| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
cgroup_calc_subtree_ss_mask() currently takes @cgrp and
@subtree_control. @cgrp is used for two purposes - to decide whether
it's for default hierarchy and the mask of available subsystems. The
former doesn't matter as the results are the same regardless. The
latter can be specified directly through a subsystem mask.
This patch makes cgroup_calc_subtree_ss_mask() perform the same
calculations for both default and legacy hierarchies and take
@this_ss_mask for available subsystems. @cgrp is no longer used and
dropped. This is to allow using the function in contexts where
available controllers can't be decided from the cgroup.
v2: cgroup_refres_subtree_ss_mask() is removed by a previous patch.
Updated accordingly.
Signed-off-by: Tejun Heo <[email protected]>
Acked-by: Zefan Li <[email protected]>
|
|
rebind_subsystem() open codes quite a bit of css and interface file
manipulations. It tries to be fail-safe but doesn't quite achieve it.
It can be greatly simplified by using the new css management helpers.
This patch reimplements rebind_subsytsems() using
cgroup_apply_control() and friends.
* The half-baked rollback on file creation failure is dropped. It is
an extremely cold path, failure isn't critical, and, aside from
kernel bugs, the only reason it can fail is memory allocation
failure which pretty much doesn't happen for small allocations.
* As cgroup_apply_control_disable() is now used to clean up root
cgroup on rebind, make sure that it doesn't end up killing root
csses.
* All callers of rebind_subsystems() are updated to use
cgroup_lock_and_drain_offline() as the apply_control functions
require drained subtree.
* This leaves cgroup_refresh_subtree_ss_mask() without any user.
Removed.
* css_populate_dir() and css_clear_dir() no longer needs
@cgrp_override parameter. Dropped.
* While at it, add WARN_ON() to rebind_subsystem() calls which are
expected to always succeed just in case.
While the rules visible to userland aren't changed, this
reimplementation not only simplifies rebind_subsystems() but also
allows it to disable and enable csses recursively. This can be used
to implement more flexible rebinding.
Signed-off-by: Tejun Heo <[email protected]>
Acked-by: Zefan Li <[email protected]>
|
|
cgroup_create() manually updates control masks and creates child csses
which cgroup_mkdir() then manually populates. Both can be simplified
by using cgroup_apply_enable_control() and friends. The only catch is
that it calls css_populate_dir() with NULL cgroup->kn during
cgroup_create(). This is worked around by making the function noop on
NULL kn.
Signed-off-by: Tejun Heo <[email protected]>
Acked-by: Zefan Li <[email protected]>
|
|
cgroup_drain_offline() is used to wait for csses being offlined to
uninstall itself from cgroup->subsys[] array so that new csses can be
installed. The function's only user, cgroup_subtree_control_write(),
calls it after performing some checks and restarts the whole process
via restart_syscall() if draining has to release cgroup_mutex to wait.
This can be simplified by draining before other synchronized
operations so that there's nothing to restart. This patch converts
cgroup_drain_offline() to cgroup_lock_and_drain_offline() which
performs both locking and draining and updates cgroup_kn_lock_live()
use it instead of cgroup_mutex() if requested. This combined locking
and draining operations are easier to use and less error-prone.
While at it, add WARNs in control_apply functions which triggers if
the subtree isn't properly drained.
Signed-off-by: Tejun Heo <[email protected]>
Acked-by: Zefan Li <[email protected]>
|
|
cgroup_subtree_control_write()
Factor out cgroup_{apply|finalize}_control() so that control mask
update can be done in several simple steps. This patch doesn't
introduce behavior changes.
Signed-off-by: Tejun Heo <[email protected]>
Acked-by: Zefan Li <[email protected]>
|
|
While controllers are being enabled and disabled in
cgroup_subtree_control_write(), the original subsystem masks are
stashed in local variables so that they can be restored if the
operation fails in the middle.
This patch adds dedicated fields to struct cgroup to be used instead
of the local variables and implements functions to stash the current
values, propagate the changes and restore them recursively. Combined
with the previous changes, this makes subsystem management operations
fully recursive and modularlized. This will be used to expand cgroup
core functionalities.
While at it, remove now unused @css_enable and @css_disable from
cgroup_subtree_control_write().
Signed-off-by: Tejun Heo <[email protected]>
Acked-by: Zefan Li <[email protected]>
|
|
cgroup_apply_control_{disable|enable}() recursive
The three factored out css management operations -
cgroup_drain_offline() and cgroup_apply_control_{disable|enable}() -
only depend on the current state of the target cgroups and idempotent
and thus can be easily made to operate on the subtree instead of the
immediate children.
This patch introduces the iterators which walk live subtree and
converts the three functions to operate on the subtree including self
instead of the children. While this leads to spurious walking and be
slightly more expensive, it will allow them to be used for wider scope
of operations.
Note that cgroup_drain_offline() now tests for whether a css is dying
before trying to drain it. This is to avoid trying to drain live
csses as there can be mix of live and dying csses in a subtree unlike
children of the same parent.
Signed-off-by: Tejun Heo <[email protected]>
Acked-by: Zefan Li <[email protected]>
|
|
cgroup_subtree_control_write()
Factor out css enabling and showing into cgroup_apply_control_enable().
* Nest subsystem walk inside child walk. The child walk will later be
converted to subtree walk which is a bit more expensive.
* Instead of operating on the differential masks @css_enable, simply
enable or show csses according to the current cgroup_control() and
cgroup_ss_mask(). This leads to the same result and is simpler and
more robust.
Signed-off-by: Tejun Heo <[email protected]>
Acked-by: Zefan Li <[email protected]>
|
|
cgroup_subtree_control_write()
Factor out css disabling and hiding into cgroup_apply_control_disable().
* Nest subsystem walk inside child walk. The child walk will later be
converted to subtree walk which is a bit more expensive.
* Instead of operating on the differential masks @css_enable and
@css_disable, simply disable or hide csses according to the current
cgroup_control() and cgroup_ss_mask(). This leads to the same
result and is simpler and more robust.
* This allows error handling path to share the same code.
Signed-off-by: Tejun Heo <[email protected]>
Acked-by: Zefan Li <[email protected]>
|
|
Factor out async css offline draining into cgroup_drain_offline().
* Nest subsystem walk inside child walk. The child walk will later be
converted to subtree walk which is a bit more expensive.
* Relocate the draining above subsystem mask preparation, which
doesn't create any behavior differences but helps further
refactoring.
Signed-off-by: Tejun Heo <[email protected]>
Acked-by: Zefan Li <[email protected]>
|
|
When a controller is enabled and visible on a non-root cgroup is
determined by subtree_control and subtree_ss_mask of the parent
cgroup. For a root cgroup, by the type of the hierarchy and which
controllers are attached to it. Deciding the above on each usage is
fragile and unnecessarily complicates the users.
This patch introduces cgroup_control() and cgroup_ss_mask() which
calculate and return the [visibly] enabled subsyste mask for the
specified cgroup and conver the existing usages.
* cgroup_e_css() is restructured for simplicity.
* cgroup_calc_subtree_ss_mask() and cgroup_subtree_control_write() no
longer need to distinguish root and non-root cases.
* With cgroup_control(), cgroup_controllers_show() can now handle both
root and non-root cases. cgroup_root_controllers_show() is removed.
v2: cgroup_control() updated to yield the correct result on v1
hierarchies too. cgroup_subtree_control_write() converted.
Signed-off-by: Tejun Heo <[email protected]>
Acked-by: Zefan Li <[email protected]>
|
|
We're in the process of refactoring cgroup and css management paths to
separate them out to eventually allow cgroups which aren't visible
through cgroup fs. This patch factors out cgroup_create() out of
cgroup_mkdir(). cgroup_create() contains all internal object creation
and initialization. cgroup_mkdir() uses cgroup_create() to create the
internal cgroup and adds interface directory and file creation.
This patch doesn't cause any behavior differences.
Signed-off-by: Tejun Heo <[email protected]>
Acked-by: Zefan Li <[email protected]>
|
|
Currently, operations to initialize internal objects and create
interface directory and files are intermixed in cgroup_mkdir(). We're
in the process of refactoring cgroup and css management paths to
separate them out to eventually allow cgroups which aren't visible
through cgroup fs.
This patch reorders operations inside cgroup_mkdir() so that interface
directory and file handling comes after internal object
initialization. This will enable further refactoring.
Signed-off-by: Tejun Heo <[email protected]>
Acked-by: Zefan Li <[email protected]>
|
|
Currently, whether a css (cgroup_subsys_state) has its interface files
created is not tracked and assumed to change together with the owning
cgroup's lifecycle. cgroup directory and interface creation is being
separated out from internal object creation to help refactoring and
eventually allow cgroups which are not visible through cgroupfs.
This patch adds CSS_VISIBLE to track whether a css has its interface
files created and perform management operations only when necessary
which helps decoupling interface file handling from internal object
lifecycle. After this patch, all css interface file management
functions can be called regardless of the current state and will
achieve the expected result.
Signed-off-by: Tejun Heo <[email protected]>
Acked-by: Zefan Li <[email protected]>
|
|
Currently, interface files are created when a css is created depending
on whether @visible is set. This patch separates out the two into
separate steps to help code refactoring and eventually allow cgroups
which aren't visible through cgroup fs.
Move css_populate_dir() out of create_css() and drop @visible. While
at it, rename the function to css_create() for consistency.
Signed-off-by: Tejun Heo <[email protected]>
Acked-by: Zefan Li <[email protected]>
|
|
During task migration, tasks may transfer between two css_sets which
are associated with the same cgroup. If those tasks are the only
tasks in the cgroup, this currently triggers a spurious de-populated
event on the cgroup.
Fix it by bumping up populated count before bumping it down during
migration to ensure that it doesn't reach zero spuriously.
Signed-off-by: Tejun Heo <[email protected]>
Acked-by: Zefan Li <[email protected]>
|
|
css_sets are hashed by their subsys[] contents and in cgroup_init()
init_css_set is hashed early, before subsystem inits, when all entries
in its subsys[] are NULL, so that cgroup_dfl_root initialization can
find and link to it. As subsystems are initialized,
init_css_set.subsys[] is filled up but the hashing is never updated
making init_css_set hashed in the wrong place. While incorrect, this
doesn't cause a critical failure as css_set management code would
create an identical css_set dynamically.
Fix it by rehashing init_css_set after subsystems are initialized.
While at it, drop unnecessary @key local variable.
Signed-off-by: Tejun Heo <[email protected]>
Acked-by: Zefan Li <[email protected]>
|
|
Revert commits:
a6e707ddbdf1: KVM: arm/arm64: timer: Switch to CLOCK_MONOTONIC_RAW
9006a01829a5: hrtimer: Catch illegal clockids
9c808765e88e: hrtimer: Add support for CLOCK_MONOTONIC_RAW
Marc found out, that there are fundamental issues with that patch series
because __hrtimer_get_next_event() and hrtimer_forward() need support for
CLOCK_MONOTONIC_RAW. Nothing which is easily fixed, so revert the whole lot.
Reported-by: Marc Zyngier <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Thomas Gleixner <[email protected]>
|
|
Paul noticed that the conversion of the death reporting introduced a race
where the outgoing cpu might be delayed after waking the controll processor,
so it might not be able to call rcu_report_dead() before being physically
removed, leading to RCU stalls.
We cant call complete after rcu_report_dead(), so instead of going back to
busy polling, simply issue a function call to do the completion.
Fixes: 27d50c7eeb0f "rcu: Make CPU_DYING_IDLE an explicit call"
Reported-by: Paul E. McKenney <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Thomas Gleixner <[email protected]>
Acked-by: Peter Zijlstra <[email protected]>
|
|
Another representative use case of time sync and the correlated
clocksource (in addition to PTP noted above) is PTP synchronized
audio.
In a streaming application, as an example, samples will be sent and/or
received by multiple devices with a presentation time that is in terms
of the PTP master clock. Synchronizing the audio output on these
devices requires correlating the audio clock with the PTP master
clock. The more precise this correlation is, the better the audio
quality (i.e. out of sync audio sounds bad).
From an application standpoint, to correlate the PTP master clock with
the audio device clock, the system clock is used as a intermediate
timebase. The transforms such an application would perform are:
System Clock <-> Audio clock
System Clock <-> Network Device Clock [<-> PTP Master Clock]
Modern Intel platforms can perform a more accurate cross timestamp in
hardware (ART,audio device clock). The audio driver requires
ART->system time transforms -- the same as required for the network
driver. These platforms offload audio processing (including
cross-timestamps) to a DSP which to ensure uninterrupted audio
processing, communicates and response to the host only once every
millsecond. As a result is takes up to a millisecond for the DSP to
receive a request, the request is processed by the DSP, the audio
output hardware is polled for completion, the result is copied into
shared memory, and the host is notified. All of these operation occur
on a millisecond cadence. This transaction requires about 2 ms, but
under heavier workloads it may take up to 4 ms.
Adding a history allows these slow devices the option of providing an
ART value outside of the current interval. In this case, the callback
provided is an accessor function for the previously obtained counter
value. If get_system_device_crosststamp() receives a counter value
previous to cycle_last, it consults the history provided as an
argument in history_ref and interpolates the realtime and monotonic
raw system time using the provided counter value. If there are any
clock discontinuities, e.g. from calling settimeofday(), the monotonic
raw time is interpolated in the usual way, but the realtime clock time
is adjusted by scaling the monotonic raw adjustment.
When an accessor function is used a history argument *must* be
provided. The history is initialized using ktime_get_snapshot() and
must be called before the counter values are read.
Cc: Prarit Bhargava <[email protected]>
Cc: Richard Cochran <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Andy Lutomirski <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Reviewed-by: Thomas Gleixner <[email protected]>
Signed-off-by: Christopher S. Hall <[email protected]>
[jstultz: Fixed up cycles_t/cycle_t type confusion]
Signed-off-by: John Stultz <[email protected]>
|
|
synchronization
ACKNOWLEDGMENT: cross timestamp code was developed by Thomas Gleixner
<[email protected]>. It has changed considerably and any mistakes are
mine.
The precision with which events on multiple networked systems can be
synchronized using, as an example, PTP (IEEE 1588, 802.1AS) is limited
by the precision of the cross timestamps between the system clock and
the device (timestamp) clock. Precision here is the degree of
simultaneity when capturing the cross timestamp.
Currently the PTP cross timestamp is captured in software using the
PTP device driver ioctl PTP_SYS_OFFSET. Reads of the device clock are
interleaved with reads of the realtime clock. At best, the precision
of this cross timestamp is on the order of several microseconds due to
software latencies. Sub-microsecond precision is required for
industrial control and some media applications. To achieve this level
of precision hardware supported cross timestamping is needed.
The function get_device_system_crosstimestamp() allows device drivers
to return a cross timestamp with system time properly scaled to
nanoseconds. The realtime value is needed to discipline that clock
using PTP and the monotonic raw value is used for applications that
don't require a "real" time, but need an unadjusted clock time. The
get_device_system_crosstimestamp() code calls back into the driver to
ensure that the system counter is within the current timekeeping
update interval.
Modern Intel hardware provides an Always Running Timer (ART) which is
exactly related to TSC through a known frequency ratio. The ART is
routed to devices on the system and is used to precisely and
simultaneously capture the device clock with the ART.
Cc: Prarit Bhargava <[email protected]>
Cc: Richard Cochran <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Andy Lutomirski <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Reviewed-by: Thomas Gleixner <[email protected]>
Signed-off-by: Christopher S. Hall <[email protected]>
[jstultz: Reworked to remove extra structures and simplify calling]
Signed-off-by: John Stultz <[email protected]>
|
|
The code in ktime_get_snapshot() is a superset of the code in
ktime_get_raw_and_real() code. Further, ktime_get_raw_and_real() is
called only by the PPS code, pps_get_ts(). Consolidate the
pps_get_ts() code into a single function calling ktime_get_snapshot()
and eliminate ktime_get_raw_and_real(). A side effect of this is that
the raw and real results of pps_get_ts() correspond to exactly the
same clock cycle. Previously these values represented separate reads
of the system clock.
Cc: Prarit Bhargava <[email protected]>
Cc: Richard Cochran <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Andy Lutomirski <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Reviewed-by: Thomas Gleixner <[email protected]>
Signed-off-by: Christopher S. Hall <[email protected]>
Signed-off-by: John Stultz <[email protected]>
|
|
In the current timekeeping code there isn't any interface to
atomically capture the current relationship between the system counter
and system time. ktime_get_snapshot() returns this triple (counter,
monotonic raw, realtime) in the system_time_snapshot struct.
Cc: Prarit Bhargava <[email protected]>
Cc: Richard Cochran <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Andy Lutomirski <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Reviewed-by: Thomas Gleixner <[email protected]>
Signed-off-by: Christopher S. Hall <[email protected]>
[jstultz: Moved structure definitions around to clean things up,
fixed cycles_t/cycle_t confusion.]
Signed-off-by: John Stultz <[email protected]>
|
|
The timekeeping code does not currently provide a way to translate
externally provided clocksource cycles to system time. The cycle count
is always provided by the result clocksource read() method internal to
the timekeeping code. The added function timekeeping_cycles_to_ns()
calculated a nanosecond value from a cycle count that can be added to
tk_read_base.base value yielding the current system time. This allows
clocksource cycle values external to the timekeeping code to provide a
cycle count that can be transformed to system time.
Cc: Prarit Bhargava <[email protected]>
Cc: Richard Cochran <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Andy Lutomirski <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Reviewed-by: Thomas Gleixner <[email protected]>
Signed-off-by: Christopher S. Hall <[email protected]>
Signed-off-by: John Stultz <[email protected]>
|
|
Instead of checking sched_clock_stable from the nohz subsystem to verify
its tick dependency, migrate it to the new mask in order to include it
to the all-in-one check.
Reviewed-by: Chris Metcalf <[email protected]>
Cc: Christoph Lameter <[email protected]>
Cc: Chris Metcalf <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Luiz Capitulino <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Rik van Riel <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Viresh Kumar <[email protected]>
Signed-off-by: Frederic Weisbecker <[email protected]>
|
|
Instead of providing asynchronous checks for the nohz subsystem to verify
posix cpu timers tick dependency, migrate the latter to the new mask.
In order to keep track of the running timers and expose the tick
dependency accordingly, we must probe the timers queuing and dequeuing
on threads and process lists.
Unfortunately it implies both task and signal level dependencies. We
should be able to further optimize this and merge all that on the task
level dependency, at the cost of a bit of complexity and may be overhead.
Reviewed-by: Chris Metcalf <[email protected]>
Cc: Christoph Lameter <[email protected]>
Cc: Chris Metcalf <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Luiz Capitulino <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Rik van Riel <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Viresh Kumar <[email protected]>
Signed-off-by: Frederic Weisbecker <[email protected]>
|
|
Instead of providing asynchronous checks for the nohz subsystem to verify
sched tick dependency, migrate sched to the new mask.
Everytime a task is enqueued or dequeued, we evaluate the state of the
tick dependency on top of the policy of the tasks in the runqueue, by
order of priority:
SCHED_DEADLINE: Need the tick in order to periodically check for runtime
SCHED_FIFO : Don't need the tick (no round-robin)
SCHED_RR : Need the tick if more than 1 task of the same priority
for round robin (simplified with checking if more than
one SCHED_RR task no matter what priority).
SCHED_NORMAL : Need the tick if more than 1 task for round-robin.
We could optimize that further with one flag per sched policy on the tick
dependency mask and perform only the checks relevant to the policy
concerned by an enqueue/dequeue operation.
Since the checks aren't based on the current task anymore, we could get
rid of the task switch hook but it's still needed for posix cpu
timers.
Reviewed-by: Chris Metcalf <[email protected]>
Cc: Christoph Lameter <[email protected]>
Cc: Chris Metcalf <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Luiz Capitulino <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Rik van Riel <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Viresh Kumar <[email protected]>
Signed-off-by: Frederic Weisbecker <[email protected]>
|
|
In order to evaluate the scheduler tick dependency without probing
context switches, we need to know how much SCHED_RR and SCHED_FIFO tasks
are enqueued as those policies don't have the same preemption
requirements.
To prepare for that, let's account SCHED_RR tasks, we'll be able to
deduce SCHED_FIFO tasks as well from it and the total RT tasks in the
runqueue.
Reviewed-by: Chris Metcalf <[email protected]>
Cc: Christoph Lameter <[email protected]>
Cc: Chris Metcalf <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Luiz Capitulino <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Rik van Riel <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Viresh Kumar <[email protected]>
Signed-off-by: Frederic Weisbecker <[email protected]>
|
|
Instead of providing asynchronous checks for the nohz subsystem to verify
perf event tick dependency, migrate perf to the new mask.
Perf needs the tick for two situations:
1) Freq events. We could set the tick dependency when those are
installed on a CPU context. But setting a global dependency on top of
the global freq events accounting is much easier. If people want that
to be optimized, we can still refine that on the per-CPU tick dependency
level. This patch dooesn't change the current behaviour anyway.
2) Throttled events: this is a per-cpu dependency.
Reviewed-by: Chris Metcalf <[email protected]>
Cc: Christoph Lameter <[email protected]>
Cc: Chris Metcalf <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Luiz Capitulino <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Rik van Riel <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Viresh Kumar <[email protected]>
Signed-off-by: Frederic Weisbecker <[email protected]>
|
|
It makes nohz tracing more lightweight, standard and easier to parse.
Examples:
user_loop-2904 [007] d..1 517.701126: tick_stop: success=1 dependency=NONE
user_loop-2904 [007] dn.1 518.021181: tick_stop: success=0 dependency=SCHED
posix_timers-6142 [007] d..1 1739.027400: tick_stop: success=0 dependency=POSIX_TIMER
user_loop-5463 [007] dN.1 1185.931939: tick_stop: success=0 dependency=PERF_EVENTS
Suggested-by: Peter Zijlstra <[email protected]>
Reviewed-by: Chris Metcalf <[email protected]>
Cc: Christoph Lameter <[email protected]>
Cc: Chris Metcalf <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Luiz Capitulino <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Rik van Riel <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Viresh Kumar <[email protected]>
Signed-off-by: Frederic Weisbecker <[email protected]>
|
|
The tick dependency is evaluated on every IRQ and context switch. This
consists is a batch of checks which determine whether it is safe to
stop the tick or not. These checks are often split in many details:
posix cpu timers, scheduler, sched clock, perf events.... each of which
are made of smaller details: posix cpu timer involves checking process
wide timers then thread wide timers. Perf involves checking freq events
then more per cpu details.
Checking these informations asynchronously every time we update the full
dynticks state bring avoidable overhead and a messy layout.
Let's introduce instead tick dependency masks: one for system wide
dependency (unstable sched clock, freq based perf events), one for CPU
wide dependency (sched, throttling perf events), and task/signal level
dependencies (posix cpu timers). The subsystems are responsible
for setting and clearing their dependency through a set of APIs that will
take care of concurrent dependency mask modifications and kick targets
to restart the relevant CPU tick whenever needed.
This new dependency engine stays beside the old one until all subsystems
having a tick dependency are converted to it.
Suggested-by: Thomas Gleixner <[email protected]>
Suggested-by: Peter Zijlstra <[email protected]>
Reviewed-by: Chris Metcalf <[email protected]>
Cc: Christoph Lameter <[email protected]>
Cc: Chris Metcalf <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Luiz Capitulino <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Rik van Riel <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Viresh Kumar <[email protected]>
Signed-off-by: Frederic Weisbecker <[email protected]>
|
|
Given that wq_worker_sleeping() could only be called for a
CPU it is running on, we do not need passing a CPU ID as an
argument.
Suggested-by: Oleg Nesterov <[email protected]>
Cc: Oleg Nesterov <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Signed-off-by: Alexander Gordeev <[email protected]>
Signed-off-by: Tejun Heo <[email protected]>
|
|
Make the RCU CPU_DYING_IDLE callback an explicit function call, so it gets
invoked at the proper place.
Signed-off-by: Thomas Gleixner <[email protected]>
Cc: [email protected]
Cc: Rik van Riel <[email protected]>
Cc: Rafael Wysocki <[email protected]>
Cc: "Srivatsa S. Bhat" <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Arjan van de Ven <[email protected]>
Cc: Sebastian Siewior <[email protected]>
Cc: Rusty Russell <[email protected]>
Cc: Steven Rostedt <[email protected]>
Cc: Oleg Nesterov <[email protected]>
Cc: Tejun Heo <[email protected]>
Cc: Andrew Morton <[email protected]>
Cc: Paul McKenney <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Paul Turner <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Thomas Gleixner <[email protected]>
|
|
Kill the busy spinning on the control side and just wait for the hotplugged
cpu to tell that it reached the dead state.
Signed-off-by: Thomas Gleixner <[email protected]>
Cc: [email protected]
Cc: Rik van Riel <[email protected]>
Cc: Rafael Wysocki <[email protected]>
Cc: "Srivatsa S. Bhat" <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Arjan van de Ven <[email protected]>
Cc: Sebastian Siewior <[email protected]>
Cc: Rusty Russell <[email protected]>
Cc: Steven Rostedt <[email protected]>
Cc: Oleg Nesterov <[email protected]>
Cc: Tejun Heo <[email protected]>
Cc: Andrew Morton <[email protected]>
Cc: Paul McKenney <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Paul Turner <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Thomas Gleixner <[email protected]>
|
|
Let the upcoming cpu kick the hotplug thread and let itself complete the
bringup. That way the controll side can just wait for the completion or later
when we made the hotplug machinery async not care at all.
Signed-off-by: Thomas Gleixner <[email protected]>
Cc: [email protected]
Cc: Rik van Riel <[email protected]>
Cc: Rafael Wysocki <[email protected]>
Cc: "Srivatsa S. Bhat" <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Arjan van de Ven <[email protected]>
Cc: Sebastian Siewior <[email protected]>
Cc: Rusty Russell <[email protected]>
Cc: Steven Rostedt <[email protected]>
Cc: Oleg Nesterov <[email protected]>
Cc: Tejun Heo <[email protected]>
Cc: Andrew Morton <[email protected]>
Cc: Paul McKenney <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Paul Turner <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Thomas Gleixner <[email protected]>
|
|
Let the hotplugged cpu invoke the setup/teardown callbacks
(CPU_ONLINE/CPU_DOWN_PREPARE) itself.
Signed-off-by: Thomas Gleixner <[email protected]>
Cc: [email protected]
Cc: Rik van Riel <[email protected]>
Cc: Rafael Wysocki <[email protected]>
Cc: "Srivatsa S. Bhat" <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Arjan van de Ven <[email protected]>
Cc: Sebastian Siewior <[email protected]>
Cc: Rusty Russell <[email protected]>
Cc: Steven Rostedt <[email protected]>
Cc: Oleg Nesterov <[email protected]>
Cc: Tejun Heo <[email protected]>
Cc: Andrew Morton <[email protected]>
Cc: Paul McKenney <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Paul Turner <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Thomas Gleixner <[email protected]>
|
|
In order to let the hotplugged cpu take care of the setup/teardown, we need a
seperate hotplug thread.
Signed-off-by: Thomas Gleixner <[email protected]>
Cc: [email protected]
Cc: Rik van Riel <[email protected]>
Cc: Rafael Wysocki <[email protected]>
Cc: "Srivatsa S. Bhat" <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Arjan van de Ven <[email protected]>
Cc: Sebastian Siewior <[email protected]>
Cc: Rusty Russell <[email protected]>
Cc: Steven Rostedt <[email protected]>
Cc: Oleg Nesterov <[email protected]>
Cc: Tejun Heo <[email protected]>
Cc: Andrew Morton <[email protected]>
Cc: Paul McKenney <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Paul Turner <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Thomas Gleixner <[email protected]>
|
|
We need that for running callbacks on the AP and the BP.
Signed-off-by: Thomas Gleixner <[email protected]>
Cc: [email protected]
Cc: Rik van Riel <[email protected]>
Cc: Rafael Wysocki <[email protected]>
Cc: "Srivatsa S. Bhat" <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Arjan van de Ven <[email protected]>
Cc: Sebastian Siewior <[email protected]>
Cc: Rusty Russell <[email protected]>
Cc: Steven Rostedt <[email protected]>
Cc: Oleg Nesterov <[email protected]>
Cc: Tejun Heo <[email protected]>
Cc: Andrew Morton <[email protected]>
Cc: Paul McKenney <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Paul Turner <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Thomas Gleixner <[email protected]>
|
|
Handle the smpboot threads in the state machine.
Signed-off-by: Thomas Gleixner <[email protected]>
Cc: [email protected]
Cc: Rik van Riel <[email protected]>
Cc: Rafael Wysocki <[email protected]>
Cc: "Srivatsa S. Bhat" <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Arjan van de Ven <[email protected]>
Cc: Sebastian Siewior <[email protected]>
Cc: Rusty Russell <[email protected]>
Cc: Steven Rostedt <[email protected]>
Cc: Oleg Nesterov <[email protected]>
Cc: Tejun Heo <[email protected]>
Cc: Andrew Morton <[email protected]>
Cc: Paul McKenney <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Paul Turner <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Thomas Gleixner <[email protected]>
|
|
Move the scheduler cpu online notifier part to the hotplug core. This is
anyway the highest priority callback and we need that functionality right now
for the next changes.
Signed-off-by: Thomas Gleixner <[email protected]>
Cc: [email protected]
Cc: Rik van Riel <[email protected]>
Cc: Rafael Wysocki <[email protected]>
Cc: "Srivatsa S. Bhat" <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Arjan van de Ven <[email protected]>
Cc: Sebastian Siewior <[email protected]>
Cc: Rusty Russell <[email protected]>
Cc: Steven Rostedt <[email protected]>
Cc: Oleg Nesterov <[email protected]>
Cc: Tejun Heo <[email protected]>
Cc: Andrew Morton <[email protected]>
Cc: Paul McKenney <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Paul Turner <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Thomas Gleixner <[email protected]>
|
|
Implement function which allow to setup/remove hotplug state callbacks.
The default behaviour for setup is to call the startup function for this state
for (or on) all cpus which have a hotplug state >= the installed state.
The default behaviour for removal is to call the teardown function for this
state for (or on) all cpus which have a hotplug state >= the installed state.
This includes rollback to the previous state in case of failure.
A special state is CPUHP_ONLINE_DYN. Its for dynamically registering a hotplug
callback pair. This is for drivers which have no dependencies to avoid that we
need to allocate CPUHP states for each of them
For both setup and remove helper functions are provided, which prevent the
core to issue the callbacks. This simplifies the conversion of existing
hotplug notifiers.
[ Dynamic registering implemented by Sebastian Siewior ]
Signed-off-by: Thomas Gleixner <[email protected]>
Cc: [email protected]
Cc: Rik van Riel <[email protected]>
Cc: Rafael Wysocki <[email protected]>
Cc: "Srivatsa S. Bhat" <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Arjan van de Ven <[email protected]>
Cc: Sebastian Siewior <[email protected]>
Cc: Rusty Russell <[email protected]>
Cc: Steven Rostedt <[email protected]>
Cc: Oleg Nesterov <[email protected]>
Cc: Tejun Heo <[email protected]>
Cc: Andrew Morton <[email protected]>
Cc: Paul McKenney <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Paul Turner <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Thomas Gleixner <[email protected]>
|
|
Make it possible to write a target state to the per cpu state file, so we can
switch between states.
Signed-off-by: Thomas Gleixner <[email protected]>
Cc: [email protected]
Cc: Rik van Riel <[email protected]>
Cc: Rafael Wysocki <[email protected]>
Cc: "Srivatsa S. Bhat" <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Arjan van de Ven <[email protected]>
Cc: Sebastian Siewior <[email protected]>
Cc: Rusty Russell <[email protected]>
Cc: Steven Rostedt <[email protected]>
Cc: Oleg Nesterov <[email protected]>
Cc: Tejun Heo <[email protected]>
Cc: Andrew Morton <[email protected]>
Cc: Paul McKenney <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Paul Turner <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Thomas Gleixner <[email protected]>
|
|
Add a sysfs interface so we can actually see in which state the cpus are in.
Signed-off-by: Thomas Gleixner <[email protected]>
Cc: [email protected]
Cc: Rik van Riel <[email protected]>
Cc: Rafael Wysocki <[email protected]>
Cc: "Srivatsa S. Bhat" <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Arjan van de Ven <[email protected]>
Cc: Sebastian Siewior <[email protected]>
Cc: Rusty Russell <[email protected]>
Cc: Steven Rostedt <[email protected]>
Cc: Oleg Nesterov <[email protected]>
Cc: Tejun Heo <[email protected]>
Cc: Andrew Morton <[email protected]>
Cc: Paul McKenney <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Paul Turner <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Thomas Gleixner <[email protected]>
|
|
We want to be able to bringup/teardown the cpu to a particular state. Add a
target argument to _cpu_up/down.
Signed-off-by: Thomas Gleixner <[email protected]>
Cc: [email protected]
Cc: Rik van Riel <[email protected]>
Cc: Rafael Wysocki <[email protected]>
Cc: "Srivatsa S. Bhat" <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Arjan van de Ven <[email protected]>
Cc: Sebastian Siewior <[email protected]>
Cc: Rusty Russell <[email protected]>
Cc: Steven Rostedt <[email protected]>
Cc: Oleg Nesterov <[email protected]>
Cc: Tejun Heo <[email protected]>
Cc: Andrew Morton <[email protected]>
Cc: Paul McKenney <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Paul Turner <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Thomas Gleixner <[email protected]>
|
|
Move the functions which need to run on the hotplugged processor into
a state machine array and let the code iterate through these functions.
In a later state, this will grow synchronization points between the
control processor and the hotplugged processor, so we can move the
various architecture implementations of the synchronizations to the
core.
Signed-off-by: Thomas Gleixner <[email protected]>
Cc: [email protected]
Cc: Rik van Riel <[email protected]>
Cc: Rafael Wysocki <[email protected]>
Cc: "Srivatsa S. Bhat" <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Arjan van de Ven <[email protected]>
Cc: Sebastian Siewior <[email protected]>
Cc: Rusty Russell <[email protected]>
Cc: Steven Rostedt <[email protected]>
Cc: Oleg Nesterov <[email protected]>
Cc: Tejun Heo <[email protected]>
Cc: Andrew Morton <[email protected]>
Cc: Paul McKenney <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Paul Turner <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Thomas Gleixner <[email protected]>
|
|
Move the split out steps into a callback array and let the cpu_up/down
code iterate through the array functions. For now most of the
callbacks are asymmetric to resemble the current hotplug maze.
Signed-off-by: Thomas Gleixner <[email protected]>
Cc: [email protected]
Cc: Rik van Riel <[email protected]>
Cc: Rafael Wysocki <[email protected]>
Cc: "Srivatsa S. Bhat" <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Arjan van de Ven <[email protected]>
Cc: Sebastian Siewior <[email protected]>
Cc: Rusty Russell <[email protected]>
Cc: Steven Rostedt <[email protected]>
Cc: Oleg Nesterov <[email protected]>
Cc: Tejun Heo <[email protected]>
Cc: Andrew Morton <[email protected]>
Cc: Paul McKenney <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Paul Turner <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Thomas Gleixner <[email protected]>
|
|
Split cpu_down in separate functions in preparation for state machine
conversion.
Signed-off-by: Thomas Gleixner <[email protected]>
Cc: [email protected]
Cc: Rik van Riel <[email protected]>
Cc: Rafael Wysocki <[email protected]>
Cc: "Srivatsa S. Bhat" <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Arjan van de Ven <[email protected]>
Cc: Sebastian Siewior <[email protected]>
Cc: Rusty Russell <[email protected]>
Cc: Steven Rostedt <[email protected]>
Cc: Oleg Nesterov <[email protected]>
Cc: Tejun Heo <[email protected]>
Cc: Andrew Morton <[email protected]>
Cc: Paul McKenney <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Paul Turner <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Thomas Gleixner <[email protected]>
|
|
Split out into separate functions, so we can convert it to a state machine.
Signed-off-by: Thomas Gleixner <[email protected]>
Cc: [email protected]
Cc: Rik van Riel <[email protected]>
Cc: Rafael Wysocki <[email protected]>
Cc: "Srivatsa S. Bhat" <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Arjan van de Ven <[email protected]>
Cc: Sebastian Siewior <[email protected]>
Cc: Rusty Russell <[email protected]>
Cc: Steven Rostedt <[email protected]>
Cc: Oleg Nesterov <[email protected]>
Cc: Tejun Heo <[email protected]>
Cc: Andrew Morton <[email protected]>
Cc: Paul McKenney <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Paul Turner <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Thomas Gleixner <[email protected]>
|
|
There are only a few callbacks which really care about FROZEN
vs. !FROZEN. No need to have extra states for this.
Publish the frozen state in an extra variable which is updated under
the hotplug lock and let the users interested deal with it w/o
imposing that extra state checks on everyone.
Signed-off-by: Thomas Gleixner <[email protected]>
Cc: [email protected]
Cc: Rik van Riel <[email protected]>
Cc: Rafael Wysocki <[email protected]>
Cc: "Srivatsa S. Bhat" <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Arjan van de Ven <[email protected]>
Cc: Sebastian Siewior <[email protected]>
Cc: Rusty Russell <[email protected]>
Cc: Steven Rostedt <[email protected]>
Cc: Oleg Nesterov <[email protected]>
Cc: Tejun Heo <[email protected]>
Cc: Andrew Morton <[email protected]>
Cc: Paul McKenney <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Paul Turner <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Thomas Gleixner <[email protected]>
|
|
An associated css can be around for quite a while after a cgroup
directory has been removed. In general, it makes sense to reset it to
defaults so as not to worry about any remnants. For instance, memory
cgroup needs to reset memory.low, otherwise pages charged to a dead
cgroup might never get reclaimed. There's ->css_reset callback, which
would fit perfectly for the purpose. Currently, it's only called when a
subsystem is disabled in the unified hierarchy and there are other
subsystems dependant on it. Let's call it on css destruction as well.
Suggested-by: Johannes Weiner <[email protected]>
Signed-off-by: Vladimir Davydov <[email protected]>
Signed-off-by: Tejun Heo <[email protected]>
|