| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
While browsing through ChromeOS crash reports, I found one with an
allocation failure that looked like this:
chrome: page allocation failure: order:7,
mode:0x40dc0(GFP_KERNEL|__GFP_COMP|__GFP_ZERO),
nodemask=(null),cpuset=urgent,mems_allowed=0
CPU: 7 PID: 3295 Comm: chrome Not tainted
5.15.133-20574-g8044615ac35c #1 (HASH:1162 1)
Hardware name: Google Lazor (rev3 - 8) with KB Backlight (DT)
Call trace:
...
warn_alloc+0x104/0x174
__alloc_pages+0x5f0/0x6e4
kmalloc_order+0x44/0x98
kmalloc_order_trace+0x34/0x124
__kmalloc+0x228/0x36c
__regset_get+0x68/0xcc
regset_get_alloc+0x1c/0x28
elf_core_dump+0x3d8/0xd8c
do_coredump+0xeb8/0x1378
get_signal+0x14c/0x804
...
An order 7 allocation is (1 << 7) contiguous pages, or 512K. It's not
a surprise that this allocation failed on a system that's been running
for a while.
More digging showed that it was fairly easy to see the order 7
allocation by just sending a SIGQUIT to chrome (or other processes) to
generate a core dump. The actual amount being allocated was 279,584
bytes and it was for "core_note_type" NT_ARM_SVE.
There was quite a bit of discussion [1] on the mailing lists in
response to my v1 patch attempting to switch to vmalloc. The overall
conclusion was that we could likely reduce the 279,584 byte allocation
by quite a bit and Mark Brown has sent a patch to that effect [2].
However even with the 279,584 byte allocation gone there are still
65,552 byte allocations. These are just barely more than the 65,536
bytes and thus would require an order 5 allocation.
An order 5 allocation is still something to avoid unless necessary and
nothing needs the memory here to be contiguous. Change the allocation
to kvzalloc() which should still be efficient for small allocations
but doesn't force the memory subsystem to work hard (and maybe fail)
at getting a large contiguous chunk.
[1] https://lore.kernel.org/r/20240201171159.1.Id9ad163b60d21c9e56c2d686b0cc9083a8ba7924@changeid
[2] https://lore.kernel.org/r/20240203-arm64-sve-ptrace-regset-size-v1-1-2c3ba1386b9e@kernel.org
Link: https://lkml.kernel.org/r/20240205092626.v2.1.Id9ad163b60d21c9e56c2d686b0cc9083a8ba7924@changeid
Signed-off-by: Douglas Anderson <[email protected]>
Reviewed-by: Catalin Marinas <[email protected]>
Cc: Al Viro <[email protected]>
Cc: Christian Brauner <[email protected]>
Cc: Dave Martin <[email protected]>
Cc: Eric Biederman <[email protected]>
Cc: Jan Kara <[email protected]>
Cc: Kees Cook <[email protected]>
Cc: Mark Brown <[email protected]>
Cc: Matthew Wilcox (Oracle) <[email protected]>
Cc: Oleg Nesterov <[email protected]>
Cc: Will Deacon <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Nowadays, we call it "GUP-fast", the external interface includes functions
like "get_user_pages_fast()", and we renamed all internal functions to
reflect that as well.
Let's make the config option reflect that.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: David Hildenbrand <[email protected]>
Reviewed-by: Mike Rapoport (IBM) <[email protected]>
Reviewed-by: Jason Gunthorpe <[email protected]>
Reviewed-by: John Hubbard <[email protected]>
Cc: Peter Xu <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
The mm_struct contains a function pointer *get_unmapped_area(), which is
set to either arch_get_unmapped_area() or arch_get_unmapped_area_topdown()
during the initialization of the mm.
Since the function pointer only ever points to two functions that are
named the same across all arch's, a function pointer is not really
required. In addition future changes will want to add versions of the
functions that take additional arguments. So to save a pointers worth of
bytes in mm_struct, and prevent adding additional function pointers to
mm_struct in future changes, remove it and keep the information about
which get_unmapped_area() to use in a flag.
Add the new flag to MMF_INIT_MASK so it doesn't get clobbered on fork by
mmf_init_flags(). Most MM flags get clobbered on fork. In the
pre-existing behavior mm->get_unmapped_area() would get copied to the new
mm in dup_mm(), so not clobbering the flag preserves the existing behavior
around inheriting the topdown-ness.
Introduce a helper, mm_get_unmapped_area(), to easily convert code that
refers to the old function pointer to instead select and call either
arch_get_unmapped_area() or arch_get_unmapped_area_topdown() based on the
flag. Then drop the mm->get_unmapped_area() function pointer. Leave the
get_unmapped_area() pointer in struct file_operations alone. The main
purpose of this change is to reorganize in preparation for future changes,
but it also converts the calls of mm->get_unmapped_area() from indirect
branches into a direct ones.
The stress-ng bigheap benchmark calls realloc a lot, which calls through
get_unmapped_area() in the kernel. On x86, the change yielded a ~1%
improvement there on a retpoline config.
In testing a few x86 configs, removing the pointer unfortunately didn't
result in any actual size reductions in the compiled layout of mm_struct.
But depending on compiler or arch alignment requirements, the change could
shrink the size of mm_struct.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Rick Edgecombe <[email protected]>
Acked-by: Dave Hansen <[email protected]>
Acked-by: Liam R. Howlett <[email protected]>
Reviewed-by: Kirill A. Shutemov <[email protected]>
Acked-by: Alexei Starovoitov <[email protected]>
Cc: Dan Williams <[email protected]>
Cc: Andy Lutomirski <[email protected]>
Cc: Aneesh Kumar K.V <[email protected]>
Cc: Borislav Petkov (AMD) <[email protected]>
Cc: Christophe Leroy <[email protected]>
Cc: Deepak Gupta <[email protected]>
Cc: Guo Ren <[email protected]>
Cc: Helge Deller <[email protected]>
Cc: H. Peter Anvin (Intel) <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: "James E.J. Bottomley" <[email protected]>
Cc: Kees Cook <[email protected]>
Cc: Mark Brown <[email protected]>
Cc: Michael Ellerman <[email protected]>
Cc: Naveen N. Rao <[email protected]>
Cc: Nicholas Piggin <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Also remove mm_get_huge_zero_page() now it has no users.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Matthew Wilcox (Oracle) <[email protected]>
Reviewed-by: David Hildenbrand <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Reclaim the Slab page flag by using a spare bit in PageType. We are
perennially short of page flags for various purposes, and now that the
original SLAB allocator has been retired, SLUB does not use the
mapcount/page_type field. This lets us remove a number of special cases
for ignoring mapcount on Slab pages.
[[email protected]: update vmcoreinfo]
Link: https://lkml.kernel.org/r/[email protected]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Matthew Wilcox (Oracle) <[email protected]>
Acked-by: David Hildenbrand <[email protected]>
Cc: Miaohe Lin <[email protected]>
Cc: Muchun Song <[email protected]>
Cc: Oscar Salvador <[email protected]>
Cc: Vlastimil Babka <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
This wrapps all external vmalloc allocation functions with the
alloc_hooks() wrapper, and switches internal allocations to _noprof
variants where appropriate, for the new memory allocation profiling
feature.
[[email protected]: arch/um: fix forward declaration for vmalloc]
Link: https://lkml.kernel.org/r/[email protected]
[[email protected]: undo _noprof additions in the documentation]
Link: https://lkml.kernel.org/r/[email protected]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Kent Overstreet <[email protected]>
Signed-off-by: Suren Baghdasaryan <[email protected]>
Tested-by: Kees Cook <[email protected]>
Cc: Alexander Viro <[email protected]>
Cc: Alex Gaynor <[email protected]>
Cc: Alice Ryhl <[email protected]>
Cc: Andreas Hindborg <[email protected]>
Cc: Benno Lossin <[email protected]>
Cc: "Björn Roy Baron" <[email protected]>
Cc: Boqun Feng <[email protected]>
Cc: Christoph Lameter <[email protected]>
Cc: Dennis Zhou <[email protected]>
Cc: Gary Guo <[email protected]>
Cc: Miguel Ojeda <[email protected]>
Cc: Pasha Tatashin <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Tejun Heo <[email protected]>
Cc: Vlastimil Babka <[email protected]>
Cc: Wedson Almeida Filho <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
After redefining alloc_pages, all uses of that name are being replaced.
Change the conflicting names to prevent preprocessor from replacing them
when it's not intended.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Suren Baghdasaryan <[email protected]>
Tested-by: Kees Cook <[email protected]>
Cc: Alexander Viro <[email protected]>
Cc: Alex Gaynor <[email protected]>
Cc: Alice Ryhl <[email protected]>
Cc: Andreas Hindborg <[email protected]>
Cc: Benno Lossin <[email protected]>
Cc: "Björn Roy Baron" <[email protected]>
Cc: Boqun Feng <[email protected]>
Cc: Christoph Lameter <[email protected]>
Cc: Dennis Zhou <[email protected]>
Cc: Gary Guo <[email protected]>
Cc: Kent Overstreet <[email protected]>
Cc: Miguel Ojeda <[email protected]>
Cc: Pasha Tatashin <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Tejun Heo <[email protected]>
Cc: Vlastimil Babka <[email protected]>
Cc: Wedson Almeida Filho <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Skip freeing module's data section if there are non-zero allocation tags
because otherwise, once these allocations are freed, the access to their
code tag would cause UAF.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Suren Baghdasaryan <[email protected]>
Tested-by: Kees Cook <[email protected]>
Cc: Alexander Viro <[email protected]>
Cc: Alex Gaynor <[email protected]>
Cc: Alice Ryhl <[email protected]>
Cc: Andreas Hindborg <[email protected]>
Cc: Benno Lossin <[email protected]>
Cc: "Björn Roy Baron" <[email protected]>
Cc: Boqun Feng <[email protected]>
Cc: Christoph Lameter <[email protected]>
Cc: Dennis Zhou <[email protected]>
Cc: Gary Guo <[email protected]>
Cc: Kent Overstreet <[email protected]>
Cc: Miguel Ojeda <[email protected]>
Cc: Pasha Tatashin <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Tejun Heo <[email protected]>
Cc: Vlastimil Babka <[email protected]>
Cc: Wedson Almeida Filho <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Add support for code tagging from dynamically loaded modules.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Suren Baghdasaryan <[email protected]>
Co-developed-by: Kent Overstreet <[email protected]>
Signed-off-by: Kent Overstreet <[email protected]>
Tested-by: Kees Cook <[email protected]>
Cc: Alexander Viro <[email protected]>
Cc: Alex Gaynor <[email protected]>
Cc: Alice Ryhl <[email protected]>
Cc: Andreas Hindborg <[email protected]>
Cc: Benno Lossin <[email protected]>
Cc: "Björn Roy Baron" <[email protected]>
Cc: Boqun Feng <[email protected]>
Cc: Christoph Lameter <[email protected]>
Cc: Dennis Zhou <[email protected]>
Cc: Gary Guo <[email protected]>
Cc: Miguel Ojeda <[email protected]>
Cc: Pasha Tatashin <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Tejun Heo <[email protected]>
Cc: Vlastimil Babka <[email protected]>
Cc: Wedson Almeida Filho <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
9 out of 16 callers perform a NULL check before calling obj_cgroup_put().
Move the NULL check in the function, similar to mem_cgroup_put(). The
unlikely() NULL check in current_objcg_update() was left alone to avoid
dropping the unlikey() annotation as this a fast path.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Yosry Ahmed <[email protected]>
Acked-by: Johannes Weiner <[email protected]>
Acked-by: Roman Gushchin <[email protected]>
Cc: Michal Hocko <[email protected]>
Cc: Muchun Song <[email protected]>
Cc: Shakeel Butt <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Cross-merge networking fixes after downstream PR.
Conflicts:
drivers/net/ethernet/ti/icssg/icssg_prueth.c
net/mac80211/chan.c
89884459a0b9 ("wifi: mac80211: fix idle calculation with multi-link")
87f5500285fb ("wifi: mac80211: simplify ieee80211_assign_link_chanctx()")
https://lore.kernel.org/all/[email protected]/
net/unix/garbage.c
1971d13ffa84 ("af_unix: Suppress false-positive lockdep splat for spin_lock() in __unix_gc().")
4090fa373f0e ("af_unix: Replace garbage collection algorithm.")
drivers/net/ethernet/ti/icssg/icssg_prueth.c
drivers/net/ethernet/ti/icssg/icssg_common.c
4dcd0e83ea1d ("net: ti: icssg-prueth: Fix signedness bug in prueth_init_rx_chns()")
e2dc7bfd677f ("net: ti: icssg-prueth: Move common functions into a separate file")
No adjacent changes.
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The comment here is outdated and can cause confusion, from the code
perspective, there’s also no need for new comment, so just remove it.
Signed-off-by: Xiu Jianfeng <[email protected]>
Acked-by: Waiman Long <[email protected]>
Signed-off-by: Tejun Heo <[email protected]>
|
|
Explicitly disallow enabling mitigations at runtime for kernels that were
built with CONFIG_CPU_MITIGATIONS=n, as some architectures may omit code
entirely if mitigations are disabled at compile time.
E.g. on x86, a large pile of Kconfigs are buried behind CPU_MITIGATIONS,
and trying to provide sane behavior for retroactively enabling mitigations
is extremely difficult, bordering on impossible. E.g. page table isolation
and call depth tracking require build-time support, BHI mitigations will
still be off without additional kernel parameters, etc.
[ bp: Touchups. ]
Signed-off-by: Sean Christopherson <[email protected]>
Signed-off-by: Borislav Petkov (AMD) <[email protected]>
Acked-by: Borislav Petkov (AMD) <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Rename x86's to CPU_MITIGATIONS, define it in generic code, and force it
on for all architectures exception x86. A recent commit to turn
mitigations off by default if SPECULATION_MITIGATIONS=n kinda sorta
missed that "cpu_mitigations" is completely generic, whereas
SPECULATION_MITIGATIONS is x86-specific.
Rename x86's SPECULATIVE_MITIGATIONS instead of keeping both and have it
select CPU_MITIGATIONS, as having two configs for the same thing is
unnecessary and confusing. This will also allow x86 to use the knob to
manage mitigations that aren't strictly related to speculative
execution.
Use another Kconfig to communicate to common code that CPU_MITIGATIONS
is already defined instead of having x86's menu depend on the common
CPU_MITIGATIONS. This allows keeping a single point of contact for all
of x86's mitigations, and it's not clear that other architectures *want*
to allow disabling mitigations at compile-time.
Fixes: f337a6a21e2f ("x86/cpu: Actually turn off mitigations by default for SPECULATION_MITIGATIONS=n")
Closes: https://lkml.kernel.org/r/20240413115324.53303a68%40canb.auug.org.au
Reported-by: Stephen Rothwell <[email protected]>
Reported-by: Michael Ellerman <[email protected]>
Reported-by: Geert Uytterhoeven <[email protected]>
Signed-off-by: Sean Christopherson <[email protected]>
Signed-off-by: Borislav Petkov (AMD) <[email protected]>
Acked-by: Josh Poimboeuf <[email protected]>
Acked-by: Borislav Petkov (AMD) <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
|
|
The current folio_test_hugetlb() can be fooled by a concurrent folio split
into returning true for a folio which has never belonged to hugetlbfs.
This can't happen if the caller holds a refcount on it, but we have a few
places (memory-failure, compaction, procfs) which do not and should not
take a speculative reference.
Since hugetlb pages do not use individual page mapcounts (they are always
fully mapped and use the entire_mapcount field to record the number of
mappings), the PageType field is available now that page_mapcount()
ignores the value in this field.
In compaction and with CONFIG_DEBUG_VM enabled, the current implementation
can result in an oops, as reported by Luis. This happens since 9c5ccf2db04b
("mm: remove HUGETLB_PAGE_DTOR") effectively added some VM_BUG_ON() checks
in the PageHuge() testing path.
[[email protected]: update vmcoreinfo]
Link: https://lkml.kernel.org/r/[email protected]
Link: https://lkml.kernel.org/r/[email protected]
Fixes: 9c5ccf2db04b ("mm: remove HUGETLB_PAGE_DTOR")
Signed-off-by: Matthew Wilcox (Oracle) <[email protected]>
Reviewed-by: David Hildenbrand <[email protected]>
Acked-by: Vlastimil Babka <[email protected]>
Reported-by: Luis Chamberlain <[email protected]>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218227
Cc: Miaohe Lin <[email protected]>
Cc: Muchun Song <[email protected]>
Cc: Oscar Salvador <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Add crypto API support to BPF to be able to decrypt or encrypt packets
in TC/XDP BPF programs. Special care should be taken for initialization
part of crypto algo because crypto alloc) doesn't work with preemtion
disabled, it can be run only in sleepable BPF program. Also async crypto
is not supported because of the very same issue - TC/XDP BPF programs
are not sleepable.
Signed-off-by: Vadim Fedorenko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Martin KaFai Lau <[email protected]>
|
|
Move irq_is_nmi() to the internal header file and reuse it all over the
place.
Signed-off-by: Jinjie Ruan <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
When a CPU goes offline, the interrupts affine to that CPU are
re-configured.
Managed interrupts undergo either migration to other CPUs or shutdown if
all CPUs listed in the affinity are offline. The migration of managed
interrupts is guaranteed on x86 because there are interrupt vectors
reserved.
Regular interrupts are migrated to a still online CPU in the affinity mask
or if there is no online CPU to any online CPU.
This works as long as the still online CPUs in the affinity mask have
interrupt vectors available, but in case that none of those CPUs has a
vector available the migration fails and the device interrupt becomes
stale.
This is not any different from the case where the affinity mask does not
contain any online CPU, but there is no fallback operation for this.
Instead of giving up, retry the migration attempt with the online CPU mask
if the interrupt is not managed, as managed interrupts cannot be affected
by this problem.
Signed-off-by: Dongli Zhang <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
irq_restore_affinity_of_irq() restarts managed interrupts unconditionally
when the first CPU in the affinity mask comes online. That's correct during
normal hotplug operations, but not when resuming from S3 because the
drivers are not resumed yet and interrupt delivery is not expected by them.
Skip the startup of suspended interrupts and let resume_device_irqs() deal
with restoring them. This ensures that irqs are not delivered to drivers
during the noirq phase of resuming from S3, after non-boot CPUs are brought
back online.
Signed-off-by: David Stevens <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Yue Sun and xingwei lee reported a divide error bug in
wq_update_node_max_active():
divide error: 0000 [#1] PREEMPT SMP KASAN PTI
CPU: 1 PID: 21 Comm: cpuhp/1 Not tainted 6.9.0-rc5 #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
RIP: 0010:wq_update_node_max_active+0x369/0x6b0 kernel/workqueue.c:1605
Code: 24 bf 00 00 00 80 44 89 fe e8 83 27 33 00 41 83 fc ff 75 0d 41
81 ff 00 00 00 80 0f 84 68 01 00 00 e8 fb 22 33 00 44 89 f8 99 <41> f7
fc 89 c5 89 c7 44 89 ee e8 a8 24 33 00 89 ef 8b 5c 24 04 89
RSP: 0018:ffffc9000018fbb0 EFLAGS: 00010293
RAX: 00000000000000ff RBX: 0000000000000001 RCX: ffff888100ada500
RDX: 0000000000000000 RSI: 00000000000000ff RDI: 0000000080000000
RBP: 0000000000000001 R08: ffffffff815b1fcd R09: 1ffff1100364ad72
R10: dffffc0000000000 R11: ffffed100364ad73 R12: 0000000000000000
R13: 0000000000000100 R14: 0000000000000000 R15: 00000000000000ff
FS: 0000000000000000(0000) GS:ffff888135c00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fb8c06ca6f8 CR3: 000000010d6c6000 CR4: 0000000000750ef0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
<TASK>
workqueue_offline_cpu+0x56f/0x600 kernel/workqueue.c:6525
cpuhp_invoke_callback+0x4e1/0x870 kernel/cpu.c:194
cpuhp_thread_fun+0x411/0x7d0 kernel/cpu.c:1092
smpboot_thread_fn+0x544/0xa10 kernel/smpboot.c:164
kthread+0x2ed/0x390 kernel/kthread.c:388
ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:244
</TASK>
Modules linked in:
---[ end trace 0000000000000000 ]---
After analysis, it happens when all of the CPUs in a workqueue's affinity
get offine.
The problem can be easily reproduced by:
# echo 8 > /sys/devices/virtual/workqueue/<any-wq-name>/cpumask
# echo 0 > /sys/devices/system/cpu/cpu3/online
Use the default max_actives for nodes when all of the CPUs in the
workqueue's affinity get offline to fix the problem.
Reported-by: Yue Sun <[email protected]>
Reported-by: xingwei lee <[email protected]>
Link: https://lore.kernel.org/lkml/CAEkJfYPGS1_4JqvpSo0=FM0S1ytB8CEbyreLTtWpR900dUZymw@mail.gmail.com/
Fixes: 5797b1c18919 ("workqueue: Implement system-wide nr_active enforcement for unbound workqueues")
Cc: [email protected]
Signed-off-by: Lai Jiangshan <[email protected]>
Signed-off-by: Tejun Heo <[email protected]>
|
|
Introduce two new BPF kfuncs, bpf_preempt_disable and
bpf_preempt_enable. These kfuncs allow disabling preemption in BPF
programs. Nesting is allowed, since the intended use cases includes
building native BPF spin locks without kernel helper involvement. Apart
from that, this can be used to per-CPU data structures for cases where
programs (or userspace) may preempt one or the other. Currently, while
per-CPU access is stable, whether it will be consistent is not
guaranteed, as only migration is disabled for BPF programs.
Global functions are disallowed from being called, but support for them
will be added as a follow up not just preempt kfuncs, but rcu_read_lock
kfuncs as well. Static subprog calls are permitted. Sleepable helpers
and kfuncs are disallowed in non-preemptible regions.
Signed-off-by: Kumar Kartikeya Dwivedi <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
__bpf_prog_enter_sleepable_recur does recursion check which is not applicable
to wq callback. The callback function is part of bpf program and bpf prog might
be running on the same cpu. So recursion check would incorrectly prevent
callback from running. The code can call __bpf_prog_enter_sleepable(), but
run_ctx would be fake, hence use explicit rcu_read_lock_trace();
migrate_disable(); to address this problem. Another reason to open code is
__bpf_prog_enter* are not available in !JIT configs.
Reported-by: kernel test robot <[email protected]>
Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/
Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/
Fixes: eb48f6cd41a0 ("bpf: wq: add bpf_wq_init")
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
The optional shift of the clock used by thermal/hw load avg has been
introduced to handle case where the signal was not always a high frequency
hw signal. Now that cpufreq provides a signal for firmware and
SW pressure, we can remove this exception and always keep this PELT signal
aligned with other signals.
Mark sysctl_sched_migration_cost boot parameter as deprecated
Signed-off-by: Vincent Guittot <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
Tested-by: Lukasz Luba <[email protected]>
Reviewed-by: Qais Yousef <[email protected]>
Reviewed-by: Lukasz Luba <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
arch_update_hw_pressure()
Now that cpufreq provides a pressure value to the scheduler, rename
arch_update_thermal_pressure into HW pressure to reflect that it returns
a pressure applied by HW (i.e. with a high frequency change) and not
always related to thermal mitigation but also generated by max current
limitation as an example. Such high frequency signal needs filtering to be
smoothed and provide an value that reflects the average available capacity
into the scheduler time scale.
Signed-off-by: Vincent Guittot <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
Tested-by: Lukasz Luba <[email protected]>
Reviewed-by: Qais Yousef <[email protected]>
Reviewed-by: Lukasz Luba <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Aggregate the different pressures applied on the capacity of CPUs and
create a new function that returns the actual capacity of the CPU:
get_actual_cpu_capacity().
Signed-off-by: Vincent Guittot <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
Tested-by: Lukasz Luba <[email protected]>
Reviewed-by: Lukasz Luba <[email protected]>
Reviewed-by: Qais Yousef <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
sg_overloaded is used instead of sg_overutilized to update
rd->sg_overutilized.
Fixes: 4475cd8bfd9b ("sched/balancing: Simplify the sg_status bitmask and use separate ->overloaded and ->overutilized flags")
Signed-off-by: Vincent Guittot <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
The permissions callback should not modify the ctl_table. Enforce this
expectation via the typesystem. This is a step to put "struct ctl_table"
into .rodata throughout the kernel.
The patch was created with the following coccinelle script:
@@
identifier func, head, ctl;
@@
int func(
struct ctl_table_header *head,
- struct ctl_table *ctl)
+ const struct ctl_table *ctl)
{ ... }
(insert_entry() from fs/proc/proc_sysctl.c is a false-positive)
No additional occurrences of '.permissions =' were found after a
tree-wide search for places missed by the conccinelle script.
Reviewed-by: Joel Granados <[email protected]>
Signed-off-by: Thomas Weißschuh <[email protected]>
Signed-off-by: Joel Granados <[email protected]>
|
|
This commit comes at the tail end of a greater effort to remove the
empty elements at the end of the ctl_table arrays (sentinels) which
will reduce the overall build time size of the kernel and run time
memory bloat by ~64 bytes per sentinel (further information Link :
https://lore.kernel.org/all/ZO5Yx5JFogGi%[email protected]/)
Remove sentinel element from bpf_syscall_table.
Acked-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Joel Granados <[email protected]>
|
|
This commit comes at the tail end of a greater effort to remove the
empty elements at the end of the ctl_table arrays (sentinels) which
will reduce the overall build time size of the kernel and run time
memory bloat by ~64 bytes per sentinel (further information Link :
https://lore.kernel.org/all/ZO5Yx5JFogGi%[email protected]/)
Remove sentinel element from kern_delayacct_table
Signed-off-by: Joel Granados <[email protected]>
|
|
This commit comes at the tail end of a greater effort to remove the
empty elements at the end of the ctl_table arrays (sentinels) which
will reduce the overall build time size of the kernel and run time
memory bloat by ~64 bytes per sentinel (further information Link :
https://lore.kernel.org/all/ZO5Yx5JFogGi%[email protected]/)
Remove sentinel element from kprobe_sysclts
Acked-by: Masami Hiramatsu (Google) <[email protected]>
Signed-off-by: Joel Granados <[email protected]>
|
|
This commit comes at the tail end of a greater effort to remove the
empty elements at the end of the ctl_table arrays (sentinels) which
will reduce the overall build time size of the kernel and run time
memory bloat by ~64 bytes per sentinel (further information Link :
https://lore.kernel.org/all/ZO5Yx5JFogGi%[email protected]/)
rm sentinel element from printk_sysctls
Reviewed-by: Petr Mladek <[email protected]>
Signed-off-by: Joel Granados <[email protected]>
|
|
This commit comes at the tail end of a greater effort to remove the
empty elements at the end of the ctl_table arrays (sentinels) which
will reduce the overall build time size of the kernel and run time
memory bloat by ~64 bytes per sentinel (further information Link :
https://lore.kernel.org/all/ZO5Yx5JFogGi%[email protected]/)
rm sentinel element from ctl_table arrays
Acked-by: Peter Zijlstra (Intel) <[email protected]>
Tested-by: Valentin Schneider <[email protected]>
Reviewed-by: Valentin Schneider <[email protected]>
Signed-off-by: Joel Granados <[email protected]>
|
|
This commit comes at the tail end of a greater effort to remove the
empty elements at the end of the ctl_table arrays (sentinels) which
will reduce the overall build time size of the kernel and run time
memory bloat by ~64 bytes per sentinel (further information Link :
https://lore.kernel.org/all/ZO5Yx5JFogGi%[email protected]/)
Remove sentinel element from seccomp_sysctl_table.
Acked-by: Kees Cook <[email protected]>
Signed-off-by: Joel Granados <[email protected]>
|
|
This commit comes at the tail end of a greater effort to remove the
empty elements at the end of the ctl_table arrays (sentinels) which
will reduce the overall build time size of the kernel and run time
memory bloat by ~64 bytes per sentinel (further information Link :
https://lore.kernel.org/all/ZO5Yx5JFogGi%[email protected]/)
Remove sentinel element from time_sysctl
Signed-off-by: Joel Granados <[email protected]>
|
|
This commit comes at the tail end of a greater effort to remove the
empty elements at the end of the ctl_table arrays (sentinels) which
will reduce the overall build time size of the kernel and run time
memory bloat by ~64 bytes per sentinel (further information Link :
https://lore.kernel.org/all/ZO5Yx5JFogGi%[email protected]/)
Remove sentinel elements from ftrace_sysctls and user_event_sysctls
Acked-by: Masami Hiramatsu (Google) <[email protected]>
Acked-by: Steven Rostedt (Google) <[email protected]>
Signed-off-by: Joel Granados <[email protected]>
|
|
This commit comes at the tail end of a greater effort to remove the
empty elements at the end of the ctl_table arrays (sentinels) which
will reduce the overall build time size of the kernel and run time
memory bloat by ~64 bytes per sentinel (further information Link :
https://lore.kernel.org/all/ZO5Yx5JFogGi%[email protected]/)
Remove sentinel element from usermodehelper_table
Signed-off-by: Joel Granados <[email protected]>
|
|
This commit comes at the tail end of a greater effort to remove the
empty elements at the end of the ctl_table arrays (sentinels) which
will reduce the overall build time size of the kernel and run time
memory bloat by ~64 bytes per sentinel (further information Link :
https://lore.kernel.org/all/ZO5Yx5JFogGi%[email protected]/)
Remove the sentinel from ctl_table arrays. Reduce by one the values used
to compare the size of the adjusted arrays.
Signed-off-by: Joel Granados <[email protected]>
|
|
The default nna (node_nr_active) is used when the pool isn't tied to a
specific NUMA node. This can happen in the following cases:
1. On NUMA, if per-node pwq init failure and the fallback pwq is used.
2. On NUMA, if a pool is configured to span multiple nodes.
3. On single node setups.
5797b1c18919 ("workqueue: Implement system-wide nr_active enforcement for
unbound workqueues") set the default nna->max to min_active because only #1
was being considered. For #2 and #3, using min_active means that the max
concurrency in normal operation is pushed down to min_active which is
currently 8, which can obviously lead to performance issues.
exact value nna->max is set to doesn't really matter. #2 can only happen if
the workqueue is intentionally configured to ignore NUMA boundaries and
there's no good way to distribute max_active in this case. #3 is the default
behavior on single node machines.
Let's set it the default nna->max to max_active. This fixes the artificially
lowered concurrency problem on single node machines and shouldn't hurt
anything for other cases.
Signed-off-by: Tejun Heo <[email protected]>
Reported-by: Shinichiro Kawasaki <[email protected]>
Fixes: 5797b1c18919 ("workqueue: Implement system-wide nr_active enforcement for unbound workqueues")
Link: https://lore.kernel.org/dm-devel/[email protected]/
Signed-off-by: Tejun Heo <[email protected]>
|
|
Commit 8996f93fc388 ("cgroup/cpuset: Statically initialize more
members of top_cpuset") uses an incorrect "<" relational operator for
the CS_SCHED_LOAD_BALANCE bit when initializing the top_cpuset. This
results in load_balancing turned off by default in the top cpuset which
is bad for performance.
Fix this by using the BIT() helper macro to set the desired top_cpuset
flags and avoid similar mistake from being made in the future.
Fixes: 8996f93fc388 ("cgroup/cpuset: Statically initialize more members of top_cpuset")
Signed-off-by: Waiman Long <[email protected]>
Signed-off-by: Tejun Heo <[email protected]>
|
|
again, copy/paste from bpf_timer_start().
Signed-off-by: Benjamin Tissoires <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
To support sleepable async callbacks, we need to tell push_async_cb()
whether the cb is sleepable or not.
The verifier now detects that we are in bpf_wq_set_callback_impl and
can allow a sleepable callback to happen.
Signed-off-by: Benjamin Tissoires <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
We need to teach the verifier about the second argument which is declared
as void * but which is of type KF_ARG_PTR_TO_MAP. We could have dropped
this extra case if we declared the second argument as struct bpf_map *,
but that means users will have to do extra casting to have their program
compile.
We also need to duplicate the timer code for the checking if the map
argument is matching the provided workqueue.
Signed-off-by: Benjamin Tissoires <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Currently bpf_wq_cancel_and_free() is just a placeholder as there is
no memory allocation for bpf_wq just yet.
Again, duplication of the bpf_timer approach
Signed-off-by: Benjamin Tissoires <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Introduce support for KF_ARG_PTR_TO_WORKQUEUE. The kfuncs will use bpf_wq
as argument and that will be recognized as workqueue argument by verifier.
bpf_wq_kern casting can happen inside kfunc, but using bpf_wq in
argument makes life easier for users who work with non-kern type in BPF
progs.
Duplicate process_timer_func into process_wq_func.
meta argument is only needed to ensure bpf_wq_init's workqueue and map
arguments are coming from the same map (map_uid logic is necessary for
correct inner-map handling), so also amend check_kfunc_args() to
match what helpers functions check is doing.
Signed-off-by: Benjamin Tissoires <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
When a kfunc is declared with a KF_ARG_PTR_TO_MAP, we should have
reg->map_ptr set to a non NULL value, otherwise, that means that the
underlying type is not a map.
Signed-off-by: Benjamin Tissoires <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Mostly a copy/paste from the bpf_timer API, without the initialization
and free, as they will be done in a separate patch.
Signed-off-by: Benjamin Tissoires <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Same reason than most bpf_timer* functions, we need almost the same for
workqueues.
So extract the generic part out of it so bpf_wq_cancel_and_free can reuse
it.
Signed-off-by: Benjamin Tissoires <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
In the same way we have a generic __bpf_async_init(), we also need
to share code between timer and workqueue for the set_callback call.
We just add an unused flags parameter, as it will be used for workqueues.
Signed-off-by: Benjamin Tissoires <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
No code change except for the new flags argument being stored in the
local data struct.
Signed-off-by: Benjamin Tissoires <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
To be able to add workqueues and reuse most of the timer code, we need
to make bpf_hrtimer more generic.
There is no code change except that the new struct gets a new u64 flags
attribute. We are still below 2 cache lines, so this shouldn't impact
the current running codes.
The ordering is also changed. Everything related to async callback
is now on top of bpf_hrtimer.
Signed-off-by: Benjamin Tissoires <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|