aboutsummaryrefslogtreecommitdiff
path: root/kernel
AgeCommit message (Collapse)AuthorFilesLines
2020-11-14genirq: Remove GENERIC_IRQ_LEGACY_ALLOC_HWIRQThomas Gleixner2-56/+0
Commit bb9d812643d8 ("arch: remove tile port") removed the last user of this cruft two years ago... Signed-off-by: Thomas Gleixner <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-11-14panic: don't dump stack twice on warnChristophe Leroy1-1/+2
Before commit 3f388f28639f ("panic: dump registers on panic_on_warn"), __warn() was calling show_regs() when regs was not NULL, and show_stack() otherwise. After that commit, show_stack() is called regardless of whether show_regs() has been called or not, leading to duplicated Call Trace: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 1 at arch/powerpc/mm/nohash/8xx.c:186 mmu_mark_initmem_nx+0x24/0x94 CPU: 0 PID: 1 Comm: swapper Not tainted 5.10.0-rc2-s3k-dev-01375-gf46ec0d3ecbd-dirty #4092 NIP: c00128b4 LR: c0010228 CTR: 00000000 REGS: c9023e40 TRAP: 0700 Not tainted (5.10.0-rc2-s3k-dev-01375-gf46ec0d3ecbd-dirty) MSR: 00029032 <EE,ME,IR,DR,RI> CR: 24000424 XER: 00000000 GPR00: c0010228 c9023ef8 c2100000 0074c000 ffffffff 00000000 c2151000 c07b3880 GPR08: ff000900 0074c000 c8000000 c33b53a8 24000822 00000000 c0003a20 00000000 GPR16: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 GPR24: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00800000 NIP [c00128b4] mmu_mark_initmem_nx+0x24/0x94 LR [c0010228] free_initmem+0x20/0x58 Call Trace: free_initmem+0x20/0x58 kernel_init+0x1c/0x114 ret_from_kernel_thread+0x14/0x1c Instruction dump: 7d291850 7d234b78 4e800020 9421ffe0 7c0802a6 bfc10018 3fe0c060 3bff0000 3fff4080 3bffffff 90010024 57ff0010 <0fe00000> 392001cd 7c3e0b78 953e0008 CPU: 0 PID: 1 Comm: swapper Not tainted 5.10.0-rc2-s3k-dev-01375-gf46ec0d3ecbd-dirty #4092 Call Trace: __warn+0x8c/0xd8 (unreliable) report_bug+0x11c/0x154 program_check_exception+0x1dc/0x6e0 ret_from_except_full+0x0/0x4 --- interrupt: 700 at mmu_mark_initmem_nx+0x24/0x94 LR = free_initmem+0x20/0x58 free_initmem+0x20/0x58 kernel_init+0x1c/0x114 ret_from_kernel_thread+0x14/0x1c ---[ end trace 31702cd2a9570752 ]--- Only call show_stack() when regs is NULL. Fixes: 3f388f28639f ("panic: dump registers on panic_on_warn") Signed-off-by: Christophe Leroy <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Cc: Alexey Kardashevskiy <[email protected]> Cc: Kefeng Wang <[email protected]> Link: https://lkml.kernel.org/r/e8c055458b080707f1bc1a98ff8bea79d0cec445.1604748361.git.christophe.leroy@csgroup.eu Signed-off-by: Linus Torvalds <[email protected]>
2020-11-14kernel/watchdog: fix watchdog_allowed_mask not used warningSantosh Sivaraj1-2/+2
Define watchdog_allowed_mask only when SOFTLOCKUP_DETECTOR is enabled. Fixes: 7feeb9cd4f5b ("watchdog/sysctl: Clean up sysctl variable name space") Signed-off-by: Santosh Sivaraj <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Reviewed-by: Petr Mladek <[email protected]> Cc: Thomas Gleixner <[email protected]> Link: https://lkml.kernel.org/r/[email protected] Signed-off-by: Linus Torvalds <[email protected]>
2020-11-14reboot: fix overflow parsing reboot cpu numberMatteo Croce1-0/+7
Limit the CPU number to num_possible_cpus(), because setting it to a value lower than INT_MAX but higher than NR_CPUS produces the following error on reboot and shutdown: BUG: unable to handle page fault for address: ffffffff90ab1bb0 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 1c09067 P4D 1c09067 PUD 1c0a063 PMD 0 Oops: 0000 [#1] SMP CPU: 1 PID: 1 Comm: systemd-shutdow Not tainted 5.9.0-rc8-kvm #110 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-2.fc32 04/01/2014 RIP: 0010:migrate_to_reboot_cpu+0xe/0x60 Code: ea ea 00 48 89 fa 48 c7 c7 30 57 f1 81 e9 fa ef ff ff 66 2e 0f 1f 84 00 00 00 00 00 53 8b 1d d5 ea ea 00 e8 14 33 fe ff 89 da <48> 0f a3 15 ea fc bd 00 48 89 d0 73 29 89 c2 c1 e8 06 65 48 8b 3c RSP: 0018:ffffc90000013e08 EFLAGS: 00010246 RAX: ffff88801f0a0000 RBX: 0000000077359400 RCX: 0000000000000000 RDX: 0000000077359400 RSI: 0000000000000002 RDI: ffffffff81c199e0 RBP: ffffffff81c1e3c0 R08: ffff88801f41f000 R09: ffffffff81c1e348 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: 00007f32bedf8830 R14: 00000000fee1dead R15: 0000000000000000 FS: 00007f32bedf8980(0000) GS:ffff88801f480000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffff90ab1bb0 CR3: 000000001d057000 CR4: 00000000000006a0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: __do_sys_reboot.cold+0x34/0x5b do_syscall_64+0x2d/0x40 Fixes: 1b3a5d02ee07 ("reboot: move arch/x86 reboot= handling to generic kernel") Signed-off-by: Matteo Croce <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Cc: Arnd Bergmann <[email protected]> Cc: Fabian Frederick <[email protected]> Cc: Greg Kroah-Hartman <[email protected]> Cc: Guenter Roeck <[email protected]> Cc: Kees Cook <[email protected]> Cc: Mike Rapoport <[email protected]> Cc: Pavel Tatashin <[email protected]> Cc: Petr Mladek <[email protected]> Cc: Robin Holt <[email protected]> Cc: <[email protected]> Link: https://lkml.kernel.org/r/[email protected] Signed-off-by: Linus Torvalds <[email protected]>
2020-11-14Revert "kernel/reboot.c: convert simple_strtoul to kstrtoint"Matteo Croce1-14/+7
Patch series "fix parsing of reboot= cmdline", v3. The parsing of the reboot= cmdline has two major errors: - a missing bound check can crash the system on reboot - parsing of the cpu number only works if specified last Fix both. This patch (of 2): This reverts commit 616feab753972b97. kstrtoint() and simple_strtoul() have a subtle difference which makes them non interchangeable: if a non digit character is found amid the parsing, the former will return an error, while the latter will just stop parsing, e.g. simple_strtoul("123xyx") = 123. The kernel cmdline reboot= argument allows to specify the CPU used for rebooting, with the syntax `s####` among the other flags, e.g. "reboot=warm,s31,force", so if this flag is not the last given, it's silently ignored as well as the subsequent ones. Fixes: 616feab75397 ("kernel/reboot.c: convert simple_strtoul to kstrtoint") Signed-off-by: Matteo Croce <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Cc: Guenter Roeck <[email protected]> Cc: Petr Mladek <[email protected]> Cc: Arnd Bergmann <[email protected]> Cc: Mike Rapoport <[email protected]> Cc: Kees Cook <[email protected]> Cc: Pavel Tatashin <[email protected]> Cc: Robin Holt <[email protected]> Cc: Fabian Frederick <[email protected]> Cc: Greg Kroah-Hartman <[email protected]> Cc: <[email protected]> Link: https://lkml.kernel.org/r/[email protected] Signed-off-by: Linus Torvalds <[email protected]>
2020-11-14Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextJakub Kicinski12-147/+1076
Daniel Borkmann says: ==================== pull-request: bpf-next 2020-11-14 1) Add BTF generation for kernel modules and extend BTF infra in kernel e.g. support for split BTF loading and validation, from Andrii Nakryiko. 2) Support for pointers beyond pkt_end to recognize LLVM generated patterns on inlined branch conditions, from Alexei Starovoitov. 3) Implements bpf_local_storage for task_struct for BPF LSM, from KP Singh. 4) Enable FENTRY/FEXIT/RAW_TP tracing program to use the bpf_sk_storage infra, from Martin KaFai Lau. 5) Add XDP bulk APIs that introduce a defer/flush mechanism to optimize the XDP_REDIRECT path, from Lorenzo Bianconi. 6) Fix a potential (although rather theoretical) deadlock of hashtab in NMI context, from Song Liu. 7) Fixes for cross and out-of-tree build of bpftool and runqslower allowing build for different target archs on same source tree, from Jean-Philippe Brucker. 8) Fix error path in htab_map_alloc() triggered from syzbot, from Eric Dumazet. 9) Move functionality from test_tcpbpf_user into the test_progs framework so it can run in BPF CI, from Alexander Duyck. 10) Lift hashtab key_size limit to be larger than MAX_BPF_STACK, from Florian Lehner. Note that for the fix from Song we have seen a sparse report on context imbalance which requires changes in sparse itself for proper annotation detection where this is currently being discussed on linux-sparse among developers [0]. Once we have more clarification/guidance after their fix, Song will follow-up. [0] https://lore.kernel.org/linux-sparse/CAHk-=wh4bx8A8dHnX612MsDO13st6uzAz1mJ1PaHHVevJx_ZCw@mail.gmail.com/T/ https://lore.kernel.org/linux-sparse/[email protected]/T/ * git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (66 commits) net: mlx5: Add xdp tx return bulking support net: mvpp2: Add xdp tx return bulking support net: mvneta: Add xdp tx return bulking support net: page_pool: Add bulk support for ptr_ring net: xdp: Introduce bulking for xdp tx return path bpf: Expose bpf_d_path helper to sleepable LSM hooks bpf: Augment the set of sleepable LSM hooks bpf: selftest: Use bpf_sk_storage in FENTRY/FEXIT/RAW_TP bpf: Allow using bpf_sk_storage in FENTRY/FEXIT/RAW_TP bpf: Rename some functions in bpf_sk_storage bpf: Folding omem_charge() into sk_storage_charge() selftests/bpf: Add asm tests for pkt vs pkt_end comparison. selftests/bpf: Add skb_pkt_end test bpf: Support for pointers beyond pkt_end. tools/bpf: Always run the *-clean recipes tools/bpf: Add bootstrap/ to .gitignore bpf: Fix NULL dereference in bpf_task_storage tools/bpftool: Fix build slowdown tools/runqslower: Build bpftool using HOSTCC tools/runqslower: Enable out-of-tree build ... ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2020-11-14bpf: Relax return code check for subprogramsDmitrii Banshchikov1-2/+13
Currently verifier enforces return code checks for subprograms in the same manner as it does for program entry points. This prevents returning arbitrary scalar values from subprograms. Scalar type of returned values is checked by btf_prepare_func_args() and hence it should be safe to allow only scalars for now. Relax return code checks for subprograms and allow any correct scalar values. Fixes: 51c39bb1d5d10 (bpf: Introduce function-by-function verification) Signed-off-by: Dmitrii Banshchikov <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Acked-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2020-11-14futex: Remove unused empty compat_exit_robust_list()Lukas Bulwahn1-2/+0
Commit ba31c1a48538 ("futex: Move futex exit handling into futex code") introduced compat_exit_robust_list() with a full-fledged implementation for CONFIG_COMPAT, and an empty-body function for !CONFIG_COMPAT. However, compat_exit_robust_list() is only used in futex_mm_release() under #ifdef CONFIG_COMPAT. Hence for !CONFIG_COMPAT, make CC=clang W=1 warns: kernel/futex.c:314:20: warning: unused function 'compat_exit_robust_list' [-Wunused-function] There is no need to declare the unused empty function for !CONFIG_COMPAT. Simply remove it. Signed-off-by: Lukas Bulwahn <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Reviewed-by: Nathan Chancellor <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-11-13Merge tag 'arm64-fixes' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Will Deacon: - Spectre/Meltdown safelisting for some Qualcomm KRYO cores - Fix RCU splat when failing to online a CPU due to a feature mismatch - Fix a recently introduced sparse warning in kexec() - Fix handling of CPU erratum 1418040 for late CPUs - Ensure hot-added memory falls within linear-mapped region * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: cpu_errata: Apply Erratum 845719 to KRYO2XX Silver arm64: proton-pack: Add KRYO2XX silver CPUs to spectre-v2 safe-list arm64: kpti: Add KRYO2XX gold/silver CPU cores to kpti safelist arm64: Add MIDR value for KRYO2XX gold/silver CPU cores arm64/mm: Validate hotplug range before creating linear mapping arm64: smp: Tell RCU about CPUs that fail to come online arm64: psci: Avoid printing in cpu_psci_cpu_die() arm64: kexec_file: Fix sparse warning arm64: errata: Fix handling of 1418040 with late CPU onlining
2020-11-13tracing: Remove the useless value assignment in test_create_synth_event()Kaixu Xia1-1/+1
The value of variable ret is overwritten on the delete branch in the test_create_synth_event() and we care more about the above error than this delete portion. Remove it. Link: https://lkml.kernel.org/r/[email protected] Reported-by: Tosk Robot <[email protected]> Signed-off-by: Kaixu Xia <[email protected]> Signed-off-by: Steven Rostedt (VMware) <[email protected]>
2020-11-13livepatch: Use the default ftrace_ops instead of REGS when ARGS is availableSteven Rostedt (VMware)2-5/+6
When CONFIG_HAVE_DYNAMIC_FTRACE_WITH_ARGS is available, the ftrace call will be able to set the ip of the calling function. This will improve the performance of live kernel patching where it does not need all the regs to be stored just to change the instruction pointer. If all archs that support live kernel patching also support HAVE_DYNAMIC_FTRACE_WITH_ARGS, then the architecture specific function klp_arch_set_pc() could be made generic. It is possible that an arch can support HAVE_DYNAMIC_FTRACE_WITH_ARGS but not HAVE_DYNAMIC_FTRACE_WITH_REGS and then have access to live patching. Cc: Josh Poimboeuf <[email protected]> Cc: Jiri Kosina <[email protected]> Cc: [email protected] Acked-by: Peter Zijlstra (Intel) <[email protected]> Acked-by: Miroslav Benes <[email protected]> Signed-off-by: Steven Rostedt (VMware) <[email protected]>
2020-11-13ftrace/x86: Allow for arguments to be passed in to ftrace_regs by defaultSteven Rostedt (VMware)1-0/+9
Currently, the only way to get access to the registers of a function via a ftrace callback is to set the "FL_SAVE_REGS" bit in the ftrace_ops. But as this saves all regs as if a breakpoint were to trigger (for use with kprobes), it is expensive. The regs are already saved on the stack for the default ftrace callbacks, as that is required otherwise a function being traced will get the wrong arguments and possibly crash. And on x86, the arguments are already stored where they would be on a pt_regs structure to use that code for both the regs version of a callback, it makes sense to pass that information always to all functions. If an architecture does this (as x86_64 now does), it is to set HAVE_DYNAMIC_FTRACE_WITH_ARGS, and this will let the generic code that it could have access to arguments without having to set the flags. This also includes having the stack pointer being saved, which could be used for accessing arguments on the stack, as well as having the function graph tracer not require its own trampoline! Acked-by: Peter Zijlstra (Intel) <[email protected]> Signed-off-by: Steven Rostedt (VMware) <[email protected]>
2020-11-13ftrace: Have the callbacks receive a struct ftrace_regs instead of pt_regsSteven Rostedt (VMware)9-32/+37
In preparation to have arguments of a function passed to callbacks attached to functions as default, change the default callback prototype to receive a struct ftrace_regs as the forth parameter instead of a pt_regs. For callbacks that set the FL_SAVE_REGS flag in their ftrace_ops flags, they will now need to get the pt_regs via a ftrace_get_regs() helper call. If this is called by a callback that their ftrace_ops did not have a FL_SAVE_REGS flag set, it that helper function will return NULL. This will allow the ftrace_regs to hold enough just to get the parameters and stack pointer, but without the worry that callbacks may have a pt_regs that is not completely filled. Acked-by: Peter Zijlstra (Intel) <[email protected]> Reviewed-by: Masami Hiramatsu <[email protected]> Signed-off-by: Steven Rostedt (VMware) <[email protected]>
2020-11-13bpf: Expose bpf_d_path helper to sleepable LSM hooksKP Singh1-1/+7
Sleepable hooks are never called from an NMI/interrupt context, so it is safe to use the bpf_d_path helper in LSM programs attaching to these hooks. The helper is not restricted to sleepable programs and merely uses the list of sleepable hooks as the initial subset of LSM hooks where it can be used. Signed-off-by: KP Singh <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Acked-by: Andrii Nakryiko <[email protected]> Acked-by: Yonghong Song <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2020-11-13bpf: Augment the set of sleepable LSM hooksKP Singh2-15/+82
Update the set of sleepable hooks with the ones that do not trigger a warning with might_fault() when exercised with the correct kernel config options enabled, i.e. DEBUG_ATOMIC_SLEEP=y LOCKDEP=y PROVE_LOCKING=y This means that a sleepable LSM eBPF program can be attached to these LSM hooks. A new helper method bpf_lsm_is_sleepable_hook is added and the set is maintained locally in bpf_lsm.c Signed-off-by: KP Singh <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2020-11-12bpf: Allow using bpf_sk_storage in FENTRY/FEXIT/RAW_TPMartin KaFai Lau1-0/+5
This patch enables the FENTRY/FEXIT/RAW_TP tracing program to use the bpf_sk_storage_(get|delete) helper, so those tracing programs can access the sk's bpf_local_storage and the later selftest will show some examples. The bpf_sk_storage is currently used in bpf-tcp-cc, tc, cg sockops...etc which is running either in softirq or task context. This patch adds bpf_sk_storage_get_tracing_proto and bpf_sk_storage_delete_tracing_proto. They will check in runtime that the helpers can only be called when serving softirq or running in a task context. That should enable most common tracing use cases on sk. During the load time, the new tracing_allowed() function will ensure the tracing prog using the bpf_sk_storage_(get|delete) helper is not tracing any bpf_sk_storage*() function itself. The sk is passed as "void *" when calling into bpf_local_storage. This patch only allows tracing a kernel function. Signed-off-by: Martin KaFai Lau <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Acked-by: Song Liu <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2020-11-12Merge https://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski13-36/+85
Signed-off-by: Jakub Kicinski <[email protected]>
2020-11-13bpf: Support for pointers beyond pkt_end.Alexei Starovoitov1-22/+107
This patch adds the verifier support to recognize inlined branch conditions. The LLVM knows that the branch evaluates to the same value, but the verifier couldn't track it. Hence causing valid programs to be rejected. The potential LLVM workaround: https://reviews.llvm.org/D87428 can have undesired side effects, since LLVM doesn't know that skb->data/data_end are being compared. LLVM has to introduce extra boolean variable and use inline_asm trick to force easier for the verifier assembly. Instead teach the verifier to recognize that r1 = skb->data; r1 += 10; r2 = skb->data_end; if (r1 > r2) { here r1 points beyond packet_end and subsequent if (r1 > r2) // always evaluates to "true". } Signed-off-by: Alexei Starovoitov <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Tested-by: Jiri Olsa <[email protected]> Acked-by: John Fastabend <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2020-11-12Merge tag 'net-5.10-rc4' of ↵Linus Torvalds5-7/+42
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Current release - regressions: - arm64: dts: fsl-ls1028a-kontron-sl28: specify in-band mode for ENETC Current release - bugs in new features: - mptcp: provide rmem[0] limit offset to fix oops Previous release - regressions: - IPv6: Set SIT tunnel hard_header_len to zero to fix path MTU calculations - lan743x: correctly handle chips with internal PHY - bpf: Don't rely on GCC __attribute__((optimize)) to disable GCSE - mlx5e: Fix VXLAN port table synchronization after function reload Previous release - always broken: - bpf: Zero-fill re-used per-cpu map element - fix out-of-order UDP packets when forwarding with UDP GSO fraglists turned on: - fix UDP header access on Fast/frag0 UDP GRO - fix IP header access and skb lookup on Fast/frag0 UDP GRO - ethtool: netlink: add missing netdev_features_change() call - net: Update window_clamp if SOCK_RCVBUF is set - igc: Fix returning wrong statistics - ch_ktls: fix multiple leaks and corner cases in Chelsio TLS offload - tunnels: Fix off-by-one in lower MTU bounds for ICMP/ICMPv6 replies - r8169: disable hw csum for short packets on all chip versions - vrf: Fix fast path output packet handling with async Netfilter rules" * tag 'net-5.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (65 commits) lan743x: fix use of uninitialized variable net: udp: fix IP header access and skb lookup on Fast/frag0 UDP GRO net: udp: fix UDP header access on Fast/frag0 UDP GRO devlink: Avoid overwriting port attributes of registered port vrf: Fix fast path output packet handling with async Netfilter rules cosa: Add missing kfree in error path of cosa_write net: switch to the kernel.org patchwork instance ch_ktls: stop the txq if reaches threshold ch_ktls: tcb update fails sometimes ch_ktls/cxgb4: handle partial tag alone SKBs ch_ktls: don't free skb before sending FIN ch_ktls: packet handling prior to start marker ch_ktls: Correction in middle record handling ch_ktls: missing handling of header alone ch_ktls: Correction in trimmed_len calculation cxgb4/ch_ktls: creating skbs causes panic ch_ktls: Update cheksum information ch_ktls: Correction in finding correct length cxgb4/ch_ktls: decrypted bit is not enough net/x25: Fix null-ptr-deref in x25_connect ...
2020-11-12Merge tag 'pm-5.10-rc4' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fixes from Rafael Wysocki: "Make the intel_pstate driver behave as expected when it operates in the passive mode with HWP enabled and the 'powersave' governor on top of it" * tag 'pm-5.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpufreq: intel_pstate: Take CPUFREQ_GOV_STRICT_TARGET into account cpufreq: Add strict_target to struct cpufreq_policy cpufreq: Introduce CPUFREQ_GOV_STRICT_TARGET cpufreq: Introduce governor flags
2020-11-11bpf: Fix NULL dereference in bpf_task_storageMartin KaFai Lau1-1/+1
In bpf_pid_task_storage_update_elem(), it missed to test the !task_storage_ptr(task) which then could trigger a NULL pointer exception in bpf_local_storage_update(). Fixes: 4cf1bc1f1045 ("bpf: Implement task local storage") Signed-off-by: Martin KaFai Lau <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Tested-by: Roman Gushchin <[email protected]> Acked-by: KP Singh <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2020-11-11Merge branch 'stable/for-linus-5.10-rc2' of ↵Linus Torvalds1-11/+11
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb Pull swiotlb fixes from Konrad Rzeszutek Wilk: "Two tiny fixes for issues that make drivers under Xen unhappy under certain conditions" * 'stable/for-linus-5.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb: swiotlb: remove the tbl_dma_addr argument to swiotlb_tbl_map_single swiotlb: fix "x86: Don't panic if can not alloc buffer for swiotlb"
2020-11-11printk: ringbuffer: Reference text_data_ring directly in callees.Nikolay Borisov1-17/+15
A bunch of functions in the new ringbuffer code take both a printk_ringbuffer struct and a separate prb_data_ring. This is a relic from an earlier version of the code when a second data ring was present. Since this is no longer the case remove the extra function argument from: - data_make_reusable() - data_push_tail() - data_alloc() - data_realloc() Signed-off-by: Nikolay Borisov <[email protected]> Reviewed-by: John Ogness <[email protected]> Reviewed-by: Petr Mladek <[email protected]> Signed-off-by: Petr Mladek <[email protected]>
2020-11-11bpf: Fix unsigned 'datasec_id' compared with zero in check_pseudo_btf_idKaixu Xia1-1/+2
The unsigned variable datasec_id is assigned a return value from the call to check_pseudo_btf_id(), which may return negative error code. This fixes the following coccicheck warning: ./kernel/bpf/verifier.c:9616:5-15: WARNING: Unsigned expression compared with zero: datasec_id > 0 Fixes: eaa6bcb71ef6 ("bpf: Introduce bpf_per_cpu_ptr()") Reported-by: Tosk Robot <[email protected]> Signed-off-by: Kaixu Xia <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Acked-by: Andrii Nakryiko <[email protected]> Acked-by: John Fastabend <[email protected]> Cc: Hao Luo <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2020-11-10bpf: Compile out btf_parse_module() if module BTF is not enabledAndrii Nakryiko1-0/+4
Make sure btf_parse_module() is compiled out if module BTFs are not enabled. Fixes: 36e68442d1af ("bpf: Load and verify kernel module BTFs") Reported-by: Stephen Rothwell <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2020-11-10tracing: Fix some typos in commentsQiujun Huang15-25/+25
s/detetector/detector/ s/enfoced/enforced/ s/writen/written/ s/actualy/actually/ s/bascially/basically/ s/Regarldess/Regardless/ s/zeroes/zeros/ s/followd/followed/ s/incrememented/incremented/ s/separatelly/separately/ s/accesible/accessible/ s/sythetic/synthetic/ s/enabed/enabled/ s/heurisitc/heuristic/ s/assocated/associated/ s/otherwides/otherwise/ s/specfied/specified/ s/seaching/searching/ s/hierachry/hierarchy/ s/internel/internal/ s/Thise/This/ Link: https://lkml.kernel.org/r/[email protected] Signed-off-by: Qiujun Huang <[email protected]> Signed-off-by: Steven Rostedt (VMware) <[email protected]>
2020-11-10ftrace: Remove unused varible 'ret'Alex Shi1-4/+2
'ret' in 2 functions are not used. and one of them is a void function. So remove them to avoid gcc warning: kernel/trace/ftrace.c:4166:6: warning: variable ‘ret’ set but not used [-Wunused-but-set-variable] kernel/trace/ftrace.c:5571:6: warning: variable ‘ret’ set but not used [-Wunused-but-set-variable] Link: https://lkml.kernel.org/r/[email protected] Signed-off-by: Alex Shi <[email protected]> Signed-off-by: Steven Rostedt (VMware) <[email protected]>
2020-11-10ring-buffer: Add recording of ring buffer recursion into recursed_functionsSteven Rostedt (VMware)2-1/+25
Add a new config RING_BUFFER_RECORD_RECURSION that will place functions that recurse from the ring buffer into the ftrace recused_functions file. Signed-off-by: Steven Rostedt (VMware) <[email protected]>
2020-11-10fgraph: Make overruns 4 bytes in graph stack structureSteven Rostedt (VMware)2-3/+3
Inspecting the data structures of the function graph tracer, I found that the overrun value is unsigned long, which is 8 bytes on a 64 bit machine, and not only that, the depth is an int (4 bytes). The overrun can be simply an unsigned int (4 bytes) and pack the ftrace_graph_ret structure better. The depth is moved up next to the func, as it is used more often with func, and improves cache locality. Signed-off-by: Steven Rostedt (VMware) <[email protected]>
2020-11-10rcu: Don't invoke try_invoke_on_locked_down_task() with irqs disabledPaul E. McKenney1-5/+17
The try_invoke_on_locked_down_task() function requires that interrupts be enabled, but it is called with interrupts disabled from rcu_print_task_stall(), resulting in an "IRQs not enabled as expected" diagnostic. This commit therefore updates rcu_print_task_stall() to accumulate a list of the first few tasks while holding the current leaf rcu_node structure's ->lock, then releases that lock and only then uses try_invoke_on_locked_down_task() to attempt to obtain per-task detailed information. Of course, as soon as ->lock is released, the task might exit, so the get_task_struct() function is used to prevent the task structure from going away in the meantime. Link: https://lore.kernel.org/lkml/[email protected]/ Fixes: 5bef8da66a9c ("rcu: Add per-task state to RCU CPU stall warnings") Reported-by: [email protected] Reported-by: [email protected] Tested-by: Sebastian Andrzej Siewior <[email protected]> Signed-off-by: Paul E. McKenney <[email protected]>
2020-11-10bpf: Load and verify kernel module BTFsAndrii Nakryiko3-1/+227
Add kernel module listener that will load/validate and unload module BTF. Module BTFs gets ID generated for them, which makes it possible to iterate them with existing BTF iteration API. They are given their respective module's names, which will get reported through GET_OBJ_INFO API. They are also marked as in-kernel BTFs for tooling to distinguish them from user-provided BTFs. Also, similarly to vmlinux BTF, kernel module BTFs are exposed through sysfs as /sys/kernel/btf/<module-name>. This is convenient for user-space tools to inspect module BTF contents and dump their types with existing tools: [vmuser@archvm bpf]$ ls -la /sys/kernel/btf total 0 drwxr-xr-x 2 root root 0 Nov 4 19:46 . drwxr-xr-x 13 root root 0 Nov 4 19:46 .. ... -r--r--r-- 1 root root 888 Nov 4 19:46 irqbypass -r--r--r-- 1 root root 100225 Nov 4 19:46 kvm -r--r--r-- 1 root root 35401 Nov 4 19:46 kvm_intel -r--r--r-- 1 root root 120 Nov 4 19:46 pcspkr -r--r--r-- 1 root root 399 Nov 4 19:46 serio_raw -r--r--r-- 1 root root 4094095 Nov 4 19:46 vmlinux Signed-off-by: Andrii Nakryiko <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Reviewed-by: Greg Kroah-Hartman <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2020-11-10bpf: Assign ID to vmlinux BTF and return extra info for BTF in GET_OBJ_INFOAndrii Nakryiko1-3/+40
Allocate ID for vmlinux BTF. This makes it visible when iterating over all BTF objects in the system. To allow distinguishing vmlinux BTF (and later kernel module BTF) from user-provided BTFs, expose extra kernel_btf flag, as well as BTF name ("vmlinux" for vmlinux BTF, will equal to module's name for module BTF). We might want to later allow specifying BTF name for user-provided BTFs as well, if that makes sense. But currently this is reserved only for in-kernel BTFs. Having in-kernel BTFs exposed IDs will allow to extend BPF APIs that require in-kernel BTF type with ability to specify BTF types from kernel modules, not just vmlinux BTF. This will be implemented in a follow up patch set for fentry/fexit/fmod_ret/lsm/etc. Signed-off-by: Andrii Nakryiko <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Acked-by: Song Liu <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2020-11-10bpf: Add in-kernel split BTF supportAndrii Nakryiko1-52/+119
Adjust in-kernel BTF implementation to support a split BTF mode of operation. Changes are mostly mirroring libbpf split BTF changes, with the exception of start_id being 0 for in-kernel implementation due to simpler read-only mode. Otherwise, for split BTF logic, most of the logic of jumping to base BTF, where necessary, is encapsulated in few helper functions. Type numbering and string offset in a split BTF are logically continuing where base BTF ends, so most of the high-level logic is kept without changes. Type verification and size resolution is only doing an added resolution of new split BTF types and relies on already cached size and type resolution results in the base BTF. Signed-off-by: Andrii Nakryiko <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Acked-by: Song Liu <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2020-11-10PM: EM: update the comments related to power scaleLukasz Luba1-1/+1
The Energy Model supports power values expressed in milli-Watts or in an 'abstract scale'. Update the related comments is the code to reflect that state. Reviewed-by: Quentin Perret <[email protected]> Signed-off-by: Lukasz Luba <[email protected]> Signed-off-by: Rafael J. Wysocki <[email protected]>
2020-11-10PM: EM: Add a flag indicating units of power values in Energy ModelLukasz Luba1-1/+23
There are different platforms and devices which might use different scale for the power values. Kernel sub-systems might need to check if all Energy Model (EM) devices are using the same scale. Address that issue and store the information inside EM for each device. Thanks to that they can be easily compared and proper action triggered. Suggested-by: Daniel Lezcano <[email protected]> Reviewed-by: Quentin Perret <[email protected]> Signed-off-by: Lukasz Luba <[email protected]> Signed-off-by: Rafael J. Wysocki <[email protected]>
2020-11-10Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds1-1/+4
Pull core dump fix from Al Viro: "Fix for multithreaded coredump playing fast and loose with getting registers of secondary threads; if a secondary gets caught in the middle of exit(2), the conditition it will be stopped in for dumper to examine might be unusual enough for things to go wrong. Quite a few architectures are fine with that, but some are not." * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: don't dump the threads that had been already exiting when zapped.
2020-11-10PM: ACPI: reboot: Use S5 for rebootKai-Heng Feng1-0/+2
After reboot, it's not possible to use hotkeys to enter BIOS setup and boot menu on some HP laptops. BIOS folks identified the root cause is the missing _PTS call, and BIOS is expecting _PTS to do proper reset. Using S5 for reboot is default behavior under Windows, "A full shutdown (S5) occurs when a system restart is requested" [1], so let's do the same here. [1] https://docs.microsoft.com/en-us/windows/win32/power/system-power-states Signed-off-by: Kai-Heng Feng <[email protected]> [ rjw: Subject edit ] Signed-off-by: Rafael J. Wysocki <[email protected]>
2020-11-10sched/fair: Dissociate wakeup decisions from SD flag valueValentin Schneider1-3/+2
The CFS wakeup code will only ever go through EAS / its fast path on "regular" wakeups (i.e. not on forks or execs). These are currently gated by a check against 'sd_flag', which would be SD_BALANCE_WAKE at wakeup. However, we now have a flag that explicitly tells us whether a wakeup is a "regular" one, so hinge those conditions on that flag instead. Signed-off-by: Valentin Schneider <[email protected]> Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Link: https://lkml.kernel.org/r/[email protected]
2020-11-10sched: Remove select_task_rq()'s sd_flag parameterValentin Schneider7-15/+17
Only select_task_rq_fair() uses that parameter to do an actual domain search, other classes only care about what kind of wakeup is happening (fork, exec, or "regular") and thus just translate the flag into a wakeup type. WF_TTWU and WF_EXEC have just been added, use these along with WF_FORK to encode the wakeup types we care about. For select_task_rq_fair(), we can simply use the shiny new WF_flag : SD_flag mapping. Signed-off-by: Valentin Schneider <[email protected]> Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Link: https://lkml.kernel.org/r/[email protected]
2020-11-10sched: Add WF_TTWU, WF_EXEC wakeup flagsValentin Schneider1-7/+14
To remove the sd_flag parameter of select_task_rq(), we need another way of encoding wakeup types. There already is a WF_FORK flag, add the missing two. With that said, we still need an easy way to turn WF_foo into SD_bar (e.g. WF_TTWU into SD_BALANCE_WAKE). As suggested by Peter, let's make our lives easier and make them match exactly, and throw in some compile-time checks for good measure. Signed-off-by: Valentin Schneider <[email protected]> Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Link: https://lkml.kernel.org/r/[email protected]
2020-11-10sched/fair: Remove superfluous lock section in do_sched_cfs_slack_timer()Hui Su1-3/+0
Since ab93a4bc955b ("sched/fair: Remove distribute_running fromCFS bandwidth"), there is nothing to protect between raw_spin_lock_irqsave/store() in do_sched_cfs_slack_timer(). Signed-off-by: Hui Su <[email protected]> Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Reviewed-by: Phil Auld <[email protected]> Reviewed-by: Ben Segall <[email protected]> Link: https://lkml.kernel.org/r/20201030144621.GA96974@rlk
2020-11-10Merge branch 'sched/migrate-disable'Peter Zijlstra9-225/+923
2020-11-10sched: Comment affine_move_task()Valentin Schneider1-2/+79
Signed-off-by: Valentin Schneider <[email protected]> Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Link: https://lkml.kernel.org/r/[email protected]
2020-11-10sched: Deny self-issued __set_cpus_allowed_ptr() when migrate_disable()Valentin Schneider1-2/+11
migrate_disable(); set_cpus_allowed_ptr(current, {something excluding task_cpu(current)}); affine_move_task(); <-- never returns Signed-off-by: Valentin Schneider <[email protected]> Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Link: https://lkml.kernel.org/r/[email protected]
2020-11-10sched: Fix migrate_disable() vs rt/dl balancingPeter Zijlstra4-29/+162
In order to minimize the interference of migrate_disable() on lower priority tasks, which can be deprived of runtime due to being stuck below a higher priority task. Teach the RT/DL balancers to push away these higher priority tasks when a lower priority task gets selected to run on a freshly demoted CPU (pull). This adds migration interference to the higher priority task, but restores bandwidth to system that would otherwise be irrevocably lost. Without this it would be possible to have all tasks on the system stuck on a single CPU, each task preempted in a migrate_disable() section with a single high priority task running. This way we can still approximate running the M highest priority tasks on the system. Migrating the top task away is (ofcourse) still subject to migrate_disable() too, which means the lower task is subject to an interference equivalent to the worst case migrate_disable() section. Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Reviewed-by: Daniel Bristot de Oliveira <[email protected]> Link: https://lkml.kernel.org/r/[email protected]
2020-11-10sched, lockdep: Annotate ->pi_lock recursionPeter Zijlstra1-0/+15
There's a valid ->pi_lock recursion issue where the actual PI code tries to wake up the stop task. Make lockdep aware so it doesn't complain about this. Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Reviewed-by: Valentin Schneider <[email protected]> Reviewed-by: Daniel Bristot de Oliveira <[email protected]> Link: https://lkml.kernel.org/r/[email protected]
2020-11-10sched,rt: Use the full cpumask for balancingPeter Zijlstra4-8/+8
We want migrate_disable() tasks to get PULLs in order for them to PUSH away the higher priority task. Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Reviewed-by: Valentin Schneider <[email protected]> Reviewed-by: Daniel Bristot de Oliveira <[email protected]> Link: https://lkml.kernel.org/r/[email protected]
2020-11-10sched,rt: Use cpumask_any*_distribute()Peter Zijlstra2-6/+6
Replace a bunch of cpumask_any*() instances with cpumask_any*_distribute(), by injecting this little bit of random in cpu selection, we reduce the chance two competing balance operations working off the same lowest_mask pick the same CPU. Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Reviewed-by: Valentin Schneider <[email protected]> Reviewed-by: Daniel Bristot de Oliveira <[email protected]> Link: https://lkml.kernel.org/r/[email protected]
2020-11-10sched/core: Make migrate disable and CPU hotplug cooperativeThomas Gleixner2-6/+34
On CPU unplug tasks which are in a migrate disabled region cannot be pushed to a different CPU until they returned to migrateable state. Account the number of tasks on a runqueue which are in a migrate disabled section and make the hotplug wait mechanism respect that. Signed-off-by: Thomas Gleixner <[email protected]> Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Reviewed-by: Valentin Schneider <[email protected]> Reviewed-by: Daniel Bristot de Oliveira <[email protected]> Link: https://lkml.kernel.org/r/[email protected]
2020-11-10sched: Fix migrate_disable() vs set_cpus_allowed_ptr()Peter Zijlstra1-30/+206
Concurrent migrate_disable() and set_cpus_allowed_ptr() has interesting features. We rely on set_cpus_allowed_ptr() to not return until the task runs inside the provided mask. This expectation is exported to userspace. This means that any set_cpus_allowed_ptr() caller must wait until migrate_enable() allows migrations. At the same time, we don't want migrate_enable() to schedule, due to patterns like: preempt_disable(); migrate_disable(); ... migrate_enable(); preempt_enable(); And: raw_spin_lock(&B); spin_unlock(&A); this means that when migrate_enable() must restore the affinity mask, it cannot wait for completion thereof. Luck will have it that that is exactly the case where there is a pending set_cpus_allowed_ptr(), so let that provide storage for the async stop machine. Much thanks to Valentin who used TLA+ most effective and found lots of 'interesting' cases. Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Reviewed-by: Valentin Schneider <[email protected]> Reviewed-by: Daniel Bristot de Oliveira <[email protected]> Link: https://lkml.kernel.org/r/[email protected]
Powered by cgit, Gruvboxed by Blaster4385.