aboutsummaryrefslogtreecommitdiff
path: root/kernel
AgeCommit message (Collapse)AuthorFilesLines
2021-02-13Merge branch 'for-5.11-fixes' of ↵Linus Torvalds2-1/+6
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup Pull cgroup fixes from Tejun Heo: "Two cgroup fixes: - fix a NULL deref when trying to poll PSI in the root cgroup - fix confusing controller parsing corner case when mounting cgroup v1 hierarchies And doc / maintainer file updates" * 'for-5.11-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: cgroup: update PSI file description in docs cgroup: fix psi monitor for root cgroup MAINTAINERS: Update my email address MAINTAINERS: Remove stale URLs for cpuset cgroup-v1: add disabled controller check in cgroup1_parse_param()
2021-02-13driver core: lift dma_default_coherent into common codeChristoph Hellwig2-3/+2
Lift the dma_default_coherent variable from the mips architecture code to the driver core. This allows an architecture to sdefault all device to be DMA coherent at run time, even if the kernel is build with support for DMA noncoherent device. By allowing device_initialize to set the ->dma_coherent field to this default the amount of arch hooks required for this behavior can be greatly reduced. Signed-off-by: Christoph Hellwig <[email protected]> Acked-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Thomas Bogendoerfer <[email protected]>
2021-02-12bpf: Support pointers in global func argsDmitrii Banshchikov2-10/+75
Add an ability to pass a pointer to a type with known size in arguments of a global function. Such pointers may be used to overcome the limit on the maximum number of arguments, avoid expensive and tricky workarounds and to have multiple output arguments. A referenced type may contain pointers but indirect access through them isn't supported. The implementation consists of two parts. If a global function has an argument that is a pointer to a type with known size then: 1) In btf_check_func_arg_match(): check that the corresponding register points to NULL or to a valid memory region that is large enough to contain the expected argument's type. 2) In btf_prepare_func_args(): set the corresponding register type to PTR_TO_MEM_OR_NULL and its size to the size of the expected type. Only global functions are supported because allowance of pointers for static functions might break validation. Consider the following scenario. A static function has a pointer argument. A caller passes pointer to its stack memory. Because the callee can change referenced memory verifier cannot longer assume any particular slot type of the caller's stack memory hence the slot type is changed to SLOT_MISC. If there is an operation that relies on slot type other than SLOT_MISC then verifier won't be able to infer safety of the operation. When verifier sees a static function that has a pointer argument different from PTR_TO_CTX then it skips arguments check and continues with "inline" validation with more information available. The operation that relies on the particular slot type now succeeds. Because global functions were not allowed to have pointer arguments different from PTR_TO_CTX it's not possible to break existing and valid code. Signed-off-by: Dmitrii Banshchikov <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Acked-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-02-12bpf: Extract nullable reg type conversion into a helper functionDmitrii Banshchikov1-31/+52
Extract conversion from a register's nullable type to a type with a value. The helper will be used in mark_ptr_not_null_reg(). Signed-off-by: Dmitrii Banshchikov <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Acked-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-02-12bpf: Rename bpf_reg_state variablesDmitrii Banshchikov1-8/+12
Using "reg" for an array of bpf_reg_state and "reg[i + 1]" for an individual bpf_reg_state is error-prone and verbose. Use "regs" for the former and "reg" for the latter as other code nearby does. Signed-off-by: Dmitrii Banshchikov <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Acked-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-02-13bpf: Fix truncation handling for mod32 dst reg wrt zeroDaniel Borkmann1-4/+6
Recently noticed that when mod32 with a known src reg of 0 is performed, then the dst register is 32-bit truncated in verifier: 0: R1=ctx(id=0,off=0,imm=0) R10=fp0 0: (b7) r0 = 0 1: R0_w=inv0 R1=ctx(id=0,off=0,imm=0) R10=fp0 1: (b7) r1 = -1 2: R0_w=inv0 R1_w=inv-1 R10=fp0 2: (b4) w2 = -1 3: R0_w=inv0 R1_w=inv-1 R2_w=inv4294967295 R10=fp0 3: (9c) w1 %= w0 4: R0_w=inv0 R1_w=inv(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff)) R2_w=inv4294967295 R10=fp0 4: (b7) r0 = 1 5: R0_w=inv1 R1_w=inv(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff)) R2_w=inv4294967295 R10=fp0 5: (1d) if r1 == r2 goto pc+1 R0_w=inv1 R1_w=inv(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff)) R2_w=inv4294967295 R10=fp0 6: R0_w=inv1 R1_w=inv(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff)) R2_w=inv4294967295 R10=fp0 6: (b7) r0 = 2 7: R0_w=inv2 R1_w=inv(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff)) R2_w=inv4294967295 R10=fp0 7: (95) exit 7: R0=inv1 R1=inv(id=0,umin_value=4294967295,umax_value=4294967295,var_off=(0x0; 0xffffffff)) R2=inv4294967295 R10=fp0 7: (95) exit However, as a runtime result, we get 2 instead of 1, meaning the dst register does not contain (u32)-1 in this case. The reason is fairly straight forward given the 0 test leaves the dst register as-is: # ./bpftool p d x i 23 0: (b7) r0 = 0 1: (b7) r1 = -1 2: (b4) w2 = -1 3: (16) if w0 == 0x0 goto pc+1 4: (9c) w1 %= w0 5: (b7) r0 = 1 6: (1d) if r1 == r2 goto pc+1 7: (b7) r0 = 2 8: (95) exit This was originally not an issue given the dst register was marked as completely unknown (aka 64 bit unknown). However, after 468f6eafa6c4 ("bpf: fix 32-bit ALU op verification") the verifier casts the register output to 32 bit, and hence it becomes 32 bit unknown. Note that for the case where the src register is unknown, the dst register is marked 64 bit unknown. After the fix, the register is truncated by the runtime and the test passes: # ./bpftool p d x i 23 0: (b7) r0 = 0 1: (b7) r1 = -1 2: (b4) w2 = -1 3: (16) if w0 == 0x0 goto pc+2 4: (9c) w1 %= w0 5: (05) goto pc+1 6: (bc) w1 = w1 7: (b7) r0 = 1 8: (1d) if r1 == r2 goto pc+1 9: (b7) r0 = 2 10: (95) exit Semantics also match with {R,W}x mod{64,32} 0 -> {R,W}x. Invalid div has always been {R,W}x div{64,32} 0 -> 0. Rewrites are as follows: mod32: mod64: (16) if w0 == 0x0 goto pc+2 (15) if r0 == 0x0 goto pc+1 (9c) w1 %= w0 (9f) r1 %= r0 (05) goto pc+1 (bc) w1 = w1 Fixes: 468f6eafa6c4 ("bpf: fix 32-bit ALU op verification") Signed-off-by: Daniel Borkmann <[email protected]> Reviewed-by: John Fastabend <[email protected]> Acked-by: Alexei Starovoitov <[email protected]>
2021-02-13bpf, devmap: Use GFP_KERNEL for xdp bulk queue allocationJun'ichi Nomura1-3/+1
The devmap bulk queue is allocated with GFP_ATOMIC and the allocation may fail if there is no available space in existing percpu pool. Since commit 75ccae62cb8d42 ("xdp: Move devmap bulk queue into struct net_device") moved the bulk queue allocation to NETDEV_REGISTER callback, whose context is allowed to sleep, use GFP_KERNEL instead of GFP_ATOMIC to let percpu allocator extend the pool when needed and avoid possible failure of netdev registration. As the required alignment is natural, we can simply use alloc_percpu(). Fixes: 75ccae62cb8d42 ("xdp: Move devmap bulk queue into struct net_device") Signed-off-by: Jun'ichi Nomura <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Cc: Toke Høiland-Jørgensen <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-02-12bpf: Fix an unitialized value in bpf_iterYonghong Song1-1/+1
Commit 15d83c4d7cef ("bpf: Allow loading of a bpf_iter program") cached btf_id in struct bpf_iter_target_info so later on if it can be checked cheaply compared to checking registered names. syzbot found a bug that uninitialized value may occur to bpf_iter_target_info->btf_id. This is because we allocated bpf_iter_target_info structure with kmalloc and never initialized field btf_id afterwards. This uninitialized btf_id is typically compared to a u32 bpf program func proto btf_id, and the chance of being equal is extremely slim. This patch fixed the issue by using kzalloc which will also prevent future likely instances due to adding new fields. Fixes: 15d83c4d7cef ("bpf: Allow loading of a bpf_iter program") Reported-by: [email protected] Signed-off-by: Yonghong Song <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-02-12bpf: Allow bpf_d_path in bpf_iter programSong Liu1-0/+4
task_file and task_vma iter programs have access to file->f_path. Enable bpf_d_path to print paths of these file. Signed-off-by: Song Liu <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Acked-by: Yonghong Song <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-02-12bpf: Introduce task_vma bpf_iterSong Liu1-1/+266
Introduce task_vma bpf_iter to print memory information of a process. It can be used to print customized information similar to /proc/<pid>/maps. Current /proc/<pid>/maps and /proc/<pid>/smaps provide information of vma's of a process. However, these information are not flexible enough to cover all use cases. For example, if a vma cover mixed 2MB pages and 4kB pages (x86_64), there is no easy way to tell which address ranges are backed by 2MB pages. task_vma solves the problem by enabling the user to generate customize information based on the vma (and vma->vm_mm, vma->vm_file, etc.). To access the vma safely in the BPF program, task_vma iterator holds target mmap_lock while calling the BPF program. If the mmap_lock is contended, task_vma unlocks mmap_lock between iterations to unblock the writer(s). This lock contention avoidance mechanism is similar to the one used in show_smaps_rollup(). Signed-off-by: Song Liu <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Acked-by: Yonghong Song <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-02-12Merge tag 'trace-v5.11-rc7-2' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing fix from Steven Rostedt: "Fix buffer overflow in trace event filter. It was reported that if an trace event was larger than a page and was filtered, that it caused memory corruption. The reason is that filtered events first go into a buffer to test the filter before being written into the ring buffer. Unfortunately, this write did not check the size" * tag 'trace-v5.11-rc7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Check length before giving out the filter buffer
2021-02-12Merge tag 'kvmarm-5.12' of ↵Paolo Bonzini2-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD KVM/arm64 updates for Linux 5.12 - Make the nVHE EL2 object relocatable, resulting in much more maintainable code - Handle concurrent translation faults hitting the same page in a more elegant way - Support for the standard TRNG hypervisor call - A bunch of small PMU/Debug fixes - Allow the disabling of symbol export from assembly code - Simplification of the early init hypercall handling
2021-02-12PM: sleep: Constify static struct attribute_groupRikard Falkeborn1-1/+1
The only usage of suspend_attr_group is to put its address in an array of pointers to const attribute_group structs. Make it const to allow the compiler to put it into read-only memory. Signed-off-by: Rikard Falkeborn <[email protected]> Signed-off-by: Rafael J. Wysocki <[email protected]>
2021-02-12PM: Kconfig: remove unneeded "default n" optionsLukasz Luba1-3/+0
Remove "default n" options. If the "default" line is removed, it defaults to 'n'. Signed-off-by: Lukasz Luba <[email protected]> Signed-off-by: Rafael J. Wysocki <[email protected]>
2021-02-12PM: EM: update Kconfig description and drop "default n" optionLukasz Luba1-5/+4
Energy Model supports now other devices like GPUs, DSPs, not only CPUs. Thus, update the description in the config option. Remove also unneeded "default n". If the "default" line is removed, it defaults to 'n'. Signed-off-by: Lukasz Luba <[email protected]> Signed-off-by: Rafael J. Wysocki <[email protected]>
2021-02-12Merge branch 'for-mingo-rcu' of ↵Ingo Molnar21-269/+1486
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu into core/rcu Pull RCU updates from Paul E. McKenney: - Documentation updates. - Miscellaneous fixes. - kfree_rcu() updates: Addition of mem_dump_obj() to provide allocator return addresses to more easily locate bugs. This has a couple of RCU-related commits, but is mostly MM. Was pulled in with akpm's agreement. - Per-callback-batch tracking of numbers of callbacks, which enables better debugging information and smarter reactions to large numbers of callbacks. - The first round of changes to allow CPUs to be runtime switched from and to callback-offloaded state. - CONFIG_PREEMPT_RT-related changes. - RCU CPU stall warning updates. - Addition of polling grace-period APIs for SRCU. - Torture-test and torture-test scripting updates, including a "torture everything" script that runs rcutorture, locktorture, scftorture, rcuscale, and refscale. Plus does an allmodconfig build. Signed-off-by: Ingo Molnar <[email protected]>
2021-02-12Merge branch 'for-mingo-kcsan' of ↵Ingo Molnar1-13/+13
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu into locking/core Pull KCSAN updates from Paul E. McKenney: "Kernel concurrency sanitizer (KCSAN) updates from Marco Elver." Signed-off-by: Ingo Molnar <[email protected]>
2021-02-12Merge branch 'linus' into locking/core, to pick up upstream fixesIngo Molnar44-298/+458
Signed-off-by: Ingo Molnar <[email protected]>
2021-02-11bpf: Fix subreg optimization for BPF_FETCHIlya Leoshkevich1-2/+21
All 32-bit variants of BPF_FETCH (add, and, or, xor, xchg, cmpxchg) define a 32-bit subreg and thus have zext_dst set. Their encoding, however, uses dst_reg field as a base register, which causes opt_subreg_zext_lo32_rnd_hi32() to zero-extend said base register instead of the one the insn really defines (r0 or src_reg). Fix by properly choosing a register being defined, similar to how check_atomic() already does that. Signed-off-by: Ilya Leoshkevich <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-02-11bpf: Clear per_cpu pointers during bpf_prog_reallocAlexei Starovoitov1-0/+2
bpf_prog_realloc copies contents of struct bpf_prog. The pointers have to be cleared before freeing old struct. Reported-by: Ilya Leoshkevich <[email protected]> Fixes: 700d4796ef59 ("bpf: Optimize program stats") Fixes: ca06f55b9002 ("bpf: Add per-program recursion prevention mechanism") Signed-off-by: Alexei Starovoitov <[email protected]>
2021-02-11bpf: Expose bpf_get_socket_cookie to tracing programsFlorent Revest1-0/+2
This needs a new helper that: - can work in a sleepable context (using sock_gen_cookie) - takes a struct sock pointer and checks that it's not NULL Signed-off-by: Florent Revest <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Acked-by: KP Singh <[email protected]> Acked-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-02-11tracing: Check length before giving out the filter bufferSteven Rostedt (VMware)1-1/+1
When filters are used by trace events, a page is allocated on each CPU and used to copy the trace event fields to this page before writing to the ring buffer. The reason to use the filter and not write directly into the ring buffer is because a filter may discard the event and there's more overhead on discarding from the ring buffer than the extra copy. The problem here is that there is no check against the size being allocated when using this page. If an event asks for more than a page size while being filtered, it will get only a page, leading to the caller writing more that what was allocated. Check the length of the request, and if it is more than PAGE_SIZE minus the header default back to allocating from the ring buffer directly. The ring buffer may reject the event if its too big anyway, but it wont overflow. Link: https://lore.kernel.org/ath10k/[email protected]/ Cc: [email protected] Fixes: 0fc1b09ff1ff4 ("tracing: Use temp buffer when filtering events") Reported-by: Wen Gong <[email protected]> Signed-off-by: Steven Rostedt (VMware) <[email protected]>
2021-02-11bpf: Allows per-cpu maps and map-in-map in sleepable programsAlexei Starovoitov2-3/+8
Since sleepable programs are now executing under migrate_disable the per-cpu maps are safe to use. The map-in-map were ok to use in sleepable from the time sleepable progs were introduced. Note that non-preallocated maps are still not safe, since there is no rcu_read_lock yet in sleepable programs and dynamically allocated map elements are relying on rcu protection. The sleepable programs have rcu_read_lock_trace instead. That limitation will be addresses in the future. Signed-off-by: Alexei Starovoitov <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Acked-by: Andrii Nakryiko <[email protected]> Acked-by: KP Singh <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-02-11bpf: Count the number of times recursion was preventedAlexei Starovoitov2-6/+26
Add per-program counter for number of times recursion prevention mechanism was triggered and expose it via show_fdinfo and bpf_prog_info. Teach bpftool to print it. Signed-off-by: Alexei Starovoitov <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Acked-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-02-11bpf: Add per-program recursion prevention mechanismAlexei Starovoitov2-4/+27
Since both sleepable and non-sleepable programs execute under migrate_disable add recursion prevention mechanism to both types of programs when they're executed via bpf trampoline. Signed-off-by: Alexei Starovoitov <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Acked-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-02-11bpf: Compute program stats for sleepable programsAlexei Starovoitov1-14/+28
Since sleepable programs don't migrate from the cpu the excution stats can be computed for them as well. Reuse the same infrastructure for both sleepable and non-sleepable programs. run_cnt -> the number of times the program was executed. run_time_ns -> the program execution time in nanoseconds including the off-cpu time when the program was sleeping. Signed-off-by: Alexei Starovoitov <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Acked-by: Andrii Nakryiko <[email protected]> Acked-by: KP Singh <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-02-11bpf: Run sleepable programs with migration disabledAlexei Starovoitov1-0/+2
In older non-RT kernels migrate_disable() was the same as preempt_disable(). Since commit 74d862b682f5 ("sched: Make migrate_disable/enable() independent of RT") migrate_disable() is real and doesn't prevent sleeping. Running sleepable programs with migration disabled allows to add support for program stats and per-cpu maps later. Signed-off-by: Alexei Starovoitov <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Acked-by: KP Singh <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-02-11bpf: Optimize program statsAlexei Starovoitov4-7/+7
Move bpf_prog_stats from prog->aux into prog to avoid one extra load in critical path of program execution. Signed-off-by: Alexei Starovoitov <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Acked-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-02-11locking/arch: Move qrwlock.h include after qspinlock.hWaiman Long1-1/+0
include/asm-generic/qrwlock.h was trying to get arch_spin_is_locked via asm-generic/qspinlock.h. However, this does not work because architectures might be using queued rwlocks but not queued spinlocks (csky), or because they might be defining their own queued_* macros before including asm/qspinlock.h. To fix this, ensure that asm/spinlock.h always includes qrwlock.h after defining arch_spin_is_locked (either directly for csky, or via asm/qspinlock.h for other architectures). The only inclusion elsewhere is in kernel/locking/qrwlock.c. That one is really unnecessary because the file is only compiled in SMP configurations (config QUEUED_RWLOCKS depends on SMP) and in that case linux/spinlock.h already includes asm/qrwlock.h if needed, via asm/spinlock.h. Reported-by: Guenter Roeck <[email protected]> Signed-off-by: Waiman Long <[email protected]> Fixes: 26128cb6c7e6 ("locking/rwlocks: Add contention detection for rwlocks") Tested-by: Guenter Roeck <[email protected]> Reviewed-by: Ben Gardon <[email protected]> [Add arch/sparc and kernel/locking parts per discussion with Waiman. - Paolo] Signed-off-by: Paolo Bonzini <[email protected]>
2021-02-10bpf_lru_list: Read double-checked variable once without lockMarco Elver1-3/+4
For double-checked locking in bpf_common_lru_push_free(), node->type is read outside the critical section and then re-checked under the lock. However, concurrent writes to node->type result in data races. For example, the following concurrent access was observed by KCSAN: write to 0xffff88801521bc22 of 1 bytes by task 10038 on cpu 1: __bpf_lru_node_move_in kernel/bpf/bpf_lru_list.c:91 __local_list_flush kernel/bpf/bpf_lru_list.c:298 ... read to 0xffff88801521bc22 of 1 bytes by task 10043 on cpu 0: bpf_common_lru_push_free kernel/bpf/bpf_lru_list.c:507 bpf_lru_push_free kernel/bpf/bpf_lru_list.c:555 ... Fix the data races where node->type is read outside the critical section (for double-checked locking) by marking the access with READ_ONCE() as well as ensuring the variable is only accessed once. Fixes: 3a08c2fd7634 ("bpf: LRU List") Reported-by: [email protected] Reported-by: [email protected] Signed-off-by: Marco Elver <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Acked-by: Martin KaFai Lau <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-02-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller14-76/+90
2021-02-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds3-21/+22
Pull networking fixes from David Miller: "Another pile of networing fixes: 1) ath9k build error fix from Arnd Bergmann 2) dma memory leak fix in mediatec driver from Lorenzo Bianconi. 3) bpf int3 kprobe fix from Alexei Starovoitov. 4) bpf stackmap integer overflow fix from Bui Quang Minh. 5) Add usb device ids for Cinterion MV31 to qmi_qwwan driver, from Christoph Schemmel. 6) Don't update deleted entry in xt_recent netfilter module, from Jazsef Kadlecsik. 7) Use after free in nftables, fix from Pablo Neira Ayuso. 8) Header checksum fix in flowtable from Sven Auhagen. 9) Validate user controlled length in qrtr code, from Sabyrzhan Tasbolatov. 10) Fix race in xen/netback, from Juergen Gross, 11) New device ID in cxgb4, from Raju Rangoju. 12) Fix ring locking in rxrpc release call, from David Howells. 13) Don't return LAPB error codes from x25_open(), from Xie He. 14) Missing error returns in gsi_channel_setup() from Alex Elder. 15) Get skb_copy_and_csum_datagram working properly with odd segment sizes, from Willem de Bruijn. 16) Missing RFS/RSS table init in enetc driver, from Vladimir Oltean. 17) Do teardown on probe failure in DSA, from Vladimir Oltean. 18) Fix compilation failures of txtimestamp selftest, from Vadim Fedorenko. 19) Limit rx per-napi gro queue size to fix latency regression, from Eric Dumazet. 20) dpaa_eth xdp fixes from Camelia Groza. 21) Missing txq mode update when switching CBS off, in stmmac driver, from Mohammad Athari Bin Ismail. 22) Failover pending logic fix in ibmvnic driver, from Sukadev Bhattiprolu. 23) Null deref fix in vmw_vsock, from Norbert Slusarek. 24) Missing verdict update in xdp paths of ena driver, from Shay Agroskin. 25) seq_file iteration fix in sctp from Neil Brown. 26) bpf 32-bit src register truncation fix on div/mod, from Daniel Borkmann. 27) Fix jmp32 pruning in bpf verifier, from Daniel Borkmann. 28) Fix locking in vsock_shutdown(), from Stefano Garzarella. 29) Various missing index bound checks in hns3 driver, from Yufeng Mo. 30) Flush ports on .phylink_mac_link_down() in dsa felix driver, from Vladimir Oltean. 31) Don't mix up stp and mrp port states in bridge layer, from Horatiu Vultur. 32) Fix locking during netif_tx_disable(), from Edwin Peer" * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (45 commits) bpf: Fix 32 bit src register truncation on div/mod bpf: Fix verifier jmp32 pruning decision logic bpf: Fix verifier jsgt branch analysis on max bound vsock: fix locking in vsock_shutdown() net: hns3: add a check for index in hclge_get_rss_key() net: hns3: add a check for tqp_index in hclge_get_ring_chain_from_mbx() net: hns3: add a check for queue_id in hclge_reset_vf_queue() net: dsa: felix: implement port flushing on .phylink_mac_link_down switchdev: mrp: Remove SWITCHDEV_ATTR_ID_MRP_PORT_STAT bridge: mrp: Fix the usage of br_mrp_port_switchdev_set_state net: watchdog: hold device global xmit lock during tx disable netfilter: nftables: relax check for stateful expressions in set definition netfilter: conntrack: skip identical origin tuple in same zone only vsock/virtio: update credit only if socket is not closed net: fix iteration for sctp transport seq_files net: ena: Update XDP verdict upon failure net/vmw_vsock: improve locking in vsock_connect_timeout() net/vmw_vsock: fix NULL pointer dereference ibmvnic: Clear failover_pending if unable to schedule net: stmmac: set TxQ mode back to DCB after disabling CBS ...
2021-02-10bpf: Allow variable-offset stack accessAndrei Matei1-146/+511
Before this patch, variable offset access to the stack was dissalowed for regular instructions, but was allowed for "indirect" accesses (i.e. helpers). This patch removes the restriction, allowing reading and writing to the stack through stack pointers with variable offsets. This makes stack-allocated buffers more usable in programs, and brings stack pointers closer to other types of pointers. The motivation is being able to use stack-allocated buffers for data manipulation. When the stack size limit is sufficient, allocating buffers on the stack is simpler than per-cpu arrays, or other alternatives. In unpriviledged programs, variable-offset reads and writes are disallowed (they were already disallowed for the indirect access case) because the speculative execution checking code doesn't support them. Additionally, when writing through a variable-offset stack pointer, if any pointers are in the accessible range, there's possilibities of later leaking pointers because the write cannot be tracked precisely. Writes with variable offset mark the whole range as initialized, even though we don't know which stack slots are actually written. This is in order to not reject future reads to these slots. Note that this doesn't affect writes done through helpers; like before, helpers need the whole stack range to be initialized to begin with. All the stack slots are in range are considered scalars after the write; variable-offset register spills are not tracked. For reads, all the stack slots in the variable range needs to be initialized (but see above about what writes do), otherwise the read is rejected. All register spilled in stack slots that might be read are marked as having been read, however reads through such pointers don't do register filling; the target register will always be either a scalar or a constant zero. Signed-off-by: Andrei Matei <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-02-10locking/mutex: Kill mutex_trylock_recursive()Sebastian Andrzej Siewior1-10/+0
There are not users of mutex_trylock_recursive() in tree as of v5.11-rc7. Remove it. Signed-off-by: Sebastian Andrzej Siewior <[email protected]> Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Link: https://lkml.kernel.org/r/[email protected]
2021-02-10lockdep: Noinstr annotate warn_bogus_irq_restore()Peter Zijlstra1-1/+3
vmlinux.o: warning: objtool: lock_is_held_type()+0x107: call to warn_bogus_irq_restore() leaves .noinstr.text section As per the general rule that WARNs are allowed to violate noinstr to get out, annotate it away. Fixes: 997acaf6b4b5 ("lockdep: report broken irq restoration") Reported-by: Randy Dunlap <[email protected]> Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Acked-by: Mark Rutland <[email protected]> Acked-by: Randy Dunlap <[email protected]> # build-tested Link: https://lkml.kernel.org/r/[email protected]
2021-02-10bpf: Fix 32 bit src register truncation on div/modDaniel Borkmann1-15/+13
While reviewing a different fix, John and I noticed an oddity in one of the BPF program dumps that stood out, for example: # bpftool p d x i 13 0: (b7) r0 = 808464450 1: (b4) w4 = 808464432 2: (bc) w0 = w0 3: (15) if r0 == 0x0 goto pc+1 4: (9c) w4 %= w0 [...] In line 2 we noticed that the mov32 would 32 bit truncate the original src register for the div/mod operation. While for the two operations the dst register is typically marked unknown e.g. from adjust_scalar_min_max_vals() the src register is not, and thus verifier keeps tracking original bounds, simplified: 0: R1=ctx(id=0,off=0,imm=0) R10=fp0 0: (b7) r0 = -1 1: R0_w=invP-1 R1=ctx(id=0,off=0,imm=0) R10=fp0 1: (b7) r1 = -1 2: R0_w=invP-1 R1_w=invP-1 R10=fp0 2: (3c) w0 /= w1 3: R0_w=invP(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff)) R1_w=invP-1 R10=fp0 3: (77) r1 >>= 32 4: R0_w=invP(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff)) R1_w=invP4294967295 R10=fp0 4: (bf) r0 = r1 5: R0_w=invP4294967295 R1_w=invP4294967295 R10=fp0 5: (95) exit processed 6 insns (limit 1000000) max_states_per_insn 0 total_states 0 peak_states 0 mark_read 0 Runtime result of r0 at exit is 0 instead of expected -1. Remove the verifier mov32 src rewrite in div/mod and replace it with a jmp32 test instead. After the fix, we result in the following code generation when having dividend r1 and divisor r6: div, 64 bit: div, 32 bit: 0: (b7) r6 = 8 0: (b7) r6 = 8 1: (b7) r1 = 8 1: (b7) r1 = 8 2: (55) if r6 != 0x0 goto pc+2 2: (56) if w6 != 0x0 goto pc+2 3: (ac) w1 ^= w1 3: (ac) w1 ^= w1 4: (05) goto pc+1 4: (05) goto pc+1 5: (3f) r1 /= r6 5: (3c) w1 /= w6 6: (b7) r0 = 0 6: (b7) r0 = 0 7: (95) exit 7: (95) exit mod, 64 bit: mod, 32 bit: 0: (b7) r6 = 8 0: (b7) r6 = 8 1: (b7) r1 = 8 1: (b7) r1 = 8 2: (15) if r6 == 0x0 goto pc+1 2: (16) if w6 == 0x0 goto pc+1 3: (9f) r1 %= r6 3: (9c) w1 %= w6 4: (b7) r0 = 0 4: (b7) r0 = 0 5: (95) exit 5: (95) exit x86 in particular can throw a 'divide error' exception for div instruction not only for divisor being zero, but also for the case when the quotient is too large for the designated register. For the edx:eax and rdx:rax dividend pair it is not an issue in x86 BPF JIT since we always zero edx (rdx). Hence really the only protection needed is against divisor being zero. Fixes: 68fda450a7df ("bpf: fix 32-bit divide by zero") Co-developed-by: John Fastabend <[email protected]> Signed-off-by: John Fastabend <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Acked-by: Alexei Starovoitov <[email protected]>
2021-02-10bpf: Fix verifier jmp32 pruning decision logicDaniel Borkmann1-1/+5
Anatoly has been fuzzing with kBdysch harness and reported a hang in one of the outcomes: func#0 @0 0: R1=ctx(id=0,off=0,imm=0) R10=fp0 0: (b7) r0 = 808464450 1: R0_w=invP808464450 R1=ctx(id=0,off=0,imm=0) R10=fp0 1: (b4) w4 = 808464432 2: R0_w=invP808464450 R1=ctx(id=0,off=0,imm=0) R4_w=invP808464432 R10=fp0 2: (9c) w4 %= w0 3: R0_w=invP808464450 R1=ctx(id=0,off=0,imm=0) R4_w=invP(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff)) R10=fp0 3: (66) if w4 s> 0x30303030 goto pc+0 R0_w=invP808464450 R1=ctx(id=0,off=0,imm=0) R4_w=invP(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff),s32_max_value=808464432) R10=fp0 4: R0_w=invP808464450 R1=ctx(id=0,off=0,imm=0) R4_w=invP(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff),s32_max_value=808464432) R10=fp0 4: (7f) r0 >>= r0 5: R0_w=invP(id=0) R1=ctx(id=0,off=0,imm=0) R4_w=invP(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff),s32_max_value=808464432) R10=fp0 5: (9c) w4 %= w0 6: R0_w=invP(id=0) R1=ctx(id=0,off=0,imm=0) R4_w=invP(id=0) R10=fp0 6: (66) if w0 s> 0x3030 goto pc+0 R0_w=invP(id=0,s32_max_value=12336) R1=ctx(id=0,off=0,imm=0) R4_w=invP(id=0) R10=fp0 7: R0=invP(id=0,s32_max_value=12336) R1=ctx(id=0,off=0,imm=0) R4=invP(id=0) R10=fp0 7: (d6) if w0 s<= 0x303030 goto pc+1 9: R0=invP(id=0,s32_max_value=12336) R1=ctx(id=0,off=0,imm=0) R4=invP(id=0) R10=fp0 9: (95) exit propagating r0 from 6 to 7: safe 4: R0_w=invP808464450 R1=ctx(id=0,off=0,imm=0) R4_w=invP(id=0,umin_value=808464433,umax_value=2147483647,var_off=(0x0; 0x7fffffff)) R10=fp0 4: (7f) r0 >>= r0 5: R0_w=invP(id=0) R1=ctx(id=0,off=0,imm=0) R4_w=invP(id=0,umin_value=808464433,umax_value=2147483647,var_off=(0x0; 0x7fffffff)) R10=fp0 5: (9c) w4 %= w0 6: R0_w=invP(id=0) R1=ctx(id=0,off=0,imm=0) R4_w=invP(id=0) R10=fp0 6: (66) if w0 s> 0x3030 goto pc+0 R0_w=invP(id=0,s32_max_value=12336) R1=ctx(id=0,off=0,imm=0) R4_w=invP(id=0) R10=fp0 propagating r0 7: safe propagating r0 from 6 to 7: safe processed 15 insns (limit 1000000) max_states_per_insn 0 total_states 1 peak_states 1 mark_read 1 The underlying program was xlated as follows: # bpftool p d x i 10 0: (b7) r0 = 808464450 1: (b4) w4 = 808464432 2: (bc) w0 = w0 3: (15) if r0 == 0x0 goto pc+1 4: (9c) w4 %= w0 5: (66) if w4 s> 0x30303030 goto pc+0 6: (7f) r0 >>= r0 7: (bc) w0 = w0 8: (15) if r0 == 0x0 goto pc+1 9: (9c) w4 %= w0 10: (66) if w0 s> 0x3030 goto pc+0 11: (d6) if w0 s<= 0x303030 goto pc+1 12: (05) goto pc-1 13: (95) exit The verifier rewrote original instructions it recognized as dead code with 'goto pc-1', but reality differs from verifier simulation in that we are actually able to trigger a hang due to hitting the 'goto pc-1' instructions. Taking a closer look at the verifier analysis, the reason is that it misjudges its pruning decision at the first 'from 6 to 7: safe' occasion. What happens is that while both old/cur registers are marked as precise, they get misjudged for the jmp32 case as range_within() yields true, meaning that the prior verification path with a wider register bound could be verified successfully and therefore the current path with a narrower register bound is deemed safe as well whereas in reality it's not. R0 old/cur path's bounds compare as follows: old: smin_value=0x8000000000000000,smax_value=0x7fffffffffffffff,umin_value=0x0,umax_value=0xffffffffffffffff,var_off=(0x0; 0xffffffffffffffff) cur: smin_value=0x8000000000000000,smax_value=0x7fffffff7fffffff,umin_value=0x0,umax_value=0xffffffff7fffffff,var_off=(0x0; 0xffffffff7fffffff) old: s32_min_value=0x80000000,s32_max_value=0x00003030,u32_min_value=0x00000000,u32_max_value=0xffffffff cur: s32_min_value=0x00003031,s32_max_value=0x7fffffff,u32_min_value=0x00003031,u32_max_value=0x7fffffff The 64 bit bounds generally look okay and while the information that got propagated from 32 to 64 bit looks correct as well, it's not precise enough for judging a conditional jmp32. Given the latter only operates on subregisters we also need to take these into account as well for a range_within() probe in order to be able to prune paths. Extending the range_within() constraint to both bounds will be able to tell us that the old signed 32 bit bounds are not wider than the cur signed 32 bit bounds. With the fix in place, the program will now verify the 'goto' branch case as it should have been: [...] 6: R0_w=invP(id=0) R1=ctx(id=0,off=0,imm=0) R4_w=invP(id=0) R10=fp0 6: (66) if w0 s> 0x3030 goto pc+0 R0_w=invP(id=0,s32_max_value=12336) R1=ctx(id=0,off=0,imm=0) R4_w=invP(id=0) R10=fp0 7: R0=invP(id=0,s32_max_value=12336) R1=ctx(id=0,off=0,imm=0) R4=invP(id=0) R10=fp0 7: (d6) if w0 s<= 0x303030 goto pc+1 9: R0=invP(id=0,s32_max_value=12336) R1=ctx(id=0,off=0,imm=0) R4=invP(id=0) R10=fp0 9: (95) exit 7: R0_w=invP(id=0,smax_value=9223372034707292159,umax_value=18446744071562067967,var_off=(0x0; 0xffffffff7fffffff),s32_min_value=12337,u32_min_value=12337,u32_max_value=2147483647) R1=ctx(id=0,off=0,imm=0) R4_w=invP(id=0) R10=fp0 7: (d6) if w0 s<= 0x303030 goto pc+1 R0_w=invP(id=0,smax_value=9223372034707292159,umax_value=18446744071562067967,var_off=(0x0; 0xffffffff7fffffff),s32_min_value=3158065,u32_min_value=3158065,u32_max_value=2147483647) R1=ctx(id=0,off=0,imm=0) R4_w=invP(id=0) R10=fp0 8: R0_w=invP(id=0,smax_value=9223372034707292159,umax_value=18446744071562067967,var_off=(0x0; 0xffffffff7fffffff),s32_min_value=3158065,u32_min_value=3158065,u32_max_value=2147483647) R1=ctx(id=0,off=0,imm=0) R4_w=invP(id=0) R10=fp0 8: (30) r0 = *(u8 *)skb[808464432] BPF_LD_[ABS|IND] uses reserved fields processed 11 insns (limit 1000000) max_states_per_insn 1 total_states 1 peak_states 1 mark_read 1 The bug is quite subtle in the sense that when verifier would determine that a given branch is dead code, it would (here: wrongly) remove these instructions from the program and hard-wire the taken branch for privileged programs instead of the 'goto pc-1' rewrites which will cause hard to debug problems. Fixes: 3f50f132d840 ("bpf: Verifier, do explicit ALU32 bounds tracking") Reported-by: Anatoly Trosinenko <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Reviewed-by: John Fastabend <[email protected]> Acked-by: Alexei Starovoitov <[email protected]>
2021-02-10bpf: Fix verifier jsgt branch analysis on max boundDaniel Borkmann1-2/+2
Fix incorrect is_branch{32,64}_taken() analysis for the jsgt case. The return code for both will tell the caller whether a given conditional jump is taken or not, e.g. 1 means branch will be taken [for the involved registers] and the goto target will be executed, 0 means branch will not be taken and instead we fall-through to the next insn, and last but not least a -1 denotes that it is not known at verification time whether a branch will be taken or not. Now while the jsgt has the branch-taken case correct with reg->s32_min_value > sval, the branch-not-taken case is off-by-one when testing for reg->s32_max_value < sval since the branch will also be taken for reg->s32_max_value == sval. The jgt branch analysis, for example, gets this right. Fixes: 3f50f132d840 ("bpf: Verifier, do explicit ALU32 bounds tracking") Fixes: 4f7b3e82589e ("bpf: improve verifier branch analysis") Signed-off-by: Daniel Borkmann <[email protected]> Reviewed-by: John Fastabend <[email protected]> Acked-by: Alexei Starovoitov <[email protected]>
2021-02-08Merge tag 'trace-v5.11-rc7' of ↵Linus Torvalds1-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing fix from Steven Rostedt: "Fix output of top level event tracing 'enable' file. When writing a tool for enabling events in the tracing system, an anomaly was discovered. The top level event 'enable' file would never show '1' when all events were enabled. The system and event 'enable' files worked as expected. The reason was because the top level event 'enable' file included the 'ftrace' tracer events, which are not controlled by the 'enable' file and would cause the output to be wrong. This appears to have been a bug since it was created" * tag 'trace-v5.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Do not count ftrace events in top level enable output
2021-02-07Merge tag 'dma-mapping-5.11-2' of git://git.infradead.org/users/hch/dma-mappingLinus Torvalds1-1/+1
Pull dma-mapping fix from Christoph Hellwig: "Fix a 32 vs 64-bit padding issue in the new benchmark code (Barry Song)" * tag 'dma-mapping-5.11-2' of git://git.infradead.org/users/hch/dma-mapping: dma-mapping: benchmark: use u8 for reserved field in uAPI structure
2021-02-07Merge tag 'irq_urgent_for_v5.11_rc7' of ↵Linus Torvalds1-24/+20
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fixes from Borislav Petkov: - Prevent device managed IRQ allocation helpers from returning IRQ 0 - A fix for MSI activation of PCI endpoints with multiple MSIs * tag 'irq_urgent_for_v5.11_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: genirq: Prevent [devm_]irq_alloc_desc from returning irq 0 genirq/msi: Activate Multi-MSI early when MSI_FLAG_ACTIVATE_EARLY is set
2021-02-07Merge tag 'core_urgent_for_v5.11_rc7' of ↵Linus Torvalds2-12/+4
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull syscall entry fixes from Borislav Petkov: - For syscall user dispatch, separate prctl operation from syscall redirection range specification before the API has been made official in 5.11. - Ensure tasks using the generic syscall code do trap after returning from a syscall when single-stepping is requested. * tag 'core_urgent_for_v5.11_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: entry: Use different define for selector variable in SUD entry: Ensure trap after single-step on system call return
2021-02-07Merge tag 'timers_urgent_for_v5.11_rc7' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fixes from Borislav Petkov: "Two more timers-related fixes for v5.11: - Use a freezable workqueue for RTC sync because the sync can happen at any time and trigger suspend assertion checks in the i2c subsystem. - Correct a previous RTC validation change to check only bit 6 in register D because some Intel machines use bits 0-5" * tag 'timers_urgent_for_v5.11_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: ntp: Use freezable workqueue for RTC synchronization rtc: mc146818: Dont test for bit 0-5 in Register D
2021-02-06entry: Use different define for selector variable in SUDGabriel Krisman Bertazi1-2/+2
Michael Kerrisk suggested that, from an API perspective, it is a bad idea to share the PR_SYS_DISPATCH_ defines between the prctl operation and the selector variable. Therefore, define two new constants to be used by SUD's selector variable and update the corresponding documentation and test cases. While this changes the API syscall user dispatch has never been part of a Linux release, it will show up for the first time in 5.11. Suggested-by: Michael Kerrisk (man-pages) <[email protected]> Signed-off-by: Gabriel Krisman Bertazi <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2021-02-06entry: Ensure trap after single-step on system call returnGabriel Krisman Bertazi1-10/+2
Commit 299155244770 ("entry: Drop usage of TIF flags in the generic syscall code") introduced a bug on architectures using the generic syscall entry code, in which processes stopped by PTRACE_SYSCALL do not trap on syscall return after receiving a TIF_SINGLESTEP. The reason is that the meaning of TIF_SINGLESTEP flag is overloaded to cause the trap after a system call is executed, but since the above commit, the syscall call handler only checks for the SYSCALL_WORK flags on the exit work. Split the meaning of TIF_SINGLESTEP such that it only means single-step mode, and create a new type of SYSCALL_WORK to request a trap immediately after a syscall in single-step mode. In the current implementation, the SYSCALL_WORK flag shadows the TIF_SINGLESTEP flag for simplicity. Update x86 to flip this bit when a tracer enables single stepping. Fixes: 299155244770 ("entry: Drop usage of TIF flags in the generic syscall code") Suggested-by: Linus Torvalds <[email protected]> Signed-off-by: Gabriel Krisman Bertazi <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Tested-by: Kyle Huey <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2021-02-05tracing: Do not count ftrace events in top level enable outputSteven Rostedt (VMware)1-1/+2
The file /sys/kernel/tracing/events/enable is used to enable all events by echoing in "1", or disabling all events when echoing in "0". To know if all events are enabled, disabled, or some are enabled but not all of them, cating the file should show either "1" (all enabled), "0" (all disabled), or "X" (some enabled but not all of them). This works the same as the "enable" files in the individule system directories (like tracing/events/sched/enable). But when all events are enabled, the top level "enable" file shows "X". The reason is that its checking the "ftrace" events, which are special events that only exist for their format files. These include the format for the function tracer events, that are enabled when the function tracer is enabled, but not by the "enable" file. The check includes these events, which will always be disabled, and even though all true events are enabled, the top level "enable" file will show "X" instead of "1". To fix this, have the check test the event's flags to see if it has the "IGNORE_ENABLE" flag set, and if so, not test it. Cc: [email protected] Fixes: 553552ce1796c ("tracing: Combine event filter_active and enable into single flags field") Reported-by: "Yordan Karadzhov (VMware)" <[email protected]> Signed-off-by: Steven Rostedt (VMware) <[email protected]>
2021-02-05init/gcov: allow CONFIG_CONSTRUCTORS on UML to fix module gcovJohannes Berg1-1/+1
On ARCH=um, loading a module doesn't result in its constructors getting called, which breaks module gcov since the debugfs files are never registered. On the other hand, in-kernel constructors have already been called by the dynamic linker, so we can't call them again. Get out of this conundrum by allowing CONFIG_CONSTRUCTORS to be selected, but avoiding the in-kernel constructor calls. Also remove the "if !UML" from GCOV selecting CONSTRUCTORS now, since we really do want CONSTRUCTORS, just not kernel binary ones. Link: https://lkml.kernel.org/r/20210120172041.c246a2cac2fb.I1358f584b76f1898373adfed77f4462c8705b736@changeid Signed-off-by: Johannes Berg <[email protected]> Reviewed-by: Peter Oberparleiter <[email protected]> Cc: Arnd Bergmann <[email protected]> Cc: Jessica Yu <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2021-02-05timens: Delete no-op time_ns_init()Alexey Dobriyan1-6/+0
Signed-off-by: Alexey Dobriyan <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Acked-by: Andrei Vagin <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2021-02-05alarmtimer: Update kerneldocAlexandre Belloni1-1/+7
Update kerneldoc comments to reflect the actual arguments and return values of the documented functions. Signed-off-by: Alexandre Belloni <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2021-02-05ntp: Use freezable workqueue for RTC synchronizationGeert Uytterhoeven1-2/+2
The bug fixed by commit e3fab2f3de081e98 ("ntp: Fix RTC synchronization on 32-bit platforms") revealed an underlying issue: RTC synchronization may happen anytime, even while the system is partially suspended. On systems where the RTC is connected to an I2C bus, the I2C bus controller may already or still be suspended, triggering a WARNING during suspend or resume from s2ram: WARNING: CPU: 0 PID: 124 at drivers/i2c/i2c-core.h:54 __i2c_transfer+0x634/0x680 i2c i2c-6: Transfer while suspended [...] Workqueue: events_power_efficient sync_hw_clock [...] (__i2c_transfer) (i2c_transfer) (regmap_i2c_read) ... (da9063_rtc_set_time) (rtc_set_time) (sync_hw_clock) (process_one_work) Fix this race condition by using the freezable instead of the normal power-efficient workqueue. Signed-off-by: Geert Uytterhoeven <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Acked-by: Rafael J. Wysocki <[email protected]> Link: https://lore.kernel.org/r/[email protected]
Powered by cgit, Gruvboxed by Blaster4385.