aboutsummaryrefslogtreecommitdiff
path: root/kernel/debug
AgeCommit message (Collapse)AuthorFilesLines
2019-09-25kgdb: don't use a notifier to enter kgdb at panic; call directlyDouglas Anderson1-20/+11
Right now kgdb/kdb hooks up to debug panics by registering for the panic notifier. This works OK except that it means that kgdb/kdb gets called _after_ the CPUs in the system are taken offline. That means that if anything important was happening on those CPUs (like something that might have contributed to the panic) you can't debug them. Specifically I ran into a case where I got a panic because a task was "blocked for more than 120 seconds" which was detected on CPU 2. I nicely got shown stack traces in the kernel log for all CPUs including CPU 0, which was running 'PID: 111 Comm: kworker/0:1H' and was in the middle of __mmc_switch(). I then ended up at the kdb prompt where switched over to kgdb to try to look at local variables of the process on CPU 0. I found that I couldn't. Digging more, I found that I had no info on any tasks running on CPUs other than CPU 2 and that asking kdb for help showed me "Error: no saved data for this cpu". This was because all the CPUs were offline. Let's move the entry of kdb/kgdb to a direct call from panic() and stop using the generic notifier. Putting a direct call in allows us to order things more properly and it also doesn't seem like we're breaking any abstractions by calling into the debugger from the panic function. Daniel said: : This patch changes the way kdump and kgdb interact with each other. : However it would seem rather odd to have both tools simultaneously armed : and, even if they were, the user still has the option to use panic_timeout : to force a kdump to happen. Thus I think the change of order is : acceptable. Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Douglas Anderson <[email protected]> Reviewed-by: Daniel Thompson <[email protected]> Cc: Jason Wessel <[email protected]> Cc: Kees Cook <[email protected]> Cc: Borislav Petkov <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: Feng Tang <[email protected]> Cc: YueHaibing <[email protected]> Cc: Sergey Senozhatsky <[email protected]> Cc: "Steven Rostedt (VMware)" <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2019-09-03kgdb: fix comment regarding static functionNadav Amit1-4/+1
The comment that says that module_event() is not static is clearly wrong. Signed-off-by: Nadav Amit <[email protected]> Signed-off-by: Daniel Thompson <[email protected]>
2019-09-03kdb: Replace strncmp with str_has_prefixChuhong Yuan1-1/+1
strncmp(str, const, len) is error-prone. We had better use newly introduced str_has_prefix() instead of it. Signed-off-by: Chuhong Yuan <[email protected]> Signed-off-by: Daniel Thompson <[email protected]>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner1-0/+1
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2019-05-14kdb: Fix bound check compiler warningWenlin Kang1-1/+1
The strncpy() function may leave the destination string buffer unterminated, better use strscpy() instead. This fixes the following warning with gcc 8.2: kernel/debug/kdb/kdb_io.c: In function 'kdb_getstr': kernel/debug/kdb/kdb_io.c:449:3: warning: 'strncpy' specified bound 256 equals destination size [-Wstringop-truncation] strncpy(kdb_prompt_str, prompt, CMD_BUFLEN); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Signed-off-by: Wenlin Kang <[email protected]> Signed-off-by: Daniel Thompson <[email protected]>
2019-05-12kdb: do a sanity check on the cpu in kdb_per_cpu()Dan Carpenter1-1/+1
The "whichcpu" comes from argv[3]. The cpu_online() macro looks up the cpu in a bitmap of online cpus, but if the value is too high then it could read beyond the end of the bitmap and possibly Oops. Fixes: 5d5314d6795f ("kdb: core for kgdb back end (1 of 2)") Signed-off-by: Dan Carpenter <[email protected]> Reviewed-by: Douglas Anderson <[email protected]> Signed-off-by: Daniel Thompson <[email protected]>
2019-05-12kdb: Get rid of broken attempt to print CCVERSION in kdb summaryDouglas Anderson2-2/+0
If you drop into kdb and type "summary", it prints out a line that says this: ccversion CCVERSION ...and I don't mean that it actually prints out the version of the C compiler. It literally prints out the string "CCVERSION". The version of the C Compiler is already printed at boot up and it doesn't seem useful to replicate this in kdb. Let's just delete it. We can also delete the bit of the Makefile that called the C compiler in an attempt to pass this into kdb. This will remove one extra call to the C compiler at Makefile parse time and (very slightly) speed up builds. Signed-off-by: Douglas Anderson <[email protected]> Reviewed-by: Masahiro Yamada <[email protected]> Signed-off-by: Daniel Thompson <[email protected]>
2019-05-02kdb: kdb_support: replace strcpy() by strscpy()Gustavo A. R. Silva1-1/+1
The strcpy() function is being deprecated. Replace it by the safer strscpy() and fix the following Coverity warning: "You might overrun the 129-character fixed-size string ks_namebuf by copying name without checking the length." Addresses-Coverity-ID: 138995 ("Copy into fixed size buffer") Signed-off-by: Gustavo A. R. Silva <[email protected]> Signed-off-by: Daniel Thompson <[email protected]>
2019-05-02gdbstub: Replace strcpy() by strscpy()Gustavo A. R. Silva1-2/+2
The strcpy() function is being deprecated. Replace it by the safer strscpy() and fix the following Coverity warning: "You might overrun the 1024-character fixed-size string remcom_in_buffer by copying cmd without checking the length." Addresses-Coverity-ID: 138999 ("Copy into fixed size buffer") Signed-off-by: Gustavo A. R. Silva <[email protected]> Signed-off-by: Daniel Thompson <[email protected]>
2019-05-02gdbstub: mark expected switch fall-throughsGustavo A. R. Silva1-2/+3
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. This patch fixes the following warnings: kernel/debug/gdbstub.c: In function ‘gdb_serial_stub’: kernel/debug/gdbstub.c:1031:7: warning: this statement may fall through [-Wimplicit-fallthrough=] if (remcom_in_buffer[1] == '\0') { ^ kernel/debug/gdbstub.c:1036:3: note: here case 'C': /* Exception passing */ ^~~~ kernel/debug/gdbstub.c:1040:7: warning: this statement may fall through [-Wimplicit-fallthrough=] if (tmp == 0) ^ kernel/debug/gdbstub.c:1043:3: note: here case 'c': /* Continue packet */ ^~~~ kernel/debug/gdbstub.c:1050:4: warning: this statement may fall through [-Wimplicit-fallthrough=] dbg_activate_sw_breakpoints(); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ kernel/debug/gdbstub.c:1052:3: note: here default: ^~~~~~~ Warning level 3 was used: -Wimplicit-fallthrough=3 Notice that, in this particular case, the code comment is modified in accordance with what GCC is expecting to find. This patch is part of the ongoing efforts to enable -Wimplicit-fallthrough. Signed-off-by: Gustavo A. R. Silva <[email protected]> Acked-by: Jason Wessel <[email protected]> Signed-off-by: Daniel Thompson <[email protected]>
2018-12-30kdb: use bool for binary state indicatorsNicholas Mc Guire1-7/+7
defcmd_in_progress is the state trace for command group processing - within a command group or not - usable is an indicator if a command set is valid (allocated/non-empty) - so use a bool for those binary indication here. Signed-off-by: Nicholas Mc Guire <[email protected]> Reviewed-by: Daniel Thompson <[email protected]> Signed-off-by: Daniel Thompson <[email protected]>
2018-12-30kdb: Don't back trace on a cpu that didn't round upDouglas Anderson3-8/+14
If you have a CPU that fails to round up and then run 'btc' you'll end up crashing in kdb becaue we dereferenced NULL. Let's add a check. It's wise to also set the task to NULL when leaving the debugger so that if we fail to round up on a later entry into the debugger we won't backtrace a stale task. Signed-off-by: Douglas Anderson <[email protected]> Acked-by: Daniel Thompson <[email protected]> Signed-off-by: Daniel Thompson <[email protected]>
2018-12-30kgdb: Don't round up a CPU that failed rounding up beforeDouglas Anderson2-1/+20
If we're using the default implementation of kgdb_roundup_cpus() that uses smp_call_function_single_async() we can end up hanging kgdb_roundup_cpus() if we try to round up a CPU that failed to round up before. Specifically smp_call_function_single_async() will try to wait on the csd lock for the CPU that we're trying to round up. If the previous round up never finished then that lock could still be held and we'll just sit there hanging. There's not a lot of use trying to round up a CPU that failed to round up before. Let's keep a flag that indicates whether the CPU started but didn't finish to round up before. If we see that flag set then we'll skip the next round up. In general we have a few goals here: - We never want to end up calling smp_call_function_single_async() when the csd is still locked. This is accomplished because flush_smp_call_function_queue() unlocks the csd _before_ invoking the callback. That means that when kgdb_nmicallback() runs we know for sure the the csd is no longer locked. Thus when we set "rounding_up = false" we know for sure that the csd is unlocked. - If there are no timeouts rounding up we should never skip a round up. NOTE #1: In general trying to continue running after failing to round up CPUs doesn't appear to be supported in the debugger. When I simulate this I find that kdb reports "Catastrophic error detected" when I try to continue. I can overrule and continue anyway, but it should be noted that we may be entering the land of dragons here. Possibly the "Catastrophic error detected" was added _because_ of the future failure to round up, but even so this is an area of the code that hasn't been strongly tested. NOTE #2: I did a bit of testing before and after this change. I introduced a 10 second hang in the kernel while holding a spinlock that I could invoke on a certain CPU with 'taskset -c 3 cat /sys/...". Before this change if I did: - Invoke hang - Enter debugger - g (which warns about Catastrophic error, g again to go anyway) - g - Enter debugger ...I'd hang the rest of the 10 seconds without getting a debugger prompt. After this change I end up in the debugger the 2nd time after only 1 second with the standard warning about 'Timed out waiting for secondary CPUs.' I'll also note that once the CPU finished waiting I could actually debug it (aka "btc" worked) I won't promise that everything works perfectly if the errant CPU comes back at just the wrong time (like as we're entering or exiting the debugger) but it certainly seems like an improvement. NOTE #3: setting 'kgdb_info[cpu].rounding_up = false' is in kgdb_nmicallback() instead of kgdb_call_nmi_hook() because some implementations override kgdb_call_nmi_hook(). It shouldn't hurt to have it in kgdb_nmicallback() in any case. NOTE #4: this logic is really only needed because there is no API call like "smp_try_call_function_single_async()" or "smp_csd_is_locked()". If such an API existed then we'd use it instead, but it seemed a bit much to add an API like this just for kgdb. Signed-off-by: Douglas Anderson <[email protected]> Acked-by: Daniel Thompson <[email protected]> Signed-off-by: Daniel Thompson <[email protected]>
2018-12-30kgdb: Fix kgdb_roundup_cpus() for arches who used smp_call_function()Douglas Anderson1-0/+41
When I had lockdep turned on and dropped into kgdb I got a nice splat on my system. Specifically it hit: DEBUG_LOCKS_WARN_ON(current->hardirq_context) Specifically it looked like this: sysrq: SysRq : DEBUG ------------[ cut here ]------------ DEBUG_LOCKS_WARN_ON(current->hardirq_context) WARNING: CPU: 0 PID: 0 at .../kernel/locking/lockdep.c:2875 lockdep_hardirqs_on+0xf0/0x160 CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.19.0 #27 pstate: 604003c9 (nZCv DAIF +PAN -UAO) pc : lockdep_hardirqs_on+0xf0/0x160 ... Call trace: lockdep_hardirqs_on+0xf0/0x160 trace_hardirqs_on+0x188/0x1ac kgdb_roundup_cpus+0x14/0x3c kgdb_cpu_enter+0x53c/0x5cc kgdb_handle_exception+0x180/0x1d4 kgdb_compiled_brk_fn+0x30/0x3c brk_handler+0x134/0x178 do_debug_exception+0xfc/0x178 el1_dbg+0x18/0x78 kgdb_breakpoint+0x34/0x58 sysrq_handle_dbg+0x54/0x5c __handle_sysrq+0x114/0x21c handle_sysrq+0x30/0x3c qcom_geni_serial_isr+0x2dc/0x30c ... ... irq event stamp: ...45 hardirqs last enabled at (...44): [...] __do_softirq+0xd8/0x4e4 hardirqs last disabled at (...45): [...] el1_irq+0x74/0x130 softirqs last enabled at (...42): [...] _local_bh_enable+0x2c/0x34 softirqs last disabled at (...43): [...] irq_exit+0xa8/0x100 ---[ end trace adf21f830c46e638 ]--- Looking closely at it, it seems like a really bad idea to be calling local_irq_enable() in kgdb_roundup_cpus(). If nothing else that seems like it could violate spinlock semantics and cause a deadlock. Instead, let's use a private csd alongside smp_call_function_single_async() to round up the other CPUs. Using smp_call_function_single_async() doesn't require interrupts to be enabled so we can remove the offending bit of code. In order to avoid duplicating this across all the architectures that use the default kgdb_roundup_cpus(), we'll add a "weak" implementation to debug_core.c. Looking at all the people who previously had copies of this code, there were a few variants. I've attempted to keep the variants working like they used to. Specifically: * For arch/arc we passed NULL to kgdb_nmicallback() instead of get_irq_regs(). * For arch/mips there was a bit of extra code around kgdb_nmicallback() NOTE: In this patch we will still get into trouble if we try to round up a CPU that failed to round up before. We'll try to round it up again and potentially hang when we try to grab the csd lock. That's not new behavior but we'll still try to do better in a future patch. Suggested-by: Daniel Thompson <[email protected]> Signed-off-by: Douglas Anderson <[email protected]> Cc: Vineet Gupta <[email protected]> Cc: Russell King <[email protected]> Cc: Catalin Marinas <[email protected]> Cc: Will Deacon <[email protected]> Cc: Richard Kuo <[email protected]> Cc: Ralf Baechle <[email protected]> Cc: Paul Burton <[email protected]> Cc: James Hogan <[email protected]> Cc: Benjamin Herrenschmidt <[email protected]> Cc: Paul Mackerras <[email protected]> Cc: Michael Ellerman <[email protected]> Cc: Yoshinori Sato <[email protected]> Cc: Rich Felker <[email protected]> Cc: "David S. Miller" <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Borislav Petkov <[email protected]> Cc: "H. Peter Anvin" <[email protected]> Acked-by: Will Deacon <[email protected]> Signed-off-by: Daniel Thompson <[email protected]>
2018-12-30kgdb: Remove irq flags from roundupDouglas Anderson1-1/+1
The function kgdb_roundup_cpus() was passed a parameter that was documented as: > the flags that will be used when restoring the interrupts. There is > local_irq_save() call before kgdb_roundup_cpus(). Nobody used those flags. Anyone who wanted to temporarily turn on interrupts just did local_irq_enable() and local_irq_disable() without looking at them. So we can definitely remove the flags. Signed-off-by: Douglas Anderson <[email protected]> Cc: Vineet Gupta <[email protected]> Cc: Russell King <[email protected]> Cc: Catalin Marinas <[email protected]> Cc: Will Deacon <[email protected]> Cc: Richard Kuo <[email protected]> Cc: Ralf Baechle <[email protected]> Cc: Paul Burton <[email protected]> Cc: James Hogan <[email protected]> Cc: Benjamin Herrenschmidt <[email protected]> Cc: Paul Mackerras <[email protected]> Cc: Michael Ellerman <[email protected]> Cc: Yoshinori Sato <[email protected]> Cc: Rich Felker <[email protected]> Cc: "David S. Miller" <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Borislav Petkov <[email protected]> Cc: "H. Peter Anvin" <[email protected]> Acked-by: Will Deacon <[email protected]> Signed-off-by: Daniel Thompson <[email protected]>
2018-11-13kdb: kdb_support: mark expected switch fall-throughsGustavo A. R. Silva1-3/+3
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Notice that in this particular case, I replaced the code comments with a proper "fall through" annotation, which is what GCC is expecting to find. Signed-off-by: Gustavo A. R. Silva <[email protected]> Reviewed-by: Daniel Thompson <[email protected]> Signed-off-by: Daniel Thompson <[email protected]>
2018-11-13kdb: kdb_keyboard: mark expected switch fall-throughsGustavo A. R. Silva1-2/+2
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Notice that in this particular case, I replaced the code comments with a proper "fall through" annotation, which is what GCC is expecting to find. Signed-off-by: Gustavo A. R. Silva <[email protected]> Reviewed-by: Daniel Thompson <[email protected]> Signed-off-by: Daniel Thompson <[email protected]>
2018-11-13kdb: kdb_main: refactor code in kdb_md_lineGustavo A. R. Silva1-18/+3
Replace the whole switch statement with a for loop. This makes the code clearer and easy to read. This also addresses the following Coverity warnings: Addresses-Coverity-ID: 115090 ("Missing break in switch") Addresses-Coverity-ID: 115091 ("Missing break in switch") Addresses-Coverity-ID: 114700 ("Missing break in switch") Suggested-by: Daniel Thompson <[email protected]> Signed-off-by: Gustavo A. R. Silva <[email protected]> Reviewed-by: Daniel Thompson <[email protected]> [[email protected]: Tiny grammar change in description] Signed-off-by: Daniel Thompson <[email protected]>
2018-11-13kdb: Use strscpy with destination buffer sizePrarit Bhargava3-12/+15
gcc 8.1.0 warns with: kernel/debug/kdb/kdb_support.c: In function ‘kallsyms_symbol_next’: kernel/debug/kdb/kdb_support.c:239:4: warning: ‘strncpy’ specified bound depends on the length of the source argument [-Wstringop-overflow=] strncpy(prefix_name, name, strlen(name)+1); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ kernel/debug/kdb/kdb_support.c:239:31: note: length computed here Use strscpy() with the destination buffer size, and use ellipses when displaying truncated symbols. v2: Use strscpy() Signed-off-by: Prarit Bhargava <[email protected]> Cc: Jonathan Toppins <[email protected]> Cc: Jason Wessel <[email protected]> Cc: Daniel Thompson <[email protected]> Cc: [email protected] Reviewed-by: Daniel Thompson <[email protected]> Signed-off-by: Daniel Thompson <[email protected]>
2018-11-13kdb: print real address of pointers instead of hashed addressesChristophe Leroy2-13/+13
Since commit ad67b74d2469 ("printk: hash addresses printed with %p"), all pointers printed with %p are printed with hashed addresses instead of real addresses in order to avoid leaking addresses in dmesg and syslog. But this applies to kdb too, with is unfortunate: Entering kdb (current=0x(ptrval), pid 329) due to Keyboard Entry kdb> ps 15 sleeping system daemon (state M) processes suppressed, use 'ps A' to see all. Task Addr Pid Parent [*] cpu State Thread Command 0x(ptrval) 329 328 1 0 R 0x(ptrval) *sh 0x(ptrval) 1 0 0 0 S 0x(ptrval) init 0x(ptrval) 3 2 0 0 D 0x(ptrval) rcu_gp 0x(ptrval) 4 2 0 0 D 0x(ptrval) rcu_par_gp 0x(ptrval) 5 2 0 0 D 0x(ptrval) kworker/0:0 0x(ptrval) 6 2 0 0 D 0x(ptrval) kworker/0:0H 0x(ptrval) 7 2 0 0 D 0x(ptrval) kworker/u2:0 0x(ptrval) 8 2 0 0 D 0x(ptrval) mm_percpu_wq 0x(ptrval) 10 2 0 0 D 0x(ptrval) rcu_preempt The whole purpose of kdb is to debug, and for debugging real addresses need to be known. In addition, data displayed by kdb doesn't go into dmesg. This patch replaces all %p by %px in kdb in order to display real addresses. Fixes: ad67b74d2469 ("printk: hash addresses printed with %p") Cc: <[email protected]> Signed-off-by: Christophe Leroy <[email protected]> Signed-off-by: Daniel Thompson <[email protected]>
2018-11-13kdb: use correct pointer when 'btc' calls 'btt'Christophe Leroy1-2/+2
On a powerpc 8xx, 'btc' fails as follows: Entering kdb (current=0x(ptrval), pid 282) due to Keyboard Entry kdb> btc btc: cpu status: Currently on cpu 0 Available cpus: 0 kdb_getarea: Bad address 0x0 when booting the kernel with 'debug_boot_weak_hash', it fails as well Entering kdb (current=0xba99ad80, pid 284) due to Keyboard Entry kdb> btc btc: cpu status: Currently on cpu 0 Available cpus: 0 kdb_getarea: Bad address 0xba99ad80 On other platforms, Oopses have been observed too, see https://github.com/linuxppc/linux/issues/139 This is due to btc calling 'btt' with %p pointer as an argument. This patch replaces %p by %px to get the real pointer value as expected by 'btt' Fixes: ad67b74d2469 ("printk: hash addresses printed with %p") Cc: <[email protected]> Signed-off-by: Christophe Leroy <[email protected]> Reviewed-by: Daniel Thompson <[email protected]> Signed-off-by: Daniel Thompson <[email protected]>
2018-10-26sched: loadavg: consolidate LOAD_INT, LOAD_FRAC, CALC_LOADJohannes Weiner1-6/+1
There are several definitions of those functions/macros in places that mess with fixed-point load averages. Provide an official version. [[email protected]: fix missed conversion in block/blk-iolatency.c] Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Johannes Weiner <[email protected]> Acked-by: Peter Zijlstra (Intel) <[email protected]> Tested-by: Suren Baghdasaryan <[email protected]> Tested-by: Daniel Drake <[email protected]> Cc: Christopher Lameter <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Johannes Weiner <[email protected]> Cc: Mike Galbraith <[email protected]> Cc: Peter Enderborg <[email protected]> Cc: Randy Dunlap <[email protected]> Cc: Shakeel Butt <[email protected]> Cc: Tejun Heo <[email protected]> Cc: Vinayak Menon <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2018-06-12treewide: kzalloc() -> kcalloc()Kees Cook1-1/+1
The kzalloc() function has a 2-factor argument form, kcalloc(). This patch replaces cases of: kzalloc(a * b, gfp) with: kcalloc(a * b, gfp) as well as handling cases of: kzalloc(a * b * c, gfp) with: kzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kzalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(char) * COUNT + COUNT , ...) | kzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc + kcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc(C1 * C2 * C3, ...) | kzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc(sizeof(THING) * C2, ...) | kzalloc(sizeof(TYPE) * C2, ...) | kzalloc(C1 * C2 * C3, ...) | kzalloc(C1 * C2, ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - (E1) * E2 + E1, E2 , ...) | - kzalloc + kcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc + kcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <[email protected]>
2018-06-12treewide: kmalloc() -> kmalloc_array()Kees Cook1-4/+7
The kmalloc() function has a 2-factor argument form, kmalloc_array(). This patch replaces cases of: kmalloc(a * b, gfp) with: kmalloc_array(a * b, gfp) as well as handling cases of: kmalloc(a * b * c, gfp) with: kmalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kmalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kmalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The tools/ directory was manually excluded, since it has its own implementation of kmalloc(). The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kmalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kmalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kmalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(char) * COUNT + COUNT , ...) | kmalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kmalloc + kmalloc_array ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kmalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kmalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kmalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kmalloc(C1 * C2 * C3, ...) | kmalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kmalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kmalloc(sizeof(THING) * C2, ...) | kmalloc(sizeof(TYPE) * C2, ...) | kmalloc(C1 * C2 * C3, ...) | kmalloc(C1 * C2, ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - (E1) * E2 + E1, E2 , ...) | - kmalloc + kmalloc_array ( - (E1) * (E2) + E1, E2 , ...) | - kmalloc + kmalloc_array ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <[email protected]>
2018-04-12Merge tag 'for_linus-4.16' of ↵Linus Torvalds3-53/+44
git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/kgdb Pull kdb updates from Jason Wessel: - fix 2032 time access issues and new compiler warnings - minor regression test cleanup - formatting fixes for end user use of kdb * tag 'for_linus-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/kgdb: kdb: use memmove instead of overlapping memcpy kdb: use ktime_get_mono_fast_ns() instead of ktime_get_ts() kdb: bl: don't use tab character in output kdb: drop newline in unknown command output kdb: make "mdr" command repeat kdb: use __ktime_get_real_seconds instead of __current_kernel_time misc: kgdbts: Display progress of asynchronous tests
2018-02-04kdb: use memmove instead of overlapping memcpyArnd Bergmann1-2/+2
gcc discovered that the memcpy() arguments in kdbnearsym() overlap, so we should really use memmove(), which is defined to handle that correctly: In function 'memcpy', inlined from 'kdbnearsym' at /git/arm-soc/kernel/debug/kdb/kdb_support.c:132:4: /git/arm-soc/include/linux/string.h:353:9: error: '__builtin_memcpy' accessing 792 bytes at offsets 0 and 8 overlaps 784 bytes at offset 8 [-Werror=restrict] return __builtin_memcpy(p, q, size); Signed-off-by: Arnd Bergmann <[email protected]> Signed-off-by: Jason Wessel <[email protected]>
2018-01-31kdb: use ktime_get_mono_fast_ns() instead of ktime_get_ts()Baolin Wang1-3/+3
The kdb code will print the monotonic time by ktime_get_ts(), but the ktime_get_ts() will be protected by a sequence lock, that will introduce one deadlock risk if the lock was already held in the context from which we entered the debugger. Thus we can use the ktime_get_mono_fast_ns() to get the monotonic time, which is NMI safe access to clock monotonic. Moreover we can remove the 'struct timespec', which is not y2038 safe. Signed-off-by: Baolin Wang <[email protected]> Reviewed-by: Daniel Thompson <[email protected]> Reviewed-by: Arnd Bergmann <[email protected]> Signed-off-by: Jason Wessel <[email protected]>
2018-01-25kdb: bl: don't use tab character in outputRandy Dunlap1-2/+2
The "bl" (list breakpoints) command prints a '\t' (tab) character in its output, but on a console (video device), that just prints some odd graphics character. Instead of printing a tab character, just align the output with spaces. Signed-off-by: Randy Dunlap <[email protected]> Cc: Daniel Thompson <[email protected]> Cc: Jason Wessel <[email protected]> Cc: [email protected] Signed-off-by: Jason Wessel <[email protected]>
2018-01-25kdb: drop newline in unknown command outputRandy Dunlap1-0/+11
When an unknown command is entered, kdb prints "Unknown kdb command:" and then the unknown text, including the newline character. This causes the ending single-quote mark to be printed on the next line by itself, so just change the ending newline character to a null character (end of string) so that it won't be "printed." Signed-off-by: Randy Dunlap <[email protected]> Cc: Daniel Thompson <[email protected]> Cc: Jason Wessel <[email protected]> Cc: [email protected] Signed-off-by: Jason Wessel <[email protected]>
2018-01-25kdb: make "mdr" command repeatRandy Dunlap1-6/+21
The "mdr" command should repeat (continue) when only Enter/Return is pressed, so make it do so. Signed-off-by: Randy Dunlap <[email protected]> Cc: Daniel Thompson <[email protected]> Cc: Jason Wessel <[email protected]> Cc: [email protected] Signed-off-by: Jason Wessel <[email protected]>
2018-01-25kdb: use __ktime_get_real_seconds instead of __current_kernel_timeArnd Bergmann1-40/+5
kdb is the only user of the __current_kernel_time() interface, which is not y2038 safe and should be removed at some point. The kdb code also goes to great lengths to print the time in a human-readable format from 'struct timespec', again using a non-y2038-safe re-implementation of the generic time_to_tm() code. Using __current_kernel_time() here is necessary since the regular accessors that require a sequence lock might hang when called during the xtime update. However, this is safe in the particular case since kdb is only interested in the tv_sec field that is updated atomically. In order to make this y2038-safe, I'm converting the code to the generic time64_to_tm helper, but that introduces the problem that we have no interface like __current_kernel_time() that provides a 64-bit timestamp in a lockless, safe and architecture-independent way. I have multiple ideas for how to solve that: - __ktime_get_real_seconds() is lockless, but can return incorrect results on 32-bit architectures in the special case that we are in the process of changing the time across the epoch, either during the timer tick that overflows the seconds in 2038, or while calling settimeofday. - ktime_get_real_fast_ns() would work in this context, but does require a call into the clocksource driver to return a high-resolution timestamp. This may have undesired side-effects in the debugger, since we want to limit the interactions with the rest of the kernel. - Adding a ktime_get_real_fast_seconds() based on tk_fast_mono plus tkr->base_real without the tk_clock_read() delta. Not sure about the value of adding yet another interface here. - Changing the existing ktime_get_real_seconds() to use tk_fast_mono on 32-bit architectures rather than xtime_sec. I think this could work, but am not entirely sure if this is an improvement. I picked the first of those for simplicity here. It's technically not correct but probably good enough as the time is only used for the debugging output and the race will likely never be hit in practice. Another downside is having to move the declaration into a public header file. Let me know if anyone has a different preference. Cc: Andy Shevchenko <[email protected]> Link: https://patchwork.kernel.org/patch/9775309/ Signed-off-by: Arnd Bergmann <[email protected]> Signed-off-by: Jason Wessel <[email protected]>
2018-01-03signal: Simplify and fix kdb_send_sigEric W. Biederman2-9/+3
- Rename from kdb_send_sig_info to kdb_send_sig As there is no meaningful siginfo sent - Use SEND_SIG_PRIV instead of generating a siginfo for a kdb signal. The generated siginfo had a bogus rationale and was not correct in the face of pid namespaces. SEND_SIG_PRIV is simpler and actually correct. - As the code grabs siglock just send the signal with siglock held instead of dropping siglock and attempting to grab it again. - Move the sig_valid test into kdb_kill where it can generate a good error message. Signed-off-by: Eric W. Biederman <[email protected]>
2017-12-06kdb: Fix handling of kallsyms_symbol_next() return valueDaniel Thompson1-1/+1
kallsyms_symbol_next() returns a boolean (true on success). Currently kdb_read() tests the return value with an inequality that unconditionally evaluates to true. This is fixed in the obvious way and, since the conditional branch is supposed to be unreachable, we also add a WARN_ON(). Reported-by: Dan Carpenter <[email protected]> Signed-off-by: Daniel Thompson <[email protected]> Cc: linux-stable <[email protected]> Signed-off-by: Jason Wessel <[email protected]>
2017-03-02sched/headers: Prepare for new header dependencies before moving code to ↵Ingo Molnar2-0/+2
<linux/sched/debug.h> We are going to split <linux/sched/debug.h> out of <linux/sched.h>, which will have to be picked up from other headers and a couple of .c files. Create a trivial placeholder <linux/sched/debug.h> file that just maps to <linux/sched.h> to make this patch obviously correct and bisectable. Include the new header in the files that are going to need it. Acked-by: Linus Torvalds <[email protected]> Cc: Mike Galbraith <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: [email protected] Signed-off-by: Ingo Molnar <[email protected]>
2017-03-02sched/headers: Prepare for new header dependencies before moving code to ↵Ingo Molnar1-0/+1
<linux/sched/stat.h> We are going to split <linux/sched/stat.h> out of <linux/sched.h>, which will have to be picked up from other headers and a couple of .c files. Create a trivial placeholder <linux/sched/stat.h> file that just maps to <linux/sched.h> to make this patch obviously correct and bisectable. Include the new header in the files that are going to need it. Acked-by: Linus Torvalds <[email protected]> Cc: Mike Galbraith <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: [email protected] Signed-off-by: Ingo Molnar <[email protected]>
2017-03-02sched/headers: Prepare for new header dependencies before moving code to ↵Ingo Molnar1-0/+1
<linux/sched/nmi.h> We are going to move softlockup APIs out of <linux/sched.h>, which will have to be picked up from other headers and a couple of .c files. <linux/nmi.h> already includes <linux/sched.h>. Include the <linux/nmi.h> header in the files that are going to need it. Acked-by: Linus Torvalds <[email protected]> Cc: Mike Galbraith <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: [email protected] Signed-off-by: Ingo Molnar <[email protected]>
2017-03-02sched/headers: Prepare for new header dependencies before moving code to ↵Ingo Molnar2-1/+2
<linux/sched/signal.h> We are going to split <linux/sched/signal.h> out of <linux/sched.h>, which will have to be picked up from other headers and a couple of .c files. Create a trivial placeholder <linux/sched/signal.h> file that just maps to <linux/sched.h> to make this patch obviously correct and bisectable. Include the new header in the files that are going to need it. Acked-by: Linus Torvalds <[email protected]> Cc: Mike Galbraith <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: [email protected] Signed-off-by: Ingo Molnar <[email protected]>
2017-03-02sched/headers: Prepare for new header dependencies before moving code to ↵Ingo Molnar1-0/+1
<linux/sched/loadavg.h> We are going to split <linux/sched/loadavg.h> out of <linux/sched.h>, which will have to be picked up from a couple of .c files. Create a trivial placeholder <linux/sched/topology.h> file that just maps to <linux/sched.h> to make this patch obviously correct and bisectable. Include the new header in the files that are going to need it. Acked-by: Linus Torvalds <[email protected]> Cc: Mike Galbraith <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: [email protected] Signed-off-by: Ingo Molnar <[email protected]>
2017-03-02mm/vmacache, sched/headers: Introduce 'struct vmacache' and move it from ↵Ingo Molnar1-2/+2
<linux/sched.h> to <linux/mm_types> The <linux/sched.h> header includes various vmacache related defines, which are arguably misplaced. Move them to mm_types.h and minimize the sched.h impact by putting all task vmacache state into a new 'struct vmacache' structure. No change in functionality. Acked-by: Linus Torvalds <[email protected]> Cc: Mike Galbraith <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: [email protected] Signed-off-by: Ingo Molnar <[email protected]>
2016-12-14kdb: call vkdb_printf() from vprintk_default() only when wantedPetr Mladek1-7/+2
kdb_trap_printk allows to pass normal printk() messages to kdb via vkdb_printk(). For example, it is used to get backtrace using the classic show_stack(), see kdb_show_stack(). vkdb_printf() tries to avoid a potential infinite loop by disabling the trap. But this approach is racy, for example: CPU1 CPU2 vkdb_printf() // assume that kdb_trap_printk == 0 saved_trap_printk = kdb_trap_printk; kdb_trap_printk = 0; kdb_show_stack() kdb_trap_printk++; Problem1: Now, a nested printk() on CPU0 calls vkdb_printf() even when it should have been disabled. It will not cause a deadlock but... // using the outdated saved value: 0 kdb_trap_printk = saved_trap_printk; kdb_trap_printk--; Problem2: Now, kdb_trap_printk == -1 and will stay like this. It means that all messages will get passed to kdb from now on. This patch removes the racy saved_trap_printk handling. Instead, the recursion is prevented by a check for the locked CPU. The solution is still kind of racy. A non-related printk(), from another process, might get trapped by vkdb_printf(). And the wanted printk() might not get trapped because kdb_printf_cpu is assigned. But this problem existed even with the original code. A proper solution would be to get_cpu() before setting kdb_trap_printk and trap messages only from this CPU. I am not sure if it is worth the effort, though. In fact, the race is very theoretical. When kdb is running any of the commands that use kdb_trap_printk there is a single active CPU and the other CPUs should be in a holding pen inside kgdb_cpu_enter(). The only time this is violated is when there is a timeout waiting for the other CPUs to report to the holding pen. Finally, note that the situation is a bit schizophrenic. vkdb_printf() explicitly allows recursion but only from KDB code that calls kdb_printf() directly. On the other hand, the generic printk() recursion is not allowed because it might cause an infinite loop. This is why we could not hide the decision inside vkdb_printf() easily. Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Petr Mladek <[email protected]> Cc: Daniel Thompson <[email protected]> Cc: Jason Wessel <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Sergey Senozhatsky <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2016-12-14kdb: properly synchronize vkdb_printf() calls with other CPUsPetr Mladek2-18/+13
kdb_printf_lock does not prevent other CPUs from entering the critical section because it is ignored when KDB_STATE_PRINTF_LOCK is set. The problematic situation might look like: CPU0 CPU1 vkdb_printf() if (!KDB_STATE(PRINTF_LOCK)) KDB_STATE_SET(PRINTF_LOCK); spin_lock_irqsave(&kdb_printf_lock, flags); vkdb_printf() if (!KDB_STATE(PRINTF_LOCK)) BANG: The PRINTF_LOCK state is set and CPU1 is entering the critical section without spinning on the lock. The problem is that the code tries to implement locking using two state variables that are not handled atomically. Well, we need a custom locking because we want to allow reentering the critical section on the very same CPU. Let's use solution from Petr Zijlstra that was proposed for a similar scenario, see https://lkml.kernel.org/r/[email protected] This patch uses the same trick with cmpxchg(). The only difference is that we want to handle only recursion from the same context and therefore we disable interrupts. In addition, KDB_STATE_PRINTF_LOCK is removed. In fact, we are not able to set it a non-racy way. Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Petr Mladek <[email protected]> Reviewed-by: Daniel Thompson <[email protected]> Cc: Jason Wessel <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Sergey Senozhatsky <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2016-12-14kdb: remove unused kdb_event handlingPetr Mladek2-3/+0
kdb_event state variable is only set but never checked in the kernel code. http://www.spinics.net/lists/kdb/msg01733.html suggests that this variable affected WARN_CONSOLE_UNLOCKED() in the original implementation. But this check never went upstream. The semantic is unclear and racy. The value is updated after the kdb_printf_lock is acquired and after it is released. It should be symmetric at minimum. The value should be manipulated either inside or outside the locked area. Fortunately, it seems that the original function is gone and we could simply remove the state variable. Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Petr Mladek <[email protected]> Suggested-by: Daniel Thompson <[email protected]> Cc: Jason Wessel <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Sergey Senozhatsky <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2016-12-14kernel/debug/debug_core.c: more properly delay for secondary CPUsDouglas Anderson1-2/+2
We've got a delay loop waiting for secondary CPUs. That loop uses loops_per_jiffy. However, loops_per_jiffy doesn't actually mean how many tight loops make up a jiffy on all architectures. It is quite common to see things like this in the boot log: Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=24000) In my case I was seeing lots of cases where other CPUs timed out entering the debugger only to print their stack crawls shortly after the kdb> prompt was written. Elsewhere in kgdb we already use udelay(), so that should be safe enough to use to implement our timeout. We'll delay 1 ms for 1000 times, which should give us a full second of delay (just like the old code wanted) but allow us to notice that we're done every 1 ms. [[email protected]: simplifications, per Daniel] Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Douglas Anderson <[email protected]> Reviewed-by: Daniel Thompson <[email protected]> Cc: Jason Wessel <[email protected]> Cc: Brian Norris <[email protected]> Cc: <[email protected]> [4.0+] Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2016-12-12printk/kdb: handle more message headersPetr Mladek1-1/+1
Commit 4bcc595ccd80 ("printk: reinstate KERN_CONT for printing continuation lines") allows to define more message headers for a single message. The motivation is that continuous lines might get mixed. Therefore it make sense to define the right log level for every piece of a cont line. This patch introduces printk_skip_headers() that will skip all headers and uses it in the kdb code instead of printk_skip_level(). This approach helps to fix other printk_skip_level() users independently. Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Petr Mladek <[email protected]> Cc: Joe Perches <[email protected]> Cc: Sergey Senozhatsky <[email protected]> Cc: Steven Rostedt <[email protected]> Cc: Jason Wessel <[email protected]> Cc: Jaroslav Kysela <[email protected]> Cc: Takashi Iwai <[email protected]> Cc: Chris Mason <[email protected]> Cc: Josef Bacik <[email protected]> Cc: David Sterba <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2016-02-22mm/init: Add 'rodata=off' boot cmdline parameter to disable read-only kernel ↵Kees Cook1-3/+1
mappings It may be useful to debug writes to the readonly sections of memory, so provide a cmdline "rodata=off" to allow for this. This can be expanded in the future to support "log" and "write" modes, but that will need to be architecture-specific. This also makes KDB software breakpoints more usable, as read-only mappings can now be disabled on any kernel. Suggested-by: H. Peter Anvin <[email protected]> Signed-off-by: Kees Cook <[email protected]> Cc: Andy Lutomirski <[email protected]> Cc: Arnd Bergmann <[email protected]> Cc: Borislav Petkov <[email protected]> Cc: Brian Gerst <[email protected]> Cc: David Brown <[email protected]> Cc: Denys Vlasenko <[email protected]> Cc: Emese Revfy <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Mathias Krause <[email protected]> Cc: Michael Ellerman <[email protected]> Cc: PaX Team <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: [email protected] Cc: linux-arch <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Ingo Molnar <[email protected]>
2015-12-04module: use a structure to encapsulate layout.Rusty Russell1-2/+2
Makes it easier to handle init vs core cleanly, though the change is fairly invasive across random architectures. It simplifies the rbtree code immediately, however, while keeping the core data together in the same cachline (now iff the rbtree code is enabled). Acked-by: Peter Zijlstra <[email protected]> Reviewed-by: Josh Poimboeuf <[email protected]> Signed-off-by: Rusty Russell <[email protected]> Signed-off-by: Jiri Kosina <[email protected]>
2015-02-19debug: prevent entering debug mode on panic/exception.Colin Cross1-0/+17
On non-developer devices, kgdb prevents the device from rebooting after a panic. Incase of panics and exceptions, to allow the device to reboot, prevent entering debug mode to avoid getting stuck waiting for the user to interact with debugger. To avoid entering the debugger on panic/exception without any extra configuration, panic_timeout is being used which can be set via /proc/sys/kernel/panic at run time and CONFIG_PANIC_TIMEOUT sets the default value. Setting panic_timeout indicates that the user requested machine to perform unattended reboot after panic. We dont want to get stuck waiting for the user input incase of panic. Cc: Andrew Morton <[email protected]> Cc: [email protected] Cc: [email protected] Cc: Android Kernel Team <[email protected]> Cc: John Stultz <[email protected]> Cc: Sumit Semwal <[email protected]> Signed-off-by: Colin Cross <[email protected]> [Kiran: Added context to commit message. panic_timeout is used instead of break_on_panic and break_on_exception to honor CONFIG_PANIC_TIMEOUT Modified the commit as per community feedback] Signed-off-by: Kiran Raparthy <[email protected]> Signed-off-by: Daniel Thompson <[email protected]> Signed-off-by: Jason Wessel <[email protected]>
2015-02-19kdb: Const qualifier for kdb_getstr's prompt argumentDaniel Thompson2-2/+2
All current callers of kdb_getstr() can pass constant pointers via the prompt argument. This patch adds a const qualification to make explicit the fact that this is safe. Signed-off-by: Daniel Thompson <[email protected]> Signed-off-by: Jason Wessel <[email protected]>
2015-02-19kdb: Provide forward search at more promptDaniel Thompson3-5/+26
Currently kdb allows the output of comamnds to be filtered using the | grep feature. This is useful but does not permit the output emitted shortly after a string match to be examined without wading through the entire unfiltered output of the command. Such a feature is particularly useful to navigate function traces because these traces often have a useful trigger string *before* the point of interest. This patch reuses the existing filtering logic to introduce a simple forward search to kdb that can be triggered from the more prompt. Signed-off-by: Daniel Thompson <[email protected]> Signed-off-by: Jason Wessel <[email protected]>
2015-02-19kdb: Fix a prompt management bug when using | grepDaniel Thompson1-2/+2
Currently when the "| grep" feature is used to filter the output of a command then the prompt is not displayed for the subsequent command. Likewise any characters typed by the user are also not echoed to the display. This rather disconcerting problem eventually corrects itself when the user presses Enter and the kdb_grepping_flag is cleared as kdb_parse() tries to make sense of whatever they typed. This patch resolves the problem by moving the clearing of this flag from the middle of command processing to the beginning. Signed-off-by: Daniel Thompson <[email protected]> Signed-off-by: Jason Wessel <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.