| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
PREEMPT_RT does not report "serving softirq" because the tracing core
looks at the preemption counter while PREEMPT_RT does not update it
while processing softirqs in order to remain preemptible. The
information is stored somewhere else.
The in_serving_softirq() macro and the SOFTIRQ_OFFSET define are still
working but not on the preempt-counter.
Use in_serving_softirq() macro which works on PREEMPT_RT. On !PREEMPT_RT
the compiler (gcc-10 / clang-11) is smart enough to optimize the
in_serving_softirq() related read of the preemption counter away.
The only difference I noticed by using in_serving_softirq() on
!PREEMPT_RT is that gcc-10 implemented tracing_gen_ctx_flags() as
reading FLAG, jmp _tracing_gen_ctx_flags(). Without in_serving_softirq()
it inlined _tracing_gen_ctx_flags() into tracing_gen_ctx_flags().
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Sebastian Andrzej Siewior <[email protected]>
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
|
|
Inline tracing_gen_ctx_flags(). This allows to have one ifdef
CONFIG_TRACE_IRQFLAGS_SUPPORT.
This requires to move `trace_flag_type' so tracing_gen_ctx_flags() can
use it.
Link: https://lkml.kernel.org/r/[email protected]
Suggested-by: Steven Rostedt <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Sebastian Andrzej Siewior <[email protected]>
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
|
|
The state of the interrupts (irqflags) and the preemption counter are
both passed down to tracing_generic_entry_update(). Only one bit of
irqflags is actually required: The on/off state. The complete 32bit
of the preemption counter isn't needed. Just whether of the upper bits
(softirq, hardirq and NMI) are set and the preemption depth is needed.
The irqflags and the preemption counter could be evaluated early and the
information stored in an integer `trace_ctx'.
tracing_generic_entry_update() would use the upper bits as the
TRACE_FLAG_* and the lower 8bit as the disabled-preemption depth
(considering that one must be substracted from the counter in one
special cases).
The actual preemption value is not used except for the tracing record.
The `irqflags' variable is mostly used only for the tracing record. An
exception here is for instance wakeup_tracer_call() or
probe_wakeup_sched_switch() which explicilty disable interrupts and use
that `irqflags' to save (and restore) the IRQ state and to record the
state.
Struct trace_event_buffer has also the `pc' and flags' members which can
be replaced with `trace_ctx' since their actual value is not used
outside of trace recording.
This will reduce tracing_generic_entry_update() to simply assign values
to struct trace_entry. The evaluation of the TRACE_FLAG_* bits is moved
to _tracing_gen_ctx_flags() which replaces preempt_count() and
local_save_flags() invocations.
As an example, ftrace_syscall_enter() may invoke:
- trace_buffer_lock_reserve() -> … -> tracing_generic_entry_update()
- event_trigger_unlock_commit()
-> ftrace_trace_stack() -> … -> tracing_generic_entry_update()
-> ftrace_trace_userstack() -> … -> tracing_generic_entry_update()
In this case the TRACE_FLAG_* bits were evaluated three times. By using
the `trace_ctx' they are evaluated once and assigned three times.
A build with all tracers enabled on x86-64 with and without the patch:
text data bss dec hex filename
21970669 17084168 7639260 46694097 2c87ed1 vmlinux.old
21970293 17084168 7639260 46693721 2c87d59 vmlinux.new
text shrank by 379 bytes, data remained constant.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Sebastian Andrzej Siewior <[email protected]>
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
|
|
Remove the cpumask check, as we has done it at the beginning of
the function.
Also fix a typo. s/also the on the/also on the/
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Qiujun Huang <[email protected]>
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
|
|
The cpu_buffer argument is not used inside the rb_inc_page() after
commit 3adc54fa82a6 ("ring-buffer: make the buffer a true circular link
list").
And cpu_buffer argument is not used inside the two functions too,
rb_is_head_page/rb_set_list_to_head.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Qiujun Huang <[email protected]>
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
|
|
Since commit b6f11df26fdc ("trace: Call tracing_reset_online_cpus before
tracer->init()"), get/put_cpu() are not needed anymore.
We can use raw_smp_processor_id() instead.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Qiujun Huang <[email protected]>
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
|
|
Update kernel-doc parameter after
commit b3b1e6ededa4 ("ftrace: Create set_ftrace_notrace_pid to not trace tasks")
added @filtered_no_pids.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Qiujun Huang <[email protected]>
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
|
|
Fix kprobe_on_func_entry() returns error code instead of false so that
register_kretprobe() can return an appropriate error code.
append_trace_kprobe() expects the kprobe registration returns -ENOENT
when the target symbol is not found, and it checks whether the target
module is unloaded or not. If the target module doesn't exist, it
defers to probe the target symbol until the module is loaded.
However, since register_kretprobe() returns -EINVAL instead of -ENOENT
in that case, it always fail on putting the kretprobe event on unloaded
modules. e.g.
Kprobe event:
/sys/kernel/debug/tracing # echo p xfs:xfs_end_io >> kprobe_events
[ 16.515574] trace_kprobe: This probe might be able to register after target module is loaded. Continue.
Kretprobe event: (p -> r)
/sys/kernel/debug/tracing # echo r xfs:xfs_end_io >> kprobe_events
sh: write error: Invalid argument
/sys/kernel/debug/tracing # cat error_log
[ 41.122514] trace_kprobe: error: Failed to register probe event
Command: r xfs:xfs_end_io
^
To fix this bug, change kprobe_on_func_entry() to detect symbol lookup
failure and return -ENOENT in that case. Otherwise it returns -EINVAL
or 0 (succeeded, given address is on the entry).
Link: https://lkml.kernel.org/r/161176187132.1067016.8118042342894378981.stgit@devnote2
Cc: [email protected]
Fixes: 59158ec4aef7 ("tracing/kprobes: Check the probe on unloaded module correctly")
Reported-by: Jianlin Lv <[email protected]>
Signed-off-by: Masami Hiramatsu <[email protected]>
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
|
|
Eaerlier, tracing was disabled when reading the trace file. This behavior
was changed with:
commit 06e0a548bad0 ("tracing: Do not disable tracing when reading the
trace file").
This doesn't seem to work with the latency tracers.
The above mentioned commit dit not only change the behavior but also added
an option to emulate the old behavior. The idea with this patch is to
enable this pause-on-trace option when the latency tracers are used.
Link: https://lkml.kernel.org/r/[email protected]
Cc: [email protected]
Fixes: 06e0a548bad0 ("tracing: Do not disable tracing when reading the trace file")
Signed-off-by: Viktor Rosendahl <[email protected]>
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
|
|
On some archs, the idle task can call into cpu_suspend(). The cpu_suspend()
will disable or pause function graph tracing, as there's some paths in
bringing down the CPU that can have issues with its return address being
modified. The task_struct structure has a "tracing_graph_pause" atomic
counter, that when set to something other than zero, the function graph
tracer will not modify the return address.
The problem is that the tracing_graph_pause counter is initialized when the
function graph tracer is enabled. This can corrupt the counter for the idle
task if it is suspended in these architectures.
CPU 1 CPU 2
----- -----
do_idle()
cpu_suspend()
pause_graph_tracing()
task_struct->tracing_graph_pause++ (0 -> 1)
start_graph_tracing()
for_each_online_cpu(cpu) {
ftrace_graph_init_idle_task(cpu)
task-struct->tracing_graph_pause = 0 (1 -> 0)
unpause_graph_tracing()
task_struct->tracing_graph_pause-- (0 -> -1)
The above should have gone from 1 to zero, and enabled function graph
tracing again. But instead, it is set to -1, which keeps it disabled.
There's no reason that the field tracing_graph_pause on the task_struct can
not be initialized at boot up.
Cc: [email protected]
Fixes: 380c4b1411ccd ("tracing/function-graph-tracer: append the tracing_graph_flag")
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=211339
Reported-by: [email protected]
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
|
|
Replace the gendisk pointer in struct bio with a pointer to the newly
improved struct block device. From that the gendisk can be trivially
accessed with an extra indirection, but it also allows to directly
look up all information related to partition remapping.
Signed-off-by: Christoph Hellwig <[email protected]>
Acked-by: Tejun Heo <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
Enable the notrace function check on the architecture which doesn't
support kprobes on ftrace but support dynamic ftrace. This notrace
function check is not only for the kprobes on ftrace but also
sw-breakpoint based kprobes.
Thus there is no reason to limit this check for the arch which
supports kprobes on ftrace.
This also changes the dependency of Kconfig. Because kprobe event
uses the function tracer's address list for identifying notrace
function, if the CONFIG_DYNAMIC_FTRACE=n, it can not check whether
the target function is notrace or not.
Link: https://lkml.kernel.org/r/[email protected]
Link: https://lkml.kernel.org/r/161007957862.114704.4512260007555399463.stgit@devnote2
Cc: [email protected]
Fixes: 45408c4f92506 ("tracing: kprobes: Prohibit probing on notrace function")
Acked-by: Naveen N. Rao <[email protected]>
Signed-off-by: Masami Hiramatsu <[email protected]>
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
|
|
Move function tracer options to Kconfig to make it easier to add
new methods for generating __mcount_loc, and to make the options
available also when building kernel modules.
Note that FTRACE_MCOUNT_USE_* options are updated on rebuild and
therefore, work even if the .config was generated in a different
environment.
Signed-off-by: Sami Tolvanen <[email protected]>
Acked-by: Steven Rostedt (VMware) <[email protected]>
Signed-off-by: Kees Cook <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
"The major update to this release is that there's a new arch config
option called CONFIG_HAVE_DYNAMIC_FTRACE_WITH_ARGS.
Currently, only x86_64 enables it. All the ftrace callbacks now take a
struct ftrace_regs instead of a struct pt_regs. If the architecture
has HAVE_DYNAMIC_FTRACE_WITH_ARGS enabled, then the ftrace_regs will
have enough information to read the arguments of the function being
traced, as well as access to the stack pointer.
This way, if a user (like live kernel patching) only cares about the
arguments, then it can avoid using the heavier weight "regs" callback,
that puts in enough information in the struct ftrace_regs to simulate
a breakpoint exception (needed for kprobes).
A new config option that audits the timestamps of the ftrace ring
buffer at most every event recorded.
Ftrace recursion protection has been cleaned up to move the protection
to the callback itself (this saves on an extra function call for those
callbacks).
Perf now handles its own RCU protection and does not depend on ftrace
to do it for it (saving on that extra function call).
New debug option to add "recursed_functions" file to tracefs that
lists all the places that triggered the recursion protection of the
function tracer. This will show where things need to be fixed as
recursion slows down the function tracer.
The eval enum mapping updates done at boot up are now offloaded to a
work queue, as it caused a noticeable pause on slow embedded boards.
Various clean ups and last minute fixes"
* tag 'trace-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (33 commits)
tracing: Offload eval map updates to a work queue
Revert: "ring-buffer: Remove HAVE_64BIT_ALIGNED_ACCESS"
ring-buffer: Add rb_check_bpage in __rb_allocate_pages
ring-buffer: Fix two typos in comments
tracing: Drop unneeded assignment in ring_buffer_resize()
tracing: Disable ftrace selftests when any tracer is running
seq_buf: Avoid type mismatch for seq_buf_init
ring-buffer: Fix a typo in function description
ring-buffer: Remove obsolete rb_event_is_commit()
ring-buffer: Add test to validate the time stamp deltas
ftrace/documentation: Fix RST C code blocks
tracing: Clean up after filter logic rewriting
tracing: Remove the useless value assignment in test_create_synth_event()
livepatch: Use the default ftrace_ops instead of REGS when ARGS is available
ftrace/x86: Allow for arguments to be passed in to ftrace_regs by default
ftrace: Have the callbacks receive a struct ftrace_regs instead of pt_regs
MAINTAINERS: assign ./fs/tracefs to TRACING
tracing: Fix some typos in comments
ftrace: Remove unused varible 'ret'
ring-buffer: Add recording of ring buffer recursion into recursed_functions
...
|
|
Pull block updates from Jens Axboe:
"Another series of killing more code than what is being added, again
thanks to Christoph's relentless cleanups and tech debt tackling.
This contains:
- blk-iocost improvements (Baolin Wang)
- part0 iostat fix (Jeffle Xu)
- Disable iopoll for split bios (Jeffle Xu)
- block tracepoint cleanups (Christoph Hellwig)
- Merging of struct block_device and hd_struct (Christoph Hellwig)
- Rework/cleanup of how block device sizes are updated (Christoph
Hellwig)
- Simplification of gendisk lookup and removal of block device
aliasing (Christoph Hellwig)
- Block device ioctl cleanups (Christoph Hellwig)
- Removal of bdget()/blkdev_get() as exported API (Christoph Hellwig)
- Disk change rework, avoid ->revalidate_disk() (Christoph Hellwig)
- sbitmap improvements (Pavel Begunkov)
- Hybrid polling fix (Pavel Begunkov)
- bvec iteration improvements (Pavel Begunkov)
- Zone revalidation fixes (Damien Le Moal)
- blk-throttle limit fix (Yu Kuai)
- Various little fixes"
* tag 'for-5.11/block-2020-12-14' of git://git.kernel.dk/linux-block: (126 commits)
blk-mq: fix msec comment from micro to milli seconds
blk-mq: update arg in comment of blk_mq_map_queue
blk-mq: add helper allocating tagset->tags
Revert "block: Fix a lockdep complaint triggered by request queue flushing"
nvme-loop: use blk_mq_hctx_set_fq_lock_class to set loop's lock class
blk-mq: add new API of blk_mq_hctx_set_fq_lock_class
block: disable iopoll for split bio
block: Improve blk_revalidate_disk_zones() checks
sbitmap: simplify wrap check
sbitmap: replace CAS with atomic and
sbitmap: remove swap_lock
sbitmap: optimise sbitmap_deferred_clear()
blk-mq: skip hybrid polling if iopoll doesn't spin
blk-iocost: Factor out the base vrate change into a separate function
blk-iocost: Factor out the active iocgs' state check into a separate function
blk-iocost: Move the usage ratio calculation to the correct place
blk-iocost: Remove unnecessary advance declaration
blk-iocost: Fix some typos in comments
blktrace: fix up a kerneldoc comment
block: remove the request_queue to argument request based tracepoints
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic cross-architecture timer cleanup from Arnd Bergmann:
"This cleans up two ancient timer features that were never completed in
the past, CONFIG_GENERIC_CLOCKEVENTS and CONFIG_ARCH_USES_GETTIMEOFFSET.
There was only one user left for the ARCH_USES_GETTIMEOFFSET variant
of clocksource implementations, the ARM EBSA110 platform. Rather than
changing to use modern timekeeping, we remove the platform entirely as
Russell no longer uses his machine and nobody else seems to have one
any more.
The conditional code for using arch_gettimeoffset() is removed as a
result.
For CONFIG_GENERIC_CLOCKEVENTS, there are still a couple of platforms
not using clockevent drivers: parisc, ia64, most of m68k, and one Arm
platform. These all do timer ticks slighly differently, and this gets
cleaned up to the point they at least all call the same helper
function.
Instead of most platforms using 'select GENERIC_CLOCKEVENTS' in
Kconfig, the polarity is now reversed, with the few remaining ones
selecting LEGACY_TIMER_TICK instead"
* tag 'asm-generic-timers-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
timekeeping: default GENERIC_CLOCKEVENTS to enabled
timekeeping: remove xtime_update
m68k: remove timer_interrupt() function
m68k: change remaining timers to legacy_timer_tick
m68k: m68328: use legacy_timer_tick()
m68k: sun3/sun3c: use legacy_timer_tick
m68k: split heartbeat out of timer function
m68k: coldfire: use legacy_timer_tick()
parisc: use legacy_timer_tick
ARM: rpc: use legacy_timer_tick
ia64: convert to legacy_timer_tick
timekeeping: add CONFIG_LEGACY_TIMER_TICK
timekeeping: remove arch_gettimeoffset
net: remove am79c961a driver
ARM: remove ebsa110 platform
|
|
Now that relay_open() accepts const callbacks, make relay callbacks
const.
Link: https://lkml.kernel.org/r/7ff5ce0b735901eb4f10e13da2704f1d8c4a2507.1606153547.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Cc: Jens Axboe <[email protected]>
Cc: Kalle Valo <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core:
- support "prefer busy polling" NAPI operation mode, where we defer
softirq for some time expecting applications to periodically busy
poll
- AF_XDP: improve efficiency by more batching and hindering the
adjacency cache prefetcher
- af_packet: make packet_fanout.arr size configurable up to 64K
- tcp: optimize TCP zero copy receive in presence of partial or
unaligned reads making zero copy a performance win for much smaller
messages
- XDP: add bulk APIs for returning / freeing frames
- sched: support fragmenting IP packets as they come out of conntrack
- net: allow virtual netdevs to forward UDP L4 and fraglist GSO skbs
BPF:
- BPF switch from crude rlimit-based to memcg-based memory accounting
- BPF type format information for kernel modules and related tracing
enhancements
- BPF implement task local storage for BPF LSM
- allow the FENTRY/FEXIT/RAW_TP tracing programs to use
bpf_sk_storage
Protocols:
- mptcp: improve multiple xmit streams support, memory accounting and
many smaller improvements
- TLS: support CHACHA20-POLY1305 cipher
- seg6: add support for SRv6 End.DT4/DT6 behavior
- sctp: Implement RFC 6951: UDP Encapsulation of SCTP
- ppp_generic: add ability to bridge channels directly
- bridge: Connectivity Fault Management (CFM) support as is defined
in IEEE 802.1Q section 12.14.
Drivers:
- mlx5: make use of the new auxiliary bus to organize the driver
internals
- mlx5: more accurate port TX timestamping support
- mlxsw:
- improve the efficiency of offloaded next hop updates by using
the new nexthop object API
- support blackhole nexthops
- support IEEE 802.1ad (Q-in-Q) bridging
- rtw88: major bluetooth co-existance improvements
- iwlwifi: support new 6 GHz frequency band
- ath11k: Fast Initial Link Setup (FILS)
- mt7915: dual band concurrent (DBDC) support
- net: ipa: add basic support for IPA v4.5
Refactor:
- a few pieces of in_interrupt() cleanup work from Sebastian Andrzej
Siewior
- phy: add support for shared interrupts; get rid of multiple driver
APIs and have the drivers write a full IRQ handler, slight growth
of driver code should be compensated by the simpler API which also
allows shared IRQs
- add common code for handling netdev per-cpu counters
- move TX packet re-allocation from Ethernet switch tag drivers to a
central place
- improve efficiency and rename nla_strlcpy
- number of W=1 warning cleanups as we now catch those in a patchwork
build bot
Old code removal:
- wan: delete the DLCI / SDLA drivers
- wimax: move to staging
- wifi: remove old WDS wifi bridging support"
* tag 'net-next-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1922 commits)
net: hns3: fix expression that is currently always true
net: fix proc_fs init handling in af_packet and tls
nfc: pn533: convert comma to semicolon
af_vsock: Assign the vsock transport considering the vsock address flags
af_vsock: Set VMADDR_FLAG_TO_HOST flag on the receive path
vsock_addr: Check for supported flag values
vm_sockets: Add VMADDR_FLAG_TO_HOST vsock flag
vm_sockets: Add flags field in the vsock address data structure
net: Disable NETIF_F_HW_TLS_TX when HW_CSUM is disabled
tcp: Add logic to check for SYN w/ data in tcp_simple_retransmit
net: mscc: ocelot: install MAC addresses in .ndo_set_rx_mode from process context
nfc: s3fwrn5: Release the nfc firmware
net: vxget: clean up sparse warnings
mlxsw: spectrum_router: Use eXtended mezzanine to offload IPv4 router
mlxsw: spectrum: Set KVH XLT cache mode for Spectrum2/3
mlxsw: spectrum_router_xm: Introduce basic XM cache flushing
mlxsw: reg: Add Router LPM Cache Enable Register
mlxsw: reg: Add Router LPM Cache ML Delete Register
mlxsw: spectrum_router_xm: Implement L-value tracking for M-index
mlxsw: reg: Add XM Router M Table Register
...
|
|
In order for tracepoints to export their enums to user space, the use of the
TRACE_DEFINE_ENUM() macro is used. On boot up, the strings shown in the
tracefs "print fmt" lines are processed, and all the enums registered by
TRACE_DEFINE_ENUM are replaced with the interger value. This way, userspace
tools that read the raw binary data, knows how to evaluate the raw events.
This is currently done in an initcall, but it has been noticed that slow
embedded boards that have tracing may take a few seconds to process them
all, and a few seconds slow down on an embedded device is detrimental to the
system.
Instead, offload the work to a work queue and make sure that its finished by
destroying the work queue (which flushes all work) in a late initcall. This
will allow the system to continue to boot and run the updates in the
background, and this speeds up the boot time. Note, the strings being
updated are only used by user space, so finishing the process before the
system is fully booted will prevent any race issues.
Link: https://lore.kernel.org/r/[email protected]
Reported-by: Lucas Stach <[email protected]>
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Thomas Gleixner:
- migrate_disable/enable() support which originates from the RT tree
and is now a prerequisite for the new preemptible kmap_local() API
which aims to replace kmap_atomic().
- A fair amount of topology and NUMA related improvements
- Improvements for the frequency invariant calculations
- Enhanced robustness for the global CPU priority tracking and decision
making
- The usual small fixes and enhancements all over the place
* tag 'sched-core-2020-12-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (61 commits)
sched/fair: Trivial correction of the newidle_balance() comment
sched/fair: Clear SMT siblings after determining the core is not idle
sched: Fix kernel-doc markup
x86: Print ratio freq_max/freq_base used in frequency invariance calculations
x86, sched: Use midpoint of max_boost and max_P for frequency invariance on AMD EPYC
x86, sched: Calculate frequency invariance for AMD systems
irq_work: Optimize irq_work_single()
smp: Cleanup smp_call_function*()
irq_work: Cleanup
sched: Limit the amount of NUMA imbalance that can exist at fork time
sched/numa: Allow a floating imbalance between NUMA nodes
sched: Avoid unnecessary calculation of load imbalance at clone time
sched/numa: Rename nr_running and break out the magic number
sched: Make migrate_disable/enable() independent of RT
sched/topology: Condition EAS enablement on FIE support
arm64: Rebuild sched domains on invariance status changes
sched/topology,schedutil: Wrap sched domains rebuild
sched/uclamp: Allow to reset a task uclamp constraint value
sched/core: Fix typos in comments
Documentation: scheduler: fix information on arch SD flags, sched_domain and sched_debug
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf/kprobes updates from Thomas Gleixner:
"Make kretprobes lockless to avoid the rp->lock performance and
potential lock ordering issues"
* tag 'perf-kprobes-2020-12-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/atomics: Regenerate the atomics-check SHA1's
kprobes: Replace rp->free_instance with freelist
freelist: Implement lockless freelist
asm-generic/atomic: Add try_cmpxchg() fallbacks
kprobes: Remove kretprobe hash
llist: Add nonatomic __llist_add() and __llist_dell_all()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull core entry/exit updates from Thomas Gleixner:
"A set of updates for entry/exit handling:
- More generalization of entry/exit functionality
- The consolidation work to reclaim TIF flags on x86 and also for
non-x86 specific TIF flags which are solely relevant for syscall
related work and have been moved into their own storage space. The
x86 specific part had to be merged in to avoid a major conflict.
- The TIF_NOTIFY_SIGNAL work which replaces the inefficient signal
delivery mode of task work and results in an impressive performance
improvement for io_uring. The non-x86 consolidation of this is
going to come seperate via Jens.
- The selective syscall redirection facility which provides a clean
and efficient way to support the non-Linux syscalls of WINE by
catching them at syscall entry and redirecting them to the user
space emulation. This can be utilized for other purposes as well
and has been designed carefully to avoid overhead for the regular
fastpath. This includes the core changes and the x86 support code.
- Simplification of the context tracking entry/exit handling for the
users of the generic entry code which guarantee the proper ordering
and protection.
- Preparatory changes to make the generic entry code accomodate S390
specific requirements which are mostly related to their syscall
restart mechanism"
* tag 'core-entry-2020-12-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (36 commits)
entry: Add syscall_exit_to_user_mode_work()
entry: Add exit_to_user_mode() wrapper
entry_Add_enter_from_user_mode_wrapper
entry: Rename exit_to_user_mode()
entry: Rename enter_from_user_mode()
docs: Document Syscall User Dispatch
selftests: Add benchmark for syscall user dispatch
selftests: Add kselftest for syscall user dispatch
entry: Support Syscall User Dispatch on common syscall entry
kernel: Implement selective syscall userspace redirection
signal: Expose SYS_USER_DISPATCH si_code type
x86: vdso: Expose sigreturn address on vdso to the kernel
MAINTAINERS: Add entry for common entry code
entry: Fix boot for !CONFIG_GENERIC_ENTRY
x86: Support HAVE_CONTEXT_TRACKING_OFFSTACK
context_tracking: Only define schedule_user() on !HAVE_CONTEXT_TRACKING_OFFSTACK archs
sched: Detect call to schedule from critical entry code
context_tracking: Don't implement exception_enter/exit() on CONFIG_HAVE_CONTEXT_TRACKING_OFFSTACK
context_tracking: Introduce HAVE_CONTEXT_TRACKING_OFFSTACK
x86: Reclaim unused x86 TI flags
...
|
|
Daniel Borkmann says:
====================
pull-request: bpf-next 2020-12-14
1) Expose bpf_sk_storage_*() helpers to iterator programs, from Florent Revest.
2) Add AF_XDP selftests based on veth devs to BPF selftests, from Weqaar Janjua.
3) Support for finding BTF based kernel attach targets through libbpf's
bpf_program__set_attach_target() API, from Andrii Nakryiko.
4) Permit pointers on stack for helper calls in the verifier, from Yonghong Song.
5) Fix overflows in hash map elem size after rlimit removal, from Eric Dumazet.
6) Get rid of direct invocation of llc in BPF selftests, from Andrew Delgadillo.
7) Fix xsk_recvmsg() to reorder socket state check before access, from Björn Töpel.
8) Add new libbpf API helper to retrieve ring buffer epoll fd, from Brendan Jackman.
9) Batch of minor BPF selftest improvements all over the place, from Florian Lehner,
KP Singh, Jiri Olsa and various others.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (31 commits)
selftests/bpf: Add a test for ptr_to_map_value on stack for helper access
bpf: Permits pointers on stack for helper calls
libbpf: Expose libbpf ring_buffer epoll_fd
selftests/bpf: Add set_attach_target() API selftest for module target
libbpf: Support modules in bpf_program__set_attach_target() API
selftests/bpf: Silence ima_setup.sh when not running in verbose mode.
selftests/bpf: Drop the need for LLVM's llc
selftests/bpf: fix bpf_testmod.ko recompilation logic
samples/bpf: Fix possible hang in xdpsock with multiple threads
selftests/bpf: Make selftest compilation work on clang 11
selftests/bpf: Xsk selftests - adding xdpxceiver to .gitignore
selftests/bpf: Drop tcp-{client,server}.py from Makefile
selftests/bpf: Xsk selftests - Bi-directional Sockets - SKB, DRV
selftests/bpf: Xsk selftests - Socket Teardown - SKB, DRV
selftests/bpf: Xsk selftests - DRV POLL, NOPOLL
selftests/bpf: Xsk selftests - SKB POLL, NOPOLL
selftests/bpf: Xsk selftests framework
bpf: Only provide bpf_sock_from_file with CONFIG_NET
bpf: Return -ENOTSUPP when attaching to non-kernel BTF
xsk: Validate socket state in xsk_recvmsg, prior touching socket members
...
====================
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
It was believed that metag was the only architecture that required the ring
buffer to keep 8 byte words aligned on 8 byte architectures, and with its
removal, it was assumed that the ring buffer code did not need to handle
this case. It appears that sparc64 also requires this.
The following was reported on a sparc64 boot up:
kernel: futex hash table entries: 65536 (order: 9, 4194304 bytes, linear)
kernel: Running postponed tracer tests:
kernel: Testing tracer function:
kernel: Kernel unaligned access at TPC[552a20] trace_function+0x40/0x140
kernel: Kernel unaligned access at TPC[552a24] trace_function+0x44/0x140
kernel: Kernel unaligned access at TPC[552a20] trace_function+0x40/0x140
kernel: Kernel unaligned access at TPC[552a24] trace_function+0x44/0x140
kernel: Kernel unaligned access at TPC[552a20] trace_function+0x40/0x140
kernel: PASSED
Need to put back the 64BIT aligned code for the ring buffer.
Link: https://lore.kernel.org/r/CADxRZqzXQRYgKc=y-KV=S_yHL+Y8Ay2mh5ezeZUnpRvg+syWKw@mail.gmail.com
Cc: [email protected]
Fixes: 86b3de60a0b6 ("ring-buffer: Remove HAVE_64BIT_ALIGNED_ACCESS")
Reported-by: Anatoly Pugachev <[email protected]>
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
|
|
It may be better to check each page is aligned by 4 bytes. The 2
least significant bits of the address will be used as flags.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Qiujun Huang <[email protected]>
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
|
|
s/inerrupting/interrupting/
s/beween/between/
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Qiujun Huang <[email protected]>
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
|
|
Since commit 0a1754b2a97e ("ring-buffer: Return 0 on success from
ring_buffer_resize()"), computing the size is not needed anymore.
Drop unneeded assignment in ring_buffer_resize().
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Lukas Bulwahn <[email protected]>
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
|
|
Disable ftrace selftests when any tracer (kernel command line options
like ftrace=, trace_events=, kprobe_events=, and boot-time tracing)
starts running because selftest can disturb it.
Currently ftrace= and trace_events= are checked, but kprobe_events
has a different flag, and boot-time tracing didn't checked. This unifies
the disabled flag and all of those boot-time tracing features sets
the flag.
This also fixes warnings on kprobe-event selftest
(CONFIG_FTRACE_STARTUP_TEST=y and CONFIG_KPROBE_EVENTS=y) with boot-time
tracing (ftrace.event.kprobes.EVENT.probes) like below;
[ 59.803496] trace_kprobe: Testing kprobe tracing:
[ 59.804258] ------------[ cut here ]------------
[ 59.805682] WARNING: CPU: 3 PID: 1 at kernel/trace/trace_kprobe.c:1987 kprobe_trace_self_tests_ib
[ 59.806944] Modules linked in:
[ 59.807335] CPU: 3 PID: 1 Comm: swapper/0 Not tainted 5.10.0-rc7+ #172
[ 59.808029] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1 04/01/204
[ 59.808999] RIP: 0010:kprobe_trace_self_tests_init+0x5f/0x42b
[ 59.809696] Code: e8 03 00 00 48 c7 c7 30 8e 07 82 e8 6d 3c 46 ff 48 c7 c6 00 b2 1a 81 48 c7 c7 7
[ 59.812439] RSP: 0018:ffffc90000013e78 EFLAGS: 00010282
[ 59.813038] RAX: 00000000ffffffef RBX: 0000000000000000 RCX: 0000000000049443
[ 59.813780] RDX: 0000000000049403 RSI: 0000000000049403 RDI: 000000000002deb0
[ 59.814589] RBP: ffffc90000013e90 R08: 0000000000000001 R09: 0000000000000001
[ 59.815349] R10: 0000000000000001 R11: 0000000000000000 R12: 00000000ffffffef
[ 59.816138] R13: ffff888004613d80 R14: ffffffff82696940 R15: ffff888004429138
[ 59.816877] FS: 0000000000000000(0000) GS:ffff88807dcc0000(0000) knlGS:0000000000000000
[ 59.817772] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 59.818395] CR2: 0000000001a8dd38 CR3: 0000000002222000 CR4: 00000000000006a0
[ 59.819144] Call Trace:
[ 59.819469] ? init_kprobe_trace+0x6b/0x6b
[ 59.819948] do_one_initcall+0x5f/0x300
[ 59.820392] ? rcu_read_lock_sched_held+0x4f/0x80
[ 59.820916] kernel_init_freeable+0x22a/0x271
[ 59.821416] ? rest_init+0x241/0x241
[ 59.821841] kernel_init+0xe/0x10f
[ 59.822251] ret_from_fork+0x22/0x30
[ 59.822683] irq event stamp: 16403349
[ 59.823121] hardirqs last enabled at (16403359): [<ffffffff810db81e>] console_unlock+0x48e/0x580
[ 59.824074] hardirqs last disabled at (16403368): [<ffffffff810db786>] console_unlock+0x3f6/0x580
[ 59.825036] softirqs last enabled at (16403200): [<ffffffff81c0033a>] __do_softirq+0x33a/0x484
[ 59.825982] softirqs last disabled at (16403087): [<ffffffff81a00f02>] asm_call_irq_on_stack+0x10
[ 59.827034] ---[ end trace 200c544775cdfeb3 ]---
[ 59.827635] trace_kprobe: error on probing function entry.
Link: https://lkml.kernel.org/r/160741764955.3448999.3347769358299456915.stgit@devnote2
Fixes: 4d655281eb1b ("tracing/boot Add kprobe event support")
Cc: Ingo Molnar <[email protected]>
Cc: [email protected]
Signed-off-by: Masami Hiramatsu <[email protected]>
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
|
|
xdp_return_frame_bulk() needs to pass a xdp_buff
to __xdp_return().
strlcpy got converted to strscpy but here it makes no
functional difference, so just keep the right code.
Conflicts:
net/netfilter/nf_tables_api.c
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Remove bpf_ prefix, which causes these helpers to be reported in verifier
dump as bpf_bpf_this_cpu_ptr() and bpf_bpf_per_cpu_ptr(), respectively. Lets
fix it as long as it is still possible before UAPI freezes on these helpers.
Fixes: eaa6bcb71ef6 ("bpf: Introduce bpf_per_cpu_ptr()")
Signed-off-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
This moves the bpf_sock_from_file definition into net/core/filter.c
which only gets compiled with CONFIG_NET and also moves the helper proto
usage next to other tracing helpers that are conditional on CONFIG_NET.
This avoids
ld: kernel/trace/bpf_trace.o: in function `bpf_sock_from_file':
bpf_trace.c:(.text+0xe23): undefined reference to `sock_from_file'
When compiling a kernel with BPF and without NET.
Reported-by: kernel test robot <[email protected]>
Reported-by: Randy Dunlap <[email protected]>
Signed-off-by: Florent Revest <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Acked-by: Randy Dunlap <[email protected]>
Acked-by: Martin KaFai Lau <[email protected]>
Acked-by: KP Singh <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
s/ring_buffer_commit_discard/ring_buffer_discard_commit/
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Qiujun Huang <[email protected]>
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
|
|
Commit a389d86f7fd0 ("ring-buffer: Have nested events still record running
time stamp") removed the only uses of rb_event_is_commit() in
rb_update_event() and rb_update_write_stamp().
Hence, since then, make CC=clang W=1 warns:
kernel/trace/ring_buffer.c:2763:1:
warning: unused function 'rb_event_is_commit' [-Wunused-function]
Remove this obsolete function.
Link: https://lkml.kernel.org/r/[email protected]
Reviewed-by: Nathan Chancellor <[email protected]>
Signed-off-by: Lukas Bulwahn <[email protected]>
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
|
|
Fixes: a54895fa057c ("block: remove the request_queue to argument request based tracepoints")
Reported-by: Stephen Rothwell <[email protected]>
Signed-off-by: Christoph Hellwig <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fix from Steven Rostedt:
"Fix userstacktrace option for instances
While writing an application that requires user stack trace option to
work in instances, I found that the instance option has a bug that
makes it a nop. The check for performing the user stack trace in an
instance, checks the top level options (not the instance options) to
determine if a user stack trace should be performed or not.
This is not only incorrect, but also confusing for users. It confused
me for a bit!"
* tag 'trace-v5.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Fix userstacktrace option for instances
|
|
When the instances were able to use their own options, the userstacktrace
option was left hardcoded for the top level. This made the instance
userstacktrace option bascially into a nop, and will confuse users that set
it, but nothing happens (I was confused when it happened to me!)
Cc: [email protected]
Fixes: 16270145ce6b ("tracing: Add trace options for core options to instances")
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
|
|
While eBPF programs can check whether a file is a socket by file->f_op
== &socket_file_ops, they cannot convert the void private_data pointer
to a struct socket BTF pointer. In order to do this a new helper
wrapping sock_from_file is added.
This is useful to tracing programs but also other program types
inheriting this set of helpers such as iterators or LSM programs.
Signed-off-by: Florent Revest <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: KP Singh <[email protected]>
Acked-by: Martin KaFai Lau <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
The request_queue can trivially be derived from the request.
Signed-off-by: Christoph Hellwig <[email protected]>
Reviewed-by: Damien Le Moal <[email protected]>
Reviewed-by: Hannes Reinecke <[email protected]>
Reviewed-by: Chaitanya Kulkarni <[email protected]>
Acked-by: Tejun Heo <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
The request_queue can trivially be derived from the bio.
Signed-off-by: Christoph Hellwig <[email protected]>
Reviewed-by: Damien Le Moal <[email protected]>
Reviewed-by: Hannes Reinecke <[email protected]>
Reviewed-by: Chaitanya Kulkarni <[email protected]>
Acked-by: Tejun Heo <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
The request_queue can trivially be derived from the bio.
Signed-off-by: Christoph Hellwig <[email protected]>
Reviewed-by: Damien Le Moal <[email protected]>
Reviewed-by: Hannes Reinecke <[email protected]>
Reviewed-by: Chaitanya Kulkarni <[email protected]>
Acked-by: Tejun Heo <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
The block_bio_merge tracepoint class can be reused for most bio-based
tracepoints. For that it just needs to lose the superfluous q and rq
parameters.
Signed-off-by: Christoph Hellwig <[email protected]>
Reviewed-by: Damien Le Moal <[email protected]>
Reviewed-by: Hannes Reinecke <[email protected]>
Reviewed-by: Chaitanya Kulkarni <[email protected]>
Acked-by: Tejun Heo <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
The block_sleeprq tracepoint was only used by the legacy request code.
Remove it now that the legacy request code is gone.
Signed-off-by: Christoph Hellwig <[email protected]>
Reviewed-by: Damien Le Moal <[email protected]>
Reviewed-by: Hannes Reinecke <[email protected]>
Reviewed-by: Chaitanya Kulkarni <[email protected]>
Acked-by: Tejun Heo <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
Alexei Starovoitov says:
====================
pull-request: bpf-next 2020-12-03
The main changes are:
1) Support BTF in kernel modules, from Andrii.
2) Introduce preferred busy-polling, from Björn.
3) bpf_ima_inode_hash() and bpf_bprm_opts_set() helpers, from KP Singh.
4) Memcg-based memory accounting for bpf objects, from Roman.
5) Allow bpf_{s,g}etsockopt from cgroup bind{4,6} hooks, from Stanislav.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (118 commits)
selftests/bpf: Fix invalid use of strncat in test_sockmap
libbpf: Use memcpy instead of strncpy to please GCC
selftests/bpf: Add fentry/fexit/fmod_ret selftest for kernel module
selftests/bpf: Add tp_btf CO-RE reloc test for modules
libbpf: Support attachment of BPF tracing programs to kernel modules
libbpf: Factor out low-level BPF program loading helper
bpf: Allow to specify kernel module BTFs when attaching BPF programs
bpf: Remove hard-coded btf_vmlinux assumption from BPF verifier
selftests/bpf: Add CO-RE relocs selftest relying on kernel module BTF
selftests/bpf: Add support for marking sub-tests as skipped
selftests/bpf: Add bpf_testmod kernel module for testing
libbpf: Add kernel module BTF support for CO-RE relocations
libbpf: Refactor CO-RE relocs to not assume a single BTF object
libbpf: Add internal helper to load BTF data by FD
bpf: Keep module's btf_data_size intact after load
bpf: Fix bpf_put_raw_tracepoint()'s use of __module_address()
selftests/bpf: Add Userspace tests for TCP_WINDOW_CLAMP
bpf: Adds support for setting window clamp
samples/bpf: Fix spelling mistake "recieving" -> "receiving"
bpf: Fix cold build of test_progs-no_alu32
...
====================
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
__module_address() needs to be called with preemption disabled or with
module_mutex taken. preempt_disable() is enough for read-only uses, which is
what this fix does. Also, module_put() does internal check for NULL, so drop
it as well.
Fixes: a38d1107f937 ("bpf: support raw tracepoints in modules")
Signed-off-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Acked-by: Martin KaFai Lau <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Conflicts:
drivers/net/ethernet/ibm/ibmvnic.c
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
While debugging a situation where a delta for an event was calucalted wrong,
I realize there was nothing making sure that the delta of events are
correct. If a single event has an incorrect delta, then all events after it
will also have one. If the discrepency gets large enough, it could cause
the time stamps to go backwards when crossing sub buffers, that record a
full 64 bit time stamp, and the new deltas are added to that.
Add a way to validate the events at most events and when crossing a buffer
page. This will help make sure that the deltas are always correct. This test
will detect if they are ever corrupted.
The test adds a high overhead to the ring buffer recording, as it does the
audit for almost every event, and should only be used for testing the ring
buffer.
This will catch the bug that is fixed by commit 55ea4cf40380 ("ring-buffer:
Update write stamp with the correct ts"), which is not applied when this
commit is applied.
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
- Use correct timestamp variable for ring buffer write stamp update
- Fix up before stamp and write stamp when crossing ring buffer sub
buffers
- Keep a zero delta in ring buffer in slow path if cmpxchg fails
- Fix trace_printk static buffer for archs that care
- Fix ftrace record accounting for ftrace ops with trampolines
- Fix DYNAMIC_FTRACE_WITH_DIRECT_CALLS dependency
- Remove WARN_ON in hwlat tracer that triggers on something that is OK
- Make "my_tramp" trampoline in ftrace direct sample code global
- Fixes in the bootconfig tool for better alignment management
* tag 'trace-v5.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
ring-buffer: Always check to put back before stamp when crossing pages
ftrace: Fix DYNAMIC_FTRACE_WITH_DIRECT_CALLS dependency
ftrace: Fix updating FTRACE_FL_TRAMP
tracing: Fix alignment of static buffer
tracing: Remove WARN_ON in start_thread()
samples/ftrace: Mark my_tramp[12]? global
ring-buffer: Set the right timestamp in the slow path of __rb_reserve_next()
ring-buffer: Update write stamp with the correct ts
docs: bootconfig: Update file format on initrd image
tools/bootconfig: Align the bootconfig applied initrd image size to 4
tools/bootconfig: Fix to check the write failure correctly
tools/bootconfig: Fix errno reference after printf()
|
|
Instead of having two structures that represent each block device with
different life time rules, merge them into a single one. This also
greatly simplifies the reference counting rules, as we can use the inode
reference count as the main reference count for the new struct
block_device, with the device model reference front ending it for device
model interaction.
Signed-off-by: Christoph Hellwig <[email protected]>
Reviewed-by: Jan Kara <[email protected]>
Reviewed-by: Hannes Reinecke <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
Move the start_sect field to struct block_device in preparation
of killing struct hd_struct.
Signed-off-by: Christoph Hellwig <[email protected]>
Reviewed-by: Jan Kara <[email protected]>
Reviewed-by: Hannes Reinecke <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
Now that the hd_struct always has a block device attached to it, there is
no need for having two size field that just get out of sync.
Additionally the field in hd_struct did not use proper serialization,
possibly allowing for torn writes. By only using the block_device field
this problem also gets fixed.
Signed-off-by: Christoph Hellwig <[email protected]>
Reviewed-by: Greg Kroah-Hartman <[email protected]>
Reviewed-by: Jan Kara <[email protected]>
Reviewed-by: Hannes Reinecke <[email protected]>
Acked-by: Coly Li <[email protected]> [bcache]
Acked-by: Chao Yu <[email protected]> [f2fs]
Signed-off-by: Jens Axboe <[email protected]>
|