signed-off-by: Jim Cromie <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
netlink allows to specify allowed ranges for integer types.
Unfortunately, nfnetlink passes integers in big endian, so the existing
NLA_POLICY_MAX() cannot be used.
At the moment, nfnetlink users, such as nf_tables, need to resort to
programmatic checking via helpers such as nft_parse_u32_check().
This is both cumbersome and error prone. This adds NLA_POLICY_MAX_BE
which adds range check support for BE16, BE32 and BE64 integers.
Signed-off-by: Florian Westphal <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Add new helper function to allow for splitting specified user string
into a sequence of integers. Internally it makes use of get_options() so
the returned sequence contains the integers extracted plus an additional
element that begins the sequence and specifies the integers count.
Suggested-by: Andy Shevchenko <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Signed-off-by: Cezary Rojewski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
We need the tty/serial fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
This reverts commit 16ede66973c84f890c03584f79158dd5b2d725f5.
This is causing issues with CPU stalls on my test box, revert it for
now until we understand what is going on. It looks like infinite
looping off sbitmap_queue_wake_up(), but hard to tell with a lot of
CPUs hitting this issue and the console scrolling infinitely.
Link: https://lore.kernel.org/linux-block/[email protected]/
Signed-off-by: Jens Axboe <[email protected]>
|
|
Batched completions can clear multiple bits, but we're only decrementing
the wait_cnt by one each time. This can cause waiters to never be woken,
stalling IO. Use the batched count instead.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215679
Signed-off-by: Keith Busch <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
|
|
devm_ioremap_np has never been used anywhere since it was added in early
2021, so remove it.
Signed-off-by: Christoph Hellwig <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
console_unblank() does this too (called in both places right after),
and with a lot more confidence inspiring approach to locking.
Reconstructing this story is very strange:
In b61312d353da ("oops handling: ensure that any oops is flushed to
the mtdoops console") it is claimed that a printk(" "); flushed out
the console buffer, which was removed in e3e8a75d2acf ("[PATCH]
Extract and use wake_up_klogd()"). In todays kernels this is done way
earlier in console_flush_on_panic with some really nasty tricks. I
didn't bother to fully reconstruct this all, least because the call to
bust_spinlock(0); gets moved every few years, depending upon how the
wind blows (or well, who screamed loudest about the various issue each
call site caused).
Before that commit the only calls to console_unblank() where in s390
arch code.
The other side here is the console->unblank callback, which was
introduced in 2.1.31 for the vt driver. Which predates the
console_unblank() function by a lot, which was added (without users)
in 2.4.14.3. So pretty much impossible to guess at any motivation
here. Also afaict the vt driver is the only (and always was the only)
console driver implementing the unblank callback, so no idea why a
call to console_unblank() was added for the mtdooops driver - the
action actually flushing out the console buffers is done from
console_unlock() only.
Note that as prep for the s390 users the locking was adjusted in
2.5.22 (I couldn't figure out how to properly reference the BK commit
from the historical git trees) from a normal semaphore to a trylock.
Note that a copy of the direct unblank_screen() call was added to
panic() in c7c3f05e341a ("panic: avoid deadlocks in re-entrant console
drivers"), which partially inlined the bust_spinlocks(0); call.
Long story short, I have no idea why the direct call to unblank_screen
survived for so long (the infrastructure to do it properly existed for
years), nor why it wasn't removed when the console_unblank() call was
finally added. But it makes a ton more sense to finally do that than
not - it's just better encapsulation to go through the console
functions instead of doing a direct call, so let's dare. Plus it
really does not make much sense to call the only unblank
implementation there is twice, once without, and once with appropriate
locking.
Cc: Greg Kroah-Hartman <[email protected]>
Cc: Jiri Slaby <[email protected]>
Cc: Daniel Vetter <[email protected]>
Cc: "Ilpo Järvinen" <[email protected]>
Cc: Tetsuo Handa <[email protected]>
Cc: Xuezhi Zhang <[email protected]>
Cc: Yangxi Xiang <[email protected]>
Cc: nick black <[email protected]>
Cc: Petr Mladek <[email protected]>
Cc: Andrew Morton <[email protected]>
Cc: Luis Chamberlain <[email protected]>
Cc: "Guilherme G. Piccoli" <[email protected]>
Cc: Marco Elver <[email protected]>
Cc: John Ogness <[email protected]>
Cc: Sebastian Andrzej Siewior <[email protected]>
Cc: David Gow <[email protected]>
Cc: tangmeng <[email protected]>
Cc: Tiezhu Yang <[email protected]>
Cc: Chris Wilson <[email protected]>
Reviewed-by: Petr Mladek <[email protected]>
Acked-by: Sebastian Andrzej Siewior <[email protected]>
Signed-off-by: Daniel Vetter <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Although not documented, is_signed_type() must support the 'bool' and
pointer types next to scalar and enumeration types. Add a selftest that
verifies that this macro handles all supported types correctly.
Cc: Andrew Morton <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Cc: Dan Williams <[email protected]>
Cc: Eric Dumazet <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Isabella Basso <[email protected]>
Cc: "Jason A. Donenfeld" <[email protected]>
Cc: Josh Poimboeuf <[email protected]>
Cc: Luc Van Oostenryck <[email protected]>
Cc: Masami Hiramatsu <[email protected]>
Cc: Nathan Chancellor <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Rasmus Villemoes <[email protected]>
Cc: Sander Vanheule <[email protected]>
Cc: Steven Rostedt <[email protected]>
Cc: Vlastimil Babka <[email protected]>
Cc: Yury Norov <[email protected]>
Signed-off-by: Bart Van Assche <[email protected]>
Tested-by: Isabella Basso <[email protected]>
Acked-by: Rasmus Villemoes <[email protected]>
Signed-off-by: Kees Cook <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fix from Herbert Xu:
"Fix a boot performance regression due to an unnecessary dependency on
XOR_BLOCKS"
* tag 'v6.0-p2' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: lib - remove unneeded selection of XOR_BLOCKS
|
|
Add KUnit test for hw_breakpoint constraints accounting, with various
interesting mixes of breakpoint targets (some care was taken to catch
interesting corner cases via bug-injection).
The test cannot be built as a module because it requires access to
hw_breakpoint_slots(), which is not inlinable or exported on all
architectures.
Signed-off-by: Marco Elver <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Reviewed-by: Dmitry Vyukov <[email protected]>
Acked-by: Ian Rogers <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Pull bitmap fixes from Yury Norov:
"Fix the reported issues, and implements the suggested improvements,
for the version of the cpumask tests [1] that was merged with commit
c41e8866c28c ("lib/test: introduce cpumask KUnit test suite").
These changes include fixes for the tests, and better alignment with
the KUnit style guidelines"
* tag 'bitmap-6.0-rc3' of github.com:/norov/linux:
lib/cpumask_kunit: add tests file to MAINTAINERS
lib/cpumask_kunit: log mask contents
lib/test_cpumask: follow KUnit style guidelines
lib/test_cpumask: fix cpu_possible_mask last test
lib/test_cpumask: drop cpu_possible_mask full test
|
|
If "nr + nr_tags <= map_depth", then the value of nr_tags will not be
greater than map_depth, so no additional comparison is required.
Signed-off-by: Liu Song <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
|
|
CRYPTO_LIB_CHACHA_GENERIC doesn't need to select XOR_BLOCKS. It perhaps
was thought that it's needed for __crypto_xor, but that's not the case.
Enabling XOR_BLOCKS is problematic because the XOR_BLOCKS code runs a
benchmark when it is initialized. That causes a boot time regression on
systems that didn't have it enabled before.
Therefore, remove this unnecessary and problematic selection.
Fixes: e56e18985596 ("lib/crypto: add prompts back to crypto libraries")
Cc: [email protected]
Signed-off-by: Eric Biggers <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from ipsec and netfilter (with one broken Fixes tag).
Current release - new code bugs:
- dsa: don't dereference NULL extack in dsa_slave_changeupper()
- dpaa: fix <1G ethernet on LS1046ARDB
- neigh: don't call kfree_skb() under spin_lock_irqsave()
Previous releases - regressions:
- r8152: fix the RX FIFO settings when suspending
- dsa: microchip: keep compatibility with device tree blobs with no
phy-mode
- Revert "net: macsec: update SCI upon MAC address change."
- Revert "xfrm: update SA curlft.use_time", comply with RFC 2367
Previous releases - always broken:
- netfilter: conntrack: work around exceeded TCP receive window
- ipsec: fix a null pointer dereference of dst->dev on a metadata dst
in xfrm_lookup_with_ifid
- moxa: get rid of asymmetry in DMA mapping/unmapping
- dsa: microchip: make learning configurable and keep it off while
standalone
- ice: xsk: prohibit usage of non-balanced queue id
- rxrpc: fix locking in rxrpc's sendmsg
Misc:
- another chunk of sysctl data race silencing"
* tag 'net-6.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (87 commits)
net: lantiq_xrx200: restore buffer if memory allocation failed
net: lantiq_xrx200: fix lock under memory pressure
net: lantiq_xrx200: confirm skb is allocated before using
net: stmmac: work around sporadic tx issue on link-up
ionic: VF initial random MAC address if no assigned mac
ionic: fix up issues with handling EAGAIN on FW cmds
ionic: clear broken state on generation change
rxrpc: Fix locking in rxrpc's sendmsg
net: ethernet: mtk_eth_soc: fix hw hash reporting for MTK_NETSYS_V2
MAINTAINERS: rectify file entry in BONDING DRIVER
i40e: Fix incorrect address type for IPv6 flow rules
ixgbe: stop resetting SYSTIME in ixgbe_ptp_start_cyclecounter
net: Fix a data-race around sysctl_somaxconn.
net: Fix a data-race around netdev_unregister_timeout_secs.
net: Fix a data-race around gro_normal_batch.
net: Fix data-races around sysctl_devconf_inherit_init_net.
net: Fix data-races around sysctl_fb_tunnels_only_for_init_net.
net: Fix a data-race around netdev_budget_usecs.
net: Fix data-races around sysctl_max_skb_frags.
net: Fix a data-race around netdev_budget.
...
|
|
There is no modification for param bitmap in function
bitmap_string() and bitmap_list_string(), so add const
modifier for it.
Signed-off-by: Jian Shen <[email protected]>
Signed-off-by: Guangbin Huang <[email protected]>
Reviewed-by: Steven Rostedt (Google) <[email protected]>
Reviewed-by: Sergey Senozhatsky <[email protected]>
Signed-off-by: Petr Mladek <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
For extra context, log the contents of the masks under test. This
should help with finding out why a certain test fails.
Link: https://lore.kernel.org/lkml/CABVgOSkPXBc-PWk1zBZRQ_Tt+Sz1ruFHBj3ixojymZF=Vi4tpQ@mail.gmail.com/
Suggested-by: David Gow <[email protected]>
Signed-off-by: Sander Vanheule <[email protected]>
Signed-off-by: Yury Norov <[email protected]>
|
|
The cpumask test suite doesn't follow the KUnit style guidelines, as
laid out in Documentation/dev-tools/kunit/style.rst. The file is
renamed to lib/cpumask_kunit.c to clearly distinguish it from other,
non-KUnit, tests.
Link: https://lore.kernel.org/lkml/[email protected]/
Suggested-by: Maíra Canal <[email protected]>
Signed-off-by: Sander Vanheule <[email protected]>
Reviewed-by: Maíra Canal <[email protected]>
Reviewed-by: David Gow <[email protected]>
Acked-by: Yury Norov <[email protected]>
Signed-off-by: Yury Norov <[email protected]>
|
|
Since cpumask_first() on the cpu_possible_mask must return at most
nr_cpu_ids - 1 for a valid result, cpumask_last() cannot return anything
larger than this value. As test_cpumask_weight() also verifies that the
total weight of cpu_possible_mask must equal nr_cpu_ids, the last bit
set in this mask must be at nr_cpu_ids - 1.
Fixes: c41e8866c28c ("lib/test: introduce cpumask KUnit test suite")
Link: https://lore.kernel.org/lkml/[email protected]/
Reported-by: Maíra Canal <[email protected]>
Signed-off-by: Sander Vanheule <[email protected]>
Tested-by: Maíra Canal <[email protected]>
Reviewed-by: David Gow <[email protected]>
Acked-by: Yury Norov <[email protected]>
Signed-off-by: Yury Norov <[email protected]>
|
|
When the number of CPUs that can possibly be brought online is known at
boot time, e.g. when HOTPLUG is disabled, nr_cpu_ids may be smaller than
NR_CPUS. In that case, cpu_possible_mask would not be completely filled,
and cpumask_full(cpu_possible_mask) can return false for valid system
configurations.
Without this test, cpu_possible_mask contents are still constrained by
a check on cpumask_weight(), as well as tests in test_cpumask_first(),
test_cpumask_last(), test_cpumask_next(), and test_cpumask_iterators().
Fixes: c41e8866c28c ("lib/test: introduce cpumask KUnit test suite")
Link: https://lore.kernel.org/lkml/[email protected]/
Reported-by: Maíra Canal <[email protected]>
Signed-off-by: Sander Vanheule <[email protected]>
Tested-by: Maíra Canal <[email protected]>
Reviewed-by: David Gow <[email protected]>
Signed-off-by: Yury Norov <[email protected]>
|
|
While reading rs->interval and rs->burst, they can be changed
concurrently via sysctl (e.g. net_ratelimit_state). Thus, we
need to add READ_ONCE() to their readers.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
There are two problems can lead to lost wakeup:
1) invalid wakeup on the wrong waitqueue:
For example, 2 * wake_batch tags are put, while only wake_batch threads
are woken:
__sbq_wake_up
atomic_cmpxchg -> reset wait_cnt
__sbq_wake_up -> decrease wait_cnt
...
__sbq_wake_up -> wait_cnt is decreased to 0 again
atomic_cmpxchg
sbq_index_atomic_inc -> increase wake_index
wake_up_nr -> wake up and waitqueue might be empty
sbq_index_atomic_inc -> increase again, one waitqueue is skipped
wake_up_nr -> invalid wake up because old wakequeue might be empty
To fix the problem, increasing 'wake_index' before resetting 'wait_cnt'.
2) 'wait_cnt' can be decreased while waitqueue is empty
As pointed out by Jan Kara, following race is possible:
CPU1 CPU2
__sbq_wake_up __sbq_wake_up
sbq_wake_ptr() sbq_wake_ptr() -> the same
wait_cnt = atomic_dec_return()
/* decreased to 0 */
sbq_index_atomic_inc()
/* move to next waitqueue */
atomic_set()
/* reset wait_cnt */
wake_up_nr()
/* wake up on the old waitqueue */
wait_cnt = atomic_dec_return()
/*
* decrease wait_cnt in the old
* waitqueue, while it can be
* empty.
*/
Fix the problem by waking up before updating 'wake_index' and
'wait_cnt'.
With this patch, noted that 'wait_cnt' is still decreased in the old
empty waitqueue, however, the wakeup is redirected to a active waitqueue,
and the extra decrement on the old empty waitqueue is not handled.
Fixes: 88459642cba4 ("blk-mq: abstract tag allocation out into sbitmap library")
Signed-off-by: Yu Kuai <[email protected]>
Reviewed-by: Jan Kara <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
|
|
No architecture actually defines this, so it's unneeded.
Signed-off-by: Eric Biggers <[email protected]>
Reviewed-by: Jason A. Donenfeld <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
|
|
CRYPTO_LIB_CHACHA depends on CRYPTO for __crypto_xor, defined in
crypto/algapi.c. This is a layering violation because the dependencies
should only go in the other direction (crypto/ => lib/crypto/). Also
the correct dependency would be CRYPTO_ALGAPI, not CRYPTO. Fix this by
moving __crypto_xor into the utils module in lib/crypto/.
Note that CRYPTO_LIB_CHACHA_GENERIC selected XOR_BLOCKS, which is
unrelated and unnecessary. It was perhaps thought that XOR_BLOCKS was
needed for __crypto_xor, but that's not the case.
Signed-off-by: Eric Biggers <[email protected]>
Reviewed-by: Jason A. Donenfeld <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
|
|
As requested at
https://lore.kernel.org/r/[email protected], move
__crypto_memneq into lib/crypto/ and put it under a new tristate. The
tristate is CRYPTO_LIB_UTILS, and it builds a module libcryptoutils. As
more crypto library utilities are being added, this creates a single
place for them to go without cluttering up the main lib directory.
The module's main file will be lib/crypto/utils.c. However, leave
memneq.c as its own file because of its nonstandard license.
Signed-off-by: Eric Biggers <[email protected]>
Reviewed-by: Jason A. Donenfeld <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
|
|
Since lib/cpumask.o is only built for CONFIG_SMP=y, NR_CPUS will always
be greater than 1 at compile time. This makes checking for that
condition unnecesarry, so it can be dropped.
Signed-off-by: Sander Vanheule <[email protected]>
Signed-off-by: Yury Norov <[email protected]>
|
|
In the uniprocessor case, cpumask_next_wrap() can be simplified, as the
number of valid argument combinations is limited:
- 'start' can only be 0
- 'n' can only be -1 or 0
The only valid CPU that can then be returned, if any, will be the first
one set in the provided 'mask'.
For NR_CPUS == 1, include/linux/cpumask.h now provides an inline
definition of cpumask_next_wrap(), which will conflict with the one
provided by lib/cpumask.c. Make building of lib/cpumask.o again depend
on CONFIG_SMP=y (i.e. NR_CPUS > 1) to avoid the re-definition.
Suggested-by: Yury Norov <[email protected]>
Signed-off-by: Sander Vanheule <[email protected]>
Signed-off-by: Yury Norov <[email protected]>
|
|
Commit 36d4b36b6959 ("lib/nodemask: inline next_node_in() and
node_random()") removed the lib/nodemask.c file, but the remove didn't
happen when the patch was applied.
Reported-by: "Aneesh Kumar K.V" <[email protected]>
Signed-off-by: Yury Norov <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull more iov_iter updates from Al Viro:
- more new_sync_{read,write}() speedups - ITER_UBUF introduction
- ITER_PIPE cleanups
- unification of iov_iter_get_pages/iov_iter_get_pages_alloc and
switching them to advancing semantics
- making ITER_PIPE take high-order pages without splitting them
- handling copy_page_from_iter() for high-order pages properly
* tag 'pull-work.iov_iter-rebased' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (32 commits)
fix copy_page_from_iter() for compound destinations
hugetlbfs: copy_page_to_iter() can deal with compound pages
copy_page_to_iter(): don't split high-order page in case of ITER_PIPE
expand those iov_iter_advance()...
pipe_get_pages(): switch to append_pipe()
get rid of non-advancing variants
ceph: switch the last caller of iov_iter_get_pages_alloc()
9p: convert to advancing variant of iov_iter_get_pages_alloc()
af_alg_make_sg(): switch to advancing variant of iov_iter_get_pages()
iter_to_pipe(): switch to advancing variant of iov_iter_get_pages()
block: convert to advancing variants of iov_iter_get_pages{,_alloc}()
iov_iter: advancing variants of iov_iter_get_pages{,_alloc}()
iov_iter: saner helper for page array allocation
fold __pipe_get_pages() into pipe_get_pages()
ITER_XARRAY: don't open-code DIV_ROUND_UP()
unify the rest of iov_iter_get_pages()/iov_iter_get_pages_alloc() guts
unify xarray_get_pages() and xarray_get_pages_alloc()
unify pipe_get_pages() and pipe_get_pages_alloc()
iov_iter_get_pages(): sanity-check arguments
iov_iter_get_pages_alloc(): lift freeing pages array on failure exits into wrapper
...
|
|
had been broken for ITER_BVEC et.al. since ever (OK, v3.17 when
ITER_BVEC had first appeared)...
Signed-off-by: Al Viro <[email protected]>
|
|
... just shove it into one pipe_buffer.
Signed-off-by: Al Viro <[email protected]>
|
|
Signed-off-by: Al Viro <[email protected]>
|
|
now that we are advancing the iterator, there's no need to
treat the first page separately - just call append_pipe()
in a loop.
Signed-off-by: Al Viro <[email protected]>
|
|
mechanical change; will be further massaged in subsequent commits
Reviewed-by: Jeff Layton <[email protected]>
Signed-off-by: Al Viro <[email protected]>
|
|
All call sites of get_pages_array() are essenitally identical now.
Replace with common helper...
Returns number of slots available in resulting array or 0 on OOM;
it's up to the caller to make sure it doesn't ask to zero-entry
array (i.e. neither maxpages nor size are allowed to be zero).
Reviewed-by: Jeff Layton <[email protected]>
Signed-off-by: Al Viro <[email protected]>
|
|
... and don't mangle maxsize there - turn the loop into counting
one instead. Easier to see that we won't run out of array that
way. Note that special treatment of the partial buffer in that
thing is an artifact of the non-advancing semantics of
iov_iter_get_pages() - if not for that, it would be append_pipe(),
same as the body of the loop that follows it. IOW, once we make
iov_iter_get_pages() advancing, the whole thing will turn into
calculate how many pages do we want
allocate an array (if needed)
call append_pipe() that many times.
Reviewed-by: Jeff Layton <[email protected]>
Signed-off-by: Al Viro <[email protected]>
|
|
Reviewed-by: Jeff Layton <[email protected]>
Signed-off-by: Al Viro <[email protected]>
|
|
same as for pipes and xarrays; after that iov_iter_get_pages() becomes
a wrapper for __iov_iter_get_pages_alloc().
Signed-off-by: Al Viro <[email protected]>
|
|
same as for pipes
Reviewed-by: Jeff Layton <[email protected]>
Signed-off-by: Al Viro <[email protected]>
|
|
The differences between those two are
* pipe_get_pages() gets a non-NULL struct page ** value pointing to
preallocated array + array size.
* pipe_get_pages_alloc() gets an address of struct page ** variable that
contains NULL, allocates the array and (on success) stores its address in
that variable.
Not hard to combine - always pass struct page ***, have
the previous pipe_get_pages_alloc() caller pass ~0U as cap for
array size.
Reviewed-by: Jeff Layton <[email protected]>
Signed-off-by: Al Viro <[email protected]>
|
|
zero maxpages is bogus, but best treated as "just return 0";
NULL pages, OTOH, should be treated as a hard bug.
get rid of now completely useless checks in xarray_get_pages{,_alloc}().
Reviewed-by: Jeff Layton <[email protected]>
Signed-off-by: Al Viro <[email protected]>
|
|
wrapper
Incidentally, ITER_XARRAY did *not* free the sucker in case when
iter_xarray_populate_pages() returned 0...
Reviewed-by: Jeff Layton <[email protected]>
Signed-off-by: Al Viro <[email protected]>
|
|
All their callers are next to each other; all of them
want the total amount of pages and, possibly, the
offset in the partial final buffer.
Combine into a new helper (pipe_npages()), fix the
bogosity in pipe_space_for_user(), while we are at it.
Signed-off-by: Al Viro <[email protected]>
|