aboutsummaryrefslogtreecommitdiff
path: root/kernel
AgeCommit message (Collapse)AuthorFilesLines
2013-06-24genirq: Irqchip: document gcflags arg of irq_alloc_domain_generic_chipsJames Hogan1-0/+1
Commit 088f40b7b027dad6519712ff224a5798dd62a204 ("genirq: Generic chip: Add linear irq domain support") missed kerneldoc for the gcflags argument of irq_alloc_domain_generic_chips(). Add it now. Signed-off-by: James Hogan <[email protected]> Acked-by: Grant Likely <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Thomas Gleixner <[email protected]>
2013-06-24irq: fix checkpatch errorKefeng Wang1-5/+3
ERROR: space required before the open parenthesis '(' WARNING: Prefer pr_warn(... to pr_warning(... Just fix above 2 issue. Signed-off-by: Kefeng Wang <[email protected]> Signed-off-by: Grant Likely <[email protected]>
2013-06-24irqdomain: Include hwirq number in /proc/interruptsGrant Likely1-0/+2
Add the hardware interrupt number to the output of /proc/interrupts. It is often important to have access to the hardware interrupt number because it identifies exactly how an interrupt signal is wired up to the interrupt controller. This is especially important when using irq_domains since irq numbers get dynamically allocated in that case, and have no relation to the actual hardware number. Note: This output is currently conditional on whether or not the irq_domain pointer is set; however hwirq could still be used without irq_domain. It may be worthwhile to always output the hwirq number regardless of the domain pointer. Signed-off-by: Grant Likely <[email protected]> Tested-by: Olof Johansson <[email protected]> Cc: Ben Herrenschmidt <[email protected]> Cc: Thomas Gleixner <[email protected]>
2013-06-24irqdomain: make irq_linear_revmap() a fast path againGrant Likely1-26/+8
Over the years, irq_linear_revmap() gained tests and checks to make sure callers were using it safely, which while important, also make it less of a fast path. After the irqdomain refactoring done recently, it is now possible to make irq_linear_revmap() a fast path again. This patch moves irq_linear_revmap() to the header file and makes it a static inline so that interrupt controller drivers using a linear mapping can decode the virq from a hwirq in just a couple of instructions. Signed-off-by: Grant Likely <[email protected]>
2013-06-24irqdomain: remove irq_domain_generate_simple()Grant Likely1-15/+0
Nobody calls it; remove the function Signed-off-by: Grant Likely <[email protected]>
2013-06-24irqdomain: Refactor irq_domain_associate_many()Grant Likely1-94/+91
Originally, irq_domain_associate_many() was designed to unwind the mapped irqs on a failure of any individual association. However, that proved to be a problem with certain IRQ controllers. Some of them only support a subset of irqs, and will fail when attempting to map a reserved IRQ. In those cases we want to map as many IRQs as possible, so instead it is better for irq_domain_associate_many() to make a best-effort attempt to map irqs, but not fail if any or all of them don't succeed. If a caller really cares about how many irqs got associated, then it should instead go back and check that all of the irqs is cares about were mapped. The original design open-coded the individual association code into the body of irq_domain_associate_many(), but with no longer needing to unwind associations, the code becomes simpler to split out irq_domain_associate() to contain the bulk of the logic, and irq_domain_associate_many() to be a simple loop wrapper. This patch also adds a new error check to the associate path to make sure it isn't called for an irq larger than the controller can handle, and adds locking so that the irq_domain_mutex is held while setting up a new association. v3: Fixup missing change to irq_domain_add_tree() v2: Fixup x86 warning. irq_domain_associate_many() no longer returns an error code, but reports errors to the printk log directly. In the majority of cases we don't actually want to fail if there is a problem, but rather log it and still try to boot the system. Signed-off-by: Grant Likely <[email protected]> irqdomain: Fix flubbed irq_domain_associate_many refactoring commit d39046ec72, "irqdomain: Refactor irq_domain_associate_many()" was missing the following hunk which causes a boot failure on anything using irq_domain_add_tree() to allocate an irq domain. Signed-off-by: Grant Likely <[email protected]> Cc: Michael Neuling <[email protected]> Cc: Benjamin Herrenschmidt <[email protected]>, Cc: Thomas Gleixner <[email protected]>, Cc: Stephen Rothwell <[email protected]>
2013-06-24PM / QoS: Add pm_qos_request tracepointsSahara1-0/+5
Adds tracepoints to pm_qos_add_request, pm_qos_update_request, pm_qos_remove_request, and pm_qos_update_request_timeout. It's useful for checking pm_qos_class, value, and timeout_us. Signed-off-by: Sahara <[email protected]> Signed-off-by: Rafael J. Wysocki <[email protected]>
2013-06-24PM / QoS: Add pm_qos_update_target/flags tracepointsSahara1-0/+3
This patch adds tracepoints to pm_qos_update_target and pm_qos_update_flags. It's useful for checking pm qos action, previous value and current value. Signed-off-by: Sahara <[email protected]> Signed-off-by: Rafael J. Wysocki <[email protected]>
2013-06-23perf: Drop sample rate when sampling is too slowDave Hansen2-4/+97
This patch keeps track of how long perf's NMI handler is taking, and also calculates how many samples perf can take a second. If the sample length times the expected max number of samples exceeds a configurable threshold, it drops the sample rate. This way, we don't have a runaway sampling process eating up the CPU. This patch can tend to drop the sample rate down to level where perf doesn't work very well. *BUT* the alternative is that my system hangs because it spends all of its time handling NMIs. I'll take a busted performance tool over an entire system that's busted and undebuggable any day. BTW, my suspicion is that there's still an underlying bug here. Using the HPET instead of the TSC is definitely a contributing factor, but I suspect there are some other things going on. But, I can't go dig down on a bug like that with my machine hanging all the time. Signed-off-by: Dave Hansen <[email protected]> Acked-by: Peter Zijlstra <[email protected]> Cc: [email protected] Cc: [email protected] Cc: Dave Hansen <[email protected]> [ Prettified it a bit. ] Signed-off-by: Ingo Molnar <[email protected]>
2013-06-21Merge branch 'x86/urgent' of ↵Linus Torvalds1-10/+11
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Peter Anvin: "This series fixes a couple of build failures, and fixes MTRR cleanup and memory setup on very specific memory maps. Finally, it fixes triggering backtraces on all CPUs, which was inadvertently disabled on x86." * 'x86/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/efi: Fix dummy variable buffer allocation x86: Fix trigger_all_cpu_backtrace() implementation x86: Fix section mismatch on load_ucode_ap x86: fix build error and kconfig for ia32_emulation and binfmt range: Do not add new blank slot with add_range_with_merge x86, mtrr: Fix original mtrr range get for mtrr_cleanup
2013-06-21tick: Fix tick_broadcast_pending_mask not clearedDaniel Lezcano1-2/+5
The recent modification in the cpuidle framework consolidated the timer broadcast code across the different drivers by setting a new flag in the idle state. It tells the cpuidle core code to enter/exit the broadcast mode for the cpu when entering a deep idle state. The broadcast timer enter/exit is no longer handled by the back-end driver. This change made the local interrupt to be enabled *before* calling CLOCK_EVENT_NOTIFY_EXIT. On a tegra114, a four cores system, when the flag has been introduced in the driver, the following warning appeared: WARNING: at kernel/time/tick-broadcast.c:578 tick_broadcast_oneshot_control CPU: 2 PID: 0 Comm: swapper/2 Not tainted 3.10.0-rc3-next-20130529+ #15 [<c00667f8>] (tick_broadcast_oneshot_control+0x1a4/0x1d0) from [<c0065cd0>] (tick_notify+0x240/0x40c) [<c0065cd0>] (tick_notify+0x240/0x40c) from [<c0044724>] (notifier_call_chain+0x44/0x84) [<c0044724>] (notifier_call_chain+0x44/0x84) from [<c0044828>] (raw_notifier_call_chain+0x18/0x20) [<c0044828>] (raw_notifier_call_chain+0x18/0x20) from [<c00650cc>] (clockevents_notify+0x28/0x170) [<c00650cc>] (clockevents_notify+0x28/0x170) from [<c033f1f0>] (cpuidle_idle_call+0x11c/0x168) [<c033f1f0>] (cpuidle_idle_call+0x11c/0x168) from [<c000ea94>] (arch_cpu_idle+0x8/0x38) [<c000ea94>] (arch_cpu_idle+0x8/0x38) from [<c005ea80>] (cpu_startup_entry+0x60/0x134) [<c005ea80>] (cpu_startup_entry+0x60/0x134) from [<804fe9a4>] (0x804fe9a4) I don't have the hardware, so I wasn't able to reproduce the warning but after looking a while at the code, I deduced the following: 1. the CPU2 enters a deep idle state and sets the broadcast timer 2. the timer expires, the tick_handle_oneshot_broadcast function is called, setting the tick_broadcast_pending_mask and waking up the idle cpu CPU2 3. the CPU2 exits idle handles the interrupt and then invokes tick_broadcast_oneshot_control with CLOCK_EVENT_NOTIFY_EXIT which runs the following code: [...] if (dev->next_event.tv64 == KTIME_MAX) goto out; if (cpumask_test_and_clear_cpu(cpu, tick_broadcast_pending_mask)) goto out; [...] So if there is no next event scheduled for CPU2, we fulfil the first condition and jump out without clearing the tick_broadcast_pending_mask. 4. CPU2 goes to deep idle again and calls tick_broadcast_oneshot_control with CLOCK_NOTIFY_EVENT_ENTER but with the tick_broadcast_pending_mask set for CPU2, triggering the warning. The issue only surfaced due to the modifications of the cpuidle framework, which resulted in interrupts being enabled before the call to the clockevents code. If the call happens before interrupts have been enabled, the warning cannot trigger, because there is still the event pending which caused the broadcast timer expiry. Move the check for the next event below the check for the pending bit, so the pending bit gets cleared whether an event is scheduled on the cpu or not. [ tglx: Massaged changelog ] Signed-off-by: Daniel Lezcano <[email protected]> Reported-and-tested-by: Joseph Lo <[email protected]> Cc: Stephen Warren <[email protected]> Cc: [email protected] Cc: [email protected] Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Thomas Gleixner <[email protected]>
2013-06-21PM / Sleep: Print last wakeup source on failed wakeup_count writeJulius Werner1-0/+2
Commit a938da06 introduced a useful little log message to tell users/debuggers which wakeup source aborted a suspend. However, this message is only printed if the abort happens during the in-kernel suspend path (after writing /sys/power/state). The full specification of the /sys/power/wakeup_count facility allows user-space power managers to double-check if wakeups have already happened before it actually tries to suspend (e.g. while it was running user-space pre-suspend hooks), by writing the last known wakeup_count value to /sys/power/wakeup_count. This patch changes the sysfs handler for that node to also print said log message if that write fails, so that we can figure out the offending wakeup source for both kinds of suspend aborts. Signed-off-by: Julius Werner <[email protected]> Signed-off-by: Rafael J. Wysocki <[email protected]>
2013-06-21PM / QoS: correct the valid range of pm_qos_classSahara1-3/+3
The valid start index for pm_qos_array is not 0, but PM_QOS_CPU_DMA_LATENCY. There is a null_pm_qos at index 0 of pm_qos_array. However, null_pm_qos is not created as misc device so that inclusion of 0 index for checking pm_qos_class especially for file operations is not proper here. [rjw: Changelog, a bit] Signed-off-by: Sahara <[email protected]> Signed-off-by: Rafael J. Wysocki <[email protected]>
2013-06-20Merge branch 'sched-urgent-for-linus' of ↵Linus Torvalds2-4/+57
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fixes from Ingo Molnar: "Two smaller fixes - plus a context tracking tracing fix that is a bit bigger" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: tracing/context-tracking: Add preempt_schedule_context() for tracing sched: Fix clear NOHZ_BALANCE_KICK sched/x86: Construct all sibling maps if smt
2013-06-20Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds3-82/+185
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Ingo Molnar: "Four fixes. The mmap ones are unfortunately larger than desired - fuzzing uncovered bugs that needed perf context life time management changes to fix properly" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86: Fix broken PEBS-LL support on SNB-EP/IVB-EP perf: Fix mmap() accounting hole perf: Fix perf mmap bugs kprobes: Fix to free gone and unused optprobes
2013-06-20Merge branch 'core-urgent-for-linus' of ↵Linus Torvalds1-0/+17
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull cpu idle fixes from Thomas Gleixner: - Add a missing irq enable. Fallout of the idle conversion - Fix stackprotector wreckage caused by the idle conversion * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: idle: Enable interrupts in the weak arch_cpu_idle() implementation idle: Add the stack canary init to cpu_startup_entry()
2013-06-20Merge branch 'timers-urgent-for-linus' of ↵Linus Torvalds5-10/+5
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fixes from Thomas Gleixner: - Fix inconstinant clock usage in virtual time accounting - Fix a build error in KVM caused by the NOHZ work - Remove a pointless timekeeping duty assignment which breaks NOHZ - Use a proper notifier return value to avoid random behaviour * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: tick: Remove useless timekeeping duty attribution to broadcast source nohz: Fix notifier return val that enforce timekeeping kvm: Move guest entry/exit APIs to context_tracking vtime: Use consistent clocks among nohz accounting
2013-06-20hw_breakpoint: Introduce "struct bp_cpuinfo"Oleg Nesterov1-33/+36
This patch simply moves all per-cpu variables into the new single per-cpu "struct bp_cpuinfo". To me this looks more logical and clean, but this can also simplify the further potential changes. In particular, I do not think this memory should be per-cpu, it is never used "locally". After this change it is trivial to turn it into, say, bootmem[nr_cpu_ids]. Reported-by: Vince Weaver <[email protected]> Signed-off-by: Oleg Nesterov <[email protected]> Acked-by: Frederic Weisbecker <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Ingo Molnar <[email protected]>
2013-06-20hw_breakpoint: Simplify *register_wide_hw_breakpoint()Oleg Nesterov1-23/+11
1. register_wide_hw_breakpoint() can use unregister_ if failure, no need to duplicate the code. 2. "struct perf_event **pevent" adds the unnecesary lever of indirection and complication, use per_cpu(*cpu_events, cpu). Reported-by: Vince Weaver <[email protected]> Signed-off-by: Oleg Nesterov <[email protected]> Acked-by: Frederic Weisbecker <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Ingo Molnar <[email protected]>
2013-06-20hw_breakpoint: Introduce cpumask_of_bp()Oleg Nesterov1-26/+17
Add the trivial helper which simply returns cpumask_of() or cpu_possible_mask depending on bp->cpu. Change fetch_bp_busy_slots() and toggle_bp_slot() to always do for_each_cpu(cpumask_of_bp) to simplify the code and avoid the code duplication. Reported-by: Vince Weaver <[email protected]> Signed-off-by: Oleg Nesterov <[email protected]> Acked-by: Frederic Weisbecker <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Ingo Molnar <[email protected]>
2013-06-20hw_breakpoint: Simplify the "weight" usage in toggle_bp_slot() pathsOleg Nesterov1-12/+8
Change toggle_bp_slot() to make "weight" negative if !enable. This way we can always use "+ weight" without additional "if (enable)" check and toggle_bp_task_slot() no longer needs this arg. Reported-by: Vince Weaver <[email protected]> Signed-off-by: Oleg Nesterov <[email protected]> Acked-by: Frederic Weisbecker <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Ingo Molnar <[email protected]>
2013-06-20hw_breakpoint: Simplify list/idx mess in toggle_bp_slot() pathsOleg Nesterov1-24/+16
The enable/disable logic in toggle_bp_slot() is not symmetrical and imho very confusing. "old_count" in toggle_bp_task_slot() is actually new_count because this bp was already removed from the list. Change toggle_bp_slot() to always call list_add/list_del after toggle_bp_task_slot(). This way old_idx is task_bp_pinned() and this entry should be decremented, new_idx is +/-weight and we need to increment this element. The code/logic looks obvious. Reported-by: Vince Weaver <[email protected]> Signed-off-by: Oleg Nesterov <[email protected]> Acked-by: Frederic Weisbecker <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Ingo Molnar <[email protected]>
2013-06-20Merge branch 'perf/urgent' into perf/coreIngo Molnar1-3/+3
Merge in two hw_breakpoint fixes, before applying another 5. Signed-off-by: Ingo Molnar <[email protected]>
2013-06-20hw_breakpoint: Use cpu_possible_mask in {reserve,release}_bp_slot()Oleg Nesterov1-2/+2
fetch_bp_busy_slots() and toggle_bp_slot() use for_each_online_cpu(), this is obviously wrong wrt cpu_up() or cpu_down(), we can over/under account the per-cpu numbers. For example: # echo 0 >> /sys/devices/system/cpu/cpu1/online # perf record -e mem:0x10 -p 1 & # echo 1 >> /sys/devices/system/cpu/cpu1/online # perf record -e mem:0x10,mem:0x10,mem:0x10,mem:0x10 -C1 -a & # taskset -p 0x2 1 triggers the same WARN_ONCE("Can't find any breakpoint slot") in arch_install_hw_breakpoint(). Reported-by: Vince Weaver <[email protected]> Signed-off-by: Oleg Nesterov <[email protected]> Acked-by: Frederic Weisbecker <[email protected]> Cc: <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Ingo Molnar <[email protected]>
2013-06-20hw_breakpoint: Fix cpu check in task_bp_pinned(cpu)Oleg Nesterov1-1/+1
trinity fuzzer triggered WARN_ONCE("Can't find any breakpoint slot") in arch_install_hw_breakpoint() but the problem is not arch-specific. The problem is, task_bp_pinned(cpu) checks "cpu == iter->cpu" but this doesn't account the "all cpus" events with iter->cpu < 0. This means that, say, register_user_hw_breakpoint(tsk) can happily create the arbitrary number > HBP_NUM of breakpoints which can not be activated. toggle_bp_task_slot() is equally wrong by the same reason and nr_task_bp_pinned[] can have negative entries. Simple test: # perl -e 'sleep 1 while 1' & # perf record -e mem:0x10,mem:0x10,mem:0x10,mem:0x10,mem:0x10 -p `pidof perl` Before this patch this triggers the same problem/WARN_ON(), after the patch it correctly fails with -ENOSPC. Reported-by: Vince Weaver <[email protected]> Signed-off-by: Oleg Nesterov <[email protected]> Acked-by: Frederic Weisbecker <[email protected]> Cc: <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Ingo Molnar <[email protected]>
2013-06-19Merge tag 'please-pull-einj' of ↵Ingo Molnar1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras into x86/ras Pull miscellaneous fixes for ACPI EINJ (error injection) code, from Tony Luck. Signed-off-by: Ingo Molnar <[email protected]>
2013-06-19Merge branch 'rcu/next' of ↵Ingo Molnar7-1208/+154
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu into core/rcu Pull RCU changes from Paul E. McKenney: "The major changes for this series are: 1. Simplify RCU's grace-period and callback processing based on the new numbering for callbacks. These were posted to LKML at https://lkml.org/lkml/2013/5/20/330. 2. Documentation updates. These were posted to LKML at https://lkml.org/lkml/2013/5/20/348. 3. Miscellaneous fixes, including converting a few remaining printk() calls to pr_*(). These were posted to LKML at https://lkml.org/lkml/2013/5/20/324. 4. SRCU-related changes and fixes. These were posted to LKML at https://lkml.org/lkml/2013/5/20/425. 5. Removal of TINY_PREEMPT_RCU in favor of TREE_PREEMPT_RCU for single-CPU low-latency systems. These were posted to LKML at https://lkml.org/lkml/2013/5/20/427." Signed-off-by: Ingo Molnar <[email protected]>
2013-06-19sched: Don't mix use of typedef ctl_table and struct ctl_tableJoe Perches1-1/+1
Just use struct ctl_table. Signed-off-by: Joe Perches <[email protected]> Signed-off-by: Peter Zijlstra <[email protected]> Link: http://lkml.kernel.org/r/1371063336.2069.22.camel@joe-AO722 Signed-off-by: Ingo Molnar <[email protected]>
2013-06-19sched: Remove WARN_ON(!sd) from init_sched_groups_power()Viresh Kumar1-1/+1
sd can't be NULL in init_sched_groups_power() and so checking it for NULL isn't useful. In case it is required, then also we need to rearrange the code a bit as we already accessed invalid pointer sd to get sg: sg = sd->groups. Signed-off-by: Viresh Kumar <[email protected]> Signed-off-by: Peter Zijlstra <[email protected]> Link: http://lkml.kernel.org/r/2bbe633cd74b431c05253a8ce61fdfd5066a531b.1370948150.git.viresh.kumar@linaro.org Signed-off-by: Ingo Molnar <[email protected]>
2013-06-19sched: Fix memory leakage in build_sched_groups()Viresh Kumar1-2/+2
In build_sched_groups() we don't need to call get_group() for cpus which are already covered in previous iterations. Calling get_group() would mark the group used and eventually leak it since we wouldn't connect it and not find it again to free it. This will happen only in cases where sg->cpumask contained more than one cpu (For any topology level). This patch would free sg's memory for all cpus leaving the group leader as the group isn't marked used now. Signed-off-by: Viresh Kumar <[email protected]> Signed-off-by: Peter Zijlstra <[email protected]> Link: http://lkml.kernel.org/r/7a61e955abdcbb1dfa9fe493f11a5ec53a11ddd3.1370948150.git.viresh.kumar@linaro.org Signed-off-by: Ingo Molnar <[email protected]>
2013-06-19sched: Use cached value of span instead of calling sched_domain_span()Viresh Kumar1-1/+1
In the beginning of build_sched_groups() we called sched_domain_span() and cached its return value in span. Few statements later we are calling it again to get the same pointer. Lets use the cached value instead as it hasn't changed in between. Signed-off-by: Viresh Kumar <[email protected]> Signed-off-by: Peter Zijlstra <[email protected]> Link: http://lkml.kernel.org/r/834ecd507071ad88aff039352dbc7e063dd996a7.1370948150.git.viresh.kumar@linaro.org Signed-off-by: Ingo Molnar <[email protected]>
2013-06-19sched: Create for_each_sd_topology()Viresh Kumar1-3/+6
For loop for traversing sched_domain_topology was used at multiple placed in core.c. This patch removes code redundancy by creating for_each_sd_topology(). Signed-off-by: Viresh Kumar <[email protected]> Signed-off-by: Peter Zijlstra <[email protected]> Link: http://lkml.kernel.org/r/e0e04542f54e9464bd9da54f5ccfe62ec6c4c0bc.1370861520.git.viresh.kumar@linaro.org Signed-off-by: Ingo Molnar <[email protected]>
2013-06-19sched: Don't set sd->child to NULL when it is already NULLViresh Kumar1-1/+1
Memory for sd is allocated with kzalloc_node() which will initialize its fields with zero. In build_sched_domain() we are setting sd->child to child even if child is NULL, which isn't required. Lets do it only if child isn't NULL. Signed-off-by: Viresh Kumar <[email protected]> Signed-off-by: Peter Zijlstra <[email protected]> Link: http://lkml.kernel.org/r/f4753a1730051341003ad2ad29a3229c7356678e.1370861520.git.viresh.kumar@linaro.org Signed-off-by: Ingo Molnar <[email protected]>
2013-06-19sched: Don't initialize alloc_state in build_sched_domains()Viresh Kumar1-1/+1
alloc_state will be overwritten by __visit_domain_allocation_hell() and so we don't actually need to initialize alloc_state. Signed-off-by: Viresh Kumar <[email protected]> Signed-off-by: Peter Zijlstra <[email protected]> Link: http://lkml.kernel.org/r/df57734a075cc5ad130e1ae498702e24f2529ab8.1370861520.git.viresh.kumar@linaro.org Signed-off-by: Ingo Molnar <[email protected]>
2013-06-19sched: Optimize build_sched_domains() for saving first SD node for a cpuViresh Kumar1-5/+2
We are saving first scheduling domain for a cpu in build_sched_domains() by iterating over the nested sd->child list. We don't actually need to do it this way. tl will be equal to sched_domain_topology for the first iteration and so we can set *per_cpu_ptr(d.sd, i) based on that. So, save pointer to first SD while running the iteration loop over tl's. Signed-off-by: Viresh Kumar <[email protected]> Signed-off-by: Peter Zijlstra <[email protected]> Link: http://lkml.kernel.org/r/fc473527cbc4dfa0b8eeef2a59db74684eb59a83.1370436120.git.viresh.kumar@linaro.org Signed-off-by: Ingo Molnar <[email protected]>
2013-06-19sched: Remove unused params of build_sched_domain()Viresh Kumar1-4/+3
build_sched_domain() never uses parameter struct s_data *d and so passing it is useless. Remove it. Signed-off-by: Viresh Kumar <[email protected]> Signed-off-by: Peter Zijlstra <[email protected]> Link: http://lkml.kernel.org/r/545e0b4536166a15b4475abcafe5ed0db4ad4a2c.1370436120.git.viresh.kumar@linaro.org Signed-off-by: Ingo Molnar <[email protected]>
2013-06-19sched: Rename sched.c as sched/core.c in comments and DocumentationViresh Kumar3-4/+4
Most of the stuff from kernel/sched.c was moved to kernel/sched/core.c long time back and the comments/Documentation never got updated. I figured it out when I was going through sched-domains.txt and so thought of fixing it globally. I haven't crossed check if the stuff that is referenced in sched/core.c by all these files is still present and hasn't changed as that wasn't the motive behind this patch. Signed-off-by: Viresh Kumar <[email protected]> Signed-off-by: Peter Zijlstra <[email protected]> Link: http://lkml.kernel.org/r/cdff76a265326ab8d71922a1db5be599f20aad45.1370329560.git.viresh.kumar@linaro.org Signed-off-by: Ingo Molnar <[email protected]>
2013-06-19sched: Femove the useless declaration in kernel/sched/fair.cMichael Wang1-4/+0
default_cfs_period(), do_sched_cfs_period_timer(), do_sched_cfs_slack_timer() already defined previously, no need to declare again. Signed-off-by: Michael Wang <[email protected]> Signed-off-by: Peter Zijlstra <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Ingo Molnar <[email protected]>
2013-06-19sched: Refine the code in unthrottle_cfs_rq()Michael Wang1-1/+1
Directly use rq to save some code. Signed-off-by: Michael Wang <[email protected]> Signed-off-by: Peter Zijlstra <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Ingo Molnar <[email protected]>
2013-06-19sched/rt: Simplify pull_rt_task() logic and remove .leaf_rt_rq_listKirill Tkhai2-67/+16
[ Peter, this is based off of some of my work, I ran it though a few tests and it passed. I also reviewed it, and added my SOB as I am somewhat a co-author to it. ] Based on the patch by Steven Rostedt from previous year: https://lkml.org/lkml/2012/4/18/517 1)Simplify pull_rt_task() logic: search in pushable tasks of dest runqueue. The only pullable tasks are the tasks which are pushable in their local rq, and no others. 2)Remove .leaf_rt_rq_list member of struct rt_rq and functions connected with it: nobody uses it since now. Signed-off-by: Kirill Tkhai <[email protected]> Signed-off-by: Steven Rostedt <[email protected]> Signed-off-by: Peter Zijlstra <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Ingo Molnar <[email protected]>
2013-06-19Merge branch 'sched/urgent' into sched/coreIngo Molnar34-1096/+1297
Merge in fixes before applying ongoing new work. Signed-off-by: Ingo Molnar <[email protected]>
2013-06-19tracing/context-tracking: Add preempt_schedule_context() for tracingSteven Rostedt1-0/+40
Dave Jones hit the following bug report: =============================== [ INFO: suspicious RCU usage. ] 3.10.0-rc2+ #1 Not tainted ------------------------------- include/linux/rcupdate.h:771 rcu_read_lock() used illegally while idle! other info that might help us debug this: RCU used illegally from idle CPU! rcu_scheduler_active = 1, debug_locks = 0 RCU used illegally from extended quiescent state! 2 locks held by cc1/63645: #0: (&rq->lock){-.-.-.}, at: [<ffffffff816b39fd>] __schedule+0xed/0x9b0 #1: (rcu_read_lock){.+.+..}, at: [<ffffffff8109d645>] cpuacct_charge+0x5/0x1f0 CPU: 1 PID: 63645 Comm: cc1 Not tainted 3.10.0-rc2+ #1 [loadavg: 40.57 27.55 13.39 25/277 64369] Hardware name: Gigabyte Technology Co., Ltd. GA-MA78GM-S2H/GA-MA78GM-S2H, BIOS F12a 04/23/2010 0000000000000000 ffff88010f78fcf8 ffffffff816ae383 ffff88010f78fd28 ffffffff810b698d ffff88011c092548 000000000023d073 ffff88011c092500 0000000000000001 ffff88010f78fd60 ffffffff8109d7c5 ffffffff8109d645 Call Trace: [<ffffffff816ae383>] dump_stack+0x19/0x1b [<ffffffff810b698d>] lockdep_rcu_suspicious+0xfd/0x130 [<ffffffff8109d7c5>] cpuacct_charge+0x185/0x1f0 [<ffffffff8109d645>] ? cpuacct_charge+0x5/0x1f0 [<ffffffff8108dffc>] update_curr+0xec/0x240 [<ffffffff8108f528>] put_prev_task_fair+0x228/0x480 [<ffffffff816b3a71>] __schedule+0x161/0x9b0 [<ffffffff816b4721>] preempt_schedule+0x51/0x80 [<ffffffff816b4800>] ? __cond_resched_softirq+0x60/0x60 [<ffffffff816b6824>] ? retint_careful+0x12/0x2e [<ffffffff810ff3cc>] ftrace_ops_control_func+0x1dc/0x210 [<ffffffff816be280>] ftrace_call+0x5/0x2f [<ffffffff816b681d>] ? retint_careful+0xb/0x2e [<ffffffff816b4805>] ? schedule_user+0x5/0x70 [<ffffffff816b4805>] ? schedule_user+0x5/0x70 [<ffffffff816b6824>] ? retint_careful+0x12/0x2e ------------[ cut here ]------------ What happened was that the function tracer traced the schedule_user() code that tells RCU that the system is coming back from userspace, and to add the CPU back to the RCU monitoring. Because the function tracer does a preempt_disable/enable_notrace() calls the preempt_enable_notrace() checks the NEED_RESCHED flag. If it is set, then preempt_schedule() is called. But this is called before the user_exit() function can inform the kernel that the CPU is no longer in user mode and needs to be accounted for by RCU. The fix is to create a new preempt_schedule_context() that checks if the kernel is still in user mode and if so to switch it to kernel mode before calling schedule. It also switches back to user mode coming back from schedule in need be. The only user of this currently is the preempt_enable_notrace(), which is only used by the tracing subsystem. Signed-off-by: Steven Rostedt <[email protected]> Signed-off-by: Peter Zijlstra <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Ingo Molnar <[email protected]>
2013-06-19sched: Fix clear NOHZ_BALANCE_KICKVincent Guittot1-4/+17
I have faced a sequence where the Idle Load Balance was sometime not triggered for a while on my platform, in the following scenario: CPU 0 and CPU 1 are running tasks and CPU 2 is idle CPU 1 kicks the Idle Load Balance CPU 1 selects CPU 2 as the new Idle Load Balancer CPU 2 sets NOHZ_BALANCE_KICK for CPU 2 CPU 2 sends a reschedule IPI to CPU 2 While CPU 3 wakes up, CPU 0 or CPU 1 migrates a waking up task A on CPU 2 CPU 2 finally wakes up, runs task A and discards the Idle Load Balance task A quickly goes back to sleep (before a tick occurs on CPU 2) CPU 2 goes back to idle with NOHZ_BALANCE_KICK set Whenever CPU 2 will be selected as the ILB, no reschedule IPI will be sent because NOHZ_BALANCE_KICK is already set and no Idle Load Balance will be performed. We must wait for the sched softirq to be raised on CPU 2 thanks to another part the kernel to come back to clear NOHZ_BALANCE_KICK. The proposed solution clears NOHZ_BALANCE_KICK in schedule_ipi if we can't raise the sched_softirq for the Idle Load Balance. Change since V1: - move the clear of NOHZ_BALANCE_KICK in got_nohz_idle_kick if the ILB can't run on this CPU (as suggested by Peter) Signed-off-by: Vincent Guittot <[email protected]> Signed-off-by: Peter Zijlstra <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Ingo Molnar <[email protected]>
2013-06-19perf: Add const qualifier to perf_pmu_register's 'name' argMischa Jonker1-1/+1
This allows us to use pdev->name for registering a PMU device. IMO the name is not supposed to be changed anyway. Signed-off-by: Mischa Jonker <[email protected]> Signed-off-by: Peter Zijlstra <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Ingo Molnar <[email protected]>
2013-06-19perf: Fix hypervisor branch sampling permission checkStephane Eranian1-2/+2
Commit 2b923c8 perf/x86: Check branch sampling priv level in generic code was missing the check for the hypervisor (HV) priv level, so add it back. With this patch, we get the following correct behavior: # echo 2 >/proc/sys/kernel/perf_event_paranoid $ perf record -j any,k noploop 1 Error: You may not have permission to collect stats. Consider tweaking /proc/sys/kernel/perf_event_paranoid: -1 - Not paranoid at all 0 - Disallow raw tracepoint access for unpriv 1 - Disallow cpu events for unpriv 2 - Disallow kernel profiling for unpriv $ perf record -j any,hv noploop 1 Error: You may not have permission to collect stats. Consider tweaking /proc/sys/kernel/perf_event_paranoid: -1 - Not paranoid at all 0 - Disallow raw tracepoint access for unpriv 1 - Disallow cpu events for unpriv 2 - Disallow kernel profiling for unpriv Signed-off-by: Stephane Eranian <[email protected]> Acked-by: Petr Matousek <[email protected]> Signed-off-by: Peter Zijlstra <[email protected]> Link: http://lkml.kernel.org/r/20130606090204.GA3725@quad Signed-off-by: Ingo Molnar <[email protected]>
2013-06-19Merge branch 'perf/urgent' into perf/coreIngo Molnar3-82/+185
Merge in the latest fixes, to avoid conflicts with ongoing work. Signed-off-by: Ingo Molnar <[email protected]>
2013-06-19perf: Fix mmap() accounting holePeter Zijlstra2-72/+159
Vince's fuzzer once again found holes. This time it spotted a leak in the locked page accounting. When an event had redirected output and its close() was the last reference to the buffer we didn't have a vm context to undo accounting. Change the code to destroy the buffer on the last munmap() and detach all redirected events at that time. This provides us the right context to undo the vm accounting. Reported-and-tested-by: Vince Weaver <[email protected]> Signed-off-by: Peter Zijlstra <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Cc: <[email protected]> Signed-off-by: Ingo Molnar <[email protected]>
2013-06-19cgroup: rename cont to cgrpLi Zefan1-11/+11
Cont is short for container. control group was named process container at first, but then people found container already has a meaning in linux kernel. Clean up the leftover variable name @cont. Signed-off-by: Li Zefan <[email protected]> Signed-off-by: Tejun Heo <[email protected]>
2013-06-18cgroup: clean up cgroup_serial_nr_cursorTejun Heo1-7/+8
cgroup_serial_nr_cursor was created atomic64_t because I thought it was never gonna used for anything other than assigning unique numbers to cgroups and didn't want to worry about synchronization; however, now we're using it as an event-stamp to distinguish cgroups created before and after certain point which assumes that it's protected by cgroup_mutex. Let's make it clear by making it a u64. Also, rename it to cgroup_serial_nr_next and make it point to the next nr to allocate so that where it's pointing to is clear and more conventional. Signed-off-by: Tejun Heo <[email protected]> Cc: Li Zefan <[email protected]>
2013-06-18cgroup: convert cgroup_cft_commit() to use cgroup_for_each_descendant_pre()Li Zefan1-36/+44
We used root->allcg_list to iterate cgroup hierarchy because at that time cgroup_for_each_descendant_pre() hasn't been invented. tj: In cgroup_cfts_commit(), s/@serial_nr/@update_upto/, move the assignment right above releasing cgroup_mutex and explain what's going on there. Signed-off-by: Li Zefan <[email protected]> Signed-off-by: Tejun Heo <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.